Skip to main content

Browse the archive

https://github.com/torvalds/linux
17 May 2024, 11:00:25 UTC
sort by:
Revision Author Date Message Commit Date
465de97 Mark Brown 04 March 2015, 20:42:40 UTC Merge remote-tracking branch 'asoc/fix/max98357a' into asoc-linus 04 March 2015, 20:42:40 UTC
09269e4 Mark Brown 04 March 2015, 20:42:39 UTC Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 04 March 2015, 20:42:39 UTC
9d22fd3 Mark Brown 04 March 2015, 20:42:38 UTC Merge remote-tracking branch 'asoc/fix/fsl-ssi' into asoc-linus 04 March 2015, 20:42:38 UTC
ed87e29 Mark Brown 04 March 2015, 20:42:37 UTC Merge remote-tracking branch 'asoc/fix/cirrus' into asoc-linus 04 March 2015, 20:42:37 UTC
64a0713 Mark Brown 04 March 2015, 20:42:37 UTC Merge remote-tracking branch 'asoc/fix/atmel-build' into asoc-linus 04 March 2015, 20:42:37 UTC
17f4803 Rafael J. Wysocki 26 February 2015, 23:07:55 UTC genirq / PM: Add flag for shared NO_SUSPEND interrupt lines It currently is required that all users of NO_SUSPEND interrupt lines pass the IRQF_NO_SUSPEND flag when requesting the IRQ or the WARN_ON_ONCE() in irq_pm_install_action() will trigger. That is done to warn about situations in which unprepared interrupt handlers may be run unnecessarily for suspended devices and may attempt to access those devices by mistake. However, it may cause drivers that have no technical reasons for using IRQF_NO_SUSPEND to set that flag just because they happen to share the interrupt line with something like a timer. Moreover, the generic handling of wakeup interrupts introduced by commit 9ce7a25849e8 (genirq: Simplify wakeup mechanism) only works for IRQs without any NO_SUSPEND users, so the drivers of wakeup devices needing to use shared NO_SUSPEND interrupt lines for signaling system wakeup generally have to detect wakeup in their interrupt handlers. Thus if they happen to share an interrupt line with a NO_SUSPEND user, they also need to request that their interrupt handlers be run after suspend_device_irqs(). In both cases the reason for using IRQF_NO_SUSPEND is not because the driver in question has a genuine need to run its interrupt handler after suspend_device_irqs(), but because it happens to share the line with some other NO_SUSPEND user. Otherwise, the driver would do without IRQF_NO_SUSPEND just fine. To make it possible to specify that condition explicitly, introduce a new IRQ action handler flag for shared IRQs, IRQF_COND_SUSPEND, that, when set, will indicate to the IRQ core that the interrupt user is generally fine with suspending the IRQ, but it also can tolerate handler invocations after suspend_device_irqs() and, in particular, it is capable of detecting system wakeup and triggering it as appropriate from its interrupt handler. That will allow us to work around a problem with a shared timer interrupt line on at91 platforms. Link: http://marc.info/?l=linux-kernel&m=142252777602084&w=2 Link: http://marc.info/?t=142252775300011&r=1&w=2 Link: https://lkml.org/lkml/2014/12/15/552 Reported-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> 04 March 2015, 20:42:19 UTC
6587457 Linus Torvalds 04 March 2015, 17:59:51 UTC Merge tag 'dma-buf-for-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf Pull dma-buf fixes from Sumit Semwal: "Minor timeout & other fixes on reservation/fence" * tag 'dma-buf-for-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: reservation: Remove shadowing local variable 'ret' dma-buf/fence: don't wait when specified timeout is zero reservation: wait only with non-zero timeout specified (v3) 04 March 2015, 17:59:51 UTC
b8e81a3 Linus Torvalds 04 March 2015, 17:54:10 UTC Merge git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Marcelo Tosatti: "KVM bug fixes, including a SVM interrupt injection regression fix, MIPS and ARM bug fixes" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MIPS: Enable after disabling interrupt KVM: MIPS: Fix trace event to save PC directly KVM: SVM: fix interrupt injection (apic->isr_count always 0) KVM: emulate: fix CMPXCHG8B on 32-bit hosts KVM: VMX: fix build without CONFIG_SMP arm/arm64: KVM: Add exit reaons to kvm_exit event tracing ARM: KVM: Fix size check in __coherent_cache_guest_page 04 March 2015, 17:54:10 UTC
f2cb477 Linus Torvalds 04 March 2015, 17:27:22 UTC Merge tag 'arc-4.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix for /proc/<pid>/maps "stack" vma annotation - sched stats not printing correct sleeping task PC - perf not reporting page faults * tag 'arc-4.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix thread_saved_pc() ARC: Fix KSTK_ESP() ARC: perf: Enable generic software events ARC: Make arc_unwind_core accessible externally 04 March 2015, 17:27:22 UTC
d51199a Peter Ujfalusi 03 March 2015, 11:38:14 UTC ASoC: omap-pcm: Correct dma mask DMA_BIT_MASK of 64 is not valid dma address mask for OMAPs, it should be set to 32. The 64 was introduced by commit (in 2009): a152ff24b978 ASoC: OMAP: Make DMA 64 aligned But the dma_mask and coherent_dma_mask can not be used to specify alignment. Fixes: a152ff24b978 (ASoC: OMAP: Make DMA 64 aligned) Reported-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org 04 March 2015, 17:23:31 UTC
97754e3 Linus Torvalds 04 March 2015, 17:22:46 UTC Merge tag 'powerpc-4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - Fix for dynticks. - Fix for smpboot bug. - Fix for IOMMU group refcounting. * tag 'powerpc-4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/iommu: Remove IOMMU device references via bus notifier powerpc/smp: Wait until secondaries are active & online powerpc: Re-enable dynticks 04 March 2015, 17:22:46 UTC
28d6340 Chris Wilson 01 March 2015, 10:41:38 UTC ACPI / video: Propagate the error code for acpi_video_register Report the actual error code from acpi_bus_register_driver(), it may help future debugging (typically ENODEV as previously reported, but the unusual cases are where it may help most). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 04 March 2015, 14:10:36 UTC
6e17cb1 Chris Wilson 01 March 2015, 10:41:37 UTC ACPI / video: Load the module even if ACPI is disabled i915.ko depends upon the acpi/video.ko module and so refuses to load if ACPI is disabled at runtime if for example the BIOS is broken beyond repair. acpi/video provides an optional service for i915.ko and so we should just allow the modules to load, but do no nothing in order to let the machines boot correctly. Reported-by: Bill Augur <bill-auger@programmer.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: All applicable <stable@vger.kernel.org> Acked-by: Aaron Lu <aaron.lu@intel.com> [ rjw: Fixed up the new comment in acpi_video_init() ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 04 March 2015, 14:10:36 UTC
66a5ca4 Kevin Hilman 02 March 2015, 19:24:28 UTC PM / Domains: cleanup: rename gpd -> genpd in debugfs interface To keep consisitency with the rest of the file, use 'genpd' as the name of the 'struct generic_pm_domain' pointer instead of 'gpd'. This is just a rename, no functional changes. Signed-off-by: Kevin Hilman <khilman@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 04 March 2015, 13:18:44 UTC
5877b4f Geert Uytterhoeven 04 March 2015, 11:56:20 UTC cpufreq: ppc: Add missing #include <asm/smp.h> If CONFIG_SMP=n, <linux/smp.h> does not include <asm/smp.h>, causing: drivers/cpufreq/ppc-corenet-cpufreq.c: In function 'corenet_cpufreq_cpu_init': drivers/cpufreq/ppc-corenet-cpufreq.c:173:3: error: implicit declaration of function 'get_hard_smp_processor_id' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 04 March 2015, 13:14:54 UTC
