Revision a34ff20549a8d87fc88b4dfaa87d5b1f0fd5298a authored by Shuhei Kadowaki on 22 June 2023, 06:15:33 UTC, committed by GitHub on 22 June 2023, 06:15:33 UTC
Code analysis tools such as JET.jl use `Meta.parse` to get a Julia code representation from textual data, or to display diagnostic messages when the input data is invalid. In such scenario it would be beneficial if these diagnostic messages could refer to the original file name of the input data. This commit allows `Meta.parse` to accept the optional `filename::AbstractString` argument for this purpose. If an error occurs, the `filename` can be included in the diagnostic information. The default value is set to `"none"`, thus preserving existing behavior.
1 parent fbb8d6c
Make.inc
# -*- mode: makefile -*-
# vi:syntax=make
## Note:
## It is generally preferable to change these options, for
## your local machine, in a file named `Make.user` in the toplevel
## and build directories
##
## For developers, take care to not insert comments on the same line as
## variable declarations. The spaces between the variable value and the
## comment will be included in the value.
# Julia precompilation options
# Set to zero to turn off extra precompile (e.g. for the REPL)
JULIA_PRECOMPILE ?= 1
# Set FORCE_ASSERTIONS to 1 to enable assertions in the C and C++ portions
# of the Julia code base. You may also want to set LLVM_ASSERTIONS to 1,
# which will enable assertions in LLVM.
# An "assert build" of Julia is a build that has both FORCE_ASSERTIONS=1
# and LLVM_ASSERTIONS=1.
FORCE_ASSERTIONS ?= 0
# Set BOOTSTRAP_DEBUG_LEVEL to 1 to enable Julia-level stacktrace during bootstrapping.
BOOTSTRAP_DEBUG_LEVEL ?= 0
# OPENBLAS build options
OPENBLAS_TARGET_ARCH:=
OPENBLAS_SYMBOLSUFFIX:=
OPENBLAS_LIBNAMESUFFIX:=
# If OPENBLAS_TARGET_ARCH is set, we default to disabling OPENBLAS_DYNAMIC_ARCH
ifneq ($(OPENBLAS_TARGET_ARCH),)
OPENBLAS_DYNAMIC_ARCH:=0
else
OPENBLAS_DYNAMIC_ARCH:=1
endif
OPENBLAS_USE_THREAD:=1
# Flags for using libraries available on the system instead of building them.
# Please read the notes around usage of SYSTEM flags in README.md
# Issues resulting from use of SYSTEM versions will generally not be accepted.
USE_SYSTEM_CSL:=0
USE_SYSTEM_LLVM:=0
USE_SYSTEM_LIBUNWIND:=0
DISABLE_LIBUNWIND:=0
USE_SYSTEM_PCRE:=0
USE_SYSTEM_LIBM:=0
USE_SYSTEM_OPENLIBM:=0
UNTRUSTED_SYSTEM_LIBM:=0
USE_SYSTEM_DSFMT:=0
USE_SYSTEM_LIBBLASTRAMPOLINE:=0
USE_SYSTEM_BLAS:=0
USE_SYSTEM_LAPACK:=0
USE_SYSTEM_GMP:=0
USE_SYSTEM_MPFR:=0
USE_SYSTEM_LIBSUITESPARSE:=0
USE_SYSTEM_LIBUV:=0
USE_SYSTEM_UTF8PROC:=0
USE_SYSTEM_MBEDTLS:=0
USE_SYSTEM_LIBSSH2:=0
USE_SYSTEM_NGHTTP2:=0
USE_SYSTEM_CURL:=0
USE_SYSTEM_LIBGIT2:=0
USE_SYSTEM_PATCHELF:=0
USE_SYSTEM_LIBWHICH:=0
USE_SYSTEM_ZLIB:=0
USE_SYSTEM_P7ZIP:=0
USE_SYSTEM_LLD:=0
# Link to the LLVM shared library
USE_LLVM_SHLIB := 1
# Enable threading with one thread
JULIA_THREADS := 1
# Set to 1 to enable profiling with OProfile
USE_OPROFILE_JITEVENTS ?= 0
# USE_PERF_JITEVENTS, and USE_INTEL_JITEVENTS defined below since default is OS specific
# assume we don't have LIBSSP support in our compiler, will enable later if likely true
HAVE_SSP := 0
# GC debugging options
WITH_GC_VERIFY := 0
WITH_GC_DEBUG_ENV := 0
# Enable DTrace support
WITH_DTRACE := 0
# Enable ITTAPI integration
WITH_ITTAPI := 0
# Enable Tracy support
WITH_TRACY := 0
WITH_TRACY_CALLSTACKS := 0
# Enable Timing Counts support
WITH_TIMING_COUNTS := 0
# Prevent picking up $ARCH from the environment variables
ARCH:=
# Literal values that are hard to use in Makefiles otherwise:
define newline # a literal \n
endef
COMMA:=,
SPACE:=$(eval) $(eval)
# force a sane / stable configuration
export LC_ALL=C
export LANG=C
# We need python for things like BB triplet recognition and relative path computation.
# We don't really care about version, generally, so just find something that works:
PYTHON := "$(shell which python 2>/dev/null || which python3 2>/dev/null || which python2 2>/dev/null || echo "{python|python3|python2} not found")"
PYTHON_SYSTEM := $(shell $(PYTHON) -c 'from __future__ import print_function; import platform; print(platform.system())')
# If we're running on Cygwin, but using a native-windows Python, we need to use cygpath -w
ifneq ($(and $(filter $(PYTHON_SYSTEM),Windows),$(findstring CYGWIN,$(shell uname))),)
python_cygpath = `cygpath -w $(1)`
else
python_cygpath = $(1)
endif
# Get a relative path easily
define rel_path
$(shell $(PYTHON) $(call python_cygpath,$(JULIAHOME)/contrib/relative_path.py) $(call python_cygpath,$(1)) $(call python_cygpath,$(2)))
endef
# pick up BUILDROOT from O= if it isn't already set (from recursive make)
ifeq ($(BUILDROOT),)
ifeq ("$(origin O)", "command line")
BUILDROOT := $(abspath $O)
BUILDDIR := $(abspath $(BUILDROOT)/$(call rel_path,$(JULIAHOME),$(SRCDIR)))
$(info $(shell printf '\033[32;1mBuilding into $(BUILDROOT)\033[0m')) # use printf to expand the escape sequences
else
BUILDROOT:=$(JULIAHOME)
endif
endif
export BUILDROOT
unexport O
# we include twice to pickup user definitions better
# include from JULIAHOME first so that BUILDROOT can override
MAYBE_HOST :=
ifneq ($(BUILDING_HOST_TOOLS),1)
MAKE_USER_FNAME = Make.user
else
MAYBE_HOST := /host
MAKE_USER_FNAME = Make.host.user
endif
ifeq (exists, $(shell [ -e $(JULIAHOME)/$(MAKE_USER_FNAME) ] && echo exists ))
include $(JULIAHOME)/$(MAKE_USER_FNAME)
endif
ifeq (exists, $(shell [ -e $(BUILDROOT)/$(MAKE_USER_FNAME) ] && echo exists ))
include $(BUILDROOT)/$(MAKE_USER_FNAME)
endif
# disable automatic Makefile rules
.SUFFIXES:
# find out if git repository is available
ifeq ($(shell [ -e $(JULIAHOME)/.git ] && echo true || echo "Warning: git information unavailable; versioning information limited" >&2), true)
NO_GIT := 0
else
NO_GIT := 1
endif
# Julia's Semantic Versioning system labels the three decimal places in a version number as
# the major, minor and patch versions. Typically the major version would be incremented
# whenever a backwards-incompatible change is made, the minor version would be incremented
# whenever major backwards-compatible changes are made, and the patch version would be
# incremented whenever smaller changes are made. However, before v1.0.0, the major
# version number is always zero and the meanings shift down a place; the minor version
# number becomes the major version number, the patch version number becomes the minor
# version number, and there is no patch version number to speak of. In this case, the
# version v0.4.1 has backwards-compatible changes as compared to v0.4.0, and the
# version v0.5.0 has major backwards-incompatible changes as compared to v0.4.X.
JULIA_VERSION := $(shell cat $(JULIAHOME)/VERSION)
JULIA_MAJOR_VERSION := $(shell echo $(JULIA_VERSION) | cut -d'-' -f 1 | cut -d'.' -f 1)
JULIA_MINOR_VERSION := $(shell echo $(JULIA_VERSION) | cut -d'-' -f 1 | cut -d'.' -f 2)
JULIA_PATCH_VERSION := $(shell echo $(JULIA_VERSION) | cut -d'-' -f 1 | cut -d'+' -f 1 | cut -d'.' -f 3)
# libjulia's SONAME will follow the format libjulia.so.$(SOMAJOR). Before v1.0.0,
# SOMAJOR will be a two-decimal value, e.g. libjulia.so.0.5, whereas at and beyond
# v1.0.0, SOMAJOR will be simply the major version number, e.g. libjulia.so.1
# The file itself will ultimately symlink to libjulia.so.$(SOMAJOR).$(SOMINOR)
ifeq ($(JULIA_MAJOR_VERSION),0)
SOMAJOR := $(JULIA_MAJOR_VERSION).$(JULIA_MINOR_VERSION)
SOMINOR := $(JULIA_PATCH_VERSION)
else
SOMAJOR := $(JULIA_MAJOR_VERSION)
SOMINOR := $(JULIA_MINOR_VERSION)
endif
ifneq ($(NO_GIT), 1)
JULIA_COMMIT := $(shell git -C $(JULIAHOME) rev-parse --short=10 HEAD)
else
JULIA_COMMIT := $(JULIA_VERSION)
endif
# Override `JULIA_COMMIT` to `JULIA_VERSION` if we're on a tagged commit
ifeq ($(shell git -C $(JULIAHOME) describe --tags --exact-match > /dev/null 2>&1 && echo true),true)
JULIA_COMMIT := $(JULIA_VERSION)
