acc214b | Huang Rui | 19 January 2021, 05:35:21 UTC | drm/amdgpu: remove gpu info firmware of green sardine The ip discovery is supported on green sardine, it doesn't need gpu info firmware anymore. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x | 21 January 2021, 15:46:05 UTC |
348fe1c | Sung Lee | 05 January 2021, 19:32:29 UTC | drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case [WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x | 21 January 2021, 15:45:58 UTC |
c8f6364 | Dave Airlie | 15 January 2021, 03:17:54 UTC | Merge branch '04.00-ampere-lite-fixes' of git://github.com/skeggsb/linux into drm-fixes As requested, here's a tree with the non-Ampere-specific fixes split out, as most of them are potentially relevant to already-supported GPUs. - irq handling fix - expansion ROM fix - hw init dpcd disable - aux semaphore owner field fix - vram heap sizing fix - notifier at 0 is valid fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv4P90mcF_ByAh+ghz+ZVD2N2bPbD7xHYYArE1kYrvsGcQ@mail.gmail.com | 15 January 2021, 03:26:44 UTC |
8e10959 | Dave Airlie | 15 January 2021, 01:56:21 UTC | Merge tag 'amd-drm-fixes-5.11-2021-01-14' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-01-14: amdgpu: - Update repo location in MAINTAINERS - Add some new renoir PCI IDs - Revert CRC UAPI changes - Revert OLED display fix which cases clocking problems for some systems - Misc vangogh fixes - GFX fix for sienna cichlid - DCN1.0 fix for pipe split - Fix incorrect PSP command amdkfd: - Fix possible out of bounds read in vcrat creation Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210114201354.3998-1-alexander.deucher@amd.com | 15 January 2021, 01:56:22 UTC |
667d11d | Dave Airlie | 15 January 2021, 01:47:04 UTC | Merge tag 'drm-intel-fixes-2021-01-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11-rc4: - Allow the sysadmin to override security mitigations - Restore clear-residual mitigations for ivb/byt - Limit VFE threads based on GT - GVT: fix vfio edid and full display detection - Fix DSI DSC power refcounting - Fix LPT CPU mode backlight takeover - Disable RPM wakeref assertions during driver shutdown - Fix DSI sequence sleeps Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sg73pz42.fsf@intel.com | 15 January 2021, 01:47:05 UTC |
caeb6ab | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0 VRAM offset 0 is a valid address, triggered on GA102. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:17 UTC |
add4278 | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/mmu: fix vram heap sizing Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:17 UTC |
ba6e9ab | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields Noticed while debugging GA102. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:16 UTC |
8ad95ed | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/i2c/gk110-: disable hw-initiated dpcd reads RM does this around transactions, and it seemed to help while debugging AUXCH issues on GA102. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:16 UTC |
b5510d1 | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/i2c/gk110: split out from i2c/gk104 No functional changes here yet. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:15 UTC |
e05e06c | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/privring: ack interrupts the same way as RM Whatever it is that we were doing before doesn't work on Ampere. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:15 UTC |
402a896 | Ben Skeggs | 13 January 2021, 07:12:52 UTC | drm/nouveau/bios: fix issue shadowing expansion ROMs This issue has generally been covered up by the presence of additional expansion ROMs after the ones we're interested in, with header fetches of subsequent images loading enough of the ROM to hide the issue. Noticed on GA102, which lacks a type 0x70 image compared to TU102,. [ 906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes [ 906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes [ 906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes [ 906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes vs [ 22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes [ 22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes [ 23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes [ 23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes [ 23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes Signed-off-by: Ben Skeggs <bskeggs@redhat.com> | 15 January 2021, 00:25:14 UTC |
61502e3 | Dave Airlie | 15 January 2021, 00:16:40 UTC | Merge tag 'drm-misc-fixes-2021-01-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * dma-buf: Fix a memory leak in CMAV heap * drm: Fix format check for legacy pageflips * ttm: Pass correct address to dma_mapping_error(); Use mutex in pool shrinker Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/X/2iXO4ofFSZ39/v@linux-uq9g | 15 January 2021, 00:16:46 UTC |
2f0fa78 | Wayne Lin | 24 November 2020, 11:57:03 UTC | drm/amd/display: Fix to be able to stop crc calculation [Why] Find out when we try to disable CRC calculation, crc generation is still enabled. Main reason is that dc_stream_configure_crc() will never get called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE. [How] Add checking condition that when source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call dc_stream_configure_crc() to disable crc calculation. Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 19:06:43 UTC |
a7ddd22 | Rodrigo Siqueira | 07 January 2021, 20:09:30 UTC | Revert "drm/amd/display: Expose new CRC window property" This reverts commit c920888c604d72799d057bbcd9e28a6c003ccfbe. Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Roman Li <Roman.Li@amd.com> Cc: Bindu R <Bindu.R@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 19:05:17 UTC |
3c517ca | Rodrigo Siqueira | 07 January 2021, 19:51:49 UTC | Revert "drm/amdgpu/disply: fix documentation warnings in display manager" This reverts commit 6ae09fa49147e557eb6aebbb5b2059b63706d454. Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Roman Li <Roman.Li@amd.com> Cc: Bindu R <Bindu.R@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 19:02:40 UTC |
55df908 | Rodrigo Siqueira | 07 January 2021, 19:50:51 UTC | Revert "drm/amd/display: Fix unused variable warning" This reverts commit f01afd1ee48816457fb22e201f1d0cfb14589904. Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Roman Li <Roman.Li@amd.com> Cc: Bindu R <Bindu.R@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 19:02:31 UTC |
4369376 | Likun Gao | 08 January 2021, 08:34:31 UTC | drm/amdgpu: set power brake sequence Add function to set power brake sequence. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 19:01:24 UTC |
53f1e7f | mengwang | 12 August 2020, 03:49:29 UTC | drm/amdgpu: add new device id for Renior add DID 0x164C into pciidlist under CHIP_RENOIR family. Signed-off-by: mengwang <mengbing.wang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x | 14 January 2021, 05:25:57 UTC |
21702c8 | Prike Liang | 02 October 2020, 14:58:55 UTC | drm/amdgpu: add green_sardine device id (v2) Add green_sardine PCI id support and map it to renoir asic type. v2: add apu flag Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x | 14 January 2021, 05:25:40 UTC |
12f2df7 | Huang Rui | 13 January 2021, 12:13:17 UTC | drm/amdgpu: fix vram type and bandwidth error for DDR5 and DDR4 This patch is to update atomfirmware parser for the memory type and bandwidth of DDR5 and DDR4. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:25:13 UTC |
04eb6e7 | chen gong | 08 January 2021, 04:46:44 UTC | drm/amdgpu/gfx10: add updated GOLDEN_TSC_COUNT_UPPER/LOWER register offsets for VGH The address of the GOLDEN_TSC_COUNT_UPPER/GOLDEN_TSC_COUNT_LOWER for Vnagogh are different from the others. The offset of the GOLDEN_TSC_COUNT_UPPER for Vangogh is 0x0025 by calculation. The offset of the GOLDEN_TSC_COUNT_LOWER for Vangogh is 0x0026 by calculation. Signed-off-by: chen gong <curry.gong@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:24:52 UTC |
8b335bf | Jeremy Cline | 11 January 2021, 21:05:28 UTC | drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu() KASAN reported a slab-out-of-bounds read of size 1 in kdf_create_vcrat_image_cpu(). This occurs when, for example, when on an x86_64 with a single NUMA node because kfd_fill_iolink_info_for_cpu() is a no-op, but afterwards the sub_type_hdr->length, which is out-of-bounds, is read and multiplied by entries. Fortunately, entries is 0 in this case so the overall crat_table->length is still correct. Check if there were any entries before de-referencing sub_type_hdr which may be pointing to out-of-bounds memory. Fixes: b7b6c38529c9 ("drm/amdkfd: Calculate CPU VCRAT size dynamically (v2)") Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:23:39 UTC |
