0622f1b | Kai Muehlbauer | 26 February 2014, 13:28:23 UTC | ENH: added example files for plot_cg_ppi and plot_cg_rhi added simple h5 file with rhi data | 26 February 2014, 13:28:23 UTC |
f79778f | Kai Muehlbauer | 26 February 2014, 13:23:08 UTC | ENH: Introduction of new plotting routines plot_cg_ppi and plot_cg_rhi Data is plotted on a curvilinear grid. | 26 February 2014, 13:23:08 UTC |
b8e2613 | heisterm | 20 February 2014, 11:03:28 UTC | DOC: Removed from Gettig Started installation instructions everything that refers to the BUFR software. This is because BUFR software is now an optional dependency, so users shoudl not be bothered with it during regular installation. | 20 February 2014, 11:03:28 UTC |
52ded9b | heisterm | 20 February 2014, 10:48:50 UTC | DOC: Minor typo. | 20 February 2014, 10:48:50 UTC |
62cffc4 | heisterm | 20 February 2014, 10:44:37 UTC | DOC: Referred to the doc section about optional imports in the exception raised by class OptionalModuleStub. | 20 February 2014, 10:44:37 UTC |
1625f9f | heisterm | 20 February 2014, 10:44:09 UTC | DOC: Added a doc sub-section "Optional Dependencies" to the "Getting Started" section. Please beware that the content of this section is preliminary. We need to add more info o how to install the BUFR module. In tzhe future, we need to take care of keeping this section in sync with any additonal optional imports we add to the wradlib code. | 20 February 2014, 10:44:09 UTC |
def79b6 | Thomas Pfaff | 20 February 2014, 09:46:16 UTC | DOC: introduced a more telling default mode for correctAttenuationHB. Changed the docstring accordingly | 20 February 2014, 09:46:16 UTC |
615adf1 | Thomas Pfaff | 20 February 2014, 09:43:41 UTC | FIX: fixed a bug in correctAttenuationHB. - the checks for attenuation overflow looked at the wrong gate - the 'nan' and 'zero' mode assigned their values to the wrong gate | 20 February 2014, 09:43:41 UTC |
2f743b4 | heisterm | 19 February 2014, 14:27:12 UTC | DOC: Clarified the new behaviour of read_RADOLAN_composite in the function docstring. | 19 February 2014, 14:27:12 UTC |
1180a57 | Thomas Pfaff | 18 February 2014, 16:51:51 UTC | ENH: refined optional_import to allow global imports. function now always returns an object (the actual module on success, a stub object on failure), so that imports may also be done globally without breaking the code on a failed import. The lazy import will be revealed as soon as any attribute is requested from the stub object. This way failed optional imports won't clutter your command window with warnings but will give you a clear error message, once you try to access the contents of the missing module. | 18 February 2014, 16:51:51 UTC |
9a8f6c8 | heisterm | 18 February 2014, 16:03:33 UTC | MIN: Some minor edits in the use of the deprecated decorator. | 18 February 2014, 16:03:33 UTC |
d5f7850 | heisterm | 18 February 2014, 15:44:22 UTC | DOC: Removed reference to speedup from the module docstring. Some other minor edits in the module docstring. | 18 February 2014, 15:44:22 UTC |
597d455 | heisterm | 18 February 2014, 15:42:00 UTC | MIN: Marked several functions as depercated in the dp module. The functions are fill_phidp and process_raw_phidp. | 18 February 2014, 15:42:00 UTC |
cefd293 | heisterm | 18 February 2014, 15:38:22 UTC | MIN: Marked several functions as deprecated in the vis module using the new decorator. Decorated as deprecated are: PolarPlot --> replaced by plot_ppi polar_plot2 --> replaced by plot_ppi polar_plot --> replaced by plot_ppi CartesianPlot --> no replacement cartesian_plot --> no replacement polar_plot and cartesian_plot are no longer exposed by the module documentation. There are other functions in vis for which we should think about the future status. | 18 February 2014, 15:38:22 UTC |
