| ae458f5 | Ilya Dryomov | 11 February 2016, 12:09:15 UTC | libceph: make r_request msg_size calculation clearer Although msg_size is calculated correctly, the terms are grouped in a misleading way - snaps appears to not have room for a u32 length. Move calculation closer to its use and regroup terms. No functional change. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:42 UTC |
| 7665d85 | Yan, Zheng | 07 January 2016, 08:48:57 UTC | libceph: move r_reply_op_{len,result} into struct ceph_osd_req_op This avoids defining large array of r_reply_op_{len,result} in in struct ceph_osd_request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:42 UTC |
| de2aa10 | Ilya Dryomov | 08 February 2016, 12:39:46 UTC | libceph: rename ceph_osd_req_op::payload_len to indata_len Follow userspace nomenclature on this - the next commit adds outdata_len. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:41 UTC |
| a587d71 | Yan, Zheng | 27 January 2016, 01:30:29 UTC | ceph: remove useless BUG_ON ceph_osdc_start_request() never return -EOLDSNAP Signed-off-by: Yan, Zheng <zyan@redhat.com> | 25 March 2016, 17:51:41 UTC |
| 133e915 | Yan, Zheng | 25 January 2016, 02:44:33 UTC | ceph: don't enable rbytes mount option by default When rbytes mount option is enabled, directory size is recursive size. Recursive size is not updated instantly. This can cause directory size to change between successive stat(1) Signed-off-by: Yan, Zheng <zyan@redhat.com> | 25 March 2016, 17:51:41 UTC |
| d1eee0c | Yan, Zheng | 22 January 2016, 10:30:12 UTC | ceph: encode ctime in cap message Signed-off-by: Yan, Zheng <zyan@redhat.com> | 25 March 2016, 17:51:40 UTC |
| b5d9170 | Ilya Dryomov | 23 January 2016, 14:57:51 UTC | libceph: behave in mon_fault() if cur_mon < 0 This can happen if __close_session() in ceph_monc_stop() races with a connection reset. We need to ignore such faults, otherwise it's likely we would take !hunting, call __schedule_delayed() and end up with delayed_work() executing on invalid memory, among other things. The (two!) con->private tests are useless, as nothing ever clears con->private. Nuke them. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:40 UTC |
| bee3a37 | Ilya Dryomov | 22 January 2016, 17:42:17 UTC | libceph: reschedule tick in mon_fault() Doing __schedule_delayed() in the hunting branch is pointless, as the tick will have already been scheduled by then. What we need to do instead is *reschedule* it in the !hunting branch, after reopen_session() changes hunt_mult, which affects the delay. This helps with spacing out connection attempts and avoiding things like two back-to-back attempts followed by a longer period of waiting around. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:40 UTC |
| 1752b50 | Ilya Dryomov | 21 January 2016, 15:33:25 UTC | libceph: introduce and switch to reopen_session() hunting is now set in __open_session() and cleared in finish_hunting(), instead of all around. The "session lost" message is printed not only on connection resets, but also on keepalive timeouts. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:39 UTC |
| 168b909 | Ilya Dryomov | 21 January 2016, 15:33:19 UTC | libceph: monc hunt rate is 3s with backoff up to 30s Unless we are in the process of setting up a client (i.e. connecting to the monitor cluster for the first time), apply a backoff: every time we want to reopen a session, increase our timeout by a multiple (currently 2); when we complete the connection, reduce that multipler by 50%. Mirrors ceph.git commit 794c86fd289bd62a35ed14368fa096c46736e9a2. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:39 UTC |
| 58d81b1 | Ilya Dryomov | 21 January 2016, 15:33:15 UTC | libceph: monc ping rate is 10s Split ping interval and ping timeout: ping interval is 10s; keepalive timeout is 30s. Make monc_ping_timeout a constant while at it - it's not actually exported as a mount option (and the rest of tick-related settings won't be either), so it's got no place in ceph_options. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:39 UTC |
| 0e04dc2 | Ilya Dryomov | 20 January 2016, 16:50:31 UTC | libceph: pick a different monitor when reconnecting Don't try to reconnect to the same monitor when we fail to establish a session within a timeout or it's lost. For that, pick_new_mon() needs to see the old value of cur_mon, so don't clear it in __close_session() - all calls to __close_session() but one are followed by __open_session() anyway. __open_session() is only called when a new session needs to be established, so the "already open?" branch, which is now in the way, is simply dropped. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:38 UTC |
| 82dcaba | Ilya Dryomov | 19 January 2016, 15:19:06 UTC | libceph: revamp subs code, switch to SUBSCRIBE2 protocol It is currently hard-coded in the mon_client that mdsmap and monmap subs are continuous, while osdmap sub is always "onetime". To better handle full clusters/pools in the osd_client, we need to be able to issue continuous osdmap subs. Revamp subs code to allow us to specify for each sub whether it should be continuous or not. Although not strictly required for the above, switch to SUBSCRIBE2 protocol while at it, eliminating the ambiguity between a request for "every map since X" and a request for "just the latest" when we don't have a map yet (i.e. have epoch 0). SUBSCRIBE2 feature bit is now required - it's been supported since pre-argonaut (2010). Move "got mdsmap" call to the end of ceph_mdsc_handle_map() - calling in before we validate the epoch and successfully install the new map can mess up mon_client sub state. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:38 UTC |
| 0f9af16 | Ilya Dryomov | 08 January 2016, 18:17:22 UTC | libceph: decouple hunting and subs management Coupling hunting state with subscribe state is not a good idea. Clear hunting when we complete the authentication handshake. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:38 UTC |
| 02ac956 | Ilya Dryomov | 06 January 2016, 09:56:21 UTC | libceph: move debugfs initialization into __ceph_open_session() Our debugfs dir name is a concatenation of cluster fsid and client unique ID ("global_id"). It used to be the case that we learned global_id first, nowadays we always learn fsid first - the monmap is sent before any auth replies are. ceph_debugfs_client_init() call in ceph_monc_handle_map() is therefore never executed and can be removed. Its counterpart in handle_auth_reply() doesn't really belong there either: having to do monc->client and unlocking early to work around lockdep is a testament to that. Move it into __ceph_open_session(), where it can be called unconditionally. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> | 25 March 2016, 17:51:37 UTC |
| 3c2de27 | Linus Torvalds | 20 March 2016, 01:52:29 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: - Preparations of parallel lookups (the remaining main obstacle is the need to move security_d_instantiate(); once that becomes safe, the rest will be a matter of rather short series local to fs/*.c - preadv2/pwritev2 series from Christoph - assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits) splice: handle zero nr_pages in splice_to_pipe() vfs: show_vfsstat: do not ignore errors from show_devname method dcache.c: new helper: __d_add() don't bother with __d_instantiate(dentry, NULL) untangle fsnotify_d_instantiate() a bit uninline d_add() replace d_add_unique() with saner primitive quota: use lookup_one_len_unlocked() cifs_get_root(): use lookup_one_len_unlocked() nfs_lookup: don't bother with d_instantiate(dentry, NULL) kill dentry_unhash() ceph_fill_trace(): don't bother with d_instantiate(dn, NULL) autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup() configfs: move d_rehash() into configfs_create() for regular files ceph: don't bother with d_rehash() in splice_dentry() namei: teach lookup_slow() to skip revalidate namei: massage lookup_slow() to be usable by lookup_one_len_unlocked() lookup_one_len_unlocked(): use lookup_dcache() namei: simplify invalidation logics in lookup_dcache() namei: change calling conventions for lookup_{fast,slow} and follow_managed() ... | 20 March 2016, 01:52:29 UTC |
| 51b3eae | Linus Torvalds | 20 March 2016, 00:52:49 UTC | Merge branch 'stable-4.6' of git://git.infradead.org/users/pcmoore/audit Pull audit updates from Paul Moore: "A small set of patches for audit this time; just three in total and one is a spelling fix. The two patches with actual content are designed to help prevent new instances of auditd from displacing an existing, functioning auditd and to generate a log of the attempt. Not to worry, dead/stuck auditd instances can still be replaced by a new instance without problem. Nothing controversial, and everything passes our regression suite" * 'stable-4.6' of git://git.infradead.org/users/pcmoore/audit: audit: Fix typo in comment audit: log failed attempts to change audit_pid configuration audit: stop an old auditd being starved out by a new auditd | 20 March 2016, 00:52:49 UTC |
