| a754a87 | Arnd Bergmann | 24 March 2012, 11:33:59 UTC | Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into next/boards The asoc branch that was already merged into v3.4 contains some board-level changes that conflict with patches we already have here, so pull in that branch to resolve the conflicts. Conflicts: arch/arm/mach-imx/mach-imx27_visstrim_m10.c arch/arm/mach-omap2/board-omap4panda.c Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended fix for mismerge as reported by Kevin Hilman] Signed-off-by: Olof Johansson <olof@lixom.net> | 27 March 2012, 22:18:19 UTC |
| 7068805 | Arnd Bergmann | 19 March 2012, 21:03:20 UTC | Merge branch 'for-3.4/boards' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into next/boards * 'for-3.4/boards' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra: ARM: tegra: update defconfig | 19 March 2012, 21:03:20 UTC |
| 22f8d05 | Mark Brown | 19 March 2012, 17:32:06 UTC | ASoC: wm8994: Provide VMID mode control and fix default sequence The optimal management of VMID depends on a number of factors which vary dynamically at runtime, for example the connection to a system docking station. In some circumstances it is desirable to keep VMID enabled all the time, in others it is desirable to aggressively power it up and down. Provide a callback allowing machine driver to configure either the normal power up/down mode (WM8994_VMID_MODE_NORMAL) or to maintain VMID even when idle (WM8994_VMID_MODE_FORCE). This callback, wm8994_vmid_mode(), should be called with the CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 19 March 2012, 19:08:17 UTC |
| 6f8270c | Mark Brown | 03 March 2012, 13:06:25 UTC | ASoC: wm8994: Add missing break in resume Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 19 March 2012, 19:08:15 UTC |
| 5472bbc | Mark Brown | 19 March 2012, 17:31:56 UTC | ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF It can just be enabled all the time with no impact. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 19 March 2012, 19:08:12 UTC |
| 273b72c | Daniel Mack | 19 March 2012, 08:12:53 UTC | ASoC: pxa-ssp: atomically set stream active masks PXA's SSP engine fails to take its current channel phase into account when enabling a stream while the engine is already running. This results in randomly swapped left/right channels on either the record or the playback side, depending on which one was enabled first. The following patch fixes this by factoring out the bit field modifications in question to a separate function that pauses the engine temporarily, modifies the bits and kicks it off again afterwards. Appearantly, a transition of SSCR0_SSE syncs both directions properly. The patch has been rolled out to quite a number of devices over the last weeks and seems to fix the issue reliably. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 19 March 2012, 12:47:25 UTC |
| 70ac07b | Timur Tabi | 16 March 2012, 21:32:52 UTC | ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master The WM8776 codec driver requires the machine driver to set one of the SND_SOC_DAIFMT_CBx_xxx values. The P1022DS machine driver should be setting SND_SOC_DAIFMT_CBM_CFM, but since that value was zero, no one noticed. Commit 75d9ac46 ("ASoC: Allow DAI formats to be specified in the dai_link"), however, changed the value of SND_SOC_DAIFMT_CBM_CFM from zero to a non-zero value, which means that it now needs to be specifically set by the machine driver. We also set SND_SOC_DAIFMT_NB_NF, for the same reason. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 17 March 2012, 21:11:16 UTC |
| 588fb70 | Sangsu Park | 16 March 2012, 06:40:53 UTC | ASoC: Samsung: Added to support mono recording The dma size will be changed by requested number of channel(mono/stereo) from platform. For mono recording, channels_min value should be 1. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 16 March 2012, 18:50:41 UTC |
| 5dab643 | Arnd Bergmann | 15 March 2012, 16:27:01 UTC | Merge tag 'imx35-cam-fb' of git://git.pengutronix.de/git/imx/linux-2.6 into next/boards * tag 'imx35-cam-fb' of git://git.pengutronix.de/git/imx/linux-2.6: i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device | 15 March 2012, 16:27:01 UTC |
| 065319c | Arnd Bergmann | 15 March 2012, 16:09:17 UTC | Merge branch 'board-specific' of git://github.com/hzhuang1/linux into next/boards * 'board-specific' of git://github.com/hzhuang1/linux: pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 (update to 3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 15 March 2012, 16:09:21 UTC |
| 181a689 | Mark Brown | 14 March 2012, 20:18:49 UTC | ASoC: core: Fix obscure leak of runtime array We're currently not freeing card->rtd in cases where the card is unregistered before being instantiated - convert it to devm_kzalloc() to make sure that happens. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> | 15 March 2012, 14:28:25 UTC |
| 4eb98f4 | Mark Brown | 14 March 2012, 18:38:28 UTC | ASoC: wm8996: Add 44.1kHz support The WM8996 specification has been updated to specify 44.1kHz as a supported sample rate. Update the driver to accept this configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 14 March 2012, 20:37:29 UTC |
| 25af2d9 | Alex Gershgorin | 13 March 2012, 15:05:29 UTC | i.MX35-PDK: Add Camera support In i.MX35-PDK, OV2640 camera is populated on the personality board. This camera is registered as a subdevice via soc-camera interface. Signed-off-by: Alex Gershgorin <alexg@meprolight.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | 14 March 2012, 19:16:09 UTC |
