9471292 | Linus Torvalds | 30 October 2014, 16:11:38 UTC | Merge tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Although the diffstat looks scary, it's just because of the removal of the dead code (s6000), thus it must not affect anything serious. Other than that, all small fixes. The only core fix is zero-clear for a PCM compat ioctl. The rest are driver-specific, bebob, sgtl500, adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual" * tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add workaround for CMI8888 snoop behavior ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_get ALSA: hda/realtek - New SSID for Headset quirk ALSA: ad1889: Fix probable mask then right shift defects ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW ALSA: hda/realtek - Update restore default value for ALC283 ALSA: hda/realtek - Update restore default value for ALC282 ASoC: fsl: use strncpy() to prevent copying of over-long names ASoC: adau1761: Fix input PGA volume ASoC: s6000: remove driver ASoC: Intel: HSW/BDW only support S16 and S24 formats. ASoC: sgtl500: Document the required supplies | 30 October 2014, 16:11:38 UTC |
ae9e9c6 | Jan Kara | 30 October 2014, 14:53:17 UTC | ext4: make ext4_ext_convert_to_initialized() return proper number of blocks ext4_ext_convert_to_initialized() can return more blocks than are actually allocated from map->m_lblk in case where initial part of the on-disk extent is zeroed out. Luckily this doesn't have serious consequences because the caller currently uses the return value only to unmap metadata buffers. Anyway this is a data corruption/exposure problem waiting to happen so fix it. Coverity-id: 1226848 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 30 October 2014, 14:53:17 UTC |
4f879ca | Jan Kara | 30 October 2014, 14:53:17 UTC | ext4: bail early when clearing inode journal flag fails When clearing inode journal flag, we call jbd2_journal_flush() to force all the journalled data to their final locations. Currently we ignore when this fails and continue clearing inode journal flag. This isn't a big problem because when jbd2_journal_flush() fails, journal is likely aborted anyway. But it can still lead to somewhat confusing results so rather bail out early. Coverity-id: 989044 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 30 October 2014, 14:53:17 UTC |
6050d47 | Jan Kara | 30 October 2014, 14:53:17 UTC | ext4: bail out from make_indexed_dir() on first error When ext4_handle_dirty_dx_node() or ext4_handle_dirty_dirent_node() fail, there's really something wrong with the fs and there's no point in continuing further. Just return error from make_indexed_dir() in that case. Also initialize frames array so that if we return early due to error, dx_release() doesn't try to dereference uninitialized memory (which could happen also due to error in do_split()). Coverity-id: 741300 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org | 30 October 2014, 14:53:17 UTC |
d48458d | Theodore Ts'o | 30 October 2014, 14:53:17 UTC | jbd2: use a better hash function for the revoke table The old hash function didn't work well for 64-bit block numbers, and used undefined (negative) shift right behavior. Use the generic 64-bit hash function instead. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com> | 30 October 2014, 14:53:17 UTC |
a41537e | Dmitry Monakhov | 30 October 2014, 14:53:16 UTC | ext4: prevent bugon on race between write/fcntl O_DIRECT flags can be toggeled via fcntl(F_SETFL). But this value checked twice inside ext4_file_write_iter() and __generic_file_write() which result in BUG_ON inside ext4_direct_IO. Let's initialize iocb->private unconditionally. TESTCASE: xfstest:generic/036 https://patchwork.ozlabs.org/patch/402445/ #TYPICAL STACK TRACE: kernel BUG at fs/ext4/inode.c:2960! invalid opcode: 0000 [#1] SMP Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod CPU: 6 PID: 5505 Comm: aio-dio-fcntl-r Not tainted 3.17.0-rc2-00176-gff5c017 #161 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011 task: ffff88080e95a7c0 ti: ffff88080f908000 task.ti: ffff88080f908000 RIP: 0010:[<ffffffff811fabf2>] [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0 RSP: 0018:ffff88080f90bb58 EFLAGS: 00010246 RAX: 0000000000000400 RBX: ffff88080fdb2a28 RCX: 00000000a802c818 RDX: 0000040000080000 RSI: ffff88080d8aeb80 RDI: 0000000000000001 RBP: ffff88080f90bbc8 R08: 0000000000000000 R09: 0000000000001581 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88080d8aeb80 R13: ffff88080f90bbf8 R14: ffff88080fdb28c8 R15: ffff88080fdb2a28 FS: 00007f23b2055700(0000) GS:ffff880818400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f23b2045000 CR3: 000000080cedf000 CR4: 00000000000407e0 Stack: ffff88080f90bb98 0000000000000000 7ffffffffffffffe ffff88080fdb2c30 0000000000000200 0000000000000200 0000000000000001 0000000000000200 ffff88080f90bbc8 ffff88080fdb2c30 ffff88080f90be08 0000000000000200 Call Trace: [<ffffffff8112ca9d>] generic_file_direct_write+0xed/0x180 [<ffffffff8112f2b2>] __generic_file_write_iter+0x222/0x370 [<ffffffff811f495b>] ext4_file_write_iter+0x34b/0x400 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810abd94>] ? __lock_acquire+0x274/0x700 [<ffffffff811f4610>] ? ext4_unwritten_wait+0xb0/0xb0 [<ffffffff811bd756>] aio_run_iocb+0x286/0x410 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190 [<ffffffff811bc05b>] ? lookup_ioctx+0x4b/0xf0 [<ffffffff811bde3b>] do_io_submit+0x55b/0x740 [<ffffffff811bdcaa>] ? do_io_submit+0x3ca/0x740 [<ffffffff811be030>] SyS_io_submit+0x10/0x20 [<ffffffff815ce192>] system_call_fastpath+0x16/0x1b Code: 01 48 8b 80 f0 01 00 00 48 8b 18 49 8b 45 10 0f 85 f1 01 00 00 48 03 45 c8 48 3b 43 48 0f 8f e3 01 00 00 49 83 7c 24 18 00 75 04 <0f> 0b eb fe f0 ff 83 ec 01 00 00 49 8b 44 24 18 8b 00 85 c0 89 RIP [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0 RSP <ffff88080f90bb58> Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Cc: stable@vger.kernel.org | 30 October 2014, 14:53:16 UTC |
50460fe | Darrick J. Wong | 30 October 2014, 14:53:16 UTC | ext4: remove extent status procfs files if journal load fails If we can't load the journal, remove the procfs files for the extent status information file to avoid leaking resources. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org | 30 October 2014, 14:53:16 UTC |
6b992ff | Darrick J. Wong | 30 October 2014, 14:53:16 UTC | ext4: disallow changing journal_csum option during remount ext4 does not permit changing the metadata or journal checksum feature flag while mounted. Until we decide to support that, don't allow a remount to change the journal_csum flag (right now we silently fail to change anything). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 30 October 2014, 14:53:16 UTC |
98c1a75 | Darrick J. Wong | 30 October 2014, 14:53:16 UTC | ext4: enable journal checksum when metadata checksum feature enabled If metadata checksumming is turned on for the FS, we need to tell the journal to use checksumming too. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org | 30 October 2014, 14:53:16 UTC |
599a9b7 | Jan Kara | 30 October 2014, 14:53:16 UTC | ext4: fix oops when loading block bitmap failed When we fail to load block bitmap in __ext4_new_inode() we will dereference NULL pointer in ext4_journal_get_write_access(). So check for error from ext4_read_block_bitmap(). Coverity-id: 989065 Cc: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> | 30 October 2014, 14:53:16 UTC |
9378c67 | Jan Kara | 30 October 2014, 14:52:57 UTC | ext4: fix overflow when updating superblock backups after resize When there are no meta block groups update_backups() will compute the backup block in 32-bit arithmetics thus possibly overflowing the block number and corrupting the filesystem. OTOH filesystems without meta block groups larger than 16 TB should be rare. Fix the problem by doing the counting in 64-bit arithmetics. Coverity-id: 741252 CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Lukas Czerner <lczerner@redhat.com> | 30 October 2014, 14:52:57 UTC |
7809a61 | Jani Nikula | 29 October 2014, 09:03:26 UTC | drm/i915/dp: only use training pattern 3 on platforms that support it Ivybridge + 30" monitor prints a drm error on every modeset, since IVB doesn't support DP3 we should even bother trying to use it. This regression has been introduced in commit 06ea66b6bb445043dc25a9626254d5c130093199 Author: Todd Previte <tprevite@gmail.com> Date: Mon Jan 20 10:19:39 2014 -0700 drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable devices Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/1414566170-9868-1-git-send-email-airlied@gmail.com Cc: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org (3.15+) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 30 October 2014, 13:51:11 UTC |
a942535 | Tomi Valkeinen | 30 October 2014, 12:53:49 UTC | Merge branch '3.18/omapdss-fixes' into 3.18/fbdev-fixes | 30 October 2014, 12:53:49 UTC |
