| b331439 | Takashi Iwai | 14 April 2010, 12:33:57 UTC | ALSA: hda - Fix control element allocations in VIA codec parser The commit 5b0cb1d850c26893b1468b3a519433a1b7a176be ALSA: hda - add more NID->Control mapping breaks the control element allocation by returning a wrong value. Let's fix it. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 April 2010, 12:35:11 UTC |
| ff818c2 | Takashi Iwai | 12 April 2010, 06:59:25 UTC | ALSA: hda - Add fix-up for Sony VAIO with ALC269 Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 April 2010, 06:59:25 UTC |
| 7fa90e8 | Takashi Iwai | 12 April 2010, 06:49:00 UTC | ALSA: hda - Enhance fix-up table for Realtek codecs A few enhancement / fixes for fix-up table of some Realtek codecs: - Apply fix-ups only for the auto model - Apply additional verbs after normal init verbs - Add a debug print to show the fix-up application This is basically a preliminary work for the next fix for Sony VAIO. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 12 April 2010, 06:58:48 UTC |
| 7f311a4 | Takashi Iwai | 09 April 2010, 15:32:23 UTC | ALSA: hda - Fix initial capture source connections of ALC880/260 The widget connections of ADC of ALC880 and ALC2260 aren't initialized, thus it might point to invalid pin. This can be a problem when mode=auto and there is only one input pin. Then user can't change the connection at all. This patch adds the code to initialize the input pin connection of these codecs. Reference: Novell bnc#594363 https://bugzilla.novell.com/show_bug.cgi?id=594363 Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 April 2010, 15:35:42 UTC |
| 226b1ec | Kailang Yang | 09 April 2010, 09:01:20 UTC | ALSA: hda - Fix setup for ALC269vb amic and dmic models Corrected HP and mic pins for ALC269vb amic and dmic models. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 April 2010, 09:01:20 UTC |
| 531d879 | Kailang Yang | 09 April 2010, 08:57:33 UTC | ALSA: hda - Fix auto-parser of ALC269vb for HP pin NID 0x21 ALC269vb has an alternative HP pin 0x21 in addition. Fix the parser to recognize it. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 09 April 2010, 08:57:33 UTC |
| 7ad7b21 | Maurus Cuelenaere | 06 April 2010, 16:12:52 UTC | ALSA: hda: Add support for Medion WIM2160 This adds support for the Medion WIM2160 soundcard. There's no PCI quirk added because it has the same PCI id as the Medion MD2. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 07 April 2010, 12:56:55 UTC |
| f9700d5 | Takashi Iwai | 05 April 2010, 21:25:13 UTC | ALSA: hda - Fix a wrong array range check in patch_realtek.c The commit 6a4f2ccb467e00281470cde2dee08fe5ecde62d1 introduced a wrong comparision for the array range check, which effectively skips the whole initialization of DAC connections. Fixed now. Reference: bko#15689 https://bugzilla.kernel.org/show_bug.cgi?id=15689 Reported-by: Adrian Ulrich <kernel@blinkenlights.ch> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 April 2010, 21:36:16 UTC |
| d128418 | Tony Vroon | 05 April 2010, 15:30:43 UTC | ALSA: hda - Enable amplifiers on Acer Inspire 6530G After more tests it appears that EAPD needs to be enabled on both the 0x14 and 0x15 NIDs to enable the main speaker and headphone amplifiers. The maximum volume setting is now equal to what the machine achieves under other operating systems. Disabling Front or LFE playback triggers EAPD and disables the amplifier. As such, these two playback switches have been removed from the mixer. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 05 April 2010, 16:29:48 UTC |
| 3815595 | Takashi Iwai | 04 April 2010, 10:14:03 UTC | ALSA: hda - Add MSI blacklist for Aopen MZ915-M The device needs MSI disablement. Added to the quirk list. Reported-by: Harald Dunkel <harri@afaics.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 04 April 2010, 10:14:03 UTC |
| 91cb173 | Takashi Iwai | 01 April 2010, 16:08:29 UTC | ALSA: hda - Update document about MSI and interrupts Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 April 2010, 16:08:29 UTC |
| b8e80cf | Daniel T Chen | 30 March 2010, 17:29:28 UTC | ALSA: hda: Fix 0 dB offset for Lenovo Thinkpad models using AD1981 BugLink: https://launchpad.net/bugs/551606 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_ad1981() for all models using the Thinkpad quirk. Reported-by: Jane Silber Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 31 March 2010, 09:47:14 UTC |
| 1f85d72 | Takashi Iwai | 30 March 2010, 05:48:05 UTC | ALSA: hda - Add missing printk argument in previous patch Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 March 2010, 05:48:05 UTC |
