Revision aba8e906508bfd21692f4546a66e30524e535e6f authored by Tony Kelman on 26 January 2016, 07:17:06 UTC, committed by Tony Kelman on 26 January 2016, 07:20:09 UTC
This reverts commit dfba26bde58b9b9fae66001b136c67391243c394. This is a detail of the out of tree builds which only exist on master. Any backport that relies on this was not resolved correctly for release-0.4.
1 parent 57fc0bc
Makefile
## high-level setup ##
JULIAHOME = $(abspath ..)
include Versions.make
include $(JULIAHOME)/Make.inc
# Special comments:
#
# all targets in here should follow the same structure,
# and provide a get-a, configure-a, compile-a, check-a, and install-a
# additionally all targets should be listed in the getall target for easier off-line compilation
# if you are adding a new target, it can help to copy an similar, existing target
#
# autoconf configure-driven scripts: llvm pcre arpack fftw unwind gmp mpfr patchelf libuv
# custom Makefile rules: openlibm Rmath-julia dsfmt suitesparse-wrapper suitesparse lapack openblas utf8proc objconv
# CMake libs: libgit2
#
# downloaded from git: llvm-svn, libuv, libopenlibm, utf8proc, openspecfun
#
# there are rules in this file with the . replaced by a %
# this is some magic Makefile trick that tells make
# that all targets with a % in them on that line will
# be rebuilt in a single invocation
#
## Some shared configuration options ##
CONFIGURE_COMMON = --prefix=$(abspath $(build_prefix)) --build=$(BUILD_MACHINE) --libdir=$(abspath $(build_libdir)) $(CUSTOM_LD_LIBRARY_PATH)
ifneq ($(XC_HOST),)
CONFIGURE_COMMON += --host=$(XC_HOST)
endif
ifeq ($(OS),WINNT)
ifneq ($(USEMSVC), 1)
CONFIGURE_COMMON += LDFLAGS="$(LDFLAGS) -Wl,--stack,8388608"
endif
endif
CONFIGURE_COMMON += F77="$(FC)" CC="$(CC) $(DEPS_CFLAGS)" CXX="$(CXX) $(DEPS_CXXFLAGS)"
CMAKE_CC_ARG = $(CC_ARG) $(DEPS_CFLAGS)
CMAKE_CXX_ARG = $(CXX_ARG) $(DEPS_CXXFLAGS)
CMAKE_COMMON = -DCMAKE_INSTALL_PREFIX:PATH=$(build_prefix) -DCMAKE_BUILD_TYPE=Release
ifneq ($(VERBOSE), 0)
CMAKE_COMMON += -DCMAKE_VERBOSE_MAKEFILE=ON
endif
CMAKE_COMMON += -DCMAKE_C_COMPILER="$(CC_BASE)"
ifneq ($(strip $(CMAKE_CC_ARG)),)
CMAKE_COMMON += -DCMAKE_C_COMPILER_ARG1="$(CMAKE_CC_ARG)"
endif
CMAKE_COMMON += -DCMAKE_CXX_COMPILER="$(CXX_BASE)"
ifneq ($(strip $(CMAKE_CXX_ARG)),)
CMAKE_COMMON += -DCMAKE_CXX_COMPILER_ARG1="$(CMAKE_CXX_ARG)"
endif
# For now this is LLVM specific, but I expect it won't be in the future
ifneq ($(LLVM_USE_CMAKE),)
ifeq ($(CMAKE_GENERATOR),Ninja)
CMAKE_GENERATOR_COMMAND = -G Ninja
else ifeq ($(CMAKE_GENERATOR),make)
CMAKE_GENERATOR_COMMAND = -G "Unix Makefiles"
else
$(error Unknown CMake generator '$(CMAKE_GENERATOR)'. Options are 'Ninja' and 'make')
endif
endif
# If the top-level Makefile is called with environment variables,
# they will override the values passed above to ./configure
MAKE_COMMON = DESTDIR="" prefix=$(build_prefix) bindir=$(build_bindir) libdir=$(build_libdir) libexecdir=$(build_libexecdir) datarootdir=$(build_datarootdir) includedir=$(build_includedir) sysconfdir=$(build_sysconfdir)
## Overall configuration of which rules exist and should be run by default ##
# prevent installing libs into usr/lib64 on opensuse
unexport CONFIG_SITE
ifeq ($(USE_GPL_LIBS), 1)
STAGE1_DEPS =
STAGE2_DEPS = Rmath-julia
STAGE3_DEPS = suitesparse-wrapper
else
STAGE1_DEPS =
STAGE2_DEPS =
STAGE3_DEPS =
endif
ifeq ($(USE_SYSTEM_LIBUV), 0)
STAGE1_DEPS += libuv
endif
ifeq ($(USE_SYSTEM_LIBUNWIND), 0)
ifeq ($(OS), Linux)
STAGE1_DEPS += unwind
else ifeq ($(OS), FreeBSD)
STAGE1_DEPS += unwind
else ifeq ($(OS), Darwin)
STAGE1_DEPS += osxunwind
endif
endif
ifeq ($(OS), Linux)
ifeq ($(USE_SYSTEM_PATCHELF), 0)
STAGE1_DEPS += patchelf
PATCHELF=$(build_bindir)/patchelf
else
PATCHELF=patchelf
endif
endif
## USE_SYSTEM_LIBS options
ifeq ($(USE_SYSTEM_OPENLIBM), 0)
ifeq ($(USE_SYSTEM_LIBM), 0)
STAGE1_DEPS += openlibm
endif
endif
ifeq ($(USE_SYSTEM_OPENSPECFUN), 0)
STAGE1_DEPS += openspecfun
endif
ifeq ($(USE_SYSTEM_DSFMT), 0)
STAGE1_DEPS += dsfmt
endif
ifeq ($(USE_SYSTEM_LLVM), 0)
STAGE1_DEPS += llvm
endif
ifeq ($(USE_SYSTEM_PCRE), 0)
STAGE1_DEPS += pcre
endif
ifeq ($(USE_SYSTEM_BLAS), 0)
STAGE1_DEPS += openblas
ifeq ($(USE_BLAS64), 1)
ifeq ($(OS), Darwin)
STAGE1_DEPS += objconv
endif
endif
endif
ifeq ($(USE_GPL_LIBS), 1)
ifeq ($(USE_SYSTEM_FFTW), 0)
STAGE1_DEPS += fftw
endif
endif
ifeq ($(USE_SYSTEM_GMP), 0)
STAGE1_DEPS += gmp
endif
ifeq ($(USE_SYSTEM_LIBGIT2), 0)
STAGE1_DEPS += libgit2
endif
ifeq ($(USE_SYSTEM_MPFR), 0)
STAGE2_DEPS += mpfr
endif
ifeq ($(USE_SYSTEM_ARPACK), 0)
STAGE2_DEPS += arpack
endif
ifeq ($(USE_GPL_LIBS), 1)
ifeq ($(USE_SYSTEM_SUITESPARSE), 0)
STAGE2_DEPS += suitesparse
endif
endif
ifeq ($(USE_SYSTEM_UTF8PROC), 0)
STAGE2_DEPS += utf8proc
endif
# Only compile standalone LAPACK if we are not using OpenBLAS.
# OpenBLAS otherwise compiles LAPACK as part of its build.
# This is useful where one wants to use the vendor BLAS, but
# build LAPACK as the vendor LAPACK may be too old (eg. Apple vecLib)
ifeq ($(USE_SYSTEM_BLAS), 1)
ifeq ($(USE_SYSTEM_LAPACK), 0)
STAGE2_DEPS += lapack
endif
endif
#Platform specific flags
ifeq ($(OS), WINNT)
LIBTOOL_CCLD = CCLD="$(CC) -no-undefined -avoid-version"
endif
## Common build target prefixes
DEP_LIBS = $(STAGE1_DEPS) $(STAGE2_DEPS) $(STAGE3_DEPS)
default: install | $(build_prefix)
get: $(addprefix get-, $(DEP_LIBS))
configure: $(addprefix configure-, $(DEP_LIBS))
compile: $(addprefix compile-, $(DEP_LIBS))
check: $(addprefix check-, $(DEP_LIBS))
install: $(addprefix install-, $(DEP_LIBS))
cleanall: $(addprefix clean-, $(DEP_LIBS))
distcleanall: $(addprefix distclean-, $(DEP_LIBS))
rm -rf $(build_prefix)
getall: get-llvm get-libuv get-pcre get-openlibm get-openspecfun get-dsfmt get-Rmath-julia get-openblas get-lapack get-fftw get-suitesparse get-arpack get-unwind get-osxunwind get-gmp get-mpfr get-patchelf get-utf8proc get-virtualenv get-objconv get-libgit2
## PATHS ##
# sort is used to remove potential duplicates
DIRS = $(sort $(build_bindir) $(build_libdir) $(build_includedir) $(build_sysconfdir) $(build_datarootdir) $(build_staging))
$(foreach dir,$(DIRS),$(eval $(call dir_target,$(dir))))
$(build_prefix): | $(DIRS)
## A rule for calling `make install` ##
# rule: dependencies
# $(call make-install build-directory,add-args)
# touch -c $@
# this rule ensures that make install is more nearly atomic
# so it's harder to get half-installed (or half-reinstalled) dependencies
MAKE_DESTDIR = "$(build_staging)/$1"
define staged-install
rm -rf $(build_staging)/$1
$2
mkdir -p $(build_prefix)
cp -af $(build_staging)/$1$(build_prefix)/* $(build_prefix)
endef
define make-install
$(call staged-install,$1,+$(MAKE) -C $1 install $(MAKE_COMMON) $2 DESTDIR=$(call MAKE_DESTDIR,$1))
endef
## A rule for making a git-external dependency ##
# call syntax:
# $(eval $(call git-external,dirname,VARNAME,file_from_download,file_from_compile)
# dirname is the folder name to create
# VARNAME is the uppercased variable name prefix
# file_from_download is the name of a file inside the git repo to indicate when it's cloned (relative to dirname)
# file_from_compile is the rule to run to compile the dependency (relative to dirname)
#
# also, in a file named dirname.version, define variables VARNAME_BRANCH and VARNAME_SHA1
#
# also, define a Makefile variable VARNAME_GIT_URL to use as the clone origin
# and a Makefile variable VARNAME_TAR_URL to use as the clone origin when NO_GIT is set
# this will pass along the VARNAME_SHA1 target in $1 for its use
#
# this defines rules for:
# VARNAME_SRC_DIR = source directory for the output
# dirname:
# dirname/file_from_download:
# distclean-dirname:
#
define git-external
include $1.version
ifneq ($(NO_GIT),1)
$2_SRC_DIR = $1
$1:
git clone -q --depth=50 --branch $$($2_BRANCH) $$($2_GIT_URL) $1
touch -c $1/$3
$1/$3: $1.version | $1
cd $1 && git fetch -q $$($2_GIT_URL) $$($2_BRANCH):remotes/origin/$$($2_BRANCH)
cd $1 && git checkout -q --detach $$($2_SHA1)
@[ '$$($2_SHA1)' = "$$$$(cd $1 && git show -s --format='%H' HEAD)" ] || echo $$(WARNCOLOR)'==> warning: SHA1 hash did not match $1.version file'$$(ENDCOLOR)
touch -c $$@
# also allow backwards compatibility with an existing git-submodule:
ifeq (exists, $$(shell [ -d $1/.git ] && echo exists ))
$1/$4: $1/.git/HEAD
endif
ifeq (exists, $$(shell [ -d $$(JULIAHOME)/.git/modules/deps/$1 ] && echo exists ))
$1/$4: $$(JULIAHOME)/.git/modules/deps/$1/HEAD
endif
else # NO_GIT
$2_SRC_DIR = $1-$$($2_SHA1)
$$($2_SRC_DIR).tar.gz:
$$(JLDOWNLOAD) $$@ $$(call $2_TAR_URL,$$($2_SHA1))
$$($2_SRC_DIR)/$3: $$($2_SRC_DIR).tar.gz
$$(JLCHECKSUM) $$($2_SRC_DIR).tar.gz
mkdir -p $$($2_SRC_DIR) && \
$(TAR) -C $$($2_SRC_DIR) --strip-components 1 -xf $$<
touch -c $$@
endif
distclean-$1:
-rm -rf $$($2_SRC_DIR) $$($2_SRC_DIR).tar.gz
endef
## LLVM ##
LLVM_GIT_URL_BASE ?= http://llvm.org/git
LLVM_GIT_URL_LLVM ?= $(LLVM_GIT_URL_BASE)/llvm.git
LLVM_GIT_URL_CLANG ?= $(LLVM_GIT_URL_BASE)/clang.git
LLVM_GIT_URL_COMPILER_RT ?= $(LLVM_GIT_URL_BASE)/compiler-rt.git
LLVM_GIT_URL_LLDB ?= $(LLVM_GIT_URL_BASE)/lldb.git
LLVM_GIT_URL_LIBCXX ?= $(LLVM_GIT_URL_BASE)/libcxx.git
LLVM_GIT_URL_LIBCXXABI ?= $(LLVM_GIT_URL_BASE)/libcxxabi.git
ifeq ($(BUILD_LLDB), 1)
BUILD_LLVM_CLANG = 1
# because it's a build requirement
endif
ifeq ($(LLVM_DEBUG),1)
LLVM_BUILDTYPE = Debug
else
LLVM_BUILDTYPE = Release
endif
ifeq ($(LLVM_ASSERTIONS),1)
LLVM_BUILDTYPE := $(LLVM_BUILDTYPE)+Asserts
endif
LLVM_FLAVOR := $(LLVM_BUILDTYPE)
ifeq ($(LLVM_SANITIZE),1)
ifeq ($(SANITIZE_MEMORY),1)
LLVM_BUILDTYPE := $(LLVM_BUILDTYPE)+MSAN
else
LLVM_BUILDTYPE := $(LLVM_BUILDTYPE)+ASAN
endif
endif
LLVM_LIB_FILE = libLLVMCodeGen.a
ifeq ($(LLVM_USE_CMAKE),1)
LLVM_OBJ_SOURCE = llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE)/lib/$(LLVM_LIB_FILE)
else
LLVM_OBJ_SOURCE = llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE)/$(LLVM_FLAVOR)/lib/$(LLVM_LIB_FILE)
endif
LLVM_OBJ_TARGET = $(build_libdir)/$(LLVM_LIB_FILE)
ifneq ($(LLVM_VER),svn)
ifeq ($(LLVM_VER), 3.3)
LLVM_TAR=llvm-$(LLVM_VER).src.tar.gz
else
LLVM_TAR=llvm-$(LLVM_VER).src.tar.xz
endif
ifeq ($(BUILD_LLDB),1)
ifeq ($(LLVM_VER), 3.3)
LLVM_LLDB_TAR=lldb-$(LLVM_VER).src.tar.gz
else
LLVM_LLDB_TAR=lldb-$(LLVM_VER).src.tar.xz
endif # LLVM_VER == 3.3
endif # BUILD_LLDB
ifeq ($(BUILD_LLVM_CLANG),1)
ifeq ($(LLVM_VER), 3.3)
LLVM_CLANG_TAR=cfe-$(LLVM_VER).src.tar.gz
LLVM_COMPILER_RT_TAR=compiler-rt-$(LLVM_VER).src.tar.gz
else
LLVM_CLANG_TAR=cfe-$(LLVM_VER).src.tar.xz
LLVM_COMPILER_RT_TAR=compiler-rt-$(LLVM_VER).src.tar.xz
endif # LLVM_VER
else
LLVM_CLANG_TAR=
LLVM_COMPILER_RT_TAR=
LLVM_LIBCXX_TAR=
endif # BUILD_LLVM_CLANG
ifeq ($(BUILD_CUSTOM_LIBCXX),1)
LLVM_LIBCXX_TAR=libcxx-$(LLVM_VER).src.tar.gz
endif
endif # LLVM_VER != svn
LLVM_CXXFLAGS = $(CXXFLAGS)
LLVM_CPPFLAGS = $(CPPFLAGS)
LLVM_LDFLAGS = $(LDFLAGS)
LLVM_TARGETS = host
LLVM_TARGET_FLAGS = --enable-targets=$(LLVM_TARGETS)
LLVM_CMAKE += -DLLVM_TARGETS_TO_BUILD:STRING="$(LLVM_TARGETS)" -DCMAKE_BUILD_TYPE="$(LLVM_BUILDTYPE)" -DLLVM_BUILD_LLVM_DYLIB:BOOL=ON -DLLVM_DYLIB_EXPORT_ALL:BOOL=ON
LLVM_FLAGS += --disable-profiling --enable-shared --enable-static $(LLVM_TARGET_FLAGS) --disable-bindings --disable-docs
# LLVM has weird install prefixes (see llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE)/Makefile.config for the full list)
