Revision a62e5871069f958e6f54e20349c253f3d8a63b0f authored by alex@thinkpad on 26 September 2018, 06:22:01 UTC, committed by alex@thinkpad on 26 September 2018, 06:22:01 UTC
https://www.magiclantern.fm/forum/index.php?topic=5601.msg206383#msg206383
1 parent 13b9395
README.user
***************************************************
* *
* THIS IS DANGEROUS AND MIGHT DAMAGE YOUR CAMERA. *
* NO WARRANTIES. NO GUARANTEES. DO NOT TAUNT. *
* *
***************************************************
If you are not comfortable with this, stop reading and delete the
software before you are tempted to try running it on your camera.
Please read the user guide carefully before installing this software.
To repeat this important point:
***************************************************
* *
* THIS IS DANGEROUS AND MIGHT DAMAGE YOUR CAMERA. *
* IF IT BREAKS, YOU GET TO KEEP BOTH PIECES. *
* *
***************************************************
IMPORTANT NOTES
* If you have a bootable CF/SD card and have the DISKBOOT flag
set in the camera (which the installer does), and you do not
have an AUTOEXEC.BIN file on the card the camera WILL NOT BOOT.
It will hang and not wake up until the battery is removed.
* If you encounter a "locked up" camera, quickly remove the battery.
Otherwise the ARM might be in a tight-loop and get very hot, very quickly.
Your battery will run down and your LCD might show some discoloration.
* When in doubt, remove the battery and reboot.
* And, remember that this software can damage or destroy your camera.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...