| 6694635 | Takashi Iwai | 29 March 2010, 15:21:45 UTC | ALSA: hda - Fix ADC/MUX assignment of ALC269 codec ALC269 codec has a few different variants, and each of them may have different ADC and MUX widgets. For example, one model has ADC 0x08 with MUX 0x23 while others has ADC 0x09 or ADC 0x07 with MUX 022 or 0x24. The difference of ADC appears usually as the capability of the digital mic pin (0x12), and the current driver sometimes misses the internal mic pin due to the mismatching ADC. This patch adds a bit more clever way to find the matching ADC instead of the static list. Now the driver checks all active input pins and fills only the ADC/MUX's that contain all of them. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 March 2010, 15:27:31 UTC |
| 5dbd5ec | Takashi Iwai | 29 March 2010, 07:16:24 UTC | ALSA: hda - Fix invalid bit values passed to snd_hda_codec_amp_stereo() The mask and value parameters passed to snd_hda_codec_amp_stereo() should be 8-bit values for mute and volume. Passing AMP_IN_MUTE() is wrong, which is found in many places in patch_realtek.c as a left-over from the conversion to snd_hda_codec_amp_stereo(). Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 March 2010, 07:18:49 UTC |
| 9ec8dda | Daniel T Chen | 28 March 2010, 06:34:40 UTC | ALSA: hda: Use LPIB for ga-ma770-ud3 board BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=575669 The OR states that position_fix=1 is necessary to work around glitching during volume adjustments using PulseAudio. Reported-by: Carlos Laviola <claviola@debian.org> Tested-by: Carlos Laviola <claviola@debian.org> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 March 2010, 06:26:05 UTC |
| 6a4f2cc | Takashi Iwai | 25 March 2010, 14:00:15 UTC | ALSA: hda - Don't set invalid connection index in Realtek initialiaiton Skip initialization of connections of DAC widgets that aren't used, which resulted in invalid verb parameters. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 25 March 2010, 14:00:15 UTC |
| bae84e7 | Takashi Iwai | 22 March 2010, 07:30:20 UTC | ALSA: hda - Fix access-after-free in patch_realtek.c alc_free_kctls() has to be called after all jobs done in alc_build_controls(). Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 March 2010, 07:30:20 UTC |
| ea823c0 | Takashi Iwai | 22 March 2010, 07:07:55 UTC | ALSA: hda - Sort codec entry list of Nvidia HDMI Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 March 2010, 07:07:55 UTC |
| e933e9e | Derek Kelly | 22 March 2010, 07:04:19 UTC | ALSA: hda - Add support of Nvidia GT220 HDMI This patch adds the device id for Nvidia GT220 cards to the nvhdmi driver. I have tested it and confirmed it to be working. Original patch download link: https://gist.github.com/324070/ Signed-off-by: Derek Kelly <user.vdr@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 March 2010, 07:06:23 UTC |
| 025f206 | Daniel T Chen | 21 March 2010, 22:34:43 UTC | ALSA: hda: Fix 0 dB offset for HP laptops using CX20551 (Waikiki) BugLink: https://launchpad.net/bugs/420578 The OR has verified that his hardware distorts because of the 0 dB offset not corresponding to the highest PCM level. Fix this by capping said PCM level to 0 dB similarly to what we do for CX20549 (Venice). Reported-by: Mike Pontillo <pontillo@gmail.com> Tested-by: Mike Pontillo <pontillo@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 22 March 2010, 07:01:41 UTC |
| e3d2530 | Kunal Gangakhedkar | 20 March 2010, 17:38:01 UTC | ALSA: hda - Add PCI quirk for HP dv6-1110ax. Adding this PCI quirk fixes the board config detection. This also fixes jack sensing by using "hp_detect=1" via properly detected board config. Signed-off-by: Kunal Gangakhedkar <kunal.gangakhedkar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 21 March 2010, 08:33:11 UTC |
| 220bf99 | Linus Torvalds | 20 March 2010, 01:17:57 UTC | Linux 2.6.34-rc2 | 20 March 2010, 01:17:57 UTC |
| e4d8063 | Linus Torvalds | 20 March 2010, 01:16:20 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers. | 20 March 2010, 01:16:20 UTC |
| b50df7d | Linus Torvalds | 20 March 2010, 01:14:22 UTC | Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros | 20 March 2010, 01:14:22 UTC |
| 352d465 | Linus Torvalds | 19 March 2010, 20:49:29 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit | 19 March 2010, 20:49:29 UTC |
| 95c46af | Linus Torvalds | 19 March 2010, 20:42:43 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32 | 19 March 2010, 20:42:43 UTC |
| cf3966b | Linus Torvalds | 19 March 2010, 20:42:00 UTC | Merge branch 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c | 19 March 2010, 20:42:00 UTC |
| 8dba8f9 | Linus Torvalds | 19 March 2010, 20:40:03 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call" | 19 March 2010, 20:40:03 UTC |