# We map them here to the "normal" ones, which means just prefixing "PROJ_" to the variable name.
LLVM_MFLAGS = PROJ_libdir=$(build_libdir) PROJ_bindir=$(build_bindir) PROJ_includedir=$(build_includedir)
ifeq ($(LLVM_ASSERTIONS), 1)
LLVM_FLAGS += --enable-assertions
LLVM_CMAKE += -DLLVM_ENABLE_ASSERTIONS:BOOL=ON
ifeq ($(OS), WINNT)
LLVM_FLAGS += --disable-embed-stdcxx
endif # OS == WINNT
else
LLVM_FLAGS += --disable-assertions
endif # LLVM_ASSERTIONS
ifeq ($(LLVM_DEBUG), 1)
LLVM_FLAGS += --disable-optimized --enable-debug-symbols --enable-keep-symbols
else
LLVM_FLAGS += --enable-optimized
endif # LLVM_DEBUG
ifeq ($(USE_LIBCPP), 1)
LLVM_FLAGS += --enable-libcpp
endif # USE_LIBCPP
ifeq ($(OS), WINNT)
LLVM_FLAGS += --with-extra-ld-options="-Wl,--stack,8388608" LDFLAGS=""
# turn off shared LLVM on Windows unless explicitly requested
ifneq ($(USE_LLVM_SHLIB),1)
LLVM_FLAGS += --disable-shared
endif
LLVM_CPPFLAGS += -D__USING_SJLJ_EXCEPTIONS__ -D__CRT__NO_INLINE
endif # OS == WINNT
ifeq ($(USE_INTEL_JITEVENTS), 1)
LLVM_FLAGS += --with-intel-jitevents
ifeq ($(OS), WINNT)
LLVM_FLAGS += --disable-threads
endif # OS == WINNT
else
LLVM_FLAGS += --disable-threads
endif # USE_INTEL_JITEVENTS
ifeq ($(BUILD_LLDB),1)
ifeq ($(USECLANG),1)
LLVM_FLAGS += --enable-cxx11
else
LLVM_CXXFLAGS += -std=c++0x
endif # USECLANG
ifeq ($(LLDB_DISABLE_PYTHON),1)
LLVM_CXXFLAGS += -DLLDB_DISABLE_PYTHON
LLVM_CMAKE += -DLLDB_DISABLE_PYTHON=ON
endif # LLDB_DISABLE_PYTHON
endif # BUILD_LLDB
ifeq ($(ARCH), ppc64)
LLVM_CXXFLAGS += -mminimal-toc
endif # ARCH == ppc64
ifeq ($(LLVM_SANITIZE),1)
ifeq ($(SANITIZE_MEMORY),1)
LLVM_CC = CFLAGS="$(CFLAGS) -fsanitize=memory -fsanitize-memory-track-origins"
LLVM_LDFLAGS += -fsanitize=memory -fsanitize-memory-track-origins
LLVM_CXXFLAGS += -fsanitize=memory -fsanitize-memory-track-origins
LLVM_CMAKE += -DLLVM_USE_SANITIZER="MemoryWithOrigins"
else
LLVM_CC = CFLAGS="$(CFLAGS) -fsanitize=address"
LLVM_LDFLAGS += -fsanitize=address
LLVM_CXXFLAGS += -fsanitize=address
LLVM_CMAKE += -DLLVM_USE_SANITIZER="Address"
endif
LLVM_MFLAGS += TOOL_NO_EXPORTS= HAVE_LINK_VERSION_SCRIPT=0
else
LLVM_CC =
endif # LLVM_SANITIZE
ifneq ($(LLVM_CXXFLAGS),)
LLVM_FLAGS += CXXFLAGS="$(LLVM_CXXFLAGS)"
LLVM_MFLAGS += CXXFLAGS="$(LLVM_CXXFLAGS)"
endif # LLVM_CXXFLAGS
LLVM_MFLAGS += $(LLVM_CC)
ifeq ($(BUILD_CUSTOM_LIBCXX),1)
LLVM_LDFLAGS += -Wl,-R$(build_libdir) -lc++ -lc++abi
ifeq ($(USEICC),1)
LLVM_LDFLAGS += -no_cpprt
endif # USEICC
endif # BUILD_CUSTOM_LIBCXX
ifneq ($(LLVM_CPPFLAGS),)
LLVM_FLAGS += CPPFLAGS="$(LLVM_CPPFLAGS)"
LLVM_MFLAGS += CPPFLAGS="$(LLVM_CPPFLAGS)"
endif
ifneq ($(LLVM_LDFLAGS),)
LLVM_FLAGS += LDFLAGS="$(LLVM_LDFLAGS)"
LLVM_MFLAGS += LDFLAGS="$(LLVM_LDFLAGS)"
endif
ifneq ($(LLVM_CLANG_TAR),)
$(LLVM_CLANG_TAR):
$(JLDOWNLOAD) $@ http://llvm.org/releases/$(LLVM_VER)/$@
endif
ifneq ($(LLVM_COMPILER_RT_TAR),)
$(LLVM_COMPILER_RT_TAR):
$(JLDOWNLOAD) $@ http://llvm.org/releases/$(LLVM_VER)/$@
endif
ifneq ($(LLVM_LIBCXX_TAR),)
$(LLVM_LIBCXX_TAR):
$(JLDOWNLOAD) $@ http://llvm.org/releases/$(LLVM_VER)/$@
endif
ifneq ($(LLVM_VER),svn)
$(LLVM_TAR):
$(JLDOWNLOAD) $@ http://llvm.org/releases/$(LLVM_VER)/$@
endif
ifneq ($(LLVM_LLDB_TAR),)
$(LLVM_LLDB_TAR):
$(JLDOWNLOAD) $@ http://llvm.org/releases/$(LLVM_VER)/$@
endif
ifeq ($(BUILD_LLDB),1)
llvm-$(LLVM_VER)/tools/lldb:
llvm-$(LLVM_VER)/configure: llvm-$(LLVM_VER)/tools/lldb
endif
llvm-$(LLVM_VER)/python2_path:
mkdir -p llvm-$(LLVM_VER)/python2_path
-python -c 'import sys; sys.exit(not sys.version_info > (3, 0))' && \
/usr/bin/python2 -c 'import sys; sys.exit(not sys.version_info < (3, 0))' && \
ln -sf /usr/bin/python2 "llvm-$(LLVM_VER)/python2_path/python" && \
ln -sf /usr/bin/python2-config "llvm-$(LLVM_VER)/python2_path/python-config"
LLVM_FLAGS += --with-python="$(shell ./find_python2)"
# LLDB still relies on plenty of python 2.x infrastructure, without checking
ifeq ($(BUILD_LLDB),1)
llvm_python_workaround=llvm-$(LLVM_VER)/python2_path
endif
ifeq ($(BUILD_CUSTOM_LIBCXX),1)
ifeq ($(USEICC),1)
LIBCXX_EXTRA_FLAGS = -Bstatic -lirc -Bdynamic
endif
llvm-$(LLVM_VER)/projects/libcxx: $(LLVM_LIBCXX_TAR) | llvm-svn/configure
([ ! -d llvm-$(LLVM_VER)/projects/libcxx ] && \
git clone $(LLVM_GIT_URL_LIBCXX) llvm-$(LLVM_VER)/projects/libcxx ) || \
(cd llvm-$(LLVM_VER)/projects/libcxx && \
git pull --ff-only)
llvm-$(LLVM_VER)/projects/libcxxabi: $(LLVM_LIBCXXABI_TAR) | llvm-svn/configure
([ ! -d llvm-$(LLVM_VER)/projects/libcxxabi ] && \
git clone $(LLVM_GIT_URL_LIBCXXABI) llvm-$(LLVM_VER)/projects/libcxxabi ) || \
(cd llvm-$(LLVM_VER)/projects/libcxxabi && \
git pull --ff-only)
libcxx-build:
mkdir -p libcxx-build
libcxx-build/Makefile: llvm-$(LLVM_VER)/projects/libcxx | llvm-$(LLVM_VER)/projects/libcxxabi libcxx-build
cd libcxx-build && \
$(CMAKE) -G "Unix Makefiles" $(CMAKE_COMMON) $(LLVM_CMAKE) -DLIBCXX_CXX_ABI=libcxxabi -DLIBCXX_CXX_ABI_INCLUDE_PATHS="../llvm-$(LLVM_VER)/projects/libcxxabi/include" ../llvm-$(LLVM_VER)/projects/libcxx -DCMAKE_SHARED_LINKER_FLAGS="-L$(build_libdir) $(LIBCXX_EXTRA_FLAGS)" -DCMAKE_CXX_FLAGS="$(CXXFLAGS)"
libcxxabi-build:
mkdir -p libcxxabi-build
libcxxabi-build/Makefile: llvm-$(LLVM_VER)/projects/libcxxabi | llvm-$(LLVM_VER)/projects/libcxx libcxxabi-build
cd libcxxabi-build && \
$(CMAKE) -G "Unix Makefiles" $(CMAKE_COMMON) $(LLVM_CMAKE) -DLLVM_ABI_BREAKING_CHECKS="WITH_ASSERTS" -DLLVM_PATH="../llvm-$(LLVM_VER)" ../llvm-$(LLVM_VER)/projects/libcxxabi -DLIBCXXABI_CXX_ABI_LIBRARIES="$(LIBCXX_EXTRA_FLAGS)" -DCMAKE_CXX_FLAGS="$(CXXFLAGS) -std=c++11"
llvm-$(LLVM_VER)/projects/libcxxabi/lib/libc++abi.so.1.0: llvm-$(LLVM_VER)/projects/libcxxabi | llvm-$(LLVM_VER)/projects/libcxx
libcxxabi-build/lib/libc++abi.so.1.0: | libcxxabi-build/Makefile
cd libcxxabi-build && $(MAKE)
$(build_libdir)/libc++abi.so.1.0: libcxxabi-build/lib/libc++abi.so.1.0
cd libcxxabi-build && $(MAKE) install
touch $@
install-libcxxabi: $(build_libdir)/libc++abi.so.1.0
libcxx-build/lib/libc++.so.1.0: | $(build_libdir)/libc++abi.so.1.0 libcxx-build/Makefile
cd libcxx-build && $(MAKE)
$(build_libdir)/libc++.so.1.0: libcxx-build/lib/libc++.so.1.0
cd libcxx-build && $(MAKE) install
touch $@
install-libcxx: $(build_libdir)/libc++.so.1.0
get-libcxx: llvm-$(LLVM_VER)/projects/libcxx
get-libcxxabi: llvm-$(LLVM_VER)/projects/libcxxabi
endif
ifeq ($(BUILD_CUSTOM_LIBCXX),1)
LIBCXX_DEPENDENCY = $(build_libdir)/libc++abi.so.1.0 $(build_libdir)/libc++.so.1.0
LIBCXX_GET_DEPENDENCY = get-libcxx get-libcxxabi
endif
llvm-$(LLVM_VER)/configure: $(LLVM_TAR) $(LLVM_CLANG_TAR) $(LLVM_COMPILER_RT_TAR) $(LLVM_LIBCXX_TAR) $(LLVM_LLDB_TAR)
ifneq ($(LLVM_CLANG_TAR),)
$(JLCHECKSUM) $(LLVM_CLANG_TAR)
endif
ifneq ($(LLVM_COMPILER_RT_TAR),)
$(JLCHECKSUM) $(LLVM_COMPILER_RT_TAR)
endif
ifneq ($(LLVM_LIBCXX_TAR),)
$(JLCHECKSUM) $(LLVM_LIBCXX_TAR)
endif
ifneq ($(LLVM_VER),svn)
$(JLCHECKSUM) $(LLVM_TAR)
endif
ifneq ($(LLVM_LLDB_TAR),)
$(JLCHECKSUM) $(LLVM_LLDB_TAR)
endif
ifneq ($(LLVM_VER),svn)
mkdir -p llvm-$(LLVM_VER) && \
$(TAR) -C llvm-$(LLVM_VER) --strip-components 1 -xf $(LLVM_TAR)
else
([ ! -d llvm-$(LLVM_VER) ] && \
git clone $(LLVM_GIT_URL_LLVM) llvm-$(LLVM_VER) ) || \
(cd llvm-$(LLVM_VER) && \
git pull --ff-only)
ifneq ($(LLVM_GIT_VER),)
(cd llvm-$(LLVM_VER) && \
git checkout $(LLVM_GIT_VER))
endif # LLVM_GIT_VER
endif # LLVM_VER
ifneq ($(LLVM_VER),svn)
ifneq ($(LLVM_CLANG_TAR),)
mkdir -p llvm-$(LLVM_VER)/tools/clang && \
$(TAR) -C llvm-$(LLVM_VER)/tools/clang --strip-components 1 -xf $(LLVM_CLANG_TAR)
endif # LLVM_CLANG_TAR
ifneq ($(LLVM_COMPILER_RT_TAR),)
mkdir -p llvm-$(LLVM_VER)/projects/compiler-rt && \
$(TAR) -C llvm-$(LLVM_VER)/projects/compiler-rt --strip-components 1 -xf $(LLVM_COMPILER_RT_TAR)
endif # LLVM_COMPILER_RT_TAR
ifneq ($(LLVM_LLDB_TAR),)
mkdir -p llvm-$(LLVM_VER)/tools/lldb && \
$(TAR) -C llvm-$(LLVM_VER)/tools/lldb --strip-components 1 -xf $(LLVM_LLDB_TAR)
endif # LLVM_LLDB_TAR
else # LLVM_VER
ifeq ($(BUILD_LLVM_CLANG),1)
([ ! -d llvm-$(LLVM_VER)/tools/clang ] && \
git clone $(LLVM_GIT_URL_CLANG) llvm-$(LLVM_VER)/tools/clang ) || \
(cd llvm-$(LLVM_VER)/tools/clang && \
git pull --ff-only)
([ ! -d llvm-$(LLVM_VER)/projects/compiler-rt ] && \
git clone $(LLVM_GIT_URL_COMPILER_RT) llvm-$(LLVM_VER)/projects/compiler-rt ) || \
(cd llvm-$(LLVM_VER)/projects/compiler-rt && \
git pull --ff-only)
ifneq ($(LLVM_GIT_VER_CLANG),)
(cd llvm-$(LLVM_VER)/tools/clang && \
git checkout $(LLVM_GIT_VER_CLANG))
endif # LLVM_GIT_VER_CLANG
endif # BUILD_LLVM_CLANG
ifeq ($(BUILD_LLDB),1)
([ ! -d llvm-$(LLVM_VER)/tools/lldb ] && \
git clone $(LLVM_GIT_URL_LLDB) llvm-$(LLVM_VER)/tools/lldb ) || \
(cd llvm-$(LLVM_VER)/tools/lldb && \
git pull --ff-only)
