Revision b135b3358d73aa2a8b2be35d08e422421d1c609e authored by Miquel Raynal on 19 January 2021, 15:55:10 UTC, committed by Miquel Raynal on 20 January 2021, 22:38:00 UTC
The OMAP driver may leverage software BCH logic to locate errors while using its own hardware to detect the presence of errors. This is achieved with a "mixed" mode which initializes manually the software BCH internal logic while providing its own OOB layout. The issue here comes from the fact that the BCH driver has been updated to only use generic NAND objects, and no longer depend on raw NAND structures as it is usable from SPI-NAND as well. However, at the end of the BCH context initialization, the driver checks the validity of the OOB layout. At this stage, the raw NAND fields have not been populated yet while being used by the layout helpers, leading to an invalid layout. The chosen solution here is to include the BCH structure definition and to refer to the BCH fields directly (de-referenced as a const pointer here) to know as early as possible the number of steps and ECC bytes which have been chosen. Note: I don't know which commit exactly triggered the error, but the entire migration to a generic BCH driver got merged in one go, so this should not be a problem for stable backports. Reported-by: Adam Ford <aford173@gmail.com> Fixes: 80fe603160a4 ("mtd: nand: ecc-bch: Stop using raw NAND structures") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit-28.dts Link: https://lore.kernel.org/linux-mtd/20210119155510.5655-1-miquel.raynal@bootlin.com
1 parent e708789
plist.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* lib/plist.c
*
* Descending-priority-sorted double-linked list
*
* (C) 2002-2003 Intel Corp
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>.
*
* 2001-2005 (c) MontaVista Software, Inc.
* Daniel Walker <dwalker@mvista.com>
*
* (C) 2005 Thomas Gleixner <tglx@linutronix.de>
*
* Simplifications of the original code by
* Oleg Nesterov <oleg@tv-sign.ru>
*
* Based on simple lists (include/linux/list.h).
*
* This file contains the add / del functions which are considered to
* be too large to inline. See include/linux/plist.h for further
* information.
*/
#include <linux/bug.h>
#include <linux/plist.h>
#ifdef CONFIG_DEBUG_PLIST
static struct plist_head test_head;
static void plist_check_prev_next(struct list_head *t, struct list_head *p,
struct list_head *n)
{
WARN(n->prev != p || p->next != n,
"top: %p, n: %p, p: %p\n"
"prev: %p, n: %p, p: %p\n"
"next: %p, n: %p, p: %p\n",
t, t->next, t->prev,
p, p->next, p->prev,
n, n->next, n->prev);
}
static void plist_check_list(struct list_head *top)
{
struct list_head *prev = top, *next = top->next;
plist_check_prev_next(top, prev, next);
while (next != top) {
prev = next;
next = prev->next;
plist_check_prev_next(top, prev, next);
}
}
static void plist_check_head(struct plist_head *head)
{
if (!plist_head_empty(head))
plist_check_list(&plist_first(head)->prio_list);
plist_check_list(&head->node_list);
}
#else
# define plist_check_head(h) do { } while (0)
#endif
/**
* plist_add - add @node to @head
*
* @node: &struct plist_node pointer
* @head: &struct plist_head pointer
*/
void plist_add(struct plist_node *node, struct plist_head *head)
{
struct plist_node *first, *iter, *prev = NULL;
struct list_head *node_next = &head->node_list;
plist_check_head(head);
WARN_ON(!plist_node_empty(node));
WARN_ON(!list_empty(&node->prio_list));
if (plist_head_empty(head))
goto ins_node;
first = iter = plist_first(head);
do {
if (node->prio < iter->prio) {
node_next = &iter->node_list;
break;
}
prev = iter;
iter = list_entry(iter->prio_list.next,
struct plist_node, prio_list);
} while (iter != first);
if (!prev || prev->prio != node->prio)
list_add_tail(&node->prio_list, &iter->prio_list);
ins_node:
list_add_tail(&node->node_list, node_next);
plist_check_head(head);
}
/**
* plist_del - Remove a @node from plist.
