Revision af8f3f514d193eb353f9b6cea503c55d074e6153 authored by Hanjun Guo on 04 January 2015, 10:55:02 UTC, committed by Rafael J. Wysocki on 05 January 2015, 22:32:42 UTC
apic_id in MADT table is the CPU hardware id which identify
it self in the system for x86 and ia64, OSPM will use it for
SMP init to map APIC ID to logical cpu number in the early
boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the
ACPI processor driver is probed and the driver will use acpi_id
in DSDT to get the apic_id, then map to the logical cpu number
which is needed by the processor driver.

Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec,
so apic_id is used both in arch code and ACPI core which is
pretty fine. Since ACPI 5.0, ARM is supported by ACPI and
APIC is not available on ARM, this will confuse people when
apic_id is both used by x86 and ARM in one function.

So convert apic_id to phys_id (which is the original meaning)
in ACPI processor dirver to make it arch agnostic, but leave the
arch dependent code unchanged, no functional change.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1 parent b7392d2
Raw File
decompress_inflate.c
#ifdef STATIC
/* Pre-boot environment: included */

/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots
 * errors about console_printk etc... on ARM */
#define _LINUX_KERNEL_H

#include "zlib_inflate/inftrees.c"
#include "zlib_inflate/inffast.c"
#include "zlib_inflate/inflate.c"

#else /* STATIC */
/* initramfs et al: linked */

#include <linux/zutil.h>

#include "zlib_inflate/inftrees.h"
#include "zlib_inflate/inffast.h"
#include "zlib_inflate/inflate.h"

#include "zlib_inflate/infutil.h"
#include <linux/decompress/inflate.h>

#endif /* STATIC */

#include <linux/decompress/mm.h>

#define GZIP_IOBUF_SIZE (16*1024)

static long INIT nofill(void *buffer, unsigned long len)
{
	return -1;
}

/* Included from initramfs et al code */
STATIC int INIT gunzip(unsigned char *buf, long len,
		       long (*fill)(void*, unsigned long),
		       long (*flush)(void*, unsigned long),
		       unsigned char *out_buf,
		       long *pos,
		       void(*error)(char *x)) {
	u8 *zbuf;
	struct z_stream_s *strm;
	int rc;
	size_t out_len;

	rc = -1;
	if (flush) {
		out_len = 0x8000; /* 32 K */
		out_buf = malloc(out_len);
	} else {
		out_len = ((size_t)~0) - (size_t)out_buf; /* no limit */
	}
	if (!out_buf) {
		error("Out of memory while allocating output buffer");
		goto gunzip_nomem1;
	}

	if (buf)
		zbuf = buf;
	else {
		zbuf = malloc(GZIP_IOBUF_SIZE);
		len = 0;
	}
	if (!zbuf) {
		error("Out of memory while allocating input buffer");
		goto gunzip_nomem2;
	}

	strm = malloc(sizeof(*strm));
	if (strm == NULL) {
		error("Out of memory while allocating z_stream");
		goto gunzip_nomem3;
	}

	strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
				 sizeof(struct inflate_state));
	if (strm->workspace == NULL) {
		error("Out of memory while allocating workspace");
		goto gunzip_nomem4;
	}

	if (!fill)
		fill = nofill;

	if (len == 0)
		len = fill(zbuf, GZIP_IOBUF_SIZE);

	/* verify the gzip header */
	if (len < 10 ||
	   zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) {
		if (pos)
			*pos = 0;
		error("Not a gzip file");
		goto gunzip_5;
	}

	/* skip over gzip header (1f,8b,08... 10 bytes total +
	 * possible asciz filename)
	 */
	strm->next_in = zbuf + 10;
	strm->avail_in = len - 10;
	/* skip over asciz filename */
	if (zbuf[3] & 0x8) {
		do {
			/*
			 * If the filename doesn't fit into the buffer,
			 * the file is very probably corrupt. Don't try
			 * to read more data.
			 */
			if (strm->avail_in == 0) {
				error("header error");
				goto gunzip_5;
			}
			--strm->avail_in;
		} while (*strm->next_in++);
	}

	strm->next_out = out_buf;
	strm->avail_out = out_len;

	rc = zlib_inflateInit2(strm, -MAX_WBITS);

	if (!flush) {
		WS(strm)->inflate_state.wsize = 0;
		WS(strm)->inflate_state.window = NULL;
	}

	while (rc == Z_OK) {
		if (strm->avail_in == 0) {
			/* TODO: handle case where both pos and fill are set */
			len = fill(zbuf, GZIP_IOBUF_SIZE);
			if (len < 0) {
				rc = -1;
				error("read error");
				break;
			}
			strm->next_in = zbuf;
			strm->avail_in = len;
		}
		rc = zlib_inflate(strm, 0);

		/* Write any data generated */
		if (flush && strm->next_out > out_buf) {
			long l = strm->next_out - out_buf;
			if (l != flush(out_buf, l)) {
				rc = -1;
				error("write error");
				break;
			}
			strm->next_out = out_buf;
			strm->avail_out = out_len;
		}

		/* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
		if (rc == Z_STREAM_END) {
			rc = 0;
			break;
		} else if (rc != Z_OK) {
			error("uncompression error");
			rc = -1;
		}
	}

	zlib_inflateEnd(strm);
	if (pos)
		/* add + 8 to skip over trailer */
		*pos = strm->next_in - zbuf+8;

gunzip_5:
	free(strm->workspace);
gunzip_nomem4:
	free(strm);
gunzip_nomem3:
	if (!buf)
		free(zbuf);
gunzip_nomem2:
	if (flush)
		free(out_buf);
gunzip_nomem1:
	return rc; /* returns Z_OK (0) if successful */
}

#define decompress gunzip
back to top