aa714d2 Jiang Liu 04 March 2015, 08:47:12 UTC x86/PCI/ACPI: Relax ACPI resource descriptor checks to work around BIOS bugs Some BIOSes report incorrect length for ACPI address space descriptors, so relax the checks to avoid regressions. This issue has appeared several times as: 3162b6f0c5e1 ("PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1") d558b483d5a7 ("x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1") f238b414a74a ("PNPACPI: compute Address Space length rather than using _LEN") 48728e077480 ("x86/PCI: compute Address Space length rather than using _LEN") Please refer to https://bugzilla.kernel.org/show_bug.cgi?id=94221 for more details and example malformed ACPI resource descriptors. Link: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Dave Airlie <airlied@redhat.com> Tested-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 04 March 2015, 13:09:50 UTC
63f1789 Jiang Liu 04 March 2015, 08:47:11 UTC x86/PCI/ACPI: Ignore resources consumed by host bridge itself When parsing resources for PCI host bridge, we should ignore resources consumed by host bridge itself and only report window resources available to child PCI busses. Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 04 March 2015, 13:09:44 UTC
1eed601 Qiao Zhou 03 March 2015, 01:16:08 UTC dma: mmp-tdma: refine dma disable and dma-pos update Below are the refinements. 1. Set DMA abort bit when disabling dma channel. This will clear the remaining data in dma FIFO, to fix channel-swap issue. 2. Read DMA HW pointer when updating DMA status. Previously dma position is calculated by adding one period size in dma interrupt. This is inaccurate/insufficient for some high-quality audio APP. Since interrupt bottom half handler has variable schedule delay, it causes big error when calculating sample delay. Read the actual HW pointer and feedback can improve the accuracy. 3. Do some minor code clean. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 04 March 2015, 12:33:15 UTC
ab3be73 Imre Deak 02 March 2015, 11:04:41 UTC drm/i915: gen4: work around hang during hibernation Bjørn reported that his machine hang during hibernation and eventually bisected the problem to the following commit: commit da2bc1b9db3351addd293e5b82757efe1f77ed1d Author: Imre Deak <imre.deak@intel.com> Date: Thu Oct 23 19:23:26 2014 +0300 drm/i915: add poweroff_late handler The problem seems to be that after the kernel puts the device into D3 the BIOS still tries to access it, or otherwise assumes that it's in D0. This is clearly bogus, since ACPI mandates that devices are put into D3 by the OSPM if they are not wake-up sources. In the future we want to unify more of the driver's runtime and system suspend paths, for example by skipping all the system suspend/hibernation hooks if the device is runtime suspended already. Accordingly for all other platforms the goal is still to properly power down the device during hibernation. v2: - Another GEN4 Lenovo laptop had the same issue, while platforms from other vendors (including mobile and desktop, GEN4 and non-GEN4) seem to work fine. Based on this apply the workaround on all GEN4 Lenovo platforms. - add code comment about failing platforms (Ville) Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/060633.html Reported-and-bisected-by: Bjørn Mork <bjorn@mork.no> Cc: stable@vger.kernel.org # v3.19 Signed-off-by: Imre Deak <imre.deak@intel.com> Acked-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> 04 March 2015, 08:08:50 UTC
54fc7c1 Chris Wilson 26 February 2015, 15:53:02 UTC drm/i915: Check for driver readyness before handling an underrun interrupt When we takeover from the BIOS and install our interrupt handler, the BIOS may have left us a few surprises in the form of spontaneous interrupts. (This is especially likely on hardware like 965gm where display fifo underruns are continuous and the GMCH cannot filter that interrupt souce.) As we enable our IRQ early so that we can use it during hardware probing, our interrupt handler must be prepared to handle a few sources prior to being fully configured. As such, we need to add a simple is-ready check prior to dereferencing our KMS state for reporting underruns. Reported-by: Rob Clark <rclark@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1193972 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org [Jani: dropped the extra !] Signed-off-by: Jani Nikula <jani.nikula@intel.com> 04 March 2015, 08:04:19 UTC
e11259f Trond Myklebust 04 March 2015, 01:35:31 UTC NFSv4.1: Clear the old state by our client id before establishing a new lease If the call to exchange-id returns with the EXCHGID4_FLAG_CONFIRMED_R flag set, then that means our lease was established by a previous mount instance. Ensure that we detect this situation, and that we clear the state held by that mount. Reported-by: Jorge Mora <Jorge.Mora@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 04 March 2015, 02:52:30 UTC
4ad04e5 Nishanth Aravamudan 21 February 2015, 19:00:50 UTC powerpc/iommu: Remove IOMMU device references via bus notifier After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 04 March 2015, 02:19:33 UTC
875ebe9 Michael Ellerman 24 February 2015, 06:58:02 UTC powerpc/smp: Wait until secondaries are active & online Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96976f "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96976f ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> 04 March 2015, 02:19:33 UTC
48d66b9 Trond Myklebust 04 March 2015, 01:28:59 UTC NFSv4: Fix a race in NFSv4.1 server trunking discovery We do not want to allow a race with another NFS mount to cause nfs41_walk_client_list() to establish a lease on our nfs_client before we're done checking for trunking. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 04 March 2015, 01:42:23 UTC
a6c5170 Linus Torvalds 03 March 2015, 23:52:50 UTC Merge branch 'for-4.0' of git://linux-nfs.org/~bfields/linux Pull nfsd fixes from Bruce Fields: "Three miscellaneous bugfixes, most importantly the clp->cl_revoked bug, which we've seen several reports of people hitting" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: integer underflow in rsc_parse() nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd svcrpc: fix memory leak in gssp_accept_sec_context_upcall 03 March 2015, 23:52:50 UTC
789d7f6 Linus Torvalds 03 March 2015, 23:30:07 UTC Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ... 03 March 2015, 23:30:07 UTC
77ae5f4 Alex Deucher 03 March 2015, 22:00:43 UTC drm/radeon: fix interlaced modes on DCE8 Need to double the viewport height. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:31 UTC
a28b2a4 Tommi Rantala 02 March 2015, 19:36:07 UTC drm/radeon: fix DRM_IOCTL_RADEON_CS oops Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:30 UTC
cffefd9 Alex Deucher 03 March 2015, 01:45:24 UTC drm/radeon: do a posting read in cik_set_irq To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:29 UTC
0586915 Alex Deucher 03 March 2015, 01:43:53 UTC drm/radeon: do a posting read in si_set_irq To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:29 UTC
c320bb5 Alex Deucher 03 March 2015, 01:42:53 UTC drm/radeon: do a posting read in evergreen_set_irq To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:28 UTC
9d1393f Alex Deucher 03 March 2015, 01:41:31 UTC drm/radeon: do a posting read in r600_set_irq To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:27 UTC
54acf10 Alex Deucher 03 March 2015, 01:39:56 UTC drm/radeon: do a posting read in rs600_set_irq To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:27 UTC
f957063 Alex Deucher 03 March 2015, 01:36:26 UTC drm/radeon: do a posting read in r100_set_irq To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org 03 March 2015, 22:28:26 UTC
2afa326 Slava Grigorev 02 March 2015, 17:05:29 UTC radeon/audio: fix DP audio on DCE6 Split DCE6 and DCE8 programming of DCCG_AUDIO_DTO1 registers to properly enable DP audio for both DCE revisions. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:26 UTC
