| b1c6cd4 | Atsushi Nemoto | 02 July 2006, 15:09:47 UTC | [MIPS] Make SPARSEMEM selectable on QEMU. This might be helpfull to debug sparsemem on mips. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:59 UTC |
| a5e6898 | Yoichi Yuasa | 02 July 2006, 14:17:27 UTC | [MIPS] Au1000: Remove au1000 code. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:59 UTC |
| a722df0 | Yoichi Yuasa | 02 July 2006, 14:13:34 UTC | [MIPS] vr41xx: Removed unused definitions for NEC CMBVR4133. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:59 UTC |
| 722cfd9 | Ralf Baechle | 02 July 2006, 15:31:14 UTC | [MIPS] Wire up vmsplice(2) and move_pages(2). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:59 UTC |
| 94dee17 | Ralf Baechle | 02 July 2006, 13:41:42 UTC | [MIPS] Eleminate interrupt migration helper use. > #define hw_interrupt_type irq_chip > typedef struct irq_chip hw_irq_controller; > #define no_irq_type no_irq_chip > typedef struct irq_desc irq_desc_t; Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:58 UTC |
| e1e80b4 | Ralf Baechle | 01 July 2006, 21:07:23 UTC | [MIPS] Don't include obsolete <linux/config.h>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:58 UTC |
| 2e128de | Chris Dearman | 30 June 2006, 11:32:37 UTC | [MIPS] Default cpu_has_mipsmt to a runtime check Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:58 UTC |
| 70ae612 | Chris Dearman | 30 June 2006, 11:32:37 UTC | [MIPS] Use KERN_DEBUG to log the SDBBP messages Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:57 UTC |
| e35a5e3 | Chris Dearman | 30 June 2006, 13:19:45 UTC | [MIPS] Less noise on multithreading exceptions. Make the MT handler silent and output the MT exception type at debug priority. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:57 UTC |
| 98ab66c | Ralf Baechle | 13 July 2006, 20:25:57 UTC | [MIPS] Update defconfigs to 2.6.18-rc1. | 13 July 2006, 20:25:57 UTC |
| 8717433 | Ralf Baechle | 25 June 2006, 15:42:21 UTC | [MIPS] IP27: Don't destroy interrupt routing information on shutdown irq. This fixes the "not syncing: Could not identify cpu/level ..." panic when a PCI irq is requested the second time. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:56 UTC |
| 2596935 | Ralf Baechle | 22 June 2006, 21:42:32 UTC | [MIPS] Avoid interprocessor function calls. On the 34K where multiple virtual processors are implemented in a single core and share a single TLB, interprocessor function calls are not needed to flush a cache, so avoid them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 July 2006, 20:25:56 UTC |
| f1aaee5 | Arjan van de Ven | 13 July 2006, 12:46:03 UTC | [PATCH] lockdep: annotate mm/slab.c mm/slab.c uses nested locking when dealing with 'off-slab' caches, in that case it allocates the slab header from the (on-slab) kmalloc caches. Teach the lock validator about this by putting all on-slab caches into a separate class. this patch has no effect on non-lockdep kernels. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 July 2006, 19:02:44 UTC |
| 873623d | Ingo Molnar | 13 July 2006, 12:44:38 UTC | [PATCH] lockdep: undo mm/slab.c annotation undo existing mm/slab.c lock-validator annotations, in preparation of a new, less intrusive annotation patch. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 July 2006, 19:02:44 UTC |
| 0e2ffbf | Linus Torvalds | 13 July 2006, 14:53:11 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 of HEAD * HEAD: [SPARC]: Fix OF register translations under sub-PCI busses. [SPARC64]: Refine Sabre wsync logic. [SERIAL] sunsu: Handle keyboard and mouse ports directly. [SPARC64]: Fix 2 bugs in sabre_irq_build() [SPARC64]: Update defconfig. [SPARC64]: Fix make headers_install [SPARC64]: of_device_register() error checking fix | 13 July 2006, 14:53:11 UTC |
| 1b0f06d | Greg Ungerer | 12 July 2006, 23:32:41 UTC | [PATCH] m68knommu: fix result type in get_user() macro Keep the result holder variable the same type as the quantity we are retreiving in the get_user() macro - don't go through a pointer version of the user space address type. Using the address type causes problems if the address type was const (newer versions of gcc quite rightly error out for that condition). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 July 2006, 14:51:48 UTC |
| b43c7ce | Chuck Ebbert | 12 July 2006, 20:41:15 UTC | [PATCH] i386: system.h: remove extra semicolons and fix order include/asm-i386/system.h has trailing semicolons in some of the macros that cause legitimate code to fail compilation, so remove them. Also remove extra blank lines within one group of macros. And put stts() and clts() back together; they got separated somehow. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 July 2006, 14:48:28 UTC |
