| 9c67481 | Christoph Hellwig | 18 April 2016, 21:06:28 UTC | IB/iser: Fix max_sectors calculation iSER currently has a couple places that set max_sectors in either the host template or SCSI host, and all of them get it wrong. This patch instead uses a single assignment that (hopefully) gets it right: the max_sectors value must be derived from the number of segments in the FR or FMR structure, but actually be one lower than the page size multiplied by the number of sectors, as it has to handle the case of non-aligned I/O. Without this I get trivial to reproduce hangs when running xfstests (on XFS) over iSER to Linux targets. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com> | 05 May 2016, 16:41:24 UTC |
| 4c8bb95 | Florian Westphal | 24 April 2016, 20:18:59 UTC | RDMA/nes: don't leak skb if carrier down Alternatively one could free the skb, OTOH I don't think this test is useful so just remove it. Cc: <linux-rdma@vger.kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Doug Ledford <dledford@redhat.com> | 29 April 2016, 01:11:09 UTC |
| e6bd18f | Jason Gunthorpe | 11 April 2016, 01:13:13 UTC | IB/security: Restrict use of the write() interface The drivers/infiniband stack uses write() as a replacement for bi-directional ioctl(). This is not safe. There are ways to trigger write calls that result in the return structure that is normally written to user space being shunted off to user specified kernel memory instead. For the immediate repair, detect and deny suspicious accesses to the write API. For long term, update the user space libraries and the kernel API to something that doesn't present the same security vulnerabilities (likely a structured ioctl() interface). The impacted uAPI interfaces are generally only available if hardware from drivers/infiniband is installed in the system. Reported-by: Jann Horn <jann@thejh.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [ Expanded check to all known write() entry points ] Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:03:16 UTC |
| 7723d8c | Dean Luick | 22 April 2016, 18:17:03 UTC | IB/hfi1: Use kernel default llseek for ui device The ui device llseek had a mistake with SEEK_END and did not fully follow seek semantics. Correct all this by using a kernel supplied function for fixed size devices. Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:39 UTC |
| 9415844 | Mitko Haralanov | 20 April 2016, 13:05:36 UTC | IB/hfi1: Don't attempt to free resources if initialization failed Attempting to free resources which have not been allocated and initialized properly led to the following kernel backtrace: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] PGD 852a43067 PUD 85d4a6067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 2831 Comm: osu_bw Tainted: G IO 3.12.18-wfr+ #1 task: ffff88085b15b540 ti: ffff8808588fe000 task.ti: ffff8808588fe000 RIP: 0010:[<ffffffffa09658fe>] [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] RSP: 0018:ffff8808588ffde0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff880858a31800 RCX: 0000000000000000 RDX: ffff88085d971bc0 RSI: ffff880858a318f8 RDI: ffff880858a318c0 RBP: ffff8808588ffe20 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88087ffd6f40 R11: 0000000001100348 R12: ffff880852900000 R13: ffff880858a318c0 R14: 0000000000000000 R15: ffff88085d971be8 FS: 00007f4674e83740(0000) GS:ffff88087f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000085c377000 CR4: 00000000001407f0 Stack: ffffffffa0941a71 ffff880858a318f8 ffff88085d971bc0 ffff880858a31800 ffff880852900000 ffff880858a31800 00000000003ffff7 ffff88085d971bc0 ffff8808588ffe60 ffffffffa09663fc ffff8808588ffe60 ffff880858a31800 Call Trace: [<ffffffffa0941a71>] ? find_mmu_handler+0x51/0x70 [hfi1] [<ffffffffa09663fc>] hfi1_user_exp_rcv_free+0x6c/0x120 [hfi1] [<ffffffffa0932809>] hfi1_file_close+0x1a9/0x340 [hfi1] [<ffffffff8116c189>] __fput+0xe9/0x270 [<ffffffff8116c35e>] ____fput+0xe/0x10 [<ffffffff81065707>] task_work_run+0xa7/0xe0 [<ffffffff81002969>] do_notify_resume+0x59/0x80 [<ffffffff814ffc1a>] int_signal+0x12/0x17 This commit re-arranges the context initialization code in a way that would allow for context event flags to be used to determine whether the context has been successfully initialized. In turn, this can be used to skip the resource de-allocation if they were never allocated in the first place. Fixes: 3abb33ac6521 ("staging/hfi1: Add TID cache receive init and free funcs") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com. Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:39 UTC |
| b9b06cb | Mike Marciniszyn | 20 April 2016, 13:05:30 UTC | IB/hfi1: Fix missing lock/unlock in verbs drain callback The iowait_sdma_drained() callback lacked locking to protect the qp s_flags field. This causes the s_flags to be out of sync on multiple CPUs, potentially corrupting the s_flags. Fixes: a545f5308b6c ("staging/rdma/hfi: fix CQ completion order issue") Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:39 UTC |
| e6d2e01 | Jubin John | 12 April 2016, 17:47:00 UTC | IB/rdmavt: Fix send scheduling call_send is used to determine whether to send immediately or schedule a send for later. The current logic in rdmavt is inverted and has a negative impact on the latency of the hfi1 and qib drivers. Fix this regression by correctly calling send immediately when call_send is set. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jubin John <jubin.john@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:39 UTC |
| 849e3e9 | Mitko Haralanov | 12 April 2016, 17:46:16 UTC | IB/hfi1: Prevent unpinning of wrong pages The routine used by the SDMA cache to handle already cached nodes can extend an already existing node. In its error handling code, the routine will unpin pages when not all pages of the buffer extension were pinned. There was a bug in that part of the routine, which would mistakenly unpin pages from the original set rather than the newly pinned pages. This commit fixes that bug by offsetting the page array to the proper place pointing at the beginning of the newly pinned pages. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:38 UTC |
| de82bdf | Mitko Haralanov | 12 April 2016, 17:46:03 UTC | IB/hfi1: Fix deadlock caused by locking with wrong scope The locking around the interval RB tree is designed to prevent access to the tree while it's being modified. The locking in its current form is too overzealous, which is causing a deadlock in certain cases with the following backtrace: Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0 CPU: 0 PID: 5836 Comm: IMB-MPI1 Tainted: G O 3.12.18-wfr+ #1 0000000000000000 ffff88087f206c50 ffffffff814f1caa ffffffff817b53f0 ffff88087f206cc8 ffffffff814ecd56 0000000000000010 ffff88087f206cd8 ffff88087f206c78 0000000000000000 0000000000000000 0000000000001662 Call Trace: <NMI> [<ffffffff814f1caa>] dump_stack+0x45/0x56 [<ffffffff814ecd56>] panic+0xc2/0x1cb [<ffffffff810d4370>] ? restart_watchdog_hrtimer+0x50/0x50 [<ffffffff810d4432>] watchdog_overflow_callback+0xc2/0xd0 [<ffffffff81109b4e>] __perf_event_overflow+0x8e/0x2b0 [<ffffffff8110a714>] perf_event_overflow+0x14/0x20 [<ffffffff8101c906>] intel_pmu_handle_irq+0x1b6/0x390 [<ffffffff814f927b>] perf_event_nmi_handler+0x2b/0x50 [<ffffffff814f8ad8>] nmi_handle.isra.3+0x88/0x180 [<ffffffff814f8d39>] do_nmi+0x169/0x310 [<ffffffff814f8177>] end_repeat_nmi+0x1e/0x2e [<ffffffff81272600>] ? unmap_single+0x30/0x30 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 <<EOE>> <IRQ> [<ffffffffa056c4a8>] hfi1_mmu_rb_search+0x38/0x70 [hfi1] [<ffffffffa05919cb>] user_sdma_free_request+0xcb/0x120 [hfi1] [<ffffffffa0593393>] user_sdma_txreq_cb+0x263/0x350 [hfi1] [<ffffffffa057fad7>] ? sdma_txclean+0x27/0x1c0 [hfi1] [<ffffffffa0593130>] ? user_sdma_send_pkts+0x1710/0x1710 [hfi1] [<ffffffffa057fdd6>] sdma_make_progress+0x166/0x480 [hfi1] [<ffffffff810762c9>] ? ttwu_do_wakeup+0x19/0xd0 [<ffffffffa0581c7e>] sdma_engine_interrupt+0x8e/0x100 [hfi1] [<ffffffffa0546bdd>] sdma_interrupt+0x5d/0xa0 [hfi1] [<ffffffff81097e57>] handle_irq_event_percpu+0x47/0x1d0 [<ffffffff81098017>] handle_irq_event+0x37/0x60 [<ffffffff8109aa5f>] handle_edge_irq+0x6f/0x120 [<ffffffff810044af>] handle_irq+0xbf/0x150 [<ffffffff8104c9b7>] ? irq_enter+0x17/0x80 [<ffffffff8150168d>] do_IRQ+0x4d/0xc0 [<ffffffff814f7c6a>] common_interrupt+0x6a/0x6a <EOI> [<ffffffff81073524>] ? finish_task_switch+0x54/0xe0 [<ffffffff814f56c6>] __schedule+0x3b6/0x7e0 [<ffffffff810763a6>] __cond_resched+0x26/0x30 [<ffffffff814f5eda>] _cond_resched+0x3a/0x50 [<ffffffff814f4f82>] down_write+0x12/0x30 [<ffffffffa0591619>] hfi1_release_user_pages+0x69/0x90 [hfi1] [<ffffffffa059173a>] sdma_rb_remove+0x9a/0xc0 [hfi1] [<ffffffffa056c00d>] __mmu_rb_remove.isra.5+0x5d/0x70 [hfi1] [<ffffffffa056c536>] hfi1_mmu_rb_remove+0x56/0x70 [hfi1] [<ffffffffa059427b>] hfi1_user_sdma_process_request+0x74b/0x1160 [hfi1] [<ffffffffa055c763>] hfi1_aio_write+0xc3/0x100 [hfi1] [<ffffffff8116a14c>] do_sync_readv_writev+0x4c/0x80 [<ffffffff8116b58b>] do_readv_writev+0xbb/0x230 [<ffffffff811a9da1>] ? fsnotify+0x241/0x320 [<ffffffff81073524>] ? finish_task_switch+0x54/0xe0 [<ffffffff8116b795>] vfs_writev+0x35/0x60 [<ffffffff8116b8c9>] SyS_writev+0x49/0xc0 [<ffffffff810cd876>] ? __audit_syscall_exit+0x1f6/0x2a0 [<ffffffff814ff992>] system_call_fastpath+0x16/0x1b As evident from the backtrace above, the process was being put to sleep while holding the lock. Limiting the scope of the lock only to the RB tree operation fixes the above error allowing for proper locking and the process being put to sleep when needed. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:38 UTC |
| f19bd64 | Mitko Haralanov | 12 April 2016, 17:45:57 UTC | IB/hfi1: Prevent NULL pointer deferences in caching code There is a potential kernel crash when the MMU notifier calls the invalidation routines in the hfi1 pinned page caching code for sdma. The invalidation routine could call the remove callback for the node, which in turn ends up dereferencing the current task_struct to get a pointer to the mm_struct. However, the mm_struct pointer could be NULL resulting in the following backtrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: [<ffffffffa041f75a>] sdma_rb_remove+0xaa/0x100 [hfi1] 15 task: ffff88085e66e080 ti: ffff88085c244000 task.ti: ffff88085c244000 RIP: 0010:[<ffffffffa041f75a>] [<ffffffffa041f75a>] sdma_rb_remove+0xaa/0x100 [hfi1] RSP: 0000:ffff88085c245878 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88105b9bbd40 RCX: ffffea003931a830 RDX: 0000000000000004 RSI: ffff88105754a9c0 RDI: ffff88105754a9c0 RBP: ffff88085c245890 R08: ffff88105b9bbd70 R09: 00000000fffffffb R10: ffff88105b9bbd58 R11: 0000000000000013 R12: ffff88105754a9c0 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88105b9bbd40 FS: 0000000000000000(0000) GS:ffff88107ef40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000001a0b000 CR4: 00000000001407e0 Stack: ffff88105b9bbd40 ffff88080ec481a8 ffff88080ec481b8 ffff88085c2458c0 ffffffffa03fa00e ffff88080ec48190 ffff88080ed9cd00 0000000001024000 0000000000000000 ffff88085c245920 ffffffffa03fa0e7 0000000000000282 Call Trace: [<ffffffffa03fa00e>] __mmu_rb_remove.isra.5+0x5e/0x70 [hfi1] [<ffffffffa03fa0e7>] mmu_notifier_mem_invalidate+0xc7/0xf0 [hfi1] [<ffffffffa03fa143>] mmu_notifier_page+0x13/0x20 [hfi1] [<ffffffff81156dd0>] __mmu_notifier_invalidate_page+0x50/0x70 [<ffffffff81140bbb>] try_to_unmap_one+0x20b/0x470 [<ffffffff81141ee7>] try_to_unmap_anon+0xa7/0x120 [<ffffffff81141fad>] try_to_unmap+0x4d/0x60 [<ffffffff8111fd7b>] shrink_page_list+0x2eb/0x9d0 [<ffffffff81120ab3>] shrink_inactive_list+0x243/0x490 [<ffffffff81121491>] shrink_lruvec+0x4c1/0x640 [<ffffffff81121641>] shrink_zone+0x31/0x100 [<ffffffff81121b0f>] kswapd_shrink_zone.constprop.62+0xef/0x1c0 [<ffffffff811229e3>] kswapd+0x403/0x7e0 [<ffffffff811225e0>] ? shrink_all_memory+0xf0/0xf0 [<ffffffff81068ac0>] kthread+0xc0/0xd0 [<ffffffff81068a00>] ? insert_kthread_work+0x40/0x40 [<ffffffff814ff8ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81068a00>] ? insert_kthread_work+0x40/0x40 To correct this, the mm_struct passed to us by the MMU notifier is used (which is what should have been done to begin with). This avoids the broken derefences and ensures that the correct mm_struct is used. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 16:00:38 UTC |
| e7d2c25 | Sagi Grimberg | 03 April 2016, 12:03:12 UTC | MAINTAINERS: Update iser/isert maintainer contact info Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 15:32:50 UTC |
| 986ef95 | Sagi Grimberg | 31 March 2016, 16:03:25 UTC | IB/mlx5: Expose correct max_sge_rd limit mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Cc: linux-stable@vger.kernel.org Reported-by: Christoph Hellwig <hch@lst.de> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 28 April 2016, 14:49:17 UTC |
| 32cc92c | Hariprasad S | 05 April 2016, 04:53:48 UTC | RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c6a4fb0d8 ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Doug Ledford <dledford@redhat.com> | 26 April 2016, 16:47:09 UTC |
| 40edd7f | Steve Wise | 12 April 2016, 13:55:03 UTC | iw_cxgb4: handle draining an idle qp In c4iw_drain_sq/rq(), if the particular queue is already empty then don't block. Fixes: ce4af14d94aa ('iw_cxgb4: add queue drain functions') Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 26 April 2016, 16:46:54 UTC |
| ad20234 | Steve Wise | 12 April 2016, 13:55:01 UTC | iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb3 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: c1340e8aa628 ("iw_cxgb3: support for iWARP port mapping") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 26 April 2016, 16:46:54 UTC |
| 851d7b6 | Steve Wise | 12 April 2016, 13:54:54 UTC | iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb4 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: 170003c894d9 ("iw_cxgb4: remove port mapper related code") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 26 April 2016, 16:46:54 UTC |
| 42235f8 | Sagi Grimberg | 26 April 2016, 14:55:38 UTC | IB/core: Don't drain non-existent rq queue-pair The drain_rq function expects a normal receive qp to drain. A qp can only have either a normal rq or an srq. If there is an srq, there is no rq to drain. Until the API supports draining SRQs, simply skip draining the rq when the qp has an srq attached. Fixes: 765d67748bcf ("IB: new common API for draining queues") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com> | 26 April 2016, 16:40:50 UTC |