4eec66c | Rodrigo Siqueira | 11 January 2021, 16:31:51 UTC | Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel" commit a861736dae64 ("drm/amd/display: Fixed Intermittent blue screen on OLED panel") causes power regression for many users. It seems that this change causes the MCLK to get forced high; this creates a regression for many users since their devices were not able to drop to a low state after this change. For this reason, this reverts commit a861736dae644a0d7abbca0c638ae6aad28feeb8. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407 Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Naveed Ashfaq <Naveed.Ashfaq@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Roman Li <roman.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 14 January 2021, 05:23:01 UTC |
9d03bb1 | Li, Roman | 30 December 2020, 18:03:02 UTC | drm/amd/display: disable dcn10 pipe split by default [Why] The initial purpose of dcn10 pipe split is to support some high bandwidth mode which requires dispclk greater than max dispclk. By initial bring up power measurement data, it showed power consumption is less with pipe split for dcn block. This could be reason for enable pipe split by default. By battery life measurement of some Chromebooks, result shows battery life is longer with pipe split disabled. [How] Disable pipe split by default. Pipe split could be still enabled when required dispclk is greater than max dispclk. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:22:16 UTC |
0eb31a8 | Nikola Cornij | 30 December 2020, 04:33:32 UTC | drm/amd/display: Add a missing DCN3.01 API mapping [why] Required for DSC MST Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:21:43 UTC |
4336be4 | Wesley Chalmers | 14 December 2020, 20:35:02 UTC | drm/amd/display: Initialize stack variable [WHY] The stack variable "val" is potentially unpopulate it, so initialize it with the value 0xf (indicating an invalid mux) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:18:33 UTC |
7364414 | Qingqing Zhuo | 09 December 2020, 23:04:04 UTC | drm/amd/display: NULL pointer hang [Why] In dc_link_dp_set_test_pattern, we assume all pipes have a stream, which can cause null pointer dereference. [How] Add a null pointer check before accessing stream. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:17:16 UTC |
f14a5c3 | Victor Zhao | 05 January 2021, 07:04:01 UTC | drm/amdgpu/psp: fix psp gfx ctrl cmds psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux, according to psp, linux cmds are not correct. v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD. Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Reviewed-by: Emily.Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:15:58 UTC |
ff9346d | Alexandre Demers | 07 January 2021, 23:53:03 UTC | drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921) This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in amdgpu_device_asic_has_dc_support(). This info should be only called once. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921 Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 14 January 2021, 05:14:43 UTC |
101c2fa | Alex Deucher | 05 January 2021, 20:14:29 UTC | MAINTAINERS: update radeon/amdgpu/amdkfd git trees FDO is out of space, so move to gitlab. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | 14 January 2021, 05:14:09 UTC |
984cade | Chris Wilson | 11 January 2021, 22:52:20 UTC | drm/i915: Allow the sysadmin to override security mitigations The clear-residuals mitigation is a relatively heavy hammer and under some circumstances the user may wish to forgo the context isolation in order to meet some performance requirement. Introduce a generic module parameter to allow selectively enabling/disabling different mitigations. To disable just the clear-residuals mitigation (on Ivybridge, Baytrail, or Haswell) use the module parameter: i915.mitigations=auto,!residuals Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858 Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org # v5.7 Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk (cherry picked from commit f7452c7cbd5b5dfb9a6c84cb20bea04c89be50cd) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 12 January 2021, 17:03:40 UTC |
09aa9e4 | Chris Wilson | 11 January 2021, 22:52:19 UTC | drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail The mitigation is required for all gen7 platforms, now that it does not cause GPU hangs, restore it for Ivybridge and Baytrail. Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Bloomfield Jon <jon.bloomfield@intel.com> Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk (cherry picked from commit 008ead6ef8f588a8c832adfe9db201d9be5fd410) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 12 January 2021, 17:03:40 UTC |
ffaf978 | Chris Wilson | 11 January 2021, 22:52:18 UTC | drm/i915/gt: Limit VFE threads based on GT MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the range [0, n-1] where n is #EU * (#threads/EU) with the number of threads based on plaform and the number of EU based on the number of slices and subslices. This is a fixed number per platform/gt, so appropriately limit the number of threads we spawn to match the device. v2: Oversaturate the system with tasks to force execution on every HW thread; if the thread idles it is returned to the pool and may be reused again before an unused thread. v3: Fix more state commands, which was causing Baytrail to barf. v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024 Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Randy Wright <rwright@hpe.com> Cc: stable@vger.kernel.org # v5.7+ Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk (cherry picked from commit eebfb32e26851662d24ea86dd381fd0f83cd4b47) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 12 January 2021, 17:03:40 UTC |
bb52cb0 | Christian König | 11 January 2021, 13:44:57 UTC | drm/ttm: make the pool shrinker lock a mutex set_pages_wb() might sleep and so we can't do this in an atomic context. Signed-off-by: Christian König <christian.koenig@amd.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Reviewed-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/413409/ | 12 January 2021, 13:02:08 UTC |
a5e92ef | Bas Nieuwenhuizen | 10 January 2021, 02:11:42 UTC | drm: Check actual format for legacy pageflip. With modifiers one can actually have different format_info structs for the same format, which now matters for AMDGPU since we convert implicit modifiers to explicit modifiers with multiple planes. I checked other drivers and it doesn't look like they end up triggering this case so I think this is safe to relax. Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Fixes: 816853f9dc40 ("drm/amd/display: Set new format info for converted metadata.") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210110021142.28221-1-bas@basnieuwenhuizen.nl | 11 January 2021, 21:20:15 UTC |
843010a | Jeremy Cline | 11 January 2021, 16:40:33 UTC | drm/ttm: Fix address passed to dma_mapping_error() in ttm_pool_map() check_unmap() is producing a warning about a missing map error check. The return value from dma_map_page() should be checked for an error, not the caller-provided dma_addr. Fixes: d099fc8f540a ("drm/ttm: new TT backend allocation pool v3") Signed-off-by: Jeremy Cline <jcline@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/413432/ Signed-off-by: Christian König <christian.koenig@amd.com> | 11 January 2021, 20:18:27 UTC |
166ae73 | Jani Nikula | 11 January 2021, 18:13:00 UTC | Merge tag 'gvt-fixes-2020-01-08' of https://github.com/intel/gvt-linux into drm-intel-fixes gvt-fixes-2020-01-08 - Fix VFIO EDID on APL/BXT (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108045911.GF15982@zhen-hp.sh.intel.com | 11 January 2021, 18:13:00 UTC |
2af5268 | Imre Deak | 09 December 2020, 15:39:52 UTC | drm/i915/icl: Fix initing the DSI DSC power refcount during HW readout For an enabled DSC during HW readout the corresponding power reference is taken along the CRTC power domain references in get_crtc_power_domains(). Remove the incorrect get ref from the DSI encoder hook. Fixes: 2b68392e638d ("drm/i915/dsi: add support for DSC") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201209153952.3397959-1-imre.deak@intel.com (cherry picked from commit 3a9ec563a4ff770ae647f6ee539810f1866866c9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 January 2021, 17:16:53 UTC |
bb83d5f | Jani Nikula | 08 January 2021, 15:28:41 UTC | drm/i915/backlight: fix CPU mode backlight takeover on LPT The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight() functions operate directly on the hardware registers. If inverting the value is needed, using intel_panel_compute_brightness(), it should only be done in the interface between hardware registers and panel->backlight.level. The CPU mode takeover code added in commit 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the hardware register and converts to panel->backlight.level correctly, however the value written back should remain in the hardware register "domain". This hasn't been an issue, because GM45 machines are the only known users of i915.invert_brightness and the brightness invert quirk, and without one of them no conversion is made. It's likely nobody's ever hit the problem. Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.1+ Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com (cherry picked from commit 0d4ced1c5bfe649196877d90442d4fd618e19153) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 January 2021, 10:10:34 UTC |