ifneq ($(LLVM_GIT_VER_LLDB),)
(cd llvm-$(LLVM_VER)/tools/lldb && \
git checkout $(LLVM_GIT_VER_LLDB))
endif # LLVM_GIT_VER_CLANG
endif # BUILD_LLDB
endif # LLVM_VER
touch -c $@
# Apply version-specific LLVM patches
ifeq ($(LLVM_VER),3.3)
patch -p0 < llvm-3.3.patch
patch -p0 < instcombine-llvm-3.3.patch
patch -p0 < int128-vector.llvm-3.3.patch
(cd llvm-$(LLVM_VER) && patch < ../osx-10.10.llvm-3.3.patch)
ifeq ($(OS),WINNT)
ifeq ($(ARCH),x86_64)
patch -p0 < win64-int128.llvm-3.3.patch
endif # x86_64
endif # WINNT
else ifeq ($(LLVM_VER),3.6.0)
cd llvm-3.6.0 && patch -p1 < ../zerosign-llvm-3.6.0.patch
ifeq ($(OS),WINNT)
ifeq ($(ARCH),x86_64)
cd llvm-3.6.0 && patch -p1 < ../win64-allocas-llvm-3.6.0.patch
endif # x86_64
endif # WINNT
else ifeq ($(LLVM_VER),3.7.1)
(cd llvm-$(LLVM_VER) && patch < ../llvm-3.7.1.patch && patch < ../llvm-3.7.1_2.patch)
endif # LLVM_VER
touch -c $@
# end target llvm-$(LLVM_VER)/configure
LLVM_BUILDDIR = llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE)
ifneq ($(LLVM_USE_CMAKE),)
$(LLVM_BUILDDIR)/CMakeCache.txt: llvm-$(LLVM_VER)/configure | $(llvm_python_workaround) $(LIBCXX_DEPENDENCY)
cd llvm-$(LLVM_VER) && \
mkdir -p build_$(LLVM_BUILDTYPE) && cd build_$(LLVM_BUILDTYPE) && \
export PATH=$(abspath llvm-$(LLVM_VER)/python2_path):$$PATH && \
$(CMAKE) .. $(CMAKE_GENERATOR_COMMAND) $(CMAKE_COMMON) $(LLVM_CMAKE)
touch -c $@
$(LLVM_OBJ_SOURCE): $(LLVM_BUILDDIR)/CMakeCache.txt | $(llvm_python_workaround)
cd llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE) && \
export PATH=$(abspath llvm-$(LLVM_VER)/python2_path):$$PATH && \
$(CMAKE) --build .
touch -c $@
else
$(LLVM_BUILDDIR)/config.status: llvm-$(LLVM_VER)/configure | $(llvm_python_workaround) $(LIBCXX_DEPENDENCY)
cd llvm-$(LLVM_VER) && \
mkdir -p build_$(LLVM_BUILDTYPE) && cd build_$(LLVM_BUILDTYPE) && \
export PATH=$(abspath llvm-$(LLVM_VER)/python2_path):$$PATH && \
../configure $(CONFIGURE_COMMON) $(LLVM_CC) $(LLVM_FLAGS)
touch -c $@
$(LLVM_OBJ_SOURCE): $(LLVM_BUILDDIR)/config.status | $(llvm_python_workaround)
cd llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE) && \
export PATH=$(abspath llvm-$(LLVM_VER)/python2_path):$$PATH && \
$(MAKE) $(LLVM_MFLAGS) $(MAKE_COMMON)
touch -c $@
endif # LLVM_USE_CMAKE
ifeq ($(LLVM_USE_CMAKE),1)
CHECK_COMMAND = $(CMAKE) --build . check
else
CHECK_COMMAND = $(MAKE) $(LLVM_MFLAGS) check
endif
$(LLVM_BUILDDIR)/checked: $(LLVM_OBJ_SOURCE) | $(llvm_python_workaround)
ifeq ($(OS),$(BUILD_OS))
cd llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE) && \
export PATH=$(abspath llvm-$(LLVM_VER)/python2_path):$$PATH && \
$(CHECK_COMMAND)
endif
echo 1 > $@
$(LLVM_OBJ_TARGET): $(LLVM_OBJ_SOURCE) | $(llvm_python_workaround)
ifeq ($(LLVM_USE_CMAKE),1)
$(call staged-install,$(LLVM_BUILDDIR),cd $(LLVM_BUILDDIR) && $(CMAKE) -DCMAKE_INSTALL_PREFIX="$(call MAKE_DESTDIR,$(LLVM_BUILDDIR))$(build_prefix)" -P cmake_install.cmake)
else
$(call make-install,$(LLVM_BUILDDIR),$(LLVM_MFLAGS) PATH="$(abspath llvm-$(LLVM_VER)/python2_path):$$PATH")
endif # LLVM_USE_CMAKE
touch -c $@
reinstall-llvm:
-rm $(LLVM_OBJ_TARGET)
$(MAKE) -s install-llvm
clean-llvm:
-$(MAKE) -C llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE) clean
-rm -f $(build_bindir)/llvm-config
distclean-llvm:
-rm -rf llvm-$(LLVM_VER).tar.gz llvm-$(LLVM_VER).src.tar.gz clang-$(LLVM_VER).src.tar.gz clang-$(LLVM_VER).tar.gz libcxx-$(LLVM_VER).src.tar.gz compiler-rt-$(LLVM_VER).src.tar.gz llvm-$(LLVM_VER)
ifneq ($(LLVM_VER),svn)
get-llvm: $(LLVM_TAR) $(LLVM_CLANG_TAR) $(LLVM_COMPILER_RT_TAR) $(LLVM_LIBCXX_TAR) $(LLVM_LLDB_TAR)
else
get-llvm: llvm-$(LLVM_VER)/configure $(LIBCXX_GET_DEPENDENCY)
endif
configure-llvm: llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE)/config.status
compile-llvm: $(LLVM_OBJ_SOURCE)
check-llvm: llvm-$(LLVM_VER)/build_$(LLVM_BUILDTYPE)/checked
install-llvm: $(LLVM_OBJ_TARGET)
#todo: LLVM make check target is broken on julia.mit.edu (and really slow elsewhere)
update-llvm:
(cd llvm-$(LLVM_VER); git pull --ff-only)
([ -d "llvm-$(LLVM_VER)/tools/clang" ] || exit 0; cd llvm-$(LLVM_VER)/tools/clang; git pull --ff-only)
([ -d "llvm-$(LLVM_VER)/projects/compiler-rt" ] || exit 0; cd llvm-$(LLVM_VER)/projects/compiler-rt; git pull --ff-only)
([ -d "llvm-$(LLVM_VER)/tools/lldb" ] || exit 0; cd llvm-$(LLVM_VER)/tools/lldb; git pull --ff-only)
## LIBUV ##
LIBUV_GIT_URL=git://github.com/JuliaLang/libuv.git
LIBUV_TAR_URL=https://api.github.com/repos/JuliaLang/libuv/tarball/$1
$(eval $(call git-external,libuv,LIBUV,configure,.libs/libuv.la))
UV_SRC_TARGET = $(LIBUV_SRC_DIR)/.libs/libuv.la
UV_OBJ_TARGET = $(build_libdir)/libuv.la
UV_CFLAGS =
ifeq ($(USEMSVC), 1)
UV_CFLAGS += -DBUILDING_UV_SHARED
endif
ifeq ($(USEICC), 1)
UV_CFLAGS += -static-intel
endif
UV_MFLAGS += LDFLAGS="$(LDFLAGS) $(CLDFLAGS) -v"
ifneq ($(UV_CFLAGS),)
UV_MFLAGS += CFLAGS="$(CFLAGS) $(UV_CFLAGS)"
endif
ifneq ($(VERBOSE), 0)
UV_MFLAGS += V=1
endif
ifneq ($(USEMSVC), 1)
UV_FLAGS = $(UV_MFLAGS)
else
UV_FLAGS = --disable-shared $(UV_MFLAGS)
endif
$(LIBUV_SRC_DIR)/config.status: $(LIBUV_SRC_DIR)/configure
touch -c $(LIBUV_SRC_DIR)/aclocal.m4 # touch a few files to prevent autogen from getting called
touch -c $(LIBUV_SRC_DIR)/Makefile.in
touch -c $(LIBUV_SRC_DIR)/configure
cd $(LIBUV_SRC_DIR) && \
./configure --with-pic $(CONFIGURE_COMMON) $(UV_FLAGS)
touch -c $@
$(UV_SRC_TARGET): $(LIBUV_SRC_DIR)/config.status
$(MAKE) -C $(LIBUV_SRC_DIR) $(UV_MFLAGS)
touch -c $@
$(LIBUV_SRC_DIR)/checked: $(UV_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
-$(MAKE) -C $(LIBUV_SRC_DIR) check
endif
echo 1 > $@
$(UV_OBJ_TARGET): $(UV_SRC_TARGET)
$(call make-install,$(LIBUV_SRC_DIR),)
$(INSTALL_NAME_CMD)libuv.$(SHLIB_EXT) $(build_shlibdir)/libuv.$(SHLIB_EXT)
clean-libuv:
-$(MAKE) -C $(LIBUV_SRC_DIR) clean
-rm -rf $(build_libdir)/libuv.a $(build_libdir)/libuv.la $(build_includedir)/libuv.h $(build_includedir)/libuv-private
get-libuv: $(LIBUV_SRC_DIR)/configure
configure-libuv: $(LIBUV_SRC_DIR)/config.status
compile-libuv: $(UV_SRC_TARGET)
check-libuv: $(LIBUV_SRC_DIR)/checked
install-libuv: $(UV_OBJ_TARGET)
## PCRE ##
PCRE_SRC_TARGET = pcre2-$(PCRE_VER)/.libs/libpcre2-8.$(SHLIB_EXT)
PCRE_OBJ_TARGET = $(build_shlibdir)/libpcre2-8.$(SHLIB_EXT)
# Force optimization for PCRE flags (Issue #11668)
PCRE_CFLAGS = -O3
ifneq ($(OS),WINNT)
PCRE_LDFLAGS = "-Wl,-rpath,'$(build_libdir)'"
endif
pcre2-$(PCRE_VER).tar.bz2:
$(JLDOWNLOAD) $@ https://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre2-$(PCRE_VER).tar.bz2
pcre2-$(PCRE_VER)/configure: pcre2-$(PCRE_VER).tar.bz2
$(JLCHECKSUM) $<
$(TAR) jxf $<
touch -c $@
pcre2-$(PCRE_VER)/config.status: pcre2-$(PCRE_VER)/configure
cd pcre2-$(PCRE_VER) && \
./configure $(CONFIGURE_COMMON) --enable-jit --includedir=$(build_includedir) CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" LDFLAGS="$(LDFLAGS) $(PCRE_LDFLAGS)"
touch -c $@
$(PCRE_SRC_TARGET): pcre2-$(PCRE_VER)/config.status
$(MAKE) -C pcre2-$(PCRE_VER) $(LIBTOOL_CCLD)
touch -c $@
pcre2-$(PCRE_VER)/checked: $(PCRE_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
ifneq ($(OS),WINNT)
$(MAKE) -C pcre2-$(PCRE_VER) check -j1
endif
endif
echo 1 > $@
$(PCRE_OBJ_TARGET): $(PCRE_SRC_TARGET) pcre2-$(PCRE_VER)/checked
$(call make-install,pcre2-$(PCRE_VER),$(LIBTOOL_CCLD))
$(INSTALL_NAME_CMD)libpcre2-8.$(SHLIB_EXT) $@
touch -c $@
clean-pcre:
-$(MAKE) -C pcre2-$(PCRE_VER) clean
-rm -f $(build_shlibdir)/libpcre*
distclean-pcre: clean-pcre
-rm -rf pcre2-$(PCRE_VER).tar.bz2 pcre2-$(PCRE_VER)
get-pcre: pcre2-$(PCRE_VER).tar.bz2
configure-pcre: pcre2-$(PCRE_VER)/config.status
compile-pcre: $(PCRE_SRC_TARGET)
check-pcre: pcre2-$(PCRE_VER)/checked
install-pcre: $(PCRE_OBJ_TARGET)
## openlibm ##
OPENLIBM_GIT_URL = git://github.com/JuliaLang/openlibm.git
OPENLIBM_TAR_URL = https://api.github.com/repos/JuliaLang/openlibm/tarball/$1
$(eval $(call git-external,openlibm,OPENLIBM,Makefile,libopenlibm.$(SHLIB_EXT)))
OPENLIBM_OBJ_TARGET = $(build_shlibdir)/libopenlibm.$(SHLIB_EXT) $(build_libdir)/libopenlibm.a
OPENLIBM_OBJ_SOURCE = $(OPENLIBM_SRC_DIR)/libopenlibm.$(SHLIB_EXT)
OPENLIBM_FLAGS = ARCH="$(ARCH)" CC="$(CC)" FC="$(FC)" AR="$(AR)" OS="$(OS)" USECLANG=$(USECLANG) USEGCC=$(USEGCC)
ifeq (CYGWIN,$(findstring CYGWIN,$(BUILD_OS)))
OPENLIBM_FLAGS += OPENLIBM_HOME="$(call cygpath_w,$(abspath $(OPENLIBM_SRC_DIR)))"
endif
$(OPENLIBM_OBJ_SOURCE): $(OPENLIBM_SRC_DIR)/Makefile
$(MAKE) -C $(OPENLIBM_SRC_DIR) $(OPENLIBM_FLAGS) $(MAKE_COMMON)
touch -c $@
$(build_shlibdir)/libopenlibm%$(SHLIB_EXT) $(build_libdir)/libopenlibm%a: $(OPENLIBM_OBJ_SOURCE)
$(call make-install,$(OPENLIBM_SRC_DIR),$(OPENLIBM_FLAGS))