| f4e7de6 | Doug Ledford | 23 April 2016, 00:14:58 UTC | IB/core: Fix oops in ib_cache_gid_set_default_gid When we fail to find the default gid index, we can't continue processing in this routine or else we will pass a negative index to later routines resulting in invalid memory access attempts and a kernel oops. Fixes: 03db3a2d81e6 (IB/core: Add RoCE GID table management) Signed-off-by: Doug Ledford <dledford@redhat.com> | 23 April 2016, 00:26:44 UTC |
| 2fe7857 | Arnd Bergmann | 23 March 2016, 10:34:36 UTC | i40iw: avoid potential uninitialized variable use gcc finds that the i40iw_make_cm_node() function in the recently added i40iw driver uses an uninitilized variable as an index into an array if CONFIG_IPV6 is disabled and the driver uses IPv6 mode: drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node': drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized] ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr); As far as I can tell, this code path can not be used because the ipv4 variable is always set with CONFIG_IPV6 is disabled, but it's better to be sure and prevent the undefined behavior, as well as shut up that warning in a proper way. This adds an 'else' clause for the case we get the warning about, causing the function to return an error in a controlled way. To avoid adding extra mess with combined io()/#ifdef clauses, I'm also converting the existing #ifdef into a more readable if(IS_ENABLED()) check. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: f27b4746f378 ("i40iw: add connection management code") Acked-by: Mustafa Ismail <Mustafa.ismail@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 06 April 2016, 14:37:16 UTC |
| 9967c70 | Arnd Bergmann | 23 March 2016, 10:37:45 UTC | IB/mlx5: fix VFs callback function prototypes The previous patch that added a couple of callback functions put the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING, which causes the build to fail if that option is disabled: drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add': drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function) This moves the four declarations below the #ifdef section so they are always available. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: eff901d30e6c ("IB/mlx5: Implement callbacks for manipulating VFs") Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> | 06 April 2016, 14:37:07 UTC |
| 9735a22 | Linus Torvalds | 03 April 2016, 14:09:40 UTC | Linux 4.6-rc2 | 03 April 2016, 14:09:40 UTC |
| 4c3b73c | Linus Torvalds | 03 April 2016, 12:22:12 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc kernel side fixes: - fix event leak - fix AMD PMU driver bug - fix core event handling bug - fix build bug on certain randconfigs Plus misc tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix pmu::stop() nesting perf/core: Don't leak event in the syscall error path perf/core: Fix time tracking bug with multiplexing perf jit: genelf makes assumptions about endian perf hists: Fix determination of a callchain node's childlessness perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples perf tools: Fix build break on powerpc perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers perf tests: Fix tarpkg build test error output redirection | 03 April 2016, 12:22:12 UTC |
| 7b367f5 | Linus Torvalds | 03 April 2016, 12:06:53 UTC | Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core kernel fixes from Ingo Molnar: "This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness you noted during the original nohz pull request, plus there's also misc fixes: - fix liblockdep build bug - fix uapi header build bug - print more lockdep hash collision info to help debug recent reports of hash collisions - update MAINTAINERS email address" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Update my email address locking/lockdep: Print chain_key collision information uapi/linux/stddef.h: Provide __always_inline to userspace headers tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh locking/atomic, sched: Unexport fetch_or() timers/nohz: Convert tick dependency mask to atomic_t locking/atomic: Introduce atomic_fetch_or() | 03 April 2016, 12:06:53 UTC |
| 17084b7 | Linus Torvalds | 03 April 2016, 12:03:49 UTC | v4l2-mc: avoid warning about unused variable Commit 840f5b0572ea ("media: au0828 disable tuner to demod link in au0828_media_device_register()") removed all uses of the 'dtv_demod', but left the variable itself around. Remove it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 03 April 2016, 12:03:49 UTC |
| 30cebb6 | Linus Torvalds | 03 April 2016, 11:32:28 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "This lot contains: - Some fixups for the fallout of the topology consolidation which unearthed AMD/Intel inconsistencies - Documentation for the x86 topology management - Support for AMD advanced power management bits - Two simple cleanups removing duplicated code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add advanced power management bits x86/thread_info: Merge two !__ASSEMBLY__ sections x86/cpufreq: Remove duplicated TDP MSR macro definitions x86/Documentation: Start documenting x86 topology x86/cpu: Get rid of compute_unit_id perf/x86/amd: Cleanup Fam10h NB event constraints x86/topology: Fix AMD core count | 03 April 2016, 11:32:28 UTC |
| f7eeb8a | Linus Torvalds | 02 April 2016, 23:57:49 UTC | Merge tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc Pull remoteproc fix from Bjorn Andersson: "Fix incorrect error check in the ST remoteproc driver and advertise the newly created linux-remoteproc mailing list" * tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc: MAINTAINERS: Add mailing list for remote processor subsystems remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value | 02 April 2016, 23:57:49 UTC |
| d6c24df | Linus Torvalds | 02 April 2016, 23:48:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "This includes fixes from HCH for -rc1 configfs default_groups conversion changes that ended up breaking some iscsi-target default_groups, along with Sagi's ib_drain_qp() conversion for iser-target to use the common caller now available to RDMA kernel consumers in v4.6+ code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: add a new add_wwn_groups fabrics method target: initialize the nacl base CIT begfore init_nodeacl target: remove ->fabric_cleanup_nodeacl iser-target: Use ib_drain_qp | 02 April 2016, 23:48:37 UTC |
| cb10716 | Linus Torvalds | 02 April 2016, 23:35:05 UTC | Convert straggling drivers to new six-argument get_user_pages() Commit d4edcf0d5695 ("mm/gup: Switch all callers of get_user_pages() to not pass tsk/mm") switched get_user_pages() callers to the simpler model where they no longer pass in the thread and mm pointer. But since then we've merged changes to a few drivers that re-introduce use of the old interface. Let's fix them up. They continued to work fine (thanks to the truly disgusting macros introduced in commit cde70140fed8: "mm/gup: Overload get_user_pages() functions"), but cause unnecessary build noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 02 April 2016, 23:35:05 UTC |