b983a8f Slava Grigorev 02 March 2015, 16:31:07 UTC radeon/audio: fix whitespace Use proper tabs. Signed-off-by: Slava Grigorev <slava.grigorev@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:25 UTC
5c046a5 Alex Deucher 27 February 2015, 22:26:53 UTC drm/radeon: adjust audio callback order - Move it out of the UNIPHY case to handle older DCE blocks. - set audio dpms before video dpms Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:24 UTC
aeefd07 Alex Deucher 27 February 2015, 19:43:47 UTC drm/radeon: properly set dto for dp on DCE4/5 If DCPLL or ext PLL is used, use the disp clk. If PPLL is used, use the dp clock. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:24 UTC
b20932d Alex Deucher 27 February 2015, 15:51:40 UTC drm/radeon/audio: update EDID derived fields in modeset We don't necessarily have an EDID at this point when audio detect gets called. Ideally we'd update these fields in detect, but that requires a larger rework of the display detect code. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:23 UTC
3ed7cee Alex Deucher 27 February 2015, 15:42:21 UTC drm/radeon: don't toggle audio state in modeset Should be done only at detect time to avoid spurious state changes on the audio side. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:22 UTC
88af339 Alex Deucher 27 February 2015, 15:38:40 UTC drm/radeon/audio: set mute around state setup To avoid possible sound artifacts while setting up audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:22 UTC
d3c34d2 Alex Deucher 27 February 2015, 15:36:39 UTC drm/radeon: assign pin in detect We need the pin from detect on, it's too late in dpms. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:21 UTC
add7d75 Alex Deucher 27 February 2015, 15:04:11 UTC drm/radeon: fix the audio dpms callbacks Don't touch the audio enable bits as these are already handled in display detection. Enable the hdmi secondary streams in hdmi enable to match dp. Rename dp dpms callback to be consistent with hdmi. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89327 https://bugzilla.kernel.org/show_bug.cgi?id=93921 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 03 March 2015, 22:28:20 UTC
f4f8e73 Joe Stringer 03 March 2015, 02:49:56 UTC openvswitch: Fix serialization of non-masked set actions. Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions back to regular set actions, the inner attribute length was not changed, ie, double the length being serialized. This patch fixes the bug. Fixes: 83d2b9b ("net: openvswitch: Support masked set actions.") Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 19:38:57 UTC
0ae93b2 Guenter Roeck 02 March 2015, 20:03:27 UTC gianfar: Reduce logging noise seen due to phy polling if link is down Commit 6ce29b0e2a04 ("gianfar: Avoid unnecessary reg accesses in adjust_link()") eliminates unnecessary calls to adjust_link for phy devices which don't support interrupts and need polling. As part of that work, the 'new_state' local flag, which was used to reduce logging noise on the console, was eliminated. Unfortunately, that means that a 'Link is Down' log message will now be issued continuously if a link is configured as UP, the link state is down, and the associated phy requires polling. This occurs because priv->oldduplex is -1 in this case, which always differs from phydev->duplex. In addition, phydev->speed may also differ from priv->oldspeed. gfar_update_link_state() is therefore called each time a phy is polled, even if the link state did not change. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 19:37:30 UTC
c77c761 Thomas Falcon 02 March 2015, 17:56:12 UTC ibmveth: Add function to enable live MAC address changes Add a function that will enable changing the MAC address of an ibmveth interface while it is still running. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 19:36:17 UTC
71e168b Florian Westphal 03 March 2015, 12:53:31 UTC net: bridge: add compile-time assert for cb struct size make build fail if structure no longer fits into ->cb storage. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 19:07:04 UTC
ef070dc Trond Myklebust 03 March 2015, 05:06:35 UTC NFS: Don't write enable new pages while an invalidation is proceeding nfs_vm_page_mkwrite() should wait until the page cache invalidation is finished. This is the second patch in a 2 patch series to deprecate the NFS client's reliance on nfs_release_page() in the context of nfs_invalidate_mapping(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 03 March 2015, 18:58:08 UTC
874f946 Trond Myklebust 03 March 2015, 04:32:08 UTC NFS: Fix a regression in the read() syscall When invalidating the page cache for a regular file, we want to first sync all dirty data to disk and then call invalidate_inode_pages2(). The latter relies on nfs_launder_page() and nfs_release_page() to deal respectively with dirty pages, and unstable written pages. When commit 9590544694bec ("NFS: avoid deadlocks with loop-back mounted NFS filesystems.") changed the behaviour of nfs_release_page(), then it made it possible for invalidate_inode_pages2() to fail with an EBUSY. Unfortunately, that error is then propagated back to read(). Let's therefore work around the problem for now by protecting the call to sync the data and invalidate_inode_pages2() so that they are atomic w.r.t. the addition of new writes. Later on, we can revisit whether or not we still need nfs_launder_page() and nfs_release_page(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 03 March 2015, 18:02:29 UTC
13a7a6a Linus Torvalds 03 March 2015, 17:04:59 UTC Linux 4.0-rc2 03 March 2015, 17:04:59 UTC
9128b04 Daniel Vetter 03 March 2015, 16:31:21 UTC drm/i915: Fix modeset state confusion in the load detect code This is a tricky story of the new atomic state handling and the legacy code fighting over each another. The bug at hand is an underrun of the framebuffer reference with subsequent hilarity caused by the load detect code. Which is peculiar since the the exact same code works fine as the implementation of the legacy setcrtc ioctl. Let's look at the ingredients: - Currently our code is a crazy mix of legacy modeset interfaces to set the parameters and half-baked atomic state tracking underneath. While this transition is going we're using the transitional plane helpers to update the atomic side (drm_plane_helper_disable/update and friends), i.e. plane->state->fb. Since the state structure owns the fb those functions take care of that themselves. The legacy state (specifically crtc->primary->fb) is still managed by the old code (and mostly by the drm core), with the fb reference counting done by callers (core drm for the ioctl or the i915 load detect code). The relevant commit is commit ea2c67bb4affa84080c616920f3899f123786e56 Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) - drm_plane_helper_disable has special code to handle multiple calls in a row - it checks plane->crtc == NULL and bails out. This is to match the proper atomic implementation which needs the crtc to get at the implied locking context atomic updates always need. See commit acf24a395c5a9290189b080383564437101d411c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 29 15:33:05 2014 +0200 drm/plane-helper: transitional atomic plane helpers - The universal plane code split out the implicit primary plane from the CRTC into it's own full-blown drm_plane object. As part of that the setcrtc ioctl (which updated both the crtc mode and primary plane) learned to set crtc->primary->crtc on modeset to make sure the plane->crtc assignments statate up to date in commit e13161af80c185ecd8dc4641d0f5df58f9e3e0af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) Unfortunately we've forgotten to update the load detect code. Which wasn't a problem since the load detect modeset is temporary and always undone before