endif
# Whether to use GPL libraries or not.
USE_GPL_LIBS ?= 1
# Whether to install Julia as a framework on Darwin (Apple) platforms.
DARWIN_FRAMEWORK ?= 0
# Override in Make.user to customize the framework:
FRAMEWORK_NAME ?= Julia
FRAMEWORK_VERSION ?= $(JULIA_MAJOR_VERSION).$(JULIA_MINOR_VERSION)
# The prefix for all code sign identifiers.
DARWIN_CODESIGN_ID_BASE ?= org.julialang.julia
# The codesign id for the ui/repl (also embedded in Info.plist).
darwin_codesign_id_julia_ui := $(DARWIN_CODESIGN_ID_BASE).ui
# The prefix for all deps.
darwin_codesign_id_julia_deps := $(DARWIN_CODESIGN_ID_BASE).deps
# Directories and file structure of a Darwin framework:
framework_directory:=$(FRAMEWORK_NAME).framework
framework_versions:=$(framework_directory)/Versions
framework_currver:=$(framework_versions)/$(FRAMEWORK_VERSION)
framework_dylib:=$(framework_currver)/$(FRAMEWORK_NAME)
framework_headers:=$(framework_currver)/Headers
framework_documentation:=$(framework_currver)/Documentation
framework_resources:=$(framework_currver)/Resources
framework_frameworks:=$(framework_currver)/Frameworks
framework_modules:=$(framework_currver)/Modules
framework_helpers:=$(framework_currver)/Helpers
framework_infoplist:=$(framework_resources)/Info.plist
# Directories where said libraries get installed to
prefix ?= $(BUILDROOT)/julia-$(JULIA_COMMIT)
ifeq ($(DARWIN_FRAMEWORK), 1)
bindir := $(prefix)/$(framework_helpers)
libdir := $(prefix)/$(framework_currver)
libexecdir := $(prefix)/$(framework_helpers)
datarootdir := $(prefix)/$(framework_resources)
docdir := $(prefix)/$(framework_documentation)
mandir := $(datarootdir)/man
man1dir := $(mandir)/man1
includedir := $(prefix)/$(framework_headers)
sysconfdir := $(prefix)/$(framework_resources)
else
bindir := $(prefix)/bin
libdir := $(prefix)/lib
libexecdir := $(prefix)/libexec
datarootdir := $(prefix)/share
docdir := $(datarootdir)/doc/julia
mandir := $(datarootdir)/man
man1dir := $(mandir)/man1
includedir := $(prefix)/include
sysconfdir := $(prefix)/etc
endif
# Directories where things get built into
build_prefix := $(BUILDROOT)/usr$(MAYBE_HOST)
ifeq ($(BUILDING_HOST_TOOLS), 1)
build_staging := $(BUILDROOT)/usr-host-staging
else
build_staging := $(build_prefix)-staging
endif
build_bindir := $(build_prefix)/bin
build_depsbindir := $(build_prefix)/tools
build_libdir := $(build_prefix)/lib
build_libexecdir := $(build_prefix)/libexec
build_datarootdir := $(build_prefix)/share
build_mandir := $(build_datarootdir)/man
build_man1dir := $(build_mandir)/man1
build_includedir := $(build_prefix)/include
build_sysconfdir := $(build_prefix)/etc
# This used for debian packaging, to conform to library layout guidelines
ifeq ($(MULTIARCH_INSTALL), 1)
MULTIARCH := $(shell gcc -print-multiarch)
libdir := $(prefix)/lib/$(MULTIARCH)
build_libdir := $(build_prefix)/lib/$(MULTIARCH)
endif
# Private library directories
ifeq ($(DARWIN_FRAMEWORK), 1)
private_libdir := $(prefix)/$(framework_frameworks)
else
private_libdir := $(libdir)/julia
endif
build_private_libdir := $(build_libdir)/julia
private_libexecdir := $(libexecdir)/julia
build_private_libexecdir := $(build_libexecdir)/julia
# A helper functions for dealing with lazily-evaluated, expensive operations.. Spinning
# up a python process to, for exaxmple, parse a TOML file is expensive, and we must wait
# until the TOML files are on-disk before we can parse them. This means that we cannot
# use `:=` (since we do not want to evaluate these rules now, we want to evaluate them
# when we use them, so we use `=`) however we also do not want to re-evaluate them
# multiple times. So we define a caching mechanism where the rules are still lazily
# evaluated, but we cache the value such that the second time around we don't have to
# re-evaluate them. Usage example:
#
# EXPENSIVE_OPERATION = $(shell prog args...)
# CACHED_RESULT = $(call hit_cache,EXPENSIVE_OPERATION)
#
# The first time you use `$(CACHED_RESULT)`, it will invoke `$(EXPENSIVE_OPERATION)`,
# but after that point, it will not, unless `$(EXPENSIVE_OPERATION)` evaluated to the
# empty string, in which case it will be re-evaluated.
define hit_cache
$(if $(_CACHE-$(1)),,$(eval _CACHE-$(1) := $($(1))))$(_CACHE-$(1))
endef
# Calculate relative paths to libdir, private_libdir, datarootdir, and sysconfdir
define cache_rel_path
$(1)_rel_eval = $(call rel_path,$(2),$($(1)))
$(1)_rel = $$(call hit_cache,$(1)_rel_eval)
endef
$(foreach D,libdir private_libdir datarootdir libexecdir private_libexecdir docdir sysconfdir includedir,$(eval $(call cache_rel_path,$(D),$(bindir))))
$(foreach D,build_libdir build_private_libdir,$(eval $(call cache_rel_path,$(D),$(build_bindir))))
# Save a special one: reverse_private_libdir_rel: usually just `../`, but good to be general:
reverse_private_libdir_rel_eval = $(call rel_path,$(private_libdir),$(libdir))
reverse_private_libdir_rel = $(call hit_cache,reverse_private_libdir_rel_eval)
INSTALL_F := $(JULIAHOME)/contrib/install.sh 644
INSTALL_M := $(JULIAHOME)/contrib/install.sh 755
# LLVM Options
LLVMROOT := $(build_prefix)
# Set LLVM_ASSERTIONS to 1 to enable assertions in LLVM.
LLVM_ASSERTIONS := 0
LLVM_DEBUG := 0
# set to 1 to get clang and compiler-rt
BUILD_LLVM_CLANG := 0
# set to 1 to get lldb (often does not work, no chance with llvm3.2 and earlier)
# see http://lldb.llvm.org/build.html for dependencies
BUILD_LLDB := 0
BUILD_LIBCXX := 0
BUILD_LLD := 1
# Options to enable Polly and its code-generation options
USE_POLLY := 0
USE_POLLY_OPENMP := 0 # Enable OpenMP code-generation
USE_POLLY_ACC := 0 # Enable GPU code-generation
# Options to use MLIR
USE_MLIR := 0
# Options to use RegionVectorizer
USE_RV := 0
# Cross-compile
#XC_HOST := i686-w64-mingw32
#XC_HOST := x86_64-w64-mingw32
# Path to cmake (override in Make.user if needed)
CMAKE ?= cmake
CMAKE_GENERATOR ?= make
# Point pkg-config to only look at our libraries, overriding whatever
# the user may have unwittingly set. To pass PKG_CONFIG_* variables
# through to the buildsystem, these must be set either on the command
# line, or through `override` directives within Make.user
export PKG_CONFIG_PATH = $(JULIAHOME)/usr/lib/pkgconfig
export PKG_CONFIG_LIBDIR = $(JULIAHOME)/usr/lib/pkgconfig
# Figure out OS and architecture
BUILD_OS := $(shell uname)
ifneq (,$(findstring CYGWIN,$(BUILD_OS)))
XC_HOST ?= $(shell uname -m)-w64-mingw32
endif
ifeq ($(XC_HOST),)
CROSS_COMPILE:=
# delayed expansion of $(CC), since it won't be computed until later
HOSTCC = $(CC)
HOSTCXX = $(CXX)
else
HOSTCC ?= gcc
HOSTCXX ?= g++
OPENBLAS_DYNAMIC_ARCH := 1
override CROSS_COMPILE:=$(XC_HOST)-
ifneq (,$(findstring mingw,$(XC_HOST)))
override OS := WINNT
else ifneq (,$(findstring emscripten,$(XC_HOST)))
override OS := emscripten
override CROSS_COMPILE:=
else
ifeq (,$(OS))
$(error "unknown XC_HOST variable set, please set OS")
endif
endif
endif
JLDOWNLOAD := $(JULIAHOME)/deps/tools/jldownload
JLCHECKSUM := $(JULIAHOME)/deps/tools/jlchecksum
# Figure out OS and architecture
OS := $(BUILD_OS)
ifneq (,$(findstring MINGW,$(OS)))
override OS := WINNT
endif
ifneq (,$(findstring MINGW,$(BUILD_OS)))
override BUILD_OS := WINNT
endif
ifneq (,$(findstring MSYS,$(OS)))
override OS := WINNT
endif
ifneq (,$(findstring MSYS,$(BUILD_OS)))
override BUILD_OS := WINNT
endif
ifeq ($(BUILD_OS), WINNT)
BUILD_EXE := .exe