4ee9d9d | Marek Belisko | 27 October 2014, 20:24:03 UTC | omap: dss: connector-analog-tv: Add missing module device table Without that fix connector-analog-tv driver isn't probed when compiled as module. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> | 30 October 2014, 12:51:59 UTC |
e3215f0 | Emil Tantilov | 28 October 2014, 05:50:03 UTC | ixgbe: fix race when setting advertised speed Following commands: modprobe ixgbe ifconfig ethX up ethtool -s ethX advertise 0x020 can lead to "setup link failed with code -14" error due to the setup_link call racing with the SFP detection routine in the watchdog. This patch resolves this issue by protecting the setup_link call with check for __IXGBE_IN_SFP_INIT. Reported-by: Scott Harrison <scoharr2@cisco.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 30 October 2014, 12:12:07 UTC |
4d2fcfb | Junwei Zhang | 22 October 2014, 15:29:03 UTC | ixgbe: need not repeat init skb with NULL Signed-off-by: Martin Zhang <martinbj2008@gmail.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 30 October 2014, 12:04:39 UTC |
bc16e47 | Roman Gushchin | 23 October 2014, 03:32:27 UTC | igb: don't reuse pages with pfmemalloc flag Incoming packet is dropped silently by sk_filter(), if the skb was allocated from pfmemalloc reserves and the corresponding socket is not marked with the SOCK_MEMALLOC flag. Igb driver allocates pages for DMA with __skb_alloc_page(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, igb can get pages with pfmemalloc flag set. If an incoming packet hits the pfmemalloc page and is large enough (small packets are copying into the memory, allocated with netdev_alloc_skb_ip_align(), so they are not affected), it will be dropped. This behavior is ok under high memory pressure, but the problem is that the igb driver reuses these mapped pages. So, packets are still dropping even if all memory issues are gone and there is a plenty of free memory. In my case, some TCP sessions hang on a small percentage (< 0.1%) of machines days after OOMs. Fix this by avoiding reuse of such pages. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Tested-by: Aaron Brown "aaron.f.brown@intel.com" Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 30 October 2014, 11:56:52 UTC |
a22bb0b | Francesco Ruggeri | 22 October 2014, 15:29:24 UTC | e1000: unset IFF_UNICAST_FLT on WMware 82545EM VMWare's e1000 implementation does not seem to support unicast filtering. This can be observed by configuring a macvlan interface on eth0 in a VM in VMWare Fusion 5.0.5, and trying to use that interface instead of eth0. Tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 30 October 2014, 11:47:39 UTC |
21ee24b | Ingo Molnar | 30 October 2014, 06:37:37 UTC | Merge branch 'urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull two RCU fixes from Paul E. McKenney: " - Complete the work of commit dd56af42bd82 (rcu: Eliminate deadlock between CPU hotplug and expedited grace periods), which was intended to allow synchronize_sched_expedited() to be safely used when holding locks acquired by CPU-hotplug notifiers. This commit makes the put_online_cpus() avoid the deadlock instead of just handling the get_online_cpus(). - Complete the work of commit 35ce7f29a44a (rcu: Create rcuo kthreads only for onlined CPUs), which was intended to allow RCU to avoid allocating unneeded kthreads on systems where the firmware says that there are more CPUs than are really present. This commit makes rcu_barrier() aware of the mismatch, so that it doesn't hang waiting for non-existent CPUs. " Signed-off-by: Ingo Molnar <mingo@kernel.org> | 30 October 2014, 06:37:37 UTC |
d785452 | Ingo Molnar | 30 October 2014, 06:32:34 UTC | Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files without branch info (Jiri Olsa) - Add patch that should have went in a previous patchkit to use global cache provided by libunwind (Namhyung Kim) - Make CPUINFO_PROC an array to support different kernels, problem detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan) - 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 30 October 2014, 06:32:34 UTC |
89cf38d | Dmitry Eremin-Solenikov | 22 October 2014, 23:23:01 UTC | mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Brian Norris <computersforpeace@gmail.com> | 30 October 2014, 01:50:52 UTC |
0c53b4e | Frans Klaver | 27 October 2014, 14:34:05 UTC | mtd: omap: fix mtd devices not showing up Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver <frans.klaver@xsens.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> | 30 October 2014, 01:41:54 UTC |
a7ca10f | Linus Torvalds | 29 October 2014, 23:38:48 UTC | Merge branch 'akpm' (incoming from Andrew Morton) Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) mm/balloon_compaction: fix deflation when compaction is disabled sh: fix sh770x SCIF memory regions zram: avoid NULL pointer access in concurrent situation mm/slab_common: don't check for duplicate cache names ocfs2: fix d_splice_alias() return code checking mm: rmap: split out page_remove_file_rmap() mm: memcontrol: fix missed end-writeback page accounting mm: page-writeback: inline account_page_dirtied() into single caller lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}() drivers/rtc/rtc-bq32k.c: fix register value memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node() drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock kernel/kmod: fix use-after-free of the sub_info structure drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc mm, thp: fix collapsing of hugepages on madvise drivers: of: add return value to of_reserved_mem_device_init() mm: free compound page with correct order gcov: add ARM64 to GCOV_PROFILE_ALL fsnotify: next_i is freed during fsnotify_unmount_inodes. mm/compaction.c: avoid premature range skip in isolate_migratepages_range ... | 29 October 2014, 23:38:48 UTC |
4d88e6f | Konstantin Khlebnikov | 29 October 2014, 21:51:02 UTC | mm/balloon_compaction: fix deflation when compaction is disabled If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages with balloon and doesn't set PagePrivate flag, as a result balloon_page_dequeue() cannot get any pages because it thinks that all of them are isolated. Without balloon compaction nobody can isolate ballooned pages. It's safe to remove this check. Fixes: d6d86c0a7f8d ("mm/balloon_compaction: redesign ballooned pages management"). Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Matt Mullins <mmullins@mmlx.us> Cc: <stable@vger.kernel.org> [3.17] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
5417421 | Andriy Skulysh | 29 October 2014, 21:50:59 UTC | sh: fix sh770x SCIF memory regions Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf975be ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
5a99e95 | Weijie Yang | 29 October 2014, 21:50:57 UTC | zram: avoid NULL pointer access in concurrent situation There is a rare NULL pointer bug in mem_used_total_show() and mem_used_max_store() in concurrent situation, like this: zram is not initialized, process A is a mem_used_total reader which runs periodically, while process B try to init zram. process A process B access meta, get a NULL value init zram, done init_done() is true access meta->mem_pool, get a NULL pointer BUG This patch fixes this issue. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
8aba7e0 | Mikulas Patocka | 29 October 2014, 21:50:55 UTC | mm/slab_common: don't check for duplicate cache names The SLUB cache merges caches with the same size and alignment and there was long standing bug with this behavior: - create the cache named "foo" - create the cache named "bar" (which is merged with "foo") - delete the cache named "foo" (but it stays allocated because "bar" uses it) - create the cache named "foo" again - it fails because the name "foo" is already used That bug was fixed in commit 694617474e33 ("slab_common: fix the check for duplicate slab names") by not warning on duplicate cache names when the SLUB subsystem is used. Recently, cache merging was implemented the with SLAB subsystem too, in 12220dea07f1 ("mm/slab: support slab merge")). Therefore we need stop checking for duplicate names even for the SLAB subsystem. This patch fixes the bug by removing the check. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
d3556ba | Richard Weinberger | 29 October 2014, 21:50:53 UTC | ocfs2: fix d_splice_alias() return code checking d_splice_alias() can return a valid dentry, NULL or an ERR_PTR. Currently the code checks not for ERR_PTR and will cuase an oops in ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL(). Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
8186eb6 | Johannes Weiner | 29 October 2014, 21:50:51 UTC | mm: rmap: split out page_remove_file_rmap() page_remove_rmap() has too many branches on PageAnon() and is hard to follow. Move the file part into a separate function. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