| 2eb645e | Linus Torvalds | 19 March 2010, 20:39:42 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver | 19 March 2010, 20:39:42 UTC |
| 8fdb7e9 | Linus Torvalds | 19 March 2010, 20:39:21 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ... | 19 March 2010, 20:39:21 UTC |
| 17cf444 | Jeff Garzik | 19 March 2010, 18:25:45 UTC | Delete zero-length file drivers/mtd/maps/omap_nor.c The content was deleted in cc87edb173effdf74e680ee6d622a935ff0c1d6f, but the file remained as a zero-length file. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 19 March 2010, 18:25:45 UTC |
| fc7f99c | Linus Torvalds | 19 March 2010, 16:43:06 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits) ceph: update for write_inode API change ceph: reset osd after relevant messages timed out ceph: fix flush_dirty_caps race with caps migration ceph: include migrating caps in issued set ceph: fix osdmap decoding when pools include (removed) snaps ceph: return EBADF if waiting for caps on closed file ceph: set osd request message front length correctly ceph: reset front len on return to msgpool; BUG on mismatched front iov ceph: fix snaptrace decoding on cap migration between mds ceph: use single osd op reply msg ceph: reset bits on connection close ceph: remove bogus mds forward warning ceph: remove fragile __map_osds optimization ceph: fix connection fault STANDBY check ceph: invalidate_authorizer without con->mutex held ceph: don't clobber write return value when using O_SYNC ceph: fix client_request_forward decoding ceph: drop messages on unregistered mds sessions; cleanup ceph: fix comments, locking in destroy_inode ceph: move dereference after NULL test ... Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt | 19 March 2010, 16:43:06 UTC |
| 0a492fd | Linus Torvalds | 19 March 2010, 16:36:18 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial white space [CIFS] checkpatch cleanup cifs: add cifs_revalidate_file cifs: add a CIFSSMBUnixQFileInfo function cifs: add a CIFSSMBQFileInfo function cifs: overhaul cifs_revalidate and rename to cifs_revalidate_dentry | 19 March 2010, 16:36:18 UTC |
| 4cb80cd | Peter Korsgaard | 12 March 2010, 11:33:15 UTC | USB: gadget/multi: cdc_do_config: remove redundant check cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:24 UTC |
| d835933 | Yoshihiro Shimoda | 16 March 2010, 03:29:35 UTC | usb: r8a66597-hcd: fix removed from an attached hub fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:24 UTC |
| 9ce669a | Sarah Sharp | 16 March 2010, 19:59:24 UTC | USB: xhci: Make endpoint interval debugging clearer. The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:24 UTC |
| f09a15e | Matthew Wilcox | 16 March 2010, 19:55:44 UTC | USB: Fix usb_fill_int_urb for SuperSpeed devices USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:23 UTC |
| e549a17 | Michael Brunner | 10 March 2010, 22:26:37 UTC | USB: cp210x: Remove double usb_control_msg from cp210x_set_config This patch removes a double usb_control_msg that sets the cp210x configuration registers a second time when calling cp210x_set_config. For data sizes >2 the second write gets corrupted. The patch has been created against 2.6.34-rc1, but all cp210x driver revisions are affected. Signed-off-by: Michael Brunner <mibru@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:23 UTC |
| 7f56cfd | Christoph Egger | 10 March 2010, 11:33:11 UTC | USB: Remove last bit of CONFIG_USB_BERRY_CHARGE One last bit was missed while removing the USB_BERRY_CHARGE config option in a8d4211f33a9573f7b1bdcfd9c9c48631d1515ee which gets dropped by this patch. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:22 UTC |
| 83ba11d | Maurus Cuelenaere | 08 March 2010, 17:20:59 UTC | USB: gadget: add gadget controller number for s3c-hsotg driver This prevents some drivers from complaining that no bcdDevice id was set. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:22 UTC |
| 9c67d28 | Alessio Igor Bogani | 13 March 2010, 17:35:14 UTC | USB: ftdi_sio: Fix locking for change_speed() function The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:21 UTC |
| 11b10d9 | Michal Nazarewicz | 15 March 2010, 10:10:23 UTC | USB: g_mass_storage: fixed module name in Kconfig The Kconfig help message for Mass Storage Gadget claimed the module will be named "g_file_storage" whereas it should be "g_mass_storage". Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:21 UTC |
| f479d70 | Peter Korsgaard | 12 March 2010, 14:55:28 UTC | USB: gadget: f_mass_storage::fsg_bind(): fix error handling Contrary to the comment in fsg_add, fsg_bind calls fsg_unbind on errors, which decreases refcount and frees the fsg_dev structure, causing trouble when fsg_add does the same. Fix it by simply leaving up cleanup to fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:20 UTC |