67842b3 | heisterm | 18 February 2014, 15:29:31 UTC | ENH: Added a deprecation decorator function in the util module. The decorator can be used in order to mark deprecated functions. If these functions are called, a DeprecationWarning will be raised. In order to use the decorator, just >>> from util import deprecated >>> @deprecated() ... def foo(x) ... return(x) | 18 February 2014, 15:29:31 UTC |
71ae9a3 | heisterm | 18 February 2014, 13:12:05 UTC | MIN: Release version is now specified in text file version, not in setup.py anymore. | 18 February 2014, 13:12:05 UTC |
6ae8df3 | heisterm | 18 February 2014, 13:05:53 UTC | REF: Removed anything related to the BUFR software from wradlib setup. Now, wradlib should install as a pure python package. | 18 February 2014, 13:05:53 UTC |
967f64a | heisterm | 18 February 2014, 12:46:19 UTC | MIN: In the global section of module bufr, we now check whether the BUFR software is operational. If it turns out that the BUFR software (mainly decbufr) is not operational on that system, module bufr will raise an ImportError. In that case, util.import_optional will raise an exception. This change was made to allow for optional import of the BUFR module. | 18 February 2014, 12:46:19 UTC |
d4165fe | heisterm | 18 February 2014, 12:05:17 UTC | MIN: The import of the bufr module is now via lazy loading in read_BUFR in module io. The global import of the bufr module in the io module was removed. | 18 February 2014, 12:05:17 UTC |
27b1ba1 | heisterm | 18 February 2014, 12:04:01 UTC | FIX: Fixed an error in the call of import_optional | 18 February 2014, 12:04:01 UTC |
bd9360f | heisterm | 18 February 2014, 11:17:34 UTC | MIN: removed import of module bufr from module __init__. | 18 February 2014, 11:17:34 UTC |
b10da93 | heisterm | 18 February 2014, 11:14:39 UTC | MIN: Using lazy loading and optional import for the speedup module in module dp. This means the dp does not try anymore to globally import speedup. Insstead, speedup is imported by util.import_optional within the function dp.unfold_phi. No change in behaviour, execpt no warning will show if you run dp but not use dp.unfold_phi. | 18 February 2014, 11:14:39 UTC |
3cd1f1c | heisterm | 18 February 2014, 11:11:38 UTC | ENH: First prototype of optional_import function in module util to facilitate lazy loading of optional modules. This porottype will be refined, soon. | 18 February 2014, 11:11:38 UTC |
dca27eb | heisterm | 18 February 2014, 11:10:37 UTC | REF: Removed all "from module import *" statements that import funcitons directly into the wradlib namespace. This requries refactoring of all code that calls wradlib funcitons directly from the wradlib namespace instead of from the corresponding modules. So code such as >>> wradlib.readDX(f) will not work anymore. Instead, you need to specifiy the module by >>> wradlib.io.readDX(f) This change is a necessary requirement to have a better namespace hygiene. | 18 February 2014, 11:10:37 UTC |
92ceb39 | heisterm | 18 February 2014, 08:18:27 UTC | MIN: Modification of aggregate_equidistant_tseries in module util. The function was changed in a way that we now check for each target time interval whether source and target time specs are consistent. If they are not, the target value for that target interval will be NaN. Bfore that change, the entire target series was set to NaN if the specs for only one target interval was inconsistent. | 18 February 2014, 08:18:27 UTC |
