Skip to main content

Browse the archive

Revision 9e3a9d1ed8cc8db93e5c53e9a5b09065bd95de8b authored by Len Brown on 06 February 2009, 19:00:56 UTC, committed by Len Brown on 06 February 2009, 19:00:56 UTC 
ACPI: disable ACPI cleanly when bad RSDP found
 
When ACPI is disabled in the BIOS of this VIA C3 box,
it invalidates the RSDP, which Linux notices:

ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926]

Bug Linux neglected to disable ACPI at that stage,
and later scribbled on smp_found_config:

ACPI: No APIC-table, disabling MPS

But this box doesn't run well in legacy PIC mode,
it needed IOAPIC mode to perform correctly:

http://lkml.org/lkml/2009/2/5/39

So exit ACPI mode cleanly when we first detect
that it is hopeless.

Signed-off-by: Len Brown <len.brown@intel.com>
1 parent f3b39f1
Raw File
dsp56k.h 
/*
 * linux/include/asm-m68k/dsp56k.h - defines and declarations for
 *                                   DSP56k device driver
 *
 * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive
 * for more details.
 */


/* Used for uploading DSP binary code */
struct dsp56k_upload {
	int len;
	char __user *bin;
};

/* For the DSP host flags */
struct dsp56k_host_flags {
	int dir;     /* Bit field. 1 = write output bit, 0 = do nothing.
		      * 0x0000 means reading only, 0x0011 means
		      * writing the bits stored in `out' on HF0 and HF1.
		      * Note that HF2 and HF3 can only be read.
		      */
	int out;     /* Bit field like above. */
	int status;  /* Host register's current state is returned */
};

/* ioctl command codes */
#define DSP56K_UPLOAD	        1    /* Upload DSP binary program       */
#define DSP56K_SET_TX_WSIZE	2    /* Host transmit word size (1-4)   */
#define DSP56K_SET_RX_WSIZE	3    /* Host receive word size (1-4)    */
#define DSP56K_HOST_FLAGS	4    /* Host flag registers             */
#define DSP56K_HOST_CMD         5    /* Trig Host Command (0-31)        */
back to top