| 881e09f | wu guoxing | 14 March 2012, 02:10:54 UTC | ARM : mx35: 3ds-board: add framebuffer device This patch adds framebuffer support for freescale mx35 3ds board Signed-off-by: Wu Guoxing <b39297@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> | 14 March 2012, 19:07:58 UTC |
| 63ecf0a | Paul Parsons | 09 March 2012, 14:57:56 UTC | pxa/hx4700: Remove pcmcia platform_device structure The existing pcmcia platform_device structure is not used and is not needed by the pending hx4700 PCMCIA/CF support. So let's remove it. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Philipp Zabel <philipp.zabel@gmail.com> signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> | 14 March 2012, 08:54:11 UTC |
| cd419cf | Paul Parsons | 11 March 2012, 13:23:42 UTC | ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% Drive the two Bluetooth UART output GPIOs (GPIO43_BTUART_TXD, GPIO45_BTUART_RTS) LOW during sleep mode instead of HIGH. This reduces sleep mode battery discharge from approximately 46 mA to approximately 30 mA. Signed-off-by: Oliver Winker <oliver@oli1170.net> Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> | 14 March 2012, 08:46:13 UTC |
| 95a50ca | Paul Parsons | 13 March 2012, 13:11:30 UTC | ARM: pxa/hx4700: Remove unwanted request for GPIO105 GPIO105 (nIR_ON) is requested twice: first in gpio_request_array(), then in pxa_irda_probe(). Consequently the second request fails with EBUSY: pxa2xx-ir: probe of pxa2xx-ir failed with error -16 This patch removes the first request, allowing pxa_irda_probe() to succeed. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> | 14 March 2012, 08:45:24 UTC |
| c77ef89 | Olof Johansson | 13 March 2012, 23:10:35 UTC | Merge branch 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/boards * 'next/board-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits) ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board ARM: EXYNOS: Register JPEG on nuri ARM: EXYNOS: Register JPEG on universal_c210 ARM: S5PV210: Enable JPEG on SMDKV210 ARM: S5PV210: Add JPEG board definition ARM: EXYNOS: Enable JPEG on Origen ARM: EXYNOS: Enable JPEG on SMDKV310 ARM: EXYNOS: Add __init attribute to universal_camera_init() ARM: EXYNOS: Add __init attribute to nuri_camera_init() ARM: S5PV210: Enable FIMC on SMDKC110 ARM: S5PV210: Enable FIMC on SMDKV210 ARM: S5PV210: Enable MFC on SMDKC110 ARM: S5PV210: Enable MFC on SMDKV210 ARM: EXYNOS: Enable G2D on SMDKV310 ARM: S3C64XX: Supply platform data for SPI on Cragganmore ARM: S3C64XX: Add some more Cragganmore module IDs to the table ARM: EXYNOS: Add missing FIMC media device to Origen ARM: EXYNOS: Add missing FIMC media device to SMDKV310 ARM: S5PV210: Add missing FIMC media device to Aquila ARM: SAMSUNG: Add support for S5K6AAFX camera on Nuri board ... | 13 March 2012, 23:10:35 UTC |
| 5ec65ee | Fabio Estevam | 12 March 2012, 22:48:49 UTC | ASoC: mx27vis-aic32x4: Convert it to platform driver Convert mx27vis-aic32x4 to platform driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 13 March 2012, 23:09:59 UTC |
| d7a42e1 | Lars-Peter Clausen | 05 March 2012, 13:02:15 UTC | ASoC: ep93xx-pcm: Use dmaengine PCM helper functions Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 12 March 2012, 19:03:39 UTC |
| 7a08cf7 | Mika Westerberg | 05 March 2012, 13:02:14 UTC | ASoC: dmaengine_pcm: Reset pointer position when starting a stream Otherwise a wrong position will be reported after restarting a stream and the first few samples might be skipped. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 12 March 2012, 19:03:22 UTC |
| c986564 | Mark Brown | 12 March 2012, 16:31:50 UTC | ASoC: wm8994: Prevent ABBA deadlock with CODEC and accdet mutexes Currently we can the accdet mutex from within DAPM when updating the device state which means we take accdet then the CODEC mutex but we also do the locking the other way around when responding to the jackdet IRQ. Move all the jackdet use of the CODEC mutex out of the accdet lock to avoid this. Since all the DAPM interactions depend only on a single threaded IRQ this is still serialised. The locking improvements in 3.5 allow a better solution there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 12 March 2012, 18:12:09 UTC |
| 80f4814 | Mark Brown | 12 March 2012, 10:33:34 UTC | ASoC: Revert widget I/O locking for 3.4 The widget locking depends on some of the other locking changes which are queued up for 3.5 not 3.4 so revert the locking changes and reapply them in 3.5. This reverts commit 66bf93212f19548f5ed221356b2d70189cc18254 and 96acc357bedad69fbc94d1b923a960af5a411c6f. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> | 12 March 2012, 10:37:23 UTC |
| bae82bd | MyungJoo Ham | 01 December 2011, 07:00:38 UTC | ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board Support varying voltages: - GPIODVS for Buck2 is removed. - Voltage ragne for Buck2 is widen. Support Buck2 regulator for Exynos4210-bus devfreq driver: - Added device name for buck2 regulator - Added exynos4210-busfreq platform device fro Nuri board. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:32 UTC |
| 72bce7b | Andrzej Pietrasiewicz | 09 March 2012, 16:25:25 UTC | ARM: EXYNOS: Register JPEG on nuri Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:31 UTC |
| 95e874c | Andrzej Pietrasiewicz | 09 March 2012, 16:24:33 UTC | ARM: EXYNOS: Register JPEG on universal_c210 Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:30 UTC |
| 156d264 | Sachin Kamat | 09 March 2012, 16:23:43 UTC | ARM: S5PV210: Enable JPEG on SMDKV210 Enables JPEG support on SMDKV210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:30 UTC |