d7365e7 | Johannes Weiner | 29 October 2014, 21:50:48 UTC | mm: memcontrol: fix missed end-writeback page accounting Commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") changed page migration to uncharge the old page right away. The page is locked, unmapped, truncated, and off the LRU, but it could race with writeback ending, which then doesn't unaccount the page properly: test_clear_page_writeback() migration wait_on_page_writeback() TestClearPageWriteback() mem_cgroup_migrate() clear PCG_USED mem_cgroup_update_page_stat() if (PageCgroupUsed(pc)) decrease memcg pages under writeback release pc->mem_cgroup->move_lock The per-page statistics interface is heavily optimized to avoid a function call and a lookup_page_cgroup() in the file unmap fast path, which means it doesn't verify whether a page is still charged before clearing PageWriteback() and it has to do it in the stat update later. Rework it so that it looks up the page's memcg once at the beginning of the transaction and then uses it throughout. The charge will be verified before clearing PageWriteback() and migration can't uncharge the page as long as that is still set. The RCU lock will protect the memcg past uncharge. As far as losing the optimization goes, the following test results are from a microbenchmark that maps, faults, and unmaps a 4GB sparse file three times in a nested fashion, so that there are two negative passes that don't account but still go through the new transaction overhead. There is no actual difference: old: 33.195102545 seconds time elapsed ( +- 0.01% ) new: 33.199231369 seconds time elapsed ( +- 0.03% ) The time spent in page_remove_rmap()'s callees still adds up to the same, but the time spent in the function itself seems reduced: # Children Self Command Shared Object Symbol old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:15 UTC |
3a3c02e | Johannes Weiner | 29 October 2014, 21:50:46 UTC | mm: page-writeback: inline account_page_dirtied() into single caller A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
ea5d05b | Jan Kara | 29 October 2014, 21:50:44 UTC | lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}() If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by a multiple of BITS_PER_LONG, they will try to shift a long value by BITS_PER_LONG bits which is undefined. Change the functions to avoid the undefined shift. Coverity id: 1192175 Coverity id: 1192174 Signed-off-by: Jan Kara <jack@suse.cz> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
5a6e759 | Pavel Machek | 29 October 2014, 21:50:42 UTC | drivers/rtc/rtc-bq32k.c: fix register value Fix register value in bq32000 trickle charging. Mike reported that I'm using wrong value in one trickle-charging case, and after checking docs, I must admit he's right. Signed-off-by: Pavel Machek <pavel@denx.de> Reported-by: Mike Bremford <mike@bfo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
35dca71 | Yasuaki Ishimatsu | 29 October 2014, 21:50:40 UTC | memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node() When hot adding the same memory after hot removal, the following messages are shown: WARNING: CPU: 20 PID: 6 at mm/page_alloc.c:4968 free_area_init_node+0x3fe/0x426() ... Call Trace: dump_stack+0x46/0x58 warn_slowpath_common+0x81/0xa0 warn_slowpath_null+0x1a/0x20 free_area_init_node+0x3fe/0x426 hotadd_new_pgdat+0x90/0x110 add_memory+0xd4/0x200 acpi_memory_device_add+0x1aa/0x289 acpi_bus_attach+0xfd/0x204 acpi_bus_attach+0x178/0x204 acpi_bus_scan+0x6a/0x90 acpi_device_hotplug+0xe8/0x418 acpi_hotplug_work_fn+0x1f/0x2b process_one_work+0x14e/0x3f0 worker_thread+0x11b/0x510 kthread+0xe1/0x100 ret_from_fork+0x7c/0xb0 The detaled explanation is as follows: When hot removing memory, pgdat is set to 0 in try_offline_node(). But if the pgdat is allocated by bootmem allocator, the clearing step is skipped. And when hot adding the same memory, the uninitialized pgdat is reused. But free_area_init_node() checks wether pgdat is set to zero. As a result, free_area_init_node() hits WARN_ON(). This patch clears pgdat which is allocated by bootmem allocator in try_offline_node(). Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
eaf3a65 | Marek Szyprowski | 29 October 2014, 21:50:38 UTC | drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock Fix unconditional initialization failure on non-exynos3250 SoCs. Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC") introduced rtc source clock support, but also added initialization failure on SoCs, which doesn't need such clock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
0baf2a4 | Martin Schwidefsky | 29 October 2014, 21:50:35 UTC | kernel/kmod: fix use-after-free of the sub_info structure Found this in the message log on a s390 system: BUG kmalloc-192 (Not tainted): Poison overwritten Disabling lock debugging due to kernel taint INFO: 0x00000000684761f4-0x00000000684761f7. First byte 0xff instead of 0x6b INFO: Allocated in call_usermodehelper_setup+0x70/0x128 age=71 cpu=2 pid=648 __slab_alloc.isra.47.constprop.56+0x5f6/0x658 kmem_cache_alloc_trace+0x106/0x408 call_usermodehelper_setup+0x70/0x128 call_usermodehelper+0x62/0x90 cgroup_release_agent+0x178/0x1c0 process_one_work+0x36e/0x680 worker_thread+0x2f0/0x4f8 kthread+0x10a/0x120 kernel_thread_starter+0x6/0xc kernel_thread_starter+0x0/0xc INFO: Freed in call_usermodehelper_exec+0x110/0x1b8 age=71 cpu=2 pid=648 __slab_free+0x94/0x560 kfree+0x364/0x3e0 call_usermodehelper_exec+0x110/0x1b8 cgroup_release_agent+0x178/0x1c0 process_one_work+0x36e/0x680 worker_thread+0x2f0/0x4f8 kthread+0x10a/0x120 kernel_thread_starter+0x6/0xc kernel_thread_starter+0x0/0xc There is a use-after-free bug on the subprocess_info structure allocated by the user mode helper. In case do_execve() returns with an error ____call_usermodehelper() stores the error code to sub_info->retval, but sub_info can already have been freed. Regarding UMH_NO_WAIT, the sub_info structure can be freed by __call_usermodehelper() before the worker thread returns from do_execve(), allowing memory corruption when do_execve() failed after exec_mmap() is called. Regarding UMH_WAIT_EXEC, the call to umh_complete() allows call_usermodehelper_exec() to continue which then frees sub_info. To fix this race the code needs to make sure that the call to call_usermodehelper_freeinfo() is always done after the last store to sub_info->retval. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
c8d523a | Stanimir Varbanov | 29 October 2014, 21:50:33 UTC | drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc Adds support for RTC device inside PM8941 PMIC. The RTC in this PMIC have two register spaces. Thus the rtc-pm8xxx is slightly reworked to reflect these differences. The register set for different PMIC chips are selected on DT compatible string base. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: simplify and fix locking in pm8xxx_rtc_set_time()] Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
6d50e60 | David Rientjes | 29 October 2014, 21:50:31 UTC | mm, thp: fix collapsing of hugepages on madvise If an anonymous mapping is not allowed to fault thp memory and then madvise(MADV_HUGEPAGE) is used after fault, khugepaged will never collapse this memory into thp memory. This occurs because the madvise(2) handler for thp, hugepage_madvise(), clears VM_NOHUGEPAGE on the stack and it isn't stored in vma->vm_flags until the final action of madvise_behavior(). This causes the khugepaged_enter_vma_merge() to be a no-op in hugepage_madvise() when the vma had previously had VM_NOHUGEPAGE set. Fix this by passing the correct vma flags to the khugepaged mm slot handler. There's no chance khugepaged can run on this vma until after madvise_behavior() returns since we hold mm->mmap_sem. It would be possible to clear VM_NOHUGEPAGE directly from vma->vm_flags in hugepage_advise(), but I didn't want to introduce special case behavior into madvise_behavior(). I think it's best to just let it always set vma->vm_flags itself. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Suleiman Souhlal <suleiman@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
47f29df | Marek Szyprowski | 29 October 2014, 21:50:29 UTC | drivers: of: add return value to of_reserved_mem_device_init() Driver calling of_reserved_mem_device_init() might be interested if the initialization has been successful or not, so add support for returning error code. This fixes a build warining caused by commit 7bfa5ab6fa1b ("drivers: dma-coherent: add initialization from device tree"), which has been merged without this change and without fixing function return value. Fixes: 7bfa5ab6fa1b1 ("drivers: dma-coherent: add initialization from device tree") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
