Revision af8f3f514d193eb353f9b6cea503c55d074e6153 authored by Hanjun Guo on 04 January 2015, 10:55:02 UTC, committed by Rafael J. Wysocki on 05 January 2015, 22:32:42 UTC
apic_id in MADT table is the CPU hardware id which identify it self in the system for x86 and ia64, OSPM will use it for SMP init to map APIC ID to logical cpu number in the early boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the ACPI processor driver is probed and the driver will use acpi_id in DSDT to get the apic_id, then map to the logical cpu number which is needed by the processor driver. Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec, so apic_id is used both in arch code and ACPI core which is pretty fine. Since ACPI 5.0, ARM is supported by ACPI and APIC is not available on ARM, this will confuse people when apic_id is both used by x86 and ARM in one function. So convert apic_id to phys_id (which is the original meaning) in ACPI processor dirver to make it arch agnostic, but leave the arch dependent code unchanged, no functional change. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1 parent b7392d2
vidc_fill.S
/*
* linux/drivers/sound/vidc_fill.S
*
* Copyright (C) 1997 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Filler routines for DMA buffers
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
.text
ENTRY(vidc_fill_1x8_u)
mov ip, #0xff00
1: cmp r0, r1
bge vidc_clear
ldrb r4, [r0], #1
eor r4, r4, #0x80
and r4, ip, r4, lsl #8
orr r4, r4, r4, lsl #16
str r4, [r2], #4
cmp r2, r3
blt 1b
mov pc, lr
ENTRY(vidc_fill_2x8_u)
mov ip, #0xff00
1: cmp r0, r1
bge vidc_clear
ldr r4, [r0], #2
and r5, r4, ip
and r4, ip, r4, lsl #8
orr r4, r4, r5, lsl #16
orr r4, r4, r4, lsr #8
str r4, [r2], #4
cmp r2, r3
blt 1b
mov pc, lr
ENTRY(vidc_fill_1x8_s)
mov ip, #0xff00
1: cmp r0, r1
bge vidc_clear
ldrb r4, [r0], #1
and r4, ip, r4, lsl #8
orr r4, r4, r4, lsl #16
str r4, [r2], #4
cmp r2, r3
blt 1b
mov pc, lr
ENTRY(vidc_fill_2x8_s)
mov ip, #0xff00
1: cmp r0, r1
bge vidc_clear
ldr r4, [r0], #2
and r5, r4, ip
and r4, ip, r4, lsl #8
orr r4, r4, r5, lsl #16
orr r4, r4, r4, lsr #8
str r4, [r2], #4
cmp r2, r3
blt 1b
mov pc, lr
ENTRY(vidc_fill_1x16_s)
mov ip, #0xff00
orr ip, ip, ip, lsr #8
1: cmp r0, r1
bge vidc_clear
ldr r5, [r0], #2
and r4, r5, ip
orr r4, r4, r4, lsl #16
str r4, [r2], #4
cmp r0, r1
addlt r0, r0, #2
andlt r4, r5, ip, lsl #16
orrlt r4, r4, r4, lsr #16
strlt r4, [r2], #4
cmp r2, r3
blt 1b
mov pc, lr
ENTRY(vidc_fill_2x16_s)
mov ip, #0xff00
orr ip, ip, ip, lsr #8
1: cmp r0, r1
bge vidc_clear
ldr r4, [r0], #4
str r4, [r2], #4
cmp r0, r1
ldrlt r4, [r0], #4
strlt r4, [r2], #4
cmp r2, r3
blt 1b
mov pc, lr
ENTRY(vidc_fill_noaudio)
mov r0, #0
mov r1, #0
2: mov r4, #0
mov r5, #0
1: cmp r2, r3
stmltia r2!, {r0, r1, r4, r5}
blt 1b
mov pc, lr
ENTRY(vidc_clear)
mov r0, #0
mov r1, #0
tst r2, #4
str r0, [r2], #4
tst r2, #8
stmia r2!, {r0, r1}
b 2b
/*
* Call filler routines with:
* r0 = phys address
* r1 = phys end
* r2 = buffer
* Returns:
* r0 = new buffer address
* r2 = new buffer finish
* r4 = corrupted
* r5 = corrupted
* ip = corrupted
*/
ENTRY(vidc_sound_dma_irq)
stmfd sp!, {r4 - r8, lr}
ldr r8, =dma_start
ldmia r8, {r0, r1, r2, r3, r4, r5}
teq r1, #0
adreq r4, vidc_fill_noaudio
moveq r7, #1 << 31
movne r7, #0
mov ip, #IOMD_BASE & 0xff000000
orr ip, ip, #IOMD_BASE & 0x00ff0000
ldrb r6, [ip, #IOMD_SD0ST]
tst r6, #DMA_ST_OFL @ Check for overrun
eorne r6, r6, #DMA_ST_AB
tst r6, #DMA_ST_AB
moveq r2, r3 @ DMAing A, update B
add r3, r2, r5 @ End of DMA buffer
add r1, r1, r0 @ End of virtual DMA buffer
mov lr, pc
mov pc, r4 @ Call fill routine (uses r4, ip)
sub r1, r1, r0 @ Remaining length
stmia r8, {r0, r1}
mov r0, #0
tst r2, #4 @ Round buffer up to 4 words
strne r0, [r2], #4
tst r2, #8
strne r0, [r2], #4
strne r0, [r2], #4
sub r2, r2, #16
mov r2, r2, lsl #20
movs r2, r2, lsr #20
orreq r2, r2, #1 << 30 @ Set L bit
orr r2, r2, r7
ldmdb r8, {r3, r4, r5}
tst r6, #DMA_ST_AB
mov ip, #IOMD_BASE & 0xff000000
orr ip, ip, #IOMD_BASE & 0x00ff0000
streq r4, [ip, #IOMD_SD0CURB]
strne r5, [ip, #IOMD_SD0CURA]
streq r2, [ip, #IOMD_SD0ENDB]
strne r2, [ip, #IOMD_SD0ENDA]
ldr lr, [ip, #IOMD_SD0ST]
tst lr, #DMA_ST_OFL
bne 1f
tst r6, #DMA_ST_AB
strne r4, [ip, #IOMD_SD0CURB]
streq r5, [ip, #IOMD_SD0CURA]
strne r2, [ip, #IOMD_SD0ENDB]
streq r2, [ip, #IOMD_SD0ENDA]
1: teq r7, #0
mov r0, #0x10
strneb r0, [ip, #IOMD_SD0CR]
ldmfd sp!, {r4 - r8, lr}
mov r0, #1 @ IRQ_HANDLED
teq r1, #0 @ If we have no more
movne pc, lr
teq r3, #0
movne pc, r3 @ Call interrupt routine
mov pc, lr
.data
.globl dma_interrupt
dma_interrupt:
.long 0 @ r3
.globl dma_pbuf
dma_pbuf:
.long 0 @ r4
.long 0 @ r5
.globl dma_start
dma_start:
.long 0 @ r0
.globl dma_count
dma_count:
.long 0 @ r1
.globl dma_buf
dma_buf:
.long 0 @ r2
.long 0 @ r3
.globl vidc_filler
vidc_filler:
.long vidc_fill_noaudio @ r4
.globl dma_bufsize
dma_bufsize:
.long 0x1000 @ r5
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...