Revision a34ff20549a8d87fc88b4dfaa87d5b1f0fd5298a authored by Shuhei Kadowaki on 22 June 2023, 06:15:33 UTC, committed by GitHub on 22 June 2023, 06:15:33 UTC
Code analysis tools such as JET.jl use `Meta.parse` to get a Julia code representation from textual data, or to display diagnostic messages when the input data is invalid. In such scenario it would be beneficial if these diagnostic messages could refer to the original file name of the input data. This commit allows `Meta.parse` to accept the optional `filename::AbstractString` argument for this purpose. If an error occurs, the `filename` can be included in the diagnostic information. The default value is set to `"none"`, thus preserving existing behavior.
1 parent fbb8d6c
Makefile
JULIAHOME := $(abspath $(dir $(lastword $(MAKEFILE_LIST))))
include $(JULIAHOME)/Make.inc
# import LLVM_SHARED_LIB_NAME
include $(JULIAHOME)/deps/llvm-ver.make
# Make sure the user didn't try to build in a path that will confuse the shell or make
METACHARACTERS := [][?*{}() $$%:;&|!\#,\\`\":]\|/\./\|/\.\./
ifneq (,$(findstring ',$(value BUILDROOT)))
$(error cowardly refusing to build into directory with a single-quote in the path)
endif
ifneq (,$(findstring ',$(value JULIAHOME)))
$(error cowardly refusing to build from source directory with a single-quote in the path)
endif
ifneq (,$(shell echo '$(value BUILDROOT)/' | grep '$(METACHARACTERS)'))
$(error cowardly refusing to build into directory with a shell-metacharacter in the path\
(got: $(value BUILDROOT)))
endif
ifneq (,$(shell echo '$(value JULIAHOME)/' | grep '$(METACHARACTERS)'))
$(error cowardly refusing to build from source directory with a shell-metacharacter in the path\
(got: $(value JULIAHOME)))
endif
VERSDIR := v`cut -d. -f1-2 < $(JULIAHOME)/VERSION`
default: $(JULIA_BUILD_MODE) # contains either "debug" or "release"
all: debug release
# sort is used to remove potential duplicates
DIRS := $(sort $(build_bindir) $(build_depsbindir) $(build_libdir) $(build_private_libdir) $(build_libexecdir) $(build_includedir) $(build_includedir)/julia $(build_sysconfdir)/julia $(build_datarootdir)/julia $(build_datarootdir)/julia/stdlib $(build_man1dir))
ifneq ($(BUILDROOT),$(JULIAHOME))
BUILDDIRS := $(BUILDROOT) $(addprefix $(BUILDROOT)/,base src src/flisp src/support src/clangsa cli doc deps stdlib test test/clangsa test/embedding test/gcext test/llvmpasses)
BUILDDIRMAKE := $(addsuffix /Makefile,$(BUILDDIRS)) $(BUILDROOT)/sysimage.mk $(BUILDROOT)/pkgimage.mk
DIRS += $(BUILDDIRS)
$(BUILDDIRMAKE): | $(BUILDDIRS)
@# add Makefiles to the build directories for convenience (pointing back to the source location of each)
@echo '# -- This file is automatically generated in julia/Makefile -- #' > $@
@echo 'BUILDROOT=$(BUILDROOT)' >> $@
@echo 'include $(JULIAHOME)$(patsubst $(BUILDROOT)%,%,$@)' >> $@
julia-deps: | $(BUILDDIRMAKE)
configure-y: | $(BUILDDIRMAKE)
configure:
ifeq ("$(origin O)", "command line")
@if [ "$$(ls '$(BUILDROOT)' 2> /dev/null)" ]; then \
printf $(WARNCOLOR)'WARNING: configure called on non-empty directory'$(ENDCOLOR)' %s\n' '$(BUILDROOT)'; \
read -p "Proceed [y/n]? " answer; \
else \
answer=y;\
fi; \
[ "y$$answer" = yy ] && $(MAKE) configure-$$answer
else
$(error "cannot rerun configure from within a build directory")
endif
else
configure:
$(error "must specify O=builddir to run the Julia `make configure` target")
endif
$(foreach dir,$(DIRS),$(eval $(call dir_target,$(dir))))
$(foreach link,base $(JULIAHOME)/test,$(eval $(call symlink_target,$(link),$$(build_datarootdir)/julia,$(notdir $(link)))))
julia_flisp.boot.inc.phony: julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src julia_flisp.boot.inc.phony
julia-symlink: julia-cli-$(JULIA_BUILD_MODE)
ifeq ($(OS),WINNT)
echo '@"%~dp0/'"$$(echo '$(call rel_path,$(BUILDROOT),$(JULIA_EXECUTABLE))')"'" %*' | tr / '\\' > $(BUILDROOT)/julia.bat
chmod a+x $(BUILDROOT)/julia.bat
else
ifndef JULIA_VAGRANT_BUILD
@ln -sf $(call rel_path,$(BUILDROOT),$(JULIA_EXECUTABLE)) $(BUILDROOT)/julia
endif
endif
julia-deps: | $(DIRS) $(build_datarootdir)/julia/base $(build_datarootdir)/julia/test
