| abe94c7 | Linus Torvalds | 29 January 2010, 21:57:50 UTC | Linux 2.6.33-rc6 | 29 January 2010, 21:57:50 UTC |
| 4995c0b | Dmitry Artamonow | 23 January 2010, 21:20:20 UTC | mfd: Fix asic3 build asic3 also needs tmio_core or otherwise will fail to build. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 29 January 2010, 20:03:09 UTC |
| 499a267 | Linus Torvalds | 29 January 2010, 19:15:32 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib | 29 January 2010, 19:15:32 UTC |
| a701623 | Hugh Dickins | 29 January 2010, 17:46:34 UTC | mm: fix migratetype bug which slowed swapping After memory pressure has forced it to dip into the reserves, 2.6.32's 5f8dcc21211a3d4e3a7a5ca366b469fb88117f61 "page-allocator: split per-cpu list into one-list-per-migrate-type" has been returning MIGRATE_RESERVE pages to the MIGRATE_MOVABLE free_list: in some sense depleting reserves. Fix that in the most straightforward way (which, considering the overheads of alternative approaches, is Mel's preference): the right migratetype is already in page_private(page), but free_pcppages_bulk() wasn't using it. How did this bug show up? As a 20% slowdown in my tmpfs loop kbuild swapping tests, on PowerMac G5 with SLUB allocator. Bisecting to that commit was easy, but explaining the magnitude of the slowdown not easy. The same effect appears, but much less markedly, with SLAB, and even less markedly on other machines (the PowerMac divides into fewer zones than x86, I think that may be a factor). We guess that lumpy reclaim of short-lived high-order pages is implicated in some way, and probably this bug has been tickling a poor decision somewhere in page reclaim. But instrumentation hasn't told me much, I've run out of time and imagination to determine exactly what's going on, and shouldn't hold up the fix any longer: it's valid, and might even fix other misbehaviours. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 18:28:09 UTC |
| 67f15b0 | Linus Torvalds | 29 January 2010, 18:27:37 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check total number of devices when removing missing Btrfs: check return value of open_bdev_exclusive properly Btrfs: do not mark the chunk as readonly if in degraded mode Btrfs: run orphan cleanup on default fs root Btrfs: fix a memory leak in btrfs_init_acl Btrfs: Use correct values when updating inode i_size on fallocate Btrfs: remove tree_search() in extent_map.c Btrfs: Add mount -o compress-force | 29 January 2010, 18:27:37 UTC |
| 94673e9 | David Miller | 29 January 2010, 05:42:02 UTC | sparc: TIF_ABI_PENDING bit removal Here are the sparc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 16:22:01 UTC |
| 05d43ed | H. Peter Anvin | 29 January 2010, 06:14:43 UTC | x86: get rid of the insane TIF_ABI_PENDING bit Now that the previous commit made it possible to do the personality setting at the point of no return, we do just that for ELF binaries. And suddenly all the reasons for that insane TIF_ABI_PENDING bit go away, and we can just make SET_PERSONALITY() just do the obvious thing for a 32-bit compat process. Everything becomes much more straightforward this way. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 16:22:01 UTC |
| 221af7f | Linus Torvalds | 29 January 2010, 06:14:42 UTC | Split 'flush_old_exec' into two functions 'flush_old_exec()' is the point of no return when doing an execve(), and it is pretty badly misnamed. It doesn't just flush the old executable environment, it also starts up the new one. Which is very inconvenient for things like setting up the new personality, because we want the new personality to affect the starting of the new environment, but at the same time we do _not_ want the new personality to take effect if flushing the old one fails. As a result, the x86-64 '32-bit' personality is actually done using this insane "I'm going to change the ABI, but I haven't done it yet" bit (TIF_ABI_PENDING), with SET_PERSONALITY() not actually setting the personality, but just the "pending" bit, so that "flush_thread()" can do the actual personality magic. This patch in no way changes any of that insanity, but it does split the 'flush_old_exec()' function up into a preparatory part that can fail (still called flush_old_exec()), and a new part that will actually set up the new exec environment (setup_new_exec()). All callers are changed to trivially comply with the new world order. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 January 2010, 16:22:01 UTC |
| f6bdc23 | Henrik Rydberg | 29 January 2010, 06:28:28 UTC | Input: update multi-touch protocol documentation This patch documents a new ABS_MT parameter and adds further text to clarify some points around the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 29 January 2010, 06:32:52 UTC |
| cb6ecf6 | Henrik Rydberg | 29 January 2010, 06:28:27 UTC | Input: add the ABS_MT_PRESSURE event For pressure-based multi-touch devices, a direct way to send sensor intensity data per finger is needed. This patch adds the ABS_MT_PRESSURE event to the MT protocol. Requested-by: Yoonyoung Shim <jy0922.shim@samsung.com> Requested-by: Mika Kuoppala <mika.kuoppala@nokia.com> Requested-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 29 January 2010, 06:32:45 UTC |
| 93fb84b | David Härdeman | 29 January 2010, 06:28:27 UTC | Input: winbond-cir - remove dmesg spam I missed converting one dev_info call to deb_dbg before submitting the driver. Without this change, a message will be printed to dmesg for each button press if a RC6 remote is used. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: stable <stable@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 29 January 2010, 06:32:38 UTC |