057fe35 | Chris Wilson | 04 January 2021, 20:39:05 UTC | drm/i915: Disable RPM wakeref assertions during driver shutdown As with the regular suspend paths, also disable the wakeref assertions as we disable the driver during shutdown. Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899 Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk (cherry picked from commit 19fe4ac6f0e7163daf9375a4d39947389ae465fa) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 January 2021, 10:10:34 UTC |
00cb645 | Hans de Goede | 18 November 2020, 12:40:58 UTC | drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence Commit 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") added an intel_dsi_msleep() helper which skips sleeping if the MIPI-sequences have a version of 3 or newer and the panel is in vid-mode; and it moved a bunch of msleep-s over to this new helper. This was based on my reading of the big comment around line 730 which starts with "Panel enable/disable sequences from the VBT spec.", where the "v3 video mode seq" column does not have any wait t# entries. Given that this code has been used on a lot of different devices without issues until now, it seems that my interpretation of the spec here is mostly correct. But now I have encountered one device, an Acer Aspire Switch 10 E SW3-016, where the panel will not light up unless we do actually honor the panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence. What seems to set this model apart is that it is lacking a MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on delay usually happens. Fix the panel not lighting up on this model by using an unconditional msleep(panel_on_delay) instead of intel_dsi_msleep() when there is no MIPI_SEQ_DEASSERT_RESET sequence. Fixes: 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com (cherry picked from commit 6fdb335f1c9c0845b50625de1624d8445c4c4a07) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 11 January 2021, 10:10:34 UTC |
7c53f6b | Linus Torvalds | 10 January 2021, 22:34:50 UTC | Linux 5.11-rc3 | 10 January 2021, 22:34:50 UTC |
20210a9 | Linus Torvalds | 10 January 2021, 21:24:55 UTC | Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Search for <ncurses.h> in the default header path of HOSTCC - Tweak the option order to be kind to old BSD awk - Remove 'kvmconfig' and 'xenconfig' shorthands - Fix documentation * tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: kbuild: Fix section reference kconfig: remove 'kvmconfig' and 'xenconfig' shorthands lib/raid6: Let $(UNROLL) rules work with macOS userland kconfig: Support building mconf with vendor sysroot ncurses kconfig: config script: add a little user help MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal | 10 January 2021, 21:24:55 UTC |
688daed | Linus Torvalds | 10 January 2021, 21:17:21 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is two driver fixes (megaraid_sas and hisi_sas). The megaraid one is a revert of a previous revert of a cpu hotplug fix which exposed a bug in the block layer which has been fixed in this merge window. The hisi_sas performance enhancement comes from switching to interrupt managed completion queues, which depended on the addition of devm_platform_get_irqs_affinity() which is now upstream via the irq tree in the last merge window" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Expose HW queues for v2 hw Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug"" | 10 January 2021, 21:17:21 UTC |
ed41fd0 | Linus Torvalds | 10 January 2021, 20:53:08 UTC | Merge tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: - Missing CRC32 selections (Arnd) - Fix for a merge window regression with bdev inode init (Christoph) - bcache fixes - rnbd fixes - NVMe pull request from Christoph: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im) - Use-after-free fix for partition iteration (Ming) - Missing blk-mq debugfs flag annotation (John) - Bdev freeze regression fix (Satya) - blk-iocost NULL pointer deref fix (Tejun) * tag 'block-5.11-2021-01-10' of git://git.kernel.dk/linux-block: (26 commits) bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket bcache: check unsupported feature sets for bcache register bcache: fix typo from SUUP to SUPP in features.h bcache: set pdev_set_uuid before scond loop iteration blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED block/rnbd-clt: avoid module unload race with close confirmation block/rnbd: Adding name to the Contributors List block/rnbd-clt: Fix sg table use after free block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close block/rnbd: Select SG_POOL for RNBD_CLIENT block: pre-initialize struct block_device in bdev_alloc_inode fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sb nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings ... | 10 January 2021, 20:53:08 UTC |
d430adf | Linus Torvalds | 10 January 2021, 20:39:38 UTC | Merge tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block Pull io_uring fixes from Jens Axboe: "A bit larger than I had hoped at this point, but it's all changes that will be directed towards stable anyway. In detail: - Fix a merge window regression on error return (Matthew) - Remove useless variable declaration/assignment (Ye Bin) - IOPOLL fixes (Pavel) - Exit and cancelation fixes (Pavel) - fasync lockdep complaint fix (Pavel) - Ensure SQPOLL is synchronized with creator life time (Pavel)" * tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block: io_uring: stop SQPOLL submit on creator's death io_uring: add warn_once for io_uring_flush() io_uring: inline io_uring_attempt_task_drop() io_uring: io_rw_reissue lockdep annotations io_uring: synchronise ev_posted() with waitqueues io_uring: dont kill fasync under completion_lock io_uring: trigger eventfd for IOPOLL io_uring: Fix return value from alloc_fixed_file_ref_node io_uring: Delete useless variable ‘id’ in io_prep_async_work io_uring: cancel more aggressively in exit_work io_uring: drop file refs after task cancel io_uring: patch up IOPOLL overflow_flush sync io_uring: synchronise IOPOLL on task_submit fail | 10 January 2021, 20:39:38 UTC |
28318f5 | Linus Torvalds | 10 January 2021, 20:33:19 UTC | Merge tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for 5.11-rc3. Include in here are: - USB gadget driver fixes for reported issues - new usb-serial driver ids - dma from stack bugfixes - typec bugfixes - dwc3 bugfixes - xhci driver bugfixes - other small misc usb driver bugfixes All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits) usb: dwc3: gadget: Clear wait flag on dequeue usb: typec: Send uevent for num_altmodes update usb: typec: Fix copy paste error for NVIDIA alt-mode description usb: gadget: enable super speed plus kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb usb: uas: Add PNY USB Portable SSD to unusual_uas usb: gadget: configfs: Preserve function ordering after bind failure usb: gadget: select CONFIG_CRC32 usb: gadget: core: change the comment for usb_gadget_connect usb: gadget: configfs: Fix use-after-free issue with udc_name usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup usb: usbip: vhci_hcd: protect shift size USB: usblp: fix DMA to stack USB: serial: iuu_phoenix: fix DMA from stack USB: serial: option: add LongSung M5710 module support USB: serial: option: add Quectel EM160R-GL USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug usb: gadget: f_uac2: reset wMaxPacketSize usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one ... | 10 January 2021, 20:33:19 UTC |
4ad9a28 | Linus Torvalds | 10 January 2021, 20:28:07 UTC | Merge tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.11-rc3. Nothing major, just resolving some reported issues: - cleanup some remaining mentions of the ION drivers that were removed in 5.11-rc1 - comedi driver bugfix - two error path memory leak fixes All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ION: remove some references to CONFIG_ION staging: mt7621-dma: Fix a resource leak in an error handling path Staging: comedi: Return -EFAULT if copy_to_user() fails staging: spmi: hisi-spmi-controller: Fix some error handling paths | 10 January 2021, 20:28:07 UTC |
e07cd2f | Linus Torvalds | 10 January 2021, 20:24:33 UTC | Merge tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.11-rc3. The majority here are fixes for the habanalabs drivers, but also in here are: - crypto driver fix - pvpanic driver fix - updated font file - interconnect driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) Fonts: font_ter16x32: Update font with new upstream Terminus release misc: pvpanic: Check devm_ioport_map() for NULL speakup: Add github repository URL and bug tracker MAINTAINERS: Update Georgi's email address crypto: asym_tpm: correct zero out potential secrets habanalabs: Fix memleak in hl_device_reset interconnect: imx8mq: Use icc_sync_state interconnect: imx: Remove a useless test interconnect: imx: Add a missing of_node_put after of_device_is_available interconnect: qcom: fix rpmh link failures habanalabs: fix order of status check habanalabs: register to pci shutdown callback habanalabs: add validation cs counter, fix misplaced counters habanalabs/gaudi: retry loading TPC f/w on -EINTR habanalabs: adjust pci controller init to new firmware habanalabs: update comment in hl_boot_if.h habanalabs/gaudi: enhance reset message habanalabs: full FW hard reset support habanalabs/gaudi: disable CGM at HW initialization habanalabs: Revise comment to align with mirror list name ... | 10 January 2021, 20:24:33 UTC |