| 264800b | Linus Torvalds | 02 April 2016, 21:46:56 UTC | Merge tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs Pull configfs fix from Christoph Hellwig: "A trivial fix to the recently introduced binary attribute helper macros" * tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs: configfs: fix CONFIGFS_BIN_ATTR_[RW]O definitions | 02 April 2016, 21:46:56 UTC |
| 05cf807 | Linus Torvalds | 02 April 2016, 01:03:33 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ... | 02 April 2016, 01:03:33 UTC |
| cf78031 | Linus Torvalds | 02 April 2016, 00:57:13 UTC | Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const | 02 April 2016, 00:57:13 UTC |
| 1826907 | Linus Torvalds | 02 April 2016, 00:52:10 UTC | Merge tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC | 02 April 2016, 00:52:10 UTC |
| 4e19fd9 | Linus Torvalds | 02 April 2016, 00:31:19 UTC | Merge branch 'akpm' (patches from Andrew) Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only | 02 April 2016, 00:31:19 UTC |
| 8fbd4ad | Rafael J. Wysocki | 01 April 2016, 23:17:36 UTC | Merge branch 'acpi-processor' * acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC | 01 April 2016, 23:17:36 UTC |
| 82d2a34 | Linus Torvalds | 01 April 2016, 23:08:34 UTC | Merge branch 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has a few fixes Dave Sterba had queued up. These are all pretty small, but since they were tested I decided against waiting for more" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: transaction_kthread() is not freezable btrfs: cleaner_kthread() doesn't need explicit freeze btrfs: do not write corrupted metadata blocks to disk btrfs: csum_tree_block: return proper errno value | 01 April 2016, 23:08:34 UTC |
| 22fed39 | Linus Torvalds | 01 April 2016, 22:17:32 UTC | Merge tag 'for-linus' of git://github.com/martinbrandenburg/linux Pull OrangeFS fixes from Martin Brandenburg: "Two bugfixes for OrangeFS. One is a reference counting bug and the other is a typo in client minimum version" * tag 'for-linus' of git://github.com/martinbrandenburg/linux: orangefs: minimum userspace version is 2.9.3 orangefs: don't put readdir slot twice | 01 April 2016, 22:17:32 UTC |
| 4fff505 | Linus Torvalds | 01 April 2016, 22:15:51 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - fix oops when patching in alternative sequences on big-endian CPUs - reconcile asm/perf_event.h after merge window fallout with KVM ARM - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: updates for 4.6 arm64: perf: Move PMU register related defines to asm/perf_event.h arm64: opcodes.h: Add arm big-endian config options before including arm header | 01 April 2016, 22:15:51 UTC |
| 2708d17 | Linus Torvalds | 01 April 2016, 22:13:23 UTC | Merge tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes: - a fix in ALSA timer core to avoid possible BUG() trigger - a fix in ALSA timer core 32bit compat layer - a few HD-audio quirks for ASUS and HP machines - AMD HD-audio HDMI controller quirks - fixes of USB-audio double-free at some error paths - a fix for memory leak in DICE driver at hotunplug" * tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Use mod_timer() for rearming the system timer ALSA: hda - fix front mic problem for a HP desktop ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps ALSA: dice: fix memory leak when unplugging ALSA: hda - Apply fix for white noise on Asus N550JV, too ALSA: hda - Fix white noise on Asus N750JV headphone ALSA: hda - Asus N750JV external subwoofer fixup ALSA: timer: fix gparams ioctl compatibility for different architectures | 01 April 2016, 22:13:23 UTC |
| 394532e | Christophe Ricard | 01 April 2016, 21:31:42 UTC | .mailmap: add Christophe Ricard Different computers had different settings in the mail client. Some contributions appear as Christophe Ricard, others as Christophe RICARD. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| f76be61 | Andi Kleen | 01 April 2016, 21:31:40 UTC | Make CONFIG_FHANDLE default y Newer Fedora and OpenSUSE didn't boot with my standard configuration. It took me some time to figure out why, in fact I had to write a script to try different config options systematically. The problem is that something (systemd) in dracut depends on CONFIG_FHANDLE, which adds open by file handle syscalls. While it is set in defconfigs it is very easy to miss when updating older configs because it is not default y. Make it default y and also depend on EXPERT, as dracut use is likely widespread. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| ec3b688 | Neil Zhang | 01 April 2016, 21:31:37 UTC | mm/page_isolation.c: fix the function comments Commit fea85cff11de ("mm/page_isolation.c: return last tested pfn rather than failure indicator") changed the meaning of the return value. Let's change the function comments as well. Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| af8e15c | Michal Hocko | 01 April 2016, 21:31:34 UTC | oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head Commit bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") has simplified the check for tasks already enqueued for the oom reaper by checking tsk->oom_reaper_list != NULL. This check is not sufficient because the tsk might be the head of the queue without any other tasks queued and then we would simply lockup looping on the same task. Fix the condition by checking for the head as well. Fixes: bb29902a7515 ("oom, oom_reaper: protect oom_reaper_list using simpler way") Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| bbe3de2 | Lucas Stach | 01 April 2016, 21:31:32 UTC | mm/page_isolation: fix tracepoint to mirror check function behavior Page isolation has not failed if the fin pfn extends beyond the end pfn and test_pages_isolated checks this correctly. Fix the tracepoint to report the same result as the actual check function. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| 858eaaa | Nadav Amit | 01 April 2016, 21:31:26 UTC | mm/rmap: batched invalidations should use existing api The recently introduced batched invalidations mechanism uses its own mechanism for shootdown. However, it does wrong accounting of interrupts (e.g., inc_irq_stat is called for local invalidations), trace-points (e.g., TLB_REMOTE_SHOOTDOWN for local invalidations) and may break some platforms as it bypasses the invalidation mechanisms of Xen and SGI UV. This patch reuses the existing TLB flushing mechnaisms instead. We use NULL as mm to indicate a global invalidation is required. Fixes 72b252aed506b8 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| 18c9824 | Nadav Amit | 01 April 2016, 21:31:23 UTC | x86/mm: TLB_REMOTE_SEND_IPI should count pages TLB_REMOTE_SEND_IPI was recently introduced, but it counts bytes instead of pages. In addition, it does not report correctly the case in which flush_tlb_page flushes a page. Fix it to be consistent with other TLB counters. Fixes: 5b74283ab251b9d ("x86, mm: trace when an IPI is about to be sent") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| 6f25a14 | Xishi Qiu | 01 April 2016, 21:31:20 UTC | mm: fix invalid node in alloc_migrate_target() It is incorrect to use next_node to find a target node, it will return MAX_NUMNODES or invalid node. This will lead to crash in buddy system allocation. Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: "Laura Abbott" <lauraa@codeaurora.org> Cc: Hui Zhu <zhuhui@xiaomi.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| 969e8d7 | Chen Gang | 01 April 2016, 21:31:17 UTC | include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() The return value of pmd_trans_huge_lock() is a pointer, not a boolean value, so use NULL instead of false as the return value. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| 0b355ea | Alexander Potapenko | 01 April 2016, 21:31:15 UTC | mm, kasan: fix compilation for CONFIG_SLAB Add the missing argument to set_track(). Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Konstantin Serebryany <kcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| b39c3cf | Joe Perches | 01 April 2016, 21:31:12 UTC | MAINTAINERS: orangefs mailing list is subscribers-only So update MAINTAINERS to say so. Signed-off-by: Joe Perches <joe@perches.com> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 April 2016, 22:03:37 UTC |
