Revision ad7447b3e726de653f2c77f4db63fb0c383dc555 authored by Francesc Domene on 04 July 2019, 13:50:10 UTC, committed by Néstor Subirón on 09 July 2019, 17:18:46 UTC
1 parent a847f8a
uncrustify.cfg
# Uncrustify-0.67
#
# General options
#
# The type of line endings. Default=Auto.
newlines = auto # auto/lf/crlf/cr
# The original size of tabs in the input. Default=8.
input_tab_size = 2 # unsigned number
# The size of tabs in the output (only used if align_with_tabs=true). Default=8.
output_tab_size = 2 # unsigned number
# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn).
string_escape_char = 92 # unsigned number
# Alternate string escape char for Pawn. Only works right before the quote char.
string_escape_char2 = 0 # unsigned number
# Replace tab characters found in string literals with the escape sequence \t instead.
string_replace_tab_chars = true # false/true
# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
# If True, 'assert(x<0 && y>=3)' will be broken. Default=False
# Improvements to template detection may make this option obsolete.
tok_split_gte = false # false/true
# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.
disable_processing_cmt = "" # string
# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.
enable_processing_cmt = "" # string
# Enable parsing of digraphs. Default=False.
enable_digraphs = false # false/true
# Control what to do with the UTF-8 BOM (recommend 'remove').
utf8_bom = ignore # ignore/add/remove/force
# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8.
utf8_byte = false # false/true
# Force the output encoding to UTF-8.
utf8_force = false # false/true
#
# Spacing options
#
# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
# also '>>>' '<<' '>>' '%' '|'.
sp_arith = add # ignore/add/remove/force
# Add or remove space around arithmetic operator '+' and '-'. Overrides sp_arith
sp_arith_additive = add # ignore/add/remove/force
# Add or remove space around assignment operator '=', '+=', etc.
sp_assign = add # ignore/add/remove/force
# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign.
sp_cpp_lambda_assign = remove # ignore/add/remove/force
# Add or remove space after the capture specification in C++11 lambda.
sp_cpp_lambda_paren = ignore # ignore/add/remove/force
# Add or remove space around assignment operator '=' in a prototype.
sp_assign_default = ignore # ignore/add/remove/force
# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
sp_before_assign = ignore # ignore/add/remove/force
# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
sp_after_assign = ignore # ignore/add/remove/force
# Add or remove space in 'NS_ENUM ('.
sp_enum_paren = ignore # ignore/add/remove/force
# Add or remove space around assignment '=' in enum.
sp_enum_assign = add # ignore/add/remove/force
# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
sp_enum_before_assign = ignore # ignore/add/remove/force
# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
sp_enum_after_assign = ignore # ignore/add/remove/force
# Add or remove space around assignment ':' in enum.
sp_enum_colon = ignore # ignore/add/remove/force
# Add or remove space around preprocessor '##' concatenation operator. Default=Add.
sp_pp_concat = add # ignore/add/remove/force
# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
sp_pp_stringify = add # ignore/add/remove/force
# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
sp_before_pp_stringify = ignore # ignore/add/remove/force
# Add or remove space around boolean operators '&&' and '||'.
sp_bool = force # ignore/add/remove/force
# Add or remove space around compare operator '<', '>', '==', etc.
sp_compare = add # ignore/add/remove/force
# Add or remove space inside '(' and ')'.
sp_inside_paren = remove # ignore/add/remove/force
# Add or remove space between nested parens: '((' vs ') )'.
sp_paren_paren = remove # ignore/add/remove/force
# Add or remove space between back-to-back parens: ')(' vs ') ('.
sp_cparen_oparen = ignore # ignore/add/remove/force
# Whether to balance spaces inside nested parens.
sp_balance_nested_parens = false # false/true
# Add or remove space between ')' and '{'.
sp_paren_brace = force # ignore/add/remove/force
# Add or remove space before pointer star '*'.
sp_before_ptr_star = force # ignore/add/remove/force
# Add or remove space before pointer star '*' that isn't followed by a variable name
# If set to 'ignore', sp_before_ptr_star is used instead.
sp_before_unnamed_ptr_star = force # ignore/add/remove/force
# Add or remove space between pointer stars '*'.
sp_between_ptr_star = remove # ignore/add/remove/force
# Add or remove space after pointer star '*', if followed by a word.
sp_after_ptr_star = remove # ignore/add/remove/force
# Add or remove space after pointer caret '^', if followed by a word.
sp_after_ptr_block_caret = ignore # ignore/add/remove/force
# Add or remove space after pointer star '*', if followed by a qualifier.
sp_after_ptr_star_qualifier = ignore # ignore/add/remove/force
# Add or remove space after a pointer star '*', if followed by a func proto/def.
sp_after_ptr_star_func = ignore # ignore/add/remove/force
# Add or remove space after a pointer star '*', if followed by an open paren (function types).
sp_ptr_star_paren = ignore # ignore/add/remove/force
# Add or remove space before a pointer star '*', if followed by a func proto/def.
sp_before_ptr_star_func = force # ignore/add/remove/force
# Add or remove space before a reference sign '&'.
sp_before_byref = force # ignore/add/remove/force
# Add or remove space before a reference sign '&' that isn't followed by a variable name.
# If set to 'ignore', sp_before_byref is used instead.
sp_before_unnamed_byref = force # ignore/add/remove/force
# Add or remove space after reference sign '&', if followed by a word.
sp_after_byref = remove # ignore/add/remove/force
# Add or remove space after a reference sign '&', if followed by a func proto/def.
sp_after_byref_func = remove # ignore/add/remove/force
# Add or remove space before a reference sign '&', if followed by a func proto/def.
sp_before_byref_func = force # ignore/add/remove/force
# Add or remove space between type and word. Default=Force.
sp_after_type = force # ignore/add/remove/force
# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
sp_before_template_paren = ignore # ignore/add/remove/force
# Add or remove space in 'template <' vs 'template<'.
# If set to ignore, sp_before_angle is used.
sp_template_angle = force # ignore/add/remove/force
# Add or remove space before '<>'.
sp_before_angle = remove # ignore/add/remove/force
# Add or remove space inside '<' and '>'.
sp_inside_angle = remove # ignore/add/remove/force
# Add or remove space between '<>' and ':'.
sp_angle_colon = ignore # ignore/add/remove/force
# Add or remove space after '<>'.
sp_after_angle = ignore # ignore/add/remove/force
# Add or remove space between '<>' and '(' as found in 'new List<byte>(foo);'.
sp_angle_paren = remove # ignore/add/remove/force
# Add or remove space between '<>' and '()' as found in 'new List<byte>();'.
sp_angle_paren_empty = remove # ignore/add/remove/force
# Add or remove space between '<>' and a word as in 'List<byte> m;' or 'template <typename T> static ...'.
sp_angle_word = force # ignore/add/remove/force
# Add or remove space between '>' and '>' in '>>' (template stuff). Default=Add.
sp_angle_shift = remove # ignore/add/remove/force
# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False.
# sp_angle_shift cannot remove the space without this option.
sp_permit_cpp11_shift = true # false/true
# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.
sp_before_sparen = force # ignore/add/remove/force
# Add or remove space inside if-condition '(' and ')'.
sp_inside_sparen = remove # ignore/add/remove/force
# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
sp_inside_sparen_close = ignore # ignore/add/remove/force
# Add or remove space after if-condition '('. Overrides sp_inside_sparen.
sp_inside_sparen_open = ignore # ignore/add/remove/force
# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc.
sp_after_sparen = force # ignore/add/remove/force
# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc.
sp_sparen_brace = force # ignore/add/remove/force
# Add or remove space between 'invariant' and '(' in the D language.
sp_invariant_paren = ignore # ignore/add/remove/force
# Add or remove space after the ')' in 'invariant (C) c' in the D language.
sp_after_invariant_paren = ignore # ignore/add/remove/force
# Add or remove space before empty statement ';' on 'if', 'for' and 'while'.
sp_special_semi = ignore # ignore/add/remove/force
# Add or remove space before ';'. Default=Remove.
sp_before_semi = remove # ignore/add/remove/force
# Add or remove space before ';' in non-empty 'for' statements.
sp_before_semi_for = ignore # ignore/add/remove/force
# Add or remove space before a semicolon of an empty part of a for statement.
sp_before_semi_for_empty = ignore # ignore/add/remove/force
# Add or remove space after ';', except when followed by a comment. Default=Add.
sp_after_semi = add # ignore/add/remove/force
# Add or remove space after ';' in non-empty 'for' statements. Default=Force.
sp_after_semi_for = force # ignore/add/remove/force
# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
sp_after_semi_for_empty = ignore # ignore/add/remove/force
# Add or remove space before '[' (except '[]').
sp_before_square = remove # ignore/add/remove/force
# Add or remove space before '[]'.
sp_before_squares = remove # ignore/add/remove/force
# Add or remove space before structured bindings. Only for C++17.
sp_cpp_before_struct_binding = ignore # ignore/add/remove/force
# Add or remove space inside a non-empty '[' and ']'.
sp_inside_square = remove # ignore/add/remove/force
# Add or remove space inside a non-empty OC boxed array '@[' and ']'.
# If set to ignore, sp_inside_square is used.
sp_inside_square_oc_array = ignore # ignore/add/remove/force
# Add or remove space after ',', 'a,b' vs 'a, b'.
sp_after_comma = add # ignore/add/remove/force
# Add or remove space before ','. Default=Remove.
sp_before_comma = remove # ignore/add/remove/force
# Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'. Only for C#.
