Revision b3760ce0a54409c32cd388e013f0bbbc27a6c71d authored by Daniel Fort on 10 September 2017, 18:43:38 UTC, committed by Daniel Fort on 10 September 2017, 18:43:38 UTC
Raw backend: allow displaying raw previews without conflicting with LiveView info bars
1 parent 0ae8464
installer.c
/** \file
* This is similar to boot-hack, but simplified. It only does the first-time install (bootflag setup).
*/
/*
* Copyright (C) 2009 Trammell Hudson <hudson+ml@osresearch.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the
* Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include "dryos.h"
#include "config.h"
#include "version.h"
#include "bmp.h"
#include "menu.h"
#include "property.h"
#include "consts.h"
#include "gui.h"
#define ARM_CPSR_FLAG_FIQ_MASKED (0x00000040)
#define ARM_CPSR_FLAG_IRQ_MASKED (0x00000080)
/* Notes from Horshack */
/**
* Btw I tested this in a stepwise fashion before actually implementing the code you see below.
* First I implemented an infinite loop with IRQ/FIQ disabled while the camera was running...
* I wanted to make sure there wasn't any watchdog timer that might execute due to the interrupts
* being disabled for an unknown period of time. Embedded systems use non-maskable watchdog timers
* as a way to detect when firmware is hung and to take recovery action...it usually works where at
* SOD firmware initializes the interval for the watchdog...then afterwards firmware is responsible
* for pinging a predefined timer register every so often to reset the watchdog, usually either in a
* timer interrupt or idle loop...if firmware fails to ping that register within the defined interval
* then a watchdog interrupt occurs even if IRQ/FIQ is disabled, at which time recovery action can be
* taken...I wanted to make sure this wouldn't happen on my body since that watchdog may occur while
* the flash is being erased/written, even though this interval is probably much longer than the time
* it takes for DisableBootDisk to complete. When I ran with IRQ/FIQ disabled in an infinite loop
* I confirmed that none of the UI buttons on the back were functioning...however I could see that
* the top panel buttons would still at least trigger a response on the top LCD (WB/AF/ISO buttons).
* I'm guessing these are handled by logic outside the main ARM processor? After a while of interacting
* with those top buttons while FW was in the dead IRQ/FIQ disable loop the body would eventually display
* "Error 80" on the top, which I'm guessing is some type of passive watchdog where hardware detects that
* firmware is no longer responding. Perhaps you know more about this interaction. Anyway, it took a least
* 10 seconds for that to occur so I was satisfied that no watchdog would occur for the short time
* DisableBootDisk was executing.
*
* Btw, another thing I noticed is that msleep() seems to enable IRQ/FIQ, because if I called it after
* disabling IRQ/FIQ the back-buttons would start responding.
*/
static void call_bootflag_eventproc(char* eventproc)
{
/* calling this one from LiveView will cause the routine to fail in the middle of writing to ROM */
/* result: will leave the bootflag area erased */
/* the visible effect is that camera will ask for a firmware update as soon as you remove the card or place a non-ML card */
/* we'll try to call this routine from Canon menu only (where the sensor should be inactive) */
if (CURRENT_GUI_MODE == GUIMODE_MENU && DISPLAY_IS_ON)
{
for (int i = 0; i < 10; i++)
{
bmp_printf(FONT_LARGE, 0, 450, eventproc);
info_led_blink(1, 50, 50);
}