| f88f669 | Mike Frysinger | 07 March 2010, 15:36:27 UTC | USB: g_mass_storage: fix section mismatch warnings The recent commit (0e530b45783f75) that moved usb_ep_autoconfig from the __devinit section to the __init section missed the mass storage device. Its fsg_bind() function uses the usb_ep_autoconfig() function from non __init context leading to: WARNING: drivers/usb/gadget/g_mass_storage.o(.text): Section mismatch in reference from the function _fsg_bind() to the function .init.text:_usb_ep_autoconfig() So move fsg_bind() into __init as well. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:19 UTC |
| f2984a3 | Mike Frysinger | 09 March 2010, 05:35:22 UTC | USB: gadget: fix Blackfin builds after gadget cleansing The recent change to clean out dead gadget drivers (90f7976880bbbf99) missed the call to gadget_is_musbhsfc() behind CONFIG_BLACKFIN. This causes Blackfin gadget builds to fail since the function no longer exists anywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:19 UTC |
| 872f8b4 | Dan Carpenter | 06 March 2010, 11:08:56 UTC | USB: goku_udc: remove potential null dereference "dev" is always null here. In the end it's only used to get the pci_name() of "pdev" which is redundant information and so I removed it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:19 UTC |
| 33c3875 | spark | 05 March 2010, 06:18:05 UTC | USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff Signed-off-by: spark <spark@bandrich.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:18 UTC |
| 510607d | Stefan Schmidt | 03 March 2010, 18:37:12 UTC | USB: serial: Fix module name typo for qcaux Kconfig entry. The module is called qcaux and not moto_modem. Also use help instead of ---help-- to be in sync with the other Kconfig entries. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:18 UTC |
| 338124c | Oliver Neukum | 27 February 2010, 19:57:12 UTC | usb: cdc-wdm: Fix deadlock between write and resume The new runtime PM scheme allows resume() to have no locks. This fixes the deadlock. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:17 UTC |
| d93d16e | Oliver Neukum | 27 February 2010, 19:56:47 UTC | usb: cdc-wdm: Fix order in disconnect and fix locking - as the callback can schedule work, URBs must be killed first - if the driver causes an autoresume, the caller must handle locking Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:17 UTC |
| 62e6685 | Oliver Neukum | 27 February 2010, 19:56:22 UTC | usb: cdc-wdm:Fix loss of data due to autosuspend The guarding flag must be set and tested under spinlock and cleared before the URBs are resubmitted in resume. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:16 UTC |
| beb1d35 | Oliver Neukum | 27 February 2010, 19:55:52 UTC | usb: cdc-wdm: Fix submission of URB after suspension There's a window under which cdc-wdm may submit an URB to a device about to be suspended. This introduces a flag to prevent it. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:16 UTC |
| d855fe2 | Oliver Neukum | 27 February 2010, 19:55:26 UTC | usb: cdc-wdm: Fix race between disconnect and debug messages dev_dbg() and dev_err() cannot be used to report failures that may have been caused by a device's removal Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:15 UTC |
| 922a5ea | Oliver Neukum | 27 February 2010, 19:54:59 UTC | usb: cdc-wdm: Fix race between autosuspend and reading from the device While an available response is read the device must not be autosuspended. This requires a flag dedicated to that purpose. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:15 UTC |
| 860e41a | Oliver Neukum | 27 February 2010, 19:54:24 UTC | usb: cdc-wdm: Fix race between write and disconnect Unify mutexes to fix a race between write and disconnect and shift the test for disconnection to always report it. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:14 UTC |
| aa47145 | Felipe Balbi | 12 March 2010, 08:27:24 UTC | usb: musb: core: declare mbase only where it's used ... and avoid a compilation if we disable host side of musb. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:14 UTC |
| 7f4bca4 | Mike Frysinger | 12 March 2010, 08:27:23 UTC | USB: musb: fix warnings in Blackfin regs The recent commit "usb: musb: Add context save and restore support" added some stubs for the Blackfin code so things would compile, but it also added a bunch of warnings due to missing return statements. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:13 UTC |