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/deps
# `julia-stdlib` depends on `julia-deps` so that the fake JLL stdlibs can copy in their Artifacts.toml files.
julia-stdlib: | $(DIRS) julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/stdlib
julia-base: julia-deps $(build_sysconfdir)/julia/startup.jl $(build_man1dir)/julia.1 $(build_datarootdir)/julia/julia-config.jl
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/base
julia-libccalltest: julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src libccalltest
julia-libllvmcalltest: julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src libllvmcalltest
julia-src-release julia-src-debug : julia-src-% : julia-deps julia_flisp.boot.inc.phony julia-cli-%
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/src $*
julia-cli-release julia-cli-debug: julia-cli-% : julia-deps
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/cli $*
julia-sysimg-ji : julia-stdlib julia-base julia-cli-$(JULIA_BUILD_MODE) julia-src-$(JULIA_BUILD_MODE) | $(build_private_libdir)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f sysimage.mk sysimg-ji JULIA_EXECUTABLE='$(JULIA_EXECUTABLE)'
julia-sysimg-bc : julia-stdlib julia-base julia-cli-$(JULIA_BUILD_MODE) julia-src-$(JULIA_BUILD_MODE) | $(build_private_libdir)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f sysimage.mk sysimg-bc JULIA_EXECUTABLE='$(JULIA_EXECUTABLE)'
julia-sysimg-release julia-sysimg-debug : julia-sysimg-% : julia-sysimg-ji julia-src-%
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f sysimage.mk sysimg-$*
julia-debug julia-release : julia-% : julia-sysimg-% julia-src-% julia-symlink julia-libccalltest julia-libllvmcalltest julia-base-cache
stdlibs-cache-release stdlibs-cache-debug : stdlibs-cache-% : julia-%
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT) -f pkgimage.mk all-$*
debug release : % : julia-% stdlibs-cache-%
docs: julia-sysimg-$(JULIA_BUILD_MODE)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/doc JULIA_EXECUTABLE='$(call spawn,$(JULIA_EXECUTABLE_$(JULIA_BUILD_MODE))) --startup-file=no'
docs-revise:
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/doc JULIA_EXECUTABLE='$(call spawn,$(JULIA_EXECUTABLE_$(JULIA_BUILD_MODE))) --startup-file=no' revise=true
check-whitespace:
ifneq ($(NO_GIT), 1)
@# Append the directory containing the julia we just built to the end of `PATH`,
@# to give us the best chance of being able to run this check.
@PATH="$(PATH):$(dir $(JULIA_EXECUTABLE))" julia $(call cygpath_w,$(JULIAHOME)/contrib/check-whitespace.jl)
else
$(warn "Skipping whitespace check because git is unavailable")
endif
release-candidate: release testall
@$(JULIA_EXECUTABLE) $(JULIAHOME)/contrib/add_license_to_files.jl #add license headers
@#Check documentation
@$(JULIA_EXECUTABLE) $(JULIAHOME)/doc/NEWS-update.jl #Add missing cross-references to NEWS.md
@$(MAKE) -C $(BUILDROOT)/doc html doctest=true linkcheck=true
@$(MAKE) -C $(BUILDROOT)/doc pdf
@# Check to see if the above make invocations changed anything important
@if [ -n "$$(git status --porcelain)" ]; then \
echo "Git repository dirty; Verify and commit changes to the repository, then retry"; \
exit 1; \
fi
@#Check that netload tests work
@#for test in test/netload/*.jl; do julia $$test; if [ $$? -ne 0 ]; then exit 1; fi; done
@echo
@echo To complete the release candidate checklist:
@echo
@echo 1. Remove deprecations in base/deprecated.jl
@echo 2. Update references to the julia version in the source directories, such as in README.md
@echo 3. Bump VERSION
@echo 4. Increase SOMAJOR and SOMINOR if needed.
@echo 5. Update SPDX document by running the script contrib/updateSPDX.jl
@echo 6. Create tag, push to github "\(git tag v\`cat VERSION\` && git push --tags\)" #"` # These comments deal with incompetent syntax highlighting rules
@echo 7. Clean out old .tar.gz files living in deps/, "\`git clean -fdx\`" seems to work #"`
@echo 8. Replace github release tarball with tarballs created from make light-source-dist and make full-source-dist with USE_BINARYBUILDER=0
@echo 9. Check that 'make && make install && make test' succeed with unpacked tarballs even without Internet access.
@echo 10. Follow packaging instructions in doc/build/distributing.md to create binary packages for all platforms
@echo 11. Upload to AWS, update https://julialang.org/downloads and http://status.julialang.org/stable links
@echo 12. Update checksums on AWS for tarball and packaged binaries
@echo 13. Update versions.json. Wait at least 60 minutes before proceeding to step 14.