| 89b9619 | Sachin Kamat | 09 March 2012, 16:19:33 UTC | ARM: S5PV210: Add JPEG board definition Adds JPEG board definition to S5PV210 machine Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:28 UTC |
| 965a330 | Sachin Kamat | 09 March 2012, 16:19:27 UTC | ARM: EXYNOS: Enable JPEG on Origen Enables JPEG support on Origen board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:27 UTC |
| 9fbe8c7 | Sachin Kamat | 09 March 2012, 16:19:21 UTC | ARM: EXYNOS: Enable JPEG on SMDKV310 Enables JPEG support on SMDKV310 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:27 UTC |
| 6325fc4 | Tushar Behera | 09 March 2012, 16:02:37 UTC | ARM: EXYNOS: Add __init attribute to universal_camera_init() s3c_set_platdata() is defined with __init attribute, hence all functions referencing this function should also be defined with __init attribute. universal_camera_init() is referenced only in '__init universal_machine_init()', thus this change won't put any additional constraint on the usage of universal_camera_init(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:26 UTC |
| fdaf130 | Tushar Behera | 09 March 2012, 16:02:33 UTC | ARM: EXYNOS: Add __init attribute to nuri_camera_init() s3c_set_platdata() is defined with __init attribute, hence all functions referencing this function should also be defined with __init attribute. nuri_camera_init() is referenced only in '__init nuri_machine_init()', thus this change won't put any additional constraint on the usage of nuri_camera_init(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:25 UTC |
| 4106589 | Sachin Kamat | 09 March 2012, 15:00:44 UTC | ARM: S5PV210: Enable FIMC on SMDKC110 Enable FIMC 0,1,2 and media device (md) on SMDKC110 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:23 UTC |
| 859e10c | Sachin Kamat | 09 March 2012, 15:00:40 UTC | ARM: S5PV210: Enable FIMC on SMDKV210 Enable FIMC 0,1,2 and media device(md) on SMDKV210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:23 UTC |
| 6ff5d25 | Sachin Kamat | 09 March 2012, 15:00:35 UTC | ARM: S5PV210: Enable MFC on SMDKC110 Add MFC support on SMDKC110 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:22 UTC |
| c7bf01d | Sachin Kamat | 09 March 2012, 15:00:31 UTC | ARM: S5PV210: Enable MFC on SMDKV210 Add MFC support on SMDKV210 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:21 UTC |
| b3421f9 | Sachin Kamat | 09 March 2012, 14:51:45 UTC | ARM: EXYNOS: Enable G2D on SMDKV310 This patch enables G2D support on SMDKV310 board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> | 11 March 2012, 06:32:20 UTC |
| fde7d90 | Linus Torvalds | 10 March 2012, 21:49:52 UTC | Linux 3.3-rc7 | 10 March 2012, 21:49:52 UTC |
| c454f81 | Olof Johansson | 10 March 2012, 17:15:30 UTC | Merge branch 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: add minimal support for Nokia RM-696 ARM: OMAP: enable Bluetooth on the PandaBoard ARM: OMAP: pandora: add support for backlight and poweroff ARM: OMAP4: board-4430sdp: don't initialize value that is never used ARM: OMAP3: cm-t3517: add EMAC support ARM: OMAP: move generic EMAC init to separate file ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios ARM: OMAP: Add omap_reserve functionality (includes sync-up to 3.3-rc6) | 10 March 2012, 17:15:30 UTC |
| 1ad4fb2 | Olof Johansson | 10 March 2012, 17:04:14 UTC | Merge branch 'ams-delta' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'ams-delta' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ASoC: OMAP: ams-delta: drop .set_bias_level callback ARM: OMAP1: ams-delta: update the modem to use regulator API ARM: OMAP1: ams-delta: set up regulator over modem reset GPIO pin ARM: OMAP1: ams-delta: clean up init data section assignments ARM: OMAP1: ams-delta: fix incorrect section tags | 10 March 2012, 17:04:14 UTC |
| c7b2855 | Al Viro | 08 March 2012, 17:51:19 UTC | aio: fix the "too late munmap()" race Current code has put_ioctx() called asynchronously from aio_fput_routine(); that's done *after* we have killed the request that used to pin ioctx, so there's nothing to stop io_destroy() waiting in wait_for_all_aios() from progressing. As the result, we can end up with async call of put_ioctx() being the last one and possibly happening during exit_mmap() or elf_core_dump(), neither of which expects stray munmap() being done to them... We do need to prevent _freeing_ ioctx until aio_fput_routine() is done with that, but that's all we care about - neither io_destroy() nor exit_aio() will progress past wait_for_all_aios() until aio_fput_routine() does really_put_req(), so the ioctx teardown won't be done until then and we don't care about the contents of ioctx past that point. Since actual freeing of these suckers is RCU-delayed, we don't need to bump ioctx refcount when request goes into list for async removal. All we need is rcu_read_lock held just over the ->ctx_lock-protected area in aio_fput_routine(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 March 2012, 02:59:59 UTC |
| 86b62a2 | Al Viro | 07 March 2012, 05:16:35 UTC | aio: fix io_setup/io_destroy race Have ioctx_alloc() return an extra reference, so that caller would drop it on success and not bother with re-grabbing it on failure exit. The current code is obviously broken - io_destroy() from another thread that managed to guess the address io_setup() would've returned would free ioctx right under us; gets especially interesting if aio_context_t * we pass to io_setup() points to PROT_READ mapping, so put_user() fails and we end up doing io_destroy() on kioctx another thread has just got freed... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 10 March 2012, 02:59:59 UTC |
