Revision afb150384c671c72502d79b81811b1923ee6084e authored by Edzer J. Pebesma on 12 December 2008, 17:59:42 UTC, committed by cran-robot on 12 December 2008, 17:59:42 UTC
1 parent eb020f8
polygon.c
/*
polygon.c -- as incorporated in
Gstat, a program for geostatistical modelling, prediction and simulation
1992, 2003, by Edzer J. Pebesma
Authors: Edzer J. Pebesma (E.Pebesma@geo.uu.nl)
Steve Joyce (steve.joyce@resgeom.slu.se)
Konstantin Malakhanov (malakhanov@iwwl.rwth-aachen.de)
This code (polygon handling part) was initially written by Edzer J. Pebesma.
Edges handling part is originally by Steve Joyce.
Simplified and merged by Konstantin Malakhanov.
InPoly function is Written by Joseph O'Rourke, contributions by
Min Xu, June 1997.
Questions to orourke@cs.smith.edu.
--------------------------------------------------------------------
InPoly is Copyright 1998 by Joseph O'Rourke. It may be freely
redistributed in its entirety provided that this copyright notice is
not removed.
--------------------------------------------------------------------
Edzer J. Pebesma (e.pebesma@geo.uu.nl)
Department of physical geography, Utrecht University
P.O. Box 80.115, 3508 TC Utrecht, The Netherlands
Steve Joyce mailto:steve.joyce@resgeom.slu.se
Remote Sensing Laboratory http://www.resgeom.slu.se
Dept. of Forest Resource Mgmt. & Geomatics Tel: +46 90 16 69 57
Swedish University of Agricultural Sciences Fax: +46 90 14 19 15
S-901 83 Umeĺ, Sweden
Konstantin Malakhanov
Institut for Hydraulic Engineering & Groundwater Mgmt.,
RWTH Aachen, Germany,
--------------------------------------------------------------------
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
(read also the files COPYING and Copyright) */
/*
* polygon.c: point-in-polygon routine, if method=polygon;
also edges handling for interpolation/simulation.
Variogram modelling doesn't use this yet.
*/
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <math.h>
#include "defs.h"
#include "data.h"
#include "utils.h"
#include "debug.h"
#include "userio.h"
#include "read.h"
#include "polygon.h"
#include "glvars.h"
/* masks segment crossing codes - based on SPJ */
#define CROSS 0x01
#define SPOINT1 0x02
#define SPOINT2 0x04
#define EPOINT1 0x08
#define EPOINT2 0x10
/* point-to-segment, point-to-polygon relations */
#define POLY_IN 0x01
#define POLY_OUT 0x02
#define POLY_EDGE (POLY_IN|POLY_OUT)
#define IWW 1
/* for linear combination of coordinates:*/
#define DELTA_AB(_p,_a,_b,_r) (_p).x = (_a).x + (_r) * ((_b).x - (_a).x);\
(_p).y = (_a).y + (_r) * ((_b).y - (_a).y);
static char InPoly(PLOT_POINT q, POLYGON *Poly);
static int CDECL dist_cmp(const DPOINT **ap, const DPOINT **bp);
unsigned char line_of_sight(const PLOT_POINT data, const PLOT_POINT target,
const POLYGON *p_obj);
static unsigned int segment_cross_check(PLOT_POINT p1, PLOT_POINT p2, PLOT_POINT p3, PLOT_POINT p4, double *r, double *s);
static unsigned int segment_parallel_check(PLOT_POINT a, PLOT_POINT b, PLOT_POINT c, PLOT_POINT d);