@echo 14. Push to Juliaup (https://github.com/JuliaLang/juliaup/wiki/Adding-a-Julia-version)
@echo 15. Announce on mailing lists
@echo 16. Change master to release-0.X in base/version.jl and base/version_git.sh as in 4cb1e20
@echo
$(build_man1dir)/julia.1: $(JULIAHOME)/doc/man/julia.1 | $(build_man1dir)
@echo Copying in usr/share/man/man1/julia.1
@mkdir -p $(build_man1dir)
@cp $< $@
$(build_sysconfdir)/julia/startup.jl: $(JULIAHOME)/etc/startup.jl | $(build_sysconfdir)/julia
@echo Creating usr/etc/julia/startup.jl
@cp $< $@
$(build_datarootdir)/julia/julia-config.jl: $(JULIAHOME)/contrib/julia-config.jl | $(build_datarootdir)/julia
$(INSTALL_M) $< $(dir $@)
$(build_depsbindir)/stringreplace: $(JULIAHOME)/contrib/stringreplace.c | $(build_depsbindir)
@$(call PRINT_CC, $(HOSTCC) -o $(build_depsbindir)/stringreplace $(JULIAHOME)/contrib/stringreplace.c)
julia-base-cache: julia-sysimg-$(JULIA_BUILD_MODE) | $(DIRS) $(build_datarootdir)/julia
@JULIA_BINDIR=$(call cygpath_w,$(build_bindir)) WINEPATH="$(call cygpath_w,$(build_bindir));$$WINEPATH" \
$(call spawn, $(JULIA_EXECUTABLE) --startup-file=no $(call cygpath_w,$(JULIAHOME)/etc/write_base_cache.jl) \
$(call cygpath_w,$(build_datarootdir)/julia/base.cache))
# public libraries, that are installed in $(prefix)/lib
ifeq ($(JULIA_BUILD_MODE),release)
JL_TARGETS := julia
else ifeq ($(JULIA_BUILD_MODE),debug)
JL_TARGETS := julia-debug
endif
# private libraries, that are installed in $(prefix)/lib/julia
JL_PRIVATE_LIBS-0 := libccalltest libllvmcalltest
ifeq ($(JULIA_BUILD_MODE),release)
JL_PRIVATE_LIBS-0 += libjulia-internal libjulia-codegen
else ifeq ($(JULIA_BUILD_MODE),debug)
JL_PRIVATE_LIBS-0 += libjulia-internal-debug libjulia-codegen-debug
endif
ifeq ($(USE_GPL_LIBS), 1)
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBSUITESPARSE) += libamd libbtf libcamd libccolamd libcholmod libcolamd libklu libldl librbio libspqr libsuitesparseconfig libumfpack
endif
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBBLASTRAMPOLINE) += libblastrampoline
JL_PRIVATE_LIBS-$(USE_SYSTEM_PCRE) += libpcre2-8
JL_PRIVATE_LIBS-$(USE_SYSTEM_DSFMT) += libdSFMT
JL_PRIVATE_LIBS-$(USE_SYSTEM_GMP) += libgmp libgmpxx
JL_PRIVATE_LIBS-$(USE_SYSTEM_MPFR) += libmpfr
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBSSH2) += libssh2
JL_PRIVATE_LIBS-$(USE_SYSTEM_NGHTTP2) += libnghttp2
JL_PRIVATE_LIBS-$(USE_SYSTEM_MBEDTLS) += libmbedtls libmbedcrypto libmbedx509
JL_PRIVATE_LIBS-$(USE_SYSTEM_CURL) += libcurl
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBGIT2) += libgit2
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBUV) += libuv
ifeq ($(OS),WINNT)
JL_PRIVATE_LIBS-$(USE_SYSTEM_ZLIB) += zlib
else
JL_PRIVATE_LIBS-$(USE_SYSTEM_ZLIB) += libz
endif
ifeq ($(USE_LLVM_SHLIB),1)
JL_PRIVATE_LIBS-$(USE_SYSTEM_LLVM) += libLLVM $(LLVM_SHARED_LIB_NAME)
endif
JL_PRIVATE_LIBS-$(USE_SYSTEM_LIBUNWIND) += libunwind
ifeq ($(USE_SYSTEM_LIBM),0)
JL_PRIVATE_LIBS-$(USE_SYSTEM_OPENLIBM) += libopenlibm
endif
JL_PRIVATE_LIBS-$(USE_SYSTEM_BLAS) += $(LIBBLASNAME)
ifneq ($(LIBLAPACKNAME),$(LIBBLASNAME))
JL_PRIVATE_LIBS-$(USE_SYSTEM_LAPACK) += $(LIBLAPACKNAME)
endif
JL_PRIVATE_LIBS-$(USE_SYSTEM_CSL) += libgfortran libquadmath libstdc++ libgcc_s libgomp libssp libatomic
ifeq ($(OS),Darwin)
JL_PRIVATE_LIBS-$(USE_SYSTEM_CSL) += libc++
endif
ifeq ($(OS),WINNT)
JL_PRIVATE_LIBS-$(USE_SYSTEM_CSL) += libwinpthread
else
JL_PRIVATE_LIBS-$(USE_SYSTEM_CSL) += libpthread
endif
ifeq ($(SANITIZE),1)
ifeq ($(USECLANG),1)
JL_PRIVATE_LIBS-1 += libclang_rt.asan
else
JL_PRIVATE_LIBS-1 += libasan
endif
endif
ifeq ($(WITH_TRACY),1)
JL_PRIVATE_LIBS-0 += libTracyClient
endif
ifeq ($(OS),Darwin)
ifeq ($(USE_SYSTEM_BLAS),1)
ifeq ($(USE_SYSTEM_LAPACK),0)