cad11e3 | heisterm | 18 February 2014, 07:46:04 UTC | DOC: Minor documentation edits in dp module overview. | 18 February 2014, 07:46:04 UTC |
a147b29 | heisterm | 28 January 2014, 08:07:15 UTC | DOC: Fix in dp doc. | 28 January 2014, 08:07:15 UTC |
46faf60 | heisterm | 28 January 2014, 08:05:41 UTC | DOC: Minor changes in dp documentation. | 28 January 2014, 08:05:41 UTC |
e045128 | Thomas Pfaff | 23 January 2014, 10:35:01 UTC | FIX: changed order of dimension slices. Fixes issue #16 The recipe had not been updated to reflect the change in coordinate dimension order convention for 3-D data. | 23 January 2014, 10:35:01 UTC |
1ad733f | Thomas Pfaff | 22 January 2014, 10:27:10 UTC | FIX: removed assertion to avoid errors with new DX-files. Apparently the DX-format writers at the DWD have a strange way to calculate product length. It looks like the 0x03 character used to separate the header from the data is not counted, or counted once too many or, I don't know. Fact is, you can have every combination of even and odd byte length header and even or odd byte length data section. However the data must be even length and apparently it doesn't hurt to read one byte less than implied by product-length - header-length, so that's going to be the way we move forward. | 22 January 2014, 10:27:10 UTC |
79ed503 | heisterm | 21 January 2014, 16:01:05 UTC | FIX: pia_from_kdp did not consider gate length when computing PIA from KDP. | 21 January 2014, 16:01:05 UTC |
d6fe311 | heisterm | 21 January 2014, 15:55:31 UTC | FIX: pia_from_kdp did not consider gate length when computing PIA from KDP. | 21 January 2014, 15:55:31 UTC |
28fdd38 | Stephan Jacobi | 20 January 2014, 12:12:36 UTC | FIX: in correctAttenuationConstrained2-Function, where reference-pia interpolation and pia-calculation in small sectors of incorrect beams only takes place now, if they exist indeed; - changed internal variabel name invalidbeams -> small_sectors for better understanding - minor documentation changes | 20 January 2014, 12:12:36 UTC |
b428033 | Thomas Pfaff | 20 January 2014, 11:08:50 UTC | ENH: made plot_ppi always return axes with equal aspect (avoiding radar 'eggs'). | 20 January 2014, 11:08:50 UTC |
cb6716e | Thomas Pfaff | 20 January 2014, 11:07:21 UTC | MIN: minor code beautifications. | 20 January 2014, 11:07:21 UTC |
40f6f89 | Thomas Pfaff | 16 January 2014, 08:58:53 UTC | ENH: added examples for the new plot_ppi routine | 16 January 2014, 08:58:53 UTC |
e7fbf81 | Thomas Pfaff | 16 January 2014, 08:58:53 UTC | NEW: Added function vis.ppi_plot_crosshair | 16 January 2014, 08:58:53 UTC |
57c04ae | Thomas Pfaff | 17 January 2014, 07:55:53 UTC | DOC: added some in-code documentation to vis.plot_ppi and vis.plot_rhi | 17 January 2014, 07:55:53 UTC |
8beb473 | Thomas Pfaff | 16 January 2014, 08:58:53 UTC | ENH: Added ability to georeference and project coordinates in plot_ppi. | 16 January 2014, 08:58:53 UTC |
99cc86b | Thomas Pfaff | 16 January 2014, 08:58:53 UTC | NEW: Introduced functions plot_ppi and plot_rhi. These functions plot data assumed to be in the radar polar coordinate system directly on a cartesian matplotlib axes, allowing zooming and easier additions of other data. | 16 January 2014, 08:58:53 UTC |
39c698e | Thomas Pfaff | 14 January 2014, 16:15:59 UTC | Merged in kai_muehlbauer/wradlib_miub (pull request #13) Minor changes in cg_plot and GAMIC hdf reader | 14 January 2014, 16:15:59 UTC |