| de06dbf | Linus Torvalds | 19 March 2016, 23:31:54 UTC | Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM updates from Russell King: "Another mixture of changes this time around: - Split XIP linker file from main linker file to make it more maintainable, and various XIP fixes, and clean up a resulting macro. - Decompressor cleanups from Masahiro Yamada - Avoid printing an error for a missing L2 cache - Remove some duplicated symbols in System.map, and move vectors/stubs back into kernel VMA - Various low priority fixes from Arnd - Updates to allow bus match functions to return negative errno values, touching some drivers and the driver core. Greg has acked these changes. - Virtualisation platform udpates form Jean-Philippe Brucker. - Security enhancements from Kees Cook - Rework some Kconfig dependencies and move PSCI idle management code out of arch/arm into drivers/firmware/psci.c - ARM DMA mapping updates, touching media, acked by Mauro. - Fix places in ARM code which should be using virt_to_idmap() so that Keystone2 can work. - Fix Marvell Tauros2 to work again with non-DT boots. - Provide a delay timer for ARM Orion platforms" * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits) ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0 ARM: 8547/1: dma-mapping: store buffer information ARM: 8543/1: decompressor: rename suffix_y to compress-y ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile ARM: 8541/1: decompressor: drop redundant FORCE in Makefile ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files ARM: 8539/1: decompressor: drop more unneeded assignments to "targets" ARM: 8538/1: decompressor: drop unneeded assignments to "targets" ARM: 8532/1: uncompress: mark putc as inline ARM: 8531/1: turn init_new_context into an inline function ARM: 8530/1: remove VIRT_TO_BUS ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs ARM: make the physical-relative calculation more obvious ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL ARM: 8411/1: Add default SPARSEMEM settings ARM: 8503/1: clk_register_clkdev: remove format string interface ARM: 8529/1: remove 'i' and 'zi' targets ... | 19 March 2016, 23:31:54 UTC |
| b31a3bc | Linus Torvalds | 19 March 2016, 23:09:43 UTC | Merge tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh Pull arch/sh updates from Rich Felker: "This includes minor cleanups, a fix for a crash that likely affects all sh models with MMU, and introduction of a framework for boards described by device tree, which sets the stage for future J2 support" * tag 'tag-sh-for-4.6' of git://git.libc.org/linux-sh: sched/preempt, sh: kmap_coherent relies on disabled preemption sh: add SMP method selection to device tree pseudo-board sh: add device tree support and generic board using device tree sh: remove arch-specific localtimer and use generic one sh: make MMU-specific SMP code conditional on CONFIG_MMU sh: provide unified syscall trap compatible with all SH models sh: New gcc support sh: Disable trace for kernel uncompressing. sh: Use generic clkdev.h header | 19 March 2016, 23:09:43 UTC |
| d5e2d00 | Linus Torvalds | 19 March 2016, 22:38:41 UTC | Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ... | 19 March 2016, 22:38:41 UTC |
| 31e1823 | Linus Torvalds | 19 March 2016, 22:15:07 UTC | Merge tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - new tool 'dtx_diff' to diff DT files - sync kernel's dtc/libfdt to current dtc repo master - fix for reserved memory regions located in highmem - document standard unit suffixes for DT properties - various DT binding doc updates * tag 'devicetree-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Add vendor prefix for eGalax_eMPIA Technology Inc Input: ads7846: Add description how to use internal reference (ADS7846) ARM: realview: add EB syscon variants to bindings devicetree: bindings: ARM: Use "uV" for micro-volt serial: fsl-imx-uart: Fix typo in fsl,dte-mode description of: add 'const' for of_property_*_string*() parameter '*np' of/unittest: fix infinite loop in of_unittest_destroy_tracked_overlays() of: alloc anywhere from memblock if range not specified kbuild: Allow using host dtc instead of kernel's copy of: resolver: Add missing of_node_get and of_node_put of: Add United Radiant Technology Corporation vendor prefix dt/bindings: add documentation on standard property unit suffixes scripts/dtc: Update to upstream commit b06e55c88b9b ARM: boot: Add an implementation of strnlen for libfdt scripts/dtc: dtx_diff - add info to error message dtc: create tool to diff device trees | 19 March 2016, 22:15:07 UTC |
| 1200b68 | Linus Torvalds | 19 March 2016, 17:05:34 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ... | 19 March 2016, 17:05:34 UTC |
| 6b5f04b | Linus Torvalds | 19 March 2016, 03:25:49 UTC | Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "cgroup changes for v4.6-rc1. No userland visible behavior changes in this pull request. I'll send out a separate pull request for the addition of cgroup namespace support. - The biggest change is the revamping of cgroup core task migration and controller handling logic. There are quite a few places where controllers and tasks are manipulated. Previously, many of those places implemented custom operations for each specific use case assuming specific starting conditions. While this worked, it makes the code fragile and difficult to follow. The bulk of this pull request restructures these operations so that most related operations are performed through common helpers which implement recursive (subtrees are always processed consistently) and idempotent (they make cgroup hierarchy converge to the target state rather than performing operations assuming specific starting conditions). This makes the code a lot easier to understand, verify and extend. - Implicit controller support is added. This is primarily for using perf_event on the v2 hierarchy so that perf can match cgroup v2 path without requiring the user to do anything special. The kernel portion of perf_event changes is acked but userland changes are still pending review. - cgroup_no_v1= boot parameter added to ease testing cgroup v2 in certain environments. - There is a regression introduced during v4.4 devel cycle where attempts to migrate zombie tasks can mess up internal object management. This was fixed earlier this week and included in this pull request w/ stable cc'd. - Misc non-critical fixes and improvements" * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (44 commits) cgroup: avoid false positive gcc-6 warning cgroup: ignore css_sets associated with dead cgroups during migration Documentation: cgroup v2: Trivial heading correction. cgroup: implement cgroup_subsys->implicit_on_dfl cgroup: use css_set->mg_dst_cgrp for the migration target cgroup cgroup: make cgroup[_taskset]_migrate() take cgroup_root instead of cgroup cgroup: move migration destination verification out of cgroup_migrate_prepare_dst() cgroup: fix incorrect destination cgroup in cgroup_update_dfl_csses() cgroup: Trivial correction to reflect controller. cgroup: remove stale item in cgroup-v1 document INDEX file. cgroup: update css iteration in cgroup_update_dfl_csses() cgroup: allocate 2x cgrp_cset_links when setting up a new root cgroup: make cgroup_calc_subtree_ss_mask() take @this_ss_mask cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends cgroup: use cgroup_apply_enable_control() in cgroup creation path cgroup: combine cgroup_mutex locking and offline css draining cgroup: factor out cgroup_{apply|finalize}_control() from cgroup_subtree_control_write() cgroup: introduce cgroup_{save|propagate|restore}_control() cgroup: make cgroup_drain_offline() and cgroup_apply_control_{disable|enable}() recursive cgroup: factor out cgroup_apply_control_enable() from cgroup_subtree_control_write() ... | 19 March 2016, 03:25:49 UTC |
| fe30937 | Eric Dumazet | 18 March 2016, 00:23:36 UTC | bonding: fix bond_get_stats() bond_get_stats() can be called from rtnetlink (with RTNL held) or from /proc/net/dev seq handler (with RCU held) The logic added in commit 5f0c5f73e5ef ("bonding: make global bonding stats more reliable") kind of assumed only one cpu could run there. If multiple threads are reading /proc/net/dev, stats can be really messed up after a while. A second problem is that some fields are 32bit, so we need to properly handle the wrap around problem. Given that RTNL is not always held, we need to use bond_for_each_slave_rcu(). Fixes: 5f0c5f73e5ef ("bonding: make global bonding stats more reliable") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Andy Gospodarek <gospo@cumulusnetworks.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 03:14:15 UTC |
| eee5772 | Eric Dumazet | 17 March 2016, 18:57:06 UTC | net: bcmgenet: fix dma api length mismatch When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 03:12:44 UTC |
| 76e39cc | Eli Cohen | 17 March 2016, 16:49:42 UTC | net/mlx4_core: Fix backward compatibility on VFs Commit 85743f1eb345 ("net/mlx4_core: Set UAR page size to 4KB regardless of system page size") introduced dependency where old VF drivers without this fix fail to load if the PF driver runs with this commit. To resolve this add a module parameter which disables that functionality by default. If both the PF and VFs are running with a driver with that commit the administrator may set the module param to true. The module parameter is called enable_4k_uar. Fixes: 85743f1eb345 ('net/mlx4_core: Set UAR page size to 4KB ...') Signed-off-by: Eli Cohen <eli@mellanox.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 03:09:45 UTC |
| fcab86a | Linus Torvalds | 19 March 2016, 03:06:46 UTC | Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - ahci grew runtime power management support so that the controller can be turned off if no devices are attached. - sata_via isn't dead yet. It got hotplug support and more refined workaround for certain WD drives. - Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing conflicts in ahci PCI ID table. * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_xgene: dereferencing uninitialized pointer in probe AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs ata: sata_rcar: Use ARCH_RENESAS sata_via: Implement hotplug for VT6421 sata_via: Apply WD workaround only when needed on VT6421 ahci: Add runtime PM support for the host controller ahci: Add functions to manage runtime PM of AHCI ports ahci: Convert driver to use modern PM hooks ahci: Cache host controller version scsi: Drop runtime PM usage count after host is added scsi: Set request queue runtime PM status back to active on resume block: Add blk_set_runtime_active() ata: ahci_mvebu: add support for Armada 3700 variant libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show() libata: support AHCI on OCTEON platform | 19 March 2016, 03:06:46 UTC |