| db5dd0d | Marcin Wojtas | 01 April 2016, 13:21:18 UTC | net: mvneta: fix changing MTU when using per-cpu processing After enabling per-cpu processing it appeared that under heavy load changing MTU can result in blocking all port's interrupts and transmitting data is not possible after the change. This commit fixes above issue by disabling percpu interrupts for the time, when TXQs and RXQs are reconfigured. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 19:16:37 UTC |
| ce2a04c | David S. Miller | 01 April 2016, 18:38:59 UTC | Merge branch 'stmmac-fixes' Giuseppe Cavallaro says: ==================== stmmac MDIO and normal descr fixes This patch series is to fix the problems below and recently debugged in this mailing list: o to fix a problem for the HW where the normal descriptor o to fix the mdio registration according to the different platform configurations I am resending all the patches again: built on top of net.git repo. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:38:59 UTC |
| a7657f1 | Giuseppe CAVALLARO | 01 April 2016, 07:07:16 UTC | stmmac: fix MDIO settings Initially the phy_bus_name was added to manipulate the driver name but it was recently just used to manage the fixed-link and then to take some decision at run-time. So the patch uses the is_pseudo_fixed_link and removes the phy_bus_name variable not necessary anymore. The driver can manage the mdio registration by using phy-handle, dwmac-mdio and own parameter e.g. snps,phy-addr. This patch takes care about all these possible configurations and fixes the mdio registration in case of there is a real transceiver or a switch (that needs to be managed by using fixed-link). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:38:59 UTC |
| d7e944c | Giuseppe CAVALLARO | 01 April 2016, 07:07:15 UTC | Revert "stmmac: Fix 'eth0: No PHY found' regression" This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Andreas Färber <afaerber@suse.de> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:38:58 UTC |
| a00e3ab | Giuseppe CAVALLARO | 01 April 2016, 07:07:14 UTC | stmmac: fix TX normal DESC This patch fixs a regression raised when test on chips that use the normal descriptor layout. In fact, no len bits were set for the TDES1 and no OWN bit inside the TDES0. Signed-off-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Tested-by: Andreas Färber <afaerber@suse.de> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:38:58 UTC |
| c66e98c | Jisheng Zhang | 01 April 2016, 09:12:49 UTC | net: mvneta: use cache_line_size() to get cacheline size L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:36:47 UTC |
| 4a0a12d | Jisheng Zhang | 01 April 2016, 09:11:05 UTC | net: mvpp2: use cache_line_size() to get cacheline size L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:36:47 UTC |
| d82b0c2 | Jisheng Zhang | 31 March 2016, 09:01:23 UTC | net: mvpp2: fix maybe-uninitialized warning This is to fix the following maybe-uninitialized warning: drivers/net/ethernet/marvell/mvpp2.c:6007:18: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:35:47 UTC |
| 5a5abb1 | Daniel Borkmann | 31 March 2016, 00:13:18 UTC | tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter Sasha Levin reported a suspicious rcu_dereference_protected() warning found while fuzzing with trinity that is similar to this one: [ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage! [ 52.765688] other info that might help us debug this: [ 52.765695] rcu_scheduler_active = 1, debug_locks = 1 [ 52.765701] 1 lock held by a.out/1525: [ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20 [ 52.765721] stack backtrace: [ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264 [...] [ 52.765768] Call Trace: [ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8 [ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110 [ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90 [ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun] [ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun] [ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210 [ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun] [ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690 [ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60 [ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90 [ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140 [ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25 Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH, DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices. Since the fix in f91ff5b9ff52 ("net: sk_{detach|attach}_filter() rcu fixes") sk_attach_filter()/sk_detach_filter() now dereferences the filter with rcu_dereference_protected(), checking whether socket lock is held in control path. Since its introduction in 994051625981 ("tun: socket filter support"), tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the sock_owned_by_user(sk) doesn't apply in this specific case and therefore triggers the false positive. Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair that is used by tap filters and pass in lockdep_rtnl_is_held() for the rcu_dereference_protected() checks instead. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 01 April 2016, 18:33:46 UTC |
| 6ddf37d | Linus Torvalds | 01 April 2016, 12:21:18 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too crazy in here: a bunch of AMD fixes/quirks, two msm fixes, some rockchip fixes, and a udl warning fix, along with one locking fix for displayport that seems to fix some dodgy monitors" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/udl: Use unlocked gem unreferencing drm/dp: move hw_mutex up the call stack drm/amdgpu: Don't move pinned BOs drm/radeon: Don't move pinned BOs drm/radeon: add a dpm quirk for all R7 370 parts drm/radeon: add another R7 370 quirk drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() drm/rockchip: vop: Fix vop crtc cleanup drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path drm/rockchip: vop: Disable planes when disabling CRTC drm/rockchip: vop: Don't reject empty modesets drm/rockchip: cancel pending vblanks on close drm/rockchip: vop: fix crtc size in plane check drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5 drm/amd: Beef up ACP Kconfig menu text drm/msm: fix typo in the !COMMON_CLK case drm/msm: fix bug after preclose removal | 01 April 2016, 12:21:18 UTC |
