Revision b074cf80a7d40fefe1f4063c9841232171e8daea authored by Wolfram Sang on 05 November 2014, 22:44:11 UTC, committed by Wolfram Sang on 19 December 2014, 18:32:47 UTC
The new driver is around for more than 2 years now, so the old one can go. Getting rid of it helps the removal of the legacy .attach_adapter callback of the I2C subsystem. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
1 parent f16ea4f
adis16220_core.c
/*
* ADIS16220 Programmable Digital Vibration Sensor driver
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include "adis16220.h"
static ssize_t adis16220_read_16bit(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct adis16220_state *st = iio_priv(indio_dev);
ssize_t ret;
s16 val = 0;
/* Take the iio_dev status lock */
mutex_lock(&indio_dev->mlock);
ret = adis_read_reg_16(&st->adis, this_attr->address,
(u16 *)&val);
mutex_unlock(&indio_dev->mlock);
if (ret)
return ret;
return sprintf(buf, "%d\n", val);
}
static ssize_t adis16220_write_16bit(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
struct adis16220_state *st = iio_priv(indio_dev);
int ret;
u16 val;
ret = kstrtou16(buf, 10, &val);
if (ret)
goto error_ret;
ret = adis_write_reg_16(&st->adis, this_attr->address, val);
error_ret:
return ret ? ret : len;
}
static int adis16220_capture(struct iio_dev *indio_dev)
{
struct adis16220_state *st = iio_priv(indio_dev);
int ret;
/* initiates a manual data capture */
ret = adis_write_reg_16(&st->adis, ADIS16220_GLOB_CMD, 0xBF08);
if (ret)
dev_err(&indio_dev->dev, "problem beginning capture");
usleep_range(10000, 11000); /* delay for capture to finish */
return ret;
}
static ssize_t adis16220_write_capture(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
bool val;
int ret;
ret = strtobool(buf, &val);
if (ret)
return ret;
if (!val)
return -EINVAL;
ret = adis16220_capture(indio_dev);
if (ret)
return ret;
return len;
}
static ssize_t adis16220_capture_buffer_read(struct iio_dev *indio_dev,
char *buf,
loff_t off,
size_t count,
int addr)
{
struct adis16220_state *st = iio_priv(indio_dev);
struct spi_transfer xfers[] = {
{
.tx_buf = st->tx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
}, {
.tx_buf = st->tx,
.rx_buf = st->rx,
.bits_per_word = 8,
.cs_change = 1,
.delay_usecs = 25,
},
};
int ret;
int i;
if (unlikely(!count))
return count;
if ((off >= ADIS16220_CAPTURE_SIZE) || (count & 1) || (off & 1))
return -EINVAL;
if (off + count > ADIS16220_CAPTURE_SIZE)
count = ADIS16220_CAPTURE_SIZE - off;
/* write the begin position of capture buffer */
ret = adis_write_reg_16(&st->adis,
ADIS16220_CAPT_PNTR,
off > 1);
if (ret)
return -EIO;
/* read count/2 values from capture buffer */
mutex_lock(&st->buf_lock);
for (i = 0; i < count; i += 2) {
st->tx[i] = ADIS_READ_REG(addr);
st->tx[i + 1] = 0;
}
xfers[1].len = count;
ret = spi_sync_transfer(st->adis.spi, xfers, ARRAY_SIZE(xfers));
if (ret) {
mutex_unlock(&st->buf_lock);
return -EIO;
}
memcpy(buf, st->rx, count);
mutex_unlock(&st->buf_lock);
return count;
}
static ssize_t adis16220_accel_bin_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf,
loff_t off,
size_t count)
{
struct iio_dev *indio_dev = dev_to_iio_dev(kobj_to_dev(kobj));
return adis16220_capture_buffer_read(indio_dev, buf,
off, count,
ADIS16220_CAPT_BUFA);
}
static struct bin_attribute accel_bin = {
.attr = {
.name = "accel_bin",
.mode = S_IRUGO,
},
.read = adis16220_accel_bin_read,
.size = ADIS16220_CAPTURE_SIZE,
};