we drop the locks. - Finally there is a organically grown history (i.e. don't ask) around who sets the legacy plane->fb for the various driver entry points. Originally updating that was the drivers duty, but for almost all places we've moved that (plus updating the refcounts) into the core. Again the exception is the load detect code. Taking all together the following happens: - The load detect code doesn't set crtc->primary->crtc. This is only really an issue on crtcs never before used or when userspace explicitly disabled the primary plane. - The plane helper glue code short-circuits because of that and leaves a non-NULL fb behind in plane->state->fb and plane->fb. The state fb isn't a real problem (it's properly refcounted on its own), it's just the canary. - Load detect code drops the reference for that fb, but doesn't set plane->fb = NULL. This is ok since it's still living in that old world where drivers had to clear the pointer but the core/callers handled the refcounting. - On the next modeset the drm core notices plane->fb and takes care of refcounting it properly by doing another unref. This drops the refcount to zero, leaving state->plane now pointing at freed memory. - intel_plane_duplicate_state still assume it owns a reference to that very state->fb and bad things start to happen. Fix this all by applying the same duct-tape as for the legacy setcrtc ioctl code and set crtc->primary->crtc properly. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 03 March 2015, 17:04:33 UTC
31f3032 Vishal Thanki 03 March 2015, 13:29:00 UTC ASoC: simple-card: Add a NULL pointer check in asoc_simple_card_dai_link_of Make sure devm_kzalloc() succeeds. Signed-off-by: Vishal Thanki <vishalthanki@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> 03 March 2015, 14:25:16 UTC
ed9ed50 Dave Airlie 03 March 2015, 10:58:43 UTC Revert "drm/rockchip: Flip select/depends in Kconfig" This reverts commit 9c58e8dbd3bfe7197323c88a784617afeffa9f87. This doesn't seem to fully fix this, Kbuild who knows. Signed-off-by: Dave Airlie <airlied@redhat.com> 03 March 2015, 11:11:34 UTC
9c58e8d Daniel Vetter 03 March 2015, 09:58:08 UTC drm/rockchip: Flip select/depends in Kconfig Otherwise Kconfig gets confused and somehow ends up creating a 2nd drm submenu. I couldn't find i915 because of this any more at first. Cc: Andy Yan <andy.yan@rock-chips.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: linux-kbuild@vger.kernel.or Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@gmail.com> 03 March 2015, 10:31:16 UTC
9d0685a Dave Airlie 03 March 2015, 09:57:41 UTC Merge tag 'imx-drm-fixes-2015-02-24' of git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm fixes for mode fixup, dw_hdmi/imx, and parallel-display - A clock fix for too large pixel clocks depending on the DI clock flag simplification patch - Pruning of unsupported modes and a missing end of array element for dw_hdmi-imx - LVDS modeset fix for mode fixup - Fix parallel-display deferred probing if drm_panel is used * tag 'imx-drm-fixes-2015-02-24' of git://git.pengutronix.de/git/pza/linux: DRM: i.MX: parallel display: Support probe deferral for finding DRM panel drm/imx: imx-ldb: enable DI clock in encoder_mode_set drm/imx: dw_hdmi-imx: add end of array element to current control array drm/imx: dw_hdmi-imx: add mode_valid callback prune unsupported modes gpu: ipu-v3: do not divide by zero if the pixel clock is too large 03 March 2015, 09:57:41 UTC
6d65261 Tyler Hicks 25 February 2015, 01:28:10 UTC eCryptfs: don't pass fs-specific ioctl commands through eCryptfs can't be aware of what to expect when after passing an arbitrary ioctl command through to the lower filesystem. The ioctl command may trigger an action in the lower filesystem that is incompatible with eCryptfs. One specific example is when one attempts to use the Btrfs clone ioctl command when the source file is in the Btrfs filesystem that eCryptfs is mounted on top of and the destination fd is from a new file created in the eCryptfs mount. The ioctl syscall incorrectly returns success because the command is passed down to Btrfs which thinks that it was able to do the clone operation. However, the result is an empty eCryptfs file. This patch allows the trim, {g,s}etflags, and {g,s}etversion ioctl commands through and then copies up the inode metadata from the lower inode to the eCryptfs inode to catch any changes made to the lower inode's metadata. Those five ioctl commands are mostly common across all filesystems but the whitelist may need to be further pruned in the future. https://bugzilla.kernel.org/show_bug.cgi?id=93691 https://launchpad.net/bugs/1305335 Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Cc: Rocko <rockorequin@hotmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org # v2.6.36+: c43f7b8 eCryptfs: Handle ioctl calls with unlocked and compat functions 03 March 2015, 08:03:56 UTC
c7d373c Max Mansfield 03 March 2015, 01:38:02 UTC usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boards This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield <max.m.mansfield@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> 03 March 2015, 06:47:06 UTC
acf8dd0 Michal Kubeček 02 March 2015, 17:27:11 UTC udp: only allow UFO for packets from SOCK_DGRAM sockets If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer checksum is to be computed on segmentation. However, in this case, skb->csum_start and skb->csum_offset are never set as raw socket transmit path bypasses udp_send_skb() where they are usually set. As a result, driver may access invalid memory when trying to calculate the checksum and store the result (as observed in virtio_net driver). Moreover, the very idea of modifying the userspace provided UDP header is IMHO against raw socket semantics (I wasn't able to find a document clearly stating this or the opposite, though). And while allowing CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit too intrusive change just to handle a corner case like this. Therefore disallowing UFO for packets from SOCK_DGRAM seems to be the best option. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 03:19:29 UTC
096b1c1 David S. Miller 03 March 2015, 02:31:00 UTC Merge branch 'sh_eth' Ben Hutchings says: ==================== Fixes for sh_eth #4 v2 I'm continuing review and testing of Ethernet support on the R-Car H2 chip, with help from a colleague. This series fixes a few more issues. These are not tested on any of the other supported chips. v2: Add note that the revert is not a pure revert. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 02:31:00 UTC
dacc73e Ben Hutchings 03 March 2015, 00:53:08 UTC sh_eth: Really fix padding of short frames on TX My previous fix to clear padding of short frames used skb->len as the DMA length, assuming that skb_padto() extended skb->len to include the padding. That isn't the case; we need to use skb_put_padto() instead. (This wasn't immediately obvious because software padding isn't actually needed on the R-Car H2. We could make it conditional on which chip is being driven, but it's probably not worth the effort.) Reported-by: "Violeta Menéndez González" <violeta.menendez@codethink.co.uk> Fixes: 612a17a54b50 ("sh_eth: Fix padding of short frames on TX") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 02:30:56 UTC
9b4a636 Ben Hutchings 03 March 2015, 00:52:39 UTC Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" This reverts commit fd9af07c3404ac9ecbd0d859563360f51ce1ffde. The hardware manual states that the frame error and multicast bits are copied to bits 9:0 of RD0, not bits 25:16. I've tested that this is true for RFS1 (CRC error), RFS3 (frame too short), RFS4 (frame too long) and RFS8 (multicast). Also adjust a comment to agree with this. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 02:30:56 UTC