| a83f982 | David S. Miller | 13 July 2006, 06:19:31 UTC | [SPARC]: Fix OF register translations under sub-PCI busses. There is an implicit assumption in the code that ranges will translate to something that can fit in 2 32-bit cells, or a 64-bit value. For certain kinds of things below PCI this isn't necessarily true. Here is what the relevant OF device hierarchy looks like for one of the serial controllers on an Ultra5: Node 0xf005f1e0 ranges: 00000000.00000000.00000000.000001fe.01000000.00000000.01000000 01000000.00000000.00000000.000001fe.02000000.00000000.01000000 02000000.00000000.00000000.000001ff.00000000.00000001.00000000 03000000.00000000.00000000.000001ff.00000000.00000001.00000000 device_type: 'pci' model: 'SUNW,sabre' Node 0xf005f9d4 device_type: 'pci' model: 'SUNW,simba' Node 0xf0060d24 ranges: 00000010.00000000 82010810.00000000.f0000000 01000000 00000014.00000000 82010814.00000000.f1000000 00800000 name: 'ebus' Node 0xf0062dac reg: 00000014.003083f8.00000008 --> 0x1ff.f13083f8 device_type: 'serial' name: 'su' So the correct translation here is: 1) Match "su" register to second ranges entry of 'ebus', which translates into a PCI triplet "82010814.00000000.f1000000" of size 00800000, which gives us "82010814.00000000.f13083f8". 2) Pass-through "SUNW,simba" since it lacks ranges property 3) Match "82010814.00000000.f13083f8" to third ranges property of PCI controller node 'SUNW,sabre', and we arrive at the final physical MMIO address of "0x1fff13083f8". Due to the 2-cell assumption, we couldn't translate to a PCI 3-cell value, and we couldn't perform a pass-thru on it either. It was easiest to just stop splitting the ranges application operation between two methods, ->map and ->translate, and just let ->map do all the work. That way it would work purely on 32-bit cell arrays instead of having to "return" some value like a u64. It's still not %100 correct because the out-of-range check is still done using the 64 least significant bits of the range and address. But it does work for all the cases I've thrown at it so far. Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:15 UTC |
| 9bbd952 | David S. Miller | 13 July 2006, 04:16:07 UTC | [SPARC64]: Refine Sabre wsync logic. It is only needed when there is a PCI-PCI bridge sitting between the device and the PCI host controller which is not a Simba APB bridge. Add logic to handle two special cases: 1) device behind EBUS, which sits on PCI 2) PCI controller interrupts Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:13 UTC |
| 91d1ed1 | David S. Miller | 13 July 2006, 04:04:21 UTC | [SERIAL] sunsu: Handle keyboard and mouse ports directly. The sunsu_ports[] array exists merely to be able to easily use an integer index to get at the proper serial console port struct. We size this only for real ports, not for the keyboard and mouse, and thus keyboard and mouse port registration would fail. Fix this by dynamically allocating the port struct for the keyboard and mouse, instead of using the sunsu_ports[] array. Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:11 UTC |
| a23c3a8 | David S. Miller | 12 July 2006, 22:59:53 UTC | [SPARC64]: Fix 2 bugs in sabre_irq_build() When installing the IRQ pre-handler, we were not setting up the second argument correctly. It should be a pointer to the sabre_irq_data, not the config space PIO address. Furthermore, we only need this pre-handler installed if the device sits behind a PCI bridge that is not Sabre or Simba/APB. Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:08 UTC |
| 17556fe | David S. Miller | 12 July 2006, 21:01:26 UTC | [SPARC64]: Update defconfig. Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:06 UTC |
| 50f73fe | David Woodhouse | 12 July 2006, 20:56:53 UTC | [SPARC64]: Fix make headers_install A minor typo in the include/asm-sparc64/Kbuild file prevents the make headers_install from building a useful tree of kernel headers for sparc64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:04 UTC |
| 6cc8b6f | Andrew Morton | 10 July 2006, 22:28:54 UTC | [SPARC64]: of_device_register() error checking fix device_create_file() can fail. This causes the sparc64 compile to fail when my fanatical __must_check patch is applied, due to -Werror. [ Added necessary identical fix for sparc32. -DaveM] Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 08:50:01 UTC |
| e47f317 | Linus Torvalds | 13 July 2006, 04:19:42 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEAD * HEAD: [NET]: fix __sk_stream_mem_reclaim [Bluetooth] Fix deadlock in the L2CAP layer [Bluetooth] Let BT_HIDP depend on INPUT [Bluetooth] Avoid NULL pointer dereference with tty->driver [Bluetooth] Remaining transitions to use kzalloc() [WAN]: converting generic HDLC to use netif_dormant*() [IPV4]: Fix error handling for fib_insert_node call [NETROM] lockdep: fix false positive [ROSE] lockdep: fix false positive [AX.25]: Optimize AX.25 socket list lock [IPCOMP]: Fix truesize after decompression [IPV6]: Use ipv6_addr_src_scope for link address sorting. [TCP] tcp_highspeed: Fix AI updates. [MAINTAINERS]: Add proper entry for TC classifier [NETROM]: Drop lock before calling nr_destroy_socket [NETROM]: Fix locking order when establishing a NETROM circuit. [AX.25]: Fix locking of ax25 protocol function list. [IPV6]: order addresses by scope | 13 July 2006, 04:19:42 UTC |