sp_after_mdatype_commas = ignore # ignore/add/remove/force
# Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'. Only for C#.
sp_before_mdatype_commas = ignore # ignore/add/remove/force
# Add or remove space between ',' in multidimensional array type 'int[,,]'. Only for C#.
sp_between_mdatype_commas = ignore # ignore/add/remove/force
# Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force.
sp_paren_comma = force # ignore/add/remove/force
# Add or remove space before the variadic '...' when preceded by a non-punctuator.
sp_before_ellipsis = ignore # ignore/add/remove/force
# Add or remove space after class ':'.
sp_after_class_colon = ignore # ignore/add/remove/force
# Add or remove space before class ':'.
sp_before_class_colon = ignore # ignore/add/remove/force
# Add or remove space after class constructor ':'.
sp_after_constr_colon = ignore # ignore/add/remove/force
# Add or remove space before class constructor ':'.
sp_before_constr_colon = ignore # ignore/add/remove/force
# Add or remove space before case ':'. Default=Remove.
sp_before_case_colon = remove # ignore/add/remove/force
# Add or remove space between 'operator' and operator sign.
sp_after_operator = remove # ignore/add/remove/force
# Add or remove space between the operator symbol and the open paren, as in 'operator ++('.
sp_after_operator_sym = remove # ignore/add/remove/force
# Overrides sp_after_operator_sym when the operator has no arguments, as in 'operator *()'.
sp_after_operator_sym_empty = ignore # ignore/add/remove/force
# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'.
sp_after_cast = force # ignore/add/remove/force
# Add or remove spaces inside cast parens.
sp_inside_paren_cast = remove # ignore/add/remove/force
# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'.
sp_cpp_cast_paren = remove # ignore/add/remove/force
# Add or remove space between 'sizeof' and '('.
sp_sizeof_paren = remove # ignore/add/remove/force
# Add or remove space after the tag keyword (Pawn).
sp_after_tag = ignore # ignore/add/remove/force
# Add or remove space inside enum '{' and '}'.
sp_inside_braces_enum = force # ignore/add/remove/force
# Add or remove space inside struct/union '{' and '}'.
sp_inside_braces_struct = force # ignore/add/remove/force
# Add or remove space inside OC boxed dictionary @'{' and '}'
sp_inside_braces_oc_dict = ignore # ignore/add/remove/force
# Add or remove space after open brace in an unnamed temporary direct-list-initialization.
sp_after_type_brace_init_lst_open = ignore # ignore/add/remove/force
# Add or remove space before close brace in an unnamed temporary direct-list-initialization.
sp_before_type_brace_init_lst_close = ignore # ignore/add/remove/force
# Add or remove space inside an unnamed temporary direct-list-initialization.
sp_inside_type_brace_init_lst = ignore # ignore/add/remove/force
# Add or remove space inside '{' and '}'.
sp_inside_braces = ignore # ignore/add/remove/force
# Add or remove space inside '{}'.
sp_inside_braces_empty = remove # ignore/add/remove/force
# Add or remove space between return type and function name
# A minimum of 1 is forced except for pointer return types.
sp_type_func = force # ignore/add/remove/force
# Add or remove space between type and open brace of an unnamed temporary direct-list-initialization.
sp_type_brace_init_lst = ignore # ignore/add/remove/force
# Add or remove space between function name and '(' on function declaration.
sp_func_proto_paren = remove # ignore/add/remove/force
# Add or remove space between function name and '()' on function declaration without parameters.
sp_func_proto_paren_empty = remove # ignore/add/remove/force
# Add or remove space between function name and '(' on function definition.
sp_func_def_paren = remove # ignore/add/remove/force
# Add or remove space between function name and '()' on function definition without parameters.
sp_func_def_paren_empty = remove # ignore/add/remove/force
# Add or remove space inside empty function '()'.
sp_inside_fparens = remove # ignore/add/remove/force
# Add or remove space inside function '(' and ')'.
sp_inside_fparen = remove # ignore/add/remove/force
# Add or remove space inside the first parens in the function type: 'void (*x)(...)'.
sp_inside_tparen = ignore # ignore/add/remove/force
# Add or remove between the parens in the function type: 'void (*x)(...)'.
sp_after_tparen_close = ignore # ignore/add/remove/force
# Add or remove space between ']' and '(' when part of a function call.
sp_square_fparen = remove # ignore/add/remove/force
# Add or remove space between ')' and '{' of function.
sp_fparen_brace = force # ignore/add/remove/force
# Add or remove space between ')' and '{' of function call in object initialization. Overrides sp_fparen_brace.
sp_fparen_brace_initializer = ignore # ignore/add/remove/force
# Java: Add or remove space between ')' and '{{' of double brace initializer.
sp_fparen_dbrace = ignore # ignore/add/remove/force
# Add or remove space between function name and '(' on function calls.
sp_func_call_paren = remove # ignore/add/remove/force
# Add or remove space between function name and '()' on function calls without parameters.
# If set to 'ignore' (the default), sp_func_call_paren is used.
sp_func_call_paren_empty = ignore # ignore/add/remove/force
# Add or remove space between the user function name and '(' on function calls
# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
sp_func_call_user_paren = ignore # ignore/add/remove/force
# Add or remove space inside user function '(' and ')'
# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
sp_func_call_user_inside_fparen = ignore # ignore/add/remove/force
# Add or remove space between nested parens with user functions: '((' vs ') )'You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
sp_func_call_user_paren_paren = ignore # ignore/add/remove/force
# Add or remove space between a constructor/destructor and the open paren.
sp_func_class_paren = remove # ignore/add/remove/force
# Add or remove space between a constructor without parameters or destructor and '()'.
sp_func_class_paren_empty = remove # ignore/add/remove/force
# Add or remove space between 'return' and '('.
sp_return_paren = force # ignore/add/remove/force
# Add or remove space between '__attribute__' and '('.
sp_attribute_paren = remove # ignore/add/remove/force
# Add or remove space between 'defined' and '(' in '#if defined (FOO)'.
sp_defined_paren = remove # ignore/add/remove/force
# Add or remove space between 'throw' and '(' in 'throw (something)'.
sp_throw_paren = ignore # ignore/add/remove/force
# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'.
sp_after_throw = ignore # ignore/add/remove/force
# Add or remove space between 'catch' and '(' in 'catch (something) { }'
# If set to ignore, sp_before_sparen is used.
sp_catch_paren = force # ignore/add/remove/force
# Add or remove space between '@catch' and '(' in '@catch (something) { }'
# If set to ignore, sp_catch_paren is used.
sp_oc_catch_paren = ignore # ignore/add/remove/force
# Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
# If set to ignore, sp_before_sparen is used.
sp_version_paren = ignore # ignore/add/remove/force
# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
# If set to ignore, sp_before_sparen is used.
sp_scope_paren = ignore # ignore/add/remove/force
# Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove.
sp_super_paren = remove # ignore/add/remove/force
# Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove.
sp_this_paren = remove # ignore/add/remove/force
# Add or remove space between macro and value.
sp_macro = force # ignore/add/remove/force
# Add or remove space between macro function ')' and value.
sp_macro_func = force # ignore/add/remove/force
# Add or remove space between 'else' and '{' if on the same line.
sp_else_brace = force # ignore/add/remove/force
# Add or remove space between '}' and 'else' if on the same line.
sp_brace_else = force # ignore/add/remove/force
# Add or remove space between '}' and the name of a typedef on the same line.
sp_brace_typedef = force # ignore/add/remove/force
# Add or remove space between 'catch' and '{' if on the same line.
sp_catch_brace = force # ignore/add/remove/force
# Add or remove space between '@catch' and '{' if on the same line.
# If set to ignore, sp_catch_brace is used.
sp_oc_catch_brace = force # ignore/add/remove/force
# Add or remove space between '}' and 'catch' if on the same line.
sp_brace_catch = force # ignore/add/remove/force
# Add or remove space between '}' and '@catch' if on the same line.
# If set to ignore, sp_brace_catch is used.
sp_oc_brace_catch = force # ignore/add/remove/force
# Add or remove space between 'finally' and '{' if on the same line.
sp_finally_brace = force # ignore/add/remove/force
# Add or remove space between '}' and 'finally' if on the same line.
sp_brace_finally = force # ignore/add/remove/force
# Add or remove space between 'try' and '{' if on the same line.
sp_try_brace = force # ignore/add/remove/force
# Add or remove space between get/set and '{' if on the same line.
sp_getset_brace = force # ignore/add/remove/force
# Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add.
sp_word_brace = add # ignore/add/remove/force
# Add or remove space between a variable and '{' for a namespace. Default=Add.
sp_word_brace_ns = add # ignore/add/remove/force
# Add or remove space before the '::' operator.
sp_before_dc = remove # ignore/add/remove/force
# Add or remove space after the '::' operator.
sp_after_dc = remove # ignore/add/remove/force
# Add or remove around the D named array initializer ':' operator.
sp_d_array_colon = ignore # ignore/add/remove/force
# Add or remove space after the '!' (not) operator. Default=Remove.
sp_not = remove # ignore/add/remove/force
# Add or remove space after the '~' (invert) operator. Default=Remove.
sp_inv = remove # ignore/add/remove/force
# Add or remove space after the '&' (address-of) operator. Default=Remove
# This does not affect the spacing after a '&' that is part of a type.
sp_addr = remove # ignore/add/remove/force
# Add or remove space around the '.' or '->' operators. Default=Remove.
sp_member = remove # ignore/add/remove/force
# Add or remove space after the '*' (dereference) operator. Default=Remove
# This does not affect the spacing after a '*' that is part of a type.
sp_deref = remove # ignore/add/remove/force
# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove.
