Revision 9b89f20b4a29d100c1a93c917102f0ed98380f5e authored by alex@thinkpad on 31 August 2017, 07:51:19 UTC, committed by alex@thinkpad on 31 August 2017, 07:51:19 UTC
note: the SRM allocator is very slow, so autodetection may not be the best way
1 parent 30a3a43
Makefile.user.default
#User-defined values for ML build system
#Copy me to Makefile.user, keeping ONLY the options that you want to customize
UNAME:=$(shell uname)
ifeq ($(UNAME), Darwin)
# Variable declaration for Mac OS X
UMOUNT=hdiutil unmount
CF_CARD="/Volumes/EOS_DIGITAL"
STAT_CMD=stat -f "%N: %z bytes"
else
# Default settings for remaining operating systems
UMOUNT=umount
# CF_CARD=/media/EOS_DIGITAL
CF_CARD:=$(shell mount | grep -oE "[^ ]+/EOS_DIGITAL[^ ]*")
STAT_CMD=stat -c "%n: %s bytes"
endif
# change this if you have to mount the card every time you run "make install"
# examples:
# MOUNT_CARD=gvfs-mount -d /dev/mmcblk0p1
# MOUNT_CARD=gvfs-mount dav://192.168.0.1/
MOUNT_CARD=
# Experimental setup for Wi-Fi SD cards
# to enable, run this before "make install":
# export WIFI_SD=y
# alternatives: "make install WIFI_SD=y", "WIFI_SD=y make install"
# override network names and IP address in Makefile.user
# fixme: how to enable it from Makefile.user?
ifeq ($(WIFI_SD),y)
# fill in the name of your regular wifi network
# leave this empty to disable wifi after installation
WIFI_MAIN_NETWORK=<your regular wifi network>
# these are for Toshiba FlashAir; you may have to change them for other wifi cards
# note: if the wifi card connects directly to a router and gets a fixed IP,
# just enter your regular wifi network name here as well
WIFI_CARD_NETWORK=flashair
WIFI_CARD_IP=192.168.0.1
CF_CARD=/run/user/1000/gvfs/dav:host=$(WIFI_CARD_IP),ssl=false
# executed before installation
# connect to WIFI_CARD_NETWORK if not already,
# and mount card directory via WebDAV
INSTALL_PREPARE=$(call build,WIFI_SET,\
if !(nmcli conn show --active | grep $(WIFI_CARD_NETWORK) > /dev/null); then \
while !(nmcli device wifi list | grep $(WIFI_CARD_NETWORK)); do \
if [ `nmcli radio wifi` = disabled ]; \
then nmcli radio wifi on; sleep 5; \
else nmcli dev wifi rescan 2>/dev/null || true; sleep 2; \
fi; \
echo -n "."; \
done; \
nmcli conn up $(WIFI_CARD_NETWORK); \
fi; \
if (ping -c 3 -l 3 $(WIFI_CARD_IP) > /dev/null) ; then \
if !(gvfs-mount -l | grep "dav://$(WIFI_CARD_IP)/"); then \
gvfs-mount dav://$(WIFI_CARD_IP)/ ; \
fi; \
else \
echo "$(WIFI_CARD_IP) appears to be offline." ; \
exit 1; \
fi; )
# restore connection to your main wifi network
# or just turn it off if you are using a wired network
WIFI_RESTORE=$(call build,WIFI_END,\
if [ "$(WIFI_MAIN_NETWORK)" = "" ]; then \
echo "Turning off Wi-Fi..."; \
nmcli radio wifi off; \
elif !(nmcli conn show --active | grep $(WIFI_MAIN_NETWORK) > /dev/null); then \
echo "Connecting to $(WIFI_MAIN_NETWORK)..."; \
nmcli conn up $(WIFI_MAIN_NETWORK); \
fi; )
UMOUNT_CARD=$(call build,UNMOUNT,while !(gvfs-mount -u dav://$(WIFI_CARD_IP)/); do sleep 2; done)
# executed after installation
define INSTALL_FINISH =
$(UMOUNT_CARD)
$(WIFI_RESTORE)
@echo "\nFinished.\nMake sure the camera will not write anything to the card until restart."