5625dcf | Viresh Kumar | 07 January 2021, 11:42:08 UTC | Documentation: kbuild: Fix section reference Section 3.11 was incorrectly called 3.9, fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 10 January 2021, 20:14:38 UTC |
0653161 | Linus Torvalds | 10 January 2021, 20:00:26 UTC | Merge tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Address the 2nd boot failure due to snafu in signal handling code (first was generic console ttynull issue) - misc other fixes * tag 'arc-5.11-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [hsdk]: Enable FPU_SAVE_RESTORE ARC: unbork 5.11 bootup: fix snafu in _TIF_NOTIFY_SIGNAL handling include/soc: remove headers for EZChip NPS arch/arc: add copy_user_page() to <asm/page.h> to fix build error on ARC | 10 January 2021, 20:00:26 UTC |
b3cd1a1 | Linus Torvalds | 10 January 2021, 19:34:33 UTC | Merge tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for machine check handling with VMAP stack on 32-bit. - A clang build fix. Thanks to Christophe Leroy and Nathan Chancellor. * tag 'powerpc-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Handle .text.{hot,unlikely}.* in linker script powerpc/32s: Fix RTAS machine check with VMAP stack | 10 January 2021, 19:34:33 UTC |
a440e4d | Linus Torvalds | 10 January 2021, 19:31:17 UTC | Merge tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "As expected, fixes started trickling in after the holidays so here is the accumulated pile of x86 fixes for 5.11: - A fix for fanotify_mark() missing the conversion of x86_32 native syscalls which take 64-bit arguments to the compat handlers due to former having a general compat handler. (Brian Gerst) - Add a forgotten pmd page destructor call to pud_free_pmd_page() where a pmd page is freed. (Dan Williams) - Make IN/OUT insns with an u8 immediate port operand handling for SEV-ES guests more precise by using only the single port byte and not the whole s32 value of the insn decoder. (Peter Gonda) - Correct a straddling end range check before returning the proper MTRR type, when the end address is the same as top of memory. (Ying-Tsun Huang) - Change PQR_ASSOC MSR update scheme when moving a task to a resctrl resource group to avoid significant performance overhead with some resctrl workloads. (Fenghua Yu) - Avoid the actual task move overhead when the task is already in the resource group. (Fenghua Yu)" * tag 'x86_urgent_for_v5.11_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Don't move a task to the same resource group x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR x86/mtrr: Correct the range check before performing MTRR type lookups x86/sev-es: Fix SEV-ES OUT/IN immediate opcode vc handling x86/mm: Fix leak of pmd ptlock fanotify: Fix sys_fanotify_mark() on native x86-32 | 10 January 2021, 19:31:17 UTC |
a0adc8e | John Stultz | 07 January 2021, 20:26:16 UTC | dma-buf: cma_heap: Fix memory leak in CMA heap Bing Song noticed the CMA heap was leaking memory due to a flub I made in commit a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation"), and provided this fix which ensures the pagelist is also freed on release. Cc: Bing Song <bing.song@nxp.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Liam Mark <lmark@codeaurora.org> Cc: Laura Abbott <labbott@kernel.org> Cc: Brian Starkey <Brian.Starkey@arm.com> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Ørjan Eide <orjan.eide@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Simon Ser <contact@emersion.fr> Cc: James Jones <jajones@nvidia.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reported-by: Bing Song <bing.song@nxp.com> Fixes: a5d2d29e24be ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation") Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210107202616.75170-1-john.stultz@linaro.org | 10 January 2021, 17:38:21 UTC |
2ff9010 | Linus Torvalds | 09 January 2021, 19:22:30 UTC | Merge tag 'hwmon-for-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix possible KASAN issue in amd_energy driver - Avoid configuration problem in pwm-fan driver - Fix kernel-doc warning in sbtsi_temp documentation * tag 'hwmon-for-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (amd_energy) fix allocation of hwmon_channel_info config hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values hwmon: (sbtsi_temp) Fix Documenation kernel-doc warning | 09 January 2021, 19:22:30 UTC |
f408126 | Linus Torvalds | 09 January 2021, 19:18:02 UTC | Merge tag 'dmaengine-fix-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of dmaengine driver fixes for: - coverity discovered issues for xilinx driver - qcom, gpi driver fix for undefined bhaviour and one off cleanup - update Peter's email for TI DMA drivers - one-off for idxd driver - resource leak fix for mediatek and milbeaut drivers" * tag 'dmaengine-fix-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: stm32-mdma: fix STM32_MDMA_VERY_HIGH_PRIORITY value dmaengine: xilinx_dma: fix mixed_enum_type coverity warning dmaengine: xilinx_dma: fix incompatible param warning in _child_probe() dmaengine: xilinx_dma: check dma_async_device_register return value dmaengine: qcom: fix gpi undefined behavior dt-bindings: dma: ti: Update maintainer and author information MAINTAINERS: Add entry for Texas Instruments DMA drivers qcom: bam_dma: Delete useless kfree code dmaengine: dw-edma: Fix use after free in dw_edma_alloc_chunk() dmaengine: milbeaut-xdmac: Fix a resource leak in the error handling path of the probe function dmaengine: mediatek: mtk-hsdma: Fix a resource leak in the error handling path of the probe function dmaengine: qcom: gpi: Fixes a format mismatch dmaengine: idxd: off by one in cleanup code dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setup | 09 January 2021, 19:18:02 UTC |
caab314 | Linus Torvalds | 09 January 2021, 19:04:48 UTC | Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Three driver bugfixes for I2C. Buisness as usual" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Fix apdma and i2c hand-shake timeout i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated i2c: sprd: use a specific timeout to avoid system hang up issue | 09 January 2021, 19:04:48 UTC |
6bae85b | Darrick J. Wong | 09 January 2021, 06:46:02 UTC | maintainers: update my email address Change my email contact ahead of a likely painful eleven-month migration to a certain cobalt enteprisey groupware cloud product that will totally break my workflow. Some day I may get used to having to email being sequestered behind both claret and cerulean oath2+sms 2fa layers, but for now I'll stick with keying in one password to receive an email vs. the required four. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 January 2021, 18:56:00 UTC |
d9d0521 | Pavel Begunkov | 08 January 2021, 20:57:25 UTC | io_uring: stop SQPOLL submit on creator's death When the creator of SQPOLL io_uring dies (i.e. sqo_task), we don't want its internals like ->files and ->mm to be poked by the SQPOLL task, it have never been nice and recently got racy. That can happen when the owner undergoes destruction and SQPOLL tasks tries to submit new requests in parallel, and so calls io_sq_thread_acquire*(). That patch halts SQPOLL submissions when sqo_task dies by introducing sqo_dead flag. Once set, the SQPOLL task must not do any submission, which is synchronised by uring_lock as well as the new flag. The tricky part is to make sure that disabling always happens, that means either the ring is discovered by creator's do_exit() -> cancel, or if the final close() happens before it's done by the creator. The last is guaranteed by the fact that for SQPOLL the creator task and only it holds exactly one file note, so either it pins up to do_exit() or removed by the creator on the final put in flush. (see comments in uring_flush() around file->f_count == 2). One more place that can trigger io_sq_thread_acquire_*() is __io_req_task_submit(). Shoot off requests on sqo_dead there, even though actually we don't need to. That's because cancellation of sqo_task should wait for the request before going any further. note 1: io_disable_sqo_submit() does io_ring_set_wakeup_flag() so the caller would enter the ring to get an error, but it still doesn't guarantee that the flag won't be cleared. note 2: if final __userspace__ close happens not from the creator task, the file note will pin the ring until the task dies. Fixed: b1b6b5a30dce8 ("kernel/io_uring: cancel io_uring before task works") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:43 UTC |