5ddacbe | Yu Zhao | 29 October 2014, 21:50:26 UTC | mm: free compound page with correct order Compound page should be freed by put_page() or free_pages() with correct order. Not doing so will cause tail pages leaked. The compound order can be obtained by compound_order() or use HPAGE_PMD_ORDER in our case. Some people would argue the latter is faster but I prefer the former which is more general. This bug was observed not just on our servers (the worst case we saw is 11G leaked on a 48G machine) but also on our workstations running Ubuntu based distro. $ cat /proc/vmstat | grep thp_zero_page_alloc thp_zero_page_alloc 55 thp_zero_page_alloc_failed 0 This means there is (thp_zero_page_alloc - 1) * (2M - 4K) memory leaked. Fixes: 97ae17497e99 ("thp: implement refcounting for huge zero page") Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
f601de2 | Riku Voipio | 29 October 2014, 21:50:24 UTC | gcov: add ARM64 to GCOV_PROFILE_ALL Following up the arm testing of gcov, turns out gcov on ARM64 works fine as well. Only change needed is adding ARM64 to Kconfig depends. Tested with qemu and mach-virt Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
6424bab | Jerry Hoemann | 29 October 2014, 21:50:22 UTC | fsnotify: next_i is freed during fsnotify_unmount_inodes. During file system stress testing on 3.10 and 3.12 based kernels, the umount command occasionally hung in fsnotify_unmount_inodes in the section of code: spin_lock(&inode->i_lock); if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { spin_unlock(&inode->i_lock); continue; } As this section of code holds the global inode_sb_list_lock, eventually the system hangs trying to acquire the lock. Multiple crash dumps showed: The inode->i_state == 0x60 and i_count == 0 and i_sb_list would point back at itself. As this is not the value of list upon entry to the function, the kernel never exits the loop. To help narrow down problem, the call to list_del_init in inode_sb_list_del was changed to list_del. This poisons the pointers in the i_sb_list and causes a kernel to panic if it transverse a freed inode. Subsequent stress testing paniced in fsnotify_unmount_inodes at the bottom of the list_for_each_entry_safe loop showing next_i had become free. We believe the root cause of the problem is that next_i is being freed during the window of time that the list_for_each_entry_safe loop temporarily releases inode_sb_list_lock to call fsnotify and fsnotify_inode_delete. The code in fsnotify_unmount_inodes attempts to prevent the freeing of inode and next_i by calling __iget. However, the code doesn't do the __iget call on next_i if i_count == 0 or if i_state & (I_FREEING | I_WILL_FREE) The patch addresses this issue by advancing next_i in the above two cases until we either find a next_i which we can __iget or we reach the end of the list. This makes the handling of next_i more closely match the handling of the variable "inode." The time to reproduce the hang is highly variable (from hours to days.) We ran the stress test on a 3.10 kernel with the proposed patch for a week without failure. During list_for_each_entry_safe, next_i is becoming free causing the loop to never terminate. Advance next_i in those cases where __iget is not done. Signed-off-by: Jerry Hoemann <jerry.hoemann@hp.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ken Helias <kenhelias@firemail.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:14 UTC |
6ea41c0 | Joonsoo Kim | 29 October 2014, 21:50:20 UTC | mm/compaction.c: avoid premature range skip in isolate_migratepages_range Commit edc2ca612496 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") commonizes isolate_migratepages variants and make them use isolate_migratepages_block(). isolate_migratepages_block() could stop the execution when enough pages are isolated, but, there is no code in isolate_migratepages_range() to handle this case. In the result, even if isolate_migratepages_block() returns prematurely without checking all pages in the range, isolate_migratepages_block() is called repeately on the following pageblock and some pages in the previous range are skipped to check. Then, CMA is failed frequently due to this fact. To fix this problem, this patch let isolate_migratepages_range() know the situation that enough pages are isolated and stop the isolation in that case. Note that isolate_migratepages() has no such problem, because, it always stops the isolation after just one call of isolate_migratepages_block(). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:13 UTC |
401507d | Wang Nan | 29 October 2014, 21:50:18 UTC | cgroup/kmemleak: add kmemleak_free() for cgroup deallocations. Commit ff7ee93f4715 ("cgroup/kmemleak: Annotate alloc_page() for cgroup allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but corresponding kmemleak_free() is missing, which makes kmemleak be wrongly disabled after memory offlining. Log is pasted at the end of this commit message. This patch add kmemleak_free() into free_page_cgroup(). During page offlining, this patch removes corresponding entries in kmemleak rbtree. After that, the freed memory can be allocated again by other subsystems without killing kmemleak. bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak Offlined Pages 32768 kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing) CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x46/0x58 create_object+0x266/0x2c0 kmemleak_alloc+0x26/0x50 kmem_cache_alloc+0xd3/0x160 __sigqueue_alloc+0x49/0xd0 __send_signal+0xcb/0x410 send_signal+0x45/0x90 __group_send_sig_info+0x13/0x20 do_notify_parent+0x1bb/0x260 do_exit+0x767/0xa40 do_group_exit+0x44/0xa0 SyS_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff880016900000 (size 524288): kmemleak: comm "swapper/0", pid 0, jiffies 4294667296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: log_early+0x63/0x77 kmemleak_alloc+0x4b/0x50 init_section_page_cgroup+0x7f/0xf5 page_cgroup_init+0xc5/0xd0 start_kernel+0x333/0x408 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf5/0xfc Fixes: ff7ee93f4715 (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations) Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> [3.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 October 2014, 23:33:13 UTC |
d70127e | Nikolay Aleksandrov | 28 October 2014, 09:44:01 UTC | inet: frags: remove the WARN_ON from inet_evict_bucket The WARN_ON in inet_evict_bucket can be triggered by a valid case: inet_frag_kill and inet_evict_bucket can be running in parallel on the same queue which means that there has been at least one more ref added by a previous inet_frag_find call, but inet_frag_kill can delete the timer before inet_evict_bucket which will cause the WARN_ON() there to trigger since we'll have refcnt!=1. Now, this case is valid because the queue is being "killed" for some reason (removed from the chain list and its timer deleted) so it will get destroyed in the end by one of the inet_frag_put() calls which reaches 0 i.e. refcnt is still valid. CC: Florian Westphal <fw@strlen.de> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Patrick McLean <chutzpah@gentoo.org> Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue") Reported-by: Patrick McLean <chutzpah@gentoo.org> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 October 2014, 19:21:30 UTC |
65ba1f1 | Nikolay Aleksandrov | 28 October 2014, 09:30:34 UTC | inet: frags: fix a race between inet_evict_bucket and inet_frag_kill When the evictor is running it adds some chosen frags to a local list to be evicted once the chain lock has been released but at the same time the *frag_queue can be running for some of the same queues and it may call inet_frag_kill which will wait on the chain lock and will then delete the queue from the wrong list since it was added in the eviction one. The fix is simple - check if the queue has the evict flag set under the chain lock before deleting it, this is safe because the evict flag is set only under that lock and having the flag set also means that the queue has been detached from the chain list, so no need to delete it again. An important note to make is that we're safe w.r.t refcnt because inet_frag_kill and inet_evict_bucket will sync on the del_timer operation where only one of the two can succeed (or if the timer is executing - none of them), the cases are: 1. inet_frag_kill succeeds in del_timer - then the timer ref is removed, but inet_evict_bucket will not add this queue to its expire list but will restart eviction in that chain 2. inet_evict_bucket succeeds in del_timer - then the timer ref is kept until the evictor "expires" the queue, but inet_frag_kill will remove the initial ref and will set INET_FRAG_COMPLETE which will make the frag_expire fn just to remove its ref. In the end all of the queue users will do an inet_frag_put and the one that reaches 0 will free it. The refcount balance should be okay. CC: Florian Westphal <fw@strlen.de> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Patrick McLean <chutzpah@gentoo.org> Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Patrick McLean <chutzpah@gentoo.org> Tested-by: Patrick McLean <chutzpah@gentoo.org> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 October 2014, 19:21:30 UTC |