$(INSTALL_NAME_CMD)libopenlibm.$(SHLIB_EXT) $(build_shlibdir)/libopenlibm.$(SHLIB_EXT)
touch -c $(OPENLIBM_OBJ_TARGET)
clean-openlibm:
-$(MAKE) -C $(OPENLIBM_SRC_DIR) distclean $(OPENLIBM_FLAGS)
-rm $(OPENLIBM_OBJ_TARGET)
-rm $(build_libdir)/libopenlibm.a
get-openlibm: $(OPENLIBM_SRC_DIR)/Makefile
configure-openlibm: get-openlibm
compile-openlibm: $(OPENLIBM_OBJ_SOURCE)
check-openlibm: compile-openlibm
install-openlibm: $(OPENLIBM_OBJ_TARGET)
## openspecfun ##
OPENSPECFUN_GIT_URL = git://github.com/JuliaLang/openspecfun.git
OPENSPECFUN_TAR_URL = https://api.github.com/repos/JuliaLang/openspecfun/tarball/$1
$(eval $(call git-external,openspecfun,OPENSPECFUN,Makefile,libopenspecfun.$(SHLIB_EXT)))
# issue 8799
OPENSPECFUN_CFLAGS = -O3 -std=c99
ifeq ($(USEICC),1)
OPENSPECFUN_CFLAGS += -fp-model precise
endif
OPENSPECFUN_OBJ_TARGET = $(build_shlibdir)/libopenspecfun.$(SHLIB_EXT)
OPENSPECFUN_OBJ_SOURCE = $(OPENSPECFUN_SRC_DIR)/libopenspecfun.$(SHLIB_EXT)
OPENSPECFUN_FLAGS = ARCH="$(ARCH)" CC="$(CC)" FC="$(FC)" AR="$(AR)" OS="$(OS)" USECLANG=$(USECLANG) USEGCC=$(USEGCC) FFLAGS="$(JFFLAGS)" CFLAGS="$(CFLAGS) $(OPENSPECFUN_CFLAGS)"
ifeq ($(USE_SYSTEM_LIBM),0)
OPENSPECFUN_FLAGS += USE_OPENLIBM=1
$(OPENSPECFUN_OBJ_SOURCE): $(OPENLIBM_OBJ_TARGET)
endif
$(OPENSPECFUN_OBJ_SOURCE): $(OPENSPECFUN_SRC_DIR)/Makefile
$(MAKE) -C $(OPENSPECFUN_SRC_DIR) $(OPENSPECFUN_FLAGS) $(MAKE_COMMON)
touch -c $@
$(OPENSPECFUN_OBJ_TARGET): $(OPENSPECFUN_OBJ_SOURCE)
$(call make-install,$(OPENSPECFUN_SRC_DIR),$(OPENSPECFUN_FLAGS))
$(INSTALL_NAME_CMD)libopenspecfun.$(SHLIB_EXT) $@
touch -c $@
clean-openspecfun:
-$(MAKE) -C $(OPENSPECFUN_SRC_DIR) distclean $(OPENSPECFUN_FLAGS)
-rm $(OPENSPECFUN_OBJ_TARGET)
-rm $(build_libdir)/libopenspecfun.a
get-openspecfun: $(OPENSPECFUN_SRC_DIR)/Makefile
configure-openspecfun: get-openspecfun
compile-openspecfun: $(OPENSPECFUN_OBJ_SOURCE)
check-openspecfun: compile-openspecfun
install-openspecfun: $(OPENSPECFUN_OBJ_TARGET)
## DSFMT ##
DSFMT_OBJ_TARGET = $(build_shlibdir)/libdSFMT.$(SHLIB_EXT) $(build_includedir)/dSFMT.h
DSFMT_OBJ_SOURCE = dsfmt-$(DSFMT_VER)/libdSFMT.$(SHLIB_EXT)
DSFMT_CFLAGS = $(CFLAGS) -DNDEBUG -DDSFMT_MEXP=19937 $(fPIC) -DDSFMT_DO_NOT_USE_OLD_NAMES
ifneq ($(USEMSVC), 1)
DSFMT_CFLAGS += -O3 -finline-functions -fomit-frame-pointer -fno-strict-aliasing \
--param max-inline-insns-single=1800 -Wmissing-prototypes -Wall -std=c99 -shared
else
DSFMT_CFLAGS += -Wl,-dll,-def:../libdSFMT.def
endif
ifeq ($(ARCH), x86_64)
DSFMT_CFLAGS += -msse2 -DHAVE_SSE2
endif
dsfmt-$(DSFMT_VER).tar.gz:
$(JLDOWNLOAD) $@ http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/SFMT/dSFMT-src-$(DSFMT_VER).tar.gz
touch -c $@
dsfmt-$(DSFMT_VER)/config.status: dsfmt-$(DSFMT_VER).tar.gz
$(JLCHECKSUM) $<
mkdir -p dsfmt-$(DSFMT_VER) && \
$(TAR) -C dsfmt-$(DSFMT_VER) --strip-components 1 -xf dsfmt-$(DSFMT_VER).tar.gz && \
cd dsfmt-$(DSFMT_VER) && patch < ../dSFMT.h.patch && patch < ../dSFMT.c.patch
echo 1 > $@
$(DSFMT_OBJ_SOURCE): dsfmt-$(DSFMT_VER)/config.status
cd dsfmt-$(DSFMT_VER) && \
$(CC) $(CPPFLAGS) $(DSFMT_CFLAGS) $(LDFLAGS) dSFMT.c -o libdSFMT.$(SHLIB_EXT)
$(build_shlibdir)/libdSFMT%$(SHLIB_EXT) $(build_includedir)/dSFMT%h: $(DSFMT_OBJ_SOURCE) | $(build_includedir) $(build_shlibdir)
cp dsfmt-$(DSFMT_VER)/dSFMT.h $(build_includedir)
cp $< $(build_shlibdir)/libdSFMT.$(SHLIB_EXT) && \
$(INSTALL_NAME_CMD)libdSFMT.$(SHLIB_EXT) $(build_shlibdir)/libdSFMT.$(SHLIB_EXT)
clean-dsfmt:
-rm -f dsfmt-$(DSFMT_VER)/libdSFMT.$(SHLIB_EXT)
distclean-dsfmt:
-rm -rf dsfmt*.tar.gz dsfmt-$(DSFMT_VER)
get-dsfmt: dsfmt-$(DSFMT_VER).tar.gz
configure-dsfmt: dsfmt-$(DSFMT_VER)/config.status
compile-dsfmt: $(DSFMT_OBJ_SOURCE)
check-dsfmt: compile-dsfmt
install-dsfmt: $(DSFMT_OBJ_TARGET)
## Rmath-julia ##
RMATH_JULIA_OBJ_TARGET = $(build_shlibdir)/libRmath-julia.$(SHLIB_EXT)
RMATH_JULIA_OBJ_SOURCE = Rmath-julia-$(RMATH_JULIA_VER)/src/libRmath-julia.$(SHLIB_EXT)
ifeq ($(USE_SYSTEM_DSFMT),0)
$(RMATH_JULIA_OBJ_SOURCE): $(DSFMT_OBJ_TARGET)
endif
RMATH_JULIA_FLAGS += CC="$(CC)" USECLANG=$(USECLANG) USEGCC=$(USEGCC) \
OS="$(OS)" ARCH="$(ARCH)" \
USE_DSFMT=1 DSFMT_libdir="$(build_shlibdir)" \
DSFMT_includedir="$(build_includedir)"
Rmath-julia-$(RMATH_JULIA_VER).tar.gz:
$(JLDOWNLOAD) $@ https://api.github.com/repos/JuliaLang/Rmath-julia/tarball/v$(RMATH_JULIA_VER)
$(RMATH_JULIA_OBJ_SOURCE): Rmath-julia-$(RMATH_JULIA_VER).tar.gz
$(JLCHECKSUM) Rmath-julia-$(RMATH_JULIA_VER).tar.gz && \
mkdir -p Rmath-julia-$(RMATH_JULIA_VER) && \
$(TAR) -C Rmath-julia-$(RMATH_JULIA_VER) --strip-components 1 -xf $< && \
$(MAKE) -C Rmath-julia-$(RMATH_JULIA_VER)/src $(RMATH_JULIA_FLAGS) $(MAKE_COMMON) && \
touch -c $@
$(RMATH_JULIA_OBJ_TARGET): $(RMATH_JULIA_OBJ_SOURCE) | $(build_shlibdir)
cp $< $@
$(INSTALL_NAME_CMD)libRmath-julia.$(SHLIB_EXT) $@
clean-Rmath-julia:
-$(MAKE) -C Rmath-julia-$(RMATH_JULIA_VER) clean
distclean-Rmath-julia: clean-Rmath-julia
-rm -rf Rmath-julia-$(RMATH_JULIA_VER).tar.gz Rmath-julia-$(RMATH_JULIA_VER)
get-Rmath-julia: Rmath-julia-$(RMATH_JULIA_VER).tar.gz
configure-Rmath-julia: get-Rmath-julia
compile-Rmath-julia: $(RMATH_JULIA_OBJ_SOURCE)
check-Rmath-julia: compile-Rmath-julia
install-Rmath-julia: $(RMATH_JULIA_OBJ_TARGET)
## objconv ##
OBJCONV_SOURCE = objconv/objconv
OBJCONV_TARGET = $(build_bindir)/objconv
objconv.zip:
$(JLDOWNLOAD) $@ http://www.agner.org/optimize/objconv.zip
objconv/config.status: objconv.zip
unzip -d objconv $<
cd objconv && unzip source.zip
echo 1 > $@
$(OBJCONV_SOURCE): objconv/config.status
cd objconv && $(CXX) -o objconv -O2 *.cpp
$(OBJCONV_TARGET): $(OBJCONV_SOURCE) | $(build_bindir)
cp -f $< $@
clean-objconv:
-rm -f $(OBJCONV_TARGET)
distclean-objconv:
-rm -rf objconv.zip objconv
get-objconv: objconv.zip
configure-objconv: objconv/config.status
compile-objconv: $(OBJCONV_SOURCE)
check-objconv: compile-objconv
install-objconv: $(OBJCONV_TARGET)
## OpenBLAS ##
# LAPACK is built into OpenBLAS by default
OPENBLAS_GIT_URL = git://github.com/xianyi/OpenBLAS.git
OPENBLAS_TAR_URL = https://api.github.com/repos/xianyi/OpenBLAS/tarball/$1
$(eval $(call git-external,openblas,OPENBLAS,Makefile,$(LIBBLASNAME).$(SHLIB_EXT)))
OPENBLAS_OBJ_SOURCE = $(OPENBLAS_SRC_DIR)/$(LIBBLASNAME).$(SHLIB_EXT)
OPENBLAS_OBJ_TARGET = $(build_shlibdir)/$(LIBBLASNAME).$(SHLIB_EXT)
OPENBLAS_BUILD_OPTS = CC="$(CC)" FC="$(FC)" RANLIB="$(RANLIB)" FFLAGS="$(FFLAGS) $(JFFLAGS)" TARGET=$(OPENBLAS_TARGET_ARCH) BINARY=$(BINARY)
# Thread support
ifeq ($(OPENBLAS_USE_THREAD), 1)
OPENBLAS_BUILD_OPTS += USE_THREAD=1
OPENBLAS_BUILD_OPTS += GEMM_MULTITHREADING_THRESHOLD=50
# Maximum number of threads for parallelism
ifneq ($(ARCH),x86_64)
# Assume we can't address much memory to spawn many threads
# It is also unlikely that 32-bit architectures have too many cores
OPENBLAS_BUILD_OPTS += NUM_THREADS=8
else ifeq ($(OS),WINNT)
# Windows seems unable to handle very many
OPENBLAS_BUILD_OPTS += NUM_THREADS=16
else ifeq ($(OS),Darwin)
# This should suffice for the largest macs
OPENBLAS_BUILD_OPTS += NUM_THREADS=16
else
# On linux, try to provision for the largest possible machine currently
OPENBLAS_BUILD_OPTS += NUM_THREADS=16
endif
else
OPENBLAS_BUILD_OPTS += USE_THREAD=0
endif
# don't touch scheduler affinity since we manage this ourselves
OPENBLAS_BUILD_OPTS += NO_AFFINITY=1
# Build for all architectures - required for distribution
ifeq ($(OPENBLAS_DYNAMIC_ARCH), 1)
OPENBLAS_BUILD_OPTS += DYNAMIC_ARCH=1
endif
# 64-bit BLAS interface
ifeq ($(USE_BLAS64), 1)
OPENBLAS_BUILD_OPTS += INTERFACE64=1 SYMBOLSUFFIX="$(OPENBLAS_SYMBOLSUFFIX)" LIBPREFIX="$(LIBBLASNAME)"
ifeq ($(OS), Darwin)
OPENBLAS_BUILD_OPTS += OBJCONV=$(JULIAHOME)/deps/objconv/objconv
$(OPENBLAS_OBJ_SOURCE): $(OBJCONV_SOURCE)
endif
endif
# Decide whether to build for 32-bit or 64-bit arch
ifneq ($(BUILD_OS),$(OS))
OPENBLAS_BUILD_OPTS += OSNAME=$(OS) CROSS=1 HOSTCC=$(HOSTCC)
endif
ifeq ($(OS),WINNT)
ifneq ($(ARCH),x86_64)
OPENBLAS_BUILD_OPTS += CFLAGS="$(CFLAGS) -mincoming-stack-boundary=2"
OPENBLAS_BUILD_OPTS += FFLAGS="$(FFLAGS) -mincoming-stack-boundary=2"
endif
endif
# Debug OpenBLAS
ifeq ($(OPENBLAS_DEBUG), 1)
OPENBLAS_BUILD_OPTS += DEBUG=1
endif
# Allow disabling AVX for older binutils
ifeq ($(OPENBLAS_NO_AVX), 1)
OPENBLAS_BUILD_OPTS += NO_AVX=1 NO_AVX2=1
else ifeq ($(OPENBLAS_NO_AVX2), 1)
OPENBLAS_BUILD_OPTS += NO_AVX2=1
endif
$(OPENBLAS_SRC_DIR)/config.status: $(OPENBLAS_SRC_DIR)/Makefile
ifeq ($(OS),WINNT)
cd $(dir $@) && patch -p1 < ../openblas-win64.patch
endif
perl -i -ple 's/^\s*(EXTRALIB\s*\+=\s*-lSystemStubs)\s*$$/# $$1/g' $(OPENBLAS_SRC_DIR)/Makefile.system
touch $@
$(OPENBLAS_OBJ_SOURCE): $(OPENBLAS_SRC_DIR)/config.status