| ef504fa | Linus Torvalds | 19 March 2016, 03:05:39 UTC | Merge branch 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: "Three trivial workqueue changes" * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fix comment for work_on_cpu() sched/core: Get rid of 'cpu' argument in wq_worker_sleeping() workqueue: Replace usage of init_name with dev_set_name() | 19 March 2016, 03:05:39 UTC |
| e2ad1f9 | Andreas Färber | 16 March 2016, 23:23:37 UTC | phy: mdio-thunder: Fix some Kconfig typos Drop two extra occurrences of "on" in option title and help text. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 03:02:03 UTC |
| a59f8c5 | Woojung Huh | 16 March 2016, 22:10:42 UTC | lan78xx: add ndo_get_stats64 Add lan78xx_get_stats64 of ndo_get_stats64 to report all statistics counters including errors from HW statistics. Read from HW when auto suspend is disabled, use saved counter when auto suspend is enabled because periodic call to ndo_get_stats64 prevents USB auto suspend. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:27:48 UTC |
| 20ff556 | Woojung Huh | 16 March 2016, 22:10:40 UTC | lan78xx: handle statistics counter rollover Update to handle statistics counter rollover. Check statistics counter periodically and compensate it when counter value rolls over at max (20 or 32bits). Simple mechanism adjusts monitoring timer to allow USB auto suspend. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:27:48 UTC |
| 814a2bf | Linus Torvalds | 19 March 2016, 02:26:54 UTC | Merge branch 'akpm' (patches from Andrew) Merge second patch-bomb from Andrew Morton: - a couple of hotfixes - the rest of MM - a new timer slack control in procfs - a couple of procfs fixes - a few misc things - some printk tweaks - lib/ updates, notably to radix-tree. - add my and Nick Piggin's old userspace radix-tree test harness to tools/testing/radix-tree/. Matthew said it was a godsend during the radix-tree work he did. - a few code-size improvements, switching to __always_inline where gcc screwed up. - partially implement character sets in sscanf * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) sscanf: implement basic character sets lib/bug.c: use common WARN helper param: convert some "on"/"off" users to strtobool lib: add "on"/"off" support to kstrtobool lib: update single-char callers of strtobool() lib: move strtobool() to kstrtobool() include/linux/unaligned: force inlining of byteswap operations include/uapi/linux/byteorder, swab: force inlining of some byteswap operations include/asm-generic/atomic-long.h: force inlining of some atomic_long operations usb: common: convert to use match_string() helper ide: hpt366: convert to use match_string() helper ata: hpt366: convert to use match_string() helper power: ab8500: convert to use match_string() helper power: charger_manager: convert to use match_string() helper drm/edid: convert to use match_string() helper pinctrl: convert to use match_string() helper device property: convert to use match_string() helper lib/string: introduce match_string() helper radix-tree tests: add test for radix_tree_iter_next radix-tree tests: add regression3 test ... | 19 March 2016, 02:26:54 UTC |
| 7fa7728 | David S. Miller | 19 March 2016, 02:25:46 UTC | Merge branch 'rds-buffer-tuning' Sowmini Varadhan says: ==================== RDS: TCP: tunable socket buffer parameters Patch 1 uses sysctl to create tunable socket buffer size parameters. Patch 2 removes an unuused constant. v2: use sysctl v3: review comments from Santosh Shilimkar, Eric Dumazet v4: review comments from Hannes Sowa ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:25:46 UTC |
| a3382e4 | Sowmini Varadhan | 16 March 2016, 18:38:13 UTC | RDS: TCP: Remove unused constant RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14d24f ("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune"). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:25:41 UTC |
| c6a58ff | Sowmini Varadhan | 16 March 2016, 18:38:12 UTC | RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket Add per-net sysctl tunables to set the size of sndbuf and rcvbuf on the kernel tcp socket. The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf. These values must be set before accept() or connect(), and there may be an arbitrary number of existing rds-tcp sockets when the tunable is modified. To make sure that all connections in the netns pick up the same value for the tunable, we reset existing rds-tcp connections in the netns, so that they can reconnect with the new parameters. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:25:41 UTC |
| 79d3b59 | Robert Jarzmik | 16 March 2016, 17:26:02 UTC | net: smc911x: convert pxa dma to dmaengine Convert the dma transfers to be dmaengine based, now pxa has a dmaengine slave driver. This makes this driver a bit more PXA agnostic. The driver was only compile tested. The risk is quite small as no current PXA platform I'm aware of is using smc911x driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:23:59 UTC |
| c9d0bc5 | David S. Miller | 19 March 2016, 02:14:53 UTC | Merge branch 'IFF_MULTICAST-dup-sets' Zhang Shengju says: ==================== remove duplicate set of flag IFF_MULTICAST This patch series remove duplicate set of flag IFF_MULTICAST. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:14:53 UTC |
| bc0df13 | Zhang Shengju | 16 March 2016, 09:59:16 UTC | team: remove duplicate set of flag IFF_MULTICAST Remove unnecessary set of flag IFF_MULTICAST, since ether_setup already does this. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:14:47 UTC |
| 1098cee | Zhang Shengju | 16 March 2016, 09:59:15 UTC | bonding: remove duplicate set of flag IFF_MULTICAST Remove unnecessary set of flag IFF_MULTICAST, since ether_setup already does this. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 March 2016, 02:14:47 UTC |
| 237045f | Linus Torvalds | 19 March 2016, 00:13:31 UTC | Merge branch 'for-4.6/drivers' of git://git.kernel.dk/linux-block Pull block driver updates from Jens Axboe: "This is the block driver pull request for this merge window. It sits on top of for-4.6/core, that was just sent out. This contains: - A set of fixes for lightnvm. One from Alan, fixing an overflow, and the rest from the usual suspects, Javier and Matias. - A set of fixes for nbd from Markus and Dan, and a fixup from Arnd for correct usage of the signed 64-bit divider. - A set of bug fixes for the Micron mtip32xx, from Asai. - A fix for the brd discard handling from Bart. - Update the maintainers entry for cciss, since that hardware has transferred ownership. - Three bug fixes for bcache from Eric Wheeler. - Set of fixes for xen-blk{back,front} from Jan and Konrad. - Removal of the cpqarray driver. It has been disabled in Kconfig since 2013, and we were initially scheduled to remove it in 3.15. - Various updates and fixes for NVMe, with the most important being: - Removal of the per-device NVMe thread, replacing that with a watchdog timer instead. From Christoph. - Exposing the namespace WWID through sysfs, from Keith. - Set of cleanups from Ming Lin. - Logging the controller device name instead of the underlying PCI device name, from Sagi. - And a bunch of fixes and optimizations from the usual suspects in this area" * 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits) NVMe: Expose ns wwid through single sysfs entry drivers:block: cpqarray clean up brd: Fix discard request processing cpqarray: remove it from the kernel cciss: update MAINTAINERS NVMe: Remove unused sq_head read in completion path bcache: fix cache_set_flush() NULL pointer dereference on OOM bcache: cleaned up error handling around register_cache() bcache: fix race of writeback thread starting before complete initialization NVMe: Create discard zero quirk white list nbd: use correct div_s64 helper mtip32xx: remove unneeded variable in mtip_cmd_timeout() lightnvm: generalize rrpc ppa calculations lightnvm: remove struct nvm_dev->total_blocks lightnvm: rename ->nr_pages to ->nr_sects lightnvm: update closed list outside of intr context xen/blback: Fit the important information of the thread in 17 characters lightnvm: fold get bb tbl when using dual/quad plane mode lightnvm: fix up nonsensical configure overrun checking xen-blkback: advertise indirect segment support earlier ... | 19 March 2016, 00:13:31 UTC |
| 35d88d9 | Linus Torvalds | 18 March 2016, 23:43:11 UTC | Merge branch 'for-4.6/core' of git://git.kernel.dk/linux-block Pull core block updates from Jens Axboe: "Here are the core block changes for this merge window. Not a lot of exciting stuff going on in this round, most of the changes have been on the driver side of things. That pull request is coming next. This pull request contains: - A set of fixes for chained bio handling from Christoph. - A tag bounds check for blk-mq from Hannes, ensuring that we don't do something stupid if a device reports an invalid tag value. - A set of fixes/updates for the CFQ IO scheduler from Jan Kara. - A set of blk-mq fixes from Keith, adding support for dynamic hardware queues, and fixing init of max_dev_sectors for stacking devices. - A fix for the dynamic hw context from Ming. - Enabling of cgroup writeback support on a block device, from Shaohua" * 'for-4.6/core' of git://git.kernel.dk/linux-block: blk-mq: add bounds check on tag-to-rq conversion block: bio_remaining_done() isn't unlikely block: cleanup bio_endio block: factor out chained bio completion block: don't unecessarily clobber bi_error for chained bios block-dev: enable writeback cgroup support blk-mq: Fix NULL pointer updating nr_requests blk-mq: mark request queue as mq asap block: Initialize max_dev_sectors to 0 blk-mq: dynamic h/w context count cfq-iosched: Allow parent cgroup to preempt its child cfq-iosched: Allow sync noidle workloads to preempt each other cfq-iosched: Reorder checks in cfq_should_preempt() cfq-iosched: Don't group_idle if cfqq has big thinktime | 18 March 2016, 23:43:11 UTC |
