Skip to main content

Browse the archive

Revision 9a765881bf3dcd32847d7108cf48cb04a4ed993f authored by Bjørn Mork on 10 October 2016, 19:12:49 UTC, committed by David S. Miller on 13 October 2016, 14:05:06 UTC 
qmi_wwan: add support for Quectel EC21 and EC25
 
The Quectel EC21 and EC25 need the same "set DTR" request as devices
based on the MDM9230 chipset, but has no USB3 support. Our best guess
is that the "set DTR" functionality depends on chipset and/or
baseband firmware generation. But USB3 is still an optional feature.

Since we cannot enable this unconditionally for all older devices, and
there doesn't appear to be anything we can use in the USB descriptors
to identify these chips, we are forced to use a device specific quirk
flag.

Reported-and-tested-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 4013bee
Raw File
initramfs_data.S 
/*
  initramfs_data includes the compressed binary that is the
  filesystem used for early user space.
  Note: Older versions of "as" (prior to binutils 2.11.90.0.23
  released on 2001-07-14) dit not support .incbin.
  If you are forced to use older binutils than that then the
  following trick can be applied to create the resulting binary:


  ld -m elf_i386  --format binary --oformat elf32-i386 -r \
  -T initramfs_data.scr initramfs_data.cpio.gz -o initramfs_data.o
   ld -m elf_i386  -r -o built-in.o initramfs_data.o

  For including the .init.ramfs sections, see include/asm-generic/vmlinux.lds.

  The above example is for i386 - the parameters vary from architectures.
  Eventually look up LDFLAGS_BLOB in an older version of the
  arch/$(ARCH)/Makefile to see the flags used before .incbin was introduced.

  Using .incbin has the advantage over ld that the correct flags are set
  in the ELF header, as required by certain architectures.
*/

#include <linux/stringify.h>
#include <asm-generic/vmlinux.lds.h>

.section .init.ramfs,"a"
__irf_start:
.incbin __stringify(INITRAMFS_IMAGE)
__irf_end:
.section .init.ramfs.info,"a"
.globl VMLINUX_SYMBOL(__initramfs_size)
VMLINUX_SYMBOL(__initramfs_size):
#ifdef CONFIG_64BIT
	.quad __irf_end - __irf_start
#else
	.long __irf_end - __irf_start
#endif
back to top