8f4eb70 | Tej Parkash | 28 October 2014, 05:18:15 UTC | cnic: Update the rcu_access_pointer() usages 1. Remove the rcu_read_lock/unlock around rcu_access_pointer 2. Replace the rcu_dereference with rcu_access_pointer Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 October 2014, 19:07:28 UTC |
d506aa6 | Linus Torvalds | 29 October 2014, 18:57:10 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block layer fixes from Jens Axboe: "A small collection of fixes for the current kernel. This contains: - Two error handling fixes from Jan Kara. One for null_blk on failure to add a device, and the other for the block/scsi_ioctl SCSI_IOCTL_SEND_COMMAND fixing up the error jump point. - A commit added in the merge window for the bio integrity bits unfortunately disabled merging for all requests if CONFIG_BLK_DEV_INTEGRITY wasn't set. Reverse the logic, so that integrity checking wont disallow merges when not enabled. - A fix from Ming Lei for merging and generating too many segments. This caused a BUG in virtio_blk. - Two error handling printk() fixups from Robert Elliott, improving the information given when we rate limit. - Error handling fixup on elevator_init() failure from Sudip Mukherjee. - A fix from Tony Battersby, fixing up a memory leak in the scatterlist handling with scsi-mq" * 'for-linus' of git://git.kernel.dk/linux-block: block: Fix merge logic when CONFIG_BLK_DEV_INTEGRITY is not defined lib/scatterlist: fix memory leak with scsi-mq block: fix wrong error return in elevator_init() scsi: Fix error handling in SCSI_IOCTL_SEND_COMMAND null_blk: Cleanup error recovery in null_add_dev() blk-merge: recaculate segment if it isn't less than max segments fs: clarify rate limit suppressed buffer I/O errors fs: merge I/O error prints into one line | 29 October 2014, 18:57:10 UTC |
7f474df | Linus Torvalds | 29 October 2014, 18:52:35 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - workarounds for a couple of misbehaving Elan Touchscreens, by Adel Gadllah - fix for TransducerSerialNumber field implementation, by Jason Gerecke - a couple of new HID usages (added by HUT), by Olivier Gay * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: input: Fix TransducerSerialNumber implementation HID: add keyboard input assist hid usages HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b | 29 October 2014, 18:52:35 UTC |
cd03cf0 | Hariprasad Shenai | 27 October 2014, 17:52:10 UTC | cxgb4vf: Replace repetitive pci device ID's with right ones Replaced repetive Device ID's which got added in commit b961f9a48844ecf3 ("cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro") Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 October 2014, 18:48:12 UTC |
8c78293 | Linus Torvalds | 29 October 2014, 18:47:42 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull Integrity subsystem fix from James Morris: "These changes fix a bug in xattr handling, where the evm and ima inode_setxattr() functions do not check for empty xattrs being passed from userspace (leading to user-triggerable null pointer dereferences)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: evm: check xattr value length and type in evm_inode_setxattr() ima: check xattr value length and type in the ima_inode_setxattr() | 29 October 2014, 18:47:42 UTC |
b2ed64a | Lubomir Rintel | 27 October 2014, 16:39:16 UTC | ipv6: notify userspace when we added or changed an ipv6 token NetworkManager might want to know that it changed when the router advertisement arrives. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Daniel Borkmann <dborkman@redhat.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 October 2014, 18:35:32 UTC |
d561090 | WANG Cong | 24 October 2014, 23:55:58 UTC | sch_pie: schedule the timer after all init succeed Cc: Vijay Subramanian <vijaynsu@cisco.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> | 29 October 2014, 18:28:01 UTC |
19be9e8 | Linus Torvalds | 29 October 2014, 18:11:44 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "There's some bug fixes or cleanups to facilitate fixes, a MAINTAINERS update, and a new syscall (bpf)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update powerpc/numa: use cached value of update->cpu in update_cpu_topology cxl: Fix PSL error due to duplicate segment table entries powerpc/mm: Use appropriate ESID mask in copro_calculate_slb() cxl: Refactor cxl_load_segment() and find_free_sste() cxl: Disable secondary hash in segment table Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors" powernv: Use _GLOBAL_TOC for opal wrappers powerpc: Wire up sys_bpf() syscall MAINTAINERS: nx-842 driver maintainer change powerpc/mm: Remove redundant #if case powerpc/mm: Fix build error with hugetlfs disabled | 29 October 2014, 18:11:44 UTC |
9ff0bb5 | Thomas Petazzoni | 20 October 2014, 18:42:18 UTC | ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn() Since CONFIG_HIGHMEM got enabled on ARMv5 Kirkwood, we have noticed a very significant drop in networking performance. The test were conducted on an OpenBlocks A7 board. Without this patch, the outgoing performance measured with iperf are: - highmem OFF, TSO OFF 544 Mbit/s - highmem OFF, TSO ON 942 Mbit/s - highmem ON, TSO OFF 306 Mbit/s - highmem ON, TSO ON 246 Mbit/s On this Kirkwood platform, the L2 cache is a Feroceon cache, and with this cache, all the range operations have to be done on virtual addresses and not physical addresses. Therefore, whenever CONFIG_HIGHMEM is enabled, the cache maintenance operations call kmap_atomic_pfn() and kunmap_atomic(). However, kmap_atomic_pfn() does not implement the same fast path for non-highmem pages as the one implemented in kmap_atomic(), and this is one of the reason for the performance drop. While this patch does not fully restore the performances, it clearly improves them a lot: without patch with patch - highmem ON, TSO OFF 306 Mbit/s 387 Mbit/s - highmem ON, TSO ON 246 Mbit/s 434 Mbit/s We're still far from the !CONFIG_HIGHMEM performances, but it does improve a bit the situation. Thanks a lot to Ezequiel Garcia and Gregory Clement for all the testing work around this topic. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 29 October 2014, 17:22:07 UTC |
6d0ec1d | Fabio Estevam | 29 October 2014, 11:42:08 UTC | ARM: 8183/1: l2c: Improve l2c310_of_parse() error message Russell King suggested [1]: "I'd ask for one change. Please make all these messages start with "L2C-310 OF" not "PL310 OF:". The device is described in ARM documentation as a L2C-310 not PL310. (Also note the : is dropped too - most of the other messages don't have the : either.) The: "PL310 OF: cache setting yield illegal associativity PL310 OF: -1073346556 calculated, only 8 and 16 legal" message could also be changed to something like: "L2C-310 OF cache associativity %d invalid, only 8 or 16 permittedn" [1] http://www.spinics.net/lists/arm-kernel/msg372776.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 29 October 2014, 17:20:55 UTC |
0057572 | Laura Abbott | 24 October 2014, 18:49:01 UTC | ARM: 8181/1: Drop extra return statement Commit 513510ddba9650fc7da456eefeb0ead7632324f6 (common: dma-mapping: introduce common remapping functions) managed to end up with an extra return statement from the original patch. Drop it. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 29 October 2014, 17:20:51 UTC |
9c19db5 | Greg Kroah-Hartman | 29 October 2014, 16:24:42 UTC | Merge tag 'usb-serial-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.18-rc3 These updates remove two allocations of unused buffers from kobil_sct and add some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org> | 29 October 2014, 16:24:42 UTC |
072c44b | Dan Carpenter | 29 October 2014, 15:47:07 UTC | drm/radeon: remove some buggy dead code The calculation of "num_shader_engines" has a precedence bug because the right shift happens before the mask, but this variable is never used so we can just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 29 October 2014, 16:24:15 UTC |
a2fa6f6 | Richard Zhu | 27 October 2014, 05:17:32 UTC | PCI: imx6: Wait for clocks to stabilize after ref_en For boards without a reset GPIO we skip the delay between enabling the pcie_ref_clk and touching the RC registers for configuration. This hangs the system if there isn't a proper delay to ensure the clocks are settled in the DW PCIe core. Also iMX6Q always needs an additional 10us delay to make sure the reset is propagated through the core, as we don't have an explicitly controlled reset input on this SoC. This fixes a problem with 3fce0e882f61 ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes"): the kernel doesn't boot on systems that don't pass the PCI GPIO reset in the DTB. This regression affects mx6 nitrogen boards. [bhelgaas: add regression info in changelog] Fixes: 3fce0e882f61 ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes") Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Richard Zhu <richard.zhu@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> | 29 October 2014, 16:11:54 UTC |