static int segment_between_check(PLOT_POINT a, PLOT_POINT b, PLOT_POINT c);
static unsigned int check_open_edges(const PLOT_POINT data, const int target_side,
const PLOT_POINT target, const POLYGON *p_obj);
static void print_poly_log(POLYGON *edge);
static const char *fname = NULL;
/*------------------------------ POLYGONS ------------------------------*/
POLYGON *read_polygons(const char *filename, int *n_polys, double **iso_values) {
FILE *f = NULL;
int i = 0, j,n, line_size = 0, d, np, iww_nl=-1;
char *line = NULL, *cp;
POLYGON *pol = NULL;
double val, *values = NULL;
fname = filename;
f = efopen(filename, "r");
/* pol = (POLYGON *) emalloc(sizeof(POLYGON));*/
get_line(&line, &line_size, f);
if (strstr(line, "EXP") == line) { /* read arc-info e00 file */
if ((cp = strchr(line + 7, ' ')) != NULL)
*cp = '\0';
cp = line + 7;
printlog("reading e00 polygon coverage `%s'", cp);
get_line(&line, &line_size, f); /* ARC # */
n = 0;
while (n >= 0) {
get_line(&line, &line_size, f); /* ARC # */
/* I have no examples where ARC comes before EVERY line..*/
if (sscanf(line, "%d%d%d%d%d%d%d", &n, &d, &d, &d, &d, &d, &np) != 7)
pr_warning("cannot read 7 integers from `%s'", line);
if (n > 0) {
i++;
pol = erealloc(pol, i * sizeof(POLYGON));
pol[i - 1] = read_n_points(f, np);
/* we do not delete polygons of 2 points, as we are
not neccessary reading closed polygons*/
if (np <= 1) { /* remove the degenerate polygon */
efree(pol[i - 1].p);
i--;
}
}
}
} else { /* read `plot' file */
printlog("reading plot file `%s'", filename);
do {
d=sscanf(line, "%d %lf", &np,&val);
if (d==0 || d==EOF) {
#ifdef IWW
if (i==0 && d==0) { /* try IWW poly/isolines */
printlog(" IWW poly/isolines? 7 header lines + number of isolines:\n");
/* printlog("%d) %s",1,line) ;*/
for (j=1;j<=7;j++)
{
printlog("%d) %s",j,line) ;
if (get_line(&line, &line_size, f) ==NULL)
ErrMsg(ER_READ,filename);
}
if (sscanf(line, "%d", &iww_nl) !=1)
ErrMsg(ER_RDINT,line);
else
continue; /* get next line with np etc.*/
} else
#endif
{
pr_warning("file: %s, line without data encountered \n", fname);
continue;
}
}
if (np<=1) {
printf(" (polyline size %d encountered)",np);
continue;
}
i++;
pol = erealloc(pol, i * sizeof(POLYGON));
if (d==2) {
values = erealloc(values, i * sizeof(double));
values[i - 1]=val;
}
pol[i - 1] = read_n_points(f, np);
if (np <= 1) { /* remove the degenerate polygon */
efree(pol[i - 1].p);
i--;
}
} while (get_line(&line, &line_size, f));
}
printlog(", %d polygons read\n", i);
#ifdef IWW
if (iww_nl != -1 && iww_nl != i)
pr_warning("the given number of isolines differs from number of actual loaded.");
#endif
*n_polys = i;
if (iso_values)
*iso_values=values;
efclose(f);
efree(line);
return pol;
}
void report_edges(void) {
int i, j, n, *ip;
char delim;
POLYGON **edges;
delim = (DEBUG_NORMAL || DEBUG_DUMP ? ' ': '\n');
edges = get_edges();
if (DEBUG_NORMAL || DEBUG_DUMP || DEBUG_DATA) {