static ssize_t adis16220_adc1_bin_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf, loff_t off,
size_t count)
{
struct iio_dev *indio_dev = dev_to_iio_dev(kobj_to_dev(kobj));
return adis16220_capture_buffer_read(indio_dev, buf,
off, count,
ADIS16220_CAPT_BUF1);
}
static struct bin_attribute adc1_bin = {
.attr = {
.name = "in0_bin",
.mode = S_IRUGO,
},
.read = adis16220_adc1_bin_read,
.size = ADIS16220_CAPTURE_SIZE,
};
static ssize_t adis16220_adc2_bin_read(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr,
char *buf, loff_t off,
size_t count)
{
struct iio_dev *indio_dev = dev_to_iio_dev(kobj_to_dev(kobj));
return adis16220_capture_buffer_read(indio_dev, buf,
off, count,
ADIS16220_CAPT_BUF2);
}
static struct bin_attribute adc2_bin = {
.attr = {
.name = "in1_bin",
.mode = S_IRUGO,
},
.read = adis16220_adc2_bin_read,
.size = ADIS16220_CAPTURE_SIZE,
};
#define IIO_DEV_ATTR_CAPTURE(_store) \
IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)
static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);
#define IIO_DEV_ATTR_CAPTURE_COUNT(_mode, _show, _store, _addr) \
IIO_DEVICE_ATTR(capture_count, _mode, _show, _store, _addr)
static IIO_DEV_ATTR_CAPTURE_COUNT(S_IWUSR | S_IRUGO,
adis16220_read_16bit,
adis16220_write_16bit,
ADIS16220_CAPT_PNTR);
enum adis16220_channel {
in_supply, in_1, in_2, accel, temp
};
struct adis16220_address_spec {
u8 addr;
u8 bits;
bool sign;
};
/* Address / bits / signed */
static const struct adis16220_address_spec adis16220_addresses[][3] = {
[in_supply] = { { ADIS16220_CAPT_SUPPLY, 12, 0 }, },
[in_1] = { { ADIS16220_CAPT_BUF1, 16, 1 },
{ ADIS16220_AIN1_NULL, 16, 1 },
{ ADIS16220_CAPT_PEAK1, 16, 1 }, },
[in_2] = { { ADIS16220_CAPT_BUF2, 16, 1 },
{ ADIS16220_AIN2_NULL, 16, 1 },
{ ADIS16220_CAPT_PEAK2, 16, 1 }, },
[accel] = { { ADIS16220_CAPT_BUFA, 16, 1 },
{ ADIS16220_ACCL_NULL, 16, 1 },
{ ADIS16220_CAPT_PEAKA, 16, 1 }, },
[temp] = { { ADIS16220_CAPT_TEMP, 12, 0 }, }
};
static int adis16220_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct adis16220_state *st = iio_priv(indio_dev);
const struct adis16220_address_spec *addr;
int ret = -EINVAL;
int addrind = 0;
u16 uval;
s16 sval;
u8 bits;
switch (mask) {
case IIO_CHAN_INFO_RAW:
addrind = 0;
break;
case IIO_CHAN_INFO_OFFSET:
if (chan->type == IIO_TEMP) {
*val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
}
addrind = 1;
break;
case IIO_CHAN_INFO_PEAK:
addrind = 2;
break;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_TEMP:
*val = -470; /* -0.47 C */
*val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val2 = IIO_G_TO_M_S_2(19073); /* 19.073 g */
return IIO_VAL_INT_PLUS_MICRO;
case IIO_VOLTAGE:
if (chan->channel == 0) {
*val = 1;
*val2 = 220700; /* 1.2207 mV */
} else {
/* Should really be dependent on VDD */
*val2 = 305180; /* 305.18 uV */
}
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
default:
return -EINVAL;
}
addr = &adis16220_addresses[chan->address][addrind];
if (addr->sign) {
ret = adis_read_reg_16(&st->adis, addr->addr, &sval);
if (ret)
return ret;
bits = addr->bits;
sval &= (1 << bits) - 1;
sval = (s16)(sval << (16 - bits)) >> (16 - bits);
*val = sval;
return IIO_VAL_INT;
}
ret = adis_read_reg_16(&st->adis, addr->addr, &uval);
if (ret)
return ret;
bits = addr->bits;
uval &= (1 << bits) - 1;
*val = uval;
return IIO_VAL_INT;
}
static const struct iio_chan_spec adis16220_channels[] = {
{
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
.extend_name = "supply",
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SCALE),