| 93e68cd | Zhang Shengju | 16 March 2016, 09:12:46 UTC | net: fix a comment typo Fix a comment typo. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:40:27 UTC |
| 3af0d55 | Dan Carpenter | 16 March 2016, 07:45:10 UTC | ethernet: micrel: fix some error codes There were two issues here: 1) dma_mapping_error() return true/false but we want to return -ENOMEM 2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but presumably that should be -ENOMEM as well. I changed the success path to "return 0;" instead of "return ret;" for clarity. Fixes: 94fe8c683cea ('ks8842: Support DMA when accessed via timberdale') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:39:54 UTC |
| 3004932 | David S. Miller | 18 March 2016, 23:38:53 UTC | Merge branch 'bpf-misc' Daniel Borkmann says: ==================== Minor BPF follow-ups Some minor last follow-ups I still had in my queue. The first one adds readability support for __sk_buff's tc_classid member, the remaining two are some minor cleanups. For details please see individual patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:38:53 UTC |
| fca5fdf | Daniel Borkmann | 16 March 2016, 00:42:51 UTC | ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX for this, which makes the code a bit more generic and allows to remove BPF_TUNLEN_MAX from eBPF code. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:38:46 UTC |
| 808c1b6 | Daniel Borkmann | 16 March 2016, 00:42:50 UTC | bpf, dst: add and use dst_tclassid helper We can just add a small helper dst_tclassid() for retrieving the dst->tclassid value. It makes the code a bit better in that we can get rid of the ifdef from filter.c by moving this into the header. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:38:46 UTC |
| 09c37a2 | Daniel Borkmann | 16 March 2016, 00:42:49 UTC | bpf: make skb->tc_classid also readable Currently, the tc_classid from eBPF skb context is write-only, but there's no good reason for tc programs to limit it to write-only. For example, it can be used to transfer its state via tail calls where the resulting tc_classid gets filled gradually. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:38:46 UTC |
| 019ded3 | Arnd Bergmann | 15 March 2016, 21:47:14 UTC | net: mvneta: bm: clarify dependencies MVNETA_BM has a dependency on MVNETA, so we can only select the former if the latter is enabled. However, the code dependency is the reverse: The mvneta module can call into the mvneta_bm module, so mvneta cannot be a built-in if mvneta_bm is a module, or we get a link error: drivers/net/built-in.o: In function `mvneta_remove': drivers/net/ethernet/marvell/mvneta.c:4211: undefined reference to `mvneta_bm_pool_destroy' drivers/net/built-in.o: In function `mvneta_bm_update_mtu': drivers/net/ethernet/marvell/mvneta.c:1034: undefined reference to `mvneta_bm_bufs_free' This avoids the problem by further clarifying the dependency so that MVNETA_BM is a silent Kconfig option that gets turned on by the new MVNETA_BM_ENABLE option. This way both the core HWBM module and the MVNETA_BM code are always built-in when needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:36:48 UTC |
| 3a461da | Daniel Borkmann | 15 March 2016, 21:41:22 UTC | cls_bpf: reset class and reuse major in da There are two issues with the current code. First one is that we need to set res->class to 0 in case we use non-default classid matching. This is important for the case where cls_bpf was initially set up with an optional binding to a default class with tcf_bind_filter(), where the underlying qdisc implements bind_tcf() that fills res->class and tests for it later on when doing the classification. Convention for these cases is that after tc_classify() was called, such qdiscs (atm, drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup based on classid. Second, there's a bug with da mode, where res->classid is only assigned a 16 bit minor, but it needs to expand to the full 32 bit major/minor combination instead, therefore we need to expand with the bound major. This is fine as classes belonging to a classful qdisc must share the same major. Fixes: 045efa82ff56 ("cls_bpf: introduce integrated actions") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:35:21 UTC |
| 70063e9 | David S. Miller | 18 March 2016, 23:33:05 UTC | Merge branch 'ldmvsw' Aaron Young says: ==================== ldmvsw: Add ldmvsw driver This series adds a new Logical Domains vSwitch (ldmvsw) driver. The ldmvsw driver code will live in the drivers/net/ethernet/sun/ directory and will operate on Oracle systems running SPARC Linux in a Logical Domains environment (typically in the control domain). The ldmvsw driver is very similar in function to the existing sunvnet driver. Ldmvsw creates a network interface for each "vsw-port" node found in the Machine Description (MD) of a service domain. These nodes correspond to ports on a vswitch created by the logical domains manager. The created network interface(s) can be used by bridge/vswitch software (such as the Linux bridge or Open vSwitch) to provide guest domain(s) with network interconnectivity or connectivity to a physical network. Here is a example diagram of ldmvsw driver usage in a logical domain environment to provide a guest domain with network connectivity to a physical NIC on the service domain: +----------------+ +----------------- | Service Domain | | Guest domain | | | | | | LinuxBridge | | | | | | | | | | NIC Ldmvsw | | Sunvnet | +----------------+ +----------------+ | | LDC | LAN ------------------------------ As stated, the sunvnet and ldmvsw drivers are _very_ similar in function. They both create network interface(s) to receive/transmit network traffic across LDC network channel(s). Since the driver is so similar in function to sunvnet, the approach will be as follows to integrate the driver and take advantage of common code: Patch #1: Split sunvnet.c driver into sunvnet.c and sunvnet_common.c Patch #2: Modify the sunvnet_common code and data structures to be compatible with both the sunvnet and ldmvsw drivers. Patch #3: Add the new ldmvsw.c driver code Patch #4: Checkpatch cleanup of the sunvnet/sunvnet_common code. NOTE - Patch#1 renames a file (sunvnet.h -> sunvnet_common.h). When generating the patches (using git format-patch), I had to use the --no-renames option otherwise patch#1 would NOT apply using 'patch -p1' - which as I understand is a requirement for patch acceptance. I wasn't sure if this is proper thing to do. Please advise if not. Thanks. v2 changes: * change all EXPORT_SYMBOL declarations to EXPORT_SYMBOL_GPL * remove inline attribute for external function port_is_up_common() * Give all exported/global funcs in sunvnet_common.c a 'sunvnet_' prefix to avoid kernel global namespace pollution/collisions * ldmvsw.c: Order local variable declarations from longest to shortest line * ldmvsw.c: register the netdevice after all supporting state is ready/setup. NOTE: The consensus at Oracle is that the following functions must be done AFTER register_netdev() - this is the same ordering currently used in the sunvnet driver: 1. sunvnet_port_add_txq_common() - needs registered netdev 2. napi_enable() - requires registered netdev 3. vio_port_up() - as soon as this function is called LDC handshake messages will come in which must be handled by the napi code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:33:05 UTC |
| dc153f8 | Aaron Young | 15 March 2016, 18:35:40 UTC | ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c Checkpatch updates for sunvnet.c and sunvnet_common.c. Signed-off-by: Aaron Young <aaron.young@oracle.com> Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:33:01 UTC |
| 5d01fa0 | Aaron Young | 15 March 2016, 18:35:39 UTC | ldmvsw: Add ldmvsw.c driver code Add ldmvsw.c driver Details: The ldmvsw driver very closely follows the sunvnet.c code and makes use of the sunvnet_common.c code for core functionality. A significant difference between sunvnet and ldmvsw driver is sunvnet creates a network interface for each vnet-port *parent* node in the MD while the ldmvsw driver creates a network interface for every vsw-port node in the Machine Description (MD). Therefore the netdev_priv() for sunvnet is a vnet structure while the netdev_priv() for ldmvsw is a vnet_port structure. Vnet_port structures allocated by ldmvsw have the vsw bit set. When finding the net_device associated with a port, the common code keys off this bit to use either the net_device found in the vnet_port or the net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in sunvnet_common.h). This scheme allows the common code to work with both drivers with minimal changes. Similar to Xen, network interfaces created by the ldmvsw driver will always have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be assigned the devname "vif<cfg_handle>.<port_id>" - where <cfg_handle> and <port_id> are a unique handle/port pair assigned to the associated vsw-port node in the MD. Signed-off-by: Aaron Young <aaron.young@oracle.com> Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:33:00 UTC |