6b5733e | Pavel Begunkov | 08 January 2021, 20:57:24 UTC | io_uring: add warn_once for io_uring_flush() files_cancel() should cancel all relevant requests and drop file notes, so we should never have file notes after that, including on-exit fput and flush. Add a WARN_ONCE to be sure. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:43 UTC |
4f793dc | Pavel Begunkov | 08 January 2021, 20:57:23 UTC | io_uring: inline io_uring_attempt_task_drop() A simple preparation change inlining io_uring_attempt_task_drop() into io_uring_flush(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:43 UTC |
55e6ac1 | Pavel Begunkov | 08 January 2021, 20:57:22 UTC | io_uring: io_rw_reissue lockdep annotations We expect io_rw_reissue() to take place only during submission with uring_lock held. Add a lockdep annotation to check that invariant. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:43 UTC |
5342fd4 | Coly Li | 04 January 2021, 07:41:22 UTC | bcache: set bcache device into read-only mode for BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature set, it means the cache device is created with obsoleted layout with obso_bucket_site_hi. Now bcache does not support this feature bit, a new BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added for a better layout to support large bucket size. For the legacy compatibility purpose, if a cache device created with obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache devices attached to this cache set should be set to read-only. Then the dirty data can be written back to backing device before re-create the cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit by the latest bcache-tools. This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit when running a cache set and attach a bcache device to the cache set. If this bit is set, - When run a cache set, print an error kernel message to indicate all following attached bcache device will be read-only. - When attach a bcache device, print an error kernel message to indicate the attached bcache device will be read-only, and ask users to update to latest bcache-tools. Such change is only for cache device whose bucket size >= 32MB, this is for the zoned SSD and almost nobody uses such large bucket size at this moment. If you don't explicit set a large bucket size for a zoned SSD, such change is totally transparent to your bcache device. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:03 UTC |
b16671e | Coly Li | 04 January 2021, 07:41:21 UTC | bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucket When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET was introduced into the incompat feature set. It used bucket_size_hi (which was added at the tail of struct cache_sb_disk) to extend current 16bit bucket size to 32bit with existing bucket_size in struct cache_sb_disk. This is not a good idea, there are two obvious problems, - Bucket size is always value power of 2, if store log2(bucket size) in existing bucket_size of struct cache_sb_disk, it is unnecessary to add bucket_size_hi. - Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in struct cache_sb_disk, bucket_size_hi was added after d[] which makes csum_set calculate an unexpected super block checksum. To fix the above problems, this patch introduces a new incompat feature bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it means bucket_size in struct cache_sb_disk stores the order of power-of-2 bucket size value. When user specifies a bucket size larger than 32768 sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to incompat feature set, and bucket_size stores log2(bucket size) more than store the real bucket size value. The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore, it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only recognized by kernel driver for legacy compatible purpose. The previous bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk and not used in bcache-tools anymore. For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature, bcache-tools and kernel driver still recognize the feature string and display it as "obso_large_bucket". With this change, the unnecessary extra space extend of bcache on-disk super block can be avoided, and csum_set() may generate expected check sum as well. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:03 UTC |
1dfc068 | Coly Li | 04 January 2021, 07:41:20 UTC | bcache: check unsupported feature sets for bcache register This patch adds the check for features which is incompatible for current supported feature sets. Now if the bcache device created by bcache-tools has features that current kernel doesn't support, read_super() will fail with error messoage. E.g. if an unsupported incompatible feature detected, bcache register will fail with dmesg "bcache: register_bcache() error : Unsupported incompatible feature found". Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:03 UTC |
f7b4943 | Coly Li | 04 January 2021, 07:41:19 UTC | bcache: fix typo from SUUP to SUPP in features.h This patch fixes the following typos, from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:03 UTC |
e809270 | Yi Li | 04 January 2021, 07:41:18 UTC | bcache: set pdev_set_uuid before scond loop iteration There is no need to reassign pdev_set_uuid in the second loop iteration, so move it to the place before second loop. Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 09 January 2021, 16:21:03 UTC |
996e435 | Linus Torvalds | 09 January 2021, 02:04:43 UTC | Merge tag 'zonefs-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fix from Damien Le Moal: "A single patch from Arnd to fix a missing dependency in zonefs Kconfig" * tag 'zonefs-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: select CONFIG_CRC32 | 09 January 2021, 02:04:43 UTC |
263da33 | Linus Torvalds | 09 January 2021, 01:18:50 UTC | Merge tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit fixes from Shuah Khan: "One fix to force the use of the 'tty' console for UML. Given that kunit tool requires the console output, explicitly stating the dependency makes sense than relying on it being the default" * tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Force the use of the 'tty' console for UML | 09 January 2021, 01:18:50 UTC |
8f3d849 | Linus Torvalds | 09 January 2021, 01:13:52 UTC | Merge tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Two minor fixes to vDSO test changes in this merge window" * tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vDSO: fix -Wformat warning in vdso_test_correctness selftests/vDSO: add additional binaries to .gitignore | 09 January 2021, 01:13:52 UTC |
50dbd96 | Linus Torvalds | 09 January 2021, 01:01:28 UTC | Merge tag 'docs-5.11-3' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A handful of relatively small documentation fixes" * tag 'docs-5.11-3' of git://git.lwn.net/linux: docs: admin-guide: bootconfig: Fix feils to fails Documentation/admin-guide: kernel-parameters: hyphenate comma-separated docs: binfmt-misc: Fix .rst formatting docs: remove mention of ENABLE_MUST_CHECK atomic: remove further references to atomic_ops Documentation: doc-guide: fixes to sphinx.rst docs/mm: concepts.rst: Correct the threshold to low watermark Documentation: admin: early_param()s are also listed in kernel-parameters docs: Fix reST markup when linking to sections | 09 January 2021, 01:01:28 UTC |
78d4202 | Linus Torvalds | 08 January 2021, 23:45:47 UTC | Merge tag 'devprop-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fixes from Rafael Wysocki: "Revert a problematic commit that went in during the 5.10 cycle and improve the kerneldoc description of the function affected by it (both changes from Bard Liao)" * tag 'devprop-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: add description of fwnode cases Revert "device property: Keep secondary firmware node secondary by type" | 08 January 2021, 23:45:47 UTC |
fb9ca0b | Linus Torvalds | 08 January 2021, 23:42:56 UTC | Merge tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These address two build issues and drop confusing text from a couple of Kconfig entries. Specifics: - Drop two local variables that are never read and the code updating their values from the x86 suspend-to-idle code (Rafael Wysocki) - Add empty stub of an ACPI helper function to avoid build issues when CONFIG_ACPI is not set (Shawn Guo) - Remove confusing text regarding modules from Kconfig entries that correspond to non-modular code (Peter Robinson)" * tag 'acpi-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Update Kconfig help text for items that are no longer modular ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI ACPI: PM: s2idle: Drop unused local variables and related code | 08 January 2021, 23:42:56 UTC |
