Revision af8f3f514d193eb353f9b6cea503c55d074e6153 authored by Hanjun Guo on 04 January 2015, 10:55:02 UTC, committed by Rafael J. Wysocki on 05 January 2015, 22:32:42 UTC
apic_id in MADT table is the CPU hardware id which identify
it self in the system for x86 and ia64, OSPM will use it for
SMP init to map APIC ID to logical cpu number in the early
boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the
ACPI processor driver is probed and the driver will use acpi_id
in DSDT to get the apic_id, then map to the logical cpu number
which is needed by the processor driver.

Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec,
so apic_id is used both in arch code and ACPI core which is
pretty fine. Since ACPI 5.0, ARM is supported by ACPI and
APIC is not available on ARM, this will confuse people when
apic_id is both used by x86 and ARM in one function.

So convert apic_id to phys_id (which is the original meaning)
in ACPI processor dirver to make it arch agnostic, but leave the
arch dependent code unchanged, no functional change.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1 parent b7392d2
Raw File
deflate.c
/*
 * Cryptographic API.
 *
 * Deflate algorithm (RFC 1951), implemented here primarily for use
 * by IPCOMP (RFC 3173 & RFC 2394).
 *
 * Copyright (c) 2003 James Morris <jmorris@intercode.com.au>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * FIXME: deflate transforms will require up to a total of about 436k of kernel
 * memory on i386 (390k for compression, the rest for decompression), as the
 * current zlib kernel code uses a worst case pre-allocation system by default.
 * This needs to be fixed so that the amount of memory required is properly
 * related to the  winbits and memlevel parameters.
 *
 * The default winbits of 11 should suit most packets, and it may be something
 * to configure on a per-tfm basis in the future.
 *
 * Currently, compression history is not maintained between tfm calls, as
 * it is not needed for IPCOMP and keeps the code simpler.  It can be
 * implemented if someone wants it.
 */
#include <linux/init.h>
#include <linux/module.h>
#include <linux/crypto.h>
#include <linux/zlib.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/net.h>

#define DEFLATE_DEF_LEVEL		Z_DEFAULT_COMPRESSION
#define DEFLATE_DEF_WINBITS		11
#define DEFLATE_DEF_MEMLEVEL		MAX_MEM_LEVEL

struct deflate_ctx {
	struct z_stream_s comp_stream;
	struct z_stream_s decomp_stream;
};

static int deflate_comp_init(struct deflate_ctx *ctx)
{
	int ret = 0;
	struct z_stream_s *stream = &ctx->comp_stream;

	stream->workspace = vzalloc(zlib_deflate_workspacesize(
				-DEFLATE_DEF_WINBITS, DEFLATE_DEF_MEMLEVEL));
	if (!stream->workspace) {
		ret = -ENOMEM;
		goto out;
	}
	ret = zlib_deflateInit2(stream, DEFLATE_DEF_LEVEL, Z_DEFLATED,
	                        -DEFLATE_DEF_WINBITS, DEFLATE_DEF_MEMLEVEL,
	                        Z_DEFAULT_STRATEGY);
	if (ret != Z_OK) {
		ret = -EINVAL;
		goto out_free;
	}
out:
	return ret;
out_free:
	vfree(stream->workspace);
	goto out;
}

static int deflate_decomp_init(struct deflate_ctx *ctx)
{
	int ret = 0;
	struct z_stream_s *stream = &ctx->decomp_stream;

	stream->workspace = vzalloc(zlib_inflate_workspacesize());
	if (!stream->workspace) {
		ret = -ENOMEM;
		goto out;
	}
	ret = zlib_inflateInit2(stream, -DEFLATE_DEF_WINBITS);
	if (ret != Z_OK) {
		ret = -EINVAL;
		goto out_free;
	}
out:
	return ret;
out_free:
	vfree(stream->workspace);
	goto out;
}