6ded286 Ben Hutchings 03 March 2015, 00:52:08 UTC sh_eth: Fix RX recovery on R-Car in case of RX ring underrun In case of RX ring underrun (RDE), we attempt to reset the software descriptor pointers (dirty_rx and cur_rx) to match where the hardware will read the next descriptor from, as that might not be the first dirty descriptor. This relies on reading RDFAR, but that register doesn't exist on all supported chips - specifically, not on the R-Car chips. This will result in unpredictable behaviour on those chips after an RDE. Make this pointer reset conditional and assume that it isn't needed on the R-Car chips. This fix also assumes that RDFAR is never exposed at offset 0 in the memory map - this is currently true, and a subsequent commit will fix the ambiguity between offset 0 and no-offset in the register offset maps. Fixes: 79fba9f51755 ("net: sh_eth: fix the rxdesc pointer when rx ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 02:30:56 UTC
7d7355f Ben Hutchings 03 March 2015, 00:52:00 UTC sh_eth: Ensure proper ordering of descriptor active bit write/read When submitting a DMA descriptor, the active bit must be written last. When reading a completed DMA descriptor, the active bit must be read first. Add memory barriers to ensure that this ordering is maintained. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> 03 March 2015, 02:30:56 UTC
78045bf Eduardo Valentin 03 March 2015, 02:15:34 UTC Merge branch 'fixes' of github.com:lmajewski/linux-samsung-thermal into work-fixes Pull samsung thermal fixes from Lukasz Majewski: "Changes: - Exynos7 power down detection mode fix - Fix for cpufreq cooling device regression - Updating MAINTAINER's entry for Samsung Exynos Thermal" Signed-off-by: Eduardo Valentin <edubezval@gmail.com> 03 March 2015, 02:18:31 UTC
c064a0d Peter Zijlstra 28 February 2015, 21:24:48 UTC livepatch: fix RCU usage in klp_find_external_symbol() While one must hold RCU-sched (aka. preempt_disable) for find_symbol() one must equally hold it over the use of the object returned. The moment you release the RCU-sched read lock, the object can be dead and gone. [jkosina@suse.cz: change subject line to be aligned with other patches] Cc: Seth Jennings <sjenning@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> 02 March 2015, 23:22:55 UTC
ec3ca4e Trond Myklebust 26 February 2015, 19:05:05 UTC NFSv4: Ensure we skip delegations that are already being returned In nfs_client_return_marked_delegations() and nfs_delegation_reap_unclaimed() we want to optimise the loop traversal by skipping delegations that are already in the process of being returned. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 23:09:15 UTC
9f0f8e1 Trond Myklebust 26 February 2015, 14:57:34 UTC NFSv4: Pin the superblock while we're returning the delegation This patch ensures that the superblock doesn't go ahead and disappear underneath us while the state manager thread is returning delegations. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 23:09:14 UTC
ade0464 Trond Myklebust 27 February 2015, 19:25:50 UTC NFSv4: Ensure we honour NFS_DELEGATION_RETURNING in nfs_inode_set_delegation() Ensure that nfs_inode_set_delegation() doesn't inadvertently detach a delegation that is already in the process of being returned. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 23:09:14 UTC
b04b22f Trond Myklebust 26 February 2015, 18:59:38 UTC NFSv4: Ensure that we don't reap a delegation that is being returned Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 23:09:13 UTC
369d6b7 Anna Schumaker 02 March 2015, 21:46:09 UTC NFS: Fix stateid used for NFS v4 closes After 566fcec60 the client uses the "current stateid" from the nfs4_state structure to close a file. This could potentially contain a delegation stateid, which is disallowed by the protocol and causes servers to return NFS4ERR_BAD_STATEID. This patch restores the (correct) behavior of sending the open stateid to close a file. Reported-by: Olga Kornievskaia <kolga@netapp.com> Fixes: 566fcec60 (NFSv4: Fix an atomicity problem in CLOSE) Signed-off-by: Anna Schumaker <Anna.Schumaker@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 23:06:42 UTC
cfec0e7 Tapasweni Pathak 22 February 2015, 16:18:21 UTC KVM: MIPS: Enable after disabling interrupt Enable disabled interrupt, on unsuccessful operation. Found by Coccinelle. Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 02 March 2015, 22:18:12 UTC
b3cffac James Hogan 24 February 2015, 11:46:20 UTC KVM: MIPS: Fix trace event to save PC directly Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e6c4e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # v3.10+ Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 02 March 2015, 22:17:52 UTC
023a600 Linus Torvalds 02 March 2015, 22:13:39 UTC Merge tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Two GPIO fixes: - Fix a translation problem in of_get_named_gpiod_flags() - Fix a long standing container_of() mistake in the TPS65912 driver" * tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65912: fix wrong container_of arguments gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node 02 March 2015, 22:13:39 UTC
10d6dfc Linus Torvalds 02 March 2015, 22:08:10 UTC Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics: - Several fixes in tmon tool. - Fixes in intel int340x for _ART and _TRT tables. - Add id for Avoton SoC into powerclamp driver. - Fixes in RCAR thermal driver to remove race conditions and fix fail path - Fixes in TI thermal driver: removal of unnecessary code and build fix if !CONFIG_PM_SLEEP - Cleanups in exynos thermal driver - Add stubs for include/linux/thermal.h. Now drivers using thermal calls but that also work without CONFIG_THERMAL will be able to compile for systems that don't care about thermal. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: int340x_thermal: Ignore missing _ART, _TRT tables thermal/intel_powerclamp: add id for Avoton SoC tools/thermal: tmon: silence 'set but not used' warnings tools/thermal: tmon: use pkg-config to determine library dependencies tools/thermal: tmon: support cross-compiling tools/thermal: tmon: add .gitignore tools/thermal: tmon: fixup tui windowing calculations tools/thermal: tmon: tui: don't hard-code dialog window size assumptions tools/thermal: tmon: add min/max macros tools/thermal: tmon: add --target-temp parameter thermal: exynos: Clean-up code to use oneline entry for exynos compatible table thermal: rcar: Make error and remove paths symmetrical with init thermal: rcar: Fix race condition between init and interrupt thermal: Introduce dummy functions when thermal is not defined ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister" thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP 02 March 2015, 22:08:10 UTC
84471e2 Filipe Manana 28 February 2015, 22:29:22 UTC Btrfs: incremental send, don't rename a directory too soon There's one more case where we can't issue a rename operation for a directory as soon as we process it. We used to delay directory renames only if they have some ancestor directory with a higher inode number that got renamed too, but there's another case where we need to delay the rename too - when a directory A is renamed to the old name of a directory B but that directory B has its rename delayed because it has now (in the send root) an ancestor with a higher inode number that was renamed. If we don't delay the directory rename in this case, the receiving end of the send stream will attempt to rename A to the old name of B before B got renamed to its new name, which results in a "directory not empty" error. So fix this by delaying directory renames for this case too. Steps to reproduce: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/a $ mkdir /mnt/b $ mkdir /mnt/c $ touch /mnt/a/file $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ mv /mnt/c /mnt/x $ mv /mnt/a /mnt/x/y $ mv /mnt/b /mnt/a $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send /mnt/snap1 -f /tmp/1.send $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.send $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt2 $ btrfs receive /mnt2 -f /tmp/1.send $ btrfs receive /mnt2 -f /tmp/2.send ERROR: rename b -> a failed. Directory not empty A test case for xfstests follows soon. Reported-by: Ames Cornish <ames@cornishes.net> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:45 UTC