| 86e0600 | Linus Torvalds | 10 March 2012, 02:09:18 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs updates from Chris Mason: "I have two additional and btrfs fixes in my for-linus branch. One is a casting error that leads to memory corruption on i386 during scrub, and the other fixes a corner case in the backref walking code (also triggered by scrub)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix casting error in scrub reada code btrfs: fix locking issues in find_parent_nodes() | 10 March 2012, 02:09:18 UTC |
| be22aec | Hugh Dickins | 09 March 2012, 21:37:32 UTC | memcg: revert fix to mapcount check for this release Respectfully revert commit e6ca7b89dc76 "memcg: fix mapcount check in move charge code for anonymous page" for the 3.3 release, so that it behaves exactly like releases 2.6.35 through 3.2 in this respect. Horiguchi-san's commit is correct in itself, 1 makes much more sense than 2 in that check; but it does not go far enough - swapcount should be considered too - if we really want such a check at all. We appear to have reached agreement now, and expect that 3.4 will remove the mapcount check, but had better not make 3.3 different. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 March 2012, 23:32:20 UTC |
| a7f4255 | Thomas Gleixner | 09 March 2012, 19:55:10 UTC | x86: Derandom delay_tsc for 64 bit Commit f0fbf0abc093 ("x86: integrate delay functions") converted delay_tsc() into a random delay generator for 64 bit. The reason is that it merged the mostly identical versions of delay_32.c and delay_64.c. Though the subtle difference of the result was: static void delay_tsc(unsigned long loops) { - unsigned bclock, now; + unsigned long bclock, now; Now the function uses rdtscl() which returns the lower 32bit of the TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64 bit this fails when the lower 32bit are close to wrap around when bclock is read, because the following check if ((now - bclock) >= loops) break; evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0 because the unsigned long (now - bclock) of these values results in 0xffffffff00000001 which is definitely larger than the loops value. That explains Tvortkos observation: "Because I am seeing udelay(500) (_occasionally_) being short, and that by delaying for some duration between 0us (yep) and 491us." Make those variables explicitely u32 again, so this works for both 32 and 64 bit. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # >= 2.6.27 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 March 2012, 20:43:27 UTC |
| c447064 | Linus Torvalds | 09 March 2012, 20:14:23 UTC | Merge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing exciting here: just a few regression fixes for HD-audio and ASoC, also the support of missing 32bit compat ioctl for HDSPM." * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hdspm - Provide ioctl_compat ALSA: hda/realtek - Apply the coef-setup only to ALC269VB ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3 ASoC: neo1973: fix neo1973 wm8753 initialization | 09 March 2012, 20:14:23 UTC |
| 8cd5c86 | David Brown | 09 March 2012, 19:39:32 UTC | MAINTAINERS: new git entry for arm/mach-msm The msm git tree moved to git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 March 2012, 20:13:36 UTC |
| 0ab5d75 | Linus Torvalds | 09 March 2012, 15:27:38 UTC | Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming Pull C6X fix from Mark Salter: "Fix for C6X KSTK_EIP and KSTK_ESP macros." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: fix KSTK_EIP and KSTK_ESP macros | 09 March 2012, 15:27:38 UTC |
| 0cacaf5 | Linus Torvalds | 09 March 2012, 15:26:25 UTC | Merge tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull two IOMMU fixes from Joerg Roedel: "The first is an additional fix for the OMAP initialization order issue and the second patch fixes a possible section mismatch which can lead to a kernel crash in the AMD IOMMU driver when suspend/resume is used and the compiler has not inlined the iommu_set_device_table function." * tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: x86/amd: iommu_set_device_table() must not be __init ARM: OMAP: fix iommu, not mailbox | 09 March 2012, 15:26:25 UTC |
| 45b8da9 | Linus Torvalds | 09 March 2012, 15:23:17 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull radeon drm stuff from Dave Airlie: "Just some radeon fixes, one is for an oops where we run out of ioremap space on some big hardware systems in 32-bit mode, stuff doesn't work properly but at least the machine will boot. One regression fix, and two bugs, one hw, one blit code." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix hdmi duallink checks drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) drm/radeon: deal with errors from framebuffer init path. drm/radeon: fix a semaphore deadlock on pre cayman asics | 09 March 2012, 15:23:17 UTC |