7914900 | Lv Zheng | 29 October 2014, 03:33:49 UTC | ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. It is reported that Samsung laptops that need to poll events are broken by the following commit: Commit 3afcf2ece453e1a8c2c6de19cdf06da3772a1b08 Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set The behaviors of the 2 vendor firmwares are conflict: 1. Acer: OSPM shouldn't issue QR_EC unless SCI_EVT is set, firmware automatically sets SCI_EVT as long as there is event queued up. 2. Samsung: OSPM should issue QR_EC whatever SCI_EVT is set, firmware returns 0 when there is no event queued up. This patch is a quick fix to distinguish the behaviors to make Acer behavior only effective for Acer EC firmware so that the breakages on Samsung EC firmware can be avoided. Fixes: 3afcf2ece453 (ACPI / EC: Add support to disallow QR_EC to be issued ...) Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161 Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ [ rjw : Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 29 October 2014, 15:52:35 UTC |
df9ff91 | Lv Zheng | 29 October 2014, 03:33:43 UTC | Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC" It is reported that the following commit breaks Samsung hardware: Commit: 558e4736f2e1b0e6323adf7a5e4df77ed6cfc1a4. Subject: ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC Which means the Samsung behavior conflicts with the Acer behavior. 1. Samsung may behave like: [ +event 1 ] SCI_EVT set [ +event 2 ] SCI_EVT set write QR_EC read event [ -event 1 ] SCI_EVT clear Without the above commit, Samsung can work: [ +event 1 ] SCI_EVT set [ +event 2 ] SCI_EVT set write QR_EC CAN prepare next QR_EC as SCI_EVT=1 read event [ -event 1 ] SCI_EVT clear write QR_EC read event [ -event 2 ] SCI_EVT clear With the above commit, Samsung cannot work: [ +event 1 ] SCI_EVT set [ +event 2 ] SCI_EVT set write QR_EC read event [ -event 1 ] SCI_EVT clear CANNOT prepare next QR_EC as SCI_EVT=0 2. Acer may behave like: [ +event 1 ] SCI_EVT set [ +event 2 ] write QR_EC read event [ -event 1 ] SCI_EVT clear [ +event 2 ] SCI_EVT set Without the above commit, Acer cannot work when there is only 1 event: [ +event 1 ] SCI_EVT set write QR_EC can prepared next QR_EC as SCI_EVT=1 read event [ -event 1 ] SCI_EVT clear CANNOT write QR_EC as SCI_EVT=0 With the above commit, Acer can work: [ +event 1 ] SCI_EVT set [ +event 2 ] write QR_EC read event [ -event 1 ] SCI_EVT set can prepare next QR_EC because SCI_EVT=0 CAN write QR_EC as SCI_EVT=1 Since Acer can also work with only the following commit applied: Commit: 3afcf2ece453e1a8c2c6de19cdf06da3772a1b08 Subject: ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set commit 558e4736f2e1b0e6323adf7a5e4df77ed6cfc1a4 can be reverted. Fixes: 558e4736f2e1 (ACPI / EC: Add support to disallow QR_EC to be issued ...) Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161 Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 3.17+ <stable@vger.kernel.org> # 3.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 29 October 2014, 15:48:33 UTC |
3b70bdb | Takashi Iwai | 29 October 2014, 15:13:05 UTC | ALSA: hda - Add workaround for CMI8888 snoop behavior CMI8888 shows the stuttering playback when the snooping is disabled on the audio buffer. Meanwhile, we've got reports that CORB/RIRB doesn't work in the snooped mode. So, as a compromise, disable the snoop only for CORB/RIRB and enable the snoop for the stream buffers. The resultant patch became a bit ugly, unfortunately, but we still can live with it. Reported-and-tested-by: Geoffrey McRae <geoff@spacevs.com> Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 October 2014, 15:16:29 UTC |
d75ef70 | Dan Carpenter | 29 October 2014, 10:01:36 UTC | Documentation/SubmittingPatches: Reported-by tags and permission The reported-by text says you have to ask for permission, but that should only be if the bug was reported in private. These days the standard is to always give reported-by credit or it's considered a bit rude. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 29 October 2014, 12:56:46 UTC |
4cdcc33 | Masami Hiramatsu | 27 October 2014, 20:31:24 UTC | perf probe: Trivial typo fix for --demangle Replace "Disable" with "Enable", since --demangle option enables symbol demangling, not disable it. perf probe has --demangle and --no-demangle options, but the command-line help (--help) shows only --demangle option. So it should explain about --demangle. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20141027203124.21219.68278.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:30:18 UTC |
288a4b9 | Jiri Olsa | 16 October 2014, 14:07:07 UTC | perf tools: Fix report -F dso_from for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F dso_from perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:29:05 UTC |
8b62fa5 | Jiri Olsa | 16 October 2014, 14:07:06 UTC | perf tools: Fix report -F dso_to for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F dso_to perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:28:48 UTC |
1b9e97a | Jiri Olsa | 16 October 2014, 14:07:05 UTC | perf tools: Fix report -F symbol_from for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F symbol_from perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-6-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:28:39 UTC |
38cdbd3 | Jiri Olsa | 16 October 2014, 14:07:04 UTC | perf tools: Fix report -F symbol_to for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F symbol_to perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:28:30 UTC |
428560e | Jiri Olsa | 16 October 2014, 14:07:03 UTC | perf tools: Fix report -F mispredict for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F mispredict perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:28:20 UTC |
0199d24 | Jiri Olsa | 16 October 2014, 14:07:02 UTC | perf tools: Fix report -F in_tx for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F in_tx perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:28:10 UTC |
49f4744 | Jiri Olsa | 16 October 2014, 14:07:01 UTC | perf tools: Fix report -F abort for data without branch info The branch field sorting code assumes hist_entry::branch_info is allocated, which is wrong and following perf session ends up with report segfault. $ perf record ls $ perf report -F abort perf: Segmentation fault Checking that hist_entry::branch_info is valid and display "N/A" string in snprint callback if it's not. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1413468427-31049-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:27:56 UTC |
493c303 | Wang Nan | 24 October 2014, 01:45:26 UTC | perf tools: Make CPUINFO_PROC an array to support different kernel versions After kernel 3.7 (commit b4b8f770eb10a1bccaf8aa0ec1956e2dd7ed1e0a), /proc/cpuinfo replaces 'Processor' to 'model name'. This patch makes CPUINFO_PROC to an array and provides two choices for ARM, makes it compatible for different kernel version. v1 -> v2: minor changes as suggested by Namhyung Kim: - Doesn't pass @h and @evlist to __write_cpudesc; - Coding style fix. v2 -> v3: - Rebase: git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git perf/core Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1414115126-7479-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:27:36 UTC |
380b514 | Namhyung Kim | 06 October 2014, 00:46:01 UTC | perf callchain: Use global caching provided by libunwind The libunwind provides two caching policy which are global and per-thread. As perf unwinds callchains in a single thread, it'd sufficient to use global caching. This speeds up my perf report from 14s to 7s on a ~260MB data file. Although the output sometimes contains a slight difference (~0.01% in terms of number of lines printed) on callchains which were not resolved. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jean Pihet <jean.pihet@linaro.org> Cc: Arun Sharma <asharma@fb.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1412556363-26229-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 29 October 2014, 12:25:22 UTC |