ip=get_n_edges_polys();
printlog("edges:");
for (i = 0; i < get_n_edges(); i++) {
n=ip[i];
/* report edge files and number of edges per file */
printlog("%c %s (%d edge(s))",delim,get_edges_name(i),n);
if (! DEBUG_DATA)
delim=',';
if (DEBUG_DATA) { /* report every line */
printlog("\n");
for (j = 0; j<n; j++) { /*over edges in a file */
print_poly_log(&(edges[i][j]));
}
}
}
if (!DEBUG_DATA)
/* fputc('\n',logfile); */
printlog("\n");
}
}
static void print_poly_log(POLYGON *edge) {
int i,n=edge->lines;
printlog("%+d",n);
/* fputc('\n',a_stream); */
printlog("\n");
for (i=0;i<n;i++)
printlog("%g %g\n",edge->p[i].x,edge->p[i].y);
/* fflush(a_stream); */
return;
}
POLYGON read_n_points(FILE *f, int np) {
static char *line = NULL;
static int line_size;
POLYGON pl;
int n = 0;
char *cp;
pl.lines = np; /* check later that first == last */
pl.p = (PLOT_POINT *) emalloc(np * sizeof(PLOT_POINT));
while (n < np) {
get_line(&line, &line_size, f);
/* pr_warning("file: %s, line '%s' %d\n",fname,line,n); */
cp = strtok(line, DELIMITERS);
if (cp == NULL) {
if (feof(f)) {
pr_warning("file: %s, not enough data points (%d requested, %d found '%s' )\n", fname, np, n, line);
ErrMsg(ER_READ, fname);
} else {
pr_warning("file: %s, line without data encountered (%d)\n", fname, n+1);
continue;
}
}
if (read_double(cp, &(pl.p[n].x)))
ErrMsg(ER_RDFLT, cp);
cp = strtok(NULL, DELIMITERS);
if (read_double(cp, &(pl.p[n].y)))
ErrMsg(ER_RDFLT, cp);
n++;
cp = strtok(NULL, DELIMITERS);
if (cp != NULL) { /* four on a line */
if (read_double(cp, &(pl.p[n].x)))
ErrMsg(ER_RDFLT, cp);
cp = strtok(NULL, DELIMITERS);
if (read_double(cp, &(pl.p[n].y)))
ErrMsg(ER_RDFLT, cp);
n++;
}
}
pl.close = (pl.p[0].x == pl.p[np-1].x && pl.p[0].y == pl.p[np-1].y);
setup_poly_minmax(&pl);
return pl;
}
int point_in_polygon(PLOT_POINT point, POLYGON *pl)
{
if ((point.x < pl->mbr.min.x) || (point.x > pl->mbr.max.x) ||
(point.y < pl->mbr.min.y) || (point.y > pl->mbr.max.y))
return 0;
else
return InPoly(point, pl) != 'o';
}
/*
This code is described in "Computational Geometry in C" (Second Edition),
Chapter 7. It is not written to be comprehensible without the
explanation in that book.
For each query point q, InPoly returns one of four char's:
i : q is strictly interior to P
o : q is strictly exterior to P
v : q is a vertex of P
e : q lies on the relative interior of an edge of P
These represent mutually exclusive categories.
For an explanation of the code, see Chapter 7 of
"Computational Geometry in C (Second Edition)."
Written by Joseph O'Rourke, contributions by Min Xu, June 1997.
Questions to orourke@cs.smith.edu.
--------------------------------------------------------------------
This code is Copyright 1998 by Joseph O'Rourke. It may be freely
redistributed in its entirety provided that this copyright notice is
not removed.
--------------------------------------------------------------------
*/
/*
InPoly returns a char in {i,o,v,e}. See above for definitions.