| 64a028a | Linus Torvalds | 29 January 2010, 02:48:53 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Fix failure exit in ipathfs fix oops in fs/9p late mount failure fix leak in romfs_fill_super() get rid of pointless checks after simple_pin_fs() Fix failure exits in bfs_fill_super() fix affs parse_options() Fix remount races with symlink handling in affs Fix a leak in affs_fill_super() | 29 January 2010, 02:48:53 UTC |
| 3d29935 | Linus Torvalds | 29 January 2010, 00:33:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: remove IOH range fetching PCI: fix nested spinlock hang in aer_inject | 29 January 2010, 00:33:12 UTC |
| 474118d | Linus Torvalds | 28 January 2010, 22:34:11 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Update mach-types [ARM] orion5x: D-link DNS-323 rev. B1 power-off [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2 [ARM] pxa: fix irq suspend/resume for pxa25x [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus [ARM] Kirkwood: drive USB VBUS pin on rd88f6192-nas high on boot [ARM] Orion: fix PCIe inbound window programming when RAM size is not a power of two | 28 January 2010, 22:34:11 UTC |
| ba45d52 | Russell King | 28 January 2010, 22:15:55 UTC | [ARM] Update mach-types Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 28 January 2010, 22:17:45 UTC |
| 0b6c135 | Russell King | 28 January 2010, 21:59:58 UTC | Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 | 28 January 2010, 21:59:58 UTC |
| 035fe03 | Josef Bacik | 27 January 2010, 02:09:38 UTC | Btrfs: check total number of devices when removing missing If you have a disk failure in RAID1 and then add a new disk to the array, and then try to remove the missing volume, it will fail. The reason is the sanity check only looks at the total number of rw devices, which is just 2 because we have 2 good disks and 1 bad one. Instead check the total number of devices in the array to make sure we can actually remove the device. Tested this with a failed disk setup and with this test we can now run btrfs-vol -r missing /mount/point and it works fine. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| 7f59203 | Josef Bacik | 27 January 2010, 02:09:00 UTC | Btrfs: check return value of open_bdev_exclusive properly Hit this problem while testing RAID1 failure stuff. open_bdev_exclusive returns ERR_PTR(), not NULL. So change the return value properly. This is important if you accidently specify a device that doesn't exist when trying to add a new device to an array, you will panic the box dereferencing bdev. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| f48b907 | Josef Bacik | 27 January 2010, 02:07:59 UTC | Btrfs: do not mark the chunk as readonly if in degraded mode If a RAID setup has chunks that span multiple disks, and one of those disks has failed, btrfs_chunk_readonly will return 1 since one of the disks in that chunk's stripes is dead and therefore not writeable. So instead if we are in degraded mode, return 0 so we can go ahead and allocate stuff. Without this patch all of the block groups in a RAID1 setup will end up read-only, which will mean we can't add new disks to the array since we won't be able to make allocations. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| e3acc2a | Josef Bacik | 26 January 2010, 14:30:53 UTC | Btrfs: run orphan cleanup on default fs root This patch revert's commit 6c090a11e1c403b727a6a8eff0b97d5fb9e95cb5 Since it introduces this problem where we can run orphan cleanup on a volume that can have orphan entries re-added. Instead of my original fix, Yan Zheng pointed out that we can just revert my original fix and then run the orphan cleanup in open_ctree after we look up the fs_root. I have tested this with all the tests that gave me problems and this patch fixes both problems. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| f858153 | Yang Hongyang | 26 January 2010, 00:48:23 UTC | Btrfs: fix a memory leak in btrfs_init_acl In btrfs_init_acl() cloned acl is not released Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:39 UTC |
| d1ea6a6 | Aneesh Kumar K.V | 20 January 2010, 07:28:54 UTC | Btrfs: Use correct values when updating inode i_size on fallocate commit f2bc9dd07e3424c4ec5f3949961fe053d47bc825 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Date: Wed Jan 20 12:57:53 2010 +0530 Btrfs: Use correct values when updating inode i_size on fallocate Even though we allocate more, we should be updating inode i_size as per the arguments passed Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:38 UTC |
| b8d9bfe | Miao Xie | 15 December 2009, 06:54:17 UTC | Btrfs: remove tree_search() in extent_map.c This patch removes tree_search() in extent_map.c because it is not called by anything. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:20:38 UTC |
| a555f81 | Chris Mason | 28 January 2010, 21:18:15 UTC | Btrfs: Add mount -o compress-force The default btrfs mount -o compress mode will quickly back off compressing a file if it notices that compression does not reduce the size of the data being written. This can save considerable CPU because all future writes to the file go through uncompressed. But some files are both very large and have mixed data stored in them. In that case, we want to add the ability to always try compressing data before writing it. This commit adds mount -o compress-force. A later commit will add a new inode flag that does the same thing. Signed-off-by: Chris Mason <chris.mason@oracle.com> | 28 January 2010, 21:18:15 UTC |
| d4d37bd | Linus Torvalds | 28 January 2010, 20:59:43 UTC | Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs MIPS: PowerTV: Streamline access to platform device registers MIPS: Fix vmlinuz build for 32bit-only math shells MIPS: Add support of LZO-compressed kernels | 28 January 2010, 20:59:43 UTC |