fd56e15 | Paolo Bonzini | 27 October 2014, 13:40:39 UTC | KVM: emulator: fix execution close to the segment limit Emulation of code that is 14 bytes to the segment limit or closer (e.g. RIP = 0xFFFFFFF2 after reset) is broken because we try to read as many as 15 bytes from the beginning of the instruction, and __linearize fails when the passed (address, size) pair reaches out of the segment. To fix this, let __linearize return the maximum accessible size (clamped to 2^32-1) for usage in __do_insn_fetch_bytes, and avoid the limit check by passing zero for the desired size. For expand-down segments, __linearize is performing a redundant check. (u32)(addr.ea + size - 1) <= lim can only happen if addr.ea is close to 4GB; in this case, addr.ea + size - 1 will also fail the check against the upper bound of the segment (which is provided by the D/B bit). After eliminating the redundant check, it is simple to compute the *max_size for expand-down segments too. Now that the limit check is done in __do_insn_fetch_bytes, we want to inject a general protection fault there if size < op_size (like __linearize would have done), instead of just aborting. This fixes booting Tiano Core from emulated flash with EPT disabled. Cc: stable@vger.kernel.org Fixes: 719d5a9b2487e0562f178f61e323c3dc18a8b200 Reported-by: Borislav Petkov <bp@suse.de> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 29 October 2014, 12:13:48 UTC |
3606189 | Paolo Bonzini | 27 October 2014, 13:40:49 UTC | KVM: emulator: fix error code for __linearize The error code for #GP and #SS is zero when the segment is used to access an operand or an instruction. It is only non-zero when a segment register is being loaded; for limit checks this means cases such as: * for #GP, when RIP is beyond the limit on a far call (before the first instruction is executed). We do not implement this check, but it would be in em_jmp_far/em_call_far. * for #SS, if the new stack overflows during an inter-privilege-level call to a non-conforming code segment. We do not implement stack switching at all. So use an error code of zero. Reviewed-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 29 October 2014, 11:40:28 UTC |
d0b9284 | Fabio Estevam | 29 October 2014, 11:06:31 UTC | ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int' Since commit f3354ab67476dc80 ("ARM: 8169/1: l2c: parse cache properties from ePAPR definitions") the following error is seen on imx6q: [ 0.000000] PL310 OF: cache setting yield illegal associativity [ 0.000000] PL310 OF: -2147097556 calculated, only 8 and 16 legal As imx6q does not pass the "cache-size" and "cache-sets" properties in DT, the function l2x0_cache_size_of_parse() returns early and keep the 'associativity' pointer uninitialized. To fix this problem, return error codes inside l2x0_cache_size_of_parse() and only use the 'associativity' pointer result if l2x0_cache_size_of_parse() succeeds. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 29 October 2014, 11:13:02 UTC |
1776b10 | Ingo Molnar | 29 October 2014, 09:18:17 UTC | perf/x86/intel: Revert incomplete and undocumented Broadwell client support These patches: 86a349a28b24 ("perf/x86/intel: Add Broadwell core support") c46e665f0377 ("perf/x86: Add INST_RETIRED.ALL workarounds") fdda3c4aacec ("perf/x86/intel: Use Broadwell cache event list for Haswell") introduced magic constants and unexplained changes: https://lkml.org/lkml/2014/10/28/1128 https://lkml.org/lkml/2014/10/27/325 https://lkml.org/lkml/2014/8/27/546 https://lkml.org/lkml/2014/10/28/546 Peter Zijlstra has attempted to help out, to clean up the mess: https://lkml.org/lkml/2014/10/28/543 But has not received helpful and constructive replies which makes me doubt wether it can all be finished in time until v3.18 is released. Despite various review feedback the author (Andi Kleen) has answered only few of the review questions and has generally been uncooperative, only giving replies when prompted repeatedly, and only giving minimal answers instead of constructively explaining and helping along the effort. That kind of behavior is not acceptable. There's also a boot crash on Intel E5-1630 v3 CPUs reported for another commit from Andi Kleen: e735b9db12d7 ("perf/x86/intel/uncore: Add Haswell-EP uncore support") https://lkml.org/lkml/2014/10/22/730 Which is not yet resolved. The uncore driver is independent in theory, but the crash makes me worry about how well all these patches were tested and makes me uneasy about the level of interminging that the Broadwell and Haswell code has received by the commits above. As a first step to resolve the mess revert the Broadwell client commits back to the v3.17 version, before we run out of time and problematic code hits a stable upstream kernel. ( If the Haswell-EP crash is not resolved via a simple fix then we'll have to revert the Haswell-EP uncore driver as well. ) The Broadwell client series has to be submitted in a clean fashion, with single, well documented changes per patch. If they are submitted in time and are accepted during review then they can possibly go into v3.19 but will need additional scrutiny due to the rocky history of this patch set. Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1409683455-29168-3-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 29 October 2014, 10:07:58 UTC |
5989a55 | Jason Gerecke | 23 September 2014, 18:09:28 UTC | HID: input: Fix TransducerSerialNumber implementation The commit which introduced TransducerSerialNumber (368c966) is missing two crucial implementation details. Firstly, the commit does not set the type/code/bit/max fields as expected later down the code which can cause the driver to crash when a tablet with this usage is connected. Secondly, the call to 'set_bit' causes MSC_PULSELED to be sent instead of the expected MSC_SERIAL. This commit addreses both issues. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 29 October 2014, 09:59:06 UTC |
d1cd121 | Dexuan Cui | 29 October 2014, 10:53:37 UTC | x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long << PAGE_SHIFT" will overflow for PFNs above 4GB. Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V, with 5GB memory assigned, can't load the netvsc driver successfully and hence the synthetic network device can't work (we can use the kernel parameter mem=3000M to work around the issue). Cast pte_pfn() to phys_addr_t before shifting. Fixes: "commit d76565344512: x86, mm: Create slow_virt_to_phys()" Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: gregkh@linuxfoundation.org Cc: linux-mm@kvack.org Cc: olaf@aepfle.de Cc: apw@canonical.com Cc: jasowang@redhat.com Cc: dave.hansen@intel.com Cc: riel@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 29 October 2014, 09:57:21 UTC |
b2a9601 | jens stein | 28 October 2014, 19:25:53 UTC | drm/i915: Ignore VBT backlight check on Macbook 2, 1 commit c675949ec58ca50d5a3ae3c757892f1560f6e896 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT prevents backlight setup on Macbook 2,1. Apply quirk to ignore the VBT check so backlight is set up properly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81438 Signed-off-by: Jens Stein Jørgensen <jens.s.stein@gmail.com> Cc: stable@vger.kernel.org (3.15+) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 29 October 2014, 08:34:33 UTC |
238b5ad | Ian Abbott | 20 October 2014, 14:10:40 UTC | staging: comedi: fix memory leak / bad pointer freeing for chanlist As a follow-up to commit 6cab7a37f5c04 ("staging: comedi: (regression) channel list must be set for COMEDI_CMD ioctl"), Hartley Sweeten pointed out another couple of bugs stemming from commit 6cab7a37f5c04 ("staging: comedi: comedi_fops: introduce __comedi_get_user_chanlist()"). Firstly, `do_cmdtest_ioctl()` never frees the kernel copy of the user chanlist allocated by `__comedi_get_user_chanlist()`, so that memory is leaked. Fix it by freeing the allocated kernel memory pointed to by `cmd.chanlist` before that pointer is overwritten with its original pointer to user memory before `cmd` is copied back to user-space. Secondly, if `__comedi_get_user_chanlist()` returns an error, `cmd->chanlist` is left unchanged and in fact will be a pointer to user memory. This causes `do_cmd_ioctl()` to `goto cleanup` and call `do_become_nonbusy()` which would attempt to free the memory pointed to by the user-space pointer. Fix it by setting `cmd->chanlist` to NULL at the start of `__comedi_get_user_chanlist()`. Fixes: c6cd0eefb27b ("staging: comedi: comedi_fops: introduce __comedi_get_user_chanlist()") Reported-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: <stable@vger.kernel.org> # 3.15.y 3.16.y 3.17.y: 6cab7a37f5c04 Cc: <stable@vger.kernel.org> # 3.15.y 3.16.y 3.17.y Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 29 October 2014, 08:18:31 UTC |
0ea6fa0 | Ian Abbott | 22 October 2014, 12:01:47 UTC | staging: comedi: Kconfig: fix config COMEDI_ADDI_APCI_3120 dependants A merge conflict between commits fbfd9c8a1782f33d7b67294b2a42587063e61c0c ("staging: comedi: addi_apci_3120: use dma_alloc_coherent()") and aff5b1f8eb71b64bb613dc64c50b6904e89f79b9 ("staging: comedi: remove comedi_fc module") left the COMEDI_ADDI_APCI_3120 config option depending on VIRT_TO_BUS when it no longer needs to do so. The dependency was removed by the first commit and accidentally reinstated by the second commit. Remove the dependency again. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 29 October 2014, 08:18:31 UTC |