echo $(MAKE) -C $(OPENBLAS_SRC_DIR) $(OPENBLAS_BUILD_OPTS) # echo first, so we only print the error message below in a failure case
@$(MAKE) -C $(OPENBLAS_SRC_DIR) $(OPENBLAS_BUILD_OPTS) || (echo $(WARNCOLOR)"*** Clean the OpenBLAS build with 'make -C deps clean-openblas'. Rebuild with 'make OPENBLAS_USE_THREAD=0 if OpenBLAS had trouble linking libpthread.so, and with 'make OPENBLAS_TARGET_ARCH=NEHALEM' if there were errors building SandyBridge support. Both these options can also be used simultaneously. ***"$(ENDCOLOR) && false)
touch -c $@
$(OPENBLAS_OBJ_TARGET): $(OPENBLAS_OBJ_SOURCE) | $(build_shlibdir)
cp -f $(OPENBLAS_SRC_DIR)/$(LIBBLASNAME).$(SHLIB_EXT) $(build_shlibdir)
ifeq ($(OS), Linux)
cd $(build_shlibdir) && \
ln -sf $(LIBBLASNAME).$(SHLIB_EXT) $(LIBBLASNAME).$(SHLIB_EXT).0
endif
$(INSTALL_NAME_CMD)$(LIBBLASNAME).$(SHLIB_EXT) $(build_shlibdir)/$(LIBBLASNAME).$(SHLIB_EXT)
clean-openblas:
-$(MAKE) -C $(OPENBLAS_SRC_DIR) clean
get-openblas: $(OPENBLAS_SRC_DIR)/Makefile
configure-openblas: $(OPENBLAS_SRC_DIR)/config.status
compile-openblas: $(OPENBLAS_OBJ_SOURCE)
check-openblas: compile-openblas
install-openblas: $(OPENBLAS_OBJ_TARGET)
## ATLAS (currently 3.10.0) ##
# no threading, with full lapack, shared library
# should always be compiled with (a real) gcc, it's
# configure script will search for the best match
# (gcc 4.7, gcc, clang,ICC/microsoft/others)
ATLAS_OBJ_SOURCE = atlas/build/lib/libsatlas.$(SHLIB_EXT)
ATLAS_OBJ_TARGET = $(build_shlibdir)/libsatlas.$(SHLIB_EXT)
ATLAS_FLAGS = --shared --prefix=$(build_prefix) --cc=gcc -t 0 \
--with-netlib-lapack-tarfile=$(JULIAHOME)/deps/lapack-$(LAPACK_VER).tgz
ifeq ($(OS), WINNT)
ATLAS_FLAGS += -b 32
endif
#force backwards compatibility (pick any 1)
#ATLAS_FLAGS += -V 192 -A 13 # requires SSE2 (P4 & later)
#ATLAS_FLAGS += -V 128 -A 12 # requires SSE1 (P3 & later)
#ATLAS_FLAGS += -V -1 -A 11 # any x87 (PentiumPro or Athlon & later)
#ATLAS_FLAGS += -A 25 # requires Corei132 (Corei232 doesn't have definition yet)
atlas/configure:
git clone git://github.com/vtjnash/atlas-3.10.0.git atlas
ifeq "$(MAKECMDGOALS)" "compile-atlas"
# only allow building atlas as the sole target (without -jN)
# since it internally handles parallelism, for tuning timing accuracy
atlas/build/Make.top: atlas/configure lapack-$(LAPACK_VER).tgz
cd atlas && \
(test -d build || mkdir build) && cd build && \
../configure $(ATLAS_FLAGS)
touch -c $@
$(ATLAS_OBJ_SOURCE): atlas/build/Make.top
$(MAKE) -C atlas/build -j1
touch -c $@
else
$(ATLAS_OBJ_SOURCE):
$(error cannot build atlas in parallel with anything else)
endif
$(ATLAS_OBJ_TARGET): $(ATLAS_OBJ_SOURCE)
cp -f $(ATLAS_OBJ_SOURCE) $@
$(INSTALL_NAME_CMD)libsatlas.$(SHLIB_EXT) $@
clean-atlas:
rm -rf atlas/build
distclean-atlas:
rm -rf atlas
get-atlas: atlas/configure
configure-atlas: atlas/build/Make.top
compile-atlas: $(ATLAS_OBJ_SOURCE)
check-atlas: compile-atlas
install-atlas: $(ATLAS_OBJ_TARGET)
## Mac gfortran BLAS wrapper ##
GFORTBLAS_FFLAGS =
ifeq ($(OS),Darwin)
ifeq ($(USE_SYSTEM_BLAS),1)
ifeq ($(USE_SYSTEM_LAPACK),0)
GFORTBLAS_FFLAGS += -cpp -ffree-line-length-0 -ffixed-line-length-0 \
-Dsasum=sasum_gfort -Dscasum=scasum_gfort \
-Dscnrm2=scnrm2_gfort -Dsdot=sdot_gfort \
-Dsdsdot=sdsdot_gfort -Dsnrm2=snrm2_gfort \
-Dcdotc=cdotc_gfort -Dcdotu=cdotu_gfort \
-Dzdotc=zdotc_gfort -Dzdotu=zdotu_gfort \
\
-DSASUM=SASUM_GFORT -DSCASUM=SCASUM_GFORT \
-DSCNRM2=SCNRM2_GFORT -DSDOT=SDOT_GFORT \
-DSDSDOT=SDSDOT_GFORT -DSNRM2=SNRM2_GFORT \
-DCDOTC=CDOTC_GFORT -DCDOTU=CDOTU_GFORT \
-DZDOTC=ZDOTC_GFORT -DZDOTU=ZDOTU_GFORT
endif
endif
libgfortblas.$(SHLIB_EXT): gfortblas.c gfortblas.alias
$(CC) -Wall -O3 $(CPPFLAGS) $(CFLAGS) $(fPIC) -shared $< -o $@ -pipe \
-Wl,-reexport_framework,Accelerate -Wl,-alias_list,gfortblas.alias
$(build_shlibdir)/libgfortblas.$(SHLIB_EXT): libgfortblas.$(SHLIB_EXT)
cp -f $< $@
$(INSTALL_NAME_CMD)libgfortblas.$(SHLIB_EXT) $@
endif
## LAPACK ##
ifeq ($(USE_SYSTEM_LAPACK), 0)
LAPACK_OBJ_TARGET = $(build_shlibdir)/liblapack.$(SHLIB_EXT)
LAPACK_OBJ_SOURCE = lapack-$(LAPACK_VER)/liblapack.$(SHLIB_EXT)
else
LAPACK_OBJ_TARGET =
LAPACK_OBJ_SOURCE =
endif
LAPACK_MFLAGS = NOOPT="$(FFLAGS) $(JFFLAGS) $(GFORTBLAS_FFLAGS) -O0" OPTS="$(FFLAGS) $(JFFLAGS) $(GFORTBLAS_FFLAGS)" FORTRAN="$(FC)" LOADER="$(FC)"
ifneq ($(OS),WINNT)
LAPACK_MFLAGS += BLASLIB="-Wl,-rpath,'$(build_libdir)' $(LIBBLAS)"
endif
lapack-$(LAPACK_VER).tgz:
$(JLDOWNLOAD) $@ http://www.netlib.org/lapack/$@
lapack-$(LAPACK_VER)/Makefile: lapack-$(LAPACK_VER).tgz
$(JLCHECKSUM) $<
$(TAR) zxf $<
touch -c $@
ifeq ($(USE_SYSTEM_BLAS), 0)
lapack-$(LAPACK_VER)/liblapack.a: | $(OPENBLAS_OBJ_TARGET)
else ifeq ($(OS),Darwin)
lapack-$(LAPACK_VER)/liblapack.a: | $(build_shlibdir)/libgfortblas.$(SHLIB_EXT)
endif
lapack-$(LAPACK_VER)/liblapack.a: lapack-$(LAPACK_VER)/Makefile
cd lapack-$(LAPACK_VER) && \
cp INSTALL/make.inc.gfortran ./make.inc && \
$(MAKE) lapacklib $(LAPACK_MFLAGS)
touch -c $@
lapack-$(LAPACK_VER)/checked: lapack-$(LAPACK_VER)/liblapack.a
cd lapack-$(LAPACK_VER) && \
$(MAKE) lapack_testing $(LAPACK_MFLAGS) -k
touch $@
$(LAPACK_OBJ_SOURCE): lapack-$(LAPACK_VER)/liblapack.a
cd lapack-$(LAPACK_VER) && \
$(FC) -shared $(FFLAGS) $(JFFLAGS) SRC/*.o INSTALL/dlamch.o INSTALL/dsecnd_INT_ETIME.o INSTALL/ilaver.o INSTALL/slamch.o $(LIBBLAS) -o liblapack.$(SHLIB_EXT)
$(LAPACK_OBJ_TARGET): $(LAPACK_OBJ_SOURCE)
cp $< $@
$(INSTALL_NAME_CMD)liblapack.$(SHLIB_EXT) $@
clean-lapack:
-$(MAKE) -C lapack-$(LAPACK_VER) clean
-rm -f $(LAPACK_OBJ_SOURCE) $(LAPACK_OBJ_TARGET)
distclean-lapack:
-rm -rf lapack-$(LAPACK_VER).tgz lapack-$(LAPACK_VER)
get-lapack: lapack-$(LAPACK_VER).tgz
configure-lapack: get-lapack
compile-lapack: $(LAPACK_OBJ_SOURCE)
check-lapack: lapack-$(LAPACK_VER)/checked
install-lapack: $(LAPACK_OBJ_TARGET)
## ARPACK ##
ARPACK_FFLAGS = $(GFORTBLAS_FFLAGS)
ARPACK_CFLAGS =
ifeq ($(USE_BLAS64), 1)
ifeq ($(USEIFC),1)
ARPACK_FFLAGS += -i8
else
ARPACK_FFLAGS += -fdefault-integer-8
ifeq ($(USE_SYSTEM_BLAS), 0)
ifeq ($(OPENBLAS_SYMBOLSUFFIX), 64_)
ARPACK_FFLAGS += -cpp -ffixed-line-length-none
ARPACK_OPENBLASFCNS1 = axpy copy gemv geqr2 lacpy lahqr lanhs larnv lartg lascl laset scal trevc trmm trsen
ARPACK_OPENBLASFCNS2 = dot ger labad laev2 lamch lanst lanv2 lapy2 larf larfg lasr nrm2 orm2r rot steqr swap
ARPACK_OPENBLASFCNS3 = dotc geru unm2r
ARPACK_OPENBLASFCNS4 = COPY LABAD LAMCH LANHS LANV2 LARFG ROT
ARPACK_FFLAGS += $(foreach fcn, $(ARPACK_OPENBLASFCNS1) $(ARPACK_OPENBLASFCNS2), -Ds$(fcn)=s$(fcn)_64 -Dd$(fcn)=d$(fcn)_64)
ARPACK_FFLAGS += $(foreach fcn, $(ARPACK_OPENBLASFCNS1) $(ARPACK_OPENBLASFCNS3), -Dc$(fcn)=c$(fcn)_64 -Dz$(fcn)=z$(fcn)_64)
ARPACK_FFLAGS += $(foreach fcn, $(ARPACK_OPENBLASFCNS4), -DS$(fcn)=S$(fcn)_64 -DD$(fcn)=D$(fcn)_64)
ARPACK_FFLAGS += -Dscnrm2=scnrm2_64 -Ddznrm2=dznrm2_64 -Dcsscal=csscal_64 -Dzdscal=zdscal_64
# CFLAGS are for the configure checks
ARPACK_CFLAGS += -Dsgemm_=sgemm_64_ -Dcheev_=cheev_64_
endif
endif
endif
endif
ifeq ($(OS),WINNT)
ARPACK_OBJ_SOURCE = arpack-ng-$(ARPACK_VER)/.libs/libarpack-2.$(SHLIB_EXT)
else
ARPACK_OBJ_SOURCE = arpack-ng-$(ARPACK_VER)/.libs/libarpack.$(SHLIB_EXT)
endif
ARPACK_OBJ_TARGET = $(build_shlibdir)/libarpack.$(SHLIB_EXT)
ARPACK_MFLAGS = F77="$(FC)" MPIF77="$(FC)"
ARPACK_FFLAGS += $(FFLAGS) $(JFFLAGS)
ARPACK_FLAGS = --with-blas="$(LIBBLAS)" --with-lapack="$(LIBLAPACK)" --disable-mpi --enable-shared FFLAGS="$(ARPACK_FFLAGS)" CFLAGS="$(CFLAGS) $(ARPACK_CFLAGS)"
ifneq ($(OS),WINNT)
ARPACK_FLAGS += LDFLAGS="$(LDFLAGS) -Wl,-rpath,'$(build_libdir)'"
endif
# ARPACK-NG upstream keeps changing their download filenames
arpack-ng-$(ARPACK_VER).tar.gz:
$(JLDOWNLOAD) $@ https://github.com/opencollab/arpack-ng/archive/$(ARPACK_VER).tar.gz
touch -c $@
arpack-ng-$(ARPACK_VER)/configure: arpack-ng-$(ARPACK_VER).tar.gz
$(JLCHECKSUM) $<
$(TAR) zxf $<
touch -c $@
ifeq ($(USE_ATLAS), 1)
arpack-ng-$(ARPACK_VER)/config.status: | $(ATLAS_OBJ_TARGET)
endif
ifeq ($(USE_SYSTEM_BLAS), 0)
arpack-ng-$(ARPACK_VER)/config.status: | $(OPENBLAS_OBJ_TARGET)
else ifeq ($(USE_SYSTEM_LAPACK), 0)
arpack-ng-$(ARPACK_VER)/config.status: | $(LAPACK_OBJ_TARGET)
endif
arpack-ng-$(ARPACK_VER)/config.status: arpack-ng-$(ARPACK_VER)/configure
cd arpack-ng-$(ARPACK_VER) && \
./configure $(CONFIGURE_COMMON) $(ARPACK_FLAGS)
touch -c $@
$(ARPACK_OBJ_SOURCE): arpack-ng-$(ARPACK_VER)/config.status
cd arpack-ng-$(ARPACK_VER) && \
$(MAKE) $(ARPACK_MFLAGS)
touch -c $@
arpack-ng-$(ARPACK_VER)/checked: $(ARPACK_OBJ_SOURCE)
cd arpack-ng-$(ARPACK_VER)
# $(MAKE) check $(ARPACK_MFLAGS) && \
# cd TESTS && $(call spawn,./dnsimp$(EXE))
echo 1 > $@
$(ARPACK_OBJ_TARGET): $(ARPACK_OBJ_SOURCE) arpack-ng-$(ARPACK_VER)/checked | $(build_shlibdir)