| adb3ee4 | Mike Frysinger | 12 March 2010, 08:27:21 UTC | usb: musb: abstract out ULPI_BUSCONTROL register reads/writes The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY. However, it has no ULPI support - so there are no registers at all. That means accesses to ULPI_BUSCONTROL have to be abstracted away like other MUSB registers. This fixes building for Blackfin parts again. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:13 UTC |
| 9957dd9 | Tony Lindgren | 12 March 2010, 08:35:20 UTC | usb: musb: Fix compile error for omaps for musb_hdrc CONFIG_ARCH_OMAP34XX is now CONFIG_ARCH_OMAP3. But since drivers/usb/musb/omap2430.c use CONFIG_PM for these registers and functions, do the same for the header. Otherwise we get the following for most omap3 defconfigs: drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:261: error: expected identifier or '(' before 'while' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'do' drivers/usb/musb/omap2430.c:268: error: expected identifier or '(' before 'while' Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:12 UTC |
| fa7bf34 | Grant Likely | 11 March 2010, 22:06:54 UTC | usb/gadget: fix compile error on r8a66597-udc.c C file uses IS_ERR and PTR_ERR, but doesn't include <linux/err.h> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:12 UTC |
| 1e63ef0 | Oliver Neukum | 12 March 2010, 10:27:21 UTC | USB: Fix documentation for avoid_reset_quirk The name used in the documentation doesn't match reality. Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:11 UTC |
| 3b04872 | Nathaniel McCallum | 11 March 2010, 18:09:26 UTC | USB: option: add support for a new CMOTECH device to usb/serial/option Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:11 UTC |
| bb73ed2 | Nathaniel McCallum | 11 March 2010, 18:01:17 UTC | USB: option: move hardcoded PID to a macro in usb/serial/option Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:10 UTC |
| eaff4cd | Nathaniel McCallum | 11 March 2010, 18:09:24 UTC | USB: option: fix incorrect manufacturer name in usb/serial/option: MAXON->CMOTECH Signed-off-by: Nathaniel McCallum <nathaniel@natemccallum.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:10 UTC |
| dee5658 | Daniel Sangorrin | 11 March 2010, 22:10:58 UTC | USB: serial: ftdi: add CONTEC vendor and product id This is a patch to ftdi_sio_ids.h and ftdi_sio.c that adds identifiers for CONTEC USB serial converter. I tested it with the device COM-1(USB)H [akpm@linux-foundation.org: keep the VIDs sorted a bit] Signed-off-by: Daniel Sangorrin <daniel.sangorrin@gmail.com> Cc: Andreas Mohr <andi@lisas.de> Cc: Radek Liboska <liboska@uochb.cas.cz> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:09 UTC |
| 1d68064 | Andiry Xu | 12 March 2010, 09:10:04 UTC | USB: xHCI: re-initialize cmd_completion When a signal interrupts a Configure Endpoint command, the cmd_completion used in xhci_configure_endpoint() is not re-initialized and the wait_for_completion_interruptible_timeout() will return failure. Initialize cmd_completion in xhci_configure_endpoint(). Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:09 UTC |
| bc75fa3 | Alex Chiang | 16 March 2010, 20:48:45 UTC | USB: xhci: rename driver to xhci_hcd Naming consistency with other USB HCDs. Signed-off-by: Alex Chiang <achiang@hp.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:08 UTC |
| ae92697 | Sonic Zhang | 08 March 2010, 16:26:01 UTC | USB: musb: fix build error introduced by isoc change The recent commit "usb: musb: Fix for isochronous IN transfer" (f82a689fa) seems to have been against an older kernel version. It uses the old style naming of variables. Unfortunately, this breaks building for most MUSB users out there since "bDesiredMode" has been renamed to "desired_mode". Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:08 UTC |
| 0725e95 | Bernhard Rosenkraenzer | 10 March 2010, 11:36:43 UTC | USB: qcserial: add new device ids This patch adds various USB device IDs for Gobi 2000 devices, as found in the drivers available at https://www.codeaurora.org/wiki/GOBI_Releases Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:07 UTC |
| f073092 | Oliver Neukum | 02 March 2010, 23:37:56 UTC | USB: cdc-acm: Fix stupid NULL pointer in resume() Stupid logic bug passing a just nulled pointer Signed-off-by: Oliver Neukum <neukum@b1-systems.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:06 UTC |
| 1082f57 | Clemens Ladisch | 01 March 2010, 16:18:56 UTC | USB: EHCI: adjust ehci_iso_stream for changes in ehci_qh The EHCI driver stores in usb_host_endpoint.hcpriv a pointer to either an ehci_qh or an ehci_iso_stream structure, and uses the contents of the hw_info1 field to distinguish the two cases. After ehci_qh was split into hw and sw parts, ehci_iso_stream must also be adjusted so that it again looks like an ehci_qh structure. This fixes a NULL pointer access in ehci_endpoint_disable() when it tries to access qh->hw->hw_info1. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:06 UTC |