| a048640 | Linus Torvalds | 13 July 2006, 04:19:23 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6 of HEAD * HEAD: [PATCH] hwmon: Documentation update for abituguru [PATCH] hwmon: Fix for first generation Abit uGuru chips [PATCH] hwmon: New maintainer for w83791d [PATCH] pca9539: Honor the force parameter [PATCH] i2c-algo-bit: Wipe out dead code [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers [PATCH] i2c: New mailing list [PATCH] i2c-ite: Plan for removal [PATCH] i2c-powermac: Fix master_xfer return value [PATCH] scx200_acb: Fix the block transactions [PATCH] scx200_acb: Fix the state machine [PATCH] i2c-iop3xx: Avoid addressing self [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core | 13 July 2006, 04:19:23 UTC |
| 2513eb8 | Linus Torvalds | 13 July 2006, 04:19:06 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 of HEAD * HEAD: [PATCH] The scheduled unexport of insert_resource [PATCH] remove kernel/power/pm.c:pm_unregister_all() [PATCH] Driver core: bus.c cleanups [PATCH] Driver core: kernel-doc in drivers/base/core.c corrections [PATCH] Driver core: fix driver-core kernel-doc | 13 July 2006, 04:19:06 UTC |
| d3745f4 | Linus Torvalds | 13 July 2006, 04:17:41 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 of HEAD * HEAD: [PATCH] PCI: PCIE power management quirk [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h [PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume [PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort() | 13 July 2006, 04:17:41 UTC |
| 70d002b | Linus Torvalds | 13 July 2006, 04:16:52 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 of HEAD * HEAD: (44 commits) [PATCH] USB: move usb-serial.h to include/linux/usb/ [PATCH] USB: Anydata: Fixes wrong URB callback. [PATCH] USB: gadget section fixups [PATCH] USB: another unusual device [PATCH] USB: Add one VID/PID to ftdi_sio [PATCH] USB: unusual_devs entry for Sony DSC-H5 [PATCH] USB: unusual_devs entry for Nokia E61 [PATCH] USB: unusual_devs entry for Nokia N91 [PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver [PATCH] USB: Option driver: new product ID [PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter [PATCH] USB: ipw.c driver fix [PATCH] USB: remove devfs information from Kconfig [PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c [PATCH] USB: ipaq.c timing parameters [PATCH] USB: ipaq.c bugfixes [PATCH] USB: ehci: fix bogus alteration of a local variable [PATCH] USB: add driver for non-composite Sierra Wireless devices [PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd [PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci ... | 13 July 2006, 04:16:52 UTC |
| 7f0852f | Linus Torvalds | 13 July 2006, 04:16:32 UTC | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/w1-2.6 of HEAD * HEAD: [PATCH] w1: remove drivers/w1/w1.h [PATCH] w1: fix idle check loop in ds2482 [PATCH] W1: remove w1 mail list from lm_sensors. | 13 July 2006, 04:16:32 UTC |
| 2f1b925 | Linus Torvalds | 13 July 2006, 04:04:16 UTC | Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 July 2006, 04:04:16 UTC |
| 72945b2 | Len Brown | 13 July 2006, 02:46:42 UTC | [PATCH] Revert "ACPI: execute Notify() handlers on new thread" This effectively reverts commit b8d35192c55fb055792ff0641408eaaec7c88988 by reverts acpi_os_queue_for_execution() to what it was before that, except it changes the name to acpi_os_execute() to match ACPICA 20060512. Signed-off-by: Len Brown <len.brown@intel.com> [ The thread execution doesn't actually solve the bug it set out to solve (see http://bugzilla.kernel.org/show_bug.cgi?id=5534 for more details) because the new events can get caught behind the AML semaphore or other serialization. And when that happens, the notify threads keep on piling up until the system dies. ] Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 13 July 2006, 04:02:24 UTC |
| a6f157a | Ian McDonald | 13 July 2006, 00:58:53 UTC | [NET]: fix __sk_stream_mem_reclaim __sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim. As such the check on sk->sk_forward_alloc is not needed and can be removed. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 13 July 2006, 00:58:53 UTC |
| dd4a59a | Linus Torvalds | 12 July 2006, 23:32:16 UTC | Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] sky2: optimize receive restart [PATCH] sky2: PHY power on delays [PATCH] sky2: NAPI suspend/resume of dual port cards [PATCH] sky2: sky2_reset section mismatch [PATCH] sk98lin: fix truncated collision threshold mask [PATCH] skge: fix truncated collision threshold mask [PATCH] sky2: fix truncated collision threshold mask [PATCH] myri10ge return value fix [PATCH] Update smc91x driver with ARM Versatile board info [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count [PATCH] smsc-ircc2: fix section reference mismatches [PATCH] 8139cp.c printk fix [PATCH] s2io driver irq fix [PATCH] e1000: irq naming update [PATCH] forcedeth: watermark fixup [PATCH] forcedeth: deferral fixup [PATCH] zd1211rw: usb_clear_halt not allowed in IRQ context [PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noise | 12 July 2006, 23:32:16 UTC |
| cd6ef2a | Adrian Bunk | 30 June 2006, 09:15:42 UTC | [PATCH] The scheduled unexport of insert_resource Implement the scheduled unexport of insert_resource. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:09:08 UTC |
| 26865e9 | Adrian Bunk | 30 June 2006, 09:15:43 UTC | [PATCH] remove kernel/power/pm.c:pm_unregister_all() Remove the deprecated and no longer used pm_unregister_all(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:09:08 UTC |