6b77d61 | heisterm | 13 January 2014, 13:52:44 UTC | Merged in thpfaff/wradlib (pull request #12) ENH: Introduced polar2latlonalt_n and helper functions. | 13 January 2014, 13:52:44 UTC |
956ba1f | Thomas Pfaff | 10 January 2014, 10:14:52 UTC | FIX: changes to readDX, fixes issue #4 - fully interpret and return the header information - read only the amount of data indicated by the header regardless of file size - remove static truncation to 128 range bins | 10 January 2014, 10:14:52 UTC |
0d5c87d | Thomas Pfaff | 07 January 2014, 11:23:13 UTC | FIX: changed import datatype in read_radolan_composite to uint16 and added type cast in order to avoid problems similar to those reading RX-data | 07 January 2014, 11:23:13 UTC |
a8f45c5 | heisterm | 20 December 2013, 14:59:35 UTC | MIN: removed rho as argument from process_raw_phidp_vulpiani because it is not used anymore. | 20 December 2013, 14:59:35 UTC |
dc12d08 | Kai Mühlbauer | 20 December 2013, 11:10:27 UTC | wradlib/wradlib mit default zusammengeführt | 20 December 2013, 11:10:27 UTC |
889dfef | heisterm | 20 December 2013, 10:08:48 UTC | FIX: Fixed an error related to the window length in the finite difference scheme of kdp_from_phidp_finitediff. | 20 December 2013, 10:08:48 UTC |
2dbe300 | Kai Mühlbauer | 20 December 2013, 07:01:11 UTC | wradlib/wradlib mit default zusammengeführt | 20 December 2013, 07:01:11 UTC |
15c9c39 | heisterm | 19 December 2013, 13:37:17 UTC | FIX: Removed several bugs from new function process_raw_phidp_vulpiani in module dp. | 19 December 2013, 13:37:17 UTC |
cb62dcd | heisterm | 19 December 2013, 12:04:50 UTC | REF: A lot of formal changes in the dp module including renaming of functions and an enhancement of process_raw_phidp2. Providing more informative function names kdp_from_phidp --> kdp_from_phidp_finitediff kdp_from_phidp2 --> kdp_from_phidp_linregress kdp_from_phidp3 --> kdp_from_phidp_sobel kdp_from_phidp4 --> kdp_from_phidp_convolution process_raw_phidp2 --> process_raw_phidp_vulpiani process_raw_phidp_vulpiani now also does the iterative phdp kdp estimation. The number of iterations is given by argument niter. The function now also returns the kdp array that corresponds to phidp. | 19 December 2013, 12:04:50 UTC |
41b9ba2 | heisterm | 18 December 2013, 16:41:34 UTC | ENH: Added function aggregate_equidistant_tseries to util module. This function aggregates time series data under the assumption that the source and the target time series are equidistant, and that the source time steps regularly fit into the target time steps (no shifts at the boundaries). This is the most trivial aggregation scenario. However, the function allows for gaps in the source data. This means, we assume the data to be equidistant (each item represents a time step with the same length), but it does not need to be contiguous. NaN values in the source data are allowed, too. The output, though, will be a contiguous time series. This series will have NaN values for those target time steps which were not sufficiently supported by source data. The decision whether the support was "sufficient" is based on the argument *minpercvalid*. This argument specifies the minimum percentage of valid source time steps inside one target time step (valid meaning not NaN and not missing) which is required to compute an aggregate. The default value of minpercvalid is 100 percent. This means no gaps are allowed, and a target time step will be NaN if only one source time step is missing. Aggregation methods at the moment are "sum" and "mean" of the source data. | 18 December 2013, 16:41:34 UTC |
