Revision aef2b89662b8a7506846d0dc0df672d196ddf8d0 authored by Russ Dill on 09 May 2012, 22:15:03 UTC, committed by Tony Lindgren on 20 June 2012, 14:18:21 UTC
Commit e813a55eb9c9bc6c8039fb16332cf43402125b30 ("OMAP: board-files: remove custom PD GPIO handling for DVI output") moved TFP410 chip's powerdown-gpio handling from the board files to the tfp410 driver. One gpio_request_one(powerdown-gpio, ...) was mistakenly left unremoved in the Beagle board file. This causes the tfp410 driver to fail to request the gpio on Beagle, causing the driver to fail and thus the DVI output doesn't work. This patch removes several boot errors from board-omap3beagle.c: - gpio_request: gpio--22 (DVI reset) status -22 - Unable to get DVI reset GPIO There is a combination of leftover code and revision confusion. Additionally, xM support is currently a hack. For original Beagleboard this removes the double initialization of GPIO 170, properly configures it as an output, and wraps the initialization in an if block so that xM does not attempt to request it. For Beagleboard xM it removes reference to GPIO 129 which was part of rev A1 and A2 designs, but never functioned. It then properly assigns beagle_dvi_device.reset_gpio in beagle_twl_gpio_setup and removes the hack of initializing it high. Additionally, it uses gpio_set_value_cansleep since this GPIO is connected through i2c. Unfortunately, there is no way to tell the difference between xM A2 and A3. However, GPIO 129 does not function on rev A1 and A2, and the TWL GPIO used on A3 and beyond is not used on rev A1 and A2, there are no problems created by this fix. Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
1 parent 95dca12
i2c-s6000.h
/*
* drivers/i2c/busses/i2c-s6000.h
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 Emlix GmbH <info@emlix.com>
* Author: Oskar Schirmer <oskar@scara.com>
*/
#ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H
#define __DRIVERS_I2C_BUSSES_I2C_S6000_H
#define S6_I2C_CON 0x000
#define S6_I2C_CON_MASTER 0
#define S6_I2C_CON_SPEED 1
#define S6_I2C_CON_SPEED_NORMAL 1
#define S6_I2C_CON_SPEED_FAST 2
#define S6_I2C_CON_SPEED_MASK 3
#define S6_I2C_CON_10BITSLAVE 3
#define S6_I2C_CON_10BITMASTER 4
#define S6_I2C_CON_RESTARTENA 5
#define S6_I2C_CON_SLAVEDISABLE 6
#define S6_I2C_TAR 0x004
#define S6_I2C_TAR_GCORSTART 10
#define S6_I2C_TAR_SPECIAL 11
#define S6_I2C_SAR 0x008
#define S6_I2C_HSMADDR 0x00C
#define S6_I2C_DATACMD 0x010
#define S6_I2C_DATACMD_READ 8
#define S6_I2C_SSHCNT 0x014
#define S6_I2C_SSLCNT 0x018
#define S6_I2C_FSHCNT 0x01C
#define S6_I2C_FSLCNT 0x020
#define S6_I2C_INTRSTAT 0x02C
#define S6_I2C_INTRMASK 0x030
#define S6_I2C_RAWINTR 0x034
#define S6_I2C_INTR_RXUNDER 0
#define S6_I2C_INTR_RXOVER 1
#define S6_I2C_INTR_RXFULL 2
#define S6_I2C_INTR_TXOVER 3
#define S6_I2C_INTR_TXEMPTY 4
#define S6_I2C_INTR_RDREQ 5
#define S6_I2C_INTR_TXABRT 6
#define S6_I2C_INTR_RXDONE 7
#define S6_I2C_INTR_ACTIVITY 8
#define S6_I2C_INTR_STOPDET 9
#define S6_I2C_INTR_STARTDET 10
#define S6_I2C_INTR_GENCALL 11
#define S6_I2C_RXTL 0x038
#define S6_I2C_TXTL 0x03C
#define S6_I2C_CLRINTR 0x040
#define S6_I2C_CLRRXUNDER 0x044
#define S6_I2C_CLRRXOVER 0x048
#define S6_I2C_CLRTXOVER 0x04C
#define S6_I2C_CLRRDREQ 0x050
#define S6_I2C_CLRTXABRT 0x054
#define S6_I2C_CLRRXDONE 0x058
#define S6_I2C_CLRACTIVITY 0x05C
#define S6_I2C_CLRSTOPDET 0x060
#define S6_I2C_CLRSTARTDET 0x064
#define S6_I2C_CLRGENCALL 0x068
#define S6_I2C_ENABLE 0x06C
#define S6_I2C_STATUS 0x070
#define S6_I2C_STATUS_ACTIVITY 0
#define S6_I2C_STATUS_TFNF 1
#define S6_I2C_STATUS_TFE 2
#define S6_I2C_STATUS_RFNE 3
#define S6_I2C_STATUS_RFF 4
#define S6_I2C_TXFLR 0x074
#define S6_I2C_RXFLR 0x078
#define S6_I2C_SRESET 0x07C
#define S6_I2C_SRESET_IC_SRST 0
#define S6_I2C_SRESET_IC_MASTER_SRST 1
#define S6_I2C_SRESET_IC_SLAVE_SRST 2
#define S6_I2C_TXABRTSOURCE 0x080
#endif
Computing file changes ...