| 551e28d | Linus Torvalds | 28 January 2010, 20:57:50 UTC | Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6 * 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: fix volume creation input checking | 28 January 2010, 20:57:50 UTC |
| b39bda6 | Linus Torvalds | 28 January 2010, 20:56:23 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix crashes with TSB43AB23 on 64bit systems firewire: core: fix use-after-free regression in FCP handler firewire: cdev: add_descriptor documentation fix firewire: core: add_descriptor size check | 28 January 2010, 20:56:23 UTC |
| e8e06ea | Jeff Garrett | 28 January 2010, 04:02:26 UTC | x86/PCI: remove IOH range fetching Turned out to cause trouble on single IOH machines, and is superceded by _CRS on multi-IOH machines with production BIOSes. Signed-off-by: Jeff Garrett <jeff@jgarrett.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> | 28 January 2010, 16:24:11 UTC |
| 57b5e2a | Jon Dodgson | 28 January 2010, 08:07:45 UTC | Input: lifebook - add another Lifebook DMI signature There are many many ways one can capitalize "Lifebook B Series"... Signed-off-by: Jon Dodgson <crayzeejon@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 28 January 2010, 08:29:03 UTC |
| 010c108 | David VomLehn | 22 December 2009, 01:49:22 UTC | MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:31 UTC |
| 59dfa2f | David VomLehn | 24 December 2009, 01:34:46 UTC | MIPS: PowerTV: Streamline access to platform device registers Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:31 UTC |
| 9c4a6fc | Alexander Clouter | 20 January 2010, 20:50:07 UTC | MIPS: Fix vmlinuz build for 32bit-only math shells POSIX requires $((<expression>)) arithmetic in sh only to have long arithmetic so on 32-bit sh binaries might do only 32-bit arithmetic but the arithmetic done in arch/mips/boot/compressed/Makefile needs 64-bit. I play with the AR7 platform, so VMLINUX_LOAD_ADDRESS is 0xffffffff94100000, and for an example 4MiB kernel VMLINUZ_LOAD_ADDRESS is made out to be: ---- alex@berk:~$ bash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' ffffffff94500000 alex@berk:~$ dash -c 'printf "%x\n" $((0xffffffff94100000 + 0x400000))' 80000000003fffff ---- The former is obviously correct whilst the later breaks things royally. Fortunately working with only the lower 32bit's works for both bash and dash: ---- $ bash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 $ dash -c 'printf "%x\n" $((0x94100000 + 0x400000))' 94500000 ---- So, we can split the original 64bit string to two parts, and only calculate the low 32bit part, which is big enough (1GiB kernel sizes anyone?) for a normal Linux kernel image file, now, we calculate the VMLINUZ_LOAD_ADDRESS like this: 1. if present, append top 32bit of VMLINUX_LOAD_ADDRESS" as a prefix 2. get the sum of the low 32bit of VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE This patch fixes vmlinuz kernel builds on systems where only a 32bit-only math shell is available. Patch Changelog: Version 2 - simplified method by using 'expr' for 'substr' and making it work with dash once again Version 1 - Revert the removals of '-n "$(VMLINUX_SIZE)"' to avoid the error of "make clean" - Consider more cases of the VMLINUX_LOAD_ADDRESS Version 0 - initial release Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/861/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:30 UTC |
| fe1d45e | Wu Zhangjin | 15 January 2010, 12:34:46 UTC | MIPS: Add support of LZO-compressed kernels The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Patchwork: http://patchwork.linux-mips.org/patch/857/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 27 January 2010, 23:03:30 UTC |
| 00e4acb | Russell King | 27 January 2010, 22:16:05 UTC | Merge branch 'for-rmk' of git://git.marvell.com/orion | 27 January 2010, 22:16:05 UTC |
| be8cde8 | Linus Torvalds | 27 January 2010, 17:54:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions | 27 January 2010, 17:54:08 UTC |
| 981a2ed | Linus Torvalds | 27 January 2010, 17:27:44 UTC | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6 * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix single stepped svcs with TRACE_IRQFLAGS=y [S390] zcrypt: Do not remove coprocessor for error 8/72 [S390] sclp_vt220: set initial terminal window size [S390] use set_current_state in sigsuspend [S390] irqflags: add missing types.h include [S390] dasd: fix possible NULL pointer errors | 27 January 2010, 17:27:44 UTC |
| 4bdadb9 | Chris Wilson | 27 January 2010, 13:36:32 UTC | drm/i915: Selectively enable self-reclaim Having missed the ENOMEM return via i915_gem_fault(), there are probably other paths that I also missed. By not enabling NORETRY by default these paths can run the shrinker and take memory from the system (but not from our own inactive lists because our shrinker can not run whilst we hold the struct mutex) and this may allow the system to survive a little longer whilst our drivers consume all available memory. References: OOM killer unexpectedly called with kernel 2.6.32 http://bugzilla.kernel.org/show_bug.cgi?id=14933 v2: Pass gfp into page mapping. v3: Use new read_cache_page_gfp() instead of open-coding. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 January 2010, 17:26:43 UTC |