f0b75f3 | Thomas Pfaff | 18 December 2013, 15:22:42 UTC | ENH: Added function timestamp2index, which allows to calculate indices of an equidistant time series from time information (human readable strings or python datetime/timedelta objects). ... and helper functions. | 18 December 2013, 15:22:42 UTC |
2274741 | Kai Mühlbauer | 18 December 2013, 08:17:57 UTC | wradlib/wradlib mit default zusammengeführt | 18 December 2013, 08:17:57 UTC |
52e5e57 | heisterm | 18 December 2013, 08:11:21 UTC | MIN: Passing the window size for KDP retrieval consistently as a kwarg in process_raw_phidp2. | 18 December 2013, 08:11:21 UTC |
ffb3d93 | heisterm | 18 December 2013, 08:07:43 UTC | MIN: Some minor changes in ErrorMetrics. Including that (i) pbias is now computed in percent as it should, (ii) pbias is reported by default, (iii) avoiding reports and plot attempts of no valid pairs of obs and est are available. | 18 December 2013, 08:07:43 UTC |
97e8eac | heisterm | 18 December 2013, 08:05:22 UTC | MIN: Removed a minor TODO warning that is always and annoyingly printed to the screen. | 18 December 2013, 08:05:22 UTC |
9ff76f4 | Kai Muehlbauer | 18 December 2013, 07:53:05 UTC | MIN: cg_plot.colorbar routine added check for integer/real numbers for proper display of ticklabels | 18 December 2013, 07:53:05 UTC |
29e67f0 | Kai Mühlbauer | 18 December 2013, 07:25:10 UTC | wradlib/wradlib mit default zusammengeführt | 18 December 2013, 07:25:10 UTC |
0b8893e | Thomas Pfaff | 18 December 2013, 07:23:11 UTC | Merged in kai_muehlbauer/wradlib_miub (pull request #11) #11: Improvement io.py - read generic hdf5 | 18 December 2013, 07:23:11 UTC |
9814d26 | Thomas Pfaff | 17 December 2013, 15:54:22 UTC | MIN: one last cleanup. | 17 December 2013, 15:54:22 UTC |
16ea87c | Thomas Pfaff | 17 December 2013, 15:53:59 UTC | FIX: made read_RADOLAN_composite return its data properly multiplied by the precision factor found in the header. This is a major change in behavior! Even though it may be considered as a bug fix it will break code for most users who worked with this function (and around the bug) so far. | 17 December 2013, 15:53:59 UTC |
6445ce3 | Thomas Pfaff | 17 December 2013, 15:50:30 UTC | FIX: made read_RADOLAN_composite close its opened file. | 17 December 2013, 15:50:30 UTC |
77a5c85 | Thomas Pfaff | 17 December 2013, 15:49:05 UTC | ENH: introduced missing keyword to read_RADOLAN_composite. To avoid hardcoded values as much as possible | 17 December 2013, 15:49:05 UTC |
5ca2e4f | Thomas Pfaff | 17 December 2013, 15:47:16 UTC | ENH: made parsing of header info more independent from individual locations (as recommended in the latest RADOLAN composite format documentation [v2.2.2]) | 17 December 2013, 15:47:16 UTC |
391f91f | Thomas Pfaff | 17 December 2013, 15:45:04 UTC | MIN: Some code beautifications | 17 December 2013, 15:45:04 UTC |
bbc9618 | Thomas Pfaff | 17 December 2013, 15:44:08 UTC | ENH: changed print statements inside read_RADOLAN_composite to warnings | 17 December 2013, 15:44:08 UTC |
0f7c8b5 | Thomas Pfaff | 16 December 2013, 15:24:10 UTC | FIX: added radar height to final altitude | 16 December 2013, 15:24:10 UTC |
6061b34 | Thomas Pfaff | 16 December 2013, 15:09:43 UTC | DOC: Updated doctests for polar2latlonalt and polar2latlonalt_n | 16 December 2013, 15:09:43 UTC |
ad29cd6 | Thomas Pfaff | 16 December 2013, 15:08:46 UTC | FIX: hammered out one big bug | 16 December 2013, 15:08:46 UTC |
40420b6 | Thomas Pfaff | 16 December 2013, 15:07:54 UTC | ENH: made call signature of polar2latlonalt_n similar to that of polar2latlonalt | 16 December 2013, 15:07:54 UTC |