sp_sign = remove # ignore/add/remove/force
# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove.
sp_incdec = remove # ignore/add/remove/force
# Add or remove space before a backslash-newline at the end of a line. Default=Add.
sp_before_nl_cont = force # ignore/add/remove/force
# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'.
sp_after_oc_scope = remove # ignore/add/remove/force
# Add or remove space after the colon in message specs
# '-(int) f:(int) x;' vs '-(int) f: (int) x;'.
sp_after_oc_colon = force # ignore/add/remove/force
# Add or remove space before the colon in message specs
# '-(int) f: (int) x;' vs '-(int) f : (int) x;'.
sp_before_oc_colon = remove # ignore/add/remove/force
# Add or remove space after the colon in immutable dictionary expression
# 'NSDictionary *test = @{@"foo" :@"bar"};'.
sp_after_oc_dict_colon = ignore # ignore/add/remove/force
# Add or remove space before the colon in immutable dictionary expression
# 'NSDictionary *test = @{@"foo" :@"bar"};'.
sp_before_oc_dict_colon = ignore # ignore/add/remove/force
# Add or remove space after the colon in message specs
# '[object setValue:1];' vs '[object setValue: 1];'.
sp_after_send_oc_colon = ignore # ignore/add/remove/force
# Add or remove space before the colon in message specs
# '[object setValue:1];' vs '[object setValue :1];'.
sp_before_send_oc_colon = ignore # ignore/add/remove/force
# Add or remove space after the (type) in message specs
# '-(int)f: (int) x;' vs '-(int)f: (int)x;'.
sp_after_oc_type = ignore # ignore/add/remove/force
# Add or remove space after the first (type) in message specs
# '-(int) f:(int)x;' vs '-(int)f:(int)x;'.
sp_after_oc_return_type = ignore # ignore/add/remove/force
# Add or remove space between '@selector' and '('
# '@selector(msgName)' vs '@selector (msgName)'
# Also applies to @protocol() constructs.
sp_after_oc_at_sel = ignore # ignore/add/remove/force
# Add or remove space between '@selector(x)' and the following word
# '@selector(foo) a:' vs '@selector(foo)a:'.
sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force
# Add or remove space inside '@selector' parens
# '@selector(foo)' vs '@selector( foo )'
# Also applies to @protocol() constructs.
sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force
# Add or remove space before a block pointer caret
# '^int (int arg){...}' vs. ' ^int (int arg){...}'.
sp_before_oc_block_caret = ignore # ignore/add/remove/force
# Add or remove space after a block pointer caret
# '^int (int arg){...}' vs. '^ int (int arg){...}'.
sp_after_oc_block_caret = ignore # ignore/add/remove/force
# Add or remove space between the receiver and selector in a message.
# '[receiver selector ...]'.
sp_after_oc_msg_receiver = ignore # ignore/add/remove/force
# Add or remove space after @property.
sp_after_oc_property = ignore # ignore/add/remove/force
# Add or remove space between '@synchronized' and the parenthesis
# '@synchronized(foo)' vs '@synchronized (foo)'.
sp_after_oc_synchronized = ignore # ignore/add/remove/force
# Add or remove space around the ':' in 'b ? t : f'.
sp_cond_colon = force # ignore/add/remove/force
# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.
sp_cond_colon_before = ignore # ignore/add/remove/force
# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.
sp_cond_colon_after = ignore # ignore/add/remove/force
# Add or remove space around the '?' in 'b ? t : f'.
sp_cond_question = force # ignore/add/remove/force
# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.
sp_cond_question_before = ignore # ignore/add/remove/force
# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.
sp_cond_question_after = ignore # ignore/add/remove/force
# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.
sp_cond_ternary_short = ignore # ignore/add/remove/force
# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
sp_case_label = force # ignore/add/remove/force
# Control the space around the D '..' operator.
sp_range = ignore # ignore/add/remove/force
# Control the spacing after ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
sp_after_for_colon = ignore # ignore/add/remove/force
# Control the spacing before ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
sp_before_for_colon = ignore # ignore/add/remove/force
# Control the spacing in 'extern (C)' (D).
sp_extern_paren = ignore # ignore/add/remove/force
# Control the space after the opening of a C++ comment '// A' vs '//A'.
sp_cmt_cpp_start = add # ignore/add/remove/force
# True: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.
sp_cmt_cpp_doxygen = true # false/true
# True: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'.
sp_cmt_cpp_qttr = false # false/true
# Controls the spaces between #else or #endif and a trailing comment.
sp_endif_cmt = ignore # ignore/add/remove/force
# Controls the spaces after 'new', 'delete' and 'delete[]'.
sp_after_new = force # ignore/add/remove/force
# Controls the spaces between new and '(' in 'new()'.
sp_between_new_paren = remove # ignore/add/remove/force
# Controls the spaces between ')' and 'type' in 'new(foo) BAR'.
sp_after_newop_paren = ignore # ignore/add/remove/force
# Controls the spaces inside paren of the new operator: 'new(foo) BAR'.
sp_inside_newop_paren = ignore # ignore/add/remove/force
# Controls the space after open paren of the new operator: 'new(foo) BAR'.
# Overrides sp_inside_newop_paren.
sp_inside_newop_paren_open = ignore # ignore/add/remove/force
# Controls the space before close paren of the new operator: 'new(foo) BAR'.
# Overrides sp_inside_newop_paren.
sp_inside_newop_paren_close = ignore # ignore/add/remove/force
# Controls the spaces before a trailing or embedded comment.
sp_before_tr_emb_cmt = add # ignore/add/remove/force
# Number of spaces before a trailing or embedded comment.
sp_num_before_tr_emb_cmt = 0 # unsigned number
# Control space between a Java annotation and the open paren.
sp_annotation_paren = ignore # ignore/add/remove/force
# If True, vbrace tokens are dropped to the previous token and skipped.
sp_skip_vbrace_tokens = false # false/true
# Controls the space after 'noexcept'.
sp_after_noexcept = force # ignore/add/remove/force
# If True, a <TAB> is inserted after #define.
force_tab_after_define = false # false/true
#
# Indenting
#
# The number of columns to indent per level.
# Usually 2, 3, 4, or 8. Default=8.
indent_columns = 2 # unsigned number
# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level.
indent_continue = 4 # number
# Indent empty lines - lines which contain only spaces before newline character
indent_single_newlines = false # false/true
# The continuation indent for func_*_param if they are true.
# If non-zero, this overrides the indent.
indent_param = 0 # unsigned number
# How to use tabs when indenting code
# 0=spaces only
# 1=indent with tabs to brace level, align with spaces (default)
# 2=indent and align with tabs, using spaces when not on a tabstop
indent_with_tabs = 0 # unsigned number
# Comments that are not a brace level are indented with tabs on a tabstop.
# Requires indent_with_tabs=2. If false, will use spaces.
indent_cmt_with_tabs = false # false/true
# Whether to indent strings broken by '\' so that they line up.
indent_align_string = true # false/true
# The number of spaces to indent multi-line XML strings.
# Requires indent_align_string=True.
indent_xml_string = 0 # unsigned number
# Spaces to indent '{' from level.
indent_brace = 0 # unsigned number
# Whether braces are indented to the body level.
indent_braces = false # false/true
# Disabled indenting function braces if indent_braces is True.
indent_braces_no_func = false # false/true
# Disabled indenting class braces if indent_braces is True.
indent_braces_no_class = false # false/true
# Disabled indenting struct braces if indent_braces is True.
indent_braces_no_struct = false # false/true
# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
indent_brace_parent = false # false/true
# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.
indent_paren_open_brace = false # false/true
# indent a C# delegate by another level, default is to not indent by another level.
indent_cs_delegate_brace = false # false/true
# indent a C# delegate(To hanndle delegates with no brace) by another level. default: false
indent_cs_delegate_body = false # false/true
# Whether the 'namespace' body is indented.
indent_namespace = true # false/true
# Only indent one namespace and no sub-namespaces.
# Requires indent_namespace=True.
indent_namespace_single_indent = true # false/true
# The number of spaces to indent a namespace block.
indent_namespace_level = 2 # unsigned number
# If the body of the namespace is longer than this number, it won't be indented.
# Requires indent_namespace=True. Default=0 (no limit)
indent_namespace_limit = 0 # unsigned number
# Whether the 'extern "C"' body is indented.
indent_extern = true # false/true
# Whether the 'class' body is indented.
indent_class = true # false/true
# Whether to indent the stuff after a leading base class colon.
indent_class_colon = true # false/true
# Indent based on a class colon instead of the stuff after the colon.
# Requires indent_class_colon=True. Default=False.
indent_class_on_colon = false # false/true
# Whether to indent the stuff after a leading class initializer colon.
indent_constr_colon = true # false/true
# Virtual indent from the ':' for member initializers. Default=2.
indent_ctor_init_leading = 2 # unsigned number
# Additional indent for constructor initializer list.
# Negative values decrease indent down to the first column. Default=0.
indent_ctor_init = 0 # number
# False=treat 'else\nif' as 'else if' for indenting purposes
# True=indent the 'if' one level.
indent_else_if = false # false/true
# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute.