| 92bc364 | Clemens Ladisch | 01 March 2010, 08:12:50 UTC | USB: EHCI: fix ITD list order When isochronous URBs are shorter than one frame and when more than one ITD in a frame has been completed before the interrupt can be handled, scan_periodic() completes the URBs in the order in which they are found in the descriptor list. Therefore, the descriptor list must contain the ITDs in the correct order, i.e., a new ITD must be linked in after any previous ITDs of the same endpoint. This should fix garbled capture data in the USB audio drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: Colin Fletcher <colin.m.fletcher@googlemail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:05 UTC |
| bf16201 | Huang Ying | 28 February 2010, 05:51:29 UTC | USB: Option: Add support for a variant of DLink DWM 652 U5 I found a DLink DWM 652 U5 USB 3G modem has product ID 0xce1e instead of orignal 0xce16. The new ID is added. And I found there are two entries for 0xce16, one has raw number, the other has symbol DLINK_PRODUCT_DWM_652_U5. This is fixed too. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:04 UTC |
| cd0e8aa | Ondrej Zary | 27 February 2010, 21:56:28 UTC | USB: unusual_devs.h: Fix capacity for SL11R-IDE 2.6c SL11R-IDE 2.6c (at least) reports wrong capacity (one sector more). Reading that last sector causes the device not to work anymore (and looks like HAL or something does that automatically after plugging in): sd 5:0:0:0: [sdc] Device not ready sd 5:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08 sd 5:0:0:0: [sdc] Sense Key : 0x2 [current] sd 5:0:0:0: [sdc] ASC=0x0 ASCQ=0x0 sd 5:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 04 a8 b5 70 00 00 01 00 Add unusual_devs entry to fix the capacity. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:04 UTC |
| eb8878a | Johan Hovold | 27 February 2010, 15:24:49 UTC | USB: serial: use port endpoint size to determine if ep is available It is possible to have a multi-port device with a port lacking an in or out bulk endpoint. Only checking for num_bulk_in or num_bulk_out is thus not sufficient to determine whether a specific port has an in or out bulk endpoint. This fixes potential null pointer dereferences in the generic open and write routines, as well as access to uninitialised fifo in write_room and chars_in_buffer. Also let write fail with ENODEV (instead of 0) on missing out endpoint (also on zero-length writes). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:03 UTC |
| 6313620 | Johan Hovold | 27 February 2010, 13:06:07 UTC | USB: serial: fix softint not being called on errors Make sure usb_serial_port_softint is called on errors also when using multi urb writes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:03 UTC |
| 0ae1474 | Johan Hovold | 27 February 2010, 13:05:46 UTC | USB: serial: fix error message on close in generic driver Resubmitting read urb fails with -EPERM if completion handler runs while urb is being killed on close. This should not be reported as an error. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:02 UTC |
| 7152b59 | Alan Stern | 06 March 2010, 20:04:03 UTC | USB: fix usbfs regression This patch (as1352) fixes a bug in the way isochronous input data is returned to userspace for usbfs transfers. The entire buffer must be copied, not just the first actual_length bytes, because the individual packets will be discontiguous if any of them are short. Reported-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:24:02 UTC |
| 336cee4 | Jason Wessel | 09 March 2010, 03:50:11 UTC | tty_port,usb-console: Fix usb serial console open/close regression Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox <alan@linux.intel.com> CC: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oliver@neukum.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:57 UTC |
| 2314436 | Tobias Klauser | 11 March 2010, 22:08:18 UTC | tty: cpm_uart: use resource_size() Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:56 UTC |
| d4bee0a | Fang Wenqi | 09 March 2010, 10:54:28 UTC | tty_buffer: Fix distinct type warning CC drivers/char/tty_buffer.o drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’: drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’: drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and tty_insert_flip_string_fixed_flag(). Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:55 UTC |
