Revision aa76042a016474775ccd187c068669148c30c3bb authored by James Hogan on 27 May 2016, 21:25:23 UTC, committed by Ralf Baechle on 28 May 2016, 10:35:11 UTC
The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7537b ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13364/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
1 parent 6446e6c
file_table.c
/*
* linux/fs/file_table.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/security.h>
#include <linux/eventpoll.h>
#include <linux/rcupdate.h>
#include <linux/mount.h>
#include <linux/capability.h>
#include <linux/cdev.h>
#include <linux/fsnotify.h>
#include <linux/sysctl.h>
#include <linux/percpu_counter.h>
#include <linux/percpu.h>
#include <linux/hardirq.h>
#include <linux/task_work.h>
#include <linux/ima.h>
#include <linux/swap.h>
#include <linux/atomic.h>
#include "internal.h"
/* sysctl tunables... */
struct files_stat_struct files_stat = {
.max_files = NR_FILE
};
/* SLAB cache for file structures */
static struct kmem_cache *filp_cachep __read_mostly;
static struct percpu_counter nr_files __cacheline_aligned_in_smp;
static void file_free_rcu(struct rcu_head *head)
{
struct file *f = container_of(head, struct file, f_u.fu_rcuhead);
put_cred(f->f_cred);
kmem_cache_free(filp_cachep, f);
}
static inline void file_free(struct file *f)
{
percpu_counter_dec(&nr_files);
call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}
/*
* Return the total number of open files in the system
*/
static long get_nr_files(void)
{
return percpu_counter_read_positive(&nr_files);
}
/*
* Return the maximum number of open files in the system
*/
unsigned long get_max_files(void)
{
return files_stat.max_files;
}
EXPORT_SYMBOL_GPL(get_max_files);
/*
* Handle nr_files sysctl
*/
#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
int proc_nr_files(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
files_stat.nr_files = get_nr_files();
return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
}
#else
int proc_nr_files(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
#endif
/* Find an unused file structure and return a pointer to it.
* Returns an error pointer if some error happend e.g. we over file
* structures limit, run out of memory or operation is not permitted.
*
* Be very careful using this. You are responsible for
* getting write access to any mount that you might assign
* to this filp, if it is opened for write. If this is not
* done, you will imbalance int the mount's writer count
* and a warning at __fput() time.
*/
struct file *get_empty_filp(void)
{
const struct cred *cred = current_cred();
static long old_max;
struct file *f;
int error;
/*
* Privileged users can go above max_files
*/
if (get_nr_files() >= files_stat.max_files && !capable(CAP_SYS_ADMIN)) {
/*
* percpu_counters are inaccurate. Do an expensive check before
* we go and fail.
*/
if (percpu_counter_sum_positive(&nr_files) >= files_stat.max_files)
goto over;
}
f = kmem_cache_zalloc(filp_cachep, GFP_KERNEL);
if (unlikely(!f))
return ERR_PTR(-ENOMEM);
percpu_counter_inc(&nr_files);
f->f_cred = get_cred(cred);
error = security_file_alloc(f);
if (unlikely(error)) {
file_free(f);
return ERR_PTR(error);
}
atomic_long_set(&f->f_count, 1);
rwlock_init(&f->f_owner.lock);
spin_lock_init(&f->f_lock);
mutex_init(&f->f_pos_lock);
eventpoll_init_file(f);
/* f->f_version: 0 */
return f;
over:
/* Ran out of filps - report that */
if (get_nr_files() > old_max) {
pr_info("VFS: file-max limit %lu reached\n", get_max_files());
old_max = get_nr_files();
}
return ERR_PTR(-ENFILE);
}
/**
* alloc_file - allocate and initialize a 'struct file'
*
* @path: the (dentry, vfsmount) pair for the new file
* @mode: the mode with which the new file will be opened
* @fop: the 'struct file_operations' for the new file
*/
struct file *alloc_file(struct path *path, fmode_t mode,
const struct file_operations *fop)
{
struct file *file;
file = get_empty_filp();
if (IS_ERR(file))
return file;
file->f_path = *path;
file->f_inode = path->dentry->d_inode;
file->f_mapping = path->dentry->d_inode->i_mapping;
if ((mode & FMODE_READ) &&
likely(fop->read || fop->read_iter))
mode |= FMODE_CAN_READ;
if ((mode & FMODE_WRITE) &&
likely(fop->write || fop->write_iter))
mode |= FMODE_CAN_WRITE;
file->f_mode = mode;
file->f_op = fop;
if ((mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_inc(path->dentry->d_inode);
return file;
}
EXPORT_SYMBOL(alloc_file);
/* the real guts of fput() - releasing the last reference to file
*/
static void __fput(struct file *file)
{
struct dentry *dentry = file->f_path.dentry;
struct vfsmount *mnt = file->f_path.mnt;
struct inode *inode = file->f_inode;
might_sleep();
fsnotify_close(file);
/*
* The function eventpoll_release() should be the first called
* in the file cleanup chain.