.address = in_supply,
}, {
.type = IIO_ACCEL,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_PEAK),
.address = accel,
}, {
.type = IIO_TEMP,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
.address = temp,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
.address = in_1,
}, {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 2,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.address = in_2,
}
};
static struct attribute *adis16220_attributes[] = {
&iio_dev_attr_capture.dev_attr.attr,
&iio_dev_attr_capture_count.dev_attr.attr,
NULL
};
static const struct attribute_group adis16220_attribute_group = {
.attrs = adis16220_attributes,
};
static const struct iio_info adis16220_info = {
.attrs = &adis16220_attribute_group,
.driver_module = THIS_MODULE,
.read_raw = &adis16220_read_raw,
};
static const char * const adis16220_status_error_msgs[] = {
[ADIS16220_DIAG_STAT_VIOLATION_BIT] = "Capture period violation/interruption",
[ADIS16220_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16220_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
[ADIS16220_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16220_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16220_data = {
.read_delay = 35,
.write_delay = 35,
.msc_ctrl_reg = ADIS16220_MSC_CTRL,
.glob_cmd_reg = ADIS16220_GLOB_CMD,
.diag_stat_reg = ADIS16220_DIAG_STAT,
.self_test_mask = ADIS16220_MSC_CTRL_SELF_TEST_EN,
.startup_delay = ADIS16220_STARTUP_DELAY,
.status_error_msgs = adis16220_status_error_msgs,
.status_error_mask = BIT(ADIS16220_DIAG_STAT_VIOLATION_BIT) |
BIT(ADIS16220_DIAG_STAT_SPI_FAIL_BIT) |
BIT(ADIS16220_DIAG_STAT_FLASH_UPT_BIT) |
BIT(ADIS16220_DIAG_STAT_POWER_HIGH_BIT) |
BIT(ADIS16220_DIAG_STAT_POWER_LOW_BIT),
};
static int adis16220_probe(struct spi_device *spi)
{
int ret;
struct adis16220_state *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16220_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = adis16220_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16220_channels);
ret = devm_iio_device_register(&spi->dev, indio_dev);
if (ret)
return ret;
ret = sysfs_create_bin_file(&indio_dev->dev.kobj, &accel_bin);
if (ret)
return ret;
ret = sysfs_create_bin_file(&indio_dev->dev.kobj, &adc1_bin);
if (ret)
goto error_rm_accel_bin;
ret = sysfs_create_bin_file(&indio_dev->dev.kobj, &adc2_bin);
if (ret)
goto error_rm_adc1_bin;
ret = adis_init(&st->adis, indio_dev, spi, &adis16220_data);
if (ret)
goto error_rm_adc2_bin;
/* Get the device into a sane initial state */
ret = adis_initial_startup(&st->adis);
if (ret)
goto error_rm_adc2_bin;
return 0;
error_rm_adc2_bin:
sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc2_bin);
error_rm_adc1_bin:
sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin);
error_rm_accel_bin:
sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin);
return ret;
}
static int adis16220_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc2_bin);
sysfs_remove_bin_file(&indio_dev->dev.kobj, &adc1_bin);
sysfs_remove_bin_file(&indio_dev->dev.kobj, &accel_bin);
return 0;
}
static struct spi_driver adis16220_driver = {
.driver = {
.name = "adis16220",
.owner = THIS_MODULE,
},
.probe = adis16220_probe,
.remove = adis16220_remove,
};
module_spi_driver(adis16220_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("Analog Devices ADIS16220 Digital Vibration Sensor");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16220");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...