| e74d098 | Amit Shah | 12 March 2010, 06:23:15 UTC | hvc_console: Fix race between hvc_close and hvc_remove Alan pointed out a race in the code where hvc_remove is invoked. The recent virtio_console work is the first user of hvc_remove(). Alan describes it thus: The hvc_console assumes that a close and remove call can't occur at the same time. In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous itself.... So this can happen hvc_close hvc_remove hung up ? - no lock tty = hp->tty unlock lock hp->tty = NULL unlock notify del kref_put the hvc struct close completes tty is destroyed tty_hangup dead tty tty->ops will be NULL NULL->... This patch adds some tty krefs and also converts to using tty_vhangup(). Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linuxppc-dev@ozlabs.org CC: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:54 UTC |
| f157b58 | David Miller | 03 March 2010, 10:50:26 UTC | uartlite: Fix build on sparc. We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:54 UTC |
| 352fa6a | Mel Gorman | 02 March 2010, 22:24:19 UTC | tty: Take a 256 byte padding into account when buffering below sub-page units The TTY layer takes some care to ensure that only sub-page allocations are made with interrupts disabled. It does this by setting a goal of "TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the size of tty_buffer into account, it fails to account that tty_buffer_find() rounds the buffer size out to the next 256 byte boundary before adding on the size of the tty_buffer. This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the size of the tty_buffer and the padding. Once applied, tty_buffer_alloc() should not require high-order allocations. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:53 UTC |
| 87a6aca | Greg Kroah-Hartman | 16 March 2010, 00:14:15 UTC | Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call" This reverts commit eec9fe7d1ab4a0dfac4cb43047a7657fffd0002f. Ari writes as the reason this should be reverted: The problems with this patch include: 1. There's at least one subtlety I overlooked - switching between X servers (i.e. from one X VT to another) still requires the cooperation of both X servers. I was assuming that KMS eliminated this. 2. It hasn't been tested at all (no X server patch exists which uses the new mode). As he was the original author of the patch, I'll revert it. Cc: Ari Entlich <atrigent@ccs.neu.edu> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:17:52 UTC |
| 12ee3c0 | David Rientjes | 10 March 2010, 22:50:21 UTC | driver core: numa: fix BUILD_BUG_ON for node_read_distance node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when the number of nodes printed will exceed the buffer length. Each node only needs four chars: three for distance (maximum distance is 255) and one for a seperating space or a trailing newline. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:22 UTC |
| f0eae0e | Jani Nikula | 11 March 2010, 16:11:45 UTC | driver-core: document ERR_PTR() return values A number of functions in the driver core return ERR_PTR() values on error. Document this in the kernel-doc of the functions. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:21 UTC |
| 178a5b3 | Robert P. J. Day | 12 March 2010, 12:30:35 UTC | kobject: documentation: Update to refer to kset-example.c. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:20 UTC |
| 67fc233 | Stephen Rothwell | 15 March 2010, 23:33:32 UTC | sysdev: the cpu probe/release attributes should be sysdev_class_attributes This fixes these warnings: drivers/base/cpu.c:264: warning: initialization from incompatible pointer type drivers/base/cpu.c:265: warning: initialization from incompatible pointer type Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:19 UTC |
| 462bd29 | Robert P. J. Day | 11 March 2010, 12:59:09 UTC | kobject: documentation: Fix erroneous example in kobject doc. Replace uio_mem example for kobjects with uio_map, since the uio_mem struct no longer contains a kobject. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:18 UTC |
| e59817b | Randy Dunlap | 10 March 2010, 19:47:58 UTC | driver-core: fix missing kernel-doc in firmware_class Fix kernel-doc warning in firmware_class.c: Warning(drivers/base/firmware_class.c:94): No description found for parameter 'attr' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:16 UTC |
| 4d26e13 | Magnus Damm | 10 March 2010, 11:50:38 UTC | Driver core: Early platform kernel-doc update This patch updates the kernel-doc notation for early platform functions. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:16 UTC |
| 3691c96 | Greg Kroah-Hartman | 15 March 2010, 21:01:55 UTC | sysfs: fix sysfs lockdep warning in mlx4 code This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:15 UTC |
| 21e3bde | Greg Kroah-Hartman | 15 March 2010, 21:01:25 UTC | sysfs: fix sysfs lockdep warning in infiniband code This fixes a sysfs lockdep warning in the infiniband code. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:13 UTC |