*/
static char InPoly(PLOT_POINT q, POLYGON *Poly)
{
int n = Poly->lines;
PLOT_POINT *P=Poly->p;
int i, i1; /* point index; i1 = i-1 mod n */
double x; /* x intersection of e with ray */
double xx=q.x, yy=q.y;
int Rcross = 0; /* number of right edge/ray crossings */
int Lcross = 0; /* number of left edge/ray crossings */
/* For each edge e=(i-1,i), see if crosses ray. */
for( i = 0; i < n; i++ ) {
/* First see if q=(0,0) is a vertex. */
if (( P[i].x - xx )==0 &&( P[i].y - yy )==0 ) return 'v';
i1 = ( i + n - 1 ) % n;
/* printf("e=(%d,%d)\t", i1, i); */
/* if e "straddles" the x-axis... */
/* The commented-out statement is logically equivalent to the one
following. */
/* if( ( ( P[i].y > 0 ) && ( P[i1].y <= 0 ) ) ||
( ( P[i1].y > 0 ) && ( P[i] .y <= 0 ) ) ) { */
if( (( P[i].y - yy ) > 0 ) != (( P[i1].y - yy ) > 0 ) ) {
/* e straddles ray, so compute intersection with ray. */
x = (( P[i].x - xx) *( P[i1].y - yy ) -( P[i1].x - xx ) *( P[i].y - yy )) /
(P[i1].y - P[i].y );
/* printf("straddles: x = %g\t", x); */
/* crosses ray if strictly positive intersection. */
if (x > 0) Rcross++;
}
/* printf("Right cross=%d\t", Rcross); */
/* if e straddles the x-axis when reversed... */
/* if( ( ( P[i] .y < 0 ) && ( P[i1].y >= 0 ) ) ||
( ( P[i1].y < 0 ) && ( P[i] .y >= 0 ) ) ) { */
if ( (( P[i].y - yy ) < 0 ) != (( P[i1].y - yy ) < 0 ) ) {
/* e straddles ray, so compute intersection with ray. */
x = (( P[i].x - xx) *( P[i1].y - yy ) -( P[i1].x - xx ) *( P[i].y - yy )) /
(P[i1].y - P[i].y);
/* printf("straddles: x = %g\t", x); */
/* crosses ray if strictly positive intersection. */
if (x < 0) Lcross++;
}
/* printf("Left cross=%d\n", Lcross); */
}
/* q on the edge if left and right cross are not the same parity. */
if( ( Rcross % 2 ) != (Lcross % 2 ) )
return 'e';
/* q inside iff an odd number of crossings. */
if( (Rcross % 2) == 1 )
return 'i';
else return 'o';
}
/*------------------------------ EDGES ------------------------------*/
void read_edges(void)
{
int i,n;
int n_edges /* ,n_edges_total=0 */ ;
POLYGON **edges;
int *n_edges_polys;
n = get_n_edges();
if (n <= 0)
return;
/* get at local */
/* edges = get_edges(); */
edges = emalloc(n*sizeof(POLYGON*));
/* n_edges_polys = get_n_edges_polys(); */
n_edges_polys = emalloc(n*sizeof(int));
/* ... read data in .. */
for (i=0; i<n; i++) { /* over all files */
edges[i]=read_polygons(get_edges_name(i),&n_edges, NULL);
/* n_edges_total+=n_edges; */
n_edges_polys[i]=n_edges;
}
/* ... and set back */
set_edges(edges);
set_n_edges_polys(n_edges_polys);
/* set_n_edges(n_edges_total); */
}
void check_edges(DATA *d, const DPOINT *where) {
#define BAD FLT_MAX
/* Goes as follows : in the list d->sel set u.dist2 to
BAD==FLT_MAX for the points failed through line-of-sight
test. Then sort d->sel by u.dist2 and decrease d->n_sel by the
number of points with u.dist2==BAD */
int i,j,n_sel_edges,n;
int p_i_p_result;
char InPolyRes;
int culled;
unsigned int bad;
int *n_edges_polys;
POLYGON **edges;
POLYGON *current_edge;
PLOT_POINT p, p_where;
static POLYGON **sel_edges = NULL;
static int *point_edge_rel = NULL;
static int n_alloc_edges = 0;
n = get_n_edges();
if (n <= 0)
return;
/* get at local */
edges = get_edges();
n_edges_polys = get_n_edges_polys();
p_where.x=where->x;
p_where.y=where->y;
/* make a list of all relevant edges */
n_sel_edges = 0;