| 52bef0c | Linus Torvalds | 01 April 2016, 12:18:27 UTC | Merge tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fixup preempt underflow with huge pages from Sebastian Siewior - Fix altivec SPR not being saved from Oliver O'Halloran - Correct used_vsr comment from Simon Guo * tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Correct used_vsr comment powerpc/process: Fix altivec SPR not being saved powerpc/mm: Fixup preempt underflow with huge pages | 01 April 2016, 12:18:27 UTC |
| dc8a64e | Linus Torvalds | 01 April 2016, 12:15:54 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A proper fix for the locking issue in the dasd driver - Wire up the new preadv2 nad pwritev2 system calls - Add the mark_rodata_ro function and set DEBUG_RODATA=y - A few more bug fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up preadv2/pwritev2 syscalls s390/pci: PCI function group 0 is valid for clp_query_pci_fn s390/crypto: provide correct file mode at device register. s390/mm: handle PTE-mapped tail pages in fast gup s390: add DEBUG_RODATA support s390: disable postinit-readonly for now s390/dasd: reorder lcu and device lock s390/cpum_sf: Fix cpu hotplug notifier transitions s390/cpum_cf: Fix missing cpu hotplug notifier transition | 01 April 2016, 12:15:54 UTC |
| 4a07083 | Takashi Iwai | 01 April 2016, 10:28:16 UTC | ALSA: timer: Use mod_timer() for rearming the system timer ALSA system timer backend stops the timer via del_timer() without sync and leaves del_timer_sync() at the close instead. This is because of the restriction by the design of ALSA timer: namely, the stop callback may be called from the timer handler, and calling the sync shall lead to a hangup. However, this also triggers a kernel BUG() when the timer is rearmed immediately after stopping without sync: kernel BUG at kernel/time/timer.c:966! Call Trace: <IRQ> [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0 [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0 [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290 [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120 [<ffffffff81296b72>] call_timer_fn+0x162/0x520 [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520 [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0 .... It's the place where add_timer() checks the pending timer. It's clear that this may happen after the immediate restart without sync in our cases. So, the workaround here is just to use mod_timer() instead of add_timer(). This looks like a band-aid fix, but it's a right move, as snd_timer_interrupt() takes care of the continuous rearm of timer. Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 April 2016, 10:28:16 UTC |
| 3358999 | Heiko Carstens | 21 March 2016, 12:48:43 UTC | s390: wire up preadv2/pwritev2 syscalls Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 01 April 2016, 06:42:38 UTC |
| aa62488 | Pierre Morel | 16 March 2016, 12:56:35 UTC | s390/pci: PCI function group 0 is valid for clp_query_pci_fn The PCI function group 0 is a valid function group, it is wrong to reject it. Let's accept PCI function group 0. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 01 April 2016, 06:42:35 UTC |
| 353def9 | Masami Hiramatsu | 31 March 2016, 13:33:23 UTC | MAINTAINERS: Update my email address Since I moved to Linaro, this old address doesn't work anymore. I'll use my kernel.org account for upstreaming. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@redhat.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1459431203-7438-1-git-send-email-mhiramat@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 01 April 2016, 06:35:51 UTC |
| e549d19 | Hui Wang | 01 April 2016, 03:00:15 UTC | ALSA: hda - fix front mic problem for a HP desktop The front mic jack (pink color) can't detect any plug or unplug. After applying this fix, both detecting function and recording function work well. BugLink: https://bugs.launchpad.net/bugs/1564712 Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 April 2016, 05:36:39 UTC |
| 72b9ff0 | Daniel Vetter | 30 March 2016, 09:40:43 UTC | drm/udl: Use unlocked gem unreferencing For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 April 2016, 03:22:33 UTC |
| 7779c5e | Rob Clark | 25 February 2016, 21:15:05 UTC | drm/dp: move hw_mutex up the call stack 1) don't let other threads trying to bang on aux channel interrupt the defer timeout/logic 2) don't let other threads interrupt the i2c over aux logic Technically, according to people who actually have the DP spec, this should not be required. In practice, it makes some troublesome Dell monitor (and perhaps others) work, so probably a case of "It's compliant if it works with windows" on the hw vendor's part.. v2: rebased to come before DPCD/AUX logging patch for easier backport to stable branches. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157 Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 April 2016, 03:17:36 UTC |
| 5456248 | Dave Airlie | 01 April 2016, 03:14:24 UTC | Merge branch 'drm-rockchip-next-fixes-2016-03-28' of https://github.com/markyzq/kernel-drm-rockchip into drm-fixes bunch of rockchip fixes. * 'drm-rockchip-next-fixes-2016-03-28' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() drm/rockchip: vop: Fix vop crtc cleanup drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path drm/rockchip: vop: Disable planes when disabling CRTC drm/rockchip: vop: Don't reject empty modesets drm/rockchip: cancel pending vblanks on close drm/rockchip: vop: fix crtc size in plane check | 01 April 2016, 03:14:24 UTC |
| 90516d8 | Dave Airlie | 01 April 2016, 03:14:10 UTC | Merge branch 'msm-fixes-4.6-rc1' of git://people.freedesktop.org/~robclark/linux into drm-fixes two minor msm fixes. * 'msm-fixes-4.6-rc1' of git://people.freedesktop.org/~robclark/linux: drm/msm: fix typo in the !COMMON_CLK case drm/msm: fix bug after preclose removal | 01 April 2016, 03:14:10 UTC |
| 2f4fcb3 | Dave Airlie | 01 April 2016, 03:13:34 UTC | Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux into drm-fixes Just a few fixes for 4.6 this week: - Add some SI DPM quirks - Improve the ACP Kconfig text - Additional BO pinning checks * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Don't move pinned BOs drm/radeon: Don't move pinned BOs drm/radeon: add a dpm quirk for all R7 370 parts drm/radeon: add another R7 370 quirk drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5 drm/amd: Beef up ACP Kconfig menu text | 01 April 2016, 03:13:34 UTC |
| 79f4223 | Daniele Palmas | 31 March 2016, 13:16:47 UTC | net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card Telit LE910 V2 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 21:15:35 UTC |
| c57c7a9 | Nicolas Dichtel | 31 March 2016, 16:10:31 UTC | rtnl: fix msg size calculation in if_nlmsg_size() Size of the attribute IFLA_PHYS_PORT_NAME was missing. Fixes: db24a9044ee1 ("net: add support for phys_port_name") CC: David Ahern <dsahern@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 20:49:54 UTC |