| e304dfd | Linus Torvalds | 09 March 2012, 15:14:44 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking from David Miller: 1) IPV4 routing metrics can become stale when routes are changed by the administrator, fix from Steffen Klassert. 2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask, fix by using set_bit. From Dan Carpenter. 3) Memory accounting bug in carl9170 driver results in wedged TX queue. Fix from Nicolas Cavallari. 4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix from Johannes Berg. 5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix from Ben Pfaff. 6) ehea conversion to 64-bit stats lost multicast and rx_errors accounting, fix from Eric Dumazet. 7) Bridge state transition logging in br_stp_disable_port() is busted, it's emitted at the wrong time and the message is in the wrong tense, fix from Paulius Zaleckas. 8) mlx4 device erroneously invokes the queue resize firmware operation twice, fix from Jack Morgenstein. 9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb() otherwise we recurse into taking it again. Fix from Sebastian Siewior. 10) hyperv network driver uses the wrong driver name string, fix from Haiyang Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver net/usbnet: avoid recursive locking in usbnet_stop() route: Remove redirect_genid inetpeer: Invalidate the inetpeer tree along with the routing cache mlx4_core: fix bug in modify_cq wrapper for resize flow. atl1c: set ATL1C_WORK_EVENT_RESET bit correctly bridge: fix state reporting when port is disabled bridge: br_log_state() s/entering/entered/ ehea: restore multicast and rx_errors fields openvswitch: Fix checksum update for actions on UDP packets. openvswitch: Honor dp_ifindex, when specified, for vport lookup by name. iwlwifi: fix wowlan suspend mwifiex: reset encryption mode flag before association carl9170: fix frame delivery if sta is in powersave mode carl9170: Fix memory accounting when sta is in power-save mode. | 09 March 2012, 15:14:44 UTC |
| aeb8707 | Ashish Chavan | 09 March 2012, 08:21:30 UTC | ASoC: da7210: Remove extra registers from defaults list This patch removes following registers from reg map defaults, - Registers which are currently not used by driver - Non existing registers - Volatile registers Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 09 March 2012, 11:50:28 UTC |
| 2b81ec6 | Shawn Guo | 08 March 2012, 16:59:46 UTC | ASoC: fsl: check property 'compatible' for the machine name Check /compatible rather than /model to determine the machine name. The p1022ds older device trees get a different /model from the new ones, while /compatible is consistent there, so checking /compatible will save the bother of detecting older p1022ds device trees. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 09 March 2012, 11:38:12 UTC |
| 9f8050c | Linus Torvalds | 09 March 2012, 01:32:42 UTC | Merge tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull last minute fixes from Olof Johansson: "One samsung build fix due to a mis-applied patch, and a small set of OMAP fixes. This should be the last from arm-soc for 3.3, hopefully." * tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: S3C2440: Fixed build error for s3c244x ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts | 09 March 2012, 01:32:42 UTC |
| 9a0cee7 | Linus Torvalds | 09 March 2012, 01:25:17 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Another small, clear fix in a specific driver." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65910: Configure correct value for VDDCTRL vout reg | 09 March 2012, 01:25:17 UTC |
| ee0849c | Linus Torvalds | 09 March 2012, 01:24:27 UTC | Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull minor devicetree bug fixes and documentation updates from Grant Likely: "Fixes up a duplicate #include, adds an empty implementation of of_find_compatible_node() and make git ignore .dtb files. And fix up bus name on OF described PHYs. Nothing exciting here." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: doc: dt: Fix broken reference in gpio-leds documentation of/mdio: fix fixed link bus name of/fdt.c: asm/setup.h included twice of: add picochip vendor prefix dt: add empty of_find_compatible_node function ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore | 09 March 2012, 01:24:27 UTC |
| 7d77696 | Linus Torvalds | 09 March 2012, 01:23:45 UTC | Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely: "Minor fix for pl022_dma_probe() function which was put in the wrong section." * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: Fix section mismatch in spi-pl022.c | 09 March 2012, 01:23:45 UTC |
| 42a6c7e | Linus Torvalds | 09 March 2012, 01:22:54 UTC | Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull four hwmon patches from Guenter Roeck * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 hwmon: (zl6100) Maintain delay parameter in driver instance data hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000 | 09 March 2012, 01:22:54 UTC |
| 5d0edf2 | Linus Torvalds | 09 March 2012, 01:21:51 UTC | Merge tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes for 3.3 from Alasdair Kergon Eight small device-mapper bug fixes. * tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm raid: fix flush support dm raid: set MD_CHANGE_DEVS when rebuilding dm thin metadata: decrement counter after removing mapped block dm thin metadata: unlock superblock in init_pmd error path dm thin metadata: remove incorrect close_device on creation error paths dm flakey: fix crash on read when corrupt_bio_byte not set dm io: fix discard support dm ioctl: do not leak argv if target message only contains whitespace | 09 March 2012, 01:21:51 UTC |
| d31b20f | Haiyang Zhang | 07 March 2012, 10:02:00 UTC | net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 21:55:27 UTC |
| c66fcfa | Olof Johansson | 08 March 2012, 18:56:12 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688 ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision ARM: OMAP2+: Remove apply_uV constraints for fixed regulator ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts | 08 March 2012, 18:56:12 UTC |
| 5b59648 | Mark Brown | 08 March 2012, 17:00:57 UTC | ASoC: wm8996: Remove separate output stage enable step Marginally improve performance during startup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 March 2012, 18:24:27 UTC |