JL_PRIVATE_LIBS-0 += libgfortblas
endif
endif
endif
# Note that we disable MSYS2's path munging here, as otherwise
# it replaces our `:`-separated list as a `;`-separated one.
define stringreplace
MSYS2_ARG_CONV_EXCL='*' $(build_depsbindir)/stringreplace $$(strings -t x - '$1' | grep "$2" | awk '{print $$1;}') "$3" 255 "$(call cygpath_w,$1)"
endef
install: $(build_depsbindir)/stringreplace docs
@$(MAKE) $(QUIET_MAKE) $(JULIA_BUILD_MODE)
@for subdir in $(bindir) $(datarootdir)/julia/stdlib/$(VERSDIR) $(docdir) $(man1dir) $(includedir)/julia $(libdir) $(private_libdir) $(sysconfdir) $(private_libexecdir); do \
mkdir -p $(DESTDIR)$$subdir; \
done
$(INSTALL_M) $(JULIA_EXECUTABLE_$(JULIA_BUILD_MODE)) $(DESTDIR)$(bindir)/
ifeq ($(OS),WINNT)
-$(INSTALL_M) $(wildcard $(build_bindir)/*.dll) $(DESTDIR)$(bindir)/
ifeq ($(JULIA_BUILD_MODE),release)
-$(INSTALL_M) $(build_libdir)/libjulia.dll.a $(DESTDIR)$(libdir)/
-$(INSTALL_M) $(build_libdir)/libjulia-internal.dll.a $(DESTDIR)$(libdir)/
else ifeq ($(JULIA_BUILD_MODE),debug)
-$(INSTALL_M) $(build_libdir)/libjulia-debug.dll.a $(DESTDIR)$(libdir)/
-$(INSTALL_M) $(build_libdir)/libjulia-internal-debug.dll.a $(DESTDIR)$(libdir)/
endif
# We have a single exception; we want 7z.dll to live in private_libexecdir, not bindir, so that 7z.exe can find it.
-mv $(DESTDIR)$(bindir)/7z.dll $(DESTDIR)$(private_libexecdir)/
-$(INSTALL_M) $(build_bindir)/libopenlibm.dll.a $(DESTDIR)$(libdir)/
-$(INSTALL_M) $(build_libdir)/libssp.dll.a $(DESTDIR)$(libdir)/
# The rest are compiler dependencies, as an example memcpy is exported by msvcrt
# These are files from mingw32 and required for creating shared libraries like our caches.
-$(INSTALL_M) $(build_libdir)/libgcc_s.a $(DESTDIR)$(libdir)/
-$(INSTALL_M) $(build_libdir)/libgcc.a $(DESTDIR)$(libdir)/
-$(INSTALL_M) $(build_libdir)/libmsvcrt.a $(DESTDIR)$(libdir)/
else
# Copy over .dSYM directories directly for Darwin
ifneq ($(DARWIN_FRAMEWORK),1)
ifeq ($(OS),Darwin)
ifeq ($(JULIA_BUILD_MODE),release)
-cp -a $(build_libdir)/libjulia.*.dSYM $(DESTDIR)$(libdir)
-cp -a $(build_libdir)/libjulia-internal.*.dSYM $(DESTDIR)$(private_libdir)
-cp -a $(build_libdir)/libjulia-codegen.*.dSYM $(DESTDIR)$(private_libdir)
-cp -a $(build_private_libdir)/sys.dylib.dSYM $(DESTDIR)$(private_libdir)
else ifeq ($(JULIA_BUILD_MODE),debug)
-cp -a $(build_libdir)/libjulia-debug.*.dSYM $(DESTDIR)$(libdir)
-cp -a $(build_libdir)/libjulia-internal-debug.*.dSYM $(DESTDIR)$(private_libdir)
-cp -a $(build_libdir)/libjulia-codegen-debug.*.dSYM $(DESTDIR)$(private_libdir)
-cp -a $(build_private_libdir)/sys-debug.dylib.dSYM $(DESTDIR)$(private_libdir)
endif
endif
# Copy over shared library file for libjulia.*
for suffix in $(JL_TARGETS) ; do \
for lib in $(build_libdir)/lib$${suffix}.*$(SHLIB_EXT)*; do \
if [ "$${lib##*.}" != "dSYM" ]; then \
$(INSTALL_M) $$lib $(DESTDIR)$(libdir) ; \
fi \
done \
done
else
# libjulia in Darwin framework has special location and name
ifeq ($(JULIA_BUILD_MODE),release)
$(INSTALL_M) $(build_libdir)/libjulia.$(SOMAJOR).$(SOMINOR).dylib $(DESTDIR)$(prefix)/$(framework_dylib)
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/$(FRAMEWORK_NAME).dSYM $(DESTDIR)$(prefix)/$(framework_dylib)
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/sys.dylib.dSYM $(build_private_libdir)/sys.dylib
else ifeq ($(JULIA_BUILD_MODE),debug)
$(INSTALL_M) $(build_libdir)/libjulia-debug.$(SOMAJOR).$(SOMINOR).dylib $(DESTDIR)$(prefix)/$(framework_dylib)_debug
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/$(FRAMEWORK_NAME)_debug.dSYM $(DESTDIR)$(prefix)/$(framework_dylib)_debug
@$(DSYMUTIL) -o $(DESTDIR)$(prefix)/$(framework_resources)/sys-debug.dylib.dSYM $(build_private_libdir)/sys-debug.dylib
endif
endif
for suffix in $(JL_PRIVATE_LIBS-0) ; do \
for lib in $(build_libdir)/$${suffix}.*$(SHLIB_EXT)*; do \
if [ "$${lib##*.}" != "dSYM" ]; then \
$(INSTALL_M) $$lib $(DESTDIR)$(private_libdir) ; \