| 67d0719 | Aaron Young | 15 March 2016, 18:35:38 UTC | ldmvsw: Make sunvnet_common compatible with ldmvsw Modify sunvnet common code and data structures to be compatible with both sunvnet and ldmvsw drivers. Details: Sunvnet operates on "vnet-port" nodes which appear in the Machine Description (MD) in a guest domain. Ldmvsw operates on "vsw-port" nodes which appear in the MD of a service domain. A difference between the sunvnet driver and the ldmvsw driver is the sunvnet driver creates a network interface (i.e. a struct net_device) for every vnet-port *parent* "network" node. Several vnet-ports may appear under this common parent network node - each corresponding to a common parent network interface. Conversely, since bridge/vswitch software will need to interface with every vsw-port in a system, the ldmvsw driver creates a network interface (i.e. a struct net_device) for every vsw-port - not every parent node as with sunvnet. This difference required some special handling in the common code as explained below. There are 2 key data structures used by the sunvnet and ldmvsw drivers (which are now found in sunvnet_common.h): 1. struct vnet_port This structure represents a vnet-port node in sunvnet and a vsw-port in the ldmvsw driver. 2. struct vnet This structure represents a parent "network" node in sunvnet and a parent "virtual-network-switch" node in ldmvsw. Since the sunvnet driver allocates a net_device for every parent "network" node, a net_device member appears in the struct vnet. Since the ldmvsw driver allocates a net_device for every port, a net_device member was added to the vnet_port. The common code distinguishes which structure net_device member to use by checking a 'vsw' bit that was added to the vnet_port structure. See the VNET_PORT_TO_NET_DEVICE() marco in sunvnet_common.h. The netdev_priv() in sunvnet is allocated as a vnet. The netdev_priv() in ldmvsw is a vnet_port. Therefore, any place in the common code where a netdev_priv() call was made, a wrapper function was implemented in each driver to first get the vnet and/or vnet_port (in a driver specific way) and pass them as newly added parameters to the common functions (see wrapper funcs: vnet_set_rx_mode() and vnet_poll_controller()). Since these wrapper functions call __tx_port_find(), __tx_port_find() was moved from the common code back into sunvnet.c. Note - ldmvsw.c does not require this function. These changes also required that port_is_up() be made into a common function and thus it was given a _common suffix and exported like the other common functions. A wrapper function was also added for vnet_start_xmit_common() to pass a driver-specific function arg to return the port associated with a given struct sk_buff and struct net_device. This was required because vnet_start_xmit_common() grabs a lock prior to getting the associated port. Using a function pointer arg allowed the code to work unchanged without risking changes to the non-trivial locking logic in vnet_start_xmit_common(). Signed-off-by: Aaron Young <aaron.young@oracle.com> Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:33:00 UTC |
| 31762ea | Aaron Young | 15 March 2016, 18:35:37 UTC | ldmvsw: Split sunvnet driver into common code Split sunvnet.c into sunvnet.c and sunvnet_common.c. Details: Since the sunvnet and ldmvsw drivers will both use common sunvnet code, move the functions (and support functions) anticipated to be common code from sunvnet.c to sunvnet_common.c. Similarly, sunvnet.h was renamed to sunvnet_common.h. The sunvnet_common.c code will be compiled into the kernel and act as a library of functions that are linked by either (or both) drivers when loaded. Function names for external functions in sunvnet_common.c (to be called by both the sunvnet and ldmvsw drivers) were tagged with a "_common" suffix to clearly designate them as common functions. No functional changes as of yet... just moved code verbatim to the new sunvnet_common.c/h files. Makefile/Kconfig support added to build sunvnet_common.c file. The code is included in the kernel if SUN_LDOMS is defined/selected. NOTE - per the SubmittingPatches documentation, since the code was just moved from one file another, the code was NOT checkpatch'd in this commit to aid in review. Signed-off-by: Aaron Young <aaron.young@oracle.com> Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com> Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:33:00 UTC |
| 040e3ab | Linus Torvalds | 18 March 2016, 23:19:15 UTC | Merge tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a USB fix for the reported issue with commit 69bec7259853 ("USB: core: let USB device know device node") as well as some other issues that have been reported so far with this merge window" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: uas: Reduce can_queue to MAX_CMNDS USB: cdc-acm: more sanity checking USB: usb_driver_claim_interface: add sanity checking usb/core: usb_alloc_dev(): fix setting of ->portnum USB: iowarrior: fix oops with malicious USB descriptors | 18 March 2016, 23:19:15 UTC |
| 1e6bb1a | Yuval Mintz | 15 March 2016, 17:52:04 UTC | bnx2x: Prevent false warning for lack of FC NPIV Not all adapters have FC-NPIV configured. If bnx2fc is used with such an adapter, driver would read irrelevant data from the the nvram and log "FC-NPIV table with bad length..." In system logs. Simply accept that reading '0' as the feature offset in nvram indicates the feature isn't there and return. Reported-by: Andrew Patterson <andrew.patterson@hpe.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:17:16 UTC |
| 38c848c | Yoshihiro Kaneko | 15 March 2016, 15:52:16 UTC | ravb: fix result value overwrite The result value is overwritten by a return value of ravb_ptp_interrupt(). Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:16:33 UTC |
| 2c9a266 | Manish Chopra | 15 March 2016, 11:13:45 UTC | qlge: Fix receive packets drop. When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 23:15:50 UTC |
| cc2fa61 | Phil Reid | 15 March 2016, 07:34:33 UTC | net: stmmac: Don't search for phys if mdio node is defined. If a dt mdio entry has been added least assume that we wont search for phys attached. The DT and of_mdiobus_register already do this. This stops DSA phys being found and phys created for them, as this is handled by the DSA driver. Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 22:29:23 UTC |
| 48e7742 | Dan Carpenter | 15 March 2016, 07:19:04 UTC | mediatek: unlock on error in mtk_tx_map() There was a missing unlock on the error path. Fixes: 656e705243fd ('net-next: mediatek: add support for MT7623 ethernet') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 22:28:11 UTC |
| 977bc20 | Dan Carpenter | 15 March 2016, 07:18:49 UTC | mediatek: checking for IS_ERR() instead of NULL of_phy_connect() returns NULL on error, it never returns error pointers. Fixes: 656e705243fd ('net-next: mediatek: add support for MT7623 ethernet') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 22:28:11 UTC |
| fe3a5f6 | Simon Horman | 15 March 2016, 03:00:35 UTC | openvswitch: allow output of MPLS packets on tunnel vports Currently output of MPLS packets on tunnel vports is not allowed by Open vSwitch. This is because historically encapsulation was done in such a way that the inner_protocol field of the skb needed to hold the inner protocol for both MPLS and tunnel encapsulation in order for GSO segmentation to be performed correctly. Since b2acd1dc3949 ("openvswitch: Use regular GRE net_device instead of vport") Open vSwitch makes use of lwt to output to tunnel netdevs which perform encapsulation. As no drivers expose support for MPLS offloads this means that GSO packets are segmented in software by validate_xmit_skb(), which is called from __dev_queue_xmit(), before tunnel encapsulation occurs. This means that the inner protocol of MPLS is no longer needed by the time encapsulation occurs and the contention on the inner_protocol field of the skb no longer occurs. Thus it is now safe to output MPLS to tunnel vports. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 22:26:38 UTC |
| d07a147 | David Daney | 15 March 2016, 00:57:08 UTC | netdev: Move octeon/octeon_mgmt driver to cavium directory. No code changes. Since OCTEON is a Cavium product, move the driver to the vendor directory to unclutter things a bit. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 22:25:30 UTC |
| e014e84 | Wu Fengguang | 18 March 2016, 16:54:50 UTC | ovs: internal_set_rx_headroom() can be static Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 21:50:36 UTC |
| b73f96f | Wu Fengguang | 18 March 2016, 15:27:28 UTC | net: dst_cache_per_cpu_dst_set() can be static Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 21:45:08 UTC |
| 8b23a8c | Al Viro | 18 March 2016, 20:07:38 UTC | Merge branches 'work.lookups', 'work.misc' and 'work.preadv2' into for-next | 18 March 2016, 20:07:38 UTC |
| d6785d9 | Rabin Vincent | 10 March 2016, 20:19:06 UTC | splice: handle zero nr_pages in splice_to_pipe() Running the following command: busybox cat /sys/kernel/debug/tracing/trace_pipe > /dev/null with any tracing enabled pretty very quickly leads to various NULL pointer dereferences and VM BUG_ON()s, such as these: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8119df6c>] generic_pipe_buf_release+0xc/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cbee>] entry_SYSCALL_64_fastpath+0x12/0x6d page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) kernel BUG at include/linux/mm.h:367! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC RIP: [<ffffffff8119df9c>] generic_pipe_buf_release+0x3c/0x40 Call Trace: [<ffffffff811c48a3>] splice_direct_to_actor+0x143/0x1e0 [<ffffffff811c42e0>] ? generic_pipe_buf_nosteal+0x10/0x10 [<ffffffff811c49cf>] do_splice_direct+0x8f/0xb0 [<ffffffff81196869>] do_sendfile+0x199/0x380 [<ffffffff81197600>] SyS_sendfile64+0x90/0xa0 [<ffffffff8192cd1e>] tracesys_phase2+0x84/0x89 (busybox's cat uses sendfile(2), unlike the coreutils version) This is because tracing_splice_read_pipe() can call splice_to_pipe() with spd->nr_pages == 0. spd_pages underflows in splice_to_pipe() and we fill the page pointers and the other fields of the pipe_buffers with garbage. All other callers of splice_to_pipe() avoid calling it when nr_pages == 0, and we could make tracing_splice_read_pipe() do that too, but it seems reasonable to have splice_to_page() handle this condition gracefully. Cc: stable@vger.kernel.org Signed-off-by: Rabin Vincent <rabin@rab.in> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 18 March 2016, 20:06:44 UTC |