indent_var_def_blk = 0 # number
# Indent continued variable declarations instead of aligning.
indent_var_def_cont = false # false/true
# Indent continued shift expressions ('<<' and '>>') instead of aligning.
# Turn align_left_shift off when enabling this.
indent_shift = false # false/true
# True: force indentation of function definition to start in column 1
# False: use the default behavior.
indent_func_def_force_col1 = false # false/true
# True: indent continued function call parameters one indent level
# False: align parameters under the open paren.
indent_func_call_param = true # false/true
# Same as indent_func_call_param, but for function defs.
indent_func_def_param = true # false/true
# Same as indent_func_call_param, but for function protos.
indent_func_proto_param = true # false/true
# Same as indent_func_call_param, but for class declarations.
indent_func_class_param = true # false/true
# Same as indent_func_call_param, but for class variable constructors.
indent_func_ctor_var_param = true # false/true
# Same as indent_func_call_param, but for templates.
indent_template_param = true # false/true
# Double the indent for indent_func_xxx_param options.
# Use both values of the options indent_columns and indent_param.
indent_func_param_double = true # false/true
# Indentation column for standalone 'const' function decl/proto qualifier.
indent_func_const = 0 # unsigned number
# Indentation column for standalone 'throw' function decl/proto qualifier.
indent_func_throw = 0 # unsigned number
# The number of spaces to indent a continued '->' or '.'
# Usually set to 0, 1, or indent_columns.
indent_member = 4 # unsigned number
# setting to true will indent lines broken at '.' or '->' by a single indent
# UO_indent_member option will not be effective if this is set to true.
indent_member_single = false # false/true
# Spaces to indent single line ('//') comments on lines before code.
indent_sing_line_comments = 0 # unsigned number
# If set, will indent trailing single line ('//') comments relative
# to the code instead of trying to keep the same absolute column.
indent_relative_single_line_comments = false # false/true
# Spaces to indent 'case' from 'switch'
# Usually 0 or indent_columns.
indent_switch_case = 2 # unsigned number
# Whether to indent preprocessor statements inside of switch statements.
indent_switch_pp = true # false/true
# Spaces to shift the 'case' line, without affecting any other lines
# Usually 0.
indent_case_shift = 0 # unsigned number
# Spaces to indent '{' from 'case'.
# By default, the brace will appear under the 'c' in case.
# Usually set to 0 or indent_columns.
# negative value are OK.
indent_case_brace = 0 # number
# Whether to indent comments found in first column.
indent_col1_comment = false # false/true
# How to indent goto labels
# >0: absolute column where 1 is the leftmost column
# <=0: subtract from brace indent
# Default=1
indent_label = 1 # number
# Same as indent_label, but for access specifiers that are followed by a colon. Default=1
indent_access_spec = 3 # number
# Indent the code after an access specifier by one level.
# If set, this option forces 'indent_access_spec=0'.
indent_access_spec_body = false # false/true
# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended).
indent_paren_nl = false # false/true
# Controls the indent of a close paren after a newline.
# 0: Indent to body level
# 1: Align under the open paren
# 2: Indent to the brace level
indent_paren_close = 0 # unsigned number
# Controls the indent of the open paren of a function definition, if on it's own line.If True, indents the open paren
indent_paren_after_func_def = false # false/true
# Controls the indent of the open paren of a function declaration, if on it's own line.If True, indents the open paren
indent_paren_after_func_decl = false # false/true
# Controls the indent of the open paren of a function call, if on it's own line.If True, indents the open paren
indent_paren_after_func_call = false # false/true
# Controls the indent of a comma when inside a paren.If True, aligns under the open paren.
indent_comma_paren = false # false/true
# Controls the indent of a BOOL operator when inside a paren.If True, aligns under the open paren.
indent_bool_paren = false # false/true
# Controls the indent of a semicolon when inside a for paren.If True, aligns under the open for paren.
indent_semicolon_for_paren = false # false/true
# If 'indent_bool_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
indent_first_bool_expr = false # false/true
# If 'indent_semicolon_for_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
indent_first_for_expr = false # false/true
# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended).
indent_square_nl = false # false/true
# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies.
indent_preserve_sql = false # false/true
# Align continued statements at the '='. Default=True
# If False or the '=' is followed by a newline, the next line is indent one tab.
indent_align_assign = false # false/true
# Align continued statements at the '('. Default=True
# If FALSE or the '(' is not followed by a newline, the next line indent is one tab.
indent_align_paren = true # false/true
# Indent OC blocks at brace level instead of usual rules.
indent_oc_block = false # false/true
# Indent OC blocks in a message relative to the parameter name.
# 0=use indent_oc_block rules, 1+=spaces to indent
indent_oc_block_msg = 0 # unsigned number
# Minimum indent for subsequent parameters
indent_oc_msg_colon = 0 # unsigned number
# If True, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
# Default=True.
indent_oc_msg_prioritize_first_colon = true # false/true
# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).
indent_oc_block_msg_xcode_style = false # false/true
# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.
indent_oc_block_msg_from_keyword = false # false/true
# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.
indent_oc_block_msg_from_colon = false # false/true
# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.
indent_oc_block_msg_from_caret = false # false/true
# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.
indent_oc_block_msg_from_brace = false # false/true
# When indenting after virtual brace open and newline add further spaces to reach this min. indent.
indent_min_vbrace_open = 0 # unsigned number
# True: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.
indent_vbrace_open_on_tabstop = false # false/true
# If True, a brace followed by another token (not a newline) will indent all contained lines to match the token.Default=True.
indent_token_after_brace = true # false/true
# If True, cpp lambda body will be indentedDefault=False.
indent_cpp_lambda_body = false # false/true
# indent (or not) an using block if no braces are used. Only for C#.Default=True.
indent_using_block = true # false/true
# indent the continuation of ternary operator.
# 0: (Default) off
# 1: When the `if_false` is a continuation, indent it under `if_false`
# 2: When the `:` is a continuation, indent it under `?`
indent_ternary_operator = 0 # unsigned number
# If true, the indentation of the chunks after a `return new` sequence will be set at return indentation column.
indent_off_after_return_new = false # false/true
# If true, the tokens after return are indented with regular single indentation.By default (false) the indentation is after the return token.
indent_single_after_return = false # false/true
# If true, ignore indent and align for asm blocks as they have their own indentation.
indent_ignore_asm_block = false # false/true
#
# Newline adding and removing options
#
# Whether to collapse empty blocks between '{' and '}'.
nl_collapse_empty_body = true # false/true
# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'.
nl_assign_leave_one_liners = true # false/true
# Don't split one-line braced statements inside a class xx { } body.
nl_class_leave_one_liners = false # false/true
# Don't split one-line enums: 'enum foo { BAR = 15 };'
nl_enum_leave_one_liners = false # false/true
# Don't split one-line get or set functions.
nl_getset_leave_one_liners = false # false/true
# Don't split one-line get or set functions.
nl_cs_property_leave_one_liners = false # false/true
# Don't split one-line function definitions - 'int foo() { return 0; }'.
nl_func_leave_one_liners = false # false/true
# Don't split one-line C++11 lambdas - '[]() { return 0; }'.
nl_cpp_lambda_leave_one_liners = true # false/true
# Don't split one-line if/else statements - 'if(a) b++;'.
nl_if_leave_one_liners = false # false/true
# Don't split one-line while statements - 'while(a) b++;'.
nl_while_leave_one_liners = false # false/true
# Don't split one-line OC messages.
nl_oc_msg_leave_one_liner = false # false/true
# Add or remove newline between Objective-C block signature and '{'.
nl_oc_block_brace = ignore # ignore/add/remove/force
# Add or remove newline between @interface and '{'.
nl_oc_interface_brace = ignore # ignore/add/remove/force
# Add or remove newline between @implementation and '{'.
nl_oc_implementation_brace = ignore # ignore/add/remove/force
# Add or remove newlines at the start of the file.
nl_start_of_file = remove # ignore/add/remove/force
# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'.
nl_start_of_file_min = 0 # unsigned number
# Add or remove newline at the end of the file.
nl_end_of_file = force # ignore/add/remove/force
# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force').
nl_end_of_file_min = 1 # unsigned number
# Add or remove newline between '=' and '{'.
nl_assign_brace = ignore # ignore/add/remove/force
# Add or remove newline between '=' and '[' (D only).
nl_assign_square = ignore # ignore/add/remove/force
# Add or remove newline between '[]' and '{'.
nl_tsquare_brace = ignore # ignore/add/remove/force
# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'.