fi \
done \
done
for suffix in $(JL_PRIVATE_LIBS-1) ; do \
for lib in $(build_private_libdir)/$${suffix}.$(SHLIB_EXT)*; do \
if [ "$${lib##*.}" != "dSYM" ]; then \
$(INSTALL_M) $$lib $(DESTDIR)$(private_libdir) ; \
fi \
done \
done
endif
# Install `7z` into private_libexecdir
$(INSTALL_M) $(build_bindir)/7z$(EXE) $(DESTDIR)$(private_libexecdir)/
# Install `lld` into private_libexecdir
$(INSTALL_M) $(build_depsbindir)/lld$(EXE) $(DESTDIR)$(private_libexecdir)/
# Install `dsymutil` into private_libexecdir/
$(INSTALL_M) $(build_depsbindir)/dsymutil$(EXE) $(DESTDIR)$(private_libexecdir)/
# Copy public headers
cp -R -L $(build_includedir)/julia/* $(DESTDIR)$(includedir)/julia
# Copy system image
ifeq ($(JULIA_BUILD_MODE),release)
$(INSTALL_M) $(build_private_libdir)/sys.$(SHLIB_EXT) $(DESTDIR)$(private_libdir)
else ifeq ($(JULIA_BUILD_MODE),debug)
$(INSTALL_M) $(build_private_libdir)/sys-debug.$(SHLIB_EXT) $(DESTDIR)$(private_libdir)
endif
# Copy in all .jl sources as well
mkdir -p $(DESTDIR)$(datarootdir)/julia/base $(DESTDIR)$(datarootdir)/julia/test
cp -R -L $(JULIAHOME)/base/* $(DESTDIR)$(datarootdir)/julia/base
cp -R -L $(JULIAHOME)/test/* $(DESTDIR)$(datarootdir)/julia/test
cp -R -L $(build_datarootdir)/julia/* $(DESTDIR)$(datarootdir)/julia
# Copy documentation
cp -R -L $(BUILDROOT)/doc/_build/html $(DESTDIR)$(docdir)/
# Remove various files which should not be installed
-rm -f $(DESTDIR)$(datarootdir)/julia/base/version_git.sh
-rm -f $(DESTDIR)$(datarootdir)/julia/test/Makefile
-rm -f $(DESTDIR)$(datarootdir)/julia/base/*/source-extracted
-rm -f $(DESTDIR)$(datarootdir)/julia/base/*/build-configured
-rm -f $(DESTDIR)$(datarootdir)/julia/base/*/build-compiled
-rm -f $(DESTDIR)$(datarootdir)/julia/base/*/build-checked
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/source-extracted
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/build-configured
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/build-compiled
-rm -f $(DESTDIR)$(datarootdir)/julia/stdlib/$(VERSDIR)/*/build-checked
# Copy in beautiful new man page
$(INSTALL_F) $(build_man1dir)/julia.1 $(DESTDIR)$(man1dir)/
# Copy .desktop file
mkdir -p $(DESTDIR)$(datarootdir)/applications/
$(INSTALL_F) $(JULIAHOME)/contrib/julia.desktop $(DESTDIR)$(datarootdir)/applications/
# Install appdata file
mkdir -p $(DESTDIR)$(datarootdir)/appdata/
$(INSTALL_F) $(JULIAHOME)/contrib/julia.appdata.xml $(DESTDIR)$(datarootdir)/appdata/
# Update RPATH entries and JL_SYSTEM_IMAGE_PATH if $(private_libdir_rel) != $(build_private_libdir_rel)
ifneq ($(private_libdir_rel),$(build_private_libdir_rel))
ifeq ($(OS), Darwin)
ifneq ($(DARWIN_FRAMEWORK),1)
for j in $(JL_TARGETS) ; do \
install_name_tool -rpath @executable_path/$(build_private_libdir_rel) @executable_path/$(private_libdir_rel) $(DESTDIR)$(bindir)/$$j; \
install_name_tool -add_rpath @executable_path/$(build_libdir_rel) @executable_path/$(libdir_rel) $(DESTDIR)$(bindir)/$$j; \
done
endif
else ifneq (,$(findstring $(OS),Linux FreeBSD))
for j in $(JL_TARGETS) ; do \
$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN/$(private_libdir_rel):$$ORIGIN/$(libdir_rel)' $(DESTDIR)$(bindir)/$$j; \
done
endif
# Overwrite JL_SYSTEM_IMAGE_PATH in libjulia-internal
if [ "$(DARWIN_FRAMEWORK)" = "0" ]; then \
RELEASE_TARGET=$(DESTDIR)$(private_libdir)/libjulia-internal.$(SHLIB_EXT); \
DEBUG_TARGET=$(DESTDIR)$(private_libdir)/libjulia-internal-debug.$(SHLIB_EXT); \
else \
RELEASE_TARGET=$(DESTDIR)$(prefix)/$(framework_dylib); \
DEBUG_TARGET=$(DESTDIR)$(prefix)/$(framework_dylib)_debug; \
fi; \
if [ "$(JULIA_BUILD_MODE)" = "release" ]; then \
$(call stringreplace,$${RELEASE_TARGET},sys.$(SHLIB_EXT)$$,$(private_libdir_rel)/sys.$(SHLIB_EXT)); \
elif [ "$(JULIA_BUILD_MODE)" = "debug" ]; then \
$(call stringreplace,$${DEBUG_TARGET},sys-debug.$(SHLIB_EXT)$$,$(private_libdir_rel)/sys-debug.$(SHLIB_EXT)); \
fi;