/* Horshack suggested to run the bootflag routines with IRQ/FIQ disabled */
uint32_t old = cli();
if (CURRENT_GUI_MODE == GUIMODE_MENU && DISPLAY_IS_ON)
{
call( eventproc );
}
sei(old);
}
}
extern void _prop_request_change(unsigned property, const void* addr, size_t len);
static void
call_init_funcs()
{
extern struct task_create _init_funcs_start[];
extern struct task_create _init_funcs_end[];
struct task_create * init_func = _init_funcs_start;
for( ; init_func < _init_funcs_end ; init_func++ )
{
thunk entry = (thunk) init_func->entry;
entry();
}
}
#if defined(CONFIG_7D)
void _card_led_on() { *(volatile uint32_t*) (CARD_LED_ADDRESS) = (LEDON); }
void _card_led_off() { *(volatile uint32_t*) (CARD_LED_ADDRESS) = 0x38400; } //TODO: Check if this is correct, because reboot.c said 0x838C00
#elif defined(CARD_LED_ADDRESS) && defined(LEDON) && defined(LEDOFF)
void _card_led_on() { *(volatile uint32_t*) (CARD_LED_ADDRESS) = (LEDON); }
void _card_led_off() { *(volatile uint32_t*) (CARD_LED_ADDRESS) = (LEDOFF); }
#else
void _card_led_on() { return; }
void _card_led_off() { return; }
#endif
void info_led_on()
{
#ifdef CONFIG_VXWORKS
LEDBLUE = LEDON;
#elif defined(CONFIG_BLUE_LED)
call("EdLedOn");
#else
_card_led_on();
#endif
}
void info_led_off()
{
#ifdef CONFIG_VXWORKS
LEDBLUE = LEDOFF;
#elif defined(CONFIG_BLUE_LED)
call("EdLedOff");
#else
_card_led_off();
#endif
}
void info_led_blink(int times, int delay_on, int delay_off)
{
for (int i = 0; i < times; i++)
{
info_led_on();
msleep(delay_on);
info_led_off();
msleep(delay_off);
}
}
/** Shadow copy of the NVRAM boot flags stored at 0xF8000000 */
#define NVRAM_BOOTFLAGS ((void*) 0xF8000000)
struct boot_flags
{
uint32_t firmware; // 0x00
uint32_t bootdisk; // 0x04
uint32_t ram_exe; // 0x08
uint32_t update; // 0x0c
uint32_t flag_0x10;
uint32_t flag_0x14;
uint32_t flag_0x18;
uint32_t flag_0x1c;
};
static struct boot_flags * const boot_flags = NVRAM_BOOTFLAGS;
static void print_bootflags()
{
int values_w = bmp_printf( FONT_SMALL | FONT_ALIGN_RIGHT, 710, 0,
"%d\n%d\n%d\n%d\n",
boot_flags->firmware,
boot_flags->bootdisk,
boot_flags->ram_exe,
boot_flags->update
);
char* labels =
"Firmware\n"
"Bootdisk\n"
"RAM_EXE\n"
"Update\n";
int labels_w = bmp_string_width(FONT_SMALL, labels);
bmp_printf( FONT_SMALL, 700 - values_w - labels_w, 0, labels);
}
/** These are called when new tasks are created */
int my_init_task(int a, int b, int c, int d);
void my_bzero( uint8_t * base, uint32_t size );
/** This just goes into the bss */
#define RELOCSIZE 0x10000
static uint8_t _reloc[ RELOCSIZE ];
#define RELOCADDR ((uintptr_t) _reloc)
/** Translate a firmware address into a relocated address */
#define INSTR( addr ) ( *(uint32_t*)( (addr) - ROMBASEADDR + RELOCADDR ) )
/** Fix a branch instruction in the relocated firmware image */
#define FIXUP_BRANCH( rom_addr, dest_addr ) \
INSTR( rom_addr ) = BL_INSTR( &INSTR( rom_addr ), (dest_addr) )
/** Specified by the linker */
extern uint32_t _bss_start[], _bss_end[];
static inline void
zero_bss( void )
{
uint32_t *bss = _bss_start;
while( bss < _bss_end )
*(bss++) = 0;
}
void
__attribute__((noreturn,noinline,naked))
copy_and_restart( int offset )
{
zero_bss();
// Copy the firmware to somewhere safe in memory
const uint8_t * const firmware_start = (void*) ROMBASEADDR;
const uint32_t firmware_len = RELOCSIZE;
uint32_t * const new_image = (void*) RELOCADDR;
blob_memcpy( new_image, firmware_start, firmware_start + firmware_len );
/*
* in entry2() (0xff010134) make this change to
* return to our code before calling cstart().
* This should be a "BL cstart" instruction.