| f7813ad | Linus Torvalds | 18 March 2016, 17:21:04 UTC | Merge tag 'for-linus-4.6' of git://git.code.sf.net/p/openipmi/linux-ipmi Pull IPMI updates from Corey Minyard: "Just some minor fixes, nothing big" * tag 'for-linus-4.6' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: do not probe ACPI devices if si_tryacpi is unset ipmi_si: Avoid a wrong long timeout on transaction done ipmi_si: Fix module parameter doc names ipmi_ssif: Fix logic around alert handling | 18 March 2016, 17:21:04 UTC |
| 12e7b0a | Linus Torvalds | 18 March 2016, 17:15:11 UTC | Merge tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Freescale Touch Screen ADC - X-Powers AXP PMIC with RSB - TI TPS65086 Power Management IC (PMIC) New Device Support: - Supply device PCI IDs for Intel Broxton Fix-ups: - Move to clkdev_create() API; intel_quark_i2c_gpio - Complete re-write of TI's TPS65912 Power Management IC (PMIC) - Remove unnecessary function argument; axp20x - Separate out bus related code; axp20x - Coding Style changes; axp20x - Allow more drivers to be compiled as modules - Work around false positive 'used uninitialised' warning; db8500-prcmu Bug Fixes: - Remove do_div(); fsl-imx25-gcq - Fix driver init when built-in; tps65010 - Fix clock-unregister leak; intel-lpss" * tag 'mfd-for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits) mfd: intel-lpss: Pass I2C configuration via properties on BXT mfd: imx6sx: Add PCIe register definitions for iomuxc gpr mfd: ipaq-micro: Use __maybe_unused to hide pm functions mfd: max77686: Add max77802 to I2C device ID table mfd: max77686: Export OF module alias information mfd: max77686: Allow driver to be built as a module mfd: stmpe: Add the proper PWM resources mfd: tps65090: Set regmap config reg counts properly mfd: syscon: Return ENOTSUPP instead of ENOSYS when disabled mfd: as3711: Set regmap config reg counts properly mfd: rc5t583: Set regmap config reg counts properly gpio: tps65086: Add GPO driver for the TPS65086 PMIC mfd: mt6397: Add platform device ID table mfd: da9063: Fix missing volatile registers in the core regmap_range volatile lists mfd: mt6397: Add MT6323 support to MT6397 driver mfd: mt6397: Add support for different Slave types mfd: mt6397: int_con and int_status may vary in location dt-bindings: mfd: Add bindings for the MediaTek MT6323 PMIC mfd: da9062: Fix missing volatile registers in the core regmap_range volatile lists mfd: Add documentation for ACT8945A DT bindings ... | 18 March 2016, 17:15:11 UTC |
| 021f163 | Linus Torvalds | 18 March 2016, 17:05:46 UTC | Merge tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "After a heavy storm by syzkaller in 4.5 cycle, we have relatively few changes in the core at this time while a lot of changes are found in the driver side, unsurprisingly. Below are some highlights: ALSA core: - A few more hardening in ALSA timer codes - An extension of sequencer API for advertising the card / pid - Small fixes in compress-offload and jack layers HD-audio: - Dynamic PCM assignment in HDMI/DP codec; preparation for upcoming DP-MST support - Lots of code refactoring for sharing with ASoC SKL driver - Regression fixes for Intel HDMI/DP - Fixups for CX20724 codec, Lenovo AiO USB-audio: - Add quirk_alias option to make quirk debugging easier - Fixes for possible Oops by malformed firmware Firewire: - Add support for FW-1804 in tascam driver - Improvements / changes in card registration, multi stream handling, etc for DICE - Lots of code refactoring ASoC: - Enhancements of still ongoing topology API - Lots of commits for Intel Skylake support including HDMI support - A few Intel Atom driver updates for recent devices - Lots of improvements to the Renesas drivers - Capture support for Qualcomm drivers - Support for TI DaVinci DRA7xxx devices - New machine drivers for Freescale systems with Cirrus CODECs, Mediatek systems with RT5650 CODECs - New CPU drivers for Allwinner S/PDIF controllers - New CODEC drivers for Maxim MAX9867 and MAX98926 and Realtek RT5514" * tag 'sound-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (291 commits) ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug ALSA: ctl: change return value in compatibility layer so that it's the same value in core implementation ALSA: mixart: silence an uninitialized variable warning ALSA: usb-audio: Add sanity checks for endpoint accesses ALSA: usb-audio: Minor code cleanup in create_fixed_stream_quirk() ALSA: usb-audio: Fix NULL dereference in create_fixed_stream_quirk() ALSA: hda - Limit i915 HDMI binding only for HSW and later ALSA: hda - Fix unconditional GPIO toggle via automute ALSA: mixart: silence unitialized variable warnings ALSA: hda - Fixes double fault in nvhdmi_chmap_cea_alloc_validate_get_type ALSA: intel8x0: Add clock quirk entry for AD1981B on IBM ThinkPad X41. ALSA: hda - Add new GPU codec ID 0x10de0082 to snd-hda ASoC: rsnd: add simplified module explanation ASoC: hdac_hdmi: Add broxton device ID ASoC: Intel: Bxtn: Add Broxton PCI ID ASoC: Intel: Skylake: Move Skylake dsp ops & loader ops ASoC: Intel: add dmabuffer to common sst_dsp ASoC: Intel: Skylake: Unstatify skl_dsp_enable_core ASoC: Intel: Skylake: Fix whitepsace issues ASoC: Intel: Skylake: Move module id defines ... | 18 March 2016, 17:05:46 UTC |
| 9ea4463 | Linus Torvalds | 18 March 2016, 16:39:22 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.6 merge window patches. This is the first of two pull requests. It is the smaller request, but touches for more different things (this is everything but what is in or going into staging). The pull request for the code in staging/rdma is on hold until after we decide what to do on the write/writev API issue and may be partially deferred until 4.7 as a result. Summary: - cxgb4 updates - nes updates - unification of iwarp portmapper code to core - add drain_cq API - various ib_core updates - minor ipoib updates - minor mlx4 updates - more significant mlx5 updates (including a minor merge conflict with net-next tree...merge is simple to resolve and Stephen's resolution was confirmed by Mellanox) - trivial net/9p rdma conversion - ocrdma RoCEv2 update - srpt updates" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (85 commits) iwpm: crash fix for large connections test iw_cxgb3: support for iWARP port mapping iw_cxgb4: remove port mapper related code iw_nes: remove port mapper related code iwcm: common code for port mapper net/9p: convert to new CQ API IB/mlx5: Add support for don't trap rules net/mlx5_core: Introduce forward to next priority action net/mlx5_core: Create anchor of last flow table iser: Accept arbitrary sg lists mapping if the device supports it mlx5: Add arbitrary sg list support IB/core: Add arbitrary sg_list support IB/mlx5: Expose correct max_fast_reg_page_list_len IB/mlx5: Make coding style more consistent IB/mlx5: Convert UMR CQ to new CQ API IB/ocrdma: Skip using unneeded intermediate variable IB/ocrdma: Skip using unneeded intermediate variable IB/ocrdma: Delete unnecessary variable initialisations in 11 functions IB/core: Documentation fix in the MAD header file IB/core: trivial prink cleanup. ... | 18 March 2016, 16:39:22 UTC |
| 55ff8cf | Hans de Goede | 07 March 2016, 19:11:52 UTC | USB: uas: Reduce can_queue to MAX_CMNDS The uas driver can never queue more then MAX_CMNDS (- 1) tags and tags are shared between luns, so there is no need to claim that we can_queue some random large number. Not claiming that we can_queue 65536 commands, fixes the uas driver failing to initialize while allocating the tag map with a "Page allocation failure (order 7)" error on systems which have been running for a while and thus have fragmented memory. Cc: stable@vger.kernel.org Reported-and-tested-by: Yves-Alexis Perez <corsac@corsac.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 March 2016, 16:19:02 UTC |
| 8835ba4 | Oliver Neukum | 15 March 2016, 09:14:04 UTC | USB: cdc-acm: more sanity checking An attack has become available which pretends to be a quirky device circumventing normal sanity checks and crashes the kernel by an insufficient number of interfaces. This patch adds a check to the code path for quirky devices. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 March 2016, 16:19:02 UTC |
| 0b818e3 | Oliver Neukum | 16 March 2016, 12:26:17 UTC | USB: usb_driver_claim_interface: add sanity checking Attacks that trick drivers into passing a NULL pointer to usb_driver_claim_interface() using forged descriptors are known. This thwarts them by sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 March 2016, 16:19:02 UTC |