else ifneq (,$(findstring CYGWIN,$(BUILD_OS)))
BUILD_EXE := .exe
else
BUILD_EXE :=
endif
ifeq ($(OS), WINNT)
fPIC :=
EXE := .exe
else
fPIC := -fPIC
EXE :=
endif
# Set to 1 to enable profiling with perf
ifeq ("$(OS)", "Linux")
USE_PERF_JITEVENTS ?= 1
USE_INTEL_JITEVENTS ?= 1
else
USE_PERF_JITEVENTS ?= 0
USE_INTEL_JITEVENTS ?= 0
endif
JULIACODEGEN := LLVM
# flag for disabling assertions
ifeq ($(FORCE_ASSERTIONS), 1)
# C++ code needs to include LLVM header with the same assertion flag as LLVM
# Use this flag to re-enable assertion in our code after all the LLVM headers are included
CXX_DISABLE_ASSERTION := -DJL_VERIFY_PASSES
DISABLE_ASSERTIONS := -DJL_VERIFY_PASSES
else
CXX_DISABLE_ASSERTION := -DJL_NDEBUG
DISABLE_ASSERTIONS := -DNDEBUG -DJL_NDEBUG
endif
# Compiler specific stuff
ifeq (default,$(origin CC))
CC := $(CROSS_COMPILE)$(CC) # attempt to add cross-compiler prefix, if the user
# is not overriding the default, to form target-triple-cc (which
# may not exist), and use that to decide what compiler the user
# is using for the target build (or default to gcc)
endif
CC_VERSION_STRING = $(shell $(CC) --version 2>/dev/null)
ifneq (,$(findstring clang,$(CC_VERSION_STRING)))
USECLANG := 1
USEGCC := 0
else
USECLANG := 0
USEGCC := 1
endif
FC := $(CROSS_COMPILE)gfortran
# Note: Supporting only macOS Yosemite and above
ifeq ($(OS), Darwin)
APPLE_ARCH := $(shell uname -m)
ifneq ($(APPLE_ARCH),arm64)
MACOSX_VERSION_MIN := 10.14
else
MACOSX_VERSION_MIN := 11.0
endif
endif
JCFLAGS_COMMON := -std=gnu11 -pipe $(fPIC) -fno-strict-aliasing -D_FILE_OFFSET_BITS=64
JCFLAGS_CLANG := $(JCFLAGS_COMMON)
JCFLAGS_GCC := $(JCFLAGS_COMMON)
# AArch64 needs this flag to generate the .eh_frame used by libunwind
JCPPFLAGS_COMMON := -fasynchronous-unwind-tables
JCPPFLAGS_CLANG := $(JCPPFLAGS_COMMON)
JCPPFLAGS_GCC := $(JCPPFLAGS_COMMON)
JCXXFLAGS_COMMON := -pipe $(fPIC) -fno-rtti -std=c++14
JCXXFLAGS_CLANG := $(JCXXFLAGS_COMMON) -pedantic
JCXXFLAGS_GCC := $(JCXXFLAGS_COMMON)
DEBUGFLAGS_COMMON := -O0 -DJL_DEBUG_BUILD -fstack-protector
DEBUGFLAGS_CLANG := $(DEBUGFLAGS_COMMON) -g
DEBUGFLAGS_GCC := $(DEBUGFLAGS_COMMON) -ggdb2
SHIPFLAGS_COMMON := -O3
SHIPFLAGS_CLANG := $(SHIPFLAGS_COMMON) -g
SHIPFLAGS_GCC := $(SHIPFLAGS_COMMON) -ggdb2 -falign-functions
ifeq ($(OS), Darwin)
JCPPFLAGS_CLANG += -D_LARGEFILE_SOURCE -D_DARWIN_USE_64_BIT_INODE=1
endif
ifneq ($(OS), WINNT)
# Do not enable on windows to avoid warnings from libuv.
JCXXFLAGS_GCC += -pedantic
endif
ifeq ($(USEGCC),1)
CC := $(CROSS_COMPILE)gcc
CXX := $(CROSS_COMPILE)g++
JCFLAGS := $(JCFLAGS_GCC)
JCPPFLAGS := $(JCPPFLAGS_GCC)
JCXXFLAGS := $(JCXXFLAGS_GCC)
DEBUGFLAGS := $(DEBUGFLAGS_GCC)
SHIPFLAGS := $(SHIPFLAGS_GCC)
endif
ifeq ($(USECLANG),1)
CC := $(CROSS_COMPILE)clang
CXX := $(CROSS_COMPILE)clang++
JCFLAGS := $(JCFLAGS_CLANG)
JCPPFLAGS := $(JCPPFLAGS_CLANG)
JCXXFLAGS := $(JCXXFLAGS_CLANG)
DEBUGFLAGS := $(DEBUGFLAGS_CLANG)
SHIPFLAGS := $(SHIPFLAGS_CLANG)
ifeq ($(OS), Darwin)
CC += -mmacosx-version-min=$(MACOSX_VERSION_MIN)
CXX += -mmacosx-version-min=$(MACOSX_VERSION_MIN)
FC += -mmacosx-version-min=$(MACOSX_VERSION_MIN)
# export MACOSX_DEPLOYMENT_TARGET so that ld picks it up, especially for deps
export MACOSX_DEPLOYMENT_TARGET=$(MACOSX_VERSION_MIN)
endif
endif
JLDFLAGS :=
ifeq ($(USECCACHE), 1)
# Expand CC, CXX and FC here already because we want the original definition and not the ccache version.
CC_ARG := $(CC)
CXX_ARG := $(CXX)
FC_ARG := $(FC)
# Expand CC, CXX and FC here already to avoid recursive referencing.
CC_FULL := ccache $(CC)
CXX_FULL := ccache $(CXX)
FC_FULL := ccache $(FC)
# Add an extra indirection to make CC/CXX/FC non-simple vars
# (because of how -m$(BINARY) is added later on).
CC := $(CC_FULL)
CXX := $(CXX_FULL)
FC := $(FC_FULL)
CC_BASE := ccache
CXX_BASE := ccache
FC_BASE := ccache
ifeq ($(USECLANG),1)
# ccache and Clang don't do well together
# http://petereisentraut.blogspot.be/2011/05/ccache-and-clang.html
CC += -Qunused-arguments
CXX += -Qunused-arguments
# http://petereisentraut.blogspot.be/2011/09/ccache-and-clang-part-2.html
export CCACHE_CPP2 := yes
endif
else #USECCACHE
CC_BASE := $(shell echo $(CC) | cut -d' ' -f1)
CC_ARG := $(shell echo $(CC) | cut -s -d' ' -f2-)
CXX_BASE := $(shell echo $(CXX) | cut -d' ' -f1)
CXX_ARG := $(shell echo $(CXX) | cut -s -d' ' -f2-)
FC_BASE := $(shell echo $(FC) 2>/dev/null | cut -d' ' -f1)
FC_ARG := $(shell echo $(FC) 2>/dev/null | cut -s -d' ' -f2-)
endif
JFFLAGS := -O2 $(fPIC)
CPP := $(CC) -E
AR := $(CROSS_COMPILE)ar
AS := $(CROSS_COMPILE)as
LD := $(CROSS_COMPILE)ld
RANLIB := $(CROSS_COMPILE)ranlib
OBJCOPY := $(CROSS_COMPILE)objcopy
CPP_STDOUT := $(CPP) -P
# file extensions
ifeq ($(OS), WINNT)
SHLIB_EXT := dll
else ifeq ($(OS), Darwin)
SHLIB_EXT := dylib
else
SHLIB_EXT := so
endif
ifeq ($(OS),WINNT)
define versioned_libname
$$(if $(2),$(1)-$(2).$(SHLIB_EXT),$(1).$(SHLIB_EXT))
endef
else ifeq ($(OS),Darwin)
define versioned_libname
$$(if $(2),$(1).$(2).$(SHLIB_EXT),$(1).$(SHLIB_EXT))
endef
else
define versioned_libname
$$(if $(2),$(1).$(SHLIB_EXT).$(2),$(1).$(SHLIB_EXT))
endef
endif
ifeq ($(SHLIB_EXT), so)
define SONAME_FLAGS
-Wl,-soname=$1
endef
else
define SONAME_FLAGS
endef
endif
ifeq ($(OS),WINNT)
define IMPLIB_FLAGS
-Wl,--out-implib,$(build_libdir)/$(notdir $1).a
endef
else
define IMPLIB_FLAGS
endef
endif
# On Windows, we want shared library files to end up in $(build_bindir), instead of $(build_libdir)
# We also don't really have a private bindir on windows right now, due to lack of RPATH.
ifeq ($(OS),WINNT)
shlibdir := $(bindir)
private_shlibdir := $(bindir)
build_shlibdir := $(build_bindir)
build_private_shlibdir := $(build_bindir)
else
shlibdir := $(libdir)
private_shlibdir := $(private_libdir)
build_shlibdir := $(build_libdir)
build_private_shlibdir := $(build_private_libdir)
endif
# If we're on windows, don't do versioned shared libraries. If we're on OSX,
# put the version number before the .dylib. Otherwise, put it after.
ifeq ($(OS), WINNT)
JL_MAJOR_MINOR_SHLIB_EXT := $(SHLIB_EXT)
JL_MAJOR_SHLIB_EXT := $(SHLIB_EXT)
else
ifeq ($(OS), Darwin)
JL_MAJOR_MINOR_SHLIB_EXT := $(SOMAJOR).$(SOMINOR).$(SHLIB_EXT)
JL_MAJOR_SHLIB_EXT := $(SOMAJOR).$(SHLIB_EXT)
else
JL_MAJOR_MINOR_SHLIB_EXT := $(SHLIB_EXT).$(SOMAJOR).$(SOMINOR)
JL_MAJOR_SHLIB_EXT := $(SHLIB_EXT).$(SOMAJOR)
endif
endif
ifeq ($(OS), FreeBSD)
LOCALBASE ?= /usr/local
else
LOCALBASE ?= /usr
endif
ifeq (exists, $(shell [ -e $(JULIAHOME)/$(MAKE_USER_FNAME) ] && echo exists ))
include $(JULIAHOME)/$(MAKE_USER_FNAME)
endif
ifeq (exists, $(shell [ -e $(BUILDROOT)/$(MAKE_USER_FNAME) ] && echo exists ))
include $(BUILDROOT)/$(MAKE_USER_FNAME)
endif
# A bit of a kludge to work around libraries linking to FreeBSD's outdated system libgcc_s
# Instead, let's link to the libgcc_s corresponding to the installation of gfortran
ifeq ($(OS),FreeBSD)
ifneq (,$(findstring gfortran,$(FC)))
# First let's figure out what version of GCC we're dealing with
_GCCMAJOR := $(shell $(FC) -dumpversion 2>/dev/null | cut -d'.' -f1)
_GCCMINOR := $(shell $(FC) -dumpversion 2>/dev/null | cut -d'.' -f2)
# The ports system uses major and minor for GCC < 5 (e.g. gcc49 for GCC 4.9), otherwise major only
ifeq ($(_GCCMAJOR),4)
_GCCVER := $(_GCCMAJOR)$(_GCCMINOR)
else
_GCCVER := $(_GCCMAJOR)
endif
# Allow the user to specify this in Make.user
GCCPATH ?= $(LOCALBASE)/lib/gcc$(_GCCVER)