1932b7b David Sterba 24 February 2015, 17:57:18 UTC btrfs: fix lost return value due to variable shadowing A block-local variable stores error code but btrfs_get_blocks_direct may not return it in the end as there's a ret defined in the function scope. CC: <stable@vger.kernel.org> # 3.6+ Fixes: d187663ef24c ("Btrfs: lock extents as we map them in DIO") Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:45 UTC
5cdf83e Filipe Manana 23 February 2015, 19:50:49 UTC Btrfs: do not ignore errors from btrfs_lookup_xattr in do_setxattr The return value from btrfs_lookup_xattr() can be a pointer encoding an error, therefore deal with it. This fixes commit 5f5bc6b1e2d5 ("Btrfs: make xattr replace operations atomic"). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:45 UTC
5dfe2be Filipe Manana 23 February 2015, 19:48:52 UTC Btrfs: fix off-by-one logic error in btrfs_realloc_node The end_slot variable actually matches the number of pointers in the node and not the last slot (which is 'nritems - 1'). Therefore in order to check that the current slot in the for loop doesn't match the last one, the correct logic is to check if 'i' is less than 'end_slot - 1' and not 'end_slot - 2'. Fix this and set end_slot to be 'nritems - 1', as it's less confusing since the variable name implies it's inclusive rather then exclusive. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:45 UTC
e8c1c76 Filipe Manana 15 February 2015, 22:38:54 UTC Btrfs: add missing inode update when punching hole When punching a file hole if we endup only zeroing parts of a page, because the start offset isn't a multiple of the sector size or the start offset and length fall within the same page, we were not updating the inode item. This prevented an fsync from doing anything, if no other file changes happened in the current transaction, because the fields in btrfs_inode used to check if the inode needs to be fsync'ed weren't updated. This issue is easy to reproduce and the following excerpt from the xfstest case I made shows how to trigger it: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our test file. $XFS_IO_PROG -f -c "pwrite -S 0x22 -b 16K 0 16K" \ $SCRATCH_MNT/foo | _filter_xfs_io # Fsync the file, this makes btrfs update some btrfs inode specific fields # that are used to track if the inode needs to be written/updated to the fsync # log or not. After this fsync, the new values for those fields indicate that # a subsequent fsync does not need to touch the fsync log. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Force a commit of the current transaction. After this point, any operation # that modifies the data or metadata of our file, should update those fields in # the btrfs inode with values that make the next fsync operation write to the # fsync log. sync # Punch a hole in our file. This small range affects only 1 page. # This made the btrfs hole punching implementation write only some zeroes in # one page, but it did not update the btrfs inode fields used to determine if # the next fsync needs to write to the fsync log. $XFS_IO_PROG -c "fpunch 8000 4K" $SCRATCH_MNT/foo # Another variation of the previously mentioned case. $XFS_IO_PROG -c "fpunch 15000 100" $SCRATCH_MNT/foo # Now fsync the file. This was a no-operation because the previous hole punch # operation didn't update the inode's fields mentioned before, so they remained # with the values they had after the first fsync - that is, they indicate that # it is not needed to write to fsync log. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo echo "File content before:" od -t x1 $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey # Enable writes and mount the fs. This makes the fsync log replay code run. _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Because the last fsync didn't do anything, here the file content matched what # it was after the first fsync, before the holes were punched, and not what it # was after the holes were punched. echo "File content after:" od -t x1 $SCRATCH_MNT/foo This issue has been around since 2012, when the punch hole implementation was added, commit 2aaa66558172 ("Btrfs: add hole punching"). A test case for xfstests follows soon. Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:44 UTC
0c0ef4b Josef Bacik 12 February 2015, 14:43:51 UTC Btrfs: abort the transaction if we fail to update the free space cache inode Our gluster boxes were hitting a problem where they'd run out of space when updating the block group cache and therefore wouldn't be able to update the free space inode. This is a problem because this is how we invalidate the cache and protect ourselves from errors further down the stack, so if this fails we have to abort the transaction so we make sure we don't end up with stale free space cache. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:44 UTC
4d884fc Filipe Manana 09 February 2015, 17:17:43 UTC Btrfs: fix fsync race leading to ordered extent memory leaks We can have multiple fsync operations against the same file during the same transaction and they can collect the same ordered extents while they don't complete (still accessible from the inode's ordered tree). If this happens, those ordered extents will never get their reference counts decremented to 0, leading to memory leaks and inode leaks (an iput for an ordered extent's inode is scheduled only when the ordered extent's refcount drops to 0). The following sequence diagram explains this race: CPU 1 CPU 2 btrfs_sync_file() btrfs_sync_file() mutex_lock(inode->i_mutex) btrfs_log_inode() btrfs_get_logged_extents() --> collects ordered extent X --> increments ordered extent X's refcount btrfs_submit_logged_extents() mutex_unlock(inode->i_mutex) mutex_lock(inode->i_mutex) btrfs_sync_log() btrfs_wait_logged_extents() --> list_del_init(&ordered->log_list) btrfs_log_inode() btrfs_get_logged_extents() --> Adds ordered extent X to logged_list because at this point: list_empty(&ordered->log_list) && test_bit(BTRFS_ORDERED_LOGGED, &ordered->flags) == 0 --> Increments ordered extent X's refcount --> check if ordered extent's io is finished or not, start it if necessary and wait for it to finish --> sets bit BTRFS_ORDERED_LOGGED on ordered extent X's flags and adds it to trans->ordered btrfs_sync_log() finishes btrfs_submit_logged_extents() btrfs_log_inode() finishes mutex_unlock(inode->i_mutex) btrfs_sync_file() finishes btrfs_sync_log() btrfs_wait_logged_extents() --> Sees ordered extent X has the bit BTRFS_ORDERED_LOGGED set in its flags --> X's refcount is untouched btrfs_sync_log() finishes btrfs_sync_file() finishes btrfs_commit_transaction() --> called by transaction kthread for e.g. btrfs_wait_pending_ordered() --> waits for ordered extent X to complete --> decrements ordered extent X's refcount by 1 only, corresponding to the increment done by the fsync task ran by CPU 1 In the scenario of the above diagram, after the transaction commit, the ordered extent will remain with a refcount of 1 forever, leaking the ordered extent structure and preventing the i_count of its inode from ever decreasing to 0, since the delayed iput is scheduled only when the ordered extent's refcount drops to 0, preventing the inode from ever being evicted by the VFS. Fix this by using the flag