*/
eventpoll_release(file);
locks_remove_file(file);
if (unlikely(file->f_flags & FASYNC)) {
if (file->f_op->fasync)
file->f_op->fasync(-1, file, 0);
}
ima_file_free(file);
if (file->f_op->release)
file->f_op->release(inode, file);
security_file_free(file);
if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
!(file->f_mode & FMODE_PATH))) {
cdev_put(inode->i_cdev);
}
fops_put(file->f_op);
put_pid(file->f_owner.pid);
if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_dec(inode);
if (file->f_mode & FMODE_WRITER) {
put_write_access(inode);
__mnt_drop_write(mnt);
}
file->f_path.dentry = NULL;
file->f_path.mnt = NULL;
file->f_inode = NULL;
file_free(file);
dput(dentry);
mntput(mnt);
}
static LLIST_HEAD(delayed_fput_list);
static void delayed_fput(struct work_struct *unused)
{
struct llist_node *node = llist_del_all(&delayed_fput_list);
struct llist_node *next;
for (; node; node = next) {
next = llist_next(node);
__fput(llist_entry(node, struct file, f_u.fu_llist));
}
}
static void ____fput(struct callback_head *work)
{
__fput(container_of(work, struct file, f_u.fu_rcuhead));
}
/*
* If kernel thread really needs to have the final fput() it has done
* to complete, call this. The only user right now is the boot - we
* *do* need to make sure our writes to binaries on initramfs has
* not left us with opened struct file waiting for __fput() - execve()
* won't work without that. Please, don't add more callers without
* very good reasons; in particular, never call that with locks
* held and never call that from a thread that might need to do
* some work on any kind of umount.
*/
void flush_delayed_fput(void)
{
delayed_fput(NULL);
}
static DECLARE_DELAYED_WORK(delayed_fput_work, delayed_fput);
void fput(struct file *file)
{
if (atomic_long_dec_and_test(&file->f_count)) {
struct task_struct *task = current;
if (likely(!in_interrupt() && !(task->flags & PF_KTHREAD))) {
init_task_work(&file->f_u.fu_rcuhead, ____fput);
if (!task_work_add(task, &file->f_u.fu_rcuhead, true))
return;
/*
* After this task has run exit_task_work(),
* task_work_add() will fail. Fall through to delayed
* fput to avoid leaking *file.
*/
}
if (llist_add(&file->f_u.fu_llist, &delayed_fput_list))
schedule_delayed_work(&delayed_fput_work, 1);
}
}
/*
* synchronous analog of fput(); for kernel threads that might be needed
* in some umount() (and thus can't use flush_delayed_fput() without
* risking deadlocks), need to wait for completion of __fput() and know
* for this specific struct file it won't involve anything that would
* need them. Use only if you really need it - at the very least,
* don't blindly convert fput() by kernel thread to that.
*/
void __fput_sync(struct file *file)
{
if (atomic_long_dec_and_test(&file->f_count)) {
struct task_struct *task = current;
BUG_ON(!(task->flags & PF_KTHREAD));
__fput(file);
}
}
EXPORT_SYMBOL(fput);
void put_filp(struct file *file)
{
if (atomic_long_dec_and_test(&file->f_count)) {
security_file_free(file);
file_free(file);
}
}
void __init files_init(void)
{
filp_cachep = kmem_cache_create("filp", sizeof(struct file), 0,
SLAB_HWCACHE_ALIGN | SLAB_PANIC, NULL);
percpu_counter_init(&nr_files, 0, GFP_KERNEL);
}
/*
* One file with associated inode and dcache is very roughly 1K. Per default
* do not use more than 10% of our memory for files.
*/
void __init files_maxfiles_init(void)
{
unsigned long n;
unsigned long memreserve = (totalram_pages - nr_free_pages()) * 3/2;
memreserve = min(memreserve, totalram_pages - 1);
n = ((totalram_pages - memreserve) * (PAGE_SIZE / 1024)) / 10;
files_stat.max_files = max_t(unsigned long, n, NR_FILE);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...