# We're going to copy over the libraries we need from GCCPATH into build_libdir, then
# tell everyone to look for them there. At install time, the build_libdir added into
# the RPATH here is removed by patchelf.
LDFLAGS += -L$(build_libdir) -Wl,-rpath,$(build_libdir)
endif # gfortran
endif # FreeBSD
ifneq ($(CC_BASE)$(CXX_BASE),$(shell echo $(CC) | cut -d' ' -f1)$(shell echo $(CXX) | cut -d' ' -f1))
$(error Forgot override directive on CC or CXX in Make.user? Cowardly refusing to build)
endif
ifeq ($(DARWIN_FRAMEWORK),1)
ifneq ($(OS), Darwin)
$(error Darwin framework cannot be enabled for non-Darwin OS)
endif
endif
ifeq ($(SANITIZE),1)
SANITIZE_OPTS :=
SANITIZE_LDFLAGS :=
ifeq ($(SANITIZE_MEMORY),1)
SANITIZE_OPTS += -fsanitize=memory -fsanitize-memory-track-origins -fno-omit-frame-pointer
SANITIZE_LDFLAGS += $(SANITIZE_OPTS)
ifneq ($(findstring $(OS),Linux FreeBSD),)
SANITIZE_LDFLAGS += -Wl,--warn-unresolved-symbols
endif # OS Linux or FreeBSD
endif # SANITIZE_MEMORY=1
ifeq ($(SANITIZE_ADDRESS),1)
SANITIZE_OPTS += -fsanitize=address
SANITIZE_LDFLAGS += -fsanitize=address -shared-libasan
endif
ifeq ($(SANITIZE_THREAD),1)
SANITIZE_OPTS += -fsanitize=thread
SANITIZE_LDFLAGS += -fsanitize=thread
endif
ifeq ($(SANITIZE_OPTS),)
$(error SANITIZE=1, but no sanitizer selected, set either SANITIZE_MEMORY, SANITIZE_THREAD, or SANITIZE_ADDRESS)
endif
JCXXFLAGS += $(SANITIZE_OPTS)
JCFLAGS += $(SANITIZE_OPTS)
JLDFLAGS += $(SANITIZE_LDFLAGS)
endif # SANITIZE
TAR := $(shell which gtar 2>/dev/null || which tar 2>/dev/null)
TAR_TEST := $(shell $(TAR) --help 2>&1 | grep -E 'bsdtar|strip-components')
ifeq (,$(findstring components,$(TAR_TEST)))
ifneq (bsdtar,$(findstring bsdtar,$(TAR_TEST)))
$(error "please install either GNU tar or bsdtar")
endif
endif
ifeq ($(WITH_GC_VERIFY), 1)
JCXXFLAGS += -DGC_VERIFY
JCFLAGS += -DGC_VERIFY
endif
ifeq ($(WITH_GC_DEBUG_ENV), 1)
JCXXFLAGS += -DGC_DEBUG_ENV
JCFLAGS += -DGC_DEBUG_ENV
endif
ifeq ($(WITH_DTRACE), 1)
JCXXFLAGS += -DUSE_DTRACE
JCFLAGS += -DUSE_DTRACE
DTRACE := dtrace
endif
ifeq ($(WITH_ITTAPI), 1)
JCXXFLAGS += -DUSE_ITTAPI
JCFLAGS += -DUSE_ITTAPI
LIBITTAPI:=-littnotify
endif
ifeq ($(WITH_TRACY), 1)
JCXXFLAGS += -DUSE_TRACY -DTRACY_ENABLE -DTRACY_FIBERS
JCFLAGS += -DUSE_TRACY -DTRACY_ENABLE -DTRACY_FIBERS
LIBTRACYCLIENT:=-lTracyClient
endif
ifeq ($(WITH_TRACY_CALLSTACKS), 1)
JCXXFLAGS += -DTRACY_CALLSTACK=32
JCFLAGS += -DTRACY_CALLSTACK=32
LIBTRACYCLIENT:=-lTracyClient
endif
ifeq ($(WITH_TIMING_COUNTS), 1)
JCXXFLAGS += -DUSE_TIMING_COUNTS
JCFLAGS += -DUSE_TIMING_COUNTS
endif
# ===========================================================================
# Select the cpu architecture to target, or automatically detects the user's compiler
# ARCH is the first element of the triple, and gives the CPU class (e.g. x86_64)
# MARCH is the CPU type, and accepts anything that can be passed to the gcc -march flag
# it is set equal to ARCH (for cases where the two are the same, such as i686)
# it can be set to native to optimize all code for the user's machine (not just the JIT code)
# if MARCH is set newer than the native processor, be forewarned that the compile might fail
# JULIA_CPU_TARGET is the JIT-only complement to MARCH. Setting it explicitly is not generally necessary,
# since it is set equal to MARCH by default
BUILD_MACHINE := $(shell $(HOSTCC) -dumpmachine)
# Clang spells mingw `-windows-gnu`, but autotools, etc
# don't recognize that, so canonicalize to mingw32
BUILD_MACHINE := $(subst windows-gnu,mingw32,$(BUILD_MACHINE))
ifeq ($(ARCH),)
override ARCH := $(shell $(CC) -dumpmachine | sed "s/\([^-]*\).*$$/\1/")
else
ifneq ($(XC_HOST),)
XC_HOST := $(ARCH)$(shell echo $(XC_HOST) | sed "s/[^-]*\(.*\)$$/\1/")
ifneq ($(findstring arm, $(ARCH))$(findstring aarch64, $(ARCH)),)
MCPU := $(subst _,-,$(ARCH)) # Arm prefers MCPU over MARCH
else
MARCH := $(subst _,-,$(ARCH))
endif
else # insert ARCH into HOST
XC_HOST := $(ARCH)$(shell echo $(BUILD_MACHINE) | sed "s/[^-]*\(.*\)$$/\1/")
endif
endif
# Normalize ppc64le to powerpc64le
ifeq ($(ARCH), ppc64le)
override ARCH := powerpc64le
endif
ifeq ($(ARCH),mingw32)
$(error "the mingw32 compiler you are using fails the openblas testsuite. please see the README.windows document for a replacement")
else ifeq (cygwin, $(shell $(CC) -dumpmachine | cut -d\- -f3))
$(error "cannot build julia with cygwin-target compilers. set XC_HOST to i686-w64-mingw32 or x86_64-w64-mingw32 for mingw cross-compile")
else ifeq (msys, $(shell $(CC) -dumpmachine | cut -d\- -f3))
$(error "cannot build julia with msys-target compilers. please see the README.windows document for instructions on setting up mingw-w64 compilers")
else ifneq (,$(findstring MSYS,$(shell uname)))
$(error "cannot build julia from a msys shell. please launch a mingw shell instead by setting MSYSTEM=MINGW64")
endif
ifeq ($(BUILD_OS),Darwin)
## Mac is a rather cool 64-bit user-space on 32-bit kernel architecture, so to determine arch we detect
## the capabilities of the hardware, rather than the compiler or kernel, and make a substitution
BUILD_ARCH := $(shell echo $(BUILD_MACHINE) | sed "s/\([^-]*\).*$$/\1/")
ifeq ($(BUILD_ARCH),x86_64)
BUILD_ARCH := i686
else ifeq ($(BUILD_ARCH),i386)
BUILD_ARCH := i686
endif
ifeq ($(BUILD_ARCH),i686)
ifeq ($(shell sysctl -n hw.cpu64bit_capable),1)
BUILD_ARCH := x86_64
endif
BUILD_MACHINE := $(BUILD_ARCH)$(shell echo $(BUILD_MACHINE) | sed "s/[^-]*\(.*\)$$/\1/")
endif
ifeq ($(BUILD_OS),$(OS))
ARCH := $(BUILD_OS)
endif
endif
# Detect common pre-SSE2 JULIA_CPU_TARGET values known not to work (#7185)
ifeq ($(MARCH),)
ifneq ($(findstring $(ARCH),i386 i486 i586 i686),)
MARCH := pentium4
endif
endif
ifneq ($(findstring $(MARCH),i386 i486 i586 i686 pentium pentium2 pentium3),)
$(error Pre-SSE2 CPU targets not supported. To create a generic 32-bit x86 binary, \
pass 'MARCH=pentium4'.)