BTRFS_ORDERED_LOGGED differently. Use it to mean that an ordered extent is already being processed by an fsync call, which will attach it to the current transaction, preventing it from being collected by subsequent fsync operations against the same inode. This race was introduced with the following change (added in 3.19 and backported to stable 3.18 and 3.17): Btrfs: make sure logged extents complete in the current transaction V3 commit 50d9aa99bd35c77200e0e3dd7a72274f8304701f I ran into this issue while running xfstests/generic/113 in a loop, which failed about 1 out of 10 runs with the following warning in dmesg: [ 2612.440038] WARNING: CPU: 4 PID: 22057 at fs/btrfs/disk-io.c:3558 free_fs_root+0x36/0x133 [btrfs]() [ 2612.442810] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop processor parport_pc parport psmouse therma l_sys i2c_piix4 serio_raw pcspkr evdev microcode button i2c_core ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic virtio_pci ata_piix virtio_ring libata virtio flo ppy e1000 scsi_mod [last unloaded: btrfs] [ 2612.452711] CPU: 4 PID: 22057 Comm: umount Tainted: G W 3.19.0-rc5-btrfs-next-4+ #1 [ 2612.454921] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 2612.457709] 0000000000000009 ffff8801342c3c78 ffffffff8142425e ffff88023ec8f2d8 [ 2612.459829] 0000000000000000 ffff8801342c3cb8 ffffffff81045308 ffff880046460000 [ 2612.461564] ffffffffa036da56 ffff88003d07b000 ffff880046460000 ffff880046460068 [ 2612.463163] Call Trace: [ 2612.463719] [<ffffffff8142425e>] dump_stack+0x4c/0x65 [ 2612.464789] [<ffffffff81045308>] warn_slowpath_common+0xa1/0xbb [ 2612.466026] [<ffffffffa036da56>] ? free_fs_root+0x36/0x133 [btrfs] [ 2612.467247] [<ffffffff810453c5>] warn_slowpath_null+0x1a/0x1c [ 2612.468416] [<ffffffffa036da56>] free_fs_root+0x36/0x133 [btrfs] [ 2612.469625] [<ffffffffa036f2a7>] btrfs_drop_and_free_fs_root+0x93/0x9b [btrfs] [ 2612.471251] [<ffffffffa036f353>] btrfs_free_fs_roots+0xa4/0xd6 [btrfs] [ 2612.472536] [<ffffffff8142612e>] ? wait_for_completion+0x24/0x26 [ 2612.473742] [<ffffffffa0370bbc>] close_ctree+0x1f3/0x33c [btrfs] [ 2612.475477] [<ffffffff81059d1d>] ? destroy_workqueue+0x148/0x1ba [ 2612.476695] [<ffffffffa034e3da>] btrfs_put_super+0x19/0x1b [btrfs] [ 2612.477911] [<ffffffff81153e53>] generic_shutdown_super+0x73/0xef [ 2612.479106] [<ffffffff811540e2>] kill_anon_super+0x13/0x1e [ 2612.480226] [<ffffffffa034e1e3>] btrfs_kill_super+0x17/0x23 [btrfs] [ 2612.481471] [<ffffffff81154307>] deactivate_locked_super+0x3b/0x50 [ 2612.482686] [<ffffffff811547a7>] deactivate_super+0x3f/0x43 [ 2612.483791] [<ffffffff8116b3ed>] cleanup_mnt+0x59/0x78 [ 2612.484842] [<ffffffff8116b44c>] __cleanup_mnt+0x12/0x14 [ 2612.485900] [<ffffffff8105d019>] task_work_run+0x8f/0xbc [ 2612.486960] [<ffffffff810028d8>] do_notify_resume+0x5a/0x6b [ 2612.488083] [<ffffffff81236e5b>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 2612.489333] [<ffffffff8142a17f>] int_signal+0x12/0x17 [ 2612.490353] ---[ end trace 54a960a6bdcb8d93 ]--- [ 2612.557253] VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds. Have a nice day... Kmemleak confirmed the ordered extent leak (and btrfs inode specific structures such as delayed nodes): $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff880154290db0 (size 576): comm "btrfsck", pid 21980, jiffies 4295542503 (age 1273.412s) hex dump (first 32 bytes): 01 40 00 00 01 00 00 00 b0 1d f1 4e 01 88 ff ff .@.........N.... 00 00 00 00 00 00 00 00 c8 0d 29 54 01 88 ff ff ..........)T.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff88014ef11db0 (size 576): comm "rm", pid 22009, jiffies 4295542593 (age 1273.052s) hex dump (first 32 bytes): 02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 c8 1d f1 4e 01 88 ff ff ...........N.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff8800336feda8 (size 584): comm "aio-stress", pid 22031, jiffies 4295543006 (age 1271.400s) hex dump (first 32 bytes): 00 40 3e 00 00 00 00 00 00 00 8f 42 00 00 00 00 .@>........B.... 00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 ................ backtrace: [<ffffffff8114eb34>] create_object+0x172/0x29a [<ffffffff8141d790>] kmemleak_alloc+0x25/0x41 [<ffffffff81141ae6>] kmemleak_alloc_recursive.constprop.52+0x16/0x18 [<ffffffff81145288>] kmem_cache_alloc+0xf7/0x198 [<ffffffffa0389243>] __btrfs_add_ordered_extent+0x43/0x309 [btrfs] [<ffffffffa038968b>] btrfs_add_ordered_extent_dio+0x12/0x14 [btrfs] [<ffffffffa03810e2>] btrfs_get_blocks_direct+0x3ef/0x571 [btrfs] [<ffffffff81181349>] do_blockdev_direct_IO+0x62a/0xb47 [<ffffffff8118189a>] __blockdev_direct_IO+0x34/0x36 [<ffffffffa03776e5>] btrfs_direct_IO+0x16a/0x1e8 [btrfs] [<ffffffff81100373>] generic_file_direct_write+0xb8/0x12d [<ffffffffa038615c>] btrfs_file_write_iter+0x24b/0x42f [btrfs] [<ffffffff8118bb0d>] aio_run_iocb+0x2b7/0x32e [<ffffffff8118c99a>] do_io_submit+0x26e/0x2ff [<ffffffff8118ca3b>] SyS_io_submit+0x10/0x12 [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 CC: <stable@vger.kernel.org> # 3.19, 3.18 and 3.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com> 02 March 2015, 22:04:44 UTC
f563db4 Radim Krčmář 27 February 2015, 15:32:38 UTC KVM: SVM: fix interrupt injection (apic->isr_count always 0) In commit b4eef9b36db4, we started to use hwapic_isr_update() != NULL instead of kvm_apic_vid_enabled(vcpu->kvm). This didn't work because SVM had it defined and "apicv" path in apic_{set,clear}_isr() does not change apic->isr_count, because it should always be 1. The initial value of apic->isr_count was based on kvm_apic_vid_enabled(vcpu->kvm), which is always 0 for SVM, so KVM could have injected interrupts when it shouldn't. Fix it by implicitly setting SVM's hwapic_isr_update to NULL and make the initial isr_count depend on hwapic_isr_update() for good measure. Fixes: b4eef9b36db4 ("kvm: x86: vmx: NULL out hwapic_isr_update() in case of !enable_apicv") Reported-and-tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 02 March 2015, 22:04:40 UTC
1a6f77a Linus Torvalds 02 March 2015, 22:03:27 UTC Merge tag 'md/4.0-fixes' of git://neil.brown.name/md Pull md fixes from Neil Brown: "Three md fixes: - fix a read-balance problem that was reported 2 years ago, but that I never noticed the report :-( - fix for rare RAID6 problem causing incorrect bitmap updates when two devices fail. - add __ATTR_PREALLOC annotation now that it is possible" * tag 'md/4.0-fixes' of git://neil.brown.name/md: md: mark some attributes as pre-alloc raid5: check faulty flag for array status during recovery. md/raid1: fix read balance when a drive is write-mostly. 02 March 2015, 22:03:27 UTC
49db1f0 Linus Torvalds 02 March 2015, 22:02:17 UTC Merge tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag fix from James Hogan: "This is just a single patch to fix the KSTK_EIP() and KSTK_ESP() macros for metag which have always been erronously returning the PC and stack pointer of the task's kernel context rather than from its user context saved at entry from userland into the kernel, which affects the contents of /proc/<pid>/maps and /proc/<pid>/stat" * tag 'metag-fixes-v4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: Fix KSTK_EIP() and KSTK_ESP() macros 02 March 2015, 22:02:17 UTC
dfcacc1 Rafael J. Wysocki 02 March 2015, 21:25:37 UTC cpuidle: Clean up fallback handling in cpuidle_idle_call() Move the fallback code path in cpuidle_idle_call() to the end of the function to avoid jumping to a label in an if () branch. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 02 March 2015, 21:25:37 UTC
eee617a David S. Miller 02 March 2015, 20:27:23 UTC Merge branch 'mlx4' Or Gerlitz says: ==================== Mellanox driver fixes Two small fixes, please apply to net. Both patches should go to 3.19.y too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2015, 20:27:23 UTC