endef
endif
# Supported camera models
SUPPORTED_MODELS:=50D 60D 550D 600D 500D 5D2 5D3 7D 650D 700D EOSM 1100D 6D
# Supported camera models for "UNIFIED" builds (Digic IV only)
SUPPORTED_UNIFIED_MODELS:=50D 60D 550D 600D 500D 5D2 1100D
# GCC-related stuff
# for yagarto or the official ARM toolchain use ARM_ABI=none-eabi otherwise use ARM_ABI=elf
ARM_ABI=none-eabi
GCC_VERSION=-4.8.3
DIETLIB_VERSION=0.33
NEWLIB_OPT_LEVEL=O3
DIETLIBC_OPT_LEVEL=Os
ARM_PATH=~/gcc-arm-none-eabi-4_8-2013q4
ARM_BINPATH=$(ARM_PATH)/bin
ARM_LIBGCC_PATH=$(ARM_PATH)/lib/gcc/arm-$(ARM_ABI)/$(subst -,,$(GCC_VERSION))
NEWLIB_PATH=$(SRC_DIR)/libs/arm-$(ARM_ABI)-$(NEWLIB_OPT_LEVEL)
DIETLIBC_PATH=$(SRC_DIR)/libs/dietlib-$(DIETLIB_VERSION)-$(ARM_ABI)-$(DIETLIBC_OPT_LEVEL)
# Static libraries used
ARM_LIBGCC_A=$(ARM_LIBGCC_PATH)/libgcc.a
NEWLIB_LIBM_A=$(NEWLIB_PATH)/libm.a
NEWLIB_LIBC_A=$(NEWLIB_PATH)/libc.a
DIETLIBC_A=$(DIETLIBC_PATH)/dietlibc.a
ML_LIBC = dietlibc.a newlib-libc.a newlib-libm.a gcc-libgcc.a
CROSS_COMPILE=$(ARM_BINPATH)/arm-$(ARM_ABI)-
ifeq ($(OS),Windows_NT)
CC=$(CROSS_COMPILE)gcc$(GCC_VERSION).exe
else
CC=$(CROSS_COMPILE)gcc$(GCC_VERSION)
endif
OBJCOPY=$(CROSS_COMPILE)objcopy
OBJDUMP=$(CROSS_COMPILE)objdump
AR=$(CROSS_COMPILE)ar
RANLIB=$(CROSS_COMPILE)ranlib
READELF=$(CROSS_COMPILE)readelf
LD=$(CROSS_COMPILE)ld
STRIP=$(CROSS_COMPILE)strip
#
# Host compiler settings
#
HOST_CC=$(shell which gcc)
HOST_LD=$(shell which ld)
HOST_AR=$(shell which ar)
# You can customize CFLAG here
HOST_CFLAGS=-g -O3 -W -Wall -fms-extensions -std=c99
HOST_LFLAGS=
HOST_LIBS=
# large file support
# you can also get them with $(shell getconf LFS_CFLAGS)
HOST_LFS_FLAGS=-DLARGEFILES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
#
# mingw cross compiler settings
#
MINGW=i686-w64-mingw32
MINGW_GCC=$(MINGW)-gcc
MINGW_AR=$(MINGW)-ar
MINGW_CFLAGS=-g -O3 -W -Wall -fms-extensions -std=c99 -m32
MINGW_LFLAGS=
MINGW_LIBS=
MINGW_LFS_FLAGS=-DLARGEFILES -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
#
# Additional binaries
#
CCACHE=ccache
GREP=grep
AWK=awk
PYTHON=python2
RST2LATEX=rst2latex.py
# Naming convention for Magic Lantern builds:
# General rules:
# - Always specify the camera and its firmware version number in the build name (e.g. 550d.fw109)
# - For non-release builds, specify the build date and author's (nick)name.
# - For experimental builds, add a short keyword indicating the particular feature tested.
# Examples for experimental builds:
# magiclantern-2010dec07.550d.fw108.cropmarks.a1ex.zip
# magiclantern-2010nov23.550d.fw108.selectable-audio.piers.zip
# Example for pre-release builds:
# magiclantern-2010dec17.550d.fw109.PRERELEASE.alex.zip
# Release builds:
# magiclantern-0.2.0.rc1.550d.fw109.zip
#~ VERSION=0.2.0.rc1.550d.fw109
BUILDVER=$(shell whoami).$(shell hg id -i -r .)
VERSION:=Nightly.$(shell LC_TIME=EN date +'%Y%b%d').$(MODEL)$(FW_VERSION)
# Build configuration - untested and debug stuff handy for devs
CONFIG_PTP = n
CONFIG_PTP_CHDK = n
CONFIG_PTP_ML = n
ifndef CONFIG_GDB
CONFIG_GDB = n
endif
CONFIG_GDBSTUB = n
ifndef CONFIG_CONSOLE
CONFIG_CONSOLE = y
endif
CONFIG_DEBUGMSG = 0
CONFIG_CCACHE = n
CONFIG_TCC = y
CONFIG_MODULES = y
CONFIG_TINYPY = n
# Work in progress - would be nice to run the unmodified autoexec.bin in QEMU, but we are not there yet
# so, for now, we'll just hack the source code to work around the limitations of the emulator
CONFIG_QEMU = n
CONFIG_QEMU_MENU_SCREENSHOTS = n
# Work in progress - load ML as position-independent code (PIC)
CONFIG_PIC = n
# enable to save preprocessed C files (*.i)
# this applies to modules as well (but CONFIG entries are not)
PREPRO = n
# enable to turn off things not understood by pycparser
# for static analysis only; do not execute the resulting code!
# this applies to modules as well (but CONFIG entries are not)
PYCPARSER = n
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...