*/
INSTR( HIJACK_INSTR_BL_CSTART ) = RET_INSTR;
/*
* in cstart() (0xff010ff4) make these changes:
* calls bzero(), then loads bs_end and calls
* create_init_task
*/
// Reserve memory after the BSS for our application
INSTR( HIJACK_INSTR_BSS_END ) = (uintptr_t) _bss_end;
// Fix the calls to bzero32() and create_init_task()
FIXUP_BRANCH( HIJACK_FIXBR_BZERO32, bzero32 );
FIXUP_BRANCH( HIJACK_FIXBR_CREATE_ITASK, create_init_task );
// Set our init task to run instead of the firmware one
INSTR( HIJACK_INSTR_MY_ITASK ) = (uint32_t) my_init_task;
// Make sure that our self-modifying code clears the cache
sync_caches();
// We enter after the signature, avoiding the
// relocation jump that is at the head of the data
thunk reloc_entry = (thunk)( RELOCADDR + 0xC );
reloc_entry();
/*
* We're back!
* The RAM copy of the firmware startup has:
* 1. Poked the DMA engine with what ever it does
* 2. Copied the rw_data segment to 0x1900 through 0x20740
* 3. Zeroed the BSS from 0x20740 through 0x47550
* 4. Copied the interrupt handlers to 0x0
* 5. Copied irq 4 to 0x480.
* 6. Installed the stack pointers for CPSR mode D2 and D3
* (we are still in D3, with a %sp of 0x1000)
* 7. Returned to us.
*
* Now is our chance to fix any data segment things, or
* install our own handlers.
*/
// This will jump into the RAM version of the firmware,
// but the last branch instruction at the end of this
// has been modified to jump into the ROM version
// instead.
void (*ram_cstart)(void) = (void*) &INSTR( cstart );
ram_cstart();
// Unreachable
while(1)
;
}
static void hook_on_canon_menu()
{
gui_uilock(UILOCK_EVERYTHING);
if (CURRENT_GUI_MODE != GUIMODE_MENU)
{
SetGUIRequestMode(GUIMODE_MENU);
/* Canon menu may draw on the screen for a while, but we'll try to be faster */
for (int i = 0; i < 10; i++)
{
msleep(100);
bmp_fill(COLOR_BLACK, 0, 0, 720, 480);
bmp_printf(FONT_LARGE, 0, 0, "Magic Lantern install");
}
}
else
{
/* we are already in Canon menu - just clear the screen */
bmp_fill(COLOR_BLACK, 0, 0, 720, 480);
}
}
static void vram_update_luts();
static int install();
static int uninstall();
//~ Called from my_init_task
static void install_task();
/** Initial task setup.
*
* This is called instead of the task at 0xFF811DBC.
* It does all of the stuff to bring up the debug manager,
* the terminal drivers, stdio, stdlib and armlib.
*/
int my_init_task(int a, int b, int c, int d)
{
// Call their init task
int ans = init_task(a,b,c,d);
#if !defined(CONFIG_NO_ADDITIONAL_VERSION)
// Re-write the version string.
// Don't use strcpy() so that this can be done
// before strcpy() or memcpy() are located.
extern char additional_version[];
additional_version[0] = '-';
additional_version[1] = 'm';
additional_version[2] = 'l';
additional_version[3] = '\0';
#endif
msleep(3000);
task_create("install_task", 0x1b, 0x4000, install_task, 0);
return ans;
}
/* for printing messages */
static int normal_font = FONT_LARGE;
static int error_font = FONT(FONT_LARGE, COLOR_RED, COLOR_BLACK);
static int warning_font = FONT(FONT_LARGE, COLOR_YELLOW, COLOR_BLACK);
static int y = 0;
static int FH = 30; /* font height */
static int backup_region(char *file, uint32_t base, uint32_t length)
{
/* already backed up that region? */
uint32_t size = 0;
if((FIO_GetFileSize( file, &size ) == 0) && (size == length) )
