https://github.com/torvalds/linux
Revision b1ca4f281c2bc505f0535955eafc9730bc7ee851 authored by Olliver Schinagl on 05 April 2018, 09:25:48 UTC, committed by Olliver Schinagl on 05 April 2018, 09:25:48 UTC
* for-opinicus/asoc: ASoC: sun4i-is: also check for NULL on reset pin request * for-opinicus/gpio: gpio: pca953x: add support for the NXP pca9570 * for-opinicus/input: input: edt-ft5x06: force touchscreen to remain active input: edt-ft5x06: add polldev as an option input: edt-ft5x06: take into account the number of fingers input: edt-ft5x06: fix multi-touch handling input: edt-ft5x06: sanity check on input input: edt-ft5x06: silence deferral error input: edt-ft5x06: use less magic and more defines input: edt-ft5x06: shorten defines input: edt-ft5x06: minor consistency cleanup/line length reduction input: edt-ft5x06: fix some whitespace/ident issues input: edt-ft5x06: only enable the irq when needed input: edt-ft5x06: cleanup headers input: edt-ft5x06: add support for the ft5426 controller input: edt-ft5x06: group r, w and rw functions input: of_touchscreen: add support for minimum sizes input: of_touchscreen: rename touchscreen-size-[xy] input: of_touchscreen: shorten variable names * for-opinicus/leds: leds: pca963x: set DMBLNK as default during probe leds: pca963x: remove whitespace and checkpatch problems leds: pca963x: refactor initial led output a little leds: pca963x: save mode when setting power_state leds: pca963x: add defines and remove some magic values leds: pca963x: alphabetize headers leds: pca963x: abort probe if device is not connected * for-opinicus/pwm: pwm: core: do not block apply->state on period * for-opinicus/rtc: rtc: sun6i: add missing header * for-opinicus/regulator: power: supply: axp288: use the BIT() macro power: supply: axp20x: add missing include bitops.h mfd: axp20x: use explicit bit defines mfd: axp20x: fixup includes regulator: dts: set proper lradc vref on OLinuXino Lime2 regulator: dts: add full voltage range to LDO4 on the Lime2 regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2 regulator: axp20x: add software based soft_start for LDO3 regulator: axp20x: add support for set_ramp_delay regulator: core: enable power when setting up constraints regulator: axp20x: name voltage ramping define properly regulator: axp20x: use defines for masks * for-opinicus/serial: serial: 8250: expand debug ability of the irq handler serial: 8250: Only confirm handled interrupts on supported ones serial: 8250_dw: Make register access consistent serial: 8250_dw: Use serial port assessor wrapper serial: 8250: Do not treat the IIR register as a bitfield serial: 8250: Minor cleanups serial: 8250: Replace asm/irq with linux/irqreturn, linux/interrupt * for-opinicus/fbdev: (21 commits) fbdev: ssd1307fb: Do not always clear the display on boot fbdev: ssd1307fb: Limit to support 0 - 180 rotation only fbdev: ssd1307fb: Add hardware accelerated rotation support fbdev: ssd1307fb: Ensure display is toggled properly fbdev: ssd1307fb: Ensure set_par can do bring-up fbdev: ssd1307fb: Remove unused forward declaration fbdev: ssd1307fb: Reduce magic values with defines fbdev: ssd1307fb: Use resolution instead of dimensions fbdev: ssd1307fb: cleanup: Group fb_info.fix fbdev: ssd1307fb: Use ratelimited error printing fbdev: ssd1307fb: Make output a little more consistent fbdev: ssd1307fb: Rename i2c device ids fbdev: ssd1307fb: Abort probe if we cannot talk to the display fbdev: sysfs: Add rotation in degrees support to validation fbdev: sysfs: Expand input validation to degree's fbdev: sysfs: Input validation fbdev: sysfs: Replace simple_strtoul with kstrtoul fbdev: sysfs: Sort headers fbdev: of: Add parameter to not clear screen on probe fbdev: of: Add of parsing helper ... * for-opinicus/hdmi: arm/dts: Use hdmi_i2c node on the OLinuXino Lime2 [WIP-do-not-merge] drm/sunxi: Split off hdmi-i2c as a separated driver drm: sun4i: check for i2c busy status drm/sun4i: make fifo_transfer more verbose in case of error drm/sun4i: i2c: consolidate ddc items drm/sun4i: make bool assignment explicit drm/sun4i: enable/disable the tmds clock on use drm/sun4i: Fix NULL pointer dereference at unbind drm/sun4i: improve header readability drm/sun4i: Fix Kconfig indenting drm/edid: Prevent NULL pointer deref when there is no I2C adapter
11 parent s 489fbb3 + 07e7717 + 1cd397f + d619e9d + 3a31f9a + 5fc70f8 + a3d9801 + 47b3c8f + 4fdf765 + 83e7d98 + 6e4973b
Tip revision: b1ca4f281c2bc505f0535955eafc9730bc7ee851 authored by Olliver Schinagl on 05 April 2018, 09:25:48 UTC
Merge branches 'for-opinicus/asoc', 'for-opinicus/gpio', 'for-opinicus/input', 'for-opinicus/leds', 'for-opinicus/pwm', 'for-opinicus/rtc', 'for-opinicus/regulator', 'for-opinicus/serial', 'for-opinicus/fbdev' and 'for-opinicus/hdmi' into opinicus-4.14-0
Merge branches 'for-opinicus/asoc', 'for-opinicus/gpio', 'for-opinicus/input', 'for-opinicus/leds', 'for-opinicus/pwm', 'for-opinicus/rtc', 'for-opinicus/regulator', 'for-opinicus/serial', 'for-opinicus/fbdev' and 'for-opinicus/hdmi' into opinicus-4.14-0
Tip revision: b1ca4f2
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
certs | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.cocciconfig | -rw-r--r-- | 59 bytes |
.get_maintainer.ignore | -rw-r--r-- | 31 bytes |
.gitattributes | -rw-r--r-- | 30 bytes |
.gitignore | -rw-r--r-- | 1.4 KB |
.mailmap | -rw-r--r-- | 8.7 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 96.2 KB |
Kbuild | -rw-r--r-- | 2.2 KB |
Kconfig | -rw-r--r-- | 287 bytes |
MAINTAINERS | -rw-r--r-- | 420.2 KB |
Makefile | -rw-r--r-- | 59.3 KB |
README | -rw-r--r-- | 722 bytes |
Computing file changes ...