be31d94 | Linus Torvalds | 08 January 2021, 23:39:25 UTC | Merge tag 'pm-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address two issues in the intel_pstate driver and one in the powernow-k8 cpufreq driver. Specifics: - Make the powernow-k8 cpufreq driver avoid calling cpufreq_cpu_get(), which theoretically may return NULL, to get a policy pointer that is known to it already (Colin Ian King) - Drop two functions that are not used any more from the intel_pstate driver (Lukas Bulwahn) - Make intel_pstate check the HWP capabilities to get the maximum available P-state in the passive mode to avoid using a stale value of it in case of out-of-band updates (Rafael Wysocki)" * tag 'pm-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: remove obsolete functions cpufreq: powernow-k8: pass policy rather than use cpufreq_cpu_get() cpufreq: intel_pstate: Use HWP capabilities in intel_cpufreq_adjust_perf() | 08 January 2021, 23:39:25 UTC |
43d3d58 | Linus Torvalds | 08 January 2021, 23:12:08 UTC | Merge tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Daniel Vetter: "Looks like people are back from the break, usual small pile of fixes all over. Next week Dave should be back. The only thing pending I'm aware of is a "this shouldn't have become uapi" reverts for amdgpu, but they're already on the list and not that important really so can wait another week. Summary: - fix for ttm list corruption in radeon, reported by a few people - fixes for amdgpu, i915, msm - dma-buf use-after free fix" * tag 'drm-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drm: (29 commits) drm/msm: Only enable A6xx LLCC code on A6xx drm/msm: Add modparam to allow vram carveout drm/msm: Call msm_init_vram before binding the gpu drm/msm/dp: postpone irq_hpd event during connection pending state drm/ttm: unexport ttm_pool_init/fini drm/radeon: stop re-init the TTM page pool dmabuf: fix use-after-free of dmabuf's file->f_inode Revert "drm/amd/display: Fix memory leaks in S3 resume" drm/amdgpu/display: drop DCN support for aarch64 drm/amdgpu: enable ras eeprom support for sienna cichlid drm/amdgpu: fix no bad_pages issue after umc ue injection drm/amdgpu: fix potential memory leak during navi12 deinitialization drm/amd/display: Fix unused variable warning drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO drm/amd/pm: fix the failure when change power profile for renoir drm/amdgpu: fix a GPU hang issue when remove device drm/amdgpu: fix a memory protection fault when remove amdgpu device drm/amdgpu: switched to cached noretry setting for vangogh drm/amd/display: fix sysfs amdgpu_current_backlight_pwm NULL pointer issue drm/amd/pm: updated PM to I2C controller port on sienna cichlid ... | 08 January 2021, 23:12:08 UTC |
2a190b2 | Linus Torvalds | 08 January 2021, 23:06:02 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fixes from Paolo Bonzini: "x86: - Fixes for the new scalable MMU - Fixes for migration of nested hypervisors on AMD - Fix for clang integrated assembler - Fix for left shift by 64 (UBSAN) - Small cleanups - Straggler SEV-ES patch ARM: - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access Misc: - selftests cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits) KVM: x86: __kvm_vcpu_halt can be static KVM: SVM: Add support for booting APs in an SEV-ES guest KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode KVM: nSVM: correctly restore nested_run_pending on migration KVM: x86/mmu: Clarify TDP MMU page list invariants KVM: x86/mmu: Ensure TDP MMU roots are freed after yield kvm: check tlbs_dirty directly KVM: x86: change in pv_eoi_get_pending() to make code more readable MAINTAINERS: Really update email address for Sean Christopherson KVM: x86: fix shift out of bounds reported by UBSAN KVM: selftests: Implement perf_test_util more conventionally KVM: selftests: Use vm_create_with_vcpus in create_vm KVM: selftests: Factor out guest mode code KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte() KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte() ... | 08 January 2021, 23:06:02 UTC |
3e2a590 | Linus Torvalds | 08 January 2021, 22:55:41 UTC | Merge tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull iommu fixes from Will Deacon: "This is mainly all Intel VT-D stuff, but there are some fixes for AMD and ARM as well. We've also got the revert I promised during the merge window, which removes a temporary hack to accomodate i915 while we transitioned the Intel IOMMU driver over to the common DMA-IOMMU API. Finally, there are still a couple of other VT-D fixes floating around, so I expect to send you another batch of fixes next week. Summary: - Fix VT-D TLB invalidation for subdevices - Fix VT-D use-after-free on subdevice detach - Fix VT-D locking so that IRQs are disabled during SVA bind/unbind - Fix VT-D address alignment when flushing IOTLB - Fix memory leak in VT-D IRQ remapping failure path - Revert temporary i915 sglist hack now that it is no longer required - Fix sporadic boot failure with Arm SMMU on Qualcomm SM8150 - Fix NULL dereference in AMD IRQ remapping code with remapping disabled - Fix accidental enabling of irqs on AMD resume-from-suspend path - Fix some typos in comments" * tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: iommu/vt-d: Fix ineffective devTLB invalidation for subdevices iommu/vt-d: Fix general protection fault in aux_detach_device() iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev iommu/arm-smmu-qcom: Initialize SCTLR of the bypass context iommu/vt-d: Fix lockdep splat in sva bind()/unbind() Revert "iommu: Add quirk for Intel graphic devices in map_sg" iommu/vt-d: Fix misuse of ALIGN in qi_flush_piotlb() iommu/amd: Stop irq_remapping_select() matching when remapping is disabled iommu/amd: Set iommu->int_enabled consistently when interrupts are set up iommu/intel: Fix memleak in intel_irq_remapping_alloc iommu/iova: fix 'domain' typos | 08 January 2021, 22:55:41 UTC |
95f0505 | Linus Torvalds | 08 January 2021, 22:13:54 UTC | Merge tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "These are a small number of bug fixes that all came in before or during the merge window, most for the omap platform: - One boot regression fix for Nokia N9 (OMAP3). - Two small defconfig changes for omap2, to reflect changes in drivers - Warning fixes for DT issues on omap2, picoxcell and bitmap SoCs. The picoxcell platform will be removed in v5.12, but fixing it first makes it easier to backport to the fix to stable kernels and get a clean build with new dtc versions" * tag 'arm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: picoxcell: fix missing interrupt-parent properties ARM: dts: ux500/golden: Set display max brightness arm64: dts: bitmain: Use generic "ngpios" rather than "snps,nr-gpios" ARM: omap2: pmic-cpcap: fix maximum voltage to be consistent with defaults on xt875 ARM: omap2plus_defconfig: enable SPI GPIO ARM: OMAP2+: omap_device: fix idling of devices during probe ARM: dts: OMAP3: disable AES on N950/N9 ARM: omap2plus_defconfig: drop unused POWER_AVS option | 08 January 2021, 22:13:54 UTC |
56ef24e | Linus Torvalds | 08 January 2021, 22:11:34 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Clean-ups following the merging window: remove unused variable, duplicate includes, superfluous barrier, move some inline asm to separate functions. - Disable top-byte-ignore on kernel code addresses with KASAN/MTE enabled (already done when MTE is disabled). - Fix ARCH_LOW_ADDRESS_LIMIT definition with CONFIG_ZONE_DMA disabled. - Compiler/linker flags: link with "-z norelno", discard .eh_frame_hdr instead of --no-eh-frame-hdr. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Move PSTATE.TCO setting to separate functions arm64: kasan: Set TCR_EL1.TBID1 when KASAN_HW_TAGS is enabled arm64: vdso: disable .eh_frame_hdr via /DISCARD/ instead of --no-eh-frame-hdr arm64: traps: remove duplicate include statement arm64: link with -z norelro for LLD or aarch64-elf arm64: mm: Fix ARCH_LOW_ADDRESS_LIMIT when !CONFIG_ZONE_DMA arm64: mte: remove an ISB on kernel exit arm64/smp: Remove unused irq variable in arch_show_interrupts() | 08 January 2021, 22:11:34 UTC |
e8deee4 | Vineet Gupta | 08 January 2021, 21:46:55 UTC | ARC: [hsdk]: Enable FPU_SAVE_RESTORE HSDK has hardware floating point and the common use case is with glibc+hf so enable that as default. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> | 08 January 2021, 21:46:58 UTC |
