Revision aef2b89662b8a7506846d0dc0df672d196ddf8d0 authored by Russ Dill on 09 May 2012, 22:15:03 UTC, committed by Tony Lindgren on 20 June 2012, 14:18:21 UTC
Commit e813a55eb9c9bc6c8039fb16332cf43402125b30 ("OMAP: board-files: remove custom PD GPIO handling for DVI output") moved TFP410 chip's powerdown-gpio handling from the board files to the tfp410 driver. One gpio_request_one(powerdown-gpio, ...) was mistakenly left unremoved in the Beagle board file. This causes the tfp410 driver to fail to request the gpio on Beagle, causing the driver to fail and thus the DVI output doesn't work. This patch removes several boot errors from board-omap3beagle.c: - gpio_request: gpio--22 (DVI reset) status -22 - Unable to get DVI reset GPIO There is a combination of leftover code and revision confusion. Additionally, xM support is currently a hack. For original Beagleboard this removes the double initialization of GPIO 170, properly configures it as an output, and wraps the initialization in an if block so that xM does not attempt to request it. For Beagleboard xM it removes reference to GPIO 129 which was part of rev A1 and A2 designs, but never functioned. It then properly assigns beagle_dvi_device.reset_gpio in beagle_twl_gpio_setup and removes the hack of initializing it high. Additionally, it uses gpio_set_value_cansleep since this GPIO is connected through i2c. Unfortunately, there is no way to tell the difference between xM A2 and A3. However, GPIO 129 does not function on rev A1 and A2, and the TWL GPIO used on A3 and beyond is not used on rev A1 and A2, there are no problems created by this fix. Tested on Beagleboard-xM Rev C1 and Beagleboard Rev B4. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
1 parent 95dca12
amd_iommu_proto.h
/*
* Copyright (C) 2009-2010 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <joerg.roedel@amd.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_X86_AMD_IOMMU_PROTO_H
#define _ASM_X86_AMD_IOMMU_PROTO_H
#include "amd_iommu_types.h"
extern int amd_iommu_init_dma_ops(void);
extern int amd_iommu_init_passthrough(void);
extern irqreturn_t amd_iommu_int_thread(int irq, void *data);
extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
extern void amd_iommu_apply_erratum_63(u16 devid);
extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
extern int amd_iommu_init_devices(void);
extern void amd_iommu_uninit_devices(void);
extern void amd_iommu_init_notifier(void);
extern void amd_iommu_init_api(void);
/* IOMMUv2 specific functions */
struct iommu_domain;
extern bool amd_iommu_v2_supported(void);
extern int amd_iommu_register_ppr_notifier(struct notifier_block *nb);
extern int amd_iommu_unregister_ppr_notifier(struct notifier_block *nb);
extern void amd_iommu_domain_direct_map(struct iommu_domain *dom);
extern int amd_iommu_domain_enable_v2(struct iommu_domain *dom, int pasids);
extern int amd_iommu_flush_page(struct iommu_domain *dom, int pasid,
u64 address);
extern int amd_iommu_flush_tlb(struct iommu_domain *dom, int pasid);
extern int amd_iommu_domain_set_gcr3(struct iommu_domain *dom, int pasid,
unsigned long cr3);
extern int amd_iommu_domain_clear_gcr3(struct iommu_domain *dom, int pasid);
extern struct iommu_domain *amd_iommu_get_v2_domain(struct pci_dev *pdev);
#define PPR_SUCCESS 0x0
#define PPR_INVALID 0x1
#define PPR_FAILURE 0xf
extern int amd_iommu_complete_ppr(struct pci_dev *pdev, int pasid,
int status, int tag);
#ifndef CONFIG_AMD_IOMMU_STATS
static inline void amd_iommu_stats_init(void) { }
#endif /* !CONFIG_AMD_IOMMU_STATS */
static inline bool is_rd890_iommu(struct pci_dev *pdev)
{
return (pdev->vendor == PCI_VENDOR_ID_ATI) &&
(pdev->device == PCI_DEVICE_ID_RD890_IOMMU);
}
static inline bool iommu_feature(struct amd_iommu *iommu, u64 f)
{
if (!(iommu->cap & (1 << IOMMU_CAP_EFR)))
return false;
return !!(iommu->features & f);
}
#endif /* _ASM_X86_AMD_IOMMU_PROTO_H */
Computing file changes ...