| 7a48143 | Stefan Richter | 26 January 2010, 20:39:07 UTC | firewire: ohci: fix crashes with TSB43AB23 on 64bit systems Unsurprisingly, Texas Instruments TSB43AB23 exhibits the same behaviour as TSB43AB22/A in dual buffer IR DMA mode: If descriptors are located at physical addresses above the 31 bit address range (2 GB), the controller will overwrite random memory. With luck, this merely prevents video reception. With only a little less luck, the machine crashes. We use the same workaround here as with TSB43AB22/A: Switch off the dual buffer capability flag and use packet-per-buffer IR DMA instead. Another possible workaround would be to limit the coherent DMA mask to 31 bits. In Linux 2.6.33, this change serves effectively only as documentation since dual buffer mode is not used for any controller anymore. But somebody might want to re-enable it in the future to make use of features of dual buffer DMA that are not available in packet-per-buffer mode. In Linux 2.6.32 and older, this update is vital for anyone with this controller, more than 2 GB RAM, a 64 bit kernel, and FireWire video or audio applications. We have at least four reports: http://bugzilla.kernel.org/show_bug.cgi?id=13808 http://marc.info/?l=linux1394-user&m=126154279004083 https://bugzilla.redhat.com/show_bug.cgi?id=552142 http://marc.info/?l=linux1394-user&m=126432246128386 Reported-by: Paul Johnson Reported-by: Ronneil Camara Reported-by: G Zornetzer Reported-by: Mark Thompson Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 27 January 2010, 17:24:53 UTC |
| 0531b2a | Linus Torvalds | 27 January 2010, 17:20:03 UTC | mm: add new 'read_cache_page_gfp()' helper function It's a simplified 'read_cache_page()' which takes a page allocation flag, so that different paths can control how aggressive the memory allocations are that populate a address space. In particular, the intel GPU object mapping code wants to be able to do a certain amount of own internal memory management by automatically shrinking the address space when memory starts getting tight. This allows it to dynamically use different memory allocation policies on a per-allocation basis, rather than depend on the (static) address space gfp policy. The actual new function is a one-liner, but re-organizing the helper functions to the point where you can do this with a single line of code is what most of the patch is all about. Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 January 2010, 17:20:03 UTC |
| caf0801 | Linus Torvalds | 27 January 2010, 10:49:10 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. x86: Remove "x86 CPU features in debugfs" (CONFIG_X86_CPU_DEBUG) Revert "x86: ucode-amd: Load ucode-patches once ..." x86: Disable HPET MSI on ATI SB700/SB800 x86: Set hotpluggable nodes in nodes_possible_map | 27 January 2010, 10:49:10 UTC |
| 5bc6d79 | Linus Torvalds | 27 January 2010, 10:47:24 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix UP build. | 27 January 2010, 10:47:24 UTC |
| c5ce5b4 | Mika Westerberg | 26 January 2010, 15:47:05 UTC | UBI: fix volume creation input checking Do not use an unchecked variable UBI_IOCMKVOL ioctl. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@vger.kernel.org | 27 January 2010, 09:55:43 UTC |
| 21ec7f6 | Martin Schwidefsky | 27 January 2010, 09:12:40 UTC | [S390] fix single stepped svcs with TRACE_IRQFLAGS=y If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:49 UTC |
| 19b123e | Felix Beck | 27 January 2010, 09:12:39 UTC | [S390] zcrypt: Do not remove coprocessor for error 8/72 In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:49 UTC |
| 0b665d7 | Hendrik Brueckner | 27 January 2010, 09:12:38 UTC | [S390] sclp_vt220: set initial terminal window size When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:49 UTC |
| 0b4d789 | Martin Schwidefsky | 27 January 2010, 09:12:37 UTC | [S390] use set_current_state in sigsuspend Use set_current_state instead of a direct assignment to set the task state of the current process. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:49 UTC |
| 428aecf | Heiko Carstens | 27 January 2010, 09:12:36 UTC | [S390] irqflags: add missing types.h include Add missing types.h include. Otherwise would cause build breakages on hw breakpoint support, because of undefined BITS_PER_LONG. Also fix up the copyright line and remove the superfluous __KERNEL__ ifdef. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:49 UTC |
| 294001a | Stefan Haberland | 27 January 2010, 09:12:35 UTC | [S390] dasd: fix possible NULL pointer errors Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> | 27 January 2010, 09:12:48 UTC |
| da48247 | Russ Anderson | 27 January 2010, 02:37:22 UTC | x86, msr/cpuid: Pass the number of minors when unregistering MSR and CPUID drivers. Pass the number of minors when unregistering MSR and CPUID drivers. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Dean Nelson <dnelson@redhat.com> LKML-Reference: <20100127023722.GA22305@sgi.com> Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> | 27 January 2010, 07:52:38 UTC |
| 12e9a45 | Al Viro | 25 January 2010, 23:44:58 UTC | Fix failure exit in ipathfs deactivate_locked_super() will be done by caller of fill_super, doing it there as well is b0rken. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:27 UTC |
| 083c73c | Al Viro | 25 January 2010, 11:16:19 UTC | fix oops in fs/9p late mount failure if 9P ->get_sb() fails late (at root inode or root dentry allocation), we'll hit its ->kill_sb() with NULL ->s_root Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:27 UTC |
| 7e32b7b | Al Viro | 25 January 2010, 11:05:54 UTC | fix leak in romfs_fill_super() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:26 UTC |
| ef52c75 | Al Viro | 25 January 2010, 09:50:43 UTC | get rid of pointless checks after simple_pin_fs() if we'd just got success from it, vfsmount won't be NULL Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:26 UTC |
| 5998649 | Al Viro | 24 January 2010, 05:52:22 UTC | Fix failure exits in bfs_fill_super() double iput(), leaks... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:25 UTC |