| 32867fc | Fabio Estevam | 31 March 2016, 15:05:17 UTC | fec: Do not access unexisting register in Coldfire Commit 55cd48c821de ("net: fec: stop the "rcv is not +last, " error messages") introduces a write to a register that does not exist in Coldfire. Move the FEC_FTRL register access inside the FEC_QUIRK_HAS_RACC 'if' block, so that we guarantee it will not be used on Coldfire CPUs. Reported-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 20:04:05 UTC |
| 9bd9ddb | Jisheng Zhang | 30 March 2016, 11:55:21 UTC | net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES The mvneta is also used in some Marvell berlin family SoCs which may have 64bytes cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE usage with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 19:15:01 UTC |
| b7854ef | Jisheng Zhang | 30 March 2016, 11:53:41 UTC | net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES The mvpp2 ip maybe used in SoCs which may have have 64bytes cacheline size. Replace the MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 19:15:01 UTC |
| 13a7ebb | Patrick Uiterwijk | 30 March 2016, 01:39:41 UTC | net: dsa: mv88e6xxx: Clear the PDOWN bit on setup Some of the vendor-specific bootloaders set up this part of the initialization for us, so this was never added. However, since upstream bootloaders don't initialize the chip specifically, they leave the fiber MII's PDOWN flag set, which means that the CPU port doesn't connect. This patch checks whether this flag has been clear prior by something else, and if not make us clear it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 19:12:57 UTC |
| 75baacf | Patrick Uiterwijk | 30 March 2016, 01:39:40 UTC | net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} Add versions of the phy_page_read and _write functions to be used in a context where the SMI mutex is held. Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 19:12:57 UTC |
| 836b34a | Vladis Dronov | 31 March 2016, 16:05:43 UTC | ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call create_fixed_stream_quirk(), snd_usb_parse_audio_interface() and create_uaxx_quirk() functions allocate the audioformat object by themselves and free it upon error before returning. However, once the object is linked to a stream, it's freed again in snd_usb_audio_pcm_free(), thus it'll be double-freed, eventually resulting in a memory corruption. This patch fixes these failures in the error paths by unlinking the audioformat object before freeing it. Based on a patch by Takashi Iwai <tiwai@suse.de> [Note for stable backports: this patch requires the commit 902eb7fd1e4a ('ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk()')] Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283358 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Cc: <stable@vger.kernel.org> # see the note above Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 31 March 2016, 16:07:31 UTC |
| 878dfd3 | Martin Brandenburg | 30 March 2016, 20:18:43 UTC | orangefs: minimum userspace version is 2.9.3 Version 2.9.4 isn't even released yet. Signed-off-by: Martin Brandenburg <martin@omnibond.com> | 31 March 2016, 16:06:00 UTC |
| 641bb32 | Martin Brandenburg | 28 March 2016, 21:18:27 UTC | orangefs: don't put readdir slot twice This was quite an oversight. After a readdir, the module could not be unloaded, the number of slots is wrong, and memory near the slot bitmap is possibly corrupt. Oops. Signed-off-by: Martin Brandenburg <martin@omnibond.com> | 31 March 2016, 16:06:00 UTC |
| 4833a00 | David S. Miller | 31 March 2016, 15:40:16 UTC | Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-03-29 This series contains fixes to ixgbe and ixgbevf. Tushar fixes an issue which was introduced with an earlier commit, where hardware register RAR0 default MAC address does not get set properly. Alex fixes two issues, first being the VXLAN port number should be stored in network order instead of in host order. The second fix corrects the ATR code to handle IPv6 extension headers. The issue was ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through, but that is not the case, which resulted in bad filters being setup. Mark fixes a use of usleep_range() to udelay() in the case where a lock is being held. Stefan fixes the offline self tests where ndo_stop() should be used instead of ndo_close(), which causes IFF_UP to be cleared and interface routes get removed. Emil fixes the error case where we need to return an error when a MAC address change is rejected by the PF. This helps prevent the user from modifying the MAC address when the operation is not permitted. Sridhar provides three fixes for ixgbe, all dealing with traffic class offload handling. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 31 March 2016, 15:40:16 UTC |
| 39e2e17 | Alfredo Alvarez Fernandez | 30 March 2016, 17:03:36 UTC | locking/lockdep: Print chain_key collision information A sequence of pairs [class_idx -> corresponding chain_key iteration] is printed for both the current held_lock chain and the cached chain. That exposes the two different class_idx sequences that led to that particular hash value. This helps with debugging hash chain collision reports. Signed-off-by: Alfredo Alvarez Fernandez <alfredoalvarezfernandez@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-fsdevel@vger.kernel.org Cc: sedat.dilek@gmail.com Cc: tytso@mit.edu Link: http://lkml.kernel.org/r/1459357416-19190-1-git-send-email-alfredoalvarezernandez@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 31 March 2016, 13:03:58 UTC |
| 8eb2221 | Maruthi Srinivas Bayyavarapu | 31 March 2016, 12:40:03 UTC | ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps This commit fixes garbled audio on Polaris-10/11 variants Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 31 March 2016, 12:59:20 UTC |
| c05c2ec | Linus Torvalds | 31 March 2016, 12:55:14 UTC | Merge branch 'parisc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Fix seccomp filter support and SIGSYS signals on compat kernel. Both patches are tagged for v4.5 stable kernel" * 'parisc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix and enable seccomp filter support parisc: Fix SIGSYS signals in compat case | 31 March 2016, 12:55:14 UTC |
| e9dcfaf | Linus Torvalds | 31 March 2016, 12:19:39 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fix from Al Viro. Automount handling was broken by commit e3c13928086f ("namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()") moving the test for negative dentry too early. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the braino in "namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()" | 31 March 2016, 12:19:39 UTC |
| ca45720 | Linus Torvalds | 31 March 2016, 12:13:56 UTC | Merge tag 'gpio-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here are two GPIO fixes for the v4.6 series, both in drivers: - Prevent NULL dereference in the Xgene driver - Fix an uninitialized spinlock in the menz127 driver" * tag 'gpio-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: xgene: Prevent NULL pointer dereference gpio: menz127: Drop lock field from struct men_z127_gpio | 31 March 2016, 12:13:56 UTC |
