r200696:
  Add rudimentary WOL support. While I'm here remove enabling
  busmastering/memory address in resume path. Bus driver will handle
  that.

r200740:
  Swap VGE_TXQTIMER and VGE_RXQTIMER register definition. Pending
  timer for Tx queue is at 0x3E.

r200756:
  Correct fragment bit definition in comments.

r200758:
  VT6130 datasheet was wrong. If VT6130 receive a jumbo frame the
  controller will split the jumbo frame into multiple RX buffers.
  However it seems the hardware always dma the frame to 8 bytes
  boundary for the split frames. Only the first part of the fragment
  can have 4 byte alignment and subsequent buffers should be 8 bytes
  aligned. Change RX buffer the alignment requirement to 8 bytes from
  4 bytes.

r200759:
  Disable jumbo frame support for PCIe VT6130/VT6132 controllers.
  Quite contrary to VT6130 datasheet which says it supports up to 8K
  jumbo frame, VT6130 does not seem to send jumbo frame that is
  larger than 4K in length. Trying to send a frame that is larger
  than 4K cause TX MAC hang.
  Even though it's possible to allow 4K jumbo frame for VT6130, I
  think it's meaningless to allow 4K jumbo frame. I'm not sure VT6132
  also has the same limitation but I guess it uses the same MAC of
  VT6130.

r200972:
  Remove wrong assertion.