| 217686e | Al Viro | 24 January 2010, 05:06:22 UTC | fix affs parse_options() Error handling in that sucker got broken back in 2003. If function returns 0 on failure, it's not nice to add return -EINVAL into it. Adding return 1 on other failure exits is also not a good thing (and yes, original success exits with 1 and some of failure exits with 0 are still there; so's the original logics in callers). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:25 UTC |
| 2933392 | Al Viro | 24 January 2010, 05:04:07 UTC | Fix remount races with symlink handling in affs A couple of fields in affs_sb_info is used in follow_link() and symlink() for handling AFFS "absolute" symlinks. Need locking against affs_remount() updates. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:24 UTC |
| afc70ed | Al Viro | 24 January 2010, 04:38:27 UTC | Fix a leak in affs_fill_super() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 January 2010, 03:22:24 UTC |
| b04da8b | Greg Kroah-Hartman | 26 January 2010, 23:04:02 UTC | fnctl: f_modown should call write_lock_irqsave/restore Commit 703625118069f9f8960d356676662d3db5a9d116 exposed that f_modown() should call write_lock_irqsave instead of just write_lock_irq so that because a caller could have a spinlock held and it would not be good to renable interrupts. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tavis Ormandy <taviso@google.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 27 January 2010, 01:25:38 UTC |
| 281e203 | Stefan Richter | 24 January 2010, 15:45:03 UTC | firewire: core: fix use-after-free regression in FCP handler Commit db5d247a "firewire: fix use of multiple AV/C devices, allow multiple FCP listeners" introduced a regression into 2.6.33-rc3: The core freed payloads of incoming requests to FCP_Request or FCP_Response before a userspace driver accessed them. We need to copy such payloads for each registered userspace client and free the copies according to the lifetime rules of non-FCP client request resources. (This could possibly be optimized by reference counts instead of copies.) The presently only kernelspace driver which listens for FCP requests, firedtv, was not affected because it already copies FCP frames into an own buffer before returning to firewire-core's FCP handler dispatcher. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 26 January 2010, 19:54:50 UTC |
| 6d3faf6 | Stefan Richter | 24 January 2010, 13:48:00 UTC | firewire: cdev: add_descriptor documentation fix struct fw_cdev_add_descriptor.length is in quadlets, not in bytes. Also remove any doubts about the endianess of descriptor data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 26 January 2010, 19:54:50 UTC |
| e300839 | Stefan Richter | 24 January 2010, 13:47:02 UTC | firewire: core: add_descriptor size check Presently, firewire-core only checks whether descriptors that are to be added by userspace drivers to the local node's config ROM do not exceed a size of 256 quadlets. However, the sum of the bare minimum ROM plus all descriptors (from firewire-core, from firewire-net, from userspace) must not exceed 256 quadlets. Otherwise, the bounds of a statically allocated buffer will be overwritten. If the kernel survives that, firewire-core will subsequently be unable to parse the local node's config ROM. (Note, userspace drivers can add descriptors only through device files of local nodes. These are usually only accessible by root, unlike device files of remote nodes which may be accessible to lesser privileged users.) Therefore add a test which takes the actual present and required ROM size into account for all descriptors of kernelspace and userspace drivers. Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> | 26 January 2010, 19:54:50 UTC |
| 6abce77 | David S. Miller | 26 January 2010, 12:16:49 UTC | sparc64: Fix UP build. Can't reference irq_desc[].affinity when !SMP. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 January 2010, 12:16:49 UTC |
| 9a3cbe3 | Linus Torvalds | 26 January 2010, 03:05:06 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Drop EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE flag ext4: Fix quota accounting error with fallocate ext4: Handle -EDQUOT error on write | 26 January 2010, 03:05:06 UTC |
| 01974ea | Linus Torvalds | 26 January 2010, 03:03:58 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] sbc_fitpc2_wdt: fix I/O space access technique. [WATCHDOG] ixp2000: Fix build failure caused by missing include | 26 January 2010, 03:03:58 UTC |
| 7c1c05a | Linus Torvalds | 26 January 2010, 03:03:45 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: fix a memory-leak in wm8903 ALSA: hda - add possibility to choose speakers configuration for 4930g ALSA: hda - Fix HP T5735 automute ALSA: hda - Turn on EAPD only if available for Realtek codecs ALSA: hda - Fix parsing pin node 0x21 on ALC259 | 26 January 2010, 03:03:45 UTC |
| 486d35e | Linus Torvalds | 26 January 2010, 03:02:31 UTC | Merge branch 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix leak of free lapic date in kvm_arch_vcpu_init() KVM: x86: Fix probable memory leak of vcpu->arch.mce_banks KVM: S390: fix potential array overrun in intercept handling KVM: fix spurious interrupt with irqfd eventfd - allow atomic read and waitqueue remove KVM: MMU: bail out pagewalk on kvm_read_guest error KVM: properly check max PIC pin in irq route setup KVM: only allow one gsi per fd KVM: x86: Fix host_mapping_level() KVM: powerpc: Show timing option only on embedded KVM: Fix race between APIC TMR and IRR | 26 January 2010, 03:02:31 UTC |
