Revision ab37a7a890c1176144a4c66ff3d51ef2c20ed486 authored by Stefan Wahren on 10 July 2021, 11:04:55 UTC, committed by Arnd Bergmann on 16 July 2021, 21:02:53 UTC
The usage of usb-nop-xceiv PHY on Raspberry Pi boards with BCM283x has
been a "regression source" a lot of times. The last case is breakage of
USB mass storage boot has been commit e590474768f1 ("driver core: Set
fw_devlink=on by default") for multi_v7_defconfig. As long as
NOP_USB_XCEIV is configured as module, the dwc2 USB driver defer probing
endlessly and prevent booting from USB mass storage device. So make
the driver built-in as in bcm2835_defconfig and arm64/defconfig.
Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
Reported-by: Ojaswin Mujoo <ojaswin98@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1625915095-23077-1-git-send-email-stefan.wahren@i2se.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1 parent 042f2e1
| File | Mode | Size |
|---|---|---|
| ila | ||
| netfilter | ||
| Kconfig | -rw-r--r-- | 9.4 KB |
| Makefile | -rw-r--r-- | 1.8 KB |
| addrconf.c | -rw-r--r-- | 175.7 KB |
| addrconf_core.c | -rw-r--r-- | 8.3 KB |
| addrlabel.c | -rw-r--r-- | 15.6 KB |
| af_inet6.c | -rw-r--r-- | 30.8 KB |
| ah6.c | -rw-r--r-- | 17.8 KB |
| anycast.c | -rw-r--r-- | 12.9 KB |
| calipso.c | -rw-r--r-- | 37.8 KB |
| datagram.c | -rw-r--r-- | 25.2 KB |
| esp6.c | -rw-r--r-- | 28.7 KB |
| esp6_offload.c | -rw-r--r-- | 9.3 KB |
| exthdrs.c | -rw-r--r-- | 31.5 KB |
| exthdrs_core.c | -rw-r--r-- | 7.5 KB |
| exthdrs_offload.c | -rw-r--r-- | 711 bytes |
| fib6_notifier.c | -rw-r--r-- | 1.5 KB |
| fib6_rules.c | -rw-r--r-- | 12.1 KB |
| fou6.c | -rw-r--r-- | 5.1 KB |
| icmp.c | -rw-r--r-- | 28.9 KB |
| inet6_connection_sock.c | -rw-r--r-- | 4.2 KB |
| inet6_hashtables.c | -rw-r--r-- | 9.2 KB |
| ip6_checksum.c | -rw-r--r-- | 3.5 KB |
| ip6_fib.c | -rw-r--r-- | 62.6 KB |
| ip6_flowlabel.c | -rw-r--r-- | 20.4 KB |
| ip6_gre.c | -rw-r--r-- | 58.2 KB |
| ip6_icmp.c | -rw-r--r-- | 2.0 KB |
| ip6_input.c | -rw-r--r-- | 14.0 KB |
| ip6_offload.c | -rw-r--r-- | 11.0 KB |
| ip6_offload.h | -rw-r--r-- | 302 bytes |
| ip6_output.c | -rw-r--r-- | 50.7 KB |
| ip6_tunnel.c | -rw-r--r-- | 57.8 KB |
| ip6_udp_tunnel.c | -rw-r--r-- | 2.7 KB |
| ip6_vti.c | -rw-r--r-- | 31.5 KB |
| ip6mr.c | -rw-r--r-- | 58.9 KB |
| ipcomp6.c | -rw-r--r-- | 4.9 KB |
| ipv6_sockglue.c | -rw-r--r-- | 31.9 KB |
| mcast.c | -rw-r--r-- | 75.7 KB |
| mcast_snoop.c | -rw-r--r-- | 4.4 KB |
| mip6.c | -rw-r--r-- | 10.1 KB |
| ndisc.c | -rw-r--r-- | 48.8 KB |
| netfilter.c | -rw-r--r-- | 6.6 KB |
| output_core.c | -rw-r--r-- | 3.7 KB |
| ping.c | -rw-r--r-- | 7.1 KB |
| proc.c | -rw-r--r-- | 10.4 KB |
| protocol.c | -rw-r--r-- | 1.9 KB |
| raw.c | -rw-r--r-- | 30.3 KB |
| reassembly.c | -rw-r--r-- | 14.8 KB |
| route.c | -rw-r--r-- | 165.9 KB |
| rpl.c | -rw-r--r-- | 3.2 KB |
| rpl_iptunnel.c | -rw-r--r-- | 8.0 KB |
| seg6.c | -rw-r--r-- | 10.0 KB |
| seg6_hmac.c | -rw-r--r-- | 9.5 KB |
| seg6_iptunnel.c | -rw-r--r-- | 11.8 KB |
| seg6_local.c | -rw-r--r-- | 45.3 KB |
| sit.c | -rw-r--r-- | 47.1 KB |
| syncookies.c | -rw-r--r-- | 7.4 KB |
| sysctl_net_ipv6.c | -rw-r--r-- | 8.3 KB |
| tcp_ipv6.c | -rw-r--r-- | 58.0 KB |
| tcpv6_offload.c | -rw-r--r-- | 1.9 KB |
| tunnel6.c | -rw-r--r-- | 7.0 KB |
| udp.c | -rw-r--r-- | 44.7 KB |
| udp_impl.h | -rw-r--r-- | 1.0 KB |
| udp_offload.c | -rw-r--r-- | 5.5 KB |
| udplite.c | -rw-r--r-- | 2.9 KB |
| xfrm6_input.c | -rw-r--r-- | 6.0 KB |
| xfrm6_output.c | -rw-r--r-- | 2.2 KB |
| xfrm6_policy.c | -rw-r--r-- | 6.7 KB |
| xfrm6_protocol.c | -rw-r--r-- | 7.4 KB |
| xfrm6_state.c | -rw-r--r-- | 699 bytes |
| xfrm6_tunnel.c | -rw-r--r-- | 9.7 KB |
Computing file changes ...