| da7f910 | Mark Brown | 08 March 2012, 15:59:50 UTC | ASoC: wm8996: Remove some volatile regisers from the defaults table Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 March 2012, 18:24:22 UTC |
| 5e4ba56 | Shawn Guo | 08 March 2012, 16:59:40 UTC | ASoC: core: missing set_fmt should not be complaint Not having a DAI link set_fmt operation is perfectly normal and should not be complaint. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 March 2012, 18:23:46 UTC |
| 33593b5 | Ashish Chavan | 08 March 2012, 13:34:56 UTC | ASoC: da7210: Update for using I2C regmap Current DA7210 driver has I2C support using older register cache methods. This patch updates it for latest regmap framework. This has been tested on DA7210 EVB with Samsung SMDK6410 board. Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com> Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 March 2012, 18:19:24 UTC |
| 8d8bf58 | Qiao Zhou | 08 March 2012, 02:02:36 UTC | ASoC: add more sample rate for pxa-ssp add more sample rate for pxa-ssp, which are supported, such as 32KHz, 64KHz. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 08 March 2012, 18:15:43 UTC |
| 48546cc | Kukjin Kim | 08 March 2012, 09:48:36 UTC | ARM: S3C2440: Fixed build error for s3c244x Fixed following: arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart': arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1 make: *** [arch/arm/mach-s3c24xx] Error 2 Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 08 March 2012, 16:57:29 UTC |
| 8de5d6f | Adrian Knoth | 08 March 2012, 14:38:04 UTC | ALSA: hdspm - Provide ioctl_compat snd_hdspm uses its own ioctls to acquire config- and status information. Expose the corresponding ioctl handler via ioctl_compat, so that 32bit applications can use it on 64bit kernels. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 08 March 2012, 14:58:58 UTC |
| 6b7f000 | Jan Beulich | 08 March 2012, 08:58:13 UTC | x86/amd: iommu_set_device_table() must not be __init This function is called from enable_iommus(), which in turn is used from amd_iommu_resume(). Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> | 08 March 2012, 10:36:06 UTC |
| 38aa4a5 | Alex Deucher | 08 March 2012, 00:05:01 UTC | drm/radeon/kms: fix hdmi duallink checks All pre-SI chips are limited to 165 Mhz for single link. Code in question will be re-enabled when SI support is added. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 https://bugzilla.kernel.org/show_bug.cgi?id=42887 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 08 March 2012, 09:39:54 UTC |
| cf00790 | Marek Olšák | 07 March 2012, 22:33:00 UTC | drm/radeon/kms: set SX_MISC in the r6xx blit code (v2) Mesa may set it to 1, causing all primitives to be killed. v2: also update the r7xx code Signed-off-by: Marek Olšák <maraeo@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 08 March 2012, 09:39:29 UTC |
| 4231d47 | Sebastian Siewior | 07 March 2012, 10:19:28 UTC | net/usbnet: avoid recursive locking in usbnet_stop() |kernel BUG at kernel/rtmutex.c:724! |[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4) |[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194) |[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) |[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40) |[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) |[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) |[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) |[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc) |[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) |[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) |[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) |[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c) |[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8) defer_bh() takes the lock which is hold during unlink_urbs(). The safe walk suggest that the skb will be removed from the list and this is done by defer_bh() so it seems to be okay to drop the lock here. Cc: stable@kernel.org Reported-by: AnÃbal Almeida Pinto <anibal.pinto@efacec.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:49:29 UTC |
| ac3f48d | Steffen Klassert | 06 March 2012, 21:21:10 UTC | route: Remove redirect_genid As we invalidate the inetpeer tree along with the routing cache now, we don't need a genid to reset the redirect handling when the routing cache is flushed. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:30:32 UTC |
| 5faa5df | Steffen Klassert | 06 March 2012, 21:20:26 UTC | inetpeer: Invalidate the inetpeer tree along with the routing cache We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:30:24 UTC |
| dcf353b | Jack Morgenstein | 07 March 2012, 05:56:35 UTC | mlx4_core: fix bug in modify_cq wrapper for resize flow. The actual FW command is called in procedure "handle_resize". Code incorrectly invoked the FW command again (in good flow), in the modify_cq wrapper function. Fix by skipping second FW invocation unconditionally for resize. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:28:01 UTC |
| 7831545 | Dan Carpenter | 07 March 2012, 00:02:04 UTC | atl1c: set ATL1C_WORK_EVENT_RESET bit correctly ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop. The intent was to set the zero bit. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:27:45 UTC |
| 5200959 | Paulius Zaleckas | 06 March 2012, 22:25:22 UTC | bridge: fix state reporting when port is disabled Now we have: eth0: link *down* br0: port 1(eth0) entered *forwarding* state br_log_state(p) should be called *after* p->state is set to BR_STATE_DISABLED. Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:25:25 UTC |