*
* @node: &struct plist_node pointer - entry to be removed
* @head: &struct plist_head pointer - list head
*/
void plist_del(struct plist_node *node, struct plist_head *head)
{
plist_check_head(head);
if (!list_empty(&node->prio_list)) {
if (node->node_list.next != &head->node_list) {
struct plist_node *next;
next = list_entry(node->node_list.next,
struct plist_node, node_list);
/* add the next plist_node into prio_list */
if (list_empty(&next->prio_list))
list_add(&next->prio_list, &node->prio_list);
}
list_del_init(&node->prio_list);
}
list_del_init(&node->node_list);
plist_check_head(head);
}
/**
* plist_requeue - Requeue @node at end of same-prio entries.
*
* This is essentially an optimized plist_del() followed by
* plist_add(). It moves an entry already in the plist to
* after any other same-priority entries.
*
* @node: &struct plist_node pointer - entry to be moved
* @head: &struct plist_head pointer - list head
*/
void plist_requeue(struct plist_node *node, struct plist_head *head)
{
struct plist_node *iter;
struct list_head *node_next = &head->node_list;
plist_check_head(head);
BUG_ON(plist_head_empty(head));
BUG_ON(plist_node_empty(node));
if (node == plist_last(head))
return;
iter = plist_next(node);
if (node->prio != iter->prio)
return;
plist_del(node, head);
plist_for_each_continue(iter, head) {
if (node->prio != iter->prio) {
node_next = &iter->node_list;
break;
}
}
list_add_tail(&node->node_list, node_next);
plist_check_head(head);
}
#ifdef CONFIG_DEBUG_PLIST
#include <linux/sched.h>
#include <linux/sched/clock.h>
#include <linux/module.h>
#include <linux/init.h>
static struct plist_node __initdata test_node[241];
static void __init plist_test_check(int nr_expect)
{
struct plist_node *first, *prio_pos, *node_pos;
if (plist_head_empty(&test_head)) {
BUG_ON(nr_expect != 0);
return;
}
prio_pos = first = plist_first(&test_head);
plist_for_each(node_pos, &test_head) {
if (nr_expect-- < 0)
break;
if (node_pos == first)
continue;
if (node_pos->prio == prio_pos->prio) {
BUG_ON(!list_empty(&node_pos->prio_list));
continue;
}
BUG_ON(prio_pos->prio > node_pos->prio);
BUG_ON(prio_pos->prio_list.next != &node_pos->prio_list);
prio_pos = node_pos;
}
BUG_ON(nr_expect != 0);
BUG_ON(prio_pos->prio_list.next != &first->prio_list);
}
static void __init plist_test_requeue(struct plist_node *node)
{
plist_requeue(node, &test_head);
if (node != plist_last(&test_head))
BUG_ON(node->prio == plist_next(node)->prio);
}
static int __init plist_test(void)
{
int nr_expect = 0, i, loop;
unsigned int r = local_clock();
printk(KERN_DEBUG "start plist test\n");
plist_head_init(&test_head);
for (i = 0; i < ARRAY_SIZE(test_node); i++)
plist_node_init(test_node + i, 0);
for (loop = 0; loop < 1000; loop++) {
r = r * 193939 % 47629;
i = r % ARRAY_SIZE(test_node);
if (plist_node_empty(test_node + i)) {
r = r * 193939 % 47629;
test_node[i].prio = r % 99;
plist_add(test_node + i, &test_head);
nr_expect++;
} else {
plist_del(test_node + i, &test_head);
nr_expect--;
}
plist_test_check(nr_expect);
if (!plist_node_empty(test_node + i)) {
plist_test_requeue(test_node + i);
plist_test_check(nr_expect);
}
}
for (i = 0; i < ARRAY_SIZE(test_node); i++) {
if (plist_node_empty(test_node + i))
continue;
plist_del(test_node + i, &test_head);
nr_expect--;
plist_test_check(nr_expect);
}
printk(KERN_DEBUG "end plist test\n");
return 0;
}
module_init(plist_test);
#endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...