endif
# We map amd64 to x86_64 for compatibility with systems that identify 64-bit systems as such
ifeq ($(ARCH),amd64)
override ARCH := x86_64
endif
# We map arm64 (Apple spelling) to aarch64 to avoid having to deal with both spellings everywhere
ifeq ($(ARCH),arm64)
override ARCH := aarch64
endif
ifeq ($(ARCH),i386)
BINARY:=32
ISX86:=1
else ifeq ($(ARCH),i387)
BINARY:=32
ISX86:=1
else ifeq ($(ARCH),i486)
BINARY:=32
ISX86:=1
else ifeq ($(ARCH),i586)
BINARY:=32
ISX86:=1
else ifeq ($(ARCH),i686)
BINARY:=32
ISX86:=1
else ifeq ($(ARCH),x86_64)
BINARY:=64
ISX86:=1
else
# For all other architectures (ARM, PPC, AArch64, etc.)
ISX86:=0
endif
# If we are running on powerpc64le or ppc64le, set certain options automatically
ifneq (,$(filter $(ARCH), powerpc64le ppc64le))
JCFLAGS += -fsigned-char
OPENBLAS_TARGET_ARCH:=POWER8
BINARY:=64
# GCC doesn't do -march= on ppc64le
MARCH=
endif
# If we are running on powerpc64 or ppc64, fail out dramatically
ifneq (,$(filter $(ARCH), powerpc64 ppc64))
$(error Big-endian PPC64 is not supported, to ignore this error, set ARCH=ppc64le)
endif
# File name of make binary-dist result
ifeq ($(JULIA_BINARYDIST_FILENAME),)
DIST_OS:=$(shell echo $(OS) | tr '[:upper:]' '[:lower:]')
ifeq (WINNT,$(OS))
DIST_OS:=win
endif
ifeq (Linux,$(OS))
DIST_OS:=linux
endif
ifeq (Darwin,$(OS))
DIST_OS:=mac
endif
DIST_ARCH:=$(ARCH)
ifneq (,$(filter $(ARCH), powerpc64le ppc64le))
DIST_ARCH:=ppc64le
endif
ifeq (1,$(ISX86))
# on x86 make sure not to use 80 bit math when we want 64 bit math.
ifeq (32,$(BINARY))
JCFLAGS += -mfpmath=sse
endif
DIST_ARCH:=$(BINARY)
endif
ifneq (,$(findstring arm,$(ARCH)))
DIST_ARCH:=arm
endif
JULIA_BINARYDIST_FILENAME := julia-$(JULIA_COMMIT)-$(DIST_OS)$(DIST_ARCH)
endif
# If we are running on ARM, set certain options automatically
ifneq (,$(findstring arm,$(ARCH)))
JCFLAGS += -fsigned-char
USE_BLAS64:=0
OPENBLAS_DYNAMIC_ARCH:=0
OPENBLAS_TARGET_ARCH:=ARMV7
endif
# If we are running on aarch64 (e.g. ARMv8 or ARM64), set certain options automatically
ifneq (,$(findstring aarch64,$(ARCH)))
OPENBLAS_DYNAMIC_ARCH:=0
OPENBLAS_TARGET_ARCH:=ARMV8
USE_BLAS64:=1
BINARY:=64
endif
# Set MARCH-specific flags
ifneq ($(MARCH),)
CC += -march=$(MARCH)
CXX += -march=$(MARCH)
FC += -march=$(MARCH)
JULIA_CPU_TARGET ?= $(MARCH)
endif
# Set MCPU-specific flags
ifneq ($(MCPU),)
CC += -mcpu=$(MCPU)
CXX += -mcpu=$(MCPU)
FC += -mcpu=$(MCPU)
JULIA_CPU_TARGET ?= $(MCPU)
endif
ifneq ($(MARCH)$(MCPU),)
ifeq ($(OS),Darwin)
# on Darwin, the standalone `as` program doesn't know
# how to handle AVX instructions, but it does know how
# to dispatch to the clang assembler (if we ask it to)
ifeq ($(USECLANG),1)
CC += -integrated-as
CXX += -integrated-as
else
CC += -Wa,-q
CXX += -Wa,-q
endif
FC += -Wa,-q
AS += -q
endif
endif
JULIA_CPU_TARGET ?= native
ifneq ($(OS),WINNT)
# Windows headers with this configuration conflicts with LLVM
# (Symbol renames are done with macros)
# We mainly need this on linux for cgmemmgr so don't worry about windows for now...
JCXXFLAGS += -D_FILE_OFFSET_BITS=64
endif
# Set some ARCH-specific flags
ifeq ($(ISX86),1)
CC += -m$(BINARY)
CXX += -m$(BINARY)
FC += -m$(BINARY)
CC_ARG += -m$(BINARY)
CXX_ARG += -m$(BINARY)
FC_ARG += -m$(BINARY)
endif
ifeq ($(OS),WINNT)
ifneq ($(ARCH),x86_64)
ifneq ($(USECLANG),1)
JCFLAGS += -mincoming-stack-boundary=2
JCXXFLAGS += -mincoming-stack-boundary=2
endif
endif
endif
ifeq ($(USEGCC),1)
ifeq ($(ISX86),1)
SHIPFLAGS += -momit-leaf-frame-pointer
endif
endif
ifeq ($(OS),WINNT)
LIBUNWIND:=
else ifneq ($(DISABLE_LIBUNWIND), 0)
LIBUNWIND:=
else
ifeq ($(USE_SYSTEM_LIBUNWIND), 1)
ifneq ($(OS),Darwin)
LIBUNWIND:=-lunwind
# Only for linux since we want to use not yet released libunwind features
JCFLAGS+=-DSYSTEM_LIBUNWIND
JCPPFLAGS+=-DSYSTEM_LIBUNWIND
endif
else
ifeq ($(OS),Darwin)
LIBUNWIND:=-lunwind
JCPPFLAGS+=-DLLVMLIBUNWIND
else
LIBUNWIND:=-lunwind
endif
endif
endif
ifeq ($(origin LLVM_CONFIG), undefined)
ifeq ($(USE_SYSTEM_LLVM), 1)
LLVM_CONFIG := llvm-config$(EXE)
else
LLVM_CONFIG := $(build_depsbindir)/llvm-config$(EXE)
endif
endif # LLVM_CONFIG undefined
ifeq ($(USE_SYSTEM_LLVM), 1)
JCPPFLAGS+=-DSYSTEM_LLVM
endif # SYSTEM_LLVM
# Windows builds need a little help finding the LLVM libraries for llvm-config
# use delayed expansion (= not :=) because spawn isn't defined until later
# WINEPATH is only needed for a wine-based cross compile
LLVM_CONFIG_PATH_FIX =
ifeq ($(OS),WINNT)
LLVM_CONFIG_PATH_FIX = PATH="$(build_bindir):$(PATH)" WINEPATH="$(call cygpath_w,$(build_bindir));$(WINEPATH)"
endif
ifeq ($(BUILD_OS),$(OS))
LLVM_CONFIG_HOST = $(LLVM_CONFIG_PATH_FIX) $(LLVM_CONFIG)
else
LLVM_CONFIG_HOST := $(basename $(LLVM_CONFIG))-host$(BUILD_EXE)
ifneq (exists, $(shell [ -f '$(LLVM_CONFIG_HOST)' ] && echo exists ))
# llvm-config-host does not exist (cmake build)
LLVM_CONFIG_HOST = $(LLVM_CONFIG_PATH_FIX) $(call spawn,$(LLVM_CONFIG))
endif
endif
ifeq ($(USE_SYSTEM_PCRE), 1)
PCRE_CONFIG := pcre2-config
else
PCRE_CONFIG := $(build_depsbindir)/pcre2-config
endif
ifeq ($(USE_SYSTEM_PATCHELF), 1)
PATCHELF := patchelf
else
PATCHELF := $(build_depsbindir)/patchelf
endif
# In the standard build system we want to patch files with `--set-rpath`, but downstream
# packagers like Spack may want to use `--add-rpath` instead, leave them the possibility to
# choose the command.
PATCHELF_SET_RPATH_ARG := --set-rpath
ifeq ($(USE_SYSTEM_LIBWHICH), 1)
LIBWHICH := libwhich
else
LIBWHICH := $(build_depsbindir)/libwhich
endif
# On aarch64 and powerpc64le, we assume the page size is 64K. Our binutils linkers
# and such already assume this, but `patchelf` seems to be behind the times. We
# explicitly tell it to use this large page size so that when we rewrite rpaths and
# such, we don't accidentally create incorrectly-aligned sections in our ELF files.
ifneq (,$(filter $(ARCH),aarch64 powerpc64le))
PATCHELF += --page-size 65536
endif
# Use ILP64 BLAS interface when building openblas from source on 64-bit architectures
ifeq ($(BINARY), 64)
ifeq ($(USE_SYSTEM_BLAS), 1)
USE_BLAS64 ?= 0
else
USE_BLAS64 ?= 1
endif
endif
ifeq ($(USE_SYSTEM_BLAS), 1)
ifeq ($(OS), Darwin)