static void deflate_comp_exit(struct deflate_ctx *ctx)
{
	zlib_deflateEnd(&ctx->comp_stream);
	vfree(ctx->comp_stream.workspace);
}

static void deflate_decomp_exit(struct deflate_ctx *ctx)
{
	zlib_inflateEnd(&ctx->decomp_stream);
	vfree(ctx->decomp_stream.workspace);
}

static int deflate_init(struct crypto_tfm *tfm)
{
	struct deflate_ctx *ctx = crypto_tfm_ctx(tfm);
	int ret;

	ret = deflate_comp_init(ctx);
	if (ret)
		goto out;
	ret = deflate_decomp_init(ctx);
	if (ret)
		deflate_comp_exit(ctx);
out:
	return ret;
}

static void deflate_exit(struct crypto_tfm *tfm)
{
	struct deflate_ctx *ctx = crypto_tfm_ctx(tfm);

	deflate_comp_exit(ctx);
	deflate_decomp_exit(ctx);
}

static int deflate_compress(struct crypto_tfm *tfm, const u8 *src,
			    unsigned int slen, u8 *dst, unsigned int *dlen)
{
	int ret = 0;
	struct deflate_ctx *dctx = crypto_tfm_ctx(tfm);
	struct z_stream_s *stream = &dctx->comp_stream;

	ret = zlib_deflateReset(stream);
	if (ret != Z_OK) {
		ret = -EINVAL;
		goto out;
	}

	stream->next_in = (u8 *)src;
	stream->avail_in = slen;
	stream->next_out = (u8 *)dst;
	stream->avail_out = *dlen;

	ret = zlib_deflate(stream, Z_FINISH);
	if (ret != Z_STREAM_END) {
		ret = -EINVAL;
		goto out;
	}
	ret = 0;
	*dlen = stream->total_out;
out:
	return ret;
}

static int deflate_decompress(struct crypto_tfm *tfm, const u8 *src,
			      unsigned int slen, u8 *dst, unsigned int *dlen)
{

	int ret = 0;
	struct deflate_ctx *dctx = crypto_tfm_ctx(tfm);
	struct z_stream_s *stream = &dctx->decomp_stream;

	ret = zlib_inflateReset(stream);
	if (ret != Z_OK) {
		ret = -EINVAL;
		goto out;
	}

	stream->next_in = (u8 *)src;
	stream->avail_in = slen;
	stream->next_out = (u8 *)dst;
	stream->avail_out = *dlen;

	ret = zlib_inflate(stream, Z_SYNC_FLUSH);
	/*
	 * Work around a bug in zlib, which sometimes wants to taste an extra
	 * byte when being used in the (undocumented) raw deflate mode.
	 * (From USAGI).
	 */
	if (ret == Z_OK && !stream->avail_in && stream->avail_out) {
		u8 zerostuff = 0;
		stream->next_in = &zerostuff;
		stream->avail_in = 1;
		ret = zlib_inflate(stream, Z_FINISH);
	}
	if (ret != Z_STREAM_END) {
		ret = -EINVAL;
		goto out;
	}
	ret = 0;
	*dlen = stream->total_out;
out:
	return ret;
}

static struct crypto_alg alg = {
	.cra_name		= "deflate",
	.cra_flags		= CRYPTO_ALG_TYPE_COMPRESS,
	.cra_ctxsize		= sizeof(struct deflate_ctx),
	.cra_module		= THIS_MODULE,
	.cra_init		= deflate_init,
	.cra_exit		= deflate_exit,
	.cra_u			= { .compress = {
	.coa_compress 		= deflate_compress,
	.coa_decompress  	= deflate_decompress } }
};

static int __init deflate_mod_init(void)
{
	return crypto_register_alg(&alg);
}

static void __exit deflate_mod_fini(void)
{
	crypto_unregister_alg(&alg);
}

module_init(deflate_mod_init);
module_exit(deflate_mod_fini);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Deflate Compression Algorithm for IPCOMP");
MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
MODULE_ALIAS_CRYPTO("deflate");
back to top