| 7222c83 | Nicolai Stange | 17 March 2016, 22:53:02 UTC | usb/core: usb_alloc_dev(): fix setting of ->portnum With commit 69bec7259853 ("USB: core: let USB device know device node"), the port1 argument of usb_alloc_dev() gets overwritten as follows: ... usb_alloc_dev(..., unsigned port1) { ... if (!parent->parent) { port1 = usb_hcd_find_raw_port_number(..., port1); } ... } Later on, this now overwritten port1 gets assigned to ->portnum: dev->portnum = port1; However, since xhci_find_raw_port_number() isn't idempotent, the aforementioned commit causes a number of KASAN splats like the following: BUG: KASAN: slab-out-of-bounds in xhci_find_raw_port_number+0x98/0x170 at addr ffff8801d9311670 Read of size 8 by task kworker/2:1/87 [...] Workqueue: usb_hub_wq hub_event 0000000000000188 000000005814b877 ffff8800cba17588 ffffffff8191447e 0000000041b58ab3 ffffffff82a03209 ffffffff819143a2 ffffffff82a252f4 ffff8801d93115e0 0000000000000188 ffff8801d9311628 ffff8800cba17588 Call Trace: [<ffffffff8191447e>] dump_stack+0xdc/0x15e [<ffffffff819143a2>] ? _atomic_dec_and_lock+0xa2/0xa2 [<ffffffff814e2cd1>] ? print_section+0x61/0xb0 [<ffffffff814e4939>] print_trailer+0x179/0x2c0 [<ffffffff814f0d84>] object_err+0x34/0x40 [<ffffffff814f4388>] kasan_report_error+0x2f8/0x8b0 [<ffffffff814eb91e>] ? __slab_alloc+0x5e/0x90 [<ffffffff812178c0>] ? __lock_is_held+0x90/0x130 [<ffffffff814f5091>] kasan_report+0x71/0xa0 [<ffffffff814ec082>] ? kmem_cache_alloc_trace+0x212/0x560 [<ffffffff81d99468>] ? xhci_find_raw_port_number+0x98/0x170 [<ffffffff814f33d4>] __asan_load8+0x64/0x70 [<ffffffff81d99468>] xhci_find_raw_port_number+0x98/0x170 [<ffffffff81db0105>] xhci_setup_addressable_virt_dev+0x235/0xa10 [<ffffffff81d9ea51>] xhci_setup_device+0x3c1/0x1430 [<ffffffff8121cddd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81d9fac0>] ? xhci_setup_device+0x1430/0x1430 [<ffffffff81d9fad3>] xhci_address_device+0x13/0x20 [<ffffffff81d2081a>] hub_port_init+0x55a/0x1550 [<ffffffff81d28705>] hub_event+0xef5/0x24d0 [<ffffffff81d27810>] ? hub_port_debounce+0x2f0/0x2f0 [<ffffffff8195e1ee>] ? debug_object_deactivate+0x1be/0x270 [<ffffffff81210203>] ? print_rt_rq+0x53/0x2d0 [<ffffffff8121657d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8226acfb>] ? _raw_spin_unlock_irqrestore+0x5b/0x60 [<ffffffff81250000>] ? irq_domain_set_hwirq_and_chip+0x30/0xb0 [<ffffffff81256339>] ? debug_lockdep_rcu_enabled+0x39/0x40 [<ffffffff812178c0>] ? __lock_is_held+0x90/0x130 [<ffffffff81196877>] process_one_work+0x567/0xec0 [...] Afterwards, xhci reports some functional errors: xhci_hcd 0000:00:14.0: ERROR: unexpected setup address command completion code 0x11. xhci_hcd 0000:00:14.0: ERROR: unexpected setup address command completion code 0x11. usb 4-3: device not accepting address 2, error -22 Fix this by not overwriting the port1 argument in usb_alloc_dev(), but storing the raw port number as required by OF in an additional variable, raw_port. Fixes: 69bec7259853 ("USB: core: let USB device know device node") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 March 2016, 16:19:02 UTC |
| 4ec0ef3 | Josh Boyer | 14 March 2016, 14:42:38 UTC | USB: iowarrior: fix oops with malicious USB descriptors The iowarrior driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. The full report of this issue can be found here: http://seclists.org/bugtraq/2016/Mar/87 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 18 March 2016, 16:19:02 UTC |
| 5027e19 | Fabio Estevam | 04 March 2016, 22:12:01 UTC | of: Add vendor prefix for eGalax_eMPIA Technology Inc eGalax_eMPIA Technology Inc (EETI) is a company specialized in touchscreen controller solutions. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> | 18 March 2016, 14:38:22 UTC |
| 9f0257b | Joe Lawrence | 18 February 2016, 21:02:54 UTC | ipmi: do not probe ACPI devices if si_tryacpi is unset Extend the tryacpi module parameter to turn off acpi_ipmi_probe such that hard-coded options (type, ports, address, etc.) have complete control over the smi_info data structures setup by the driver. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> | 18 March 2016, 12:01:24 UTC |
| d9dffd2 | Corey Minyard | 25 January 2016, 22:11:20 UTC | ipmi_si: Avoid a wrong long timeout on transaction done Under some circumstances, the IPMI state machine could return a call without delay option but the driver would still do a long delay because the result wasn't checked. Instead of calling the state machine after transaction done, just go back to the top of the processing to start over. Signed-off-by: Corey Minyard <cminyard@mvista.com> | 18 March 2016, 12:01:23 UTC |
| f813655 | Corey Minyard | 19 January 2016, 20:51:53 UTC | ipmi_si: Fix module parameter doc names Several were tryacpi instead of their actual values. Signed-off-by: Corey Minyard <cminyard@mvista.com> | 18 March 2016, 12:01:23 UTC |
| 21c8f91 | Corey Minyard | 06 January 2016, 15:32:06 UTC | ipmi_ssif: Fix logic around alert handling There was a mistake in the logic, if an alert came in very quickly it would hang the driver. Signed-off-by: Corey Minyard <cminyard@mvista.com> | 18 March 2016, 12:01:23 UTC |
| 9dffdb3 | Linus Torvalds | 18 March 2016, 05:13:41 UTC | Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ... | 18 March 2016, 05:13:41 UTC |
| 10fdfee | Linus Torvalds | 18 March 2016, 04:51:52 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The most notable item is addition of support for Synaptics RMI4 protocol which is native protocol for all current Synaptics devices (touchscreens, touchpads). In later releases we'll switch devices using HID and PS/2 protocol emulation to RMI4. You will also get: - BYD PS/2 touchpad protocol support for psmouse - MELFAS MIP4 Touchscreen driver - rotary encoder was moved away from legacy platform data and to generic device properties API, devm_* API, and can now handle encoders using more than 2 GPIOs - Cypress touchpad driver was switched to devm_* API and device properties - other assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props Input: synaptics-rmi4 - using logical instead of bitwise AND Input: powermate - fix oops with malicious USB descriptors Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle() MAINTAINERS: add devicetree bindings to Input Drivers section Input: synaptics-rmi4 - add device tree support to the SPI transport driver Input: synaptics-rmi4 - add SPI transport driver Input: synaptics-rmi4 - add support for F30 Input: synaptics-rmi4 - add support for F12 Input: synaptics-rmi4 - add device tree support for 2d sensors and F11 Input: synaptics-rmi4 - add support for 2D sensors and F11 Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices Input: synaptics-rmi4 - add I2C transport driver Input: synaptics-rmi4 - add support for Synaptics RMI4 devices Input: ad7879 - add device tree support Input: ad7879 - fix default x/y axis assignment Input: ad7879 - move header to platform_data directory Input: ts4800 - add hardware dependency Input: cyapa - fix for losing events during device power transitions Input: sh_keysc - remove dependency on SUPERH ... | 18 March 2016, 04:51:52 UTC |
| 0f49fc9 | Linus Torvalds | 18 March 2016, 04:46:32 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching update from Jiri Kosina: - cleanup of module notifiers; this depends on a module.c cleanup which has been acked by Rusty; from Jessica Yu - small assorted fixes and MAINTAINERS update * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch/module: remove livepatch module notifier modules: split part of complete_formation() into prepare_coming_module() livepatch: Update maintainers livepatch: Fix the error message about unresolvable ambiguity klp: remove CONFIG_LIVEPATCH dependency from klp headers klp: remove superfluous errors in asm/livepatch.h | 18 March 2016, 04:46:32 UTC |
| 49dc2b7 | Linus Torvalds | 18 March 2016, 04:38:27 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: drivers/rtc: broken link fix drm/i915 Fix typos in i915_gem_fence.c Docs: fix missing word in REPORTING-BUGS lib+mm: fix few spelling mistakes MAINTAINERS: add git URL for APM driver treewide: Fix typo in printk | 18 March 2016, 04:38:27 UTC |
| d66435c | Linus Torvalds | 18 March 2016, 04:32:20 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - functionally equivalent cleanups for wacom driver, making the code more readable, from Benjamin Tissoires - a bunch of improvements and fixes for thingm driver from Heiner Kallweit - bugfixes to out-of-bound access for generic parsing functions (which have been there since ever) extract() and implement(), from Dmitry Torokhov - a lot of added / improved device support in sony, wacom, microsoft, multitouch and logitech driver, from various people * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (44 commits) HID: microsoft: Add ID for MS Wireless Comfort Keyboard hid: thingm: reorder calls in thingm_probe HID: i2c-hid: fix OOB write in i2c_hid_set_or_send_report() HID: multitouch: Release all touch slots on reset_resume HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard2 HID: penmount: report only one button for PenMount 6000 USB touchscreen controller HID: i2c-hid: Fix suspend/resume when already runtime suspended HID: i2c-hid: Add hid-over-i2c name to i2c id table HID: multitouch: force retrieving of Win8 signature blob HID: Support for CMedia CM6533 HID audio jack controls HID: thingm: improve locking HID: thingm: switch to managed version of led_classdev_register HID: thingm: remove workqueue HID: corsair: fix mapping of non-keyboard usages HID: wacom: close the wireless receiver on remove() HID: wacom: cleanup input devices HID: wacom: reuse wacom_parse_and_register() in wireless_work HID: wacom: move down wireless_work() HID: wacom: break out parsing of device and registering of input HID: wacom: break out wacom_intuos_get_tool_type ... | 18 March 2016, 04:32:20 UTC |
| 1a46712 | Linus Torvalds | 18 March 2016, 04:05:32 UTC | Merge tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ... | 18 March 2016, 04:05:32 UTC |
| 82b666e | Linus Torvalds | 18 March 2016, 03:19:19 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu updates from Greg Ungerer: "The main change is the removal of the bit-rotten 68360 support. Also a fix to always make the ethernet FEC platform info available" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: remove obsolete 68360 support m68knommu: fix FEC platform device registration when driver is modular | 18 March 2016, 03:19:19 UTC |
| 588ab3f | Linus Torvalds | 18 March 2016, 03:03:47 UTC | Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Here are the main arm64 updates for 4.6. There are some relatively intrusive changes to support KASLR, the reworking of the kernel virtual memory layout and initial page table creation. Summary: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits) arm64: kasan: Fix zero shadow mapping overriding kernel image shadow arm64: kasan: Use actual memory node when populating the kernel image shadow arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission arm64: Fix misspellings in comments. arm64: efi: add missing frame pointer assignment arm64: make mrs_s prefixing implicit in read_cpuid arm64: enable CONFIG_DEBUG_RODATA by default arm64: Rework valid_user_regs arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly arm64: KVM: Move kvm_call_hyp back to its original localtion arm64: mm: treat memstart_addr as a signed quantity arm64: mm: list kernel sections in order arm64: lse: deal with clobbered IP registers after branch via PLT arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR arm64: kconfig: add submenu for 8.2 architectural features arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot arm64: Add support for Half precision floating point arm64: Remove fixmap include fragility arm64: Add workaround for Cavium erratum 27456 arm64: mm: Mark .rodata as RO ... | 18 March 2016, 03:03:47 UTC |