$(call make-install,arpack-ng-$(ARPACK_VER),$(ARPACK_MFLAGS))
ifeq ($(OS), WINNT)
mv $(build_shlibdir)/libarpack-2.dll $@
endif
$(INSTALL_NAME_CMD)libarpack.$(SHLIB_EXT) $(build_shlibdir)/libarpack.$(SHLIB_EXT)
ifeq ($(OS), Linux)
for filename in $(build_shlibdir)/libarpack.so* ; do \
[ -L $$filename ] || $(PATCHELF) --set-rpath '$$ORIGIN' $$filename ;\
done
endif
touch -c $@
ifneq ($(PATCHELF),patchelf)
$(ARPACK_OBJ_TARGET): $(PATCHELF)
endif
clean-arpack:
-$(MAKE) -C arpack-ng-$(ARPACK_VER) clean
-rm -f $(ARPACK_OBJ_SOURCE) $(ARPACK_OBJ_TARGET)
distclean-arpack:
-rm -rf arpack-ng-$(ARPACK_VER).tar.gz arpack-ng-$(ARPACK_VER)
get-arpack: arpack-ng-$(ARPACK_VER).tar.gz
configure-arpack: arpack-ng-$(ARPACK_VER)/config.status
compile-arpack: $(ARPACK_OBJ_SOURCE)
check-arpack: arpack-ng-$(ARPACK_VER)/checked
install-arpack: $(ARPACK_OBJ_TARGET)
## FFTW ##
ifeq ($(OS),WINNT)
FFTW_SINGLE_SRC_TARGET = fftw-$(FFTW_VER)-single/.libs/libfftw3f-3.$(SHLIB_EXT)
FFTW_DOUBLE_SRC_TARGET = fftw-$(FFTW_VER)-double/.libs/libfftw3-3.$(SHLIB_EXT)
else
FFTW_SINGLE_SRC_TARGET = fftw-$(FFTW_VER)-single/.libs/libfftw3f.$(SHLIB_EXT)
FFTW_DOUBLE_SRC_TARGET = fftw-$(FFTW_VER)-double/.libs/libfftw3.$(SHLIB_EXT)
endif
FFTW_SINGLE_OBJ_TARGET = $(build_shlibdir)/libfftw3f.$(SHLIB_EXT)
FFTW_DOUBLE_OBJ_TARGET = $(build_shlibdir)/libfftw3.$(SHLIB_EXT)
FFTW_CONFIG = --enable-shared --disable-fortran --disable-mpi --enable-threads
ifneq (,$(findstring arm,$(ARCH)))
FFTW_CONFIG +=
else ifeq ($(ARCH), ppc)
FFTW_CONFIG += --enable-altivec
else ifeq ($(ARCH), x86_64)
FFTW_CONFIG += --enable-sse2 --enable-fma
endif
ifeq ($(OS),WINNT)
FFTW_CONFIG += --with-our-malloc --with-combined-threads
ifneq ($(ARCH),x86_64)
FFTW_CONFIG += --with-incoming-stack-boundary=2
endif
endif
fftw-$(FFTW_VER).tar.gz:
$(JLDOWNLOAD) $@ http://www.fftw.org/$@
fftw-$(FFTW_VER)-single/configure: fftw-$(FFTW_VER).tar.gz
$(JLCHECKSUM) $<
mkdir -p fftw-$(FFTW_VER)-single && \
$(TAR) -C fftw-$(FFTW_VER)-single --strip-components 1 -xf $<
touch -c $@
fftw-$(FFTW_VER)-single/config.status: fftw-$(FFTW_VER)-single/configure
cd fftw-$(FFTW_VER)-single && \
(./configure $(CONFIGURE_COMMON) $(FFTW_CONFIG) --enable-avx --enable-single || \
./configure $(CONFIGURE_COMMON) $(FFTW_CONFIG) --enable-single) && \
$(MAKE) clean
touch -c $@
$(FFTW_SINGLE_SRC_TARGET): fftw-$(FFTW_VER)-single/config.status
$(MAKE) -C fftw-$(FFTW_VER)-single
fftw-$(FFTW_VER)-single/checked: $(FFTW_SINGLE_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
$(MAKE) -C fftw-$(FFTW_VER)-single check
endif
echo 1 > $@
$(FFTW_SINGLE_OBJ_TARGET): $(FFTW_SINGLE_SRC_TARGET) fftw-$(FFTW_VER)-single/checked
$(call make-install,fftw-$(FFTW_VER)-single,)
ifeq ($(OS), Darwin)
$(INSTALL_NAME_CMD)libfftw3f.$(SHLIB_EXT) $(build_shlibdir)/libfftw3f.$(SHLIB_EXT)
$(INSTALL_NAME_CMD)libfftw3f_threads.$(SHLIB_EXT) $(build_shlibdir)/libfftw3f_threads.$(SHLIB_EXT)
$(INSTALL_NAME_CHANGE_CMD) $(build_shlibdir)/libfftw3f.3.$(SHLIB_EXT) $(INSTALL_NAME_ID_DIR)libfftw3f.$(SHLIB_EXT) $(build_shlibdir)/libfftw3f_threads.$(SHLIB_EXT)
else ifeq ($(OS), WINNT)
mv -f $(build_shlibdir)/libfftw3f-3.dll $@
else ifeq ($(OS), Linux)
for filename in $(build_shlibdir)/libfftw3f_threads.so* ; do \
[ -L $$filename ] || $(PATCHELF) --set-rpath '$$ORIGIN' $$filename ;\
done
endif
touch -c $@
fftw-$(FFTW_VER)-double/configure: fftw-$(FFTW_VER).tar.gz
$(JLCHECKSUM) $<
mkdir -p fftw-$(FFTW_VER)-double && \
$(TAR) -C fftw-$(FFTW_VER)-double --strip-components 1 -xf $<
touch -c $@
fftw-$(FFTW_VER)-double/config.status: fftw-$(FFTW_VER)-double/configure
cd fftw-$(FFTW_VER)-double && \
(./configure $(CONFIGURE_COMMON) $(FFTW_CONFIG) --enable-avx || \
./configure $(CONFIGURE_COMMON) $(FFTW_CONFIG)) && \
$(MAKE) clean
touch -c $@
$(FFTW_DOUBLE_SRC_TARGET): fftw-$(FFTW_VER)-double/config.status
$(MAKE) -C fftw-$(FFTW_VER)-double
touch -c $@
fftw-$(FFTW_VER)-double/checked: $(FFTW_DOUBLE_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
$(MAKE) -C fftw-$(FFTW_VER)-double check
endif
echo 1 > $@
$(FFTW_DOUBLE_OBJ_TARGET): $(FFTW_DOUBLE_SRC_TARGET) fftw-$(FFTW_VER)-double/checked
$(call make-install,fftw-$(FFTW_VER)-double,)
ifeq ($(OS), Darwin)
$(INSTALL_NAME_CMD)libfftw3.$(SHLIB_EXT) $(build_shlibdir)/libfftw3.$(SHLIB_EXT)
$(INSTALL_NAME_CMD)libfftw3_threads.$(SHLIB_EXT) $(build_shlibdir)/libfftw3_threads.$(SHLIB_EXT)
$(INSTALL_NAME_CHANGE_CMD) $(build_shlibdir)/libfftw3.3.$(SHLIB_EXT) $(INSTALL_NAME_ID_DIR)libfftw3.$(SHLIB_EXT) $(build_shlibdir)/libfftw3_threads.$(SHLIB_EXT)
else ifeq ($(OS), WINNT)
mv -f $(build_shlibdir)/libfftw3-3.dll $@
else ifeq ($(OS), Linux)
for filename in $(build_shlibdir)/libfftw3_threads.so* ; do \
[ -L $$filename ] || $(PATCHELF) --set-rpath '$$ORIGIN' $$filename ;\
done
endif
touch -c $@
ifneq ($(PATCHELF),patchelf)
$(FFTW_DOUBLE_OBJ_TARGET): $(PATCHELF)
$(FFTW_SINGLE_OBJ_TARGET): $(PATCHELF)
endif
clean-fftw: clean-fftw-single clean-fftw-double
clean-fftw-single:
-$(MAKE) -C fftw-$(FFTW_VER)-single clean
-rm -f $(FFTW_SINGLE_OBJ_TARGET)
clean-fftw-double:
-$(MAKE) -C fftw-$(FFTW_VER)-double clean
-rm -f $(FFTW_DOUBLE_OBJ_TARGET)
distclean-fftw: distclean-fftw-single distclean-fftw-double
distclean-fftw-single:
-rm -rf fftw-$(FFTW_VER).tar.gz fftw-$(FFTW_VER)-single
distclean-fftw-double:
-rm -rf fftw-$(FFTW_VER).tar.gz fftw-$(FFTW_VER)-double
get-fftw: get-fftw-single get-fftw-double
configure-fftw: configure-fftw-single configure-fftw-double
compile-fftw: compile-fftw-single compile-fftw-double
check-fftw: check-fftw-single check-fftw-double
install-fftw: check-fftw-single check-fftw-double
@$(MAKE) -s install-fftw-single
@$(MAKE) -s install-fftw-double
get-fftw-single: fftw-$(FFTW_VER).tar.gz
configure-fftw-single: fftw-$(FFTW_VER)-single/config.status
compile-fftw-single: $(FFTW_SINGLE_OBJ_TARGET)
check-fftw-single: fftw-$(FFTW_VER)-single/checked
install-fftw-single: $(FFTW_SINGLE_OBJ_TARGET)
get-fftw-double: fftw-$(FFTW_VER).tar.gz
configure-fftw-double: fftw-$(FFTW_VER)-double/config.status
compile-fftw-double: $(FFTW_DOUBLE_OBJ_TARGET)
check-fftw-double: fftw-$(FFTW_VER)-double/checked
install-fftw-double: $(FFTW_DOUBLE_OBJ_TARGET)
## UTF8PROC ##
UTF8PROC_GIT_URL = git://github.com/JuliaLang/utf8proc.git
UTF8PROC_TAR_URL = https://api.github.com/repos/JuliaLang/utf8proc/tarball/$1
$(eval $(call git-external,utf8proc,UTF8PROC,Makefile,libutf8proc.a))
UTF8PROC_SRC_TARGET = $(UTF8PROC_SRC_DIR)/libutf8proc.a
UTF8PROC_OBJ_LIB = $(build_libdir)/libutf8proc.a
UTF8PROC_OBJ_HEADER = $(build_includedir)/utf8proc.h
UTF8PROC_OBJ_TARGET = $(UTF8PROC_OBJ_LIB) $(UTF8PROC_OBJ_HEADER)
UTF8PROC_CFLAGS = -O2
$(UTF8PROC_SRC_TARGET): $(UTF8PROC_SRC_DIR)/Makefile
$(MAKE) -C $(UTF8PROC_SRC_DIR) CC="$(CC) $(DEPS_CFLAGS)" CFLAGS="$(CFLAGS) $(UTF8PROC_CFLAGS)" PICFLAG="$(fPIC)" AR="$(AR)" libutf8proc.a
touch -c $@
$(UTF8PROC_SRC_DIR)/checked: $(UTF8PROC_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
-$(MAKE) -C $(UTF8PROC_SRC_DIR) check
endif
echo 1 > $@
$(UTF8PROC_OBJ_LIB): $(UTF8PROC_SRC_TARGET)
cp -f $< $@
$(UTF8PROC_OBJ_HEADER): $(UTF8PROC_SRC_TARGET)
cp -f $(UTF8PROC_SRC_DIR)/utf8proc.h $@
clean-utf8proc:
-$(MAKE) -C $(UTF8PROC_SRC_DIR) clean
-rm -rf $(build_libdir)/libutf8proc.a $(build_includedir)/utf8proc.h
get-utf8proc: $(UTF8PROC_SRC_DIR)/Makefile
configure-utf8proc: get-utf8proc
compile-utf8proc: $(UTF8PROC_SRC_TARGET)
check-utf8proc: $(UTF8PROC_SRC_DIR)/checked
install-utf8proc: $(UTF8PROC_OBJ_TARGET)
## SUITESPARSE ##
SUITESPARSE_OBJ_SOURCE = SuiteSparse-$(SUITESPARSE_VER)/UMFPACK/Lib/libumfpack.a
SUITESPARSE_OBJ_TARGET = $(build_shlibdir)/libspqr.$(SHLIB_EXT)
ifeq ($(USE_BLAS64), 1)
UMFPACK_CONFIG = -DLONGBLAS='long long'
CHOLMOD_CONFIG = -DLONGBLAS='long long'
SPQR_CONFIG = -DLONGBLAS='long long'
ifeq ($(USE_SYSTEM_BLAS), 0)
ifeq ($(OPENBLAS_SYMBOLSUFFIX), 64_)
UMFPACK_CONFIG += -DSUN64
CHOLMOD_CONFIG += -DSUN64
SPQR_CONFIG += -DSUN64
endif
endif
endif
SUITE_SPARSE_LIB = -lm
ifneq ($(OS), Darwin)
ifneq ($(OS), WINNT)
SUITE_SPARSE_LIB += -lrt
endif
endif
ifneq ($(OS), WINNT)
SUITE_SPARSE_LIB += -Wl,-rpath,'$(build_libdir)'
endif
SUITESPARSE_MFLAGS = CC="$(CC)" CXX="$(CXX)" F77="$(FC)" AR="$(AR)" RANLIB="$(RANLIB)" BLAS="$(LIBBLAS)" LAPACK="$(LIBLAPACK)" \
INSTALL_LIB="$(build_libdir)" INSTALL_INCLUDE="$(build_includedir)" LIB="$(SUITE_SPARSE_LIB)" \
UMFPACK_CONFIG="$(UMFPACK_CONFIG)" CHOLMOD_CONFIG="$(CHOLMOD_CONFIG)" SPQR_CONFIG="$(SPQR_CONFIG)"
SuiteSparse-$(SUITESPARSE_VER).tar.gz:
$(JLDOWNLOAD) $@ http://faculty.cse.tamu.edu/davis/SuiteSparse/$@
SuiteSparse-$(SUITESPARSE_VER)/Makefile: SuiteSparse-$(SUITESPARSE_VER).tar.gz
$(JLCHECKSUM) $<
mkdir -p SuiteSparse-$(SUITESPARSE_VER)