| 7e4ef08 | Adrian Bunk | 26 June 2006, 20:26:56 UTC | [PATCH] Driver core: bus.c cleanups This patch contains the following cleanups: - make the needlessly global bus_subsys static - #if 0 the unused find_bus() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:09:08 UTC |
| 42734da | Henrik Kretzschmar | 04 July 2006, 22:53:19 UTC | [PATCH] Driver core: kernel-doc in drivers/base/core.c corrections Corrects the kerneldocs for device_create() and device_destroy() with an eye on coding style, grammar and readability. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:09:08 UTC |
| 7d12e9d | Randy Dunlap | 22 June 2006, 22:14:07 UTC | [PATCH] Driver core: fix driver-core kernel-doc Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'class' Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'devt' Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:626): No description found for parameter 'devt' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:09:08 UTC |
| ffadcc2 | Kristen Carlson Accardi | 12 July 2006, 15:59:00 UTC | [PATCH] PCI: PCIE power management quirk When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:05:48 UTC |
| 6f0312f | Zhang, Yanmin | 12 July 2006, 01:41:47 UTC | [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h Add new defines of PCI-Express AER registers and their bits into file include/linux/pci_regs.h. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:05:48 UTC |
| 709cf5e | Matthew Garrett | 30 June 2006, 09:31:25 UTC | [PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume Some VIA southbridges contain a flag in the ACPI register space that indicates whether an abnormal poweroff has occured, presumably with the intention that it can be cleared on clean shutdown. Some BIOSes check this flag at resume time, and will re-POST the system rather than jump back to the OS if it's set. Clearing it at boot time appears to be sufficient. I'm not sure if drivers/pci/quirks.c is the right place to do it, but I'm not sure where would be cleaner. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg KH <greg@kroah.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:05:48 UTC |
| 6e23389 | Adrian Bunk | 28 June 2006, 16:54:33 UTC | [PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort() This patch adds a proper prototype for pcibios_sort() in arch/i386/pci/pci.h. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:05:48 UTC |
| a969888 | Greg Kroah-Hartman | 12 July 2006, 04:22:58 UTC | [PATCH] USB: move usb-serial.h to include/linux/usb/ USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:25 UTC |
| 166ffcc | Luiz Fernando N. Capitulino | 11 July 2006, 17:19:25 UTC | [PATCH] USB: Anydata: Fixes wrong URB callback. Anydata is using usb_serial_generic_write_bulk_callback() for its read URB, but it should use usb_serial_generic_read_bulk_callback() instead (it's a read URB, isn't it?). Reported by Jon K Hellan <hellan@acm.org>. Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:25 UTC |
| a353678 | David Brownell | 06 July 2006, 22:48:53 UTC | [PATCH] USB: gadget section fixups Recent section changes broke gadget builds on some platforms. This patch is the best fix that's available until better section markings exist: - There's a lot of cleanup code that gets used in both init and exit paths; stop marking it as "__exit". (Best fix for this would be an "__init_or_exit" section marking, putting the cleanup in __init when __exit sections get discarded else in __exit.) - Stop marking the use-once probe routines as "__init" since references to those routines are not allowed from driver structures. They're now marked "__devinit", which in practice is a net lose. (Best fix for this is likely to separate such use-once probe routines from the driver structure ... but in general, all busses that aren't hotpluggable will be forced to waste memory for all probe-only code.) In general these broken section rules waste an average of two to four kBytes per driver of code bloat ... because none of the relevant code can ever be reused after module initialization. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 5501a48 | Phil Dibowitz | 04 July 2006, 19:46:43 UTC | [PATCH] USB: another unusual device Please add the attached device to unusual_devs.h. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| e1979fe | Colin Leroy | 11 July 2006, 09:36:43 UTC | [PATCH] USB: Add one VID/PID to ftdi_sio This patch adds the Testo USB interface to the list of devices recognized by the ftdi_sio module. This device is based on a FT232BL chip, and is used as an interface to get data from digital sensors (thermometer, etc). See http://www.testo.com/ Signed-off-by: Colin Leroy <colin@colino.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 7e3bd12 | Lars Jacob | 10 July 2006, 15:53:58 UTC | [PATCH] USB: unusual_devs entry for Sony DSC-H5 This patch (as749) extends the unusual_devs entry for the Sony DSC-T1 and T5 to cover the H5 as well. From: Lars Jacob <jacob.lars@googlemail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 57b01b1 | Alan Stern | 10 July 2006, 15:51:12 UTC | [PATCH] USB: unusual_devs entry for Nokia E61 This patch (as748) adds an unusual_devs entry for the Nokia E61 mobile phone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| 9a01355 | Alan Stern | 07 July 2006, 17:45:13 UTC | [PATCH] USB: unusual_devs entry for Nokia N91 This patch (as745) adds an unusual_devs entry for the Nokia N91, just like the entry for the N80 added a couple of weeks ago. Apparently Nokia isn't using very good firmware these days... Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| b6c2799 | Dan Streetman | 05 July 2006, 23:17:27 UTC | [PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150 adapter. Here is the relevant /proc/bus/usb/devices output (after adding the vendor/product IDs to the driver): T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0586 ProdID=401a Rev= 1.00 S: Manufacturer=ZyXEL S: Product=Prestige USB Adapter S: SerialNumber=1027 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150 E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=1ms This patch adds the ZyXEL vendor ID to the rtl8150.c driver. The device has absolutely no identifying marks on the outside for model type, just a serial number, and I can't find anything on ZyXEL's website, so I called the product ID PRODUCT_ID_PRESTIGE to match the product string. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: <petkan@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:24 UTC |
| e37de9e | Matthias Urlichs | 06 July 2006, 11:12:53 UTC | [PATCH] USB: Option driver: new product ID Yet another "same name, somewhat different hardware" product. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b857c65 | Navaho Gunleg | 30 June 2006, 07:44:03 UTC | [PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter This patch is to get the WiseGroup.,Ltd SmartJoy Dual Plus PS2-to-USB Adapter [0x6677:0x8802] correctly detected. It sets the NOGET and MULTI_INPUT quirks to make 2 joystick nodes appear in stead of only one. (As of yet, only confirmed working by myself.) Signed-off-by: Navaho Gunleg <navahogunleg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b2f1b0d | Bart Oldeman | 02 July 2006, 03:07:10 UTC | [PATCH] USB: ipw.c driver fix The below patch fixes the ipw module in kernel 2.6.17 for me; without this change it simply does not work at all (all but the first writes are refused because write_urb_busy is always 1). This problem was there in 2.6.15 as well, but at that point I used the (updated) ipw.c, version 0.4, from http://www.neology.co.za/products/opensource/ipwireless/ which no longer compiles with 2.6.17. It can be made to after a few changes but obviously it's easier if the built-in ipw driver works instead of having to download one from the neology site. From: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 49e523b | Michal Piotrowski | 03 July 2006, 12:20:39 UTC | [PATCH] USB: remove devfs information from Kconfig Devfs is gone. We can remove that information. Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 028d2a3 | Christoph Lameter | 30 June 2006, 09:34:47 UTC | [PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c Remove destructor and call kmem_cache_create with NULL for the destructor. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b33488e | Frank Gevaerts | 30 June 2006, 09:34:45 UTC | [PATCH] USB: ipaq.c timing parameters Adds configurable waiting periods to the ipaq connection code. These are not needed when the pocketpc device is running normally when plugged in, but they need extra delays if they are physically connected while rebooting. There are two parameters : * initial_wait : this is the delay before the driver attemts to start the connection. This is needed because the pocktpc device takes much longer to boot if the driver starts sending control packets too soon. * connect_retries : this is the number of times the control urb is retried before finally giving up. The patch also adds a 1 second delay between retries. I'm not sure if the cases where this patch is useful are general enough to include this in the kernel. Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b512504 | Frank Gevaerts | 30 June 2006, 09:34:44 UTC | [PATCH] USB: ipaq.c bugfixes This patch fixes several problems in the ipaq.c driver with connecting and disconnecting pocketpc devices: * The read urb stayed active if the connect failed, causing nullpointer dereferences later on. * If a write failed, the driver continued as if nothing happened. Now it handles that case the same way as other usb serial devices (fix by Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>) Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| b972b68 | David Brownell | 30 June 2006, 09:34:42 UTC | [PATCH] USB: ehci: fix bogus alteration of a local variable In a rare and all-but-unused path, the EHCI driver could reuse a variable in a way that'd make trouble. Specifically, if the first root hub port gets an overcurrent event (rare) during a remote wakeup scenario (all but unused in today's Linux, except for folk working with suspend-to-RAM and similar sleep states), that would look like a fatal error which would shut down the controller. Fix by not reusing that variable. Spotted by Per Hallsmark <saxofon@musiker.nu> Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6661 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 69de51f | Kevin Lloyd | 30 June 2006, 18:17:55 UTC | [PATCH] USB: add driver for non-composite Sierra Wireless devices This patch creates a new driver, sierra.c, that supports the new non-composite Sierra Wireless WWAN devices. The older Sierra Wireless and Airprime devices are supported in airprime.c. Signed-off-by: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| 053be30 | Eric Sesterhenn | 26 June 2006, 22:57:42 UTC | [PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd coverity spotted (id #185) that we still use urb, if the allocation fails in the error path. This patch fixes this by returning directly. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:23 UTC |