| c5bce40 | Linus Torvalds | 31 March 2016, 11:56:50 UTC | Merge branch 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm mcsafe_memcpy use from Dan Williams: "Now that mcsafe_memcpy() has landed, and the return value was been clarified in commit cbf8b5a2b649 ("x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe()"), let's hook up its primary usage in the pmem driver. The compilation problems from the initial posting have been fixed, this has appeared in a -next release with no reported issues, and it picked up an ack from Ingo. There is no pressing need to merge this in 4.6- rc2. However, if we wait until 4.7 the new memcpy_mcsafe() capability will ship without a user in 4.6-final" * 'libnvdimm-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: x86, pmem: use memcpy_mcsafe() for memcpy_from_pmem() | 31 March 2016, 11:56:50 UTC |
| 910cd32 | Helge Deller | 30 March 2016, 12:14:31 UTC | parisc: Fix and enable seccomp filter support The seccomp filter support requires careful handling of task registers. This includes reloading of the return value (%r28) and proper syscall exit if secure_computing() returned -1. Additionally we need to sign-extend the syscall number from signed 32bit to signed 64bit in do_syscall_trace_enter() since the ptrace interface only allows storing 32bit values in compat mode. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.5 | 31 March 2016, 10:28:38 UTC |
| 4f4acc9 | Helge Deller | 30 March 2016, 12:11:50 UTC | parisc: Fix SIGSYS signals in compat case Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v4.5 | 31 March 2016, 10:28:37 UTC |
| 85dc600 | Peter Zijlstra | 21 March 2016, 10:47:52 UTC | perf/x86/amd/ibs: Fix pmu::stop() nesting Patch 5a50f5291701 ("perf/x86/ibs: Fix race with IBS_STARTING state") closed a big hole while opening another, smaller hole. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 5a50f5291701 ("perf/x86/ibs: Fix race with IBS_STARTING state") Signed-off-by: Ingo Molnar <mingo@kernel.org> | 31 March 2016, 07:54:08 UTC |
| 201c2f8 | Alexander Shishkin | 21 March 2016, 08:02:42 UTC | perf/core: Don't leak event in the syscall error path In the error path, event_file not being NULL is used to determine whether the event itself still needs to be free'd, so fix it up to avoid leaking. Reported-by: Leon Yu <chianglungyu@gmail.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 130056275ade ("perf: Do not double free") Link: http://lkml.kernel.org/r/87twk06yxp.fsf@ashishki-desk.ger.corp.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 31 March 2016, 07:54:07 UTC |
| 8fdc653 | Peter Zijlstra | 29 March 2016, 07:26:44 UTC | perf/core: Fix time tracking bug with multiplexing Stephane reported that commit: 3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME") introduced a regression wrt. time tracking, as easily observed by: > This patch introduce a bug in the time tracking of events when > multiplexing is used. > > The issue is easily reproducible with the following perf run: > > $ perf stat -a -C 0 -e branches,branches,branches,branches,branches,branches -I 1000 > 1.000730239 652,394 branches (66.41%) > 1.000730239 597,809 branches (66.41%) > 1.000730239 593,870 branches (66.63%) > 1.000730239 651,440 branches (67.03%) > 1.000730239 656,725 branches (66.96%) > 1.000730239 <not counted> branches > > One branches event is shown as not having run. Yet, with > multiplexing, all events should run especially with a 1s (-I 1000) > interval. The delta for time_running comes out to 0. Yet, the event > has run because the kernel is actually multiplexing the events. The > problem is that the time tracking is the kernel and especially in > ctx_sched_out() is wrong now. > > The problem is that in case that the kernel enters ctx_sched_out() with the > following state: > ctx->is_active=0x7 event_type=0x1 > Call Trace: > [<ffffffff813ddd41>] dump_stack+0x63/0x82 > [<ffffffff81182bdc>] ctx_sched_out+0x2bc/0x2d0 > [<ffffffff81183896>] perf_mux_hrtimer_handler+0xf6/0x2c0 > [<ffffffff811837a0>] ? __perf_install_in_context+0x130/0x130 > [<ffffffff810f5818>] __hrtimer_run_queues+0xf8/0x2f0 > [<ffffffff810f6097>] hrtimer_interrupt+0xb7/0x1d0 > [<ffffffff810509a8>] local_apic_timer_interrupt+0x38/0x60 > [<ffffffff8175ca9d>] smp_apic_timer_interrupt+0x3d/0x50 > [<ffffffff8175ac7c>] apic_timer_interrupt+0x8c/0xa0 > > In that case, the test: > if (is_active & EVENT_TIME) > > will be false and the time will not be updated. Time must always be updated on > sched out. Fix this by always updating time if EVENT_TIME was set, as opposed to only updating time when EVENT_TIME changed. Reported-by: Stephane Eranian <eranian@google.com> Tested-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: kan.liang@intel.com Cc: namhyung@kernel.org Fixes: 3cbaa5906967 ("perf: Fix ctx time tracking by introducing EVENT_TIME") Link: http://lkml.kernel.org/r/20160329072644.GB3408@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 31 March 2016, 07:54:06 UTC |
| c932cf0 | Ingo Molnar | 31 March 2016, 06:27:35 UTC | Merge tag 'perf-urgent-for-mingo-20160330' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix determination of a callchain node's childlessness in the top/report TUI, which was preventing navigating some callchains, --stdio unnaffected (Andres Freund) - Fix jitdump's genelf assumption that PowerPC is big endian only (Anton Blanchard) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 31 March 2016, 06:27:35 UTC |
| 7500c38 | Al Viro | 31 March 2016, 04:23:05 UTC | fix the braino in "namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()" We should try to trigger automount *before* bailing out on negative dentry. Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: Arend van Spriel <arend@broadcom.com> Tested-by: Arend van Spriel <arend@broadcom.com> Tested-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 31 March 2016, 04:23:05 UTC |
| 839559e | Christoph Hellwig | 29 March 2016, 11:03:35 UTC | target: add a new add_wwn_groups fabrics method We need to have the WWN fully initialized before addig default groups to it, so add a new method to add these groups after the WWN has been initialized. Also remove the default groups in the core while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 31 March 2016, 03:06:44 UTC |
| e6e202e | Christoph Hellwig | 29 March 2016, 11:03:34 UTC | target: initialize the nacl base CIT begfore init_nodeacl The iSCSI targets wants to add a default group, for which we need to have the list of default groups initialized previously. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 31 March 2016, 03:06:43 UTC |
| ce7043f | Christoph Hellwig | 29 March 2016, 11:03:33 UTC | target: remove ->fabric_cleanup_nodeacl Instead we can clean up the list of default ACLs in core code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 31 March 2016, 03:06:43 UTC |
| 572a143 | Sagi Grimberg | 24 February 2016, 17:24:09 UTC | iser-target: Use ib_drain_qp Now the rdma core offers a QP draining service in v4.6-rc1, use it instead of our own. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 31 March 2016, 03:05:15 UTC |
| 1e6d88c | Linus Torvalds | 31 March 2016, 01:40:42 UTC | Merge tag 'nios2-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 fix from Ley Foon Tan: "Replace fdt_translate_address with of_flat_dt_translate_address" Fixes a build failure. * tag 'nios2-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Replace fdt_translate_address with of_flat_dt_translate_address | 31 March 2016, 01:40:42 UTC |