$(TAR) -C SuiteSparse-$(SUITESPARSE_VER) --strip-components 1 -zxf $<
touch -c $@
ifeq ($(USE_ATLAS), 1)
$(SUITESPARSE_OBJ_SOURCE): | $(ATLAS_OBJ_TARGET)
endif
ifeq ($(USE_SYSTEM_BLAS), 0)
$(SUITESPARSE_OBJ_SOURCE): | $(OPENBLAS_OBJ_TARGET)
else ifeq ($(USE_SYSTEM_LAPACK), 0)
$(SUITESPARSE_OBJ_SOURCE): | $(LAPACK_OBJ_TARGET)
endif
$(SUITESPARSE_OBJ_SOURCE): SuiteSparse-$(SUITESPARSE_VER)/Makefile
cd SuiteSparse-$(SUITESPARSE_VER) && \
$(MAKE) library $(SUITESPARSE_MFLAGS)
touch -c $@
SuiteSparse-$(SUITESPARSE_VER)/checked: $(SUITESPARSE_OBJ_SOURCE)
cd SuiteSparse-$(SUITESPARSE_VER) && \
$(MAKE) default $(SUITESPARSE_MFLAGS)
touch $@
$(SUITESPARSE_OBJ_TARGET): $(SUITESPARSE_OBJ_SOURCE)
mkdir -p SuiteSparse-$(SUITESPARSE_VER)/lib && \
cd SuiteSparse-$(SUITESPARSE_VER)/lib && \
rm -f *.a && \
cp -f `find .. -name libamd.a -o -name libcolamd.a -o -name libcamd.a -o -name libccolamd.a -o -name libcholmod.a -o -name libumfpack.a -o -name libsuitesparseconfig.a -o -name libspqr.a 2>/dev/null` . && \
$(CC) -shared $(WHOLE_ARCHIVE) libsuitesparseconfig.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libsuitesparseconfig.$(SHLIB_EXT) && \
$(INSTALL_NAME_CMD)libsuitesparseconfig.$(SHLIB_EXT) $(build_shlibdir)/libsuitesparseconfig.$(SHLIB_EXT) && \
$(CC) -shared $(WHOLE_ARCHIVE) libamd.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libamd.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lsuitesparseconfig $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libamd.$(SHLIB_EXT) $(build_shlibdir)/libamd.$(SHLIB_EXT) && \
$(CC) -shared $(WHOLE_ARCHIVE) libcolamd.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libcolamd.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lsuitesparseconfig $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libcolamd.$(SHLIB_EXT) $(build_shlibdir)/libcolamd.$(SHLIB_EXT) && \
$(CC) -shared $(WHOLE_ARCHIVE) libcamd.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libcamd.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lsuitesparseconfig $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libcamd.$(SHLIB_EXT) $(build_shlibdir)/libcamd.$(SHLIB_EXT) && \
$(CC) -shared $(WHOLE_ARCHIVE) libccolamd.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libccolamd.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lsuitesparseconfig $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libccolamd.$(SHLIB_EXT) $(build_shlibdir)/libccolamd.$(SHLIB_EXT) && \
$(CXX) -shared $(WHOLE_ARCHIVE) libcholmod.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libcholmod.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lcolamd -lamd -lcamd -lccolamd -lsuitesparseconfig $(LIBBLAS) $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libcholmod.$(SHLIB_EXT) $(build_shlibdir)/libcholmod.$(SHLIB_EXT) && \
$(CXX) -shared $(WHOLE_ARCHIVE) libumfpack.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libumfpack.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lcholmod -lcolamd -lamd -lsuitesparseconfig $(LIBBLAS) $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libumfpack.$(SHLIB_EXT) $(build_shlibdir)/libumfpack.$(SHLIB_EXT) && \
$(CXX) -shared $(WHOLE_ARCHIVE) libspqr.a $(NO_WHOLE_ARCHIVE) -o $(build_shlibdir)/libspqr.$(SHLIB_EXT) $(LDFLAGS) -L$(build_shlibdir) -lcholmod -lcolamd -lamd -lsuitesparseconfig $(LIBLAPACK) $(LIBBLAS) $(RPATH_ORIGIN) && \
$(INSTALL_NAME_CMD)libspqr.$(SHLIB_EXT) $(build_shlibdir)/libspqr.$(SHLIB_EXT)
clean-suitesparse:
-$(MAKE) -C SuiteSparse-$(SUITESPARSE_VER) clean
-rm -fr SuiteSparse-$(SUITESPARSE_VER)/lib
distclean-suitesparse:
-rm -rf SuiteSparse-$(SUITESPARSE_VER).tar.gz SuiteSparse-$(SUITESPARSE_VER)
get-suitesparse: SuiteSparse-$(SUITESPARSE_VER).tar.gz
configure-suitesparse: get-suitesparse
compile-suitesparse: $(SUITESPARSE_OBJ_SOURCE)
check-suitesparse: SuiteSparse-$(SUITESPARSE_VER)/checked
install-suitesparse: $(SUITESPARSE_OBJ_TARGET) install-suitesparse-wrapper
# SUITESPARSE WRAPPER
ifeq ($(USE_SYSTEM_SUITESPARSE), 1)
SUITESPARSE_INC = -I /usr/include/suitesparse
SUITESPARSE_LIB = -lumfpack -lcholmod -lamd -lcamd -lcolamd -lspqr
else
SUITESPARSE_INC = -I SuiteSparse-$(SUITESPARSE_VER)/CHOLMOD/Include -I SuiteSparse-$(SUITESPARSE_VER)/SuiteSparse_config -I SuiteSparse-$(SUITESPARSE_VER)/SPQR/Include
SUITESPARSE_LIB = -L$(build_shlibdir) -lcholmod -lumfpack -lspqr $(RPATH_ORIGIN)
$(build_shlibdir)/libsuitesparse_wrapper.$(SHLIB_EXT): $(SUITESPARSE_OBJ_TARGET)
endif
$(build_shlibdir)/libsuitesparse_wrapper.$(SHLIB_EXT): SuiteSparse_wrapper.c
$(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -O2 -shared $(fPIC) $(SUITESPARSE_INC) $< -o $@ $(SUITESPARSE_LIB)
$(INSTALL_NAME_CMD)libsuitesparse_wrapper.$(SHLIB_EXT) $@
touch -c $@
clean-suitesparse-wrapper:
-rm -f $(SUITESPARSE_OBJ_TARGET) $(build_shlibdir)/libsuitesparse_wrapper.$(SHLIB_EXT)
distclean-suitesparse-wrapper: clean-suitesparse-wrapper
get-suitesparse-wrapper:
configure-suitesparse-wrapper:
compile-suitesparse-wrapper:
check-suitesparse-wrapper:
install-suitesparse-wrapper: $(build_shlibdir)/libsuitesparse_wrapper.$(SHLIB_EXT)
## UNWIND ##
LIBUNWIND_TARGET_OBJ = $(build_libdir)/libunwind.a
LIBUNWIND_TARGET_SOURCE = libunwind-$(UNWIND_VER)/src/.libs/libunwind.a
LIBUNWIND_CFLAGS = -U_FORTIFY_SOURCE $(fPIC)
LIBUNWIND_CPPFLAGS =
libunwind-$(UNWIND_VER).tar.gz:
$(JLDOWNLOAD) $@ http://download.savannah.gnu.org/releases/libunwind/$@
libunwind-$(UNWIND_VER)/configure: libunwind-$(UNWIND_VER).tar.gz
$(JLCHECKSUM) $<
$(TAR) xfz $<
cd libunwind-$(UNWIND_VER) && patch -p1 < ../libunwind.patch
touch -c $@
libunwind-$(UNWIND_VER)/config.status: libunwind-$(UNWIND_VER)/configure
cd libunwind-$(UNWIND_VER) && \
./configure $(CONFIGURE_COMMON) CPPFLAGS="$(CPPFLAGS) $(LIBUNWIND_CPPFLAGS)" CFLAGS="$(CFLAGS) $(LIBUNWIND_CFLAGS)" --disable-shared --disable-minidebuginfo
touch -c $@
$(LIBUNWIND_TARGET_SOURCE): libunwind-$(UNWIND_VER)/config.status
$(MAKE) -C libunwind-$(UNWIND_VER)
touch -c $@
libunwind-$(UNWIND_VER)/checked: $(LIBUNWIND_TARGET_SOURCE)
ifeq ($(OS),$(BUILD_OS))
$(MAKE) -C libunwind-$(UNWIND_VER) check
endif
echo 1 > $@
#todo: libunwind tests known to fail
$(LIBUNWIND_TARGET_OBJ): $(LIBUNWIND_TARGET_SOURCE)
$(call make-install,libunwind-$(UNWIND_VER),)
ifeq ($(ARCH), ppc64)
# workaround for configure script bug
mv $(build_prefix)/lib64/libunwind*.a $(build_libdir)
endif
touch $@
clean-unwind:
-$(MAKE) -C libunwind-$(UNWIND_VER) clean
-rm -f $(LIBUNWIND_TARGET_OBJ) $(LIBUNWIND_TARGET_SOURCE)
distclean-unwind:
-rm -rf libunwind-$(UNWIND_VER).tar.gz libunwind-$(UNWIND_VER)
get-unwind: libunwind-$(UNWIND_VER).tar.gz
configure-unwind: libunwind-$(UNWIND_VER)/config.status
compile-unwind: $(LIBUNWIND_TARGET_SOURCE)
check-unwind: libunwind-$(UNWIND_VER)/checked
install-unwind: $(LIBUNWIND_TARGET_OBJ)
## OS X Unwind ##
OSXUNWIND_FLAGS = ARCH="$(ARCH)" CC="$(CC)" FC="$(FC)" AR="$(AR)" OS="$(OS)" USECLANG=$(USECLANG) USEGCC=$(USEGCC) CFLAGS="$(CFLAGS) -ggdb3 -O0" CXXFLAGS="$(CXXFLAGS) -ggdb3 -O0" SFLAGS="-ggdb3" LDFLAGS="$(LDFLAGS) -Wl,-macosx_version_min,10.7"
OSXUNWIND_OBJ_TARGET = $(build_shlibdir)/libosxunwind.$(SHLIB_EXT)
OSXUNWIND_OBJ_SOURCE = libosxunwind-$(OSXUNWIND_VER)/libosxunwind.$(SHLIB_EXT)
libosxunwind-$(OSXUNWIND_VER).tar.gz:
$(JLDOWNLOAD) $@ https://github.com/JuliaLang/libosxunwind/archive/v$(OSXUNWIND_VER).tar.gz
libosxunwind-$(OSXUNWIND_VER)/Makefile: libosxunwind-$(OSXUNWIND_VER).tar.gz
$(JLCHECKSUM) $<
$(TAR) xfz $<
touch -c $@
$(OSXUNWIND_OBJ_SOURCE): libosxunwind-$(OSXUNWIND_VER)/Makefile
$(MAKE) -C libosxunwind-$(OSXUNWIND_VER) $(OSXUNWIND_FLAGS)
touch -c $@
$(OSXUNWIND_OBJ_TARGET): $(OSXUNWIND_OBJ_SOURCE) | $(build_shlibdir)
cp libosxunwind-$(OSXUNWIND_VER)/libosxunwind.a $(build_libdir)/libosxunwind.a
cp $< $@
cp -R libosxunwind-$(OSXUNWIND_VER)/include/* $(build_includedir)
$(INSTALL_NAME_CMD)libosxunwind.$(SHLIB_EXT) $@
clean-osxunwind:
-$(MAKE) -C libosxunwind-$(OSXUNWIND_VER) distclean $(OSXUNWIND_FLAGS)
-rm $(OSXUNWIND_OBJ_TARGET)
distclean-osxunwind:
-rm -rf libosxunwind-$(OSXUNWIND_VER)
get-osxunwind: libosxunwind-$(OSXUNWIND_VER)/Makefile
configure-osxunwind: get-osxunwind
compile-osxunwind: $(OSXUNWIND_OBJ_SOURCE)
check-osxunwind: compile-osxunwind
install-osxunwind: $(OSXUNWIND_OBJ_TARGET)
## GMP ##
GMP_SRC_TARGET = gmp-$(GMP_VER)/.libs/libgmp.$(SHLIB_EXT)
GMP_OBJ_TARGET = $(build_shlibdir)/libgmp.$(SHLIB_EXT)
ifeq ($(SANITIZE),1)
GMP_CONFIGURE_OPTS += --disable-assembly
endif
gmp-$(GMP_VER).tar.bz2:
$(JLDOWNLOAD) $@ https://gmplib.org/download/gmp/$@
gmp-$(GMP_VER)/configure: gmp-$(GMP_VER).tar.bz2
$(JLCHECKSUM) $<
$(TAR) jxf $<
ifeq ($(OS), Darwin)