| c1b45f2 | Kyle McMartin | 25 June 2006, 22:45:29 UTC | [PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci Move variables only used on !__hppa__ into that #ifndef section. This cleans up a compiler warning on parisc. Problem pointed out by Joel Soete. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 2246540 | Ian Abbott | 26 June 2006, 11:59:17 UTC | [PATCH] USB serial ftdi_sio: Prevent userspace DoS This patch limits the amount of outstanding 'write' data that can be queued up for the ftdi_sio driver, to prevent userspace DoS attacks (or simple accidents) that use up all the system memory by writing lots of data to the serial port. The original patch was by Guillaume Autran, who in turn based it on the same mechanism implemented in the 'visor' driver. I (Ian Abbott) re-targeted the patch to the latest sources, fixed a couple of errors, renamed his new structure members, and updated the implementations of the 'write_room' and 'chars_in_buffer' methods to take account of the number of outstanding 'write' bytes. It seems to work fine, though at low baud rates it is still possible to queue up an amount of data that takes an age to shift (a job for another day!). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 00d6058 | Ian Abbott | 26 June 2006, 10:44:22 UTC | [PATCH] USB serial visor: fix race in open/close The anti user-DoS mechanism in the USB serial 'visor' driver can fail in the following way: visor_open: priv->outstanding_urbs = 0 visor_write: ++priv->outstanding_urbs visor_close: visor_open: priv->outstanding_urbs = 0 visor_write_bulk_callback: --priv->outstanding_urbs So priv->outstanding_urbs ends up as (unsigned long)(-1). Not good! I haven't seen this happen with the visor driver as I don't have the hardware, but I have seen it while testing a patch to implement the same functionality in the ftdi_sio driver (patch not yet submitted). The fix is pretty simple: don't reinitialize outstanding_urbs in visor_open. (Again, I haven't tested the fix in visor, but I have tested it in ftdi_sio.) Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 5650b4d | Phil Dibowitz | 25 June 2006, 00:27:54 UTC | [PATCH] USB Storage: Uname in PR/SC Unneeded message This patch adds the kernel version to the usb-storage Protocol/SubClass unneeded message in order to help us troubleshoot such problems. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 883d989 | Phil Dibowitz | 25 June 2006, 00:27:10 UTC | [PATCH] USB Storage: US_FL_MAX_SECTORS_64 flag This patch adds a US_FL_MAX_SECTORS_64 and removes the Genesys special-cases for this that were in scsiglue.c. It also adds the flag to other devices reported to need it. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 2030794 | Alan Stern | 28 June 2006, 15:20:41 UTC | [PATCH] usbcore: fixes for hub_port_resume This patch (as731) makes a couple of small fixes to the hub_port_resume routine: Don't return status >= 0 when an error occurs; Clear the port-change-suspend status indicator after resuming a device. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| d8840d6 | Ernis | 26 June 2006, 20:02:43 UTC | [PATCH] USB: unusual_devs entry for Samsung MP3 player This patch (as730) contains an unusual_devs entry for a Samsung MP3 device. From: Ernis <ernisv@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| 0ddc063 | Davide Perini | 19 June 2006, 21:07:39 UTC | [PATCH] usb-storage: unusual_devs entry for Motorola RAZR V3x This patch (as725) adds an unusual_devs entry for the Motorola RAZR V3x. From: Davide Perini <perini.davide@dpsoftware.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| b40b7a9 | Alan Stern | 19 June 2006, 19:12:38 UTC | [PATCH] USB hub: don't return status > 0 from resume finish_device_resume() in the hub driver isn't careful always to return a negative code in all the error pathways. It also doesn't return 0 in all the success pathways. This patch (as724) fixes the behavior. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:22 UTC |
