Revision a053477b7c6e5094247986de3aa2f0aa139cbb42 authored by Victor Kamensky on 23 March 2018, 18:26:45 UTC, committed by Michael Roth on 21 June 2018, 01:45:00 UTC
In OE project 4.15 linux kernel boot hang was observed under single cpu aarch64 qemu. Kernel code was in a loop waiting for vtimer arrival, spinning in TC generated blocks, while interrupt was pending unprocessed. This happened because when qemu tried to handle vtimer interrupt target had interrupts disabled, as result flag indicating TCG exit, cpu->icount_decr.u16.high, was cleared but arm_cpu_exec_interrupt function did not call arm_cpu_do_interrupt to process interrupt. Later when target reenabled interrupts, it happened without exit into main loop, so following code that waited for result of interrupt execution run in infinite loop. To solve the problem instructions that operate on CPU sys state (i.e enable/disable interrupt), and marked as DISAS_UPDATE, should be considered as DISAS_EXIT variant, and should be forced to exit back to main loop so qemu will have a chance processing pending CPU state updates, including pending interrupts. This change brings consistency with how DISAS_UPDATE is treated in aarch32 case. CC: Peter Maydell <peter.maydell@linaro.org> CC: Alex Bennée <alex.bennee@linaro.org> CC: qemu-stable@nongnu.org Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1521526368-1996-1-git-send-email-kamensky@cisco.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit a75a52d62418dafe462be4fe30485501d1010bb9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
1 parent 7c22c5a
Makefile.objs
#######################################################################
# Common libraries for tools and emulators
stub-obj-y = stubs/ crypto/
util-obj-y = util/ qobject/ qapi/
util-obj-y += qmp-introspect.o qapi-types.o qapi-visit.o qapi-event.o
chardev-obj-y = chardev/
#######################################################################
# block-obj-y is code used by both qemu system emulation and qemu-img
block-obj-y += nbd/
block-obj-y += block.o blockjob.o
block-obj-y += block/ scsi/
block-obj-y += qemu-io-cmds.o
block-obj-$(CONFIG_REPLICATION) += replication.o
block-obj-m = block/
#######################################################################
# crypto-obj-y is code used by both qemu system emulation and qemu-img
crypto-obj-y = crypto/
crypto-aes-obj-y = crypto/
#######################################################################
# qom-obj-y is code used by both qemu system emulation and qemu-img
qom-obj-y = qom/
#######################################################################
# io-obj-y is code used by both qemu system emulation and qemu-img
io-obj-y = io/
######################################################################
# Target independent part of system emulation. The long term path is to
# suppress *all* target specific code in case of system emulation, i.e. a
# single QEMU executable should support all CPUs and machines.
ifeq ($(CONFIG_SOFTMMU),y)
common-obj-y = blockdev.o blockdev-nbd.o block/
common-obj-y += bootdevice.o iothread.o
common-obj-y += net/
common-obj-y += qdev-monitor.o device-hotplug.o
common-obj-$(CONFIG_WIN32) += os-win32.o
common-obj-$(CONFIG_POSIX) += os-posix.o
common-obj-$(CONFIG_LINUX) += fsdev/
common-obj-y += migration/
common-obj-y += audio/
common-obj-y += hw/
common-obj-y += replay/
common-obj-y += ui/
common-obj-y += bt-host.o bt-vhci.o
bt-host.o-cflags := $(BLUEZ_CFLAGS)
common-obj-y += dma-helpers.o
common-obj-y += vl.o
vl.o-cflags := $(GPROF_CFLAGS) $(SDL_CFLAGS)
common-obj-$(CONFIG_TPM) += tpm.o
common-obj-$(CONFIG_SLIRP) += slirp/
common-obj-y += backends/
common-obj-y += chardev/
common-obj-$(CONFIG_SECCOMP) += qemu-seccomp.o
qemu-seccomp.o-cflags := $(SECCOMP_CFLAGS)
qemu-seccomp.o-libs := $(SECCOMP_LIBS)
common-obj-$(CONFIG_FDT) += device_tree.o
######################################################################
# qapi
common-obj-y += qmp-marshal.o
common-obj-y += qmp-introspect.o
common-obj-y += qmp.o hmp.o
endif
#######################################################################
# Target-independent parts used in system and user emulation
common-obj-y += cpus-common.o
common-obj-y += hw/
common-obj-y += qom/
common-obj-y += disas/
######################################################################
# Resource file for Windows executables
version-obj-$(CONFIG_WIN32) += $(BUILD_DIR)/version.o
######################################################################
# tracing
util-obj-y += trace/
target-obj-y += trace/
######################################################################
# guest agent
# FIXME: a few definitions from qapi-types.o/qapi-visit.o are needed
# by libqemuutil.a. These should be moved to a separate .json schema.
qga-obj-y = qga/
qga-vss-dll-obj-y = qga/
######################################################################
# contrib
ivshmem-client-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-client/
ivshmem-server-obj-$(CONFIG_IVSHMEM) = contrib/ivshmem-server/
libvhost-user-obj-y = contrib/libvhost-user/
vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
######################################################################
trace-events-subdirs =
trace-events-subdirs += util
trace-events-subdirs += crypto
trace-events-subdirs += io
trace-events-subdirs += migration
trace-events-subdirs += block
trace-events-subdirs += chardev
trace-events-subdirs += hw/block
trace-events-subdirs += hw/block/dataplane
trace-events-subdirs += hw/char
trace-events-subdirs += hw/intc
trace-events-subdirs += hw/net
trace-events-subdirs += hw/virtio
trace-events-subdirs += hw/audio
trace-events-subdirs += hw/misc
trace-events-subdirs += hw/usb
trace-events-subdirs += hw/scsi
trace-events-subdirs += hw/nvram
trace-events-subdirs += hw/display
trace-events-subdirs += hw/input
trace-events-subdirs += hw/timer
trace-events-subdirs += hw/dma
trace-events-subdirs += hw/sparc
trace-events-subdirs += hw/sd
trace-events-subdirs += hw/isa
trace-events-subdirs += hw/mem
trace-events-subdirs += hw/i386
trace-events-subdirs += hw/i386/xen
trace-events-subdirs += hw/9pfs
trace-events-subdirs += hw/ppc
trace-events-subdirs += hw/pci
trace-events-subdirs += hw/s390x
trace-events-subdirs += hw/vfio
trace-events-subdirs += hw/acpi
trace-events-subdirs += hw/arm
trace-events-subdirs += hw/alpha
trace-events-subdirs += hw/xen
trace-events-subdirs += hw/ide
trace-events-subdirs += ui
trace-events-subdirs += audio
trace-events-subdirs += net
trace-events-subdirs += target/arm
trace-events-subdirs += target/i386
trace-events-subdirs += target/mips
trace-events-subdirs += target/sparc
trace-events-subdirs += target/s390x
trace-events-subdirs += target/ppc
trace-events-subdirs += qom
trace-events-subdirs += linux-user
trace-events-subdirs += qapi
trace-events-subdirs += accel/tcg
trace-events-subdirs += accel/kvm
trace-events-subdirs += nbd
trace-events-subdirs += scsi
trace-events-files = $(SRC_PATH)/trace-events $(trace-events-subdirs:%=$(SRC_PATH)/%/trace-events)
trace-obj-y = trace-root.o
trace-obj-y += $(trace-events-subdirs:%=%/trace.o)
trace-obj-$(CONFIG_TRACE_UST) += trace-ust-all.o
trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace-root.o
trace-obj-$(CONFIG_TRACE_DTRACE) += $(trace-events-subdirs:%=%/trace-dtrace.o)
Computing file changes ...