b3f6c73 | Fabio Estevam | 10 December 2014, 01:39:53 UTC | mfd: da9052-core: Fix platform-device id collision Allow multiple DA9052 regulators be registered by registering with PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE. The subdevices are currently registered with PLATFORM_DEVID_NONE, which will cause a name collision on the platform bus when multiple regulators are registered: [ 0.128855] da9052-regulator da9052-regulator: invalid regulator ID specified [ 0.128973] da9052-regulator: probe of da9052-regulator failed with error -22 [ 0.129148] ------------[ cut here ]------------ [ 0.129200] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x7c() [ 0.129233] sysfs: cannot create duplicate filename '/devices/platform/soc/60000000.aips/63fc8000.i2c/i2c-0/0-0048/da9052-regulator ... [ 0.132891] ------------[ cut here ]------------ [ 0.132924] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x24c/0x2cc() [ 0.132957] kobject_add_internal failed for da9052-regulator with -EEXIST, don't try to register things with the same name in the same directory. ... [ 0.137000] da9052 0-0048: mfd_add_devices failed: -17 [ 0.138486] da9052: probe of 0-0048 failed with error -17 Based on the fix done by Johan Hovold at commit b6684228726cc255 ("mfd: viperboard: Fix platform-device id collision"). Tested on a imx53-qsb board, where multiple DA9053 regulators can be successfully probed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 20 January 2015, 12:52:48 UTC |
b7392d2 | Linus Torvalds | 29 December 2014, 00:49:37 UTC | Linux 3.19-rc2 | 29 December 2014, 00:49:37 UTC |
2ea1e35 | Linus Torvalds | 28 December 2014, 21:08:08 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM fixes from Paolo Bonzini: "The important fixes are for two bugs introduced by the merge window. On top of this, add a couple of WARN_ONs and stop spamming dmesg on pretty much every boot of a virtual machine" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: warn on more invariant breakage kvm: fix sorting of memslots with base_gfn == 0 kvm: x86: drop severity of "generation wraparound" message kvm: x86: vmx: reorder some msr writing | 28 December 2014, 21:08:08 UTC |
9a6b871 | Linus Torvalds | 28 December 2014, 21:02:27 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fix from Al Viro: "An embarrassing bug in lustre patches from this cycle ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] braino in "lustre: use is_root_inode()" | 28 December 2014, 21:02:27 UTC |
dbaff30 | Paolo Bonzini | 27 December 2014, 20:08:16 UTC | kvm: warn on more invariant breakage Modifying a non-existent slot is not allowed. Also check that the first loop doesn't move a deleted slot beyond the used part of the mslots array. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 28 December 2014, 09:01:25 UTC |
efbeec7 | Paolo Bonzini | 27 December 2014, 17:01:00 UTC | kvm: fix sorting of memslots with base_gfn == 0 Before commit 0e60b0799fed (kvm: change memslot sorting rule from size to GFN, 2014-12-01), the memslots' sorting key was npages, meaning that a valid memslot couldn't have its sorting key equal to zero. On the other hand, a valid memslot can have base_gfn == 0, and invalid memslots are identified by base_gfn == npages == 0. Because of this, commit 0e60b0799fed broke the invariant that invalid memslots are at the end of the mslots array. When a memslot with base_gfn == 0 was created, any invalid memslot before it were left in place. This can be fixed by changing the insertion to use a ">=" comparison instead of "<=", but some care is needed to avoid breaking the case of deleting a memslot; see the comment in update_memslots. Thanks to Tiejun Chen for posting an initial patch for this bug. Reported-by: Jamie Heilman <jamie@audible.transient.net> Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 28 December 2014, 09:01:17 UTC |
29169f8 | Linus Torvalds | 27 December 2014, 21:12:00 UTC | Merge tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a couple of fixes for the new Intel Skylake HD-audio support" * tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: apply the Seperate stream_tag for Skylake ALSA: hda_controller: Separate stream_tag for input and output streams. | 27 December 2014, 21:12:00 UTC |