/* find relevant edges and also check if *where is inside/outside
of edge for closed polynoms or which subdivision *where in for open edges */
for (i=0; i<n; i++) { /* over files */
for (j=0; j<n_edges_polys[i]; j++) {
current_edge=&(edges[i][j]);
/* check if edge extents are in vicinity of estimation point */
/* basically we'll check it if point is in box+sel_rad (on both sides) */
/* from check_edges of SPJ */
if ((where->x > current_edge->mbr.min.x - d->sel_rad) /*ltx */
&& (where->x < current_edge->mbr.max.x + d->sel_rad) /*rbx */
&& (where->y > current_edge->mbr.min.y - d->sel_rad) /*rby */
&& (where->y < current_edge->mbr.max.y + d->sel_rad)) /*lty*/
{
#define IN_OUT(_a) ((_a) == 'i' ? POLY_IN : ((_a) == 'o' ? POLY_OUT : POLY_EDGE))
if (current_edge->close) {
InPolyRes=InPoly(p_where, current_edge);
p_i_p_result=IN_OUT(InPolyRes);
/* don't use, if target on edge */
if (p_i_p_result == POLY_EDGE) continue;
} else { /* do nothing at the moment, any ideas are welcome:
malakhanov@iwwl.rwth-aachen.de
*/
p_i_p_result = POLY_IN;
}
if (n_sel_edges+1>n_alloc_edges) {
n_alloc_edges = n_sel_edges+1;
sel_edges = erealloc(sel_edges,n_alloc_edges*sizeof(POLYGON*));
point_edge_rel = erealloc(point_edge_rel,n_alloc_edges*sizeof(int));
}
sel_edges[n_sel_edges]=current_edge;
point_edge_rel[n_sel_edges]=p_i_p_result;
n_sel_edges++;
}
}
}
if (n_sel_edges==0)
return; /* no relevant edges */
culled=0;
/* loop over all so far selected points */
for (i=0; i<d->n_sel; i++) {
p.x = d->sel[i]->x;
p.y = d->sel[i]->y;
for (j=0; j<n_sel_edges; j++) { /* over all selected edges */
if ( sel_edges[j]->close) {
/* InPolyRes=point_in_polygon(p, sel_edges[j]); */
InPolyRes = InPoly(p, sel_edges[j]);
p_i_p_result = IN_OUT(InPolyRes);
if (p_i_p_result == POLY_EDGE) continue;
bad = (p_i_p_result != point_edge_rel[j]);
} else {
/* check line-of-sight between data and target point for this edge */
bad = check_open_edges(p, point_edge_rel[j], p_where, sel_edges[j]);
}
if (bad) {
d->sel[i]->u.dist2 = BAD;
culled++;
break;
}
}
} /* end of loop over all selected points */
/* now look how bad (good) it was: */
if (culled == 0)
return;
/* otherwise sort d->sel by dist2 (u.dist2 is smaller then BAD, so it comes out first:*/
qsort(d->sel, (size_t) d->n_sel, sizeof(DPOINT *),
(int CDECL (*)(const void *,const void *)) dist_cmp);
/* and set d->n_sel to the number of GOOD ones */
d->n_sel -= culled;
return;
}
#undef IN_OUT
#undef BAD
/* the rest is modified from SPJ: */
unsigned char line_of_sight(const PLOT_POINT data, const PLOT_POINT target,
const POLYGON *p_obj) {
int i;
unsigned int code;
unsigned int crossings = 0;
/* go through each segment to find out if it crosses line between data-target */
for(i=0; i<p_obj->lines-1; i++) { /*we have really lines points */
code = segment_cross_check(data, target, p_obj->p[i], p_obj->p[i+1], NULL, NULL);
if (code==CROSS) { /* a simple intersection between data-target and the segment */
crossings++;
continue;
}
if ((code&SPOINT1) || (code&EPOINT1)) return 0; /* data or target at the edge
skip this edge completly */
}
return(crossings);
}
/*
----------------------------------------------------------------------
http://www.cis.ohio-state.edu/hypertext/faq/usenet/graphics/algorithms-faq/faq.html
Subject 1.03: How do I find intersections of 2 2D line segments?