{
return 1;
}
bmp_printf(FONT_LARGE, 0, y+=FH, "Backing up ROM%d...", file[11] - '0');
/* no, create file and store data */
FILE* handle = FIO_CreateFile(file);
if (handle)
{
FIO_WriteFile(handle, (void*)base, length);
FIO_CloseFile(handle);
}
else
{
bmp_printf(error_font, 0, y+=FH, "Could not backup ROM%d.", file[11] - '0');
return 0;
}
return 1;
}
static int rom_backup()
{
int ok0 = backup_region("ML/LOGS/ROM0.BIN", 0xF0000000, 0x01000000);
int ok1 = backup_region("ML/LOGS/ROM1.BIN", 0xF8000000, 0x01000000);
return ok0 && ok1;
}
/** Perform an initial install and configuration */
/** Return 1 on success, 0 on failure */
static int install(void)
{
FH = fontspec_font(normal_font)->height;
bmp_printf(normal_font, 0, y, "Magic Lantern install");
print_bootflags();
if (!is_file("AUTOEXEC.BIN"))
{
bmp_printf(warning_font, 0, y+=FH, "AUTOEXEC.BIN not found!");
bmp_printf(warning_font, 0, y+=FH, "Please copy all ML files.");
msleep(5000);
return 0;
}
if (!is_dir("ML"))
{
bmp_printf(warning_font, 0, y+=FH, "ML directory not found!");
bmp_printf(warning_font, 0, y+=FH, "Please copy all ML files.");
msleep(5000);
return 0;
}
if (!is_dir("ML/FONTS"))
{
bmp_printf(warning_font, 0, y+=FH, "FONTS directory not found!");
bmp_printf(warning_font, 0, y+=FH, "Please copy all ML files.");
msleep(5000);
return 0;
}
int rom_backup_done = rom_backup();
if (boot_flags->firmware)
{
bmp_printf(error_font, 0, y+=FH, "MAIN_FIRMWARE flag is DISABLED!");
bmp_printf(error_font, 0, y+=FH, "Please contact ML developers for a fix.");
msleep(5000);
return 0;
}
if (!boot_flags->bootdisk )
{
bmp_printf(FONT_LARGE, 0, y+=FH, "Setting boot flag...");
call_bootflag_eventproc( "EnableBootDisk" );
if (!boot_flags->bootdisk )
{
bmp_printf(error_font, 0, y+=FH, "Could not enable boot flag.");
msleep(5000);
return 0;
}
}
else
{
bmp_printf(FONT_LARGE, 0, y+=FH, "Boot flag is already set.");
}
bmp_printf(FONT_LARGE, 0, y+=FH, "Making card bootable...");
extern int bootflag_write_bootblock();
int bootflag_written = bootflag_write_bootblock();
if (!bootflag_written)
{
bmp_printf(warning_font, 0, y+=FH, "Could not make the card bootable.");
bmp_printf(warning_font, 0, y+=FH, "You need to run EOSCard or MacBoot.");
msleep(5000);
}
bmp_printf(FONT_LARGE, 0, y+=FH, "Done!");
bmp_fill(COLOR_BLACK, 0, 430, 720, 50);
y += 60;
print_bootflags();
bmp_printf(FONT(FONT_CANON, COLOR_GREEN2, COLOR_BLACK), 0, y, "Please restart your camera.");
y += 60;
if (rom_backup_done)
{
int fnt2 = FONT(FONT_MED, COLOR_GRAY(50), COLOR_BLACK);
int fnt1 = fnt2 | FONT_ALIGN_JUSTIFIED | FONT_TEXT_WIDTH(720-32);
int fh = fontspec_font(fnt1)->height;
bmp_printf(fnt1, 0, y+=fh, "After restart, please copy ML/LOGS/ROM*.BIN to PC, in a safe place.");
bmp_printf(fnt2, 0, y+=fh, "We may need these files in case of emergency.");
}
gui_uilock(UILOCK_SHUTTER);
for (int i = 60; i > 0; i--)
{
if (CURRENT_GUI_MODE != GUIMODE_MENU || !DISPLAY_IS_ON)
{
/* abort if user gets out of Canon menu */
return 0;
}
bmp_printf(FONT(FONT_MED, COLOR_YELLOW, COLOR_BLACK), 0, 480 - font_med.height,
"To uninstall Magic Lantern, please wait for %d seconds. ", i
);
info_led_blink(1,50,950);
/* attempt to reset the powersave timer */
int prolong = 3; /* AUTO_POWEROFF_PROLONG */
_prop_request_change(PROP_ICU_AUTO_POWEROFF, &prolong, 4);
}
return 1;
}