USE_BLAS64 := 0
USE_SYSTEM_LAPACK := 0
LIBBLAS := -L$(build_libdir) -lgfortblas
LIBBLASNAME := libgfortblas
else
LIBBLAS ?= -lblas
LIBBLASNAME ?= libblas
endif
else
LIBBLAS := -L$(build_shlibdir) -lopenblas
LIBBLASNAME := libopenblas
endif
# OpenBLAS builds LAPACK as part of its build.
# We only need to build LAPACK if we are not using OpenBLAS.
ifeq ($(USE_SYSTEM_BLAS), 0)
LIBLAPACK := $(LIBBLAS)
LIBLAPACKNAME := $(LIBBLASNAME)
else
ifeq ($(USE_SYSTEM_LAPACK), 1)
LIBLAPACK ?= -llapack
LIBLAPACKNAME ?= liblapack
else
LIBLAPACK := -L$(build_shlibdir) -llapack $(LIBBLAS)
LIBLAPACKNAME := liblapack
endif
endif
ifeq ($(USE_SYSTEM_LIBM), 1)
LIBM := -lm
LIBMNAME := libm
else
LIBM := -lopenlibm
LIBMNAME := libopenlibm
endif
ifeq ($(USE_SYSTEM_LIBUV), 1)
LIBUV := $(LOCALBASE)/lib/libuv-julia.a
LIBUV_INC := $(LOCALBASE)/include
else
LIBUV := $(build_libdir)/libuv.a
LIBUV_INC := $(build_includedir)
endif
ifeq ($(USE_SYSTEM_UTF8PROC), 1)
LIBUTF8PROC := -lutf8proc
UTF8PROC_INC := $(LOCALBASE)/include
else
LIBUTF8PROC := $(build_libdir)/libutf8proc.a
UTF8PROC_INC := $(build_includedir)
endif
# We need python for things like BB triplet recognition. We don't really care
# about version, generally, so just find something that works:
PYTHON := "$(shell which python 2>/dev/null || which python3 2>/dev/null || which python2 2>/dev/null || echo not found)"
PYTHON_SYSTEM := $(shell $(PYTHON) -c 'from __future__ import print_function; import platform; print(platform.system())')
# If we're running on Cygwin, but using a native-windows Python, we need to use cygpath -w
ifneq ($(and $(filter $(PYTHON_SYSTEM),Windows),$(findstring CYGWIN,$(BUILD_OS))),)
define invoke_python
$(PYTHON) "$$(cygpath -w "$(1)")"
endef
else
define invoke_python
$(PYTHON) "$(1)"
endef
endif
# BinaryBuilder options. We default to "on" for all the projects listed in BB_PROJECTS,
# but only if contrib/normalize_triplet.py works for our requested triplet.
ifeq ($(shell $(call invoke_python,$(JULIAHOME)/contrib/normalize_triplet.py) $(or $(XC_HOST),$(XC_HOST),$(BUILD_MACHINE)) >/dev/null 2>/dev/null; echo $$?),0)
USE_BINARYBUILDER ?= 1
else
ifneq ($(shell $(call invoke_python,$(JULIAHOME)/contrib/normalize_triplet.py) x86_64-linux-gnu),x86_64-linux-gnu)
$(warning normalize_triplet.py appears to be non-functional (used python interpreter "$(PYTHON)"), so BinaryBuilder disabled)
endif
USE_BINARYBUILDER ?= 0
endif
# Auto-detect triplet once, create different versions that we use as defaults below for each BB install target
FC_VERSION := $(shell $(FC) -dM -E - < /dev/null 2>/dev/null | grep __GNUC__ | cut -d' ' -f3)
ifeq ($(USEGCC)$(FC_VERSION),1)
FC_OR_CC_VERSION := $(shell $(CC) -dumpfullversion -dumpversion 2>/dev/null | cut -d'.' -f1)
# n.b. clang's __GNUC__ macro pretends to be gcc 4.2.1, so leave it as the empty string here if the compiler is not certain to be GCC
endif
BB_TRIPLET_LIBGFORTRAN_CXXABI := $(shell $(call invoke_python,$(JULIAHOME)/contrib/normalize_triplet.py) $(or $(XC_HOST),$(XC_HOST),$(BUILD_MACHINE)) "$(FC_OR_CC_VERSION)" "$(or $(shell echo '\#include <string>' | $(CXX) $(CXXFLAGS) -x c++ -dM -E - | grep _GLIBCXX_USE_CXX11_ABI | awk '{ print $$3 }' ),1)")
BB_TRIPLET_LIBGFORTRAN := $(subst $(SPACE),-,$(filter-out cxx%,$(subst -,$(SPACE),$(BB_TRIPLET_LIBGFORTRAN_CXXABI))))
BB_TRIPLET_CXXABI := $(subst $(SPACE),-,$(filter-out libgfortran%,$(subst -,$(SPACE),$(BB_TRIPLET_LIBGFORTRAN_CXXABI))))
BB_TRIPLET := $(subst $(SPACE),-,$(filter-out cxx%,$(filter-out libgfortran%,$(subst -,$(SPACE),$(BB_TRIPLET_LIBGFORTRAN_CXXABI)))))
LIBGFORTRAN_VERSION := $(subst libgfortran,,$(filter libgfortran%,$(subst -,$(SPACE),$(BB_TRIPLET_LIBGFORTRAN))))
# CSL_NEXT_GLIBCXX_VERSION is a triple of the symbols representing support for whatever
# the next libstdc++ version would be. This is used for two things.
# 1. Whether the system libraries are new enough, if we need to use the libs bundled with CSL
# 2. To know which libstdc++ to load at runtime
# We want whichever libstdc++ library is newer, because if we don't it can cause problems.
# While what CSL bundles is quite bleeding-edge compared to what most distros ship, if someone
# tries to build an older branch of Julia, the version of CSL that ships with it may be
# relatively old. This is not a problem for code that is built in BB, but when we build Julia
# with the system compiler, that compiler uses the version of `libstdc++` that it is bundled
# with, and we can get linker errors when trying to run that `julia` executable with the
# `libstdc++` that comes from the (now old) BB-built CSL.
# To fix this, we take note when the system `libstdc++.so` is newer than whatever we
# would get from CSL (by searching for a `GLIBCXX_X.Y.Z` symbol that does not exist
# in our CSL, but would in a newer one), and default to `USE_BINARYBUILDER_CSL=0` in
# this case. This ensures that we link against a version with the symbols required.
# We also check the system libstdc++ at runtime in the cli loader library, and
# load it if it contains the version symbol that indicates that it is newer than the one
# shipped with CSL. Although we do not depend on any of the symbols, it is entirely
# possible that a user might choose to install a library which depends on symbols provided
# by a newer libstdc++. Without runtime detection, those libraries would break.
CSL_NEXT_GLIBCXX_VERSION=GLIBCXX_3\.4\.31|GLIBCXX_3\.5\.|GLIBCXX_4\.
# This is the set of projects that BinaryBuilder dependencies are hooked up for.
# Note: we explicitly _do not_ define `CSL` here, since it requires some more
# advanced techniques to decide whether it should be installed from a BB source
# or not. See `deps/csl.mk` for more detail.
BB_PROJECTS := BLASTRAMPOLINE OPENBLAS LLVM LIBSUITESPARSE OPENLIBM GMP MBEDTLS LIBSSH2 NGHTTP2 MPFR CURL LIBGIT2 PCRE LIBUV LIBUNWIND DSFMT OBJCONV ZLIB P7ZIP LLD LIBTRACYCLIENT
define SET_BB_DEFAULT
# First, check to see if BB is disabled on a global setting
ifeq ($$(USE_BINARYBUILDER),0)
USE_BINARYBUILDER_$(1) ?= 0
else
# If it's not, check to see if it's disabled by a USE_SYSTEM_xxx flag
ifeq ($$(USE_SYSTEM_$(1)),1)
USE_BINARYBUILDER_$(1) ?= 0
else
USE_BINARYBUILDER_$(1) ?= 1
endif
endif
endef
$(foreach proj,$(BB_PROJECTS),$(eval $(call SET_BB_DEFAULT,$(proj))))
# Warn if the user tries to build something that requires `gfortran` but they don't have it installed.
ifeq ($(FC_VERSION),)
ifneq ($(USE_BINARYBUILDER_OPENBLAS)$(USE_BINARYBUILDER_LIBSUITESPARSE),11)
$(error "Attempting to build OpenBLAS or SuiteSparse without a functioning fortran compiler!")
endif
endif
# OS specific stuff
# install_name_tool
ifeq ($(OS), Darwin)
# must end with a / and have no trailing spaces
INSTALL_NAME_ID_DIR := @rpath/
INSTALL_NAME_CMD := install_name_tool -id $(INSTALL_NAME_ID_DIR)
INSTALL_NAME_CHANGE_CMD := install_name_tool -change
ifneq (,$(findstring LLVM,$(shell dsymutil --version)))
DSYMUTIL := dsymutil
else ifeq ($(shell test `dsymutil -v | cut -d\- -f2 | cut -d. -f1` -gt 102 && echo yes), yes)
DSYMUTIL := dsymutil
else
DSYMUTIL := true -ignore
endif
else
INSTALL_NAME_ID_DIR :=
INSTALL_NAME_CMD := true -ignore
INSTALL_NAME_CHANGE_CMD := true -ignore
DSYMUTIL := true -ignore
endif
# shared library runtime paths
ifneq (,$(filter $(OS),WINNT emscripten))
RPATH :=
RPATH_ORIGIN :=
RPATH_ESCAPED_ORIGIN :=
else ifeq ($(OS), Darwin)
RPATH := -Wl,-rpath,'@executable_path/$(build_libdir_rel)'
RPATH_ORIGIN := -Wl,-rpath,'@loader_path/'
RPATH_ESCAPED_ORIGIN := $(RPATH_ORIGIN)
else
RPATH := -Wl,-rpath,'$$ORIGIN/$(build_libdir_rel)' -Wl,-rpath,'$$ORIGIN/$(build_private_libdir_rel)' -Wl,-rpath-link,$(build_shlibdir) -Wl,-z,origin -Wl,--enable-new-dtags
RPATH_ORIGIN := -Wl,-rpath,'$$ORIGIN' -Wl,-z,origin -Wl,--enable-new-dtags
RPATH_ESCAPED_ORIGIN := -Wl,-rpath,'\$$\$$ORIGIN' -Wl,-z,origin -Wl,-rpath-link,$(build_shlibdir) -Wl,--enable-new-dtags
endif
RPATH_LIB := $(RPATH_ORIGIN)
# --whole-archive
ifeq ($(OS), Darwin)
WHOLE_ARCHIVE := -Xlinker -all_load
NO_WHOLE_ARCHIVE :=
else
WHOLE_ARCHIVE := -Wl,--whole-archive
NO_WHOLE_ARCHIVE := -Wl,--no-whole-archive
endif
# Initialize these once, then add to them in OS-specific blocks
JLIBLDFLAGS :=
ifeq ($(OS), Linux)
OSLIBS += -Wl,--no-as-needed -ldl -lrt -lpthread -latomic -Wl,--export-dynamic,--as-needed,--no-whole-archive
# Detect if ifunc is supported
IFUNC_DETECT_SRC := 'void (*f0(void))(void) { return (void(*)(void))0L; }; void f(void) __attribute__((ifunc("f0")));'
ifeq (supported, $(shell echo $(IFUNC_DETECT_SRC) | $(CC) -Werror -x c - -S -o /dev/null > /dev/null 2>&1 && echo supported))
JCPPFLAGS += -DJULIA_HAS_IFUNC_SUPPORT=1
endif
JLDFLAGS += -Wl,-Bdynamic
OSLIBS += -Wl,--version-script=$(JULIAHOME)/src/julia.expmap
ifneq ($(SANITIZE),1)
JLDFLAGS += -Wl,-no-undefined
endif
ifeq (-Bsymbolic-functions, $(shell $(LD) --help | grep -o -e "-Bsymbolic-functions"))
JLIBLDFLAGS += -Wl,-Bsymbolic-functions
endif
ifeq (--enable-new-dtags, $(shell $(LD) --help | grep -o -e "--enable-new-dtags"))
JLIBLDFLAGS += -Wl,--enable-new-dtags
endif
# Linker doesn't detect automatically that Julia doesn't need executable stack
JLIBLDFLAGS += -Wl,-z,noexecstack
endif
ifeq ($(OS), FreeBSD)