| c7df670 | Greg Kroah-Hartman | 15 March 2010, 20:59:51 UTC | sysfs: fix sysfs lockdep warning in ipmi code This fixes a sysfs lockdep warning in the ipmi code. Thanks to Eric Biederman and Yinghai Lu for the original versions of the patch, unfortunatly they did not submit them in a form they could be applied in. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:12 UTC |
| 6757eca | Mel Gorman | 10 March 2010, 22:48:34 UTC | sysfs: Initialised pci bus legacy_mem field before use PPC64 is failing to boot the latest mmotm due to an uninitialised pointer in pci_create_legacy_files(). The surprise is that machines boot at all and it would appear to affect current mainline as well. This patch fixes the problem. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:11 UTC |
| e1955ca | Jiri Kosina | 09 March 2010, 18:30:28 UTC | sysfs: use sysfs_bin_attr_init in firmware class driver Annotate dynamic sysfs attribute in fw_setup_device(). This gets rid of the following lockdep warning: bnx2 0000:08:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw BUG: key ffff880008293470 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2706 lockdep_init_map+0x562/0x620() Modules linked in: bnx2(+) sg tpm_bios floppy rtc_lib usb_storage i2c_piix4 joydev button container shpchp i2c_core sr_mod cdrom pci_hotplug usbhid hid ohci_hcd ehci_hcd sd_mod usbcore edd ext3 mbcache jbd fan ata_generic sata_svw pata_serverworks libata scsi_mod thermal processor Pid: 1915, comm: work_for_cpu Not tainted 2.6.34-rc1-default #81 Call Trace: [<ffffffff8107c1d2>] ? lockdep_init_map+0x562/0x620 [<ffffffff81049fd8>] warn_slowpath_common+0x78/0xd0 [<ffffffff8104a03f>] warn_slowpath_null+0xf/0x20 [<ffffffff8107c1d2>] lockdep_init_map+0x562/0x620 [<ffffffff8117a236>] ? sysfs_new_dirent+0x76/0x120 [<ffffffff8126edb2>] ? put_device+0x12/0x20 [<ffffffff811797cc>] sysfs_add_file_mode+0x6c/0xd0 [<ffffffff8117983c>] sysfs_add_file+0xc/0x10 [<ffffffff8117bf61>] sysfs_create_bin_file+0x21/0x30 [<ffffffff81279c61>] _request_firmware+0x2f1/0x650 [<ffffffff8127a04e>] request_firmware+0xe/0x10 [<ffffffffa01ec19e>] bnx2_init_one+0x8f5/0x177e [bnx2] [<ffffffff81389eab>] ? _raw_spin_unlock_irq+0x2b/0x40 [<ffffffff81040ed9>] ? finish_task_switch+0x69/0x100 [<ffffffff81040e70>] ? finish_task_switch+0x0/0x100 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30 [<ffffffff811e6302>] local_pci_probe+0x12/0x20 [<ffffffff81064b53>] do_work_for_cpu+0x13/0x30 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30 [<ffffffff81068c56>] kthread+0x96/0xa0 [<ffffffff81003e64>] kernel_thread_helper+0x4/0x10 [<ffffffff8138a350>] ? restore_args+0x0/0x30 [<ffffffff81068bc0>] ? kthread+0x0/0xa0 [<ffffffff81003e60>] ? kernel_thread_helper+0x0/0x10 ---[ end trace a2ecee9c9602d195 ]--- Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 19 March 2010, 14:12:10 UTC |
| 191aee5 | FUJITA Tomonori | 02 March 2010, 14:25:38 UTC | powerpc: Remove IOMMU_VMERGE config option The description says: Cause IO segments sent to a device for DMA to be merged virtually by the IOMMU when they happen to have been allocated contiguously. This doesn't add pressure to the IOMMU allocator. However, some drivers don't support getting large merged segments coming back from *_map_sg(). Most drivers don't have this problem; it is safe to say Y here. It's out of date. Long ago, drivers didn't have a way to tell IOMMUs about their segment length limit (that is, the maximum segment length that they can handle). So IOMMUs merged as many segments as possible and gave too large segments to drivers. dma_get_max_seg_size() was introduced to solve the above problem. Device drives can use the API to tell IOMMU about the maximum segment length that they can handle. In addition, the default limit (64K) should be safe for everyone. So this config option seems to be unnecessary. Note that this config option just enables users to disable the virtual merging by default. Users can still disable the virtual merging by the boot parameter. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 19 March 2010, 05:38:16 UTC |
| a932729 | FUJITA Tomonori | 16 March 2010, 13:16:25 UTC | powerpc: Fix swiotlb to respect the boot option powerpc initializes swiotlb before parsing the kernel boot options so swiotlb options (e.g. specifying the swiotlb buffer size) are ignored. Any time before freeing bootmem works for swiotlb so this patch moves powerpc's swiotlb initialization after parsing the kernel boot options, mem_init (as x86 does). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: Becky Bruce <beckyb@kernel.crashing.org> Tested-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 19 March 2010, 05:38:16 UTC |