static int uninstall(void)
{
int y = 0;
bmp_printf(FONT_LARGE, 0, y, "Magic Lantern uninstall");
print_bootflags();
if (boot_flags->firmware)
{
bmp_printf(error_font, 0, y+=FH, "MAIN_FIRMWARE flag is DISABLED!");
bmp_printf(error_font, 0, y+=FH, "Please contact ML developers for a fix.");
msleep(5000);
return 0;
}
if (boot_flags->bootdisk )
{
bmp_printf(FONT_LARGE, 0, y+=FH, "Disabling boot flag...");
call_bootflag_eventproc( "DisableBootDisk" );
if (boot_flags->bootdisk )
{
bmp_printf(error_font, 0, y+=FH, "Could not disable boot flag.");
msleep(5000);
return 0;
}
}
else
{
bmp_printf(FONT_LARGE, 0, y+=FH, "Boot flag is not set.");
}
bmp_printf(FONT_LARGE, 0, y+=FH, "Done!");
bmp_fill(COLOR_BLACK, 0, 430, 720, 50);
return 1;
}
void install_task()
{
call("DisablePowerSave");
call_init_funcs();
vram_update_luts();
_find_ml_card();
_load_fonts();
bmp_printf(FONT_LARGE, 0, 0, "Please wait...");
msleep(1000);
hook_on_canon_menu();
/* initial install */
int ok = install();
if (ok)
{
/* install successful, user waited for 60 seconds => uninstall */
info_led_on();
hook_on_canon_menu();
uninstall();
}
/* finish uninstalling */
gui_uilock(UILOCK_SHUTTER);
while(1)
{
if (DISPLAY_IS_ON)
{
msleep(2000);
bmp_fill(COLOR_BLACK, 0, 420, 720, 60);
int fnt = FONT(FONT_CANON, COLOR_WHITE, COLOR_BLACK);
bmp_printf(fnt, 0, 430, "Please restart your camera.");
print_bootflags();
}
else
{
info_led_blink(1, 500, 500);
}
}
}
void redraw() { clrscr(); }
void gui_uilock(int what)
{
int unlocked = UILOCK_REQUEST | (UILOCK_NONE & 0xFFFF);
_prop_request_change(PROP_ICU_UILOCK, &unlocked, 4);
msleep(200);
what = UILOCK_REQUEST | (what & 0xFFFF);
_prop_request_change(PROP_ICU_UILOCK, &what, 4);
msleep(200);
}
/** Dummies **/
void ml_assert_handler(char* msg, char* file, int line, const char* func) {};
void bvram_mirror_init(){};
int display_is_on_550D = 0;
int get_display_is_on_550D() { return display_is_on_550D; }
void config_save(){};
int get_ms_clock_value() { return 0; }
char * get_task_name_from_id(int id) { return ""; }
void beep() {} ;
uint32_t ml_used_mem = 0;
uint32_t ml_reserved_mem = 0;
void menu_redraw() {} ;
int should_run_polling_action(int period_ms, int* last_updated_time) { return 0; }
void menu_add( const char * name, struct menu_entry * new_entry, int count ) {}
void menu_open_submenu() {}
void redraw_after(int time) {}
uint32_t edmac_get_address(uint32_t channel) { return 0; }
void EngDrvOut(uint32_t reg, uint32_t value) {}
int hdmi_code = 0;
void _update_vram_params(){};
void draw_line(int x1, int y1, int x2, int y2, int cl){}
void NotifyBox(int timeout, char* fmt, ...) {}
struct vram_info lv_vram;
struct vram_info * get_yuv422_vram() { lv_vram.vram = 0; return &lv_vram; }
struct memSuite * _shoot_malloc_suite(size_t size) { return 0; }
struct memSuite * _shoot_malloc_suite_contig(size_t size) { return 0; }
void _shoot_free_suite(struct memSuite * suite) {}
struct memSuite * _srm_malloc_suite(int num) { return 0; }
void _srm_free_suite(struct memSuite * suite) {}
char* get_current_task_name() { return "?"; }
int y_times_BMPPITCH_cache[BMP_H_PLUS - BMP_H_MINUS];
static void vram_update_luts()
{
for (int y = BMP_H_MINUS; y < BMP_H_PLUS; y++)
{
y_times_BMPPITCH_cache[y - BMP_H_MINUS] = y * BMPPITCH;
}
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...