6279d81 | Linus Torvalds | 08 January 2021, 20:12:30 UTC | Merge tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull more networking fixes from Jakub Kicinski: "Slightly lighter pull request to get back into the Thursday cadence. Current release - always broken: - can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions - dsa: hellcreek: fix led_classdev build errors Previous releases - regressions: - ipv6: fib: flush exceptions when purging route to avoid netdev reference leak - ip_tunnels: fix pmtu check in nopmtudisc mode - ip: always refragment ip defragmented packets to avoid MTU issues when forwarding through tunnels, correct "packet too big" message is prohibitively tricky to generate - s390/qeth: fix locking for discipline setup / removal and during recovery to prevent both deadlocks and races - mlx5: Use port_num 1 instead of 0 when delete a RoCE address Previous releases - always broken: - cdc_ncm: correct overhead calculation in delayed_ndp_size to prevent out of bound accesses with Huawei 909s-120 LTE module - fix stmmac dwmac-sun8i suspend/resume: - PHY being left powered off - MAC syscon configuration being reset - reference to the reset controller being improperly dropped - qrtr: fix null-ptr-deref in qrtr_ns_remove - can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver - mlx5e: CT: Use per flow counter when CT flow accounting is enabled - mlx5e: Fix SWP offsets when vlan inserted by driver Misc: - bpf: Fix a task_iter bug caused by a bpf -> net merge conflict resolution And the usual many fixes to various error paths" * tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE s390/qeth: fix L2 header access in qeth_l3_osa_features_check() s390/qeth: fix locking for discipline setup / removal s390/qeth: fix deadlock during recovery selftests: fib_nexthops: Fix wrong mausezahn invocation nexthop: Bounce NHA_GATEWAY in FDB nexthop groups nexthop: Unlink nexthop group entry in error path nexthop: Fix off-by-one error in error path octeontx2-af: fix memory leak of lmac and lmac->name chtls: Fix chtls resources release sequence chtls: Added a check to avoid NULL pointer dereference chtls: Replace skb_dequeue with skb_peek chtls: Avoid unnecessary freeing of oreq pointer chtls: Fix panic when route to peer not configured chtls: Remove invalid set_tcb call chtls: Fix hardware tid leak net: ip: always refragment ip defragmented packets net: fix pmtu check in nopmtudisc mode selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking docs: octeontx2: tune rst markup ... | 08 January 2021, 20:12:30 UTC |
ea1c87c | Linus Torvalds | 08 January 2021, 20:05:11 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a functional bug in arm/chacha-neon as well as a potential buffer overflow in ecdh" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecdh - avoid buffer overflow in ecdh_set_secret() crypto: arm/chacha-neon - add missing counter increment | 08 January 2021, 20:05:11 UTC |
ef0ba05 | Linus Torvalds | 07 January 2021, 17:43:54 UTC | poll: fix performance regression due to out-of-line __put_user() The kernel test robot reported a -5.8% performance regression on the "poll2" test of will-it-scale, and bisected it to commit d55564cfc222 ("x86: Make __put_user() generate an out-of-line call"). I didn't expect an out-of-line __put_user() to matter, because no normal core code should use that non-checking legacy version of user access any more. But I had overlooked the very odd poll() usage, which does a __put_user() to update the 'revents' values of the poll array. Now, Al Viro correctly points out that instead of updating just the 'revents' field, it would be much simpler to just copy the _whole_ pollfd entry, and then we could just use "copy_to_user()" on the whole array of entries, the same way we use "copy_from_user()" a few lines earlier to get the original values. But that is not what we've traditionally done, and I worry that threaded applications might be concurrently modifying the other fields of the pollfd array. So while Al's suggestion is simpler - and perhaps worth trying in the future - this instead keeps the "just update revents" model. To fix the performance regression, use the modern "unsafe_put_user()" instead of __put_user(), with the proper "user_write_access_begin()" guarding in place. This improves code generation enormously. Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Oliver Sang <oliver.sang@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: David Laight <David.Laight@aculab.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2021, 19:06:29 UTC |
a91bd62 | Petr Mladek | 08 January 2021, 11:48:47 UTC | Revert "init/console: Use ttynull as a fallback when there is no console" This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Vineet Gupta <vgupta@synopsys.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2021, 19:02:18 UTC |
24e8ab6 | Rafael J. Wysocki | 08 January 2021, 17:15:44 UTC | Merge branches 'acpi-scan' and 'acpi-misc' * acpi-scan: ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI * acpi-misc: ACPI: Update Kconfig help text for items that are no longer modular | 08 January 2021, 17:15:44 UTC |
84e2615 | David Arcari | 07 January 2021, 14:47:07 UTC | hwmon: (amd_energy) fix allocation of hwmon_channel_info config hwmon, specifically hwmon_num_channel_attrs, expects the config array in the hwmon_channel_info structure to be terminated by a zero entry. amd_energy does not honor this convention. As result, a KASAN warning is possible. Fix this by adding an additional entry and setting it to zero. Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Signed-off-by: David Arcari <darcari@redhat.com> Cc: Naveen Krishna Chatradhi <nchatrad@amd.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: David Arcari <darcari@redhat.com> Acked-by: Naveen Krishna Chatradhi <nchatrad@amd.com> Link: https://lore.kernel.org/r/20210107144707.6927-1-darcari@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 08 January 2021, 15:31:03 UTC |
bac7171 | Arnd Bergmann | 30 December 2020, 15:20:05 UTC | ARM: picoxcell: fix missing interrupt-parent properties dtc points out that the interrupts for some devices are not parsable: picoxcell-pc3x2.dtsi:45.19-49.5: Warning (interrupts_property): /paxi/gem@30000: Missing interrupt-parent picoxcell-pc3x2.dtsi:51.21-55.5: Warning (interrupts_property): /paxi/dmac@40000: Missing interrupt-parent picoxcell-pc3x2.dtsi:57.21-61.5: Warning (interrupts_property): /paxi/dmac@50000: Missing interrupt-parent picoxcell-pc3x2.dtsi:233.21-237.5: Warning (interrupts_property): /rwid-axi/axi2pico@c0000000: Missing interrupt-parent There are two VIC instances, so it's not clear which one needs to be used. I found the BSP sources that reference VIC0, so use that: https://github.com/r1mikey/meta-picoxcell/blob/master/recipes-kernel/linux/linux-picochip-3.0/0001-picoxcell-support-for-Picochip-picoXcell-SoC.patch Acked-by: Jamie Iles <jamie@jamieiles.com> Link: https://lore.kernel.org/r/20201230152010.3914962-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 08 January 2021, 15:23:37 UTC |
02f938e | John Garry | 08 January 2021, 08:55:37 UTC | blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHARED Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives something like: root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3 Add the decoding for that flag. Fixes: 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 08 January 2021, 15:20:27 UTC |
3a21777 | Jack Wang | 08 January 2021, 14:36:34 UTC | block/rnbd-clt: avoid module unload race with close confirmation We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 08 January 2021, 15:19:18 UTC |
ef8048d | Swapnil Ingle | 08 January 2021, 14:36:33 UTC | block/rnbd: Adding name to the Contributors List Adding name to the Contributors List Signed-off-by: Swapnil Ingle <ingleswapnil@gmail.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 08 January 2021, 15:19:18 UTC |
80f9909 | Guoqing Jiang | 08 January 2021, 14:36:32 UTC | block/rnbd-clt: Fix sg table use after free Since dynamically allocate sglist is used for rnbd_iu, we can't free sg table after send_usr_msg since the callback function (cqe.done) could still access the sglist. Otherwise KASAN reports UAF issue: [ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290 [ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0 [ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 4856.601766] Call Trace: [ 4856.601785] <IRQ> [ 4856.601822] dump_stack+0x99/0xcb [ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.601888] print_address_description.constprop.7+0x1e/0x230 [ 4856.601913] ? freeze_kernel_threads+0x73/0x73 [ 4856.601965] ? mark_held_locks+0x29/0xa0 [ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602079] kasan_report.cold.9+0x37/0x7c [ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib] [ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602256] dma_direct_unmap_sg+0x53/0x290 [ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client] [ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client] [ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib] [ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0 [ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0 [ 4856.602647] ? rwlock_bug.part.1+0x60/0x60 [ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client] [ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client] [ 4856.602857] ? check_flags.part.31+0x6c/0x1f0 [ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core] [ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core] [ 4856.603358] irq_poll_softirq+0xe6/0x280 [ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210 [ 4856.603446] __do_softirq+0x10d/0x646 [ 4856.603540] asm_call_irq_on_stack+0x12/0x20 [ 4856.603563] </IRQ> [ 4856.605096] Allocated by task 8914: [ 4856.605510] kasan_save_stack+0x19/0x40 [ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 4856.605552] __kmalloc+0x155/0x320 [ 4856.605574] __sg_alloc_table+0x155/0x1c0 [ 4856.605594] sg_alloc_table+0x1f/0x50 [ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client] [ 4856.605646] remap_devs+0x71/0x210 [rnbd_client] [ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.605728] process_one_work+0x521/0xa90 [ 4856.605748] worker_thread+0x65/0x5b0 [ 4856.605769] kthread+0x1f2/0x210 [ 4856.605789] ret_from_fork+0x22/0x30 [ 4856.606159] Freed by task 8914: [ 4856.606559] kasan_save_stack+0x19/0x40 [ 4856.606580] kasan_set_track+0x1c/0x30 [ 4856.606601] kasan_set_free_info+0x1b/0x30 [ 4856.606622] __kasan_slab_free+0x108/0x150 [ 4856.606642] slab_free_freelist_hook+0x64/0x190 [ 4856.606661] kfree+0xe2/0x650 [ 4856.606681] __sg_free_table+0xa4/0x100 [ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client] [ 4856.606733] remap_devs+0x71/0x210 [rnbd_client] [ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.606813] process_one_work+0x521/0xa90 [ 4856.606833] worker_thread+0x65/0x5b0 [ 4856.606853] kthread+0x1f2/0x210 [ 4856.606872] ret_from_fork+0x22/0x30 The solution is to free iu's sgtable after the iu is not used anymore. And also move sg_alloc_table into rnbd_get_iu accordingly. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 08 January 2021, 15:19:18 UTC |