| d9e179e | Paulius Zaleckas | 06 March 2012, 22:25:14 UTC | bridge: br_log_state() s/entering/entered/ When br_log_state() is reporting state it should say "entered" istead of "entering" since state at this point is already changed. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:25:25 UTC |
| 09c1d44 | Eric Dumazet | 06 March 2012, 19:46:41 UTC | ehea: restore multicast and rx_errors fields Commit 239c562c94d (ehea: Add 64bit statistics) added a regression, since we no longer report multicast & rx_errors fields, taken from port->stats structure. These fields are updated in ehea_update_stats() every second. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 March 2012, 08:23:04 UTC |
| 9259c48 | David S. Miller | 08 March 2012, 06:49:01 UTC | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch | 08 March 2012, 06:49:01 UTC |
| 0a25893 | Stephen Warren | 06 March 2012, 00:03:53 UTC | ARM: tegra: update defconfig Refresh tegra_defconfig: New options enabled: * PERF_EVENTS * Tegra EMC scaling * Support for all 4 CPUs on Tegra30 * AUTO_ZRELADDR for unified Tegra20+Tegra30 images * CPU_FREQ/CPU_IDLE * BLK_DEV_SR * INPUT_EVDEV * Regulators, including fixed, GPIO, TPS6586x * Audio for Tegra+ALC5632 (for Paz00/Toshiba AC100) * NVEC (staging, for Paz00/Toshiba AC100) * IOMMU for Tegra20's GART and Tegra30's SMMU * TEGRA_AES * ext4, for trim support on SD/eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net> | 07 March 2012, 22:38:49 UTC |
| 81e5d41 | Jesse Gross | 06 March 2012, 23:05:46 UTC | openvswitch: Fix checksum update for actions on UDP packets. When modifying IP addresses or ports on a UDP packet we don't correctly follow the rules for unchecksummed packets. This meant that packets without a checksum can be given a incorrect new checksum and packets with a checksum can become marked as being unchecksummed. This fixes it to handle those requirements. Signed-off-by: Jesse Gross <jesse@nicira.com> | 07 March 2012, 22:36:57 UTC |
| d47775c | David S. Miller | 07 March 2012, 20:34:42 UTC | Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless | 07 March 2012, 20:34:42 UTC |
| fb97624 | Fabio Estevam | 07 March 2012, 18:19:57 UTC | ASoC: imx: imx-audmux: Fix section mismatch Fix the following section mismatch warning: WARNING: vmlinux.o(.data+0x35be8): Section mismatch in reference from the variable imx_audmux_driver to the function .init.text:imx_audmux_probe() The variable imx_audmux_driver references the function __init imx_audmux_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 07 March 2012, 19:32:39 UTC |
| c4632ae | Laxman Dewangan | 07 March 2012, 11:09:05 UTC | regulator: tps65910: Configure correct value for VDDCTRL vout reg As per datasheet, the voltage output is defined as from SEL[6:0] = 3 to 64 (dec) Vout= (SEL[6:0] × 12.5 mV + 562.5 mV) The list_voltage returns the vout as 600mV + selector * 12.5mV and so equivalent VSEL is selector + 3. Adding 3 on selector when configuring VSEL register for VDDCTRL output. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 07 March 2012, 19:28:37 UTC |
| 0ca93de | Jonathan E Brassow | 07 March 2012, 19:09:48 UTC | dm raid: fix flush support Fix dm-raid flush support. Both md and dm have support for flush, but the dm-raid target forgot to set the flag to indicate that flushes should be passed on. (Important for data integrity e.g. with writeback cache enabled.) Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:48 UTC |
| 3aa3b2b | Jonathan E Brassow | 07 March 2012, 19:09:47 UTC | dm raid: set MD_CHANGE_DEVS when rebuilding The 'rebuild' parameter is used to rebuild individual devices in an array (e.g. resynchronize a RAID1 device or recalculate a parity device in higher RAID). The MD_CHANGE_DEVS flag must be set when this parameter is given in order to write out the superblocks and make the change take immediate effect. The code that handles new devices in super_load already sets MD_CHANGE_DEVS and 'FirstUse'. (The 'FirstUse' flag was being set as a special case for rebuilds in super_init_validation.) Add a condition for rebuilds in super_load to take care of both flags without the special case in 'super_init_validation'. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:47 UTC |
| af63bcb | Joe Thornber | 07 March 2012, 19:09:44 UTC | dm thin metadata: decrement counter after removing mapped block Correct the number of mapped sectors shown on a thin device's status line by decrementing td->mapped_blocks in __remove() each time a block is removed. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:44 UTC |
| 4469a5f | Joe Thornber | 07 March 2012, 19:09:43 UTC | dm thin metadata: unlock superblock in init_pmd error path If dm_sm_disk_create() fails the superblock must be unlocked. Signed-off-by: Joe Thornber <ejt@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:43 UTC |
| 1f3db25 | Mike Snitzer | 07 March 2012, 19:09:41 UTC | dm thin metadata: remove incorrect close_device on creation error paths The __open_device() error paths in __create_thin() and __create_snap() incorrectly call __close_device() even if td was not initialized by __open_device(). Remove this. Also document __open_device() return values, remove a redundant td->changed = 1 in __create_thin(), and insert an additional safeguard against creating an already-existing device. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:41 UTC |
