https://github.com/torvalds/linux
Revision a9d3d2068064b7a6395871a49616d3784f802d50 authored by Konrad Rzeszutek Wilk on 16 June 2011, 19:36:39 UTC, committed by Dave Jones on 16 June 2011, 20:31:13 UTC
Before this patch if we failed the vid transition would still try to
submit the "new" frequencies to cpufreq.
That is incorrect - also we could submit a non-existing frequency value
which would cause cpufreq to crash. The ultimate fix is in cpufreq
to deal with incorrect values, but this patch improves the error
recovery in the AMD powernowk8 driver.

The failure that was reported was as follows:

powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ (1 cpu cores) (version 2.20.00)
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: fid 0xa (1800 MHz), vid 0xa
powernow-k8: fid 0xc (2000 MHz), vid 0x8
powernow-k8: fid 0xe (2200 MHz), vid 0x8
Marking TSC unstable due to cpufreq changes
powernow-k8: fid trans failed, fid 0x2, curr 0x0
BUG: unable to handle kernel paging request at ffff880807e07b78
IP: [<ffffffff81479163>] cpufreq_stats_update+0x46/0x5b
...

And transition fails and data->currfid ends up with 0. Since
the machine does not support 800Mhz value when the calculation is
done ('find_khz_freq_from_fid(data->currfid);') it reports the
new frequency as 800000 which is bogus. This patch fixes
the issue during target setting.

The patch however does not fix the issue in 'powernowk8_cpu_init'
where the pol->cur can also be set with the 800000 value:

          pol->cur = find_khz_freq_from_fid(data->currfid);
  dprintk("policy current frequency %d kHz\n", pol->cur);

  /* min/max the cpu is capable of */
  if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {

The fix for that looks to update cpufreq_frequency_table_cpuinfo to
check pol->cur.... but that would cause an regression in how the
acpi-cpufreq driver works (it sets cpu->cur after calling
cpufreq_frequency_table_cpuinfo). Instead the fix will be to let
cpufreq gracefully handle bogus data (another patch).

Acked-by: Borislav Petkov <bp@alien8.de>
CC: andre.przywara@amd.com
CC: Mark.Langsdorf@amd.com
Reported-by: Tobias Diedrich <ranma+xen@tdiedrich.de>
Tested-by: Tobias Diedrich <ranma+xen@tdiedrich.de>
[v1: Rebased on v3.0-rc2, reduced patch to deal with vid case]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>
1 parent 46a310b
History
Tip revision: a9d3d2068064b7a6395871a49616d3784f802d50 authored by Konrad Rzeszutek Wilk on 16 June 2011, 19:36:39 UTC
[CPUFREQ] powernow-k8: Don't notify of successful transition if we failed (vid case).
Tip revision: a9d3d20
File Mode Size
Documentation
arch
block
crypto
drivers
firmware
fs
include
init
ipc
kernel
lib
mm
net
samples
scripts
security
sound
tools
usr
virt
.gitignore -rw-r--r-- 966 bytes
.mailmap -rw-r--r-- 4.2 KB
COPYING -rw-r--r-- 18.3 KB
CREDITS -rw-r--r-- 92.3 KB
Kbuild -rw-r--r-- 2.4 KB
Kconfig -rw-r--r-- 252 bytes
MAINTAINERS -rw-r--r-- 189.6 KB
Makefile -rw-r--r-- 52.2 KB
README -rw-r--r-- 17.1 KB
REPORTING-BUGS -rw-r--r-- 3.3 KB

README

back to top