Revision a7d82a0a3cd547494294baee7f9764ea44bead73 authored by Daniel Hellstrom on 09 June 2011, 02:54:08 UTC, committed by David S. Miller on 09 June 2011, 23:12:34 UTC
Three new IPIs were introduced by commit ecbc42b70acbc6327adefe9635db93fcf62bf59d ("sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines"), the old handler was already prepared for IPIs but handled only IRQ14 and IRQ13, this patch adds support for the new IPI at IRQ12. The IPI trap handler looks at the mask rather than the pending IRQ/IPI, this bug may have masked the problem above, introduced by the same commit. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 6cb79b3
rsrc_iodyn.c
/*
* rsrc_iodyn.c -- Resource management routines for MEM-static sockets.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The initial developer of the original code is David A. Hinds
* <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
* are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
*
* (C) 1999 David A. Hinds
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include "cs_internal.h"
struct pcmcia_align_data {
unsigned long mask;
unsigned long offset;
};
static resource_size_t pcmcia_align(void *align_data,
const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pcmcia_align_data *data = align_data;
resource_size_t start;
start = (res->start & ~data->mask) + data->offset;
if (start < res->start)
start += data->mask + 1;
#ifdef CONFIG_X86
if (res->flags & IORESOURCE_IO) {
if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
}
#endif
#ifdef CONFIG_M68K
if (res->flags & IORESOURCE_IO) {
if ((res->start + size - 1) >= 1024)
start = res->end;
}
#endif
return start;
}
static struct resource *__iodyn_find_io_region(struct pcmcia_socket *s,
unsigned long base, int num,
unsigned long align)
{
struct resource *res = pcmcia_make_resource(0, num, IORESOURCE_IO,
dev_name(&s->dev));
struct pcmcia_align_data data;
unsigned long min = base;
int ret;
data.mask = align - 1;
data.offset = base & data.mask;
#ifdef CONFIG_PCI
if (s->cb_dev) {
ret = pci_bus_alloc_resource(s->cb_dev->bus, res, num, 1,
min, 0, pcmcia_align, &data);
} else
#endif
ret = allocate_resource(&ioport_resource, res, num, min, ~0UL,
1, pcmcia_align, &data);
if (ret != 0) {
kfree(res);
res = NULL;
}
return res;
}
static int iodyn_find_io(struct pcmcia_socket *s, unsigned int attr,
unsigned int *base, unsigned int num,
unsigned int align, struct resource **parent)
{
int i, ret = 0;
/* Check for an already-allocated window that must conflict with
* what was asked for. It is a hack because it does not catch all
* potential conflicts, just the most obvious ones.
*/
for (i = 0; i < MAX_IO_WIN; i++) {
if (!s->io[i].res)
continue;
if (!*base)
continue;
if ((s->io[i].res->start & (align-1)) == *base)
return -EBUSY;
}
for (i = 0; i < MAX_IO_WIN; i++) {
struct resource *res = s->io[i].res;
unsigned int try;
if (res && (res->flags & IORESOURCE_BITS) !=
(attr & IORESOURCE_BITS))
continue;
if (!res) {
if (align == 0)
align = 0x10000;
res = s->io[i].res = __iodyn_find_io_region(s, *base,
num, align);
if (!res)
return -EINVAL;
*base = res->start;
s->io[i].res->flags =
((res->flags & ~IORESOURCE_BITS) |
(attr & IORESOURCE_BITS));
s->io[i].InUse = num;
*parent = res;
return 0;
}
/* Try to extend top of window */
try = res->end + 1;
if ((*base == 0) || (*base == try)) {
if (adjust_resource(s->io[i].res, res->start,
res->end - res->start + num + 1))
continue;
*base = try;
s->io[i].InUse += num;
*parent = res;
return 0;
}
/* Try to extend bottom of window */
try = res->start - num;
if ((*base == 0) || (*base == try)) {
if (adjust_resource(s->io[i].res,
res->start - num,
res->end - res->start + num + 1))
continue;
*base = try;
s->io[i].InUse += num;
*parent = res;
return 0;
}
}
return -EINVAL;
}
struct pccard_resource_ops pccard_iodyn_ops = {
.validate_mem = NULL,
.find_io = iodyn_find_io,
.find_mem = NULL,
.init = static_init,
.exit = NULL,
};
EXPORT_SYMBOL(pccard_iodyn_ops);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...