c752228 | Thomas Pfaff | 16 December 2013, 13:47:02 UTC | FIX: moved conversion of angles from degrees to radians, so that behavior is more intuitive (working with degrees on the user side, and thus actually following the documentation). | 16 December 2013, 13:47:02 UTC |
da9a659 | Thomas Pfaff | 13 December 2013, 15:02:41 UTC | ENH: Introduced polar2latlonalt_n and helper functions. calculates geographical (sphere based) coordinates from radar coordinates, taking both earth's curvature and the refraction of radar beams in the air into account. | 13 December 2013, 15:02:41 UTC |
dcf1082 | Kai Mühlbauer | 11 December 2013, 10:07:25 UTC | wradlib/wradlib mit default zusammengeführt | 11 December 2013, 10:07:25 UTC |
36cf3a1 | Thomas Pfaff | 09 December 2013, 08:04:15 UTC | FIX: added conversion to 32-bit int for RX-data, because otherwise the data type of the array would not be sufficient to store -9999 nodata values. | 09 December 2013, 08:04:15 UTC |
a5a050e | Thomas Pfaff | 09 December 2013, 08:02:09 UTC | DOC: minor fixes | 09 December 2013, 08:02:09 UTC |
b504b44 | heisterm | 06 December 2013, 16:59:49 UTC | FIX: Fixed wrong datetime interpretation in RADOLAN composite and added new 150 km radius. | 06 December 2013, 16:59:49 UTC |
4801304 | heisterm | 18 November 2013, 15:59:53 UTC | MIN: Trying to make MFB adjustment more robust. Before an adjusment facator is computed, we fit a linear regression and evaluate slope, p-value and correlation. We compute an adjustment factor only if a strong relationship is indicated (slope > 0.1, r > 0.5, p < 0.01). These thresholds might later be made available as function arguments. | 18 November 2013, 15:59:53 UTC |
a9781f7 | heisterm | 18 November 2013, 15:57:26 UTC | MIN: removed the range_lim argument from read_EDGE_netcdf. Limiting the range is something tpo be done outsode the reading function. Now, the entire range is returned. | 18 November 2013, 15:57:26 UTC |
e094a2e | heisterm | 12 November 2013, 14:43:29 UTC | MIN: Introducing exception handling for reading input files in read_EDGE_netcdf. The aim is to at least close files if an error occus during reading, using try except finally. This might be a model for all input functions. The exception will be raised (or can be caught outside the function), but the file will be closed if it was successfully opened. | 12 November 2013, 14:43:29 UTC |
9844826 | heisterm | 12 November 2013, 10:28:57 UTC | FIX: Passing range length to sub-functions within process_raw_phidp2. | 12 November 2013, 10:28:57 UTC |
a949455 | Kai Mühlbauer | 08 November 2013, 07:01:24 UTC | wradlib/wradlib mit default zusammengeführt | 08 November 2013, 07:01:24 UTC |
d1cc60d | heisterm | 07 November 2013, 15:42:25 UTC | ENH: Added new functions for PhiDP reconstruction based on Vulpiani (2012). The functions involve unfold_phidp_2 and a new convenience function process_raw_phidp2. Once we know more about the behaviour of these function, it will be time to clean up the dp module a little. | 07 November 2013, 15:42:25 UTC |
74d7979 | heisterm | 07 November 2013, 14:30:38 UTC | FIX: adding dr to argument list of kdp_from_phidp. | 07 November 2013, 14:30:38 UTC |
1df5c17 | Kai Mühlbauer | 07 November 2013, 12:58:11 UTC | wradlib/wradlib mit default zusammengeführt | 07 November 2013, 12:58:11 UTC |
0ff9297 | heisterm | 07 November 2013, 12:48:15 UTC | ENH: Added fourth experimental Kdp retrieval based on convolution filter suggested by Kai Mühlbauer. The function is named kdp_from_phidp4. It also takes care of remaining NaN values. If phidp does not contain NaNs, only the convolution filter is applied. | 07 November 2013, 12:48:15 UTC |