nl_after_square_assign = ignore # ignore/add/remove/force
# The number of blank lines after a block of variable definitions at the top of a function body
# 0 = No change (default).
nl_func_var_def_blk = 0 # unsigned number
# The number of newlines before a block of typedefs
# 0 = No change (default)
# is overridden by the option 'nl_after_access_spec'.
nl_typedef_blk_start = 0 # unsigned number
# The number of newlines after a block of typedefs
# 0 = No change (default).
nl_typedef_blk_end = 0 # unsigned number
# The maximum consecutive newlines within a block of typedefs
# 0 = No change (default).
nl_typedef_blk_in = 0 # unsigned number
# The number of newlines before a block of variable definitions not at the top of a function body
# 0 = No change (default)
# is overridden by the option 'nl_after_access_spec'.
nl_var_def_blk_start = 0 # unsigned number
# The number of newlines after a block of variable definitions not at the top of a function body
# 0 = No change (default).
nl_var_def_blk_end = 0 # unsigned number
# The maximum consecutive newlines within a block of variable definitions
# 0 = No change (default).
nl_var_def_blk_in = 0 # unsigned number
# Add or remove newline between a function call's ')' and '{', as in:
# list_for_each(item, &list) { }.
nl_fcall_brace = remove # ignore/add/remove/force
# Add or remove newline between 'enum' and '{'.
nl_enum_brace = remove # ignore/add/remove/force
# Add or remove newline between 'enum' and 'class'.
nl_enum_class = remove # ignore/add/remove/force
# Add or remove newline between 'enum class' and the identifier.
nl_enum_class_identifier = remove # ignore/add/remove/force
# Add or remove newline between 'enum class' type and ':'.
nl_enum_identifier_colon = remove # ignore/add/remove/force
# Add or remove newline between 'enum class identifier :' and 'type' and/or 'type'.
nl_enum_colon_type = remove # ignore/add/remove/force
# Add or remove newline between 'struct and '{'.
nl_struct_brace = remove # ignore/add/remove/force
# Add or remove newline between 'union' and '{'.
nl_union_brace = remove # ignore/add/remove/force
# Add or remove newline between 'if' and '{'.
nl_if_brace = remove # ignore/add/remove/force
# Add or remove newline between '}' and 'else'.
nl_brace_else = remove # ignore/add/remove/force
# Add or remove newline between 'else if' and '{'
# If set to ignore, nl_if_brace is used instead.
nl_elseif_brace = remove # ignore/add/remove/force
# Add or remove newline between 'else' and '{'.
nl_else_brace = remove # ignore/add/remove/force
# Add or remove newline between 'else' and 'if'.
nl_else_if = remove # ignore/add/remove/force
# Add or remove newline before 'if'/'else if' closing parenthesis.
nl_before_if_closing_paren = remove # ignore/add/remove/force
# Add or remove newline between '}' and 'finally'.
nl_brace_finally = remove # ignore/add/remove/force
# Add or remove newline between 'finally' and '{'.
nl_finally_brace = remove # ignore/add/remove/force
# Add or remove newline between 'try' and '{'.
nl_try_brace = remove # ignore/add/remove/force
# Add or remove newline between get/set and '{'.
nl_getset_brace = remove # ignore/add/remove/force
# Add or remove newline between 'for' and '{'.
nl_for_brace = remove # ignore/add/remove/force
# Add or remove newline between 'catch' and '{'.
nl_catch_brace = remove # ignore/add/remove/force
# Add or remove newline between '@catch' and '{'.
# If set to ignore, nl_catch_brace is used.
nl_oc_catch_brace = remove # ignore/add/remove/force
# Add or remove newline between '}' and 'catch'.
nl_brace_catch = remove # ignore/add/remove/force
# Add or remove newline between '}' and 'catch'.
# If set to ignore, nl_brace_catch is used.
nl_oc_brace_catch = remove # ignore/add/remove/force
# Add or remove newline between '}' and ']'.
nl_brace_square = remove # ignore/add/remove/force
# Add or remove newline between '}' and ')' in a function invocation.
nl_brace_fparen = remove # ignore/add/remove/force
# Add or remove newline between 'while' and '{'.
nl_while_brace = remove # ignore/add/remove/force
# Add or remove newline between 'scope (x)' and '{' (D).
nl_scope_brace = remove # ignore/add/remove/force
# Add or remove newline between 'unittest' and '{' (D).
nl_unittest_brace = remove # ignore/add/remove/force
# Add or remove newline between 'version (x)' and '{' (D).
nl_version_brace = remove # ignore/add/remove/force
# Add or remove newline between 'using' and '{'.
nl_using_brace = remove # ignore/add/remove/force
# Add or remove newline between two open or close braces.
# Due to general newline/brace handling, REMOVE may not work.
nl_brace_brace = ignore # ignore/add/remove/force
# Add or remove newline between 'do' and '{'.
nl_do_brace = remove # ignore/add/remove/force
# Add or remove newline between '}' and 'while' of 'do' statement.
nl_brace_while = remove # ignore/add/remove/force
# Add or remove newline between 'switch' and '{'.
nl_switch_brace = remove # ignore/add/remove/force
# Add or remove newline between 'synchronized' and '{'.
nl_synchronized_brace = remove # ignore/add/remove/force
# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace.
nl_multi_line_cond = false # false/true
# Force a newline in a define after the macro name for multi-line defines.
nl_multi_line_define = false # false/true
# Whether to put a newline before 'case' statement, not after the first 'case'.
nl_before_case = false # false/true
# Add or remove newline between ')' and 'throw'.
nl_before_throw = ignore # ignore/add/remove/force
# Whether to put a newline after 'case' statement.
nl_after_case = false # false/true
# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
nl_case_colon_brace = remove # ignore/add/remove/force
# Newline between namespace and {.
nl_namespace_brace = remove # ignore/add/remove/force
# Add or remove newline between 'template<>' and whatever follows.
nl_template_class = ignore # ignore/add/remove/force
# Add or remove newline between 'class' and '{'.
nl_class_brace = remove # ignore/add/remove/force
# Add or remove newline before/after each ',' in the base class list,
# (tied to pos_class_comma).
nl_class_init_args = add # ignore/add/remove/force
# Add or remove newline after each ',' in the constructor member initialization.
# Related to nl_constr_colon, pos_constr_colon and pos_constr_comma.
nl_constr_init_args = add # ignore/add/remove/force
# Add or remove newline before first element, after comma, and after last element in enum.
nl_enum_own_lines = add # ignore/add/remove/force
# Add or remove newline between return type and function name in a function definition.
nl_func_type_name = ignore # ignore/add/remove/force
# Add or remove newline between return type and function name inside a class {}
# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
nl_func_type_name_class = ignore # ignore/add/remove/force
# Add or remove newline between class specification and '::' in 'void A::f() { }'
# Only appears in separate member implementation (does not appear with in-line implmementation).
nl_func_class_scope = ignore # ignore/add/remove/force
# Add or remove newline between function scope and name
# Controls the newline after '::' in 'void A::f() { }'.
nl_func_scope_name = ignore # ignore/add/remove/force
# Add or remove newline between return type and function name in a prototype.
nl_func_proto_type_name = remove # ignore/add/remove/force
# Add or remove newline between a function name and the opening '(' in the declaration.
nl_func_paren = remove # ignore/add/remove/force
# Overrides nl_func_paren for functions with no parameters.
nl_func_paren_empty = remove # ignore/add/remove/force
# Add or remove newline between a function name and the opening '(' in the definition.
nl_func_def_paren = remove # ignore/add/remove/force
# Overrides nl_func_def_paren for functions with no parameters.
nl_func_def_paren_empty = remove # ignore/add/remove/force
# Add or remove newline between a function name and the opening '(' in the call
nl_func_call_paren = remove # ignore/add/remove/force
# Overrides nl_func_call_paren for functions with no parameters.
nl_func_call_paren_empty = remove # ignore/add/remove/force
# Add or remove newline after '(' in a function declaration.
nl_func_decl_start = ignore # ignore/add/remove/force
# Add or remove newline after '(' in a function definition.
nl_func_def_start = ignore # ignore/add/remove/force
# Overrides nl_func_decl_start when there is only one parameter.
nl_func_decl_start_single = ignore # ignore/add/remove/force
# Overrides nl_func_def_start when there is only one parameter.
nl_func_def_start_single = ignore # ignore/add/remove/force
# Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines.
nl_func_decl_start_multi_line = true # false/true
# Whether to add newline after '(' in a function definition if '(' and ')' are in different lines.
nl_func_def_start_multi_line = true # false/true
# Add or remove newline after each ',' in a function declaration.
nl_func_decl_args = ignore # ignore/add/remove/force
# Add or remove newline after each ',' in a function definition.
nl_func_def_args = ignore # ignore/add/remove/force
# Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines.
nl_func_decl_args_multi_line = true # false/true
# Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines.
nl_func_def_args_multi_line = true # false/true
# Add or remove newline before the ')' in a function declaration.
nl_func_decl_end = remove # ignore/add/remove/force
# Add or remove newline before the ')' in a function definition.
nl_func_def_end = remove # ignore/add/remove/force
# Overrides nl_func_decl_end when there is only one parameter.
nl_func_decl_end_single = ignore # ignore/add/remove/force
# Overrides nl_func_def_end when there is only one parameter.
nl_func_def_end_single = ignore # ignore/add/remove/force
# Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines.