| 1212268 | Mike Snitzer | 07 March 2012, 19:09:39 UTC | dm flakey: fix crash on read when corrupt_bio_byte not set The following BUG is hit on the first read that is submitted to a dm flakey test device while the device is "down" if the corrupt_bio_byte feature wasn't requested when the device's table was loaded. Example DM table that will hit this BUG: 0 2097152 flakey 8:0 2048 0 30 This bug was introduced by commit a3998799fb4df0b0af8271a7d50c4269032397aa (dm flakey: add corrupt_bio_byte feature) in v3.1-rc1. BUG: unable to handle kernel paging request at ffff8801cfce3fff IP: [<ffffffffa008c233>] corrupt_bio_data+0x6e/0xae [dm_flakey] PGD 1606063 PUD 0 Oops: 0002 [#1] SMP ... Call Trace: <IRQ> [<ffffffffa008c2b5>] flakey_end_io+0x42/0x48 [dm_flakey] [<ffffffffa00dca98>] clone_endio+0x54/0xb6 [dm_mod] [<ffffffff81130587>] bio_endio+0x2d/0x2f [<ffffffff811c819a>] req_bio_endio+0x96/0x9f [<ffffffff811c94b9>] blk_update_request+0x1dc/0x3a9 [<ffffffff812f5ee2>] ? rcu_read_unlock+0x21/0x23 [<ffffffff811c96a6>] blk_update_bidi_request+0x20/0x6e [<ffffffff811c9713>] blk_end_bidi_request+0x1f/0x5d [<ffffffff811c978d>] blk_end_request+0x10/0x12 [<ffffffff8128f450>] scsi_io_completion+0x1e5/0x4b1 [<ffffffff812882a9>] scsi_finish_command+0xec/0xf5 [<ffffffff8128f830>] scsi_softirq_done+0xff/0x108 [<ffffffff811ce284>] blk_done_softirq+0x84/0x98 [<ffffffff81048d19>] __do_softirq+0xe3/0x1d5 [<ffffffff8138f83f>] ? _raw_spin_lock+0x62/0x69 [<ffffffff810997cf>] ? handle_irq_event+0x4c/0x61 [<ffffffff8139833c>] call_softirq+0x1c/0x30 [<ffffffff81003b37>] do_softirq+0x4b/0xa3 [<ffffffff81048a39>] irq_exit+0x53/0xca [<ffffffff81398acd>] do_IRQ+0x9d/0xb4 [<ffffffff81390333>] common_interrupt+0x73/0x73 ... Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:39 UTC |
| 0c535e0 | Milan Broz | 07 March 2012, 19:09:37 UTC | dm io: fix discard support This patch fixes a crash by recognising discards in dm_io. Currently dm_mirror can send REQ_DISCARD bios if running over a discard-enabled device and without support in dm_io the system crashes badly. BUG: unable to handle kernel paging request at 00800000 IP: __bio_add_page.part.17+0xf5/0x1e0 ... bio_add_page+0x56/0x70 dispatch_io+0x1cf/0x240 [dm_mod] ? km_get_page+0x50/0x50 [dm_mod] ? vm_next_page+0x20/0x20 [dm_mod] ? mirror_flush+0x130/0x130 [dm_mirror] dm_io+0xdc/0x2b0 [dm_mod] ... Introduced in 2.6.38-rc1 by commit 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4 (dm raid1: support discard). Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@kernel.org Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:37 UTC |
| 902c6a9 | Jesper Juhl | 07 March 2012, 19:09:34 UTC | dm ioctl: do not leak argv if target message only contains whitespace If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com> | 07 March 2012, 19:09:34 UTC |
| 1bd612a | Guenter Roeck | 05 March 2012, 19:13:52 UTC | hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804 Also update IDT datasheet locations. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org> | 07 March 2012, 17:48:44 UTC |
| 7ad6307 | Guenter Roeck | 07 March 2012, 11:58:55 UTC | hwmon: (zl6100) Maintain delay parameter in driver instance data A global delay parameter has the side effect of being overwritten with 0 if a single ZL2004 or ZL6105 is instantiated. If other chips supported by the same driver are in the system, this will result in access errors for those chips. To solve the problem, keep a per-instance copy of the delay parameter, and do not change the original parameter. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.1+ Acked-by: Jean Delvare <khali@linux-fr.org> | 07 March 2012, 17:48:43 UTC |
| 7cb3c44 | Guenter Roeck | 04 March 2012, 16:10:57 UTC | hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes There are up to three POUT alarm attributes, not two, since cap_alarm was added. Reported-by: Michele Petracca <mi.petracca@gmail.com> Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport] Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 07 March 2012, 17:48:42 UTC |
| 4de8612 | Jean Delvare | 05 March 2012, 13:32:00 UTC | hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000 These are fully compatible with Jedec JC 42.4 as far as I can see. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> | 07 March 2012, 17:48:21 UTC |
| 4f262ac | Linus Torvalds | 07 March 2012, 16:33:03 UTC | Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7358/1: perf: add PMU hotplug notifier ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode ARM: ecard: ensure fake vma vm_flags is setup ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection ARM: 7345/1: errata: update workaround for A9 erratum #743622 ARM: 7348/1: arm/spear600: fix one-shot timer ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool | 07 March 2012, 16:33:03 UTC |
| d09b3c9 | Linus Torvalds | 07 March 2012, 16:31:31 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just a few driver fixups, nothing exciting." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use Input: twl4030-vibra - use proper guard for PM methods Input: evdev - fix variable initialisation Input: wacom - add missing LEDS_CLASS to Kconfig Input: ALPS - fix touchpad detection when buttons are pressed | 07 March 2012, 16:31:31 UTC |
| 4cd7c0a | Mark Salter | 07 March 2012, 16:19:31 UTC | C6X: fix KSTK_EIP and KSTK_ESP macros There was a latent typo in the C6X KSTK_EIP and KSTK_ESP macros which caused a problem with a new patch which used them. The broken definitions were of the form: #define KSTK_FOO(tsk) (task_pt_regs(task)->foo) Note the use of task vs tsk. This actually worked before because the only place in the kernel which used these macros passed in a local pointer named task. Signed-off-by: Mark Salter <msalter@redhat.com> | 07 March 2012, 16:28:22 UTC |