| a8d0b66 | Linus Torvalds | 26 January 2010, 03:02:06 UTC | Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6 * 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix memory leak in update path UBI: add more checks to chdev open UBI: initialise update marker | 26 January 2010, 03:02:06 UTC |
| c799d15 | Linus Torvalds | 26 January 2010, 03:00:56 UTC | Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (fschmd) Fix a memleak on multiple opens of /dev/watchdog hwmon: (asus_atk0110) Do not fail if MBIF is missing hwmon: (amc6821) Double unlock bug hwmon: (smsc47m1) Fix section mismatch | 26 January 2010, 03:00:56 UTC |
| abefedd | Linus Torvalds | 26 January 2010, 02:59:47 UTC | Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (95 commits) drm/radeon/kms: preface warning printk with driver name drm/radeon/kms: drop unnecessary printks. drm: fix regression in fb blank handling drm/radeon/kms: make hibernate work on IGPs drm/vmwgfx: Optimize memory footprint for DMA buffers. drm/ttm: Allow system memory as a busy placement. drm/ttm: Fix race condition in ttm_bo_delayed_delete (v3, final) drm/nv50: prevent switching off SOR when in use for DVI-over-DP drm/nv50: fail auxch transaction if reply count not what we expect drm/nouveau: fix failure path if userspace specifies no valid memtypes drm/nouveau: report LVDS as disconnected if lid closed drm/radeon/kms: fix legacy get_engine/memory clock drm/radeon/kms/atom: atom parser fixes drm/radeon/kms: clean up atombios pll code drm/radeon/kms: clean up pll struct drm/radeon/kms/atom: fix crtc lock ordering drm/radeon: r6xx/r7xx possible security issue, system ram access drm/radeon/kms: r600/r700 don't test ib if ib initialization fails drm/radeon/kms: Forbid creation of framebuffer with no valid GEM object drm/radeon/kms: r600 handle irq vector ring overflow ... | 26 January 2010, 02:59:47 UTC |
| 840f51f | Linus Torvalds | 26 January 2010, 02:57:25 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix IRQ ->set_affinity() methods. sparc: cpumask_of_node() should handle -1 as a node sparc64: Update defconfig. sparc: Add missing SW perf fault events. sparc64: Fully support both performance counters. sparc64: Add perf callchain support. sparc: convert to arch_gettimeoffset() sparc: leds_resource.end assigned to itself in clock_board_probe() sparc32: Fix page_to_phys(). sparc: Simplify param.h by simply including <asm-generic/param.h> sparc32: Update defconfig. SPARC: use helpers for rlimits sparc: copy_from_user() should not return -EFAULT | 26 January 2010, 02:57:25 UTC |
| e219778 | Linus Torvalds | 26 January 2010, 02:57:07 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) virtio_net: Make delayed refill more reliable sfc: Use fixed-size buffers for MCDI NVRAM requests sfc: Add workspace for GMAC bug workaround to MCDI MAC_STATS buffer tcp_probe: avoid modulus operation and wrap fix qlge: Only free resources if they were allocated netns xfrm: deal with dst entries in netns sky2: revert config space change vlan: fix vlan_skb_recv() netns xfrm: fix "ip xfrm state|policy count" misreport sky2: Enable/disable WOL per hardware device net: Fix IPv6 GSO type checks in Intel ethernet drivers igb/igbvf: cleanup exception handling in tx_map_adv MAINTAINERS: Add Intel igbvf maintainer e1000/e1000e: don't use small hardware rx buffers fmvj18x_cs: add new id (Panasonic lan & modem card) be2net: swap only first 2 fields of mcc_wrb Please add support for Microsoft MN-120 PCMCIA network card be2net: fix bug in rx page posting wimax/i2400m: Add support for more i6x50 SKUs e1000e: enhance frame fragment detection ... | 26 January 2010, 02:57:07 UTC |
| 4f4e65d | Linus Torvalds | 26 January 2010, 02:56:12 UTC | Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (25 commits) OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer PM debug: Fix warning when no CONFIG_DEBUG_FS OMAP3: PM: DSS PM_WKEN to refill DMA OMAP: timekeeping: time should not stop during suspend OMAP3: PM: Force write last pad config register into save area OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get() OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modules OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS OMAP3: PM: Removing redundant and potentially dangerous PRCM configration OMAP3: Fixed ARM aux ctrl register save/restore OMAP3: CPUidle: Fixed timer resolution OMAP3: PM: Remove duplicate code blocks OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI OMAP3: PM: Enable system control module autoidle OMAP3: PM: Ack pending interrupts before entering suspend omap: Enable GPMC clock in gpmc_init OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0" OMAP4: clocks: Fix the clksel_rate struct DPLL divs OMAP4: PRCM: Fix the base address for CHIRONSS reg defines OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch() ... | 26 January 2010, 02:56:12 UTC |
| 39d3215 | Herbert Xu | 25 January 2010, 23:51:01 UTC | virtio_net: Make delayed refill more reliable I have seen RX stalls on a machine that experienced a suspected OOM. After the stall, the RX buffer is empty on the guest side and there are exactly 16 entries available on the host side. As the number of entries is less than that required by a maximal skb, the host cannot proceed. The guest did not have a refill job scheduled. My diagnosis is that an OOM had occured, with the delayed refill job scheduled. The job was able to allocate at least one skb, but not enough to overcome the minimum required by the host to proceed. As the refill job would only reschedule itself if it failed completely to allocate any skbs, this would lead to an RX stall. The following patch removes this stall possibility by always rescheduling the refill job until the ring is totally refilled. Testing has shown that the RX stall no longer occurs whereas previously it would occur within a day. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 23:51:01 UTC |