1037ebb Ido Shamay 02 March 2015, 16:22:16 UTC net/mlx4_en: Disbale GRO for incoming loopback/selftest packets Packets which are sent from the selftest (ethtool) flow, should not be passed to GRO stack but rather dropped by the driver after validation. To achieve that, we disable GRO for the duration of the selftest. Fixes: dd65beac48a5 ("net/mlx4_en: Extend usage of napi_gro_frags") Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2015, 20:27:19 UTC
f5956fa Or Gerlitz 02 March 2015, 16:22:15 UTC net/mlx4_core: Fix wrong mask and error flow for the update-qp command The bit mask for currently supported driver features (MLX4_UPDATE_QP_SUPPORTED_ATTRS) of the update-qp command was defined twice (using enum value and pre-processor define directive) and wrong. The return value of the call to mlx4_update_qp() from within the SRIOV resource-tracker was wrongly voided down. Fix both issues. issue: none Fixes: 09e05c3f78e9 ('net/mlx4: Set vlan stripping policy by the right command') Fixes: ce8d9e0d6746 ('net/mlx4_core: Add UPDATE_QP SRIOV wrapper support') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 02 March 2015, 20:27:19 UTC
b6d1778 Geert Uytterhoeven 26 February 2015, 10:26:34 UTC dmaengine: shdma: Move DMA stop to (runtime) suspend callbacks During system reboot, the sh-dma-engine device may be runtime-suspended, causing a crash: Unhandled fault: imprecise external abort (0x1406) at 0x0002c02c Internal error: : 1406 [#1] SMP ARM ... PC is at sh_dmae_ctl_stop+0x28/0x64 LR is at sh_dmae_ctl_stop+0x24/0x64 If the sh-dma-engine is runtime-suspended, its module clock is turned off, and its registers cannot be accessed. To fix this, move the call to sh_dmae_ctl_stop(), which touches the DMAOR register, to the sh_dmae_suspend() and sh_dmae_runtime_suspend() callbacks. This makes PM operations more symmetric, as both sh_dmae_resume() and sh_dmae_runtime_resume() already call sh_dmae_rst() to re-initialize the DMAOR register. Remove sh_dmae_shutdown(), as it became empty. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> 02 March 2015, 16:40:44 UTC
d7a6fe0 Alexandre Belloni 06 January 2015, 11:14:32 UTC ASoC: sam9g20_wm8731: drop machine_is_xxx Atmel based boards can now only be used with device tree. Drop non DT initialization. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> 02 March 2015, 16:19:26 UTC
be482d6 Ingo Molnar 02 March 2015, 13:18:57 UTC Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: " - Fix regression in DMI sysfs code for handling "End of Table" entry and a type bug that could lead to integer overflow. (Ivan Khoronzhuk) - Fix boundary checking in efi_high_alloc() which can lead to memory corruption in the EFI boot stubs. (Yinghai Lu)" Signed-off-by: Ingo Molnar <mingo@kernel.org> 02 March 2015, 13:18:57 UTC
93c537a Lukasz Majewski 24 February 2015, 15:31:28 UTC MAINTAINERS: Add entry for SAMSUNG THERMAL DRIVER This patch adds entry for SAMSUNG THERMAL DRIVER in the MAINTAINERS file. It has been agreed, that pull request are going to be sent to Eduardo Valentin. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> 02 March 2015, 09:06:09 UTC
0fc8392 Lukasz Majewski 05 February 2015, 15:45:06 UTC cpufreq: exynos: Use simple approach to asses if cpu cooling can be used Commit: e725d26c4857e5e41975b5e74e64ce6ab09a7121 provided possibility to use device tree to asses if cpu can be used as cooling device. Since the code was somewhat awkward, simpler approach has been proposed. Test HW: Exynos 4412 - Odroid U3. Suggested-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> 02 March 2015, 09:04:52 UTC
42b696e Chanwoo Choi 24 February 2015, 04:56:54 UTC thermal: exynos: Fix wrong control of power down detection mode for Exynos7 This patch fixes the wrong control of PD_DET_EN (power down detection mode) for Exynos7 because exynos7_tmu_control() always enables the power down detection mode regardless 'on' parameter. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> 02 March 2015, 09:04:51 UTC
aa91def Nicolas PLANEL 01 March 2015, 18:47:22 UTC USB: ch341: set tty baud speed according to tty struct The ch341_set_baudrate() function initialize the device baud speed according to the value on priv->baud_rate. By default the ch341_open() set it to a hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the tty_struct is not initialized with the same default value. (usually 56700) This means that the tty_struct and the device baud rate generator are not synchronized after opening the port. Fixup is done by calling ch341_set_termios() if tty exist. Remove unnecessary variable priv->baud_rate setup as it's already done by ch341_port_probe(). Remove unnecessary call to ch341_set_{handshake,baudrate}() in ch341_open() as there already called in ch341_configure() and ch341_set_termios() Signed-off-by: Nicolas PLANEL <nicolas.planel@enovance.com> Signed-off-by: Johan Hovold <johan@kernel.org> 02 March 2015, 08:31:02 UTC
7c0af9f Trond Myklebust 26 February 2015, 17:54:46 UTC NFSv4: Don't call put_rpccred() under the rcu_read_lock() put_rpccred() can sleep. Fixes: 8f649c3762547 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Cc: stable@vger.kernel.org # 2.6.35+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 04:23:07 UTC
fa92336 Trond Myklebust 23 February 2015, 23:51:32 UTC NFS: Don't require a filehandle to refresh the inode in nfs_prime_dcache() If the server does not return a valid set of attributes that we can use to either create a file or refresh the inode, then there is no value in calling nfs_prime_dcache(). However if we're just refreshing the inode using the attributes that the server returned, then it shouldn't matter whether or not we have a filehandle, as long as we check the fsid+fileid combination. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 04:23:07 UTC
1ae04b2 Trond Myklebust 23 February 2015, 21:15:00 UTC NFSv3: Use the readdir fileid as the mounted-on-fileid When we call readdirplus, set the fileid normally returned by readdir as the mounted-on-fileid, since that is commonly the case if there is a mountpoint. To ensure that we get it right, we only set the flag if the readdir fileid differs from the one returned in the readdirplus attributes. This again means that we can avoid the issues described in commit 2ef47eb1aee17 ("NFS: Fix use of nfs_attr_use_mounted_on_fileid()"), which only fixed NFSv4. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 04:23:07 UTC
6c441c2 Trond Myklebust 22 February 2015, 21:35:36 UTC NFS: Don't invalidate a submounted dentry in nfs_prime_dcache() If we're traversing a directory which contains a submounted filesystem, or one that has a referral, the NFS server that is processing the READDIR request will often return information for the underlying (mounted-on) directory. It may, or may not, also return filehandle information. If this happens, and the lookup in nfs_prime_dcache() returns the dentry for the submounted directory, the filehandle comparison will fail, and we call d_invalidate(). Post-commit 8ed936b5671bf ("vfs: Lazily remove mounts on unlinked files and directories."), this means the entire subtree is unmounted. The following minimal patch addresses this problem by punting on the invalidation if there is a submount. Kudos to Neil Brown <neilb@suse.de> for having tracked down this issue (see link). Reported-by: Nix <nix@esperi.org.uk> Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nix Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> 02 March 2015, 04:23:06 UTC
3235b40 Trond Myklebust 27 February 2015, 00:52:06 UTC NFSv4: Set a barrier in the update_changeattr() helper Ensure that we don't regress the changes that were made to the directory. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Tested-by: Chuck Lever <chuck.lever@oracle.com> 02 March 2015, 04:23:06 UTC
back to top