| 3d15cfd | Linus Torvalds | 18 March 2016, 02:37:08 UTC | Merge tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest updates from Shuah Khan: "This update for Kselftest adds: - A new feature to create test-specific kconfig fragments. This feature helps configure Kselftests to test specific Kernel Configuration options as opposed to defconfig. - A new test for Media Controller API - A few fixes" * tag 'linux-kselftest-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: media_dcevice_test fix usage information selftests: media_dcevice_test fix to handle ioctl failure case selftests: add missing .gitignore file or entry Makefile: add kselftest-merge selftests: create test-specific kconfig fragments selftests: breakpoint: add step_after_suspend_test selftests: add a new test for Media Controller API | 18 March 2016, 02:37:08 UTC |
| bd9e335 | Schemmel Hans-Christoph | 17 March 2016, 10:07:56 UTC | qmi_wwan: Added support for Gemalto's Cinterion PHxx WWAN interface Added support for Gemalto's Cinterion PHxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. PHxx can have: 2 RmNet Interfaces (PID 0x0082) or 1 RmNet + 1 USB Audio interface (PID 0x0083). Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 01:09:08 UTC |
| e316ea6 | Eric Dumazet | 17 March 2016, 05:52:15 UTC | tcp/dccp: remove obsolete WARN_ON() in icmp handlers Now SYN_RECV request sockets are installed in ehash table, an ICMP handler can find a request socket while another cpu handles an incoming packet transforming this SYN_RECV request socket into an ESTABLISHED socket. We need to remove the now obsolete WARN_ON(req->sk), since req->sk is set when a new child is created and added into listener accept queue. If this race happens, the ICMP will do nothing special. Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ben Lazarus <blazarus@google.com> Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 01:06:40 UTC |
| f6773c5 | Eric Dumazet | 17 March 2016, 04:59:49 UTC | vlan: propagate gso_max_segs vlan drivers lack proper propagation of gso_max_segs from lower device. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 March 2016, 01:05:01 UTC |
| 5cd0911 | Linus Torvalds | 17 March 2016, 23:57:55 UTC | Merge tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull pstore update from Tony Luck: "Allow ram backend to be configured with addresses above 4GB" * tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: Add support for 64 Bit address space | 17 March 2016, 23:57:55 UTC |
| 1ca80a0 | Linus Torvalds | 17 March 2016, 23:51:32 UTC | Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 updates from Bob Peterson: "We only have six patches ready for this merge window: - Arnd Bergmann contributed a patch that fixes an uninitialized variable warning. - The second patch avoids a kernel panic due to referencing an iopen glock that may not be held, in an error path. - The third patch fixes a rounding error that caused xfs_tests direct IO write "fsx" tests to fail on GFS2. - The fourth patch tidies up the code path when glocks are being reused to recreate a dinode that was recently deleted. - The fifth reverts an ages-old patch that should no longer be needed, and which interfered with the transition of dinodes from unlinked to free. - And lastly, a patch to eliminate a function parameter that's not needed" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Eliminate parameter non_block on gfs2_inode_lookup GFS2: Don't filter out I_FREEING inodes anymore GFS2: Prevent delete work from occurring on glocks used for create GFS2: Fix direct IO write rounding error gfs2: avoid uninitialized variable warning GFS2: Check if iopen is held when deleting inode | 17 March 2016, 23:51:32 UTC |
| d77bed0 | Linus Torvalds | 17 March 2016, 23:38:36 UTC | Merge tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "Previous changes introduced the use of socket error reporting for dlm sockets. This set includes two fixes in how the socket error callbacks are used" * tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: DLM: Save and restore socket callbacks properly DLM: Replace nodeid_to_addr with kernel_getpeername | 17 March 2016, 23:38:36 UTC |
| faeb20e | Linus Torvalds | 17 March 2016, 23:31:18 UTC | Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Performance improvements in SEEK_DATA and xattr scalability improvements, plus a lot of clean ups and bug fixes" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (38 commits) ext4: clean up error handling in the MMP support jbd2: do not fail journal because of frozen_buffer allocation failure ext4: use __GFP_NOFAIL in ext4_free_blocks() ext4: fix compile error while opening the macro DOUBLE_CHECK ext4: print ext4 mount option data_err=abort correctly ext4: fix NULL pointer dereference in ext4_mark_inode_dirty() ext4: drop unneeded BUFFER_TRACE in ext4_delete_inline_entry() ext4: fix misspellings in comments. jbd2: fix FS corruption possibility in jbd2_journal_destroy() on umount path ext4: more efficient SEEK_DATA implementation ext4: cleanup handling of bh->b_state in DAX mmap ext4: return hole from ext4_map_blocks() ext4: factor out determining of hole size ext4: fix setting of referenced bit in ext4_es_lookup_extent() ext4: remove i_ioend_count ext4: simplify io_end handling for AIO DIO ext4: move trans handling and completion deferal out of _ext4_get_block ext4: rename and split get blocks functions ext4: use i_mutex to serialize unaligned AIO DIO ext4: pack ioend structure better ... | 17 March 2016, 23:31:18 UTC |
| 364e8dd | Linus Torvalds | 17 March 2016, 23:25:46 UTC | Merge tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs Pull configfs updates from Christoph Hellwig: - A large patch from me to simplify setting up the list of default groups by actually implementing it as a list instead of an array. - a small Y2083 prep patch from Deepa Dinamani. Probably doesn't matter on it's own, but it seems like he is trying to get rid of all CURRENT_TIME uses in file systems, which is a worthwhile goal. * tag 'configfs-for-linus' of git://git.infradead.org/users/hch/configfs: configfs: switch ->default groups to a linked list configfs: Replace CURRENT_TIME by current_fs_time() | 17 March 2016, 23:25:46 UTC |
| f9310b2 | Jessica Yu | 17 March 2016, 21:23:07 UTC | sscanf: implement basic character sets Implement basic character sets for the '%[' conversion specifier. The '%[' conversion specifier matches a nonempty sequence of characters from the specified set of accepted (or with '^', rejected) characters between the brackets. The substring matched is to be made up of characters in (or not in) the set. This is useful for matching substrings that are delimited by something other than spaces. This implementation differs from its glibc counterpart in the following ways: (1) No support for character ranges (e.g., 'a-z' or '0-9') (2) The hyphen '-' is not a special character (3) The closing bracket ']' cannot be matched (4) No support (yet) for discarding matching input ('%*[') The bitmap code is largely based upon sample code which was provided by Rasmus. The motivation for adding character set support to sscanf originally stemmed from the kernel livepatching project. An ongoing patchset utilizes new livepatch Elf symbol and section names to store important metadata livepatch needs to properly apply its patches. Such metadata is stored in these section and symbol names as substrings delimited by periods '.' and commas ','. For example, a livepatch symbol name might look like this: .klp.sym.vmlinux.printk,0 However, sscanf currently can only extract "substrings" delimited by whitespace using the "%s" specifier. Thus for the above symbol name, one cannot not use sscanf() to extract substrings "vmlinux" or "printk", for example. A number of discussions on the livepatch mailing list dealing with string parsing code for extracting these '.' and ',' delimited substrings eventually led to the conclusion that such code would be completely unnecessary if the kernel sscanf() supported character sets. Thus only a single sscanf() call would be necessary to extract these substrings. In addition, such an addition to sscanf() could benefit other areas of the kernel that might have a similar need in the future. [akpm@linux-foundation.org: 80-col tweaks] Signed-off-by: Jessica Yu <jeyu@redhat.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 March 2016, 22:09:34 UTC |
| 2553b67 | Josh Poimboeuf | 17 March 2016, 21:23:04 UTC | lib/bug.c: use common WARN helper The traceoff_on_warning option doesn't have any effect on s390, powerpc, arm64, parisc, and sh because there are two different types of WARN implementations: 1) The above mentioned architectures treat WARN() as a special case of a BUG() exception. They handle warnings in report_bug() in lib/bug.c. 2) All other architectures just call warn_slowpath_*() directly. Their warnings are handled in warn_slowpath_common() in kernel/panic.c. Support traceoff_on_warning on all architectures and prevent any future divergence by using a single common function to emit the warning. Also remove the '()' from '%pS()', because the parentheses look funky: [ 45.607629] WARNING: at /root/warn_mod/warn_mod.c:17 .init_dummy+0x20/0x40 [warn_mod]() Reported-by: Chunyu Hu <chuhu@redhat.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 March 2016, 22:09:34 UTC |