nl_func_decl_end_multi_line = false # false/true
# Whether to add newline before ')' in a function definition if '(' and ')' are in different lines.
nl_func_def_end_multi_line = false # false/true
# Add or remove newline between '()' in a function declaration.
nl_func_decl_empty = remove # ignore/add/remove/force
# Add or remove newline between '()' in a function definition.
nl_func_def_empty = remove # ignore/add/remove/force
# Add or remove newline between '()' in a function call.
nl_func_call_empty = remove # ignore/add/remove/force
# Whether to add newline after '(' in a function call if '(' and ')' are in different lines.
nl_func_call_start_multi_line = false # false/true
# Whether to add newline after each ',' in a function call if '(' and ')' are in different lines.
nl_func_call_args_multi_line = false # false/true
# Whether to add newline before ')' in a function call if '(' and ')' are in different lines.
nl_func_call_end_multi_line = false # false/true
# Whether to put each OC message parameter on a separate line
# See nl_oc_msg_leave_one_liner.
nl_oc_msg_args = false # false/true
# Add or remove newline between function signature and '{'.
nl_fdef_brace = remove # ignore/add/remove/force
# Add or remove newline between C++11 lambda signature and '{'.
nl_cpp_ldef_brace = remove # ignore/add/remove/force
# Add or remove a newline between the return keyword and return expression.
nl_return_expr = ignore # ignore/add/remove/force
# Whether to put a newline after semicolons, except in 'for' statements.
nl_after_semicolon = true # false/true
# Java: Control the newline between the ')' and '{{' of the double brace initializer.
nl_paren_dbrace_open = ignore # ignore/add/remove/force
# Whether to put a newline after the type in an unnamed temporary direct-list-initialization.
nl_type_brace_init_lst = ignore # ignore/add/remove/force
# Whether to put a newline after open brace in an unnamed temporary direct-list-initialization.
nl_type_brace_init_lst_open = ignore # ignore/add/remove/force
# Whether to put a newline before close brace in an unnamed temporary direct-list-initialization.
nl_type_brace_init_lst_close = ignore # ignore/add/remove/force
# Whether to put a newline after brace open.
# This also adds a newline before the matching brace close.
nl_after_brace_open = false # false/true
# If nl_after_brace_open and nl_after_brace_open_cmt are True, a newline is
# placed between the open brace and a trailing single-line comment.
nl_after_brace_open_cmt = false # false/true
# Whether to put a newline after a virtual brace open with a non-empty body.
# These occur in un-braced if/while/do/for statement bodies.
nl_after_vbrace_open = false # false/true
# Whether to put a newline after a virtual brace open with an empty body.
# These occur in un-braced if/while/do/for statement bodies.
nl_after_vbrace_open_empty = false # false/true
# Whether to put a newline after a brace close.
# Does not apply if followed by a necessary ';'.
nl_after_brace_close = false # false/true
# Whether to put a newline after a virtual brace close.
# Would add a newline before return in: 'if (foo) a++; return;'.
nl_after_vbrace_close = false # false/true
# Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
# Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close.
nl_brace_struct_var = ignore # ignore/add/remove/force
# Whether to alter newlines in '#define' macros.
nl_define_macro = false # false/true
# Whether to alter newlines between consecutive paren closes,
# The number of closing paren in a line will depend on respective open paren lines
nl_squeeze_paren_close = false # false/true
# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs.
nl_squeeze_ifdef = false # false/true
# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well.
nl_squeeze_ifdef_top_level = false # false/true
# Add or remove blank line before 'if'.
nl_before_if = ignore # ignore/add/remove/force
# Add or remove blank line after 'if' statement.
# Add/Force work only if the next token is not a closing brace.
nl_after_if = ignore # ignore/add/remove/force
# Add or remove blank line before 'for'.
nl_before_for = ignore # ignore/add/remove/force
# Add or remove blank line after 'for' statement.
nl_after_for = ignore # ignore/add/remove/force
# Add or remove blank line before 'while'.
nl_before_while = ignore # ignore/add/remove/force
# Add or remove blank line after 'while' statement.
nl_after_while = ignore # ignore/add/remove/force
# Add or remove blank line before 'switch'.
nl_before_switch = ignore # ignore/add/remove/force
# Add or remove blank line after 'switch' statement.
nl_after_switch = ignore # ignore/add/remove/force
# Add or remove blank line before 'synchronized'.
nl_before_synchronized = ignore # ignore/add/remove/force
# Add or remove blank line after 'synchronized' statement.
nl_after_synchronized = ignore # ignore/add/remove/force
# Add or remove blank line before 'do'.
nl_before_do = ignore # ignore/add/remove/force
# Add or remove blank line after 'do/while' statement.
nl_after_do = ignore # ignore/add/remove/force
# Whether to double-space commented-entries in struct/union/enum.
nl_ds_struct_enum_cmt = false # false/true
# force nl before } of a struct/union/enum
# (lower priority than 'eat_blanks_before_close_brace').
nl_ds_struct_enum_close_brace = false # false/true
# Add or remove blank line before 'func_class_def'.
nl_before_func_class_def = 0 # unsigned number
# Add or remove blank line before 'func_class_proto'.
nl_before_func_class_proto = 0 # unsigned number
# Add or remove a newline before/after a class colon,
# (tied to pos_class_colon).
nl_class_colon = ignore # ignore/add/remove/force
# Add or remove a newline around a class constructor colon.
# Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma.
nl_constr_colon = ignore # ignore/add/remove/force
# If true turns two liner namespace to one liner,else will make then four liners
nl_namespace_two_to_one_liner = false # false/true
# Change simple unbraced if statements into a one-liner
# 'if(b)\n i++;' => 'if(b) i++;'.
nl_create_if_one_liner = false # false/true
# Change simple unbraced for statements into a one-liner
# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'.
nl_create_for_one_liner = false # false/true
# Change simple unbraced while statements into a one-liner
# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'.
nl_create_while_one_liner = false # false/true
# Change simple 4,3,2 liner function def statements into a one-liner
nl_create_func_def_one_liner = false # false/true
# Change a one-liner if statement into simple unbraced if
# 'if(b) i++;' => 'if(b)\n i++;'.
nl_split_if_one_liner = false # false/true
# Change a one-liner for statement into simple unbraced for
# 'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++)\n foo(i);'.
nl_split_for_one_liner = false # false/true
# Change a one-liner while statement into simple unbraced while
# 'while (i<5) foo(i++);' => 'while (i<5)\n foo(i++);'.
nl_split_while_one_liner = false # false/true
#
# Blank line options
#
# The maximum consecutive newlines (3 = 2 blank lines).
nl_max = 2 # unsigned number
# The maximum consecutive newlines in function.
nl_max_blank_in_func = 0 # unsigned number
# The number of newlines after a function prototype, if followed by another function prototype.
nl_after_func_proto = 2 # unsigned number
# The number of newlines after a function prototype, if not followed by another function prototype.
nl_after_func_proto_group = 0 # unsigned number
# The number of newlines after a function class prototype, if followed by another function class prototype.
nl_after_func_class_proto = 0 # unsigned number
# The number of newlines after a function class prototype, if not followed by another function class prototype.
nl_after_func_class_proto_group = 0 # unsigned number
# The number of newlines before a multi-line function def body.
nl_before_func_body_def = 0 # unsigned number
# The number of newlines before a multi-line function prototype body.
nl_before_func_body_proto = 0 # unsigned number
# The number of newlines after '}' of a multi-line function body.
nl_after_func_body = 0 # unsigned number
# The number of newlines after '}' of a multi-line function body in a class declaration.
nl_after_func_body_class = 0 # unsigned number
# The number of newlines after '}' of a single line function body.
nl_after_func_body_one_liner = 0 # unsigned number
# The minimum number of newlines before a multi-line comment.
# Doesn't apply if after a brace open or another multi-line comment.
nl_before_block_comment = 0 # unsigned number
# The minimum number of newlines before a single-line C comment.
# Doesn't apply if after a brace open or other single-line C comments.
nl_before_c_comment = 0 # unsigned number
# The minimum number of newlines before a CPP comment.
# Doesn't apply if after a brace open or other CPP comments.
nl_before_cpp_comment = 0 # unsigned number
# Whether to force a newline after a multi-line comment.
nl_after_multiline_comment = false # false/true
# Whether to force a newline after a label's colon.
nl_after_label_colon = false # false/true
# The number of newlines after '}' or ';' of a struct/enum/union definition.
nl_after_struct = 2 # unsigned number
# The number of newlines before a class definition.
nl_before_class = 0 # unsigned number
# The number of newlines after '}' or ';' of a class definition.
nl_after_class = 2 # unsigned number
# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
# Will not change the newline count if after a brace open.
# 0 = No change.
nl_before_access_spec = 2 # unsigned number
# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label.
# 0 = No change.
# Overrides 'nl_typedef_blk_start' and 'nl_var_def_blk_start'.
nl_after_access_spec = 2 # unsigned number
# The number of newlines between a function def and the function comment.
# 0 = No change.
nl_comment_func_def = 0 # unsigned number
# The number of newlines after a try-catch-finally block that isn't followed by a brace close.
# 0 = No change.
nl_after_try_catch_finally = 0 # unsigned number
# The number of newlines before and after a property, indexer or event decl.
# 0 = No change.
nl_around_cs_property = 0 # unsigned number
# The number of newlines between the get/set/add/remove handlers in C#.
# 0 = No change.
nl_between_get_set = 0 # unsigned number
# Add or remove newline between C# property and the '{'.
nl_property_brace = ignore # ignore/add/remove/force
# Whether to remove blank lines after '{'.
eat_blanks_after_open_brace = false # false/true
# Whether to remove blank lines before '}'.
eat_blanks_before_close_brace = false # false/true
# How aggressively to remove extra newlines not in preproc.
# 0: No change
# 1: Remove most newlines not handled by other config
# 2: Remove all newlines and reformat completely by config
nl_remove_extra_newlines = 0 # unsigned number
# Whether to put a blank line before 'return' statements, unless after an open brace.
nl_before_return = false # false/true
# Whether to put a blank line after 'return' statements, unless followed by a close brace.
nl_after_return = false # false/true
# Whether to put a newline after a Java annotation statement.
# Only affects annotations that are after a newline.
nl_after_annotation = ignore # ignore/add/remove/force
# Controls the newline between two annotations.
nl_between_annotation = ignore # ignore/add/remove/force
#
# Positioning options
#
# The position of arithmetic operators in wrapped expressions.
pos_arith = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of assignment in wrapped expressions.