This problem can be extremely easy or extremely difficult depends
on your applications. If all you want is the intersection point,
the following should work:
Let A,B,C,D be 2-space position vectors. Then the directed line
segments AB & CD are given by:
AB=A+r(B-A), r in [0,1]
CD=C+s(D-C), s in [0,1]
If AB & CD intersect, then
A+r(B-A)=C+s(D-C), or
Ax+r(Bx-Ax)=Cx+s(Dx-Cx)
Ay+r(By-Ay)=Cy+s(Dy-Cy) for some r,s in [0,1]
Solving the above for r and s yields
(Ay-Cy)(Dx-Cx)-(Ax-Cx)(Dy-Cy)
r = ----------------------------- (eqn 1)
(Bx-Ax)(Dy-Cy)-(By-Ay)(Dx-Cx)
(Ay-Cy)(Bx-Ax)-(Ax-Cx)(By-Ay)
s = ----------------------------- (eqn 2)
(Bx-Ax)(Dy-Cy)-(By-Ay)(Dx-Cx)
Let P be the position vector of the intersection point, then
P=A+r(B-A) or
Px=Ax+r(Bx-Ax)
Py=Ay+r(By-Ay)
By examining the values of r & s, you can also determine some
other limiting conditions:
If 0<=r<=1 & 0<=s<=1, intersection exists
r<0 or r>1 or s<0 or s>1 line segments do not intersect
If the denominator in eqn 1 is zero, AB & CD are parallel
If the numerator in eqn 1 is also zero, AB & CD are coincident
If the intersection point of the 2 lines are needed (lines in this
context mean infinite lines) regardless whether the two line
segments intersect, then
If r>1, P is located on extension of AB
If r<0, P is located on extension of BA
If s>1, P is located on extension of CD
If s<0, P is located on extension of DC
Also note that the denominators of eqn 1 & 2 are identical.
References:
[O'Rourke (C)] pp. 249-51
[Gems III] pp. 199-202 "Faster Line Segment Intersection,"
*/
static unsigned int segment_cross_check(PLOT_POINT A, PLOT_POINT B,
PLOT_POINT C, PLOT_POINT D, double *R, double *S) {
double uan,ubn,d,r,s;
unsigned int code = 0;
/* calculates if two line segments cross and checks if the crossing point is at
the start or endpoint of the segments */
if (B.x == A.x && B.y == A.y) return code;
d = (D.y-C.y)*(B.x-A.x) - (D.x-C.x)*(B.y-A.y);
if (fabs(d)<FLT_MIN) /* parallel OR coincident*/
return segment_parallel_check(A, B, C, D);
uan = ((D.x-C.x)*(A.y-C.y) - (D.y-C.y)*(A.x-C.x)); /* for r */
ubn = ((B.x-A.x)*(A.y-C.y) - (B.y-A.y)*(A.x-C.x)); /* for s */
r=uan/d;
s=ubn/d;
if (R) *R=r;
if (S) *S=s;
/* line segments do not intersect between (A,B) & (C,D)*/
if ((r < 0.0) || (r > 1.0) || (s < 0.0) || (s > 1.0)) return code;
code |= CROSS; /* lines cross somewhere between endpoints */
if (r == 0.0 ) {
/* intersection at start of segment 1 */
code |= SPOINT1;
} else if (r == 1.0) {
/* cross at endpoint of line 1 */
code |= EPOINT1;
}
if (s == 0.0) {
/* intersection at start of segment 2 */
code |= SPOINT2;
} else if (s == 1.0) {
/* cross at endpoint of line 2 */
code |= EPOINT2;
}
return code;
}
/* check special case of lines through (A,B) and (C,D) being parallel */
static unsigned int segment_parallel_check(PLOT_POINT A, PLOT_POINT B,
PLOT_POINT C, PLOT_POINT D) {
unsigned int code = 0;