c1a6eac | Ian Abbott | 28 October 2014, 17:15:47 UTC | staging: comedi: widen subdevice number argument in ioctl handlers For the `COMEDI_LOCK`, `COMEDI_UNLOCK`, `COMEDI_CANCEL`, and `COMEDI_POLL` ioctls the third argument is a comedi subdevice number. This is passed as an `unsigned long`, but when it is passed down to the ioctl command-specific handler functions `do_lock_ioctl()`, `do_unlock_ioctl()`, `do_cancel_ioctl()`, and `do_poll_ioctl()`, the value has been narrowed to an `unsigned int`. Pass through the argument as an `unsigned long` to avoid truncating the value on 64-bit architectures. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 29 October 2014, 08:18:31 UTC |
b77e8f4 | Jiang Liu | 27 October 2014, 05:21:33 UTC | ACPI, irq, x86: Return IRQ instead of GSI in mp_register_gsi() Function mp_register_gsi() returns blindly the GSI number for the ACPI SCI interrupt. That causes a regression when the GSI for ACPI SCI is shared with other devices. The regression was caused by commit 84245af7297ced9e8fe "x86, irq, ACPI: Change __acpi_register_gsi to return IRQ number instead of GSI" and exposed on a SuperMicro system, which shares one GSI between ACPI SCI and PCI device, with following failure: http://sourceforge.net/p/linux1394/mailman/linux1394-user/?viewmonth=201410 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) [ 2.699224] firewire_ohci 0000:06:00.0: failed to allocate interrupt 20 Return mp_map_gsi_to_irq(gsi, 0) instead of the GSI number. Reported-and-Tested-by: Daniel Robbins <drobbins@funtoo.org> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: <stable@vger.kernel.org> # 3.17 Link: http://lkml.kernel.org/r/1414387308-27148-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 29 October 2014, 07:52:30 UTC |
f182985 | Jiang Liu | 27 October 2014, 05:21:32 UTC | x86, intel-mid: Create IRQs for APB timers and RTC timers Intel MID platforms has no legacy interrupts, so no IRQ descriptors preallocated. We need to call mp_map_gsi_to_irq() to create IRQ descriptors for APB timers and RTC timers, otherwise it may cause invalid memory access as: [ 0.116839] BUG: unable to handle kernel NULL pointer dereference at 0000003a [ 0.123803] IP: [<c1071c0e>] setup_irq+0xf/0x4d Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: <stable@vger.kernel.org> # 3.17 Link: http://lkml.kernel.org/r/1414387308-27148-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 29 October 2014, 07:52:23 UTC |
d4e1a0a | Dave Jones | 28 October 2014, 17:57:53 UTC | x86: Don't enable F00F workaround on Intel Quark processors The Intel Quark processor is a part of family 5, but does not have the F00F bug present in Pentiums of the same family. Pentiums were models 0 through 8, Quark is model 9. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Link: http://lkml.kernel.org/r/20141028175753.GA12743@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 29 October 2014, 07:52:09 UTC |
6c880ad | James Morris | 29 October 2014, 04:03:54 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus | 29 October 2014, 04:03:54 UTC |
cb1a5ab | Martin K. Petersen | 29 October 2014, 02:27:43 UTC | block: Fix merge logic when CONFIG_BLK_DEV_INTEGRITY is not defined Commit 4eaf99beadce switched to returning bool and as a result reversed the logic of the integrity merge checks. However, the empty stubs used when the block integrity code is compiled out were still returning 0. Make these stubs return "true". Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Michael L. Semon <mlsemon35@gmail.com> Tested-by: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> | 29 October 2014, 02:27:43 UTC |
2d605a3 | Russell King | 28 October 2014, 15:27:07 UTC | ARM: enable bpf syscall Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 29 October 2014, 00:18:20 UTC |
2c0a33f | Nishanth Aravamudan | 18 October 2014, 00:50:40 UTC | powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update We received a report of warning in kernel/sched/core.c where the sched group was NULL on an LPAR after a topology update. This seems to occur because after the topology update has moved the CPUs, cpu_to_node is returning the old value still, which ends up breaking the consistency of the NUMA topology in the per-cpu maps. Ensure that we update the per-cpu fields when we re-map CPUs. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 28 October 2014, 22:41:22 UTC |
49f8d8c | Nishanth Aravamudan | 18 October 2014, 00:49:44 UTC | powerpc/numa: use cached value of update->cpu in update_cpu_topology There isn't any need to keep referring to update->cpu, as we've already checked cpu == update->cpu at this point. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 28 October 2014, 22:41:22 UTC |
f643ff5 | Al Viro | 28 October 2014, 22:37:40 UTC | isofs_cmp(): we'll never see a dentry for . or .. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 October 2014, 22:37:40 UTC |
d1b72cc | Miklos Szeredi | 27 October 2014, 14:42:01 UTC | overlayfs: fix lockdep misannotation In an overlay directory that shadows an empty lower directory, say /mnt/a/empty102, do: touch /mnt/a/empty102/x unlink /mnt/a/empty102/x rmdir /mnt/a/empty102 It's actually harmless, but needs another level of nesting between I_MUTEX_CHILD and I_MUTEX_NORMAL. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 October 2014, 22:32:47 UTC |
c209653 | Miklos Szeredi | 27 October 2014, 12:48:48 UTC | ovl: fix check for cursor ovl_cache_entry.name is now an array not a pointer, so it makes no sense test for it being NULL. Detected by coverity. From: Miklos Szeredi <mszeredi@suse.cz> Fixes: 68bf8611076a ("overlayfs: make ovl_cache_entry->name an array instead of +pointer") Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 October 2014, 22:31:54 UTC |
d45f00a | Al Viro | 28 October 2014, 22:27:28 UTC | overlayfs: barriers for opening upper-layer directory make sure that a) all stores done by opening struct file don't leak past storing the reference in od->upperfile b) the lockless side has read dependency barrier Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 October 2014, 22:27:28 UTC |
54ef6df | Paul E. McKenney | 28 October 2014, 04:11:27 UTC | rcu: Provide counterpart to rcu_dereference() for non-RCU situations Although rcu_dereference() and friends can be used in situations where object lifetimes are being managed by something other than RCU, the resulting sparse and lockdep-RCU noise can be annoying. This commit therefore supplies a lockless_dereference(), which provides the protection for dereferences without the RCU-related debugging noise. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 October 2014, 22:25:17 UTC |
5fecf3a | Daniel Thompson | 27 October 2014, 18:51:43 UTC | staging: android: logger: Fix log corruption regression Since commit cd678fce4280 ("switch logger to ->write_iter()"), any attempt to write to the log results in the log data being written over its own metadata, thus rendering the log unreadable. The problem was first detected when I ran an Android userspace on the v3.18-rc1 kernel. However the issue can also be observed with a non-Android userspace by using echo/cat to write to/from /dev/log_main . This patch resolves the problem by using a temporary to track the status of not-yet-committed writes to the log buffer. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 28 October 2014, 22:24:30 UTC |
068301f | David S. Miller | 28 October 2014, 21:26:24 UTC | Merge branch 'cdc-ether' Olivier Blin says: ==================== cdc-ether: handle promiscuous mode Since kernel 3.16, my Lenovo USB network adapters (RTL8153) using cdc-ether are not working anymore in a bridge. This is due to commit c472ab68ad67db23c9907a27649b7dc0899b61f9, which resets the packet filter when the device is bound. The default packet filter set by cdc-ether does not include promiscuous, while the adapter seemed to have promiscuous enabled by default. This patch series allows to support promiscuous mode for cdc-ether, by hooking into set_rx_mode. Incidentally, maybe this device should be handled by the r8152 driver, but this patch series is still nice for other adapters. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Oliver Neukum <oneukum@suse.de> | 28 October 2014, 21:26:24 UTC |
b77e26d | Olivier Blin | 24 October 2014, 17:43:02 UTC | cdc-ether: handle promiscuous mode with a set_rx_mode callback Promiscuous mode was not supported anymore with my Lenovo adapters (RTL8153) since commit c472ab68ad67db23c9907a27649b7dc0899b61f9 (cdc-ether: clean packet filter upon probe). It was not possible to use them in a bridge anymore. Signed-off-by: Olivier Blin <olivier.blin@softathome.com> Also-analyzed-by: Loïc Yhuel <loic.yhuel@softathome.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2014, 21:26:20 UTC |