1a84e7c | Jack Wang | 08 January 2021, 14:36:31 UTC | block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_close KASAN detect following BUG: [ 778.215311] ================================================================== [ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842 [ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 778.220555] Call Trace: [ 778.220609] dump_stack+0x99/0xcb [ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220715] print_address_description.constprop.7+0x1e/0x230 [ 778.220750] ? freeze_kernel_threads+0x73/0x73 [ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220994] kasan_report.cold.9+0x37/0x7c [ 778.221066] ? kobject_put+0x80/0x270 [ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.221304] ? sysfs_file_ops+0x90/0x90 [ 778.221353] kernfs_fop_write+0x141/0x240 [ 778.221451] vfs_write+0x142/0x4d0 [ 778.221553] ksys_write+0xc0/0x160 [ 778.221602] ? __ia32_sys_read+0x50/0x50 [ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210 [ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50 [ 778.221821] do_syscall_64+0x33/0x40 [ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.221896] RIP: 0033:0x7f4affdd9504 [ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504 [ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003 [ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540 [ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520 [ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002 [ 778.222764] Allocated by task 3212: [ 778.223285] kasan_save_stack+0x19/0x40 [ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 778.223347] kmem_cache_alloc_trace+0x186/0x350 [ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server] [ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server] [ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core] [ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 778.223743] process_one_work+0x521/0xa90 [ 778.223773] worker_thread+0x65/0x5b0 [ 778.223802] kthread+0x1f2/0x210 [ 778.223833] ret_from_fork+0x22/0x30 [ 778.224296] Freed by task 8842: [ 778.224800] kasan_save_stack+0x19/0x40 [ 778.224829] kasan_set_track+0x1c/0x30 [ 778.224860] kasan_set_free_info+0x1b/0x30 [ 778.224889] __kasan_slab_free+0x108/0x150 [ 778.224919] slab_free_freelist_hook+0x64/0x190 [ 778.224947] kfree+0xe2/0x650 [ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server] [ 778.225011] kobject_put+0xda/0x270 [ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server] [ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.225111] kernfs_fop_write+0x141/0x240 [ 778.225140] vfs_write+0x142/0x4d0 [ 778.225169] ksys_write+0xc0/0x160 [ 778.225198] do_syscall_64+0x33/0x40 [ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00 which belongs to the cache kmalloc-512 of size 512 [ 778.227464] The buggy address is located 40 bytes inside of 512-byte region [ffff88b1d6516c00, ffff88b1d6516e00) The problem is in the sess_dev release function we call rnbd_destroy_sess_dev, and could free the sess_dev already, but we still set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use after free. To fix it, move the keep_id before the sysfs removal, and cache the rnbd_srv_session for lock accessing, Fixes: 786998050cbc ("block/rnbd-srv: close a mapped device from server side.") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 08 January 2021, 15:19:18 UTC |
74acfa9 | Jack Wang | 08 January 2021, 14:36:30 UTC | block/rnbd: Select SG_POOL for RNBD_CLIENT lkp reboot following build error: drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn': >> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration] 387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT); | ^~~~~~~~~~~~~~~~~~~~~ The reason is CONFIG_SG_POOL is not enabled in the config, to avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 08 January 2021, 15:19:18 UTC |
872f36e | Paolo Bonzini | 08 January 2021, 10:54:44 UTC | KVM: x86: __kvm_vcpu_halt can be static Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 08 January 2021, 10:54:44 UTC |
774206b | Paolo Bonzini | 08 January 2021, 10:02:40 UTC | Merge tag 'kvmarm-fixes-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #1 - VM init cleanups - PSCI relay cleanups - Kill CONFIG_KVM_ARM_PMU - Fixup __init annotations - Fixup reg_to_encoding() - Fix spurious PMCR_EL0 access | 08 January 2021, 10:02:40 UTC |
29f95f2 | Daniel Vetter | 08 January 2021, 09:39:17 UTC | Merge tag 'drm-misc-fixes-2021-01-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes * dma-buf: fix a use-after-free * radeon: don't init the TTM page pool manually * ttm: unexport ttm_pool_{init,fini}() Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/X/gnKs52t8xUuAlE@linux-uq9g | 08 January 2021, 09:39:18 UTC |
25ea8ec | Daniel Vetter | 08 January 2021, 08:53:02 UTC | Merge tag 'drm-msm-fixes-2021-01-07' of https://gitlab.freedesktop.org/drm/msm into drm-fixes A few misc fixes from Rob, mostly fallout from the locking rework that landed in the merge window, plus a few smaller things. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtWMhzyD6kejmViZeZ+zfJxRvfq-R2t_zA+DcDiTxsYRQ@mail.gmail.com | 08 January 2021, 08:53:03 UTC |
a0195f3 | Fenghua Yu | 17 December 2020, 22:31:19 UTC | x86/resctrl: Don't move a task to the same resource group Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com | 08 January 2021, 08:08:03 UTC |
ae28d1a | Fenghua Yu | 17 December 2020, 22:31:18 UTC | x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR Currently, when moving a task to a resource group the PQR_ASSOC MSR is updated with the new closid and rmid in an added task callback. If the task is running, the work is run as soon as possible. If the task is not running, the work is executed later in the kernel exit path when the kernel returns to the task again. Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task is running is the right thing to do. Queueing work for a task that is not running is unnecessary (the PQR_ASSOC MSR is already updated when the task is scheduled in) and causing system resource waste with the way in which it is implemented: Work to update the PQR_ASSOC register is queued every time the user writes a task id to the "tasks" file, even if the task already belongs to the resource group. This could result in multiple pending work items associated with a single task even if they are all identical and even though only a single update with most recent values is needed. Specifically, even if a task is moved between different resource groups while it is sleeping then it is only the last move that is relevant but yet a work item is queued during each move. This unnecessary queueing of work items could result in significant system resource waste, especially on tasks sleeping for a long time. For example, as demonstrated by Shakeel Butt in [1] writing the same task id to the "tasks" file can quickly consume significant memory. The same problem (wasted system resources) occurs when moving a task between different resource groups. As pointed out by Valentin Schneider in [2] there is an additional issue with the way in which the queueing of work is done in that the task_struct update is currently done after the work is queued, resulting in a race with the register update possibly done before the data needed by the update is available. To solve these issues, update the PQR_ASSOC MSR in a synchronous way right after the new closid and rmid are ready during the task movement, only if the task is running. If a moved task is not running nothing is done since the PQR_ASSOC MSR will be updated next time the task is scheduled. This is the same way used to update the register when tasks are moved as part of resource group removal. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ [2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com [ bp: Massage commit message and drop the two update_task_closid_rmid() variants. ] Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt <shakeelb@google.com> Reported-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: James Morse <james.morse@arm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com | 08 January 2021, 08:03:36 UTC |