/* remember, A- data point, B- target, C - segment start, D -segment end */
/* first check A,B,C on one line or parallel */
if ((B.x - A.x)*(C.y - A.y) != (C.x - A.x)*(B.y - A.y))
return code; /* not on one line, i.e. are parallel */
if ( segment_between_check( C, D, A ) ) /* data at polyline */
code |= SPOINT1;
if ( segment_between_check( C, D, B ) ) /* target at polyline */
code |= EPOINT1;
if ( segment_between_check( A, B, C) ) /* data at polyline */
code |= SPOINT2;
if ( segment_between_check( A, B, D ) ) /* target at polyline */
code |= EPOINT2;
if (code) code|=CROSS;
return code;
}
/* check the c is between a and b */
static int segment_between_check(PLOT_POINT a, PLOT_POINT b, PLOT_POINT c) {
if ( a.x != b.x )
return ((a.x <= c.x) && (c.x <= b.x)) ||
((a.x >= c.x) && (c.x >= b.x));
else
return ((a.y <= c.y) && (c.y <= b.y)) ||
((a.y >= c.y) && (c.y >= b.y));
}
/*
----------------------------------------------------------------------
http://www.cis.ohio-state.edu/hypertext/faq/usenet/graphics/algorithms-faq/faq.html
Subject 1.02: How do I find the distance from a point to a line?
Let the point be C (Cx,Cy) and the line be AB (Ax,Ay) to (Bx,By).
The length of the line segment AB is L:
L= sqrt( (Bx-Ax)^2 + (By-Ay)^2 ) .
Let P be the point of perpendicular projection of C onto AB.
Let r be a parameter to indicate P's location along the line
containing AB, with the following meaning:
r=0 P = A
r=1 P = B
r<0 P is on the backward extension of AB
r>1 P is on the forward extension of AB
0<r<1 P is interior to AB
Compute r with this:
(Ay-Cy)(Ay-By)-(Ax-Cx)(Bx-Ax)
r = -----------------------------
L^2
The point P can then be found:
Px = Ax + r(Bx-Ax)
Py = Ay + r(By-Ay)
And the distance from A to P = r*L.
Use another parameter s to indicate the location along PC, with the
following meaning:
s<0 C is left of AB
s>0 C is right of AB
s=0 C is on AB
Compute s as follows:
(Ay-Cy)(Bx-Ax)-(Ax-Cx)(By-Ay)
s = -----------------------------
L^2
Then the distance from C to P = s*L.
*/
static int CDECL dist_cmp(const DPOINT **pa, const DPOINT **pb) {
/* ANSI qsort() conformant dist_cmp */
if ( (*pa)->u.dist2 < (*pb)->u.dist2 )
return -1;
if ( (*pa)->u.dist2 > (*pb)->u.dist2 )
return 1;
return 0;
}
static unsigned int check_open_edges(const PLOT_POINT data, const int target_side,
const PLOT_POINT target, const POLYGON *p_obj) {
int los=line_of_sight(data,target,p_obj);
return (los % 2);
}
void setup_poly_minmax(POLYGON *pl) {
int i, n=pl->lines;
double minx,maxx,miny,maxy;
minx=miny=DBL_MAX;
maxx=maxy=-DBL_MAX;
for (i=0;i<n;i++) {
minx = MIN(minx, pl->p[i].x);
miny = MIN(miny, pl->p[i].y);
maxx = MAX(maxx, pl->p[i].x);
maxy = MAX(maxy, pl->p[i].y);
}
pl->mbr.min.x = minx;
pl->mbr.min.y = miny;
pl->mbr.max.x = maxx;
pl->mbr.max.y = maxy;
}
#undef CROSS
#undef SPOINT1
#undef SPOINT2
#undef EPOINT1
#undef EPOINT2
#undef POLY_IN
#undef POLY_OUT
#undef POLY_EDGE
#undef IWW
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...