JLDFLAGS += -Wl,-Bdynamic
OSLIBS += -lelf -lkvm -lrt -lpthread -latomic
# Tweak order of libgcc_s in DT_NEEDED,
# make it loaded first to
# prevent from linking to outdated system libs.
# See #21788
OSLIBS += -lgcc_s
OSLIBS += -Wl,--export-dynamic -Wl,--version-script=$(JULIAHOME)/src/julia.expmap \
$(NO_WHOLE_ARCHIVE)
endif
ifeq ($(OS), Darwin)
SHLIB_EXT := dylib
OSLIBS += -framework CoreFoundation
WHOLE_ARCHIVE := -Xlinker -all_load
NO_WHOLE_ARCHIVE :=
HAVE_SSP := 1
JLIBLDFLAGS += -Wl,-compatibility_version,$(SOMAJOR) -Wl,-current_version,$(JULIA_MAJOR_VERSION).$(JULIA_MINOR_VERSION).$(JULIA_PATCH_VERSION)
endif
ifeq ($(OS), WINNT)
HAVE_SSP := 1
OSLIBS += -Wl,--export-all-symbols -Wl,--version-script=$(JULIAHOME)/src/julia.expmap \
$(NO_WHOLE_ARCHIVE) -lpsapi -lkernel32 -lws2_32 -liphlpapi -lwinmm -ldbghelp -luserenv -lsecur32 -latomic
JLDFLAGS += -Wl,--stack,8388608
ifeq ($(ARCH),i686)
JLDFLAGS += -Wl,--large-address-aware
endif
JCPPFLAGS += -D_WIN32_WINNT=0x0502
UNTRUSTED_SYSTEM_LIBM := 1
# Use hard links for files on windows, rather than soft links
# https://stackoverflow.com/questions/3648819/how-to-make-a-symbolic-link-with-cygwin-in-windows-7
# Usage: $(WIN_MAKE_HARD_LINK) <source> <target>
WIN_MAKE_HARD_LINK := cp --dereference --link --force
else
WIN_MAKE_HARD_LINK := true -ignore
endif # $(OS) == WINNT
# Threads
ifneq ($(JULIA_THREADS), 0)
JCPPFLAGS += -DJULIA_NUM_THREADS=$(JULIA_THREADS)
endif
# Intel VTune Amplifier
ifeq ($(USE_INTEL_JITEVENTS), 1)
JCPPFLAGS += -DJL_USE_INTEL_JITEVENTS
endif
# OProfile
ifeq ($(USE_OPROFILE_JITEVENTS), 1)
JCPPFLAGS += -DJL_USE_OPROFILE_JITEVENTS
endif
ifeq ($(DISABLE_LIBUNWIND), 1)
JCPPFLAGS += -DJL_DISABLE_LIBUNWIND
endif
# perf
ifeq ($(USE_PERF_JITEVENTS), 1)
JCPPFLAGS += -DJL_USE_PERF_JITEVENTS
endif
ifeq ($(HAVE_SSP),1)
JCPPFLAGS += -DHAVE_SSP=1
ifeq ($(USEGCC),1)
OSLIBS += -lssp
endif
endif
# Renaming OpenBLAS symbols, see #4923 and #8734
ifeq ($(USE_SYSTEM_BLAS), 0)
ifeq ($(USE_BLAS64), 1)
OPENBLAS_SYMBOLSUFFIX := 64_
OPENBLAS_LIBNAMESUFFIX := 64_
LIBBLAS := -L$(build_shlibdir) -lopenblas$(OPENBLAS_LIBNAMESUFFIX)
LIBLAPACK := $(LIBBLAS)
LIBBLASNAME := $(LIBBLASNAME)$(OPENBLAS_LIBNAMESUFFIX)
LIBLAPACKNAME := $(LIBBLASNAME)
endif
endif
# Custom libcxx
ifeq ($(BUILD_CUSTOM_LIBCXX),1)
$(error BUILD_CUSTOM_LIBCXX is currently not supported, BUILD_LIBCXX will provide LIBCXX but not link it)
LDFLAGS += -L$(build_libdir)
CXXLDFLAGS += -L$(build_libdir) -lc++abi -lc++
ifeq ($(USECLANG),1)
CXXLDFLAGS += -stdlib=libc++
else
ifeq ($(USEGCC),1)
$(error BUILD_CUSTOM_LIBCXX is currently only supported with Clang. Try setting BUILD_CUSTOM_LIBCXX=0 or USECLANG=1)
endif
endif # Clang
CUSTOM_LD_LIBRARY_PATH := LD_LIBRARY_PATH="$(build_libdir)"
endif
# Some special restrictions on BB usage:
ifeq ($(USE_SYSTEM_BLAS),1)
# Since the names don't line up (`BLAS` vs. `OPENBLAS`), manually gate:
USE_BINARYBUILDER_OPENBLAS := 0
# Disable BB LIBSUITESPARSE if we're using system BLAS
USE_BINARYBUILDER_LIBSUITESPARSE := 0
endif
ifeq ($(USE_SYSTEM_LIBM),1)
# If we're using system libm, disable BB OpenLibm
USE_BINARYBUILDER_OPENLIBM := 0
endif
# Note: we're passing *FLAGS here computed based on your system compiler to
# clang. If that causes you problems, you might want to build and/or run
# specific clang-sa-* files with clang explicitly selected:
# make CC=~+/../usr/tools/clang CXX=~+/../usr/tools/clang USECLANG=1 analyzegc
# make USECLANG=1 clang-sa-*
CLANGSA_FLAGS :=
CLANGSA_CXXFLAGS :=
ifeq ($(OS), Darwin) # on new XCode, the files are hidden
CLANGSA_FLAGS += -isysroot $(shell xcode-select -p)/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk
endif
ifeq ($(USEGCC),1)
# try to help clang find the c++ files for CC by guessing the value for --prefix
# by dropping lib/gcc/<platform>/<version> from the install directory it reports
CLANGSA_CXXFLAGS += --gcc-toolchain="$(abspath $(shell LANG=C $(CC) -print-search-dirs | grep '^install: ' | sed -e "s/^install: //")/../../../..)"
endif
# Make tricks
define dir_target
$$(abspath $(1)):
@mkdir -p $$@
endef
ifeq ($(BUILD_OS), WINNT)
define mingw_to_dos
$(subst /,\\,$(subst $(shell $(2) pwd),$(shell $(2) cmd //C cd),$(abspath $(1))))
endef
endif
define symlink_target # (from, to-dir, to-name)
CLEAN_TARGETS += clean-$$(abspath $(2)/$(3))
clean-$$(abspath $(2)/$(3)):
ifeq ($(BUILD_OS), WINNT)
-cmd //C rmdir $$(call cygpath_w,$(2)/$(3))
else
rm -rf $$(abspath $(2)/$(3))
endif
$$(abspath $(2)/$(3)): | $$(abspath $(2))
ifeq ($$(BUILD_OS), WINNT)
@cmd //C mklink //J $$(call cygpath_w,$(2)/$(3)) $$(call cygpath_w,$(1))
else ifneq (,$$(findstring CYGWIN,$$(BUILD_OS)))
@cmd /C mklink /J $$(call cygpath_w,$(2)/$(3)) $$(call cygpath_w,$(1))
else ifdef JULIA_VAGRANT_BUILD
@rm -rf $$@
@cp -R $$(abspath $(1)) $$@.tmp
@mv $$@.tmp $$@
else
@ln -sf $$(abspath $(1)) $$@
endif
endef
# Overridable in Make.user
WINE ?= wine
# many of the following targets must be = not := because the expansion of the makefile functions (and $1) shouldn't happen until later
ifeq ($(BUILD_OS), WINNT) # MSYS
spawn = $(1)
cygpath_w = `cygpath -w $(1)`
else ifneq (,$(findstring CYGWIN,$(BUILD_OS))) # Cygwin
spawn = $(1)
cygpath_w = `cygpath -w $(1)`
else
ifeq ($(OS), WINNT) # unix-to-Windows cross-compile
spawn = $(WINE) $(1)
cygpath_w = `$(WINE) winepath.exe -w $(1)`
else # not Windows
spawn = $(1)
cygpath_w = $(1)
endif
endif
exec = $(shell $(call spawn,$(1)))
JULIA_BUILD_MODE := release
ifeq (,$(findstring release,$(MAKECMDGOALS)))
ifneq (,$(findstring debug,$(MAKECMDGOALS)))
JULIA_BUILD_MODE := debug
endif
endif
JULIA_EXECUTABLE_debug := $(build_bindir)/julia-debug$(EXE)
JULIA_EXECUTABLE_release := $(build_bindir)/julia$(EXE)
JULIA_EXECUTABLE := $(JULIA_EXECUTABLE_$(JULIA_BUILD_MODE))
JULIA_SYSIMG_debug := $(build_private_libdir)/sys-debug.$(SHLIB_EXT)
JULIA_SYSIMG_release := $(build_private_libdir)/sys.$(SHLIB_EXT)
JULIA_SYSIMG := $(JULIA_SYSIMG_$(JULIA_BUILD_MODE))
define dep_lib_path
$(shell $(PYTHON) $(call python_cygpath,$(JULIAHOME)/contrib/relative_path.py) $(1) $(2))
endef
LIBJULIAINTERNAL_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/libjulia-internal.$(JL_MAJOR_SHLIB_EXT))
LIBJULIAINTERNAL_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/libjulia-internal.$(JL_MAJOR_SHLIB_EXT))
LIBJULIAINTERNAL_DEBUG_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/libjulia-internal-debug.$(JL_MAJOR_SHLIB_EXT))
LIBJULIAINTERNAL_DEBUG_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/libjulia-internal-debug.$(JL_MAJOR_SHLIB_EXT))
LIBJULIACODEGEN_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/libjulia-codegen.$(JL_MAJOR_SHLIB_EXT))
LIBJULIACODEGEN_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/libjulia-codegen.$(JL_MAJOR_SHLIB_EXT))
LIBJULIACODEGEN_DEBUG_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/libjulia-codegen-debug.$(JL_MAJOR_SHLIB_EXT))
LIBJULIACODEGEN_DEBUG_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/libjulia-codegen-debug.$(JL_MAJOR_SHLIB_EXT))
ifeq ($(OS),WINNT)
ifeq ($(BINARY),32)
LIBGCC_NAME := libgcc_s_sjlj-1.$(SHLIB_EXT)
else
LIBGCC_NAME := libgcc_s_seh-1.$(SHLIB_EXT)
endif
endif
# On macOS, libgcc_s has soversion 1.1 always on aarch64 and only for GCC 12+
# (-> libgfortran 5) on x86_64
ifeq ($(OS),Darwin)
ifeq ($(ARCH),aarch64)
LIBGCC_NAME := libgcc_s.1.1.$(SHLIB_EXT)
else
ifeq ($(LIBGFORTRAN_VERSION),5)
LIBGCC_NAME := libgcc_s.1.1.$(SHLIB_EXT)
else
LIBGCC_NAME := libgcc_s.1.$(SHLIB_EXT)
endif
endif
endif
ifneq ($(findstring $(OS),Linux FreeBSD),)
LIBGCC_NAME := libgcc_s.$(SHLIB_EXT).1
endif
# USE_SYSTEM_CSL causes it to get symlinked into build_private_shlibdir
ifeq ($(USE_SYSTEM_CSL),1)
LIBGCC_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_private_shlibdir)/$(LIBGCC_NAME))
else
LIBGCC_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/$(LIBGCC_NAME))
endif
LIBGCC_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/$(LIBGCC_NAME))