endif
# Set rpath for libjulia-internal, which is moving from `../lib` to `../lib/julia`.
ifeq ($(OS), Darwin)
ifneq ($(DARWIN_FRAMEWORK),1)
ifeq ($(JULIA_BUILD_MODE),release)
install_name_tool -add_rpath @loader_path/$(reverse_private_libdir_rel)/ $(DESTDIR)$(private_libdir)/libjulia-internal.$(SHLIB_EXT)
install_name_tool -add_rpath @loader_path/$(reverse_private_libdir_rel)/ $(DESTDIR)$(private_libdir)/libjulia-codegen.$(SHLIB_EXT)
else ifeq ($(JULIA_BUILD_MODE),debug)
install_name_tool -add_rpath @loader_path/$(reverse_private_libdir_rel)/ $(DESTDIR)$(private_libdir)/libjulia-internal-debug.$(SHLIB_EXT)
install_name_tool -add_rpath @loader_path/$(reverse_private_libdir_rel)/ $(DESTDIR)$(private_libdir)/libjulia-codegen-debug.$(SHLIB_EXT)
endif
endif
else ifneq (,$(findstring $(OS),Linux FreeBSD))
ifeq ($(JULIA_BUILD_MODE),release)
$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN:$$ORIGIN/$(reverse_private_libdir_rel)' $(DESTDIR)$(private_libdir)/libjulia-internal.$(SHLIB_EXT)
$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN:$$ORIGIN/$(reverse_private_libdir_rel)' $(DESTDIR)$(private_libdir)/libjulia-codegen.$(SHLIB_EXT)
else ifeq ($(JULIA_BUILD_MODE),debug)
$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN:$$ORIGIN/$(reverse_private_libdir_rel)' $(DESTDIR)$(private_libdir)/libjulia-internal-debug.$(SHLIB_EXT)
$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN:$$ORIGIN/$(reverse_private_libdir_rel)' $(DESTDIR)$(private_libdir)/libjulia-codegen-debug.$(SHLIB_EXT)
endif
endif
# Fix rpaths for dependencies. This should be fixed in BinaryBuilder later.
ifeq ($(OS), Linux)
-$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN' $(DESTDIR)$(private_shlibdir)/libLLVM.$(SHLIB_EXT)
endif
ifneq ($(LOADER_BUILD_DEP_LIBS),$(LOADER_INSTALL_DEP_LIBS))
# Next, overwrite relative path to libjulia-internal in our loader if $$(LOADER_BUILD_DEP_LIBS) != $$(LOADER_INSTALL_DEP_LIBS)
ifeq ($(JULIA_BUILD_MODE),release)
$(call stringreplace,$(DESTDIR)$(shlibdir)/libjulia.$(JL_MAJOR_MINOR_SHLIB_EXT),$(LOADER_BUILD_DEP_LIBS)$$,$(LOADER_INSTALL_DEP_LIBS))
else ifeq ($(JULIA_BUILD_MODE),debug)
$(call stringreplace,$(DESTDIR)$(shlibdir)/libjulia-debug.$(JL_MAJOR_MINOR_SHLIB_EXT),$(LOADER_DEBUG_BUILD_DEP_LIBS)$$,$(LOADER_DEBUG_INSTALL_DEP_LIBS))
endif
endif
ifeq ($(OS),FreeBSD)
# On FreeBSD, remove the build's libdir from each library's RPATH
$(JULIAHOME)/contrib/fixup-rpath.sh "$(PATCHELF)" $(DESTDIR)$(libdir) $(build_libdir)
$(JULIAHOME)/contrib/fixup-rpath.sh "$(PATCHELF)" $(DESTDIR)$(private_libdir) $(build_libdir)
$(JULIAHOME)/contrib/fixup-rpath.sh "$(PATCHELF)" $(DESTDIR)$(bindir) $(build_libdir)
