Revision aab7a2414ba0d5c3d0571a90031b535adba7146a authored by Kuninori Morimoto on 28 September 2018, 02:38:36 UTC, committed by Simon Horman on 05 November 2018, 14:08:44 UTC
hscif2 has 4 dmas, but has only 2 dma-names. This patch add missing dma-names. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e0f0bda79337701a ("arm64: dts: renesas: r8a7795: sort subnodes of the soc node") Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
1 parent 6510223
uio_aec.c
/*
* uio_aec.c -- simple driver for Adrienne Electronics Corp time code PCI device
*
* Copyright (C) 2008 Brandon Philips <brandon@ifup.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/cdev.h>
#include <linux/fs.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/uio_driver.h>
#include <linux/slab.h>
#define PCI_VENDOR_ID_AEC 0xaecb
#define PCI_DEVICE_ID_AEC_VITCLTC 0x6250
#define INT_ENABLE_ADDR 0xFC
#define INT_ENABLE 0x10
#define INT_DISABLE 0x0
#define INT_MASK_ADDR 0x2E
#define INT_MASK_ALL 0x3F
#define INTA_DRVR_ADDR 0xFE
#define INTA_ENABLED_FLAG 0x08
#define INTA_FLAG 0x01
#define MAILBOX 0x0F
static struct pci_device_id ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AEC, PCI_DEVICE_ID_AEC_VITCLTC), },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, ids);
static irqreturn_t aectc_irq(int irq, struct uio_info *dev_info)
{
void __iomem *int_flag = dev_info->priv + INTA_DRVR_ADDR;
unsigned char status = ioread8(int_flag);
if ((status & INTA_ENABLED_FLAG) && (status & INTA_FLAG)) {
/* application writes 0x00 to 0x2F to get next interrupt */
status = ioread8(dev_info->priv + MAILBOX);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static void print_board_data(struct pci_dev *pdev, struct uio_info *i)
{
dev_info(&pdev->dev, "PCI-TC board vendor: %x%x number: %x%x"
" revision: %c%c\n",
ioread8(i->priv + 0x01),
ioread8(i->priv + 0x00),
ioread8(i->priv + 0x03),
ioread8(i->priv + 0x02),
ioread8(i->priv + 0x06),
ioread8(i->priv + 0x07));
}
static int probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct uio_info *info;
int ret;
info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
if (pci_enable_device(pdev))
goto out_free;
if (pci_request_regions(pdev, "aectc"))
goto out_disable;
info->name = "aectc";
info->port[0].start = pci_resource_start(pdev, 0);
if (!info->port[0].start)
goto out_release;
info->priv = pci_iomap(pdev, 0, 0);
if (!info->priv)
goto out_release;
info->port[0].size = pci_resource_len(pdev, 0);
info->port[0].porttype = UIO_PORT_GPIO;
info->version = "0.0.1";
info->irq = pdev->irq;
info->irq_flags = IRQF_SHARED;
info->handler = aectc_irq;
print_board_data(pdev, info);
ret = uio_register_device(&pdev->dev, info);
if (ret)
goto out_unmap;
iowrite32(INT_ENABLE, info->priv + INT_ENABLE_ADDR);
iowrite8(INT_MASK_ALL, info->priv + INT_MASK_ADDR);
if (!(ioread8(info->priv + INTA_DRVR_ADDR)
& INTA_ENABLED_FLAG))
dev_err(&pdev->dev, "aectc: interrupts not enabled\n");
pci_set_drvdata(pdev, info);
return 0;
out_unmap:
pci_iounmap(pdev, info->priv);
out_release:
pci_release_regions(pdev);
out_disable:
pci_disable_device(pdev);
out_free:
kfree(info);
return -ENODEV;
}
static void remove(struct pci_dev *pdev)
{
struct uio_info *info = pci_get_drvdata(pdev);
/* disable interrupts */
iowrite8(INT_DISABLE, info->priv + INT_MASK_ADDR);
iowrite32(INT_DISABLE, info->priv + INT_ENABLE_ADDR);
/* read mailbox to ensure board drops irq */
ioread8(info->priv + MAILBOX);
uio_unregister_device(info);
pci_release_regions(pdev);
pci_disable_device(pdev);
iounmap(info->priv);
kfree(info);
}
static struct pci_driver pci_driver = {
.name = "aectc",
.id_table = ids,
.probe = probe,
.remove = remove,
};
module_pci_driver(pci_driver);
MODULE_LICENSE("GPL");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...