# We only bother to define this on Linux, as that's the only platform that does libstdc++ probing
# On all other platforms, the LIBSTDCXX_*_DEPLIB variables will be empty.
ifeq ($(OS),Linux)
LIBSTDCXX_NAME := libstdc++.so.6
ifeq ($(USE_SYSTEM_CSL),1)
LIBSTDCXX_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_private_shlibdir)/$(LIBSTDCXX_NAME))
else
LIBSTDCXX_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/$(LIBSTDCXX_NAME))
endif
LIBSTDCXX_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/$(LIBSTDCXX_NAME))
endif
# USE_SYSTEM_LIBM and USE_SYSTEM_OPENLIBM causes it to get symlinked into build_private_shlibdir
ifeq ($(USE_SYSTEM_LIBM),1)
LIBM_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_private_shlibdir)/$(LIBMNAME).$(SHLIB_EXT))
else ifeq ($(USE_SYSTEM_OPENLIBM),1)
LIBM_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_private_shlibdir)/$(LIBMNAME).$(SHLIB_EXT))
else
LIBM_BUILD_DEPLIB := $(call dep_lib_path,$(build_libdir),$(build_shlibdir)/$(LIBMNAME).$(SHLIB_EXT))
endif
LIBM_INSTALL_DEPLIB := $(call dep_lib_path,$(libdir),$(private_shlibdir)/$(LIBMNAME).$(SHLIB_EXT))
# We list:
# * libgcc_s, because FreeBSD needs to load ours, not the system one.
# * libopenlibm, because Windows has an untrustworthy libm, and we want to use ours more than theirs
# * libstdc++, because while performing `libstdc++` probing we need to
# know the path to the bundled `libstdc++` library.
# * libjulia-internal, which must always come second-to-last.
# * libjulia-codegen, which must always come last
#
# We need these four separate variables because:
# * debug builds must link against libjuliadebug, not libjulia
# * install time relative paths are not equal to build time relative paths (../lib vs. ../lib/julia)
# That second point will no longer be true for most deps once they are placed within Artifacts directories.
# Note that we prefix `libjulia-codegen` and `libjulia-internal` with `@` to signify to the loader that it
# should not automatically dlopen() it in its loading loop, it is "special" and should happen later.
# We do the same for `libstdc++`, and explicitly place it _after_ `libgcc_s`, and `libm` since `libstdc++`
# may depend on those libraries (e.g. when USE_SYSTEM_LIBM=1)
# Helper function to join a list with colons, then place an extra at the end.
define build_deplibs
$(subst $(SPACE),:,$(strip $(1))):
endef
LOADER_BUILD_DEP_LIBS = $(call build_deplibs, \
$(LIBGCC_BUILD_DEPLIB) \
$(LIBM_BUILD_DEPLIB) \
@$(LIBSTDCXX_BUILD_DEPLIB) \
@$(LIBJULIAINTERNAL_BUILD_DEPLIB) \
@$(LIBJULIACODEGEN_BUILD_DEPLIB) \
)
LOADER_DEBUG_BUILD_DEP_LIBS = $(call build_deplibs, \
$(LIBGCC_BUILD_DEPLIB) \
$(LIBM_BUILD_DEPLIB) \
@$(LIBSTDCXX_BUILD_DEPLIB) \
@$(LIBJULIAINTERNAL_DEBUG_BUILD_DEPLIB) \
@$(LIBJULIACODEGEN_DEBUG_BUILD_DEPLIB) \
)
LOADER_INSTALL_DEP_LIBS = $(call build_deplibs, \
$(LIBGCC_INSTALL_DEPLIB) \
$(LIBM_INSTALL_DEPLIB) \
@$(LIBSTDCXX_INSTALL_DEPLIB) \
@$(LIBJULIAINTERNAL_INSTALL_DEPLIB) \
@$(LIBJULIACODEGEN_INSTALL_DEPLIB) \
)
LOADER_DEBUG_INSTALL_DEP_LIBS = $(call build_deplibs, \
$(LIBGCC_INSTALL_DEPLIB) \
$(LIBM_INSTALL_DEPLIB) \
@$(LIBSTDCXX_INSTALL_DEPLIB) \
@$(LIBJULIAINTERNAL_DEBUG_INSTALL_DEPLIB) \
@$(LIBJULIACODEGEN_DEBUG_INSTALL_DEPLIB) \
)
# Colors for make
ifndef VERBOSE
VERBOSE := 0
endif
WARNCOLOR:="\033[33;1m"
ENDCOLOR:="\033[0m"
ifeq ($(VERBOSE), 0)
QUIET_MAKE = -s
CCCOLOR:="\033[34m"
LINKCOLOR:="\033[34;1m"
PERLCOLOR:="\033[35m"
FLISPCOLOR:="\033[32m"
JULIACOLOR:="\033[32;1m"
DTRACECOLOR:="\033[32;1m"
SRCCOLOR:="\033[33m"
BINCOLOR:="\033[37;1m"
JULCOLOR:="\033[34;1m"
GOAL=$(subst ','\'',$(subst $(abspath $(JULIAHOME))/,,$(abspath $@)))
PRINT_CC = printf ' %b %b\n' $(CCCOLOR)CC$(ENDCOLOR) $(SRCCOLOR)$(GOAL)$(ENDCOLOR); $(1)
PRINT_ANALYZE = printf ' %b %b\n' $(CCCOLOR)ANALYZE$(ENDCOLOR) $(SRCCOLOR)$(GOAL)$(ENDCOLOR); $(1)
PRINT_LINK = printf ' %b %b\n' $(LINKCOLOR)LINK$(ENDCOLOR) $(BINCOLOR)$(GOAL)$(ENDCOLOR); $(1)
PRINT_PERL = printf ' %b %b\n' $(PERLCOLOR)PERL$(ENDCOLOR) $(BINCOLOR)$(GOAL)$(ENDCOLOR); $(1)
PRINT_FLISP = printf ' %b %b\n' $(FLISPCOLOR)FLISP$(ENDCOLOR) $(BINCOLOR)$(GOAL)$(ENDCOLOR); $(1)
PRINT_JULIA = printf ' %b %b\n' $(JULIACOLOR)JULIA$(ENDCOLOR) $(BINCOLOR)$(GOAL)$(ENDCOLOR); $(1)
PRINT_DTRACE = printf ' %b %b\n' $(DTRACECOLOR)DTRACE$(ENDCOLOR) $(BINCOLOR)$(GOAL)$(ENDCOLOR); $(1)
else
QUIET_MAKE =
PRINT_CC = echo '$(subst ','\'',$(1))'; $(1)
PRINT_ANALYZE = echo '$(subst ','\'',$(1))'; $(1)
PRINT_LINK = echo '$(subst ','\'',$(1))'; $(1)
PRINT_PERL = echo '$(subst ','\'',$(1))'; $(1)
PRINT_FLISP = echo '$(subst ','\'',$(1))'; $(1)
PRINT_JULIA = echo '$(subst ','\'',$(1))'; $(1)
PRINT_DTRACE = echo '$(subst ','\'',$(1))'; $(1)
endif
# Makefile debugging trick:
# call print-VARIABLE to see the runtime value of any variable
# (hardened against any special characters appearing in the output)
print-%:
@echo '$*=$(subst ','\'',$(subst $(newline),\n,$($*)))'
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...