# Do not affect '=' followed by '{'.
pos_assign = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of boolean operators in wrapped expressions.
pos_bool = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of comparison operators in wrapped expressions.
pos_compare = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of conditional (b ? t : f) operators in wrapped expressions.
pos_conditional = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of the comma in wrapped expressions.
pos_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of the comma in enum entries.
pos_enum_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of the comma in the base class list if there are more than one line,
# (tied to nl_class_init_args).
pos_class_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of the comma in the constructor initialization list.
# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon.
pos_constr_comma = trail # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of trailing/leading class colon, between class and base class list
# (tied to nl_class_colon).
pos_class_colon = lead # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
# The position of colons between constructor and member initialization,
# (tied to nl_constr_colon).
# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma.
pos_constr_colon = lead # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
#
# Line Splitting options
#
# Try to limit code width to N number of columns
code_width = 110 # unsigned number
# Whether to fully split long 'for' statements at semi-colons.
ls_for_split_full = true # false/true
# Whether to fully split long function protos/calls at commas.
ls_func_split_full = true # false/true
# Whether to split lines as close to code_width as possible and ignore some groupings.
ls_code_width = false # false/true
#
# Code alignment (not left column spaces/tabs)
#
# Whether to keep non-indenting tabs.
align_keep_tabs = false # false/true
# Whether to use tabs for aligning.
align_with_tabs = false # false/true
# Whether to bump out to the next tab when aligning.
align_on_tabstop = true # false/true
# Whether to right-align numbers.
align_number_right = true # false/true
# Whether to keep whitespace not required for alignment.
align_keep_extra_space = true # false/true
# Align variable definitions in prototypes and functions.
align_func_params = false # false/true
# The span for aligning parameter definitions in function on parameter name (0=don't align).
align_func_params_span = 0 # unsigned number
# The threshold for aligning function parameter definitions (0=no limit).
align_func_params_thresh = 0 # unsigned number
# The gap for aligning function parameter definitions.
align_func_params_gap = 0 # unsigned number
# Align parameters in single-line functions that have the same name.
# The function names must already be aligned with each other.
align_same_func_call_params = false # false/true
# The span for aligning variable definitions (0=don't align)
align_var_def_span = 0 # unsigned number
# How to align the star in variable definitions.
# 0=Part of the type 'void * foo;'
# 1=Part of the variable 'void *foo;'
# 2=Dangling 'void *foo;'
align_var_def_star_style = 0 # unsigned number
# How to align the '&' in variable definitions.
# 0=Part of the type
# 1=Part of the variable
# 2=Dangling
align_var_def_amp_style = 0 # unsigned number
# The threshold for aligning variable definitions (0=no limit)
align_var_def_thresh = 0 # unsigned number
# The gap for aligning variable definitions.
align_var_def_gap = 0 # unsigned number
# Whether to align the colon in struct bit fields.
align_var_def_colon = false # false/true
# align variable defs gap for bit colons.
align_var_def_colon_gap = 0 # unsigned number
# Whether to align any attribute after the variable name.
align_var_def_attribute = false # false/true
# Whether to align inline struct/enum/union variable definitions.
align_var_def_inline = false # false/true
# The span for aligning on '=' in assignments (0=don't align)
align_assign_span = 0 # unsigned number
# The threshold for aligning on '=' in assignments (0=no limit)
align_assign_thresh = 0 # unsigned number
# The span for aligning on '=' in enums (0=don't align)
align_enum_equ_span = 1 # unsigned number
# The threshold for aligning on '=' in enums (0=no limit)
align_enum_equ_thresh = 0 # unsigned number
# The span for aligning class (0=don't align)
align_var_class_span = 0 # unsigned number
# The threshold for aligning class member definitions (0=no limit).
align_var_class_thresh = 0 # unsigned number
# The gap for aligning class member definitions.
align_var_class_gap = 0 # unsigned number
# The span for aligning struct/union (0=don't align)
align_var_struct_span = 0 # unsigned number
# The threshold for aligning struct/union member definitions (0=no limit)
align_var_struct_thresh = 0 # unsigned number
# The gap for aligning struct/union member definitions.
align_var_struct_gap = 0 # unsigned number
# The span for aligning struct initializer values (0=don't align)
align_struct_init_span = 0 # unsigned number
# The minimum space between the type and the synonym of a typedef.
align_typedef_gap = 0 # unsigned number
# The span for aligning single-line typedefs (0=don't align).
align_typedef_span = 0 # unsigned number
# How to align typedef'd functions with other typedefs
# 0: Don't mix them at all
# 1: align the open paren with the types
# 2: align the function type name with the other type names
align_typedef_func = 0 # unsigned number
# Controls the positioning of the '*' in typedefs. Just try it.
# 0: Align on typedef type, ignore '*'
# 1: The '*' is part of type name: typedef int *pint;
# 2: The '*' is part of the type, but dangling: typedef int *pint;
align_typedef_star_style = 0 # unsigned number
# Controls the positioning of the '&' in typedefs. Just try it.
# 0: Align on typedef type, ignore '&'
# 1: The '&' is part of type name: typedef int &pint;
# 2: The '&' is part of the type, but dangling: typedef int &pint;
align_typedef_amp_style = 0 # unsigned number
# The span for aligning comments that end lines (0=don't align)
align_right_cmt_span = 0 # unsigned number
# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment.
align_right_cmt_mix = false # false/true
# If a trailing comment is more than this number of columns away from the text it follows,
# it will qualify for being aligned. This has to be > 0 to do anything.
align_right_cmt_gap = 0 # unsigned number
# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
align_right_cmt_at_col = 0 # unsigned number
# The span for aligning function prototypes (0=don't align).
align_func_proto_span = 0 # unsigned number
# Minimum gap between the return type and the function name.
align_func_proto_gap = 0 # unsigned number
# Align function protos on the 'operator' keyword instead of what follows.
align_on_operator = false # false/true
# Whether to mix aligning prototype and variable declarations.
# If True, align_var_def_XXX options are used instead of align_func_proto_XXX options.
align_mix_var_proto = false # false/true
# Align single-line functions with function prototypes, uses align_func_proto_span.
align_single_line_func = false # false/true
# Aligning the open brace of single-line functions.
# Requires align_single_line_func=True, uses align_func_proto_span.
align_single_line_brace = false # false/true
# Gap for align_single_line_brace.
align_single_line_brace_gap = 0 # unsigned number
# The span for aligning ObjC msg spec (0=don't align)
align_oc_msg_spec_span = 0 # unsigned number
# Whether to align macros wrapped with a backslash and a newline.
# This will not work right if the macro contains a multi-line comment.
align_nl_cont = true # false/true
# # Align macro functions and variables together.
align_pp_define_together = false # false/true
# The minimum space between label and value of a preprocessor define.
align_pp_define_gap = 1 # unsigned number
# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)
align_pp_define_span = 1 # unsigned number
# Align lines that start with '<<' with previous '<<'. Default=True.
align_left_shift = true # false/true
# Align text after asm volatile () colons.
align_asm_colon = false # false/true
# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
align_oc_msg_colon_span = 0 # unsigned number
# If True, always align with the first parameter, even if it is too short.
align_oc_msg_colon_first = false # false/true
# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'.
align_oc_decl_colon = false # false/true
#
# Comment modifications
#
# Try to wrap comments at cmt_width columns
cmt_width = 80 # unsigned number
# Set the comment reflow mode (Default=0)
# 0: no reflowing (apart from the line wrapping due to cmt_width)
# 1: no touching at all
# 2: full reflow
cmt_reflow_mode = 0 # unsigned number
# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.
cmt_convert_tab_to_spaces = true # false/true
# If False, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars.
# Default=True.
cmt_indent_multi = true # false/true
# Whether to group c-comments that look like they are in a block.
cmt_c_group = false # false/true
# Whether to put an empty '/*' on the first line of the combined c-comment.
cmt_c_nl_start = false # false/true
# Whether to put a newline before the closing '*/' of the combined c-comment.
cmt_c_nl_end = false # false/true
# Whether to group cpp-comments that look like they are in a block.
cmt_cpp_group = false # false/true
# Whether to put an empty '/*' on the first line of the combined cpp-comment.
cmt_cpp_nl_start = false # false/true
# Whether to put a newline before the closing '*/' of the combined cpp-comment.
cmt_cpp_nl_end = false # false/true
# Whether to change cpp-comments into c-comments.
cmt_cpp_to_c = false # false/true
# Whether to put a star on subsequent comment lines.
cmt_star_cont = false # false/true
# The number of spaces to insert at the start of subsequent comment lines.
cmt_sp_before_star_cont = 0 # unsigned number
# The number of spaces to insert after the star on subsequent comment lines.
cmt_sp_after_star_cont = 0 # number
# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
# the comment are the same length. Default=True.
cmt_multi_check_last = true # false/true
# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
# the comment are the same length AND if the length is bigger as the first_len minimum. Default=4
cmt_multi_first_len_minimum = 4 # unsigned number
# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
# Will substitute $(filename) with the current file's name.
cmt_insert_file_header = "" # string
# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
# Will substitute $(filename) with the current file's name.
cmt_insert_file_footer = "" # string
# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }.
cmt_insert_func_header = "" # string
# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
# Will substitute $(class) with the class name.
cmt_insert_class_header = "" # string
# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
cmt_insert_oc_msg_header = "" # string
# If a preprocessor is encountered when stepping backwards from a function name, then
# this option decides whether the comment should be inserted.
# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
cmt_insert_before_preproc = false # false/true
# If a function is declared inline to a class definition, then
# this option decides whether the comment should be inserted.
# Affects cmt_insert_func_header.
cmt_insert_before_inlines = true # false/true
# If the function is a constructor/destructor, then
# this option decides whether the comment should be inserted.
# Affects cmt_insert_func_header.
cmt_insert_before_ctor_dtor = false # false/true
#
# Code modifying options (non-whitespace)
#
# Add or remove braces on single-line 'do' statement.
mod_full_brace_do = add # ignore/add/remove/force
# Add or remove braces on single-line 'for' statement.
mod_full_brace_for = add # ignore/add/remove/force
# Add or remove braces on single-line function definitions. (Pawn).
mod_full_brace_function = add # ignore/add/remove/force
# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
mod_full_brace_if = add # ignore/add/remove/force
# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
mod_full_brace_if_chain = false # false/true
# Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced.