# Set libgfortran's RPATH to ORIGIN instead of GCCPATH. It's only libgfortran that
# needs to be fixed here, as libgcc_s and libquadmath don't have RPATHs set. If we
# don't set libgfortran's RPATH, it won't be able to find its friends on systems
# that don't have the exact GCC port installed used for the build.
for lib in $(DESTDIR)$(private_libdir)/libgfortran*$(SHLIB_EXT)*; do \
$(PATCHELF) $(PATCHELF_SET_RPATH_ARG) '$$ORIGIN' $$lib; \
done
endif
mkdir -p $(DESTDIR)$(sysconfdir)
cp -R $(build_sysconfdir)/julia $(DESTDIR)$(sysconfdir)/
ifeq ($(DARWIN_FRAMEWORK),1)
$(MAKE) -C $(JULIAHOME)/contrib/mac/framework frameworknoinstall
endif
distclean:
-rm -fr $(BUILDROOT)/julia-*.tar.gz $(BUILDROOT)/julia*.exe $(BUILDROOT)/julia-$(JULIA_COMMIT)
binary-dist: distclean
ifeq ($(USE_SYSTEM_BLAS),0)
ifeq ($(ISX86),1)
ifneq ($(OPENBLAS_DYNAMIC_ARCH),1)
@echo OpenBLAS must be rebuilt with OPENBLAS_DYNAMIC_ARCH=1 to use binary-dist target
@false
endif
endif
endif
ifeq ($(USE_BINARYBUILDER_OPENBLAS),0)
# https://github.com/JuliaLang/julia/issues/46579
USE_BINARYBUILDER_OBJCONV=0
endif
ifneq ($(prefix),$(abspath julia-$(JULIA_COMMIT)))
$(error prefix must not be set for make binary-dist)
endif
ifneq ($(DESTDIR),)
$(error DESTDIR must not be set for make binary-dist)
endif
@$(MAKE) -C $(BUILDROOT) -f $(JULIAHOME)/Makefile install
cp $(JULIAHOME)/LICENSE.md $(BUILDROOT)/julia-$(JULIA_COMMIT)
ifeq ($(OS), Linux)
# Copy over any bundled ca certs we picked up from the system during build
-cp $(build_datarootdir)/julia/cert.pem $(DESTDIR)$(datarootdir)/julia/
endif
ifeq ($(OS), WINNT)
cd $(BUILDROOT)/julia-$(JULIA_COMMIT)/bin && rm -f llvm* llc.exe lli.exe opt.exe LTO.dll bugpoint.exe macho-dump.exe
endif
cd $(BUILDROOT) && $(TAR) zcvf $(JULIA_BINARYDIST_FILENAME).tar.gz julia-$(JULIA_COMMIT)
exe:
# run Inno Setup to compile installer.
# Note that we disable MSYS2 path munging, as it interferes with the `/` options:
MSYS2_ARG_CONV_EXCL='*' $(call spawn,$(JULIAHOME)/dist-extras/inno/iscc.exe /DAppVersion=$(JULIA_VERSION) /DSourceDir="$(call cygpath_w,$(BUILDROOT)/julia-$(JULIA_COMMIT))" /DRepoDir="$(call cygpath_w,$(JULIAHOME))" /F"$(JULIA_BINARYDIST_FILENAME)" /O"$(call cygpath_w,$(BUILDROOT))" $(INNO_ARGS) $(call cygpath_w,$(JULIAHOME)/contrib/windows/build-installer.iss))
chmod a+x "$(BUILDROOT)/$(JULIA_BINARYDIST_FILENAME).exe"
app:
$(MAKE) -C contrib/mac/app
@mv contrib/mac/app/$(JULIA_BINARYDIST_FILENAME).dmg $(BUILDROOT)
darwinframework:
$(MAKE) -C $(JULIAHOME)/contrib/mac/framework
light-source-dist.tmp: docs
ifneq ($(BUILDROOT),$(JULIAHOME))
$(error make light-source-dist does not work in out-of-tree builds)
endif
# Save git information
-@$(MAKE) -C $(JULIAHOME)/base version_git.jl.phony
# Create file light-source-dist.tmp to hold all the filenames that go into the tarball
echo "base/version_git.jl" > light-source-dist.tmp
# Download all stdlibs and include the tarball filenames in light-source-dist.tmp
@$(MAKE) -C stdlib getall DEPS_GIT=0 USE_BINARYBUILDER=0
-ls stdlib/srccache/*.tar.gz >> light-source-dist.tmp
-ls stdlib/*/StdlibArtifacts.toml >> light-source-dist.tmp
# Include all git-tracked filenames
git ls-files >> light-source-dist.tmp
# Include documentation filenames
find doc/_build/html >> light-source-dist.tmp
# Make tarball with only Julia code + stdlib tarballs
light-source-dist: light-source-dist.tmp
# Prefix everything with "julia-$(commit-sha)/" or "julia-$(version)/" and then create tarball
# To achieve prefixing, we temporarily create a symlink in the source directory that points back
# to the source directory.
sed -e "s_.*_julia-${JULIA_COMMIT}/&_" light-source-dist.tmp > light-source-dist.tmp1
ln -s . julia-${JULIA_COMMIT}
tar -cz --no-recursion -T light-source-dist.tmp1 -f julia-$(JULIA_VERSION)_$(JULIA_COMMIT).tar.gz
rm julia-${JULIA_COMMIT}
source-dist:
@echo \'source-dist\' target is deprecated: use \'full-source-dist\' instead.
# Make tarball with Julia code plus all dependencies
full-source-dist: light-source-dist.tmp
# Get all the dependencies downloaded
@$(MAKE) -C deps getall DEPS_GIT=0 USE_BINARYBUILDER=0
# Create file full-source-dist.tmp to hold all the filenames that go into the tarball
cp light-source-dist.tmp full-source-dist.tmp
-ls deps/srccache/*.tar.gz deps/srccache/*.tar.bz2 deps/srccache/*.tar.xz deps/srccache/*.tgz deps/srccache/*.zip deps/srccache/*.pem >> full-source-dist.tmp