| eecd11e | Alan Stern | 19 June 2006, 18:50:15 UTC | [PATCH] usb-storage: fix race between reset and disconnect My recent patch converting usb-storage to use usb_reset_composite_device() added a bug, a race between reset and disconnect. It was necessary to drop the private lock while executing a reset, and if a disconnect occurs at that time it will cause a crash. This patch (as722) fixes the problem by explicitly checking for an early termination after executing each command. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 3dd2ae8 | Oliver Neukum | 23 June 2006, 07:14:17 UTC | [PATCH] USB: update for acm in quirks and debug this adds better debugging output & an update of the quirk list to the acm driver Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 9189bfc | Oliver Bock | 22 June 2006, 17:04:47 UTC | [PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some tiny things This is a new driver for the Cypress CY7C63xxx mirco controller series. It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus GmbH. It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I ported to kernel 2.6 using sysfs. I intend to support more controllers of this family (and more features) as soon as I get hold of the required IDs etc. Please see the source code's header for more information. Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 58a5b0a | Zoran Marceta | 22 June 2006, 17:28:11 UTC | [PATCH] usbfs: use the correct signal number for disconnection usbfs stores the wrong signal number in the siginfo structure used for notifying user programs about device disconnect. This patch (as726) fixes it. From: Zoran Marceta <Zoran.Marceta@micronasnit.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 3b92847 | Matthew Meno | 21 June 2006, 19:25:53 UTC | [PATCH] USB: Support for Susteen Datapilot Universal-2 cable in pl2303 The Susteen Datapilot cable (http://www.susteen.com/productdetail/71/producthl/Notempty) has an internal pl2303 to communicate with a set of dummy connector-ends that connect to a variety of cell phones. I've found that it works right out of the box by simply adding the product/vendor id to the pl2303 driver. Signed-off-by: Matt Meno <mmeno@idealcorp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 5b5daf7 | Inaky Perez-Gonzalez | 20 June 2006, 01:19:01 UTC | [PATCH] USB: Add some basic WUSB definitions This patch adds basic Wireless USB 1.0 definitions to usb_ch9.h that fit into the existing set of declarations. Boils down to two new recipients for requests (ports and remote pipes), rpipe reset and abort request codes and wire adapter and remote pipe descriptor types. Wire adapters are the USB <-> Wireless USB adaptors; remote pipes are used by those adapters to pipe the host <-> endpoint traffic. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| bd97c4f | Pete Zaitcev | 21 June 2006, 22:03:40 UTC | [PATCH] USB: fix visor leaks This patch fixes blatant leaks in visor driver and makes it report mode sensible things in ->write_room (this is only needed if your visor is a terminal though). It is made to fit into 80 columns with a temporary variable. Might even save a few instructions... Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 34f8e76 | Pete Zaitcev | 21 June 2006, 22:00:45 UTC | [PATCH] USB: fix usb-serial leaks, oopses on disconnect This fix addresses two issues: - Unattached port structures were not freed - My initial fix for crash when eventd runs a work in a freed port did not go far enough Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 92164c5 | David Miller | 22 June 2006, 05:26:09 UTC | [PATCH] USB: OHCI hub code unaligned access I noticed this while debugging something unrelated on sparc64. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| c0f8d56 | Christophe Mariac | 23 June 2006, 15:36:21 UTC | [PATCH] USB: new device ids for ftdi_sio driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:21 UTC |
| 4843748 | D. Peter Siddons | 17 June 2006, 22:09:15 UTC | [PATCH] USB: new device id for Thorlabs motor driver Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 3d86149 | Peter Moulder | 19 June 2006, 12:47:49 UTC | [PATCH] USB: Addition of vendor/product id pair for pl2303 driver Text from the back of the box, for your information/amusement: USB DATA CABLE FOR K700 Series The USB Cable is an ideal link between your mobile phone and PC. Employing the user-friendiy [sic] USB standard,its capacity for rapid data transfer enables functions such as synchronization of phone book and calendar,as well as Internet browsing via a modem-enabled phone.Autual [sic] connection speed is dependent on phone capacity. MADE IN CHINA From: Peter Moulder <Peter.Moulder@infotech.monash.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 7fac9a3 | Randy Dunlap | 22 June 2006, 22:12:41 UTC | [PATCH] USB: fix usb kernel-doc Warning(/var/linsrc/linux-2617-g4//include/linux/usb.h:66): No description found for parameter 'ep_dev' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| a5b7474 | Lennert Buytenhek | 23 June 2006, 21:02:01 UTC | [PATCH] USB: ohci bits for the cirrus ep93xx This patch adds OHCI glue bits for the USB host interface in the Cirrus ep93xx (arm920t) CPU. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| d14feb5 | Daniel Mack | 23 June 2006, 20:36:07 UTC | [PATCH] USB: au1200: EHCI and OHCI fixes I received an DBAU1200 eval kit from AMD a few days ago and tried to enable the USB2 port, but the current linux-2.6 GIT did not even compile with CONFIG_SOC_1200, CONFIG_SOC_AU1X00, CONFIG_USB_EHCI and CONFIG_USB_OHCI set. Furthermore, in ehci-hcd.c, platform_driver_register() was called with an improper argument of type 'struct device_driver *' which of course ended up in a kernel oops. How could that ever have worked on your machines? Anyway, here's a trivial patch that makes the USB subsystem working on my board for both OHCI and EHCI. It also removes the /* FIXME use "struct platform_driver" */. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 18577a6 | Domen Puncer | 23 June 2006, 10:55:43 UTC | [PATCH] USB: au1xxx: compile fixes for OHCI for au1200 Compile fixes for au1200 ohci. First part looks a bit hackish... but it works for me. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 23:03:20 UTC |