# If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces,
# and simple 'if' statements will lose them (if possible).
mod_full_brace_if_chain_only = false # false/true
# Don't remove braces around statements that span N newlines
mod_full_brace_nl = 0 # unsigned number
# Blocks removal of braces if the parenthesis of if/for/while/.. span multiple lines.
mod_full_brace_nl_block_rem_mlcond = false # false/true
# Add or remove braces on single-line 'while' statement.
mod_full_brace_while = add # ignore/add/remove/force
# Add or remove braces on single-line 'using ()' statement.
mod_full_brace_using = ignore # ignore/add/remove/force
# Add or remove unnecessary paren on 'return' statement.
mod_paren_on_return = ignore # ignore/add/remove/force
# Whether to change optional semicolons to real semicolons.
mod_pawn_semicolon = false # false/true
# Add parens on 'while' and 'if' statement around bools.
mod_full_paren_if_bool = false # false/true
# Whether to remove superfluous semicolons.
mod_remove_extra_semicolon = true # false/true
# If a function body exceeds the specified number of newlines and doesn't have a comment after
# the close brace, a comment will be added.
mod_add_long_function_closebrace_comment = 0 # unsigned number
# If a namespace body exceeds the specified number of newlines and doesn't have a comment after
# the close brace, a comment will be added.
mod_add_long_namespace_closebrace_comment = 0 # unsigned number
# If a class body exceeds the specified number of newlines and doesn't have a comment after
# the close brace, a comment will be added.
mod_add_long_class_closebrace_comment = 0 # unsigned number
# If a switch body exceeds the specified number of newlines and doesn't have a comment after
# the close brace, a comment will be added.
mod_add_long_switch_closebrace_comment = 0 # unsigned number
# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
# the #endif, a comment will be added.
mod_add_long_ifdef_endif_comment = 0 # unsigned number
# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
# the #else, a comment will be added.
mod_add_long_ifdef_else_comment = 0 # unsigned number
# If True, will sort consecutive single-line 'import' statements [Java, D].
mod_sort_import = false # false/true
# If True, will sort consecutive single-line 'using' statements [C#].
mod_sort_using = false # false/true
# If True, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
# This is generally a bad idea, as it may break your code.
mod_sort_include = false # false/true
# If True, it will move a 'break' that appears after a fully braced 'case' before the close brace.
mod_move_case_break = true # false/true
# Will add or remove the braces around a fully braced case statement.
# Will only remove the braces if there are no variable declarations in the block.
mod_case_brace = ignore # ignore/add/remove/force
# If True, it will remove a void 'return;' that appears as the last statement in a function.
mod_remove_empty_return = true # false/true
# If True, it will organize the properties (Obj-C).
mod_sort_oc_properties = false # false/true
# Determines weight of class property modifier (Obj-C).
mod_sort_oc_property_class_weight = 0 # number
# Determines weight of atomic, nonatomic (Obj-C).
mod_sort_oc_property_thread_safe_weight = 0 # number
# Determines weight of readwrite (Obj-C).
mod_sort_oc_property_readwrite_weight = 0 # number
# Determines weight of reference type (retain, copy, assign, weak, strong) (Obj-C).
mod_sort_oc_property_reference_weight = 0 # number
# Determines weight of getter type (getter=) (Obj-C).
mod_sort_oc_property_getter_weight = 0 # number
# Determines weight of setter type (setter=) (Obj-C).
mod_sort_oc_property_setter_weight = 0 # number
# Determines weight of nullability type (nullable, nonnull, null_unspecified, null_resettable) (Obj-C).
mod_sort_oc_property_nullability_weight = 0 # number
#
# Preprocessor options
#
# Control indent of preprocessors inside #if blocks at brace level 0 (file-level).
pp_indent = force # ignore/add/remove/force
# Whether to indent #if/#else/#endif at the brace level (True) or from column 1 (False).
pp_indent_at_level = false # false/true
# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
# If pp_indent_at_level=False, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
# Default=1.
pp_indent_count = 0 # unsigned number
# Add or remove space after # based on pp_level of #if blocks.
pp_space = ignore # ignore/add/remove/force
# Sets the number of spaces added with pp_space.
pp_space_count = 0 # unsigned number
# The indent for #region and #endregion in C# and '#pragma region' in C/C++.
pp_indent_region = 0 # number
# Whether to indent the code between #region and #endregion.
pp_region_indent_code = false # false/true
# If pp_indent_at_level=True, sets the indent for #if, #else and #endif when not at file-level.
# 0: indent preprocessors using output_tab_size.
# >0: column at which all preprocessors will be indented.
pp_indent_if = 0 # number
# Control whether to indent the code between #if, #else and #endif.
pp_if_indent_code = false # false/true
# Whether to indent '#define' at the brace level (True) or from column 1 (false).
pp_define_at_level = false # false/true
# Whether to ignore the '#define' body while formatting.
pp_ignore_define_body = false # false/true
# Whether to indent case statements between #if, #else, and #endif.
# Only applies to the indent of the preprocesser that the case statements directly inside of.
pp_indent_case = true # false/true
# Whether to indent whole function definitions between #if, #else, and #endif.
# Only applies to the indent of the preprocesser that the function definition is directly inside of.
pp_indent_func_def = true # false/true
# Whether to indent extern C blocks between #if, #else, and #endif.
# Only applies to the indent of the preprocesser that the extern block is directly inside of.
pp_indent_extern = true # false/true
# Whether to indent braces directly inside #if, #else, and #endif.
# Only applies to the indent of the preprocesser that the braces are directly inside of.
pp_indent_brace = true # false/true
#
# Sort includes options
#
# The regex for include category with priority 0.
include_category_0 = "" # string
# The regex for include category with priority 1.
include_category_1 = "" # string
# The regex for include category with priority 2.
include_category_2 = "" # string
#
# Use or Do not Use options
#
# True: indent_func_call_param will be used (default)
# False: indent_func_call_param will NOT be used.
use_indent_func_call_param = true # false/true
# The value of the indentation for a continuation line is calculate differently if the statement is:
# a declaration: your case with QString fileName ...
# an assignment: your case with pSettings = new QSettings( ...
# At the second case the indentation value might be used twice:
# at the assignment
# at the function call (if present)
# To prevent the double use of the indentation value, use this option with the value 'True'.
# True: indent_continue will be used only once
# False: indent_continue will be used every time (default).
use_indent_continue_only_once = false # false/true
# the value might be used twice:
# at the assignment
# at the opening brace
# To prevent the double use of the indentation value, use this option with the value 'True'.
# True: indentation will be used only once
# False: indentation will be used every time (default).
indent_cpp_lambda_only_once = true # false/true
# SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details.
# Default=True.
use_options_overriding_for_qt_macros = true # false/true
#
# Warn levels - 1: error, 2: warning (default), 3: note
#
# Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal.
warn_level_tabs_found_in_verbatim_string_literals = 2 # unsigned number
# Meaning of the settings:
# Ignore - do not do any changes
# Add - makes sure there is 1 or more space/brace/newline/etc
# Force - makes sure there is exactly 1 space/brace/newline/etc,
# behaves like Add in some contexts
# Remove - removes space/brace/newline/etc
#
#
# - Token(s) can be treated as specific type(s) with the 'set' option:
# `set tokenType tokenString [tokenString...]`
#
# Example:
# `set BOOL __AND__ __OR__`
#
# tokenTypes are defined in src/token_enum.h, use them without the
# 'CT_' prefix: 'CT_BOOL' -> 'BOOL'
#
#
# - Token(s) can be treated as type(s) with the 'type' option.
# `type tokenString [tokenString...]`
#
# Example:
# `type int c_uint_8 Rectangle`
#
# This can also be achieved with `set TYPE int c_uint_8 Rectangle`
#
#
# To embed whitespace in tokenStrings use the '\' escape character, or quote
# the tokenStrings. These quotes are supported: "'`
#
#
# - Support for the auto detection of languages through the file ending can be
# added using the 'file_ext' command.
# `file_ext langType langString [langString..]`
#
# Example:
# `file_ext CPP .ch .cxx .cpp.in`
#
# langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use
# them without the 'LANG_' prefix: 'LANG_CPP' -> 'CPP'
#
#
# - Custom macro-based indentation can be set up using 'macro-open',
# 'macro-else' and 'macro-close'.
# `(macro-open | macro-else | macro-close) tokenString`
#
# Example:
# `macro-open BEGIN_TEMPLATE_MESSAGE_MAP`
# `macro-open BEGIN_MESSAGE_MAP`
# `macro-close END_MESSAGE_MAP`
#
#
# option(s) with 'not default' value: 0
#
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...