# Prefix everything with "julia-$(commit-sha)/" or "julia-$(version)/" and then create tarball
# To achieve prefixing, we temporarily create a symlink in the source directory that points back
# to the source directory.
sed -e "s_.*_julia-${JULIA_COMMIT}/&_" full-source-dist.tmp > full-source-dist.tmp1
ln -s . julia-${JULIA_COMMIT}
tar -cz --no-recursion -T full-source-dist.tmp1 -f julia-$(JULIA_VERSION)_$(JULIA_COMMIT)-full.tar.gz
rm julia-${JULIA_COMMIT}
clean: | $(CLEAN_TARGETS)
@-$(MAKE) -C $(BUILDROOT)/base clean
@-$(MAKE) -C $(BUILDROOT)/doc clean
@-$(MAKE) -C $(BUILDROOT)/src clean
@-$(MAKE) -C $(BUILDROOT)/cli clean
@-$(MAKE) -C $(BUILDROOT)/test clean
@-$(MAKE) -C $(BUILDROOT)/stdlib clean
-rm -f $(BUILDROOT)/julia
-rm -f $(BUILDROOT)/*.tar.gz
-rm -f $(build_depsbindir)/stringreplace \
$(BUILDROOT)/light-source-dist.tmp $(BUILDROOT)/light-source-dist.tmp1 \
$(BUILDROOT)/full-source-dist.tmp $(BUILDROOT)/full-source-dist.tmp1
-rm -fr $(build_private_libdir)
# Teporarily add this line to the Makefile to remove extras
-rm -fr $(build_datarootdir)/julia/extras
cleanall: clean
@-$(MAKE) -C $(BUILDROOT)/src clean-flisp clean-support
@-$(MAKE) -C $(BUILDROOT)/deps clean-libuv
-rm -fr $(build_prefix) $(build_staging)
distcleanall: cleanall
@-$(MAKE) -C $(BUILDROOT)/stdlib distclean
@-$(MAKE) -C $(BUILDROOT)/deps distcleanall
@-$(MAKE) -C $(BUILDROOT)/doc cleanall
.FORCE:
.PHONY: .FORCE default debug release check-whitespace release-candidate \
julia-debug julia-release julia-stdlib julia-deps julia-deps-libs \
julia-cli-release julia-cli-debug julia-src-release julia-src-debug \
julia-symlink julia-base julia-sysimg julia-sysimg-ji julia-sysimg-release julia-sysimg-debug \
test testall testall1 test \
clean distcleanall cleanall $(CLEAN_TARGETS) \
run-julia run-julia-debug run-julia-release run \
install binary-dist light-source-dist.tmp light-source-dist \
dist full-source-dist source-dist
test: check-whitespace $(JULIA_BUILD_MODE)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test default JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
testall: check-whitespace $(JULIA_BUILD_MODE)
cp $(JULIA_SYSIMG) $(BUILDROOT)/local.$(SHLIB_EXT)
$(call spawn,$(JULIA_EXECUTABLE) -J $(call cygpath_w,$(BUILDROOT)/local.$(SHLIB_EXT)) -e 'true')
rm $(BUILDROOT)/local.$(SHLIB_EXT)
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test all JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
testall1: check-whitespace $(JULIA_BUILD_MODE)
@env JULIA_CPU_THREADS=1 $(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test all JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
test-%: check-whitespace $(JULIA_BUILD_MODE) .FORCE
@([ $$(( $$(date +%s) - $$(date -r $(build_private_libdir)/sys.$(SHLIB_EXT) +%s) )) -le 100 ] && \
printf '\033[93m HINT The system image was recently rebuilt. Are you aware of the test-revise-* targets? See CONTRIBUTING.md. \033[0m\n') || true
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test $* JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
test-revise-%: .FORCE
@$(MAKE) $(QUIET_MAKE) -C $(BUILDROOT)/test revise-$* JULIA_BUILD_MODE=$(JULIA_BUILD_MODE)
# download target for some hardcoded windows dependencies
.PHONY: win-extras wine_path
win-extras:
@$(MAKE) -C $(BUILDROOT)/deps install-p7zip
mkdir -p $(JULIAHOME)/dist-extras
cd $(JULIAHOME)/dist-extras && \
$(JLDOWNLOAD) https://www.jrsoftware.org/download.php/is.exe && \
chmod a+x is.exe && \
MSYS2_ARG_CONV_EXCL='*' $(call spawn, $(JULIAHOME)/dist-extras/is.exe /DIR="$(call cygpath_w,$(JULIAHOME)/dist-extras/inno)" /PORTABLE=1 /CURRENTUSER /VERYSILENT)
# various statistics about the build that may interest the user
ifeq ($(USE_SYSTEM_LLVM), 1)
LLVM_SIZE := llvm-size$(EXE)
else
LLVM_SIZE := $(build_depsbindir)/llvm-size$(EXE)
endif
build-stats:
ifeq ($(USE_BINARYBUILDER_LLVM),1)
@$(MAKE) -C deps install-llvm-tools
endif
@printf $(JULCOLOR)' ==> ./julia binary sizes\n'$(ENDCOLOR)
$(call spawn,$(LLVM_SIZE) -A $(call cygpath_w,$(build_private_libdir)/sys.$(SHLIB_EXT)) \
$(call cygpath_w,$(build_shlibdir)/libjulia.$(SHLIB_EXT)) \
$(call cygpath_w,$(build_bindir)/julia$(EXE)))
@printf $(JULCOLOR)' ==> ./julia launch speedtest\n'$(ENDCOLOR)
@time $(call spawn,$(build_bindir)/julia$(EXE) -e '')
@time $(call spawn,$(build_bindir)/julia$(EXE) -e '')
@time $(call spawn,$(build_bindir)/julia$(EXE) -e '')
print-locale:
@locale
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...