| 5a27e86 | Ben Hutchings | 25 January 2010, 23:49:59 UTC | sfc: Use fixed-size buffers for MCDI NVRAM requests The low-level MCDI code always uses 32-bit MMIO operations, and callers must pad input and output buffers to multiples of 4 bytes. The MCDI NVRAM functions are not doing this. Also, their buffers are declared as variable-length arrays with no explicit maximum length. Switch to a fixed buffer size based on the chunk size used by the MTD driver (which is a multiple of 4). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 23:49:59 UTC |
| 8704a2c | Guido Barzini | 25 January 2010, 23:49:19 UTC | sfc: Add workspace for GMAC bug workaround to MCDI MAC_STATS buffer Due to a hardware bug in the SFC9000 family, the firmware must transfer raw GMAC statistics to host memory before aggregating them into the cooked (speed-independent) MAC statistics. Extend the stats buffer to support this. The length of the buffer is explicit in the MAC_STATS command, so this change is backward-compatible on both sides. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 23:49:19 UTC |
| f81074f | Stephen Hemminger | 25 January 2010, 23:47:50 UTC | tcp_probe: avoid modulus operation and wrap fix By rounding up the buffer size to power of 2, several expensive modulus operations can be avoided. This patch also solves a bug where the gap need when ring gets full was not being accounted for. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 23:47:50 UTC |
| 4f9a91c | Breno Leitao | 25 January 2010, 23:46:58 UTC | qlge: Only free resources if they were allocated Currently qlge tries to release regions even if they were not allocated. This causes messages like the following in the kernel log Trying to free nonexistent resource <00000000006af400-00000000006af4ff> Trying to free nonexistent resource <00003c04ff9f4000-00003c04ff9f7fff> Trying to free nonexistent resource <00003c04ffc00000-00003c04ffcfffff> This patch fixes the goto logic in order to not release the resources if they were not allocated. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 23:46:58 UTC |
| ef39a1b | Denis Turischev | 21 January 2010, 14:10:07 UTC | [WATCHDOG] sbc_fitpc2_wdt: fix I/O space access technique. The mdelay function was used between I/O access commands, that causes peak in CPU usage. Fix it by substitution mdelay to msleep. Expand usage on fitPC2 compatible boards according to DMI identification. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 25 January 2010, 19:48:49 UTC |
| bd1f46d | Andrew Patterson | 22 January 2010, 21:06:53 UTC | PCI: fix nested spinlock hang in aer_inject The aer_inject module hangs in aer_inject() when checking the device's error masks. The hang is due to a recursive use of the aer_inject lock. The aer_inject() routine grabs the lock while processing the error and then calls pci_read_config_dword to read the masks. The pci_read_config_dword routine is earlier overridden by pci_read_aer, which among other things, grabs the aer_inject lock. Fixed by moving the pci_read_config_dword calls to read the masks to before the lock is taken. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> | 25 January 2010, 18:42:52 UTC |
| 86f2ce0 | Takashi Iwai | 25 January 2010, 16:00:01 UTC | Merge branch 'fix/hda' into for-linus | 25 January 2010, 16:00:01 UTC |
| 40aa703 | Guennadi Liakhovetski | 22 January 2010, 17:00:03 UTC | ASoC: fix a memory-leak in wm8903 Remember to free the temporary register-cache. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 25 January 2010, 14:41:05 UTC |
| 443c39b | Wei Yongjun | 22 January 2010, 06:21:29 UTC | KVM: x86: Fix leak of free lapic date in kvm_arch_vcpu_init() In function kvm_arch_vcpu_init(), if the memory malloc for vcpu->arch.mce_banks is fail, it does not free the memory of lapic date. This patch fixed it. Cc: stable@kernel.org Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> | 25 January 2010, 14:26:40 UTC |
| 36cb93f | Wei Yongjun | 22 January 2010, 06:18:47 UTC | KVM: x86: Fix probable memory leak of vcpu->arch.mce_banks vcpu->arch.mce_banks is malloc in kvm_arch_vcpu_init(), but never free in any place, this may cause memory leak. So this patch fixed to free it in kvm_arch_vcpu_uninit(). Cc: stable@kernel.org Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> | 25 January 2010, 14:26:40 UTC |
| 062d5e9 | Christian Borntraeger | 21 January 2010, 11:19:07 UTC | KVM: S390: fix potential array overrun in intercept handling kvm_handle_sie_intercept uses a jump table to get the intercept handler for a SIE intercept. Static code analysis revealed a potential problem: the intercept_funcs jump table was defined to contain (0x48 >> 2) entries, but we only checked for code > 0x48 which would cause an off-by-one array overflow if code == 0x48. Use the compiler and ARRAY_SIZE to automatically set the limits. Cc: stable@kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> | 25 January 2010, 14:26:39 UTC |
| b6a114d | Michael S. Tsirkin | 13 January 2010, 17:12:30 UTC | KVM: fix spurious interrupt with irqfd kvm didn't clear irqfd counter on deassign, as a result we could get a spurious interrupt when irqfd is assigned back. this leads to poor performance and, in theory, guest crash. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 25 January 2010, 14:26:39 UTC |
