Skip to main content

Browse the archive

Revision aa092831fe3322467a4229f9ea30c0a8bcba0c42 authored by John Linn on 23 October 2012, 17:03:59 UTC, committed by John Linn on 23 October 2012, 17:07:39 UTC 
Xilinx: ARM: update to xilinx-14.3-build2 release
 
Minor change to make uname report the 14.3 build 2 for the release.

Signed-off-by: John Linn <john.linn@xilinx.com>
1 parent 2c6db3b
Raw File
convert_vmlinux.sh 
#!/bin/sh


if [ "$1" == "cpu1" ] ; then
	echo "Creating vmlinux1.bin for CPU1 at 66MB (0x4200000) start address"

	${CROSS_COMPILE:-arm-none-linux-gnueabi-}objcopy -R .note.gnu.build-id -R .comment -R .ARM.attributes --change-addresses -0xBBE00000 vmlinux vmlinux1.elf
	${CROSS_COMPILE:-arm-none-linux-gnueabi-}objcopy --gap-fill=0xFF -O binary vmlinux1.elf vmlinux1.bin

elif [ "$1" == "cpu0amp" ] ; then
	echo "Creating vmlinux.bin for CPU0 at 0x400000 start address"
	${CROSS_COMPILE:-arm-none-linux-gnueabi-}objcopy -R .note.gnu.build-id -R .comment -R .ARM.attributes --change-addresses -0xBC000000 vmlinux vmlinux.elf
	${CROSS_COMPILE:-arm-none-linux-gnueabi-}objcopy --gap-fill=0xFF -O binary vmlinux.elf vmlinux.bin
else
	echo "Creating vmlinux.bin for CPU0 at 0 start address"
	${CROSS_COMPILE:-arm-none-linux-gnueabi-}objcopy -R .note.gnu.build-id -R .comment -R .ARM.attributes --change-addresses -0xC0000000 vmlinux vmlinux.elf
	${CROSS_COMPILE:-arm-none-linux-gnueabi-}objcopy --gap-fill=0xFF -O binary vmlinux.elf vmlinux.bin
fi
back to top