cd gmp-$(GMP_VER) && patch -p1 < ../gmp_6.0.0_osx.patch
endif
touch -c $@
gmp-$(GMP_VER)/config.status: gmp-$(GMP_VER)/configure
cd gmp-$(GMP_VER) && \
./configure $(CONFIGURE_COMMON) F77= --enable-shared --disable-static $(GMP_CONFIGURE_OPTS)
touch -c $@
$(GMP_SRC_TARGET): gmp-$(GMP_VER)/config.status
$(MAKE) -C gmp-$(GMP_VER) $(LIBTOOL_CCLD)
gmp-$(GMP_VER)/checked: $(GMP_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
$(MAKE) -C gmp-$(GMP_VER) $(LIBTOOL_CCLD) check
endif
echo 1 > $@
$(GMP_OBJ_TARGET): $(GMP_SRC_TARGET) gmp-$(GMP_VER)/checked | $(build_shlibdir) $(build_includedir)
$(INSTALL_M) gmp-$(GMP_VER)/.libs/libgmp.*$(SHLIB_EXT)* $(build_shlibdir)
$(INSTALL_F) gmp-$(GMP_VER)/gmp.h $(build_includedir)
$(INSTALL_NAME_CMD)libgmp.$(SHLIB_EXT) $@
touch -c $@
clean-gmp:
-$(MAKE) -C gmp-$(GMP_VER) clean
-rm -f $(GMP_OBJ_TARGET)
distclean-gmp:
-rm -rf gmp-$(GMP_VER).tar.bz2 gmp-$(GMP_VER)
get-gmp: gmp-$(GMP_VER).tar.bz2
configure-gmp: gmp-$(GMP_VER)/config.status
compile-gmp: $(GMP_SRC_TARGET)
check-gmp: gmp-$(GMP_VER)/checked
install-gmp: $(GMP_OBJ_TARGET)
ifeq ($(USE_SYSTEM_GMP), 0)
MPFR_DEPS = $(GMP_OBJ_TARGET)
endif
## MPFR ##
ifeq ($(USE_SYSTEM_MPFR), 0)
ifeq ($(USE_SYSTEM_GMP), 0)
MPFR_OPTS = --with-gmp-include=$(abspath $(build_includedir)) --with-gmp-lib=$(abspath $(build_shlibdir))
endif
endif
ifeq ($(BUILD_OS),WINNT)
ifeq ($(OS),WINNT)
MPFR_OPTS += --disable-thread-safe CFLAGS="$(CFLAGS) -DNPRINTF_L -DNPRINTF_T -DNPRINTF_J"
endif
endif
MPFR_SRC_TARGET = mpfr-$(MPFR_VER)/src/.libs/libmpfr.$(SHLIB_EXT)
MPFR_OBJ_TARGET = $(build_shlibdir)/libmpfr.$(SHLIB_EXT)
ifeq ($(OS),Darwin)
MPFR_CHECK_MFLAGS = LDFLAGS="$(LDFLAGS) -Wl,-rpath,'$(build_libdir)'"
endif
ifeq ($(SANITIZE),1)
# Force generic C build
MPFR_OPTS += --host=none-unknown-linux
endif
mpfr-$(MPFR_VER).tar.bz2:
$(JLDOWNLOAD) $@ http://www.mpfr.org/mpfr-$(MPFR_VER)/$@
mpfr-$(MPFR_VER)/configure: mpfr-$(MPFR_VER).tar.bz2
$(JLCHECKSUM) $<
$(TAR) jxf $<
touch -c $@
mpfr-$(MPFR_VER)/config.status: mpfr-$(MPFR_VER)/configure | $(MPFR_DEPS)
cd mpfr-$(MPFR_VER) && \
./configure $(CONFIGURE_COMMON) $(MPFR_OPTS) F77= --enable-shared --disable-static
touch -c $@
$(MPFR_SRC_TARGET): mpfr-$(MPFR_VER)/config.status
$(MAKE) -C mpfr-$(MPFR_VER) $(LIBTOOL_CCLD)
mpfr-$(MPFR_VER)/checked: $(MPFR_SRC_TARGET)
ifeq ($(OS),$(BUILD_OS))
$(MAKE) -C mpfr-$(MPFR_VER) $(LIBTOOL_CCLD) check $(MPFR_CHECK_MFLAGS)
endif
echo 1 > $@
$(MPFR_OBJ_TARGET): $(MPFR_SRC_TARGET) mpfr-$(MPFR_VER)/checked
$(call make-install,mpfr-$(MPFR_VER),$(LIBTOOL_CCLD))
$(INSTALL_NAME_CMD)libmpfr.$(SHLIB_EXT) $@
touch -c $@
clean-mpfr:
-$(MAKE) -C mpfr-$(MPFR_VER) clean
-rm -f $(MPFR_OBJ_TARGET)
distclean-mpfr:
-rm -rf mpfr-$(MPFR_VER).tar.bz2 mpfr-$(MPFR_VER)
get-mpfr: mpfr-$(MPFR_VER).tar.bz2
configure-mpfr: mpfr-$(MPFR_VER)/config.status
compile-mpfr: $(MPFR_SRC_TARGET)
check-mpfr: mpfr-$(MPFR_VER)/checked
install-mpfr: $(MPFR_OBJ_TARGET)
## patchelf ##
PATCHELF_SOURCE = patchelf-$(PATCHELF_VER)/src/patchelf
PATCHELF_TARGET = $(build_bindir)/patchelf
compile-patchelf: install-patchelf
install-patchelf: $(PATCHELF_TARGET)
patchelf-$(PATCHELF_VER).tar.gz:
$(JLDOWNLOAD) $@ http://nixos.org/releases/patchelf/patchelf-$(PATCHELF_VER)/patchelf-$(PATCHELF_VER).tar.gz
patchelf-$(PATCHELF_VER)/configure: patchelf-$(PATCHELF_VER).tar.gz
$(JLCHECKSUM) $<
$(TAR) zxf $<
touch -c $@
patchelf-$(PATCHELF_VER)/config.status: patchelf-$(PATCHELF_VER)/configure
cd patchelf-$(PATCHELF_VER) && \
./configure $(CONFIGURE_COMMON)
touch -c $@
$(PATCHELF_SOURCE): patchelf-$(PATCHELF_VER)/config.status
$(MAKE) -C patchelf-$(PATCHELF_VER)
touch -c $@
patchelf-$(PATCHELF_VER)/checked: $(PATCHELF_SOURCE)
ifeq ($(OS),$(BUILD_OS))
# disabled due to bug in v0.6
#$(MAKE) -C patchelf-$(PATCHELF_VER) check
endif
echo 1 > $@
$(PATCHELF_TARGET): $(PATCHELF_SOURCE) patchelf-$(PATCHELF_VER)/checked
$(call make-install,patchelf-$(PATCHELF_VER),)
touch -c $@
clean-patchelf:
-$(MAKE) -C patchelf-$(PATCHELF_VER) clean
-rm -f $(PATCHELF_OBJ_TARGET)
distclean-patchelf:
-rm -rf patchelf-$(PATCHELF_VER).tar.gz patchelf-$(PATCHELF_VER)
get-patchelf: patchelf-$(PATCHELF_VER).tar.gz
configure-patchelf: patchelf-$(PATCHELF_VER)/config.status
compile-patchelf: $(PATCHELF_SOURCE)
check-patchelf: patchelf-$(PATCHELF_VER)/checked
install-patchelf: $(PATCHELF_TARGET)
## Git
# only used for the mac binaries in contrib/mac/app/Makefile
GIT_SOURCE = git-$(GIT_VER)/git
GIT_TARGET = $(build_libexecdir)/git
git-$(GIT_VER).tar.gz:
$(JLDOWNLOAD) $@ https://www.kernel.org/pub/software/scm/git/git-$(GIT_VER).tar.gz
git-$(GIT_VER)/configure: git-$(GIT_VER).tar.gz
$(JLCHECKSUM) $<
$(TAR) zxf $<
touch -c $@
git-$(GIT_VER)/config.status: git-$(GIT_VER)/configure
cd git-$(GIT_VER) && \
./configure $(CONFIGURE_COMMON) --bindir="$(build_libexecdir)"
touch -c $@
$(GIT_SOURCE): git-$(GIT_VER)/config.status
$(MAKE) -C git-$(GIT_VER)
touch -c $@
git-$(GIT_VER)/checked: $(GIT_SOURCE)
echo 1 > $@
$(GIT_TARGET): $(GIT_SOURCE) git-$(GIT_VER)/checked
$(call make-install,git-$(GIT_VER),NO_INSTALL_HARDLINKS=1 bindir="$(build_libexecdir)")
touch -c $@
clean-git:
-$(MAKE) -C git-$(GIT_VER) clean
-rm -f $(GIT_OBJ_TARGET)
distclean-git:
-rm -rf git-$(GIT_VER).tar.gz git-$(GIT_VER)
get-git: git-$(GIT_VER).tar.gz
configure-git: git-$(GIT_VER)/config.status
compile-git: $(GIT_SOURCE)
check-git: git-$(GIT_VER)/checked
install-git: $(GIT_TARGET)
## virtualenv
VIRTUALENV_SOURCE = virtualenv-$(VIRTUALENV_VER)/virtualenv.py
VIRTUALENV_TARGET = julia-env
virtualenv-$(VIRTUALENV_VER).tar.gz:
$(JLDOWNLOAD) $@ https://pypi.python.org/packages/source/v/virtualenv/$@
$(VIRTUALENV_SOURCE): virtualenv-$(VIRTUALENV_VER).tar.gz
$(JLCHECKSUM) $<
$(TAR) zxf $<
touch -c $@
$(VIRTUALENV_TARGET): $(VIRTUALENV_SOURCE)
"$(shell ./find_python2)" $< $@
ifeq ($(BUILD_OS), WINNT)
-[ -e $@/Scripts ] && ! [ -e $@/bin ] && cmd //C mklink //J $@\\bin $@\\Scripts
endif
touch -c $@
clean-virtualenv:
-$(MAKE) -C virtualenv-$(VIRTUALENV_VER) clean
-rm -rf $(VIRTUALENV_TARGET)
distclean-virtualenv: clean-virtualenv
-rm -rf virtualenv-$(VIRTUALENV_VER).tar.gz virtualenv-$(VIRTUALENV_VER)
get-virtualenv: virtualenv-$(VIRTUALENV_VER).tar.gz
configure-virtualenv: get-virtualenv
compile-virtualenv: $(VIRTUALENV_SOURCE)
check-virtualenv: compile-virtualenv
install-virtualenv: $(VIRTUALENV_TARGET)
## libgit2
LIBGIT2_GIT_URL = git://github.com/libgit2/libgit2.git
LIBGIT2_TAR_URL = https://api.github.com/repos/libgit2/libgit2/tarball/$1
$(eval $(call git-external,libgit2,LIBGIT2,CMakeLists.txt,build/libgit2.$(SHLIB_EXT)))
LIBGIT2_OBJ_SOURCE = $(LIBGIT2_SRC_DIR)/build/libgit2.$(SHLIB_EXT)
LIBGIT2_OBJ_TARGET = $(build_shlibdir)/libgit2.$(SHLIB_EXT)
LIBGIT2_OPTS = $(CMAKE_COMMON) -DTHREADSAFE=ON
ifeq ($(OS),WINNT)
LIBGIT2_OPTS += -DWIN32=ON -DMINGW=ON -DUSE_SSH=OFF -DCMAKE_SYSTEM_NAME=Windows
ifneq ($(ARCH),x86_64)
LIBGIT2_OPTS += -DCMAKE_C_FLAGS="-mincoming-stack-boundary=2"
endif
ifeq ($(BUILD_OS),WINNT)
LIBGIT2_OPTS += -G"MSYS Makefiles"
else
LIBGIT2_OPTS += -DBUILD_CLAR=OFF -DCMAKE_RC_COMPILER=`which $(CROSS_COMPILE)windres` -DDLLTOOL=`which $(CROSS_COMPILE)dlltool`
LIBGIT2_OPTS += -DCMAKE_FIND_ROOT_PATH=/usr/$(XC_HOST) -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY
endif
endif
$(LIBGIT2_SRC_DIR)/build/Makefile: $(LIBGIT2_SRC_DIR)/CMakeLists.txt
mkdir -p $(LIBGIT2_SRC_DIR)/build
cd $(LIBGIT2_SRC_DIR)/build/ && \
$(CMAKE) .. $(LIBGIT2_OPTS)
touch -c $@
$(LIBGIT2_OBJ_SOURCE): $(LIBGIT2_SRC_DIR)/build/Makefile
$(MAKE) -C $(LIBGIT2_SRC_DIR)/build
touch -c $@
$(LIBGIT2_SRC_DIR)/build/checked: $(LIBGIT2_OBJ_SOURCE)
ifeq ($(OS),$(BUILD_OS))
$(MAKE) -C $(LIBGIT2_SRC_DIR)/build test
endif
echo 1 > $@
$(LIBGIT2_OBJ_TARGET): $(LIBGIT2_OBJ_SOURCE) | $(build_shlibdir)
cp $< $@
#$$(call make-install,$(LIBGIT2_SRC_DIR)/build,)
ifeq ($(OS),Linux)
# If we're on linux, copy over libssl and libcrypto for libgit2
-LIBGIT_LIBS=$$(ldd "$@" | tail -n +2 | awk '{print $$(NF-1)}'); \
for LIB in libssl libcrypto; do \
LIB_PATH=$$(echo "$$LIBGIT_LIBS" | grep "$$LIB"); \
echo "LIB_PATH for $$LIB: $$LIB_PATH"; \
[ ! -z "$$LIB_PATH" ] && cp -v "$$LIB_PATH" $(build_shlibdir); \
done
endif
touch -c $@
clean-libgit2:
-rm -rf $(LIBGIT2_SRC_DIR)/build/
-rm -f $(LIBGIT2_OBJ_TARGET)
get-libgit2: $(LIBGIT2_SRC_DIR)/CMakeLists.txt
configure-libgit2: $(LIBGIT2_SRC_DIR)/build/Makefile
compile-libgit2: $(LIBGIT2_OBJ_SOURCE)
check-libgit2: $(LIBGIT2_SRC_DIR)/build/checked
install-libgit2: $(LIBGIT2_OBJ_TARGET)
## phony targets ##
.PHONY: default compile install cleanall distcleanall \
get-* configure-* compile-* check-* install-* \
clean-* distclean-* reinstall-* update-llvm
Computing file changes ...