b1e8d66 | Kai Mühlbauer | 07 November 2013, 10:16:16 UTC | wradlib/wradlib mit default zusammengeführt | 07 November 2013, 10:16:16 UTC |
989640f | heisterm | 07 November 2013, 10:12:41 UTC | FIX: Fixing bug in handling the end of the beam in kdp_from_phidp2. Also inserted the explicit handling of start and end of the beam to kdp_from_phidp3. | 07 November 2013, 10:12:41 UTC |
d123bd8 | heisterm | 07 November 2013, 09:33:27 UTC | FIX: Accounting for forward/backward propagation effects in kdp_from_phidp2 and kdp_from_phidp3. | 07 November 2013, 09:33:27 UTC |
e71c619 | Kai Mühlbauer | 07 November 2013, 09:09:49 UTC | wradlib/wradlib mit default zusammengeführt | 07 November 2013, 09:09:49 UTC |
b408ddb | heisterm | 07 November 2013, 08:58:52 UTC | ENH: New experimental Kdp retrieval function kdp_from_phidp3. This function should be robust AND fast. For contiguous valid regions, it applies a sobel filter, for remaining NaN regions with valid neighbours it performs a local linear regression. Beyond, all the kdp_from_phidp functions now have an argument dr which specifies the gate length (in km). | 07 November 2013, 08:58:52 UTC |
980a7c9 | heisterm | 06 November 2013, 08:43:04 UTC | MIN: kdp_from_phidp2 now explicitely handles the start and the end of each beam. For the start and the end of the beam, we do not use a "central window" around a gate, but we use a forward window for the first L/2 gates and a backward window for the last L/2 gates. | 06 November 2013, 08:43:04 UTC |
8b0db86 | Kai Mühlbauer | 05 November 2013, 09:11:06 UTC | wradlib/wradlib mit default zusammengeführt | 05 November 2013, 09:11:06 UTC |
e3a9fca | heisterm | 05 November 2013, 08:50:37 UTC | ENH: Adding new experimental function for Kdp retrieval (kdp_from_phidp2). This function uses a moving window linear regression and should also work for data with gaps. STATUS is experimental. | 05 November 2013, 08:50:37 UTC |
f2ff0ab | heisterm | 05 November 2013, 08:48:16 UTC | FIX: Adapting VPR functions to new z-y-x order of 3-D arrays | 05 November 2013, 08:48:16 UTC |
dcdbbc8 | Stephan Jacobi | 29 October 2013, 16:33:38 UTC | Added correctAttenuationConstrained2 as an attenuation correction very close to Kraemer algorithm. | 29 October 2013, 16:33:38 UTC |
625072d | Stephan Jacobi | 29 October 2013, 16:30:46 UTC | Added correctAttenuationConstrained2 as an attenuation correction very close to Kraemer algorithm. | 29 October 2013, 16:30:46 UTC |
0be1ba4 | heisterm | 25 October 2013, 14:17:25 UTC | ENH: Added percent bias (pbias) as verificaiton measure to ErrorMetrics. | 25 October 2013, 14:17:25 UTC |
1520e02 | heisterm | 25 October 2013, 13:39:34 UTC | MIN: Provides the option to pass parameters accepted by the functions to process_raw_phidp. This change was necessary so the user is not forced to use the default parameters of all the functions that are used in the convenience funciton process_raw_phidp. | 25 October 2013, 13:39:34 UTC |
6e27419 | heisterm | 25 October 2013, 13:29:40 UTC | MIN: Changing the default value of the margin argument of fill_phidp to 3. | 25 October 2013, 13:29:40 UTC |
6c04945 | heisterm | 25 October 2013, 13:06:05 UTC | MIN: Added the requirement to MFB that there should be at least "mingage" number of valid raw and obs pairs. Also added a try/except statement to the linear regression in case line fitting fails. | 25 October 2013, 13:06:05 UTC |