| 5cab828 | Hans de Goede | 05 July 2006, 16:09:09 UTC | [PATCH] hwmon: Documentation update for abituguru Documentation update for the new bank1_types module param. Also add what we know about different revisions of the uGuru and a note that the abituguru driver unfortunatly does not work with the latest and greatest motherboards, which have what I think is revision 4 of the uGuru. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:08 UTC |
| 9b2ad12 | Hans de Goede | 05 July 2006, 16:07:49 UTC | [PATCH] hwmon: Fix for first generation Abit uGuru chips Now that the abituguru driver is seeing some more widespread testing it has turned out that one the first generation of Abit uGuru motherboards, with uGuru revision 1, the autodetect bank1 sensor type code doesn't (always) work. This patch adds a module param to override the autodetect, and it adds validity checks for the value of the 2 other autodetection override module params. An example of howto use the new param can be found here: http://lm-sensors.org/wiki/Configurations/Abit/AN7 Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 1392707 | Charles Spirakis | 05 July 2006, 16:05:15 UTC | [PATCH] hwmon: New maintainer for w83791d Add Charles Spirakis as the maintainer for the w83791d sensor chip driver. Signed-off-by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 50436a4 | Ben Gardner | 01 July 2006, 15:22:18 UTC | [PATCH] pca9539: Honor the force parameter The pca9539 driver doesn't honor the force parameter; it always does detection. This patch will skip detection if forced. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 5313775 | Uwe Bugla | 01 July 2006, 15:25:08 UTC | [PATCH] i2c-algo-bit: Wipe out dead code i2c-algo-bit: Wipe out dead code Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| b39ad0c | Mark M. Hoffman | 01 July 2006, 15:16:06 UTC | [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers Content-Disposition: inline; filename=i2c-algo-error-handling-fix.patch It is possible for i2c_add_adapter() to fail. Several I2C algorithm drivers ignore that fact. This (compile-tested only) patch fixes them. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 5d925fe | Jean Delvare | 01 July 2006, 15:14:32 UTC | [PATCH] i2c: New mailing list We have a new mailing list dedicated to linux i2c: http://lists.lm-sensors.org/mailman/listinfo/i2c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 5a01748 | Jean Delvare | 01 July 2006, 15:13:37 UTC | [PATCH] i2c-ite: Plan for removal Plan the i2c-ite and i2c-algo-ite drivers for removal. These drivers never compiled since they were added to the kernel tree 5 years ago. Also see: http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| 8ced8ee | Jean Delvare | 01 July 2006, 15:12:53 UTC | [PATCH] i2c-powermac: Fix master_xfer return value Fix the value returned by the i2c-powermac's master_xfer method. It should return the number of messages processed successfully, but instead returns the number of data bytes in the first (and only) processed message. Also explicitly mention the master_xfer convention so that future implementations get it right directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:07 UTC |
| c3efaca | Jean Delvare | 01 July 2006, 15:06:43 UTC | [PATCH] scx200_acb: Fix the block transactions The scx200_acb i2c bus driver pretends to support SMBus block transactions, but in fact it implements the more simple I2C block transactions. Additionally, it lacks sanity checks on the length of the block transactions, which could lead to a buffer overrun. This fixes an oops reported by Alexander Atanasov: http://marc.theaimsgroup.com/?l=linux-kernel&m=114970382125094 Thanks to Ben Gardner for fixing my bugs :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| fd627a0 | Thomas Andrews | 01 July 2006, 15:05:12 UTC | [PATCH] scx200_acb: Fix the state machine Fix the scx200_acb state machine: * Nack was sent one byte too late on reads >= 2 bytes. * Stop bit was set one byte too late on reads. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| 39288e1 | Peter Milne | 01 July 2006, 15:03:20 UTC | [PATCH] i2c-iop3xx: Avoid addressing self Avoid addressing self when sending a slave address. Follows instruction in Intel 80331/80321 manuals. Ignoring this worked previously on 80321, but causes a hang on i2cdetect on 80331. Signed-off-by: Peter Milne <peter.milne@d-tacq.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
| 2369df9 | Mark M. Hoffman | 01 July 2006, 15:01:59 UTC | [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core This patch fixes a bug in the handling of 'ignore' module parameters of I2C client drivers. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 12 July 2006, 22:43:06 UTC |