| cb289d6 | Davide Libenzi | 13 January 2010, 17:34:36 UTC | eventfd - allow atomic read and waitqueue remove KVM needs a wait to atomically remove themselves from the eventfd ->poll() wait queue head, in order to handle correctly their IRQfd deassign operation. This patch introduces such API, plus a way to read an eventfd from its context. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Avi Kivity <avi@redhat.com> | 25 January 2010, 14:26:38 UTC |
| a6085fb | Marcelo Tosatti | 14 January 2010, 19:41:27 UTC | KVM: MMU: bail out pagewalk on kvm_read_guest error Exit the guest pagetable walk loop if reading gpte failed. Otherwise its possible to enter an endless loop processing the previous present pte. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> | 25 January 2010, 14:26:38 UTC |
| d72118c | Marcelo Tosatti | 12 January 2010, 18:42:09 UTC | KVM: properly check max PIC pin in irq route setup Otherwise memory beyond irq_states[16] might be accessed. Noticed by Juan Quintela. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 25 January 2010, 14:26:38 UTC |
| f1d1c30 | Michael S. Tsirkin | 13 January 2010, 16:58:09 UTC | KVM: only allow one gsi per fd Looks like repeatedly binding same fd to multiple gsi's with irqfd can use up a ton of kernel memory for irqfd structures. A simple fix is to allow each fd to only trigger one gsi: triggering a storm of interrupts in guest is likely useless anyway, and we can do it by binding a single gsi to many interrupts if we really want to. Cc: stable@kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Acked-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 25 January 2010, 14:26:37 UTC |
| 82b7005 | Sheng Yang | 05 January 2010, 11:02:28 UTC | KVM: x86: Fix host_mapping_level() When found a error hva, should not return PAGE_SIZE but the level... Also clean up the coding style of the following loop. Cc: stable@kernel.org Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> | 25 January 2010, 14:26:37 UTC |
| e1f829b | Alexander Graf | 20 December 2009, 21:24:06 UTC | KVM: powerpc: Show timing option only on embedded Embedded PowerPC KVM has an exit timing implementation to track and evaluate how much time was spent in which exit path. For Book3S, we don't implement it. So let's not expose it as a config option either. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com> | 25 January 2010, 14:26:36 UTC |
| a5d36f8 | Avi Kivity | 29 December 2009, 10:42:16 UTC | KVM: Fix race between APIC TMR and IRR When we queue an interrupt to the local apic, we set the IRR before the TMR. The vcpu can pick up the IRR and inject the interrupt before setting the TMR, and perhaps even EOI it, causing incorrect behaviour. The race is really insignificant since it can only occur on the first interrupt (usually following interrupts will not change TMR), but it's better closed than open. Fixed by reordering setting the TMR vs IRR. Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> | 25 January 2010, 14:26:36 UTC |
| c453615 | Hans de Goede | 25 January 2010, 14:00:50 UTC | hwmon: (fschmd) Fix a memleak on multiple opens of /dev/watchdog When /dev/watchdog gets opened a second time we return -EBUSY, but we already have got a kref then, so we end up leaking our data struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org | 25 January 2010, 14:00:50 UTC |
| 5542482 | Luca Tettamanti | 25 January 2010, 14:00:49 UTC | hwmon: (asus_atk0110) Do not fail if MBIF is missing MBIF (motherboard identification) is only used to print the name of the board, it's not essential for the driver; do not fail if it's missing. Based on Juan's patch. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Juan RP <xtraeme@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 25 January 2010, 14:00:49 UTC |
| 316e266 | Dan Carpenter | 25 January 2010, 14:00:49 UTC | hwmon: (amc6821) Double unlock bug The mutex gets unlocked after we goto EXIT. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 25 January 2010, 14:00:49 UTC |
| a00d643 | Jeff Mahoney | 25 January 2010, 14:00:48 UTC | hwmon: (smsc47m1) Fix section mismatch smsc47m1_restore is called from sm_smsc47m1_exit, which is an __exit function, so it can't be __init. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> | 25 January 2010, 14:00:48 UTC |
| 973b8cb | Łukasz Wojniłowicz | 24 January 2010, 13:12:37 UTC | ALSA: hda - add possibility to choose speakers configuration for 4930g Now one can choose speaker configuration in e.g. PulseAudio mixer Signed-off-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 25 January 2010, 07:00:02 UTC |
| d7c7544 | Alexey Dobriyan | 25 January 2010, 06:47:53 UTC | netns xfrm: deal with dst entries in netns GC is non-existent in netns, so after you hit GC threshold, no new dst entries will be created until someone triggers cleanup in init_net. Make xfrm4_dst_ops and xfrm6_dst_ops per-netns. This is not done in a generic way, because it woule waste (AF_MAX - 2) * sizeof(struct dst_ops) bytes per-netns. Reorder GC threshold initialization so it'd be done before registering XFRM policies. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 06:47:53 UTC |
| a40ccc6 | stephen hemminger | 24 January 2010, 18:46:06 UTC | sky2: revert config space change Obviously, this register had some other impact that is causing the regression. Either it is masking some other access or needs to be reset in some path. Either, way it is best to just revert the change for 2.6.33 This reverts commit 166a0fd4c788ec7f10ca8194ec6d526afa12db75. Signed-off-by: David S. Miller <davem@davemloft.net> | 25 January 2010, 06:37:07 UTC |
| 7087e16 | Dave Airlie | 25 January 2010, 06:13:55 UTC | drm/radeon/kms: preface warning printk with driver name This just adds a little more info to the warning for old -ati/mesa userspaces. Signed-off-by: Dave Airlie <airlied@redhat.com> | 25 January 2010, 06:13:55 UTC |