a629df7 | Paolo Bonzini | 22 December 2014, 09:43:39 UTC | kvm: x86: drop severity of "generation wraparound" message Since most virtual machines raise this message once, it is a bit annoying. Make it KERN_DEBUG severity. Cc: stable@vger.kernel.org Fixes: 7a2e8aaf0f6873b47bc2347f216ea5b0e4c258ab Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 27 December 2014, 20:52:28 UTC |
baa0352 | Tiejun Chen | 23 December 2014, 08:21:11 UTC | kvm: x86: vmx: reorder some msr writing The commit 34a1cd60d17f, "x86: vmx: move some vmx setting from vmx_init() to hardware_setup()", tried to refactor some codes specific to vmx hardware setting into hardware_setup(), but some msr writing should depend on our previous setting condition like enable_apicv, enable_ept and so on. Reported-by: Jamie Heilman <jamie@audible.transient.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 27 December 2014, 20:52:10 UTC |
5242d42 | Al Viro | 27 December 2014, 03:43:19 UTC | [regression] braino in "lustre: use is_root_inode()" In one of the places (ll_md_blocking_ast()) we had open-coded !is_root_inode(inode) and replaced it with is_root_inode(inode). See the last chunk of f76c23: - inode != inode->i_sb->s_root->d_inode) + is_root_inode(inode)) should've been + !is_root_inode(inode)) obviously... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 27 December 2014, 03:43:19 UTC |
58628a7 | Linus Torvalds | 26 December 2014, 21:41:05 UTC | Merge branch 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc build fix from Helge Deller: "This unbreaks the kernel compilation on parisc with gcc-4.9" * 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix out-of-register compiler error in ldcw inline assembler function | 26 December 2014, 21:41:05 UTC |
45db073 | John David Anglin | 14 December 2014, 15:49:11 UTC | parisc: fix out-of-register compiler error in ldcw inline assembler function The __ldcw macro has a problem when its argument needs to be reloaded from memory. The output memory operand and the input register operand both need to be reloaded using a register in class R1_REGS when generating 64-bit code. This fails because there's only a single register in the class. Instead, use a memory clobber. This also makes the __ldcw macro a compiler memory barrier. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Helge Deller <deller@gmx.de> | 26 December 2014, 16:47:01 UTC |
d679582 | Libin Yang | 19 December 2014, 00:44:31 UTC | ALSA: hda_intel: apply the Seperate stream_tag for Skylake The total stream number of Skylake's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 26 December 2014, 11:21:31 UTC |
93e3423 | Rafal Redzimski | 19 December 2014, 00:44:30 UTC | ALSA: hda_controller: Separate stream_tag for input and output streams. Implemented separate stream_tag assignment for input and output streams. According to hda specification stream tag must be unique throughout the input streams group, however an output stream might use a stream tag which is already in use by an input stream. This change is necessary to support HW which provides a total of more than 15 stream DMA engines which with legacy implementation causes an overflow on SDxCTL.STRM field (and the whole SDxCTL register) and as a result usage of Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller. Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 26 December 2014, 11:21:21 UTC |
08b022a | Linus Torvalds | 26 December 2014, 00:04:15 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Xmas fixes pull: core: one atomic fix, revert the WARN_ON dumb buffers patch. agp: fixup Dave J. nouveau: fix 3.18 regression for old userspace tegra fixes: vblank and iommu fixes amdkfd: fix bugs shown by testing with userspace, init apertures once msm: hdmi fixes and cleanup i915: misc fixes There is also a link ordering fix that I've asked to be cc'ed to you, putting iommu before gpu, it fixes an issue with amdkfd when things are all in the kernel, but I didn't like sending it via my tree without discussion. I'll probably be a bit on/off for a few weeks with pulls now, due to holidays and LCA, so don't be surprised if stuff gets a bit backed up, and things end up a bit large due to lag" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2" agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags nouveau: bring back legacy mmap handler drm/msm/hdmi: rework HDMI IRQ handler drm/msm/hdmi: enable regulators before clocks to avoid warnings drm/msm/mdp5: update irqs on crtc<->encoder link change drm/msm: block incoming update on pending updates drm/atomic: fix potential null ptr on plane enable drm/msm: Deletion of unnecessary checks before the function call "release_firmware" drm/msm: Deletion of unnecessary checks before two function calls drm/tegra: dc: Select root window for event dispatch drm/tegra: gem: Use the proper size for GEM objects drm/tegra: gem: Flush buffer objects upon allocation drm/tegra: dc: Fix a potential race on page-flip completion drm/tegra: dc: Consistently use the same pipe drm/irq: Add drm_crtc_vblank_count() drm/irq: Add drm_crtc_handle_vblank() drm/irq: Add drm_crtc_send_vblank_event() drm/i915: Disable PSMI sleep messages on all rings around context switches drm/i915: Force the CS stall for invalidate flushes ... | 26 December 2014, 00:04:15 UTC |
ebda37c | Linus Torvalds | 25 December 2014, 23:56:34 UTC | Merge tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi Pull ipmi driver bugfixes from Corey Minyard: "Fix two bugs: One that lockdep turned up, I didn't go far enough with cleanup of attributes for IPMI. This has been there a long time; my previous fix of this didn't fix all the attributes. One fix for some arches that need an explicit linux/ctype.h for isspace()" * tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile issue with isspace() ipmi: Finish cleanup of BMC attributes | 25 December 2014, 23:56:34 UTC |
da6b51d | Dave Airlie | 24 December 2014, 03:11:17 UTC | Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2" This reverts commit 355a70183848f21198e9f6296bd646df3478a26d. This had some bad side effects under normal operation, and should have been dropped earlier. Signed-off-by: Dave Airlie <airlied@redhat.com> | 24 December 2014, 03:13:22 UTC |
0d83b72 | Dave Airlie | 24 December 2014, 02:59:08 UTC | Merge tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes - Display MEC fw version in topology. Without this, the HSA userspace stack is broken. - Init apertures information only once per process * tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: init aperture once per process amdkfd: Display MEC fw version in topology node drm/radeon: Add implementation of get_fw_version drm/amd: Add get_fw_version to kfd-->kgd interface | 24 December 2014, 02:59:08 UTC |
66b3f4f | Linus Torvalds | 24 December 2014, 02:13:16 UTC | Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit Pull audit fixes from Paul Moore: "Four patches to fix various problems with the audit subsystem, all are fairly small and straightforward. One patch fixes a problem where we weren't using the correct gfp allocation flags (GFP_KERNEL regardless of context, oops), one patch fixes a problem with old userspace tools (this was broken for a while), one patch fixes a problem where we weren't recording pathnames correctly, and one fixes a problem with PID based filters. In general I don't think there is anything controversial with this patchset, and it fixes some rather unfortunate bugs; the allocation flag one can be particularly scary looking for users" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: restore AUDIT_LOGINUID unset ABI audit: correctly record file names with different path name types audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb audit: don't attempt to lookup PIDs when changing PID filtering audit rules | 24 December 2014, 02:13:16 UTC |
041d7b9 | Richard Guy Briggs | 23 December 2014, 18:02:04 UTC | audit: restore AUDIT_LOGINUID unset ABI A regression was caused by commit 780a7654cee8: audit: Make testing for a valid loginuid explicit. (which in turn attempted to fix a regression caused by e1760bd) When audit_krule_to_data() fills in the rules to get a listing, there was a missing clause to convert back from AUDIT_LOGINUID_SET to AUDIT_LOGINUID. This broke userspace by not returning the same information that was sent and expected. The rule: auditctl -a exit,never -F auid=-1 gives: auditctl -l LIST_RULES: exit,never f24=0 syscall=all when it should give: LIST_RULES: exit,never auid=-1 (0xffffffff) syscall=all Tag it so that it is reported the same way it was set. Create a new private flags audit_krule field (pflags) to store it that won't interact with the public one from the API. Cc: stable@vger.kernel.org # v3.10-rc1+ Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com> | 23 December 2014, 21:40:18 UTC |
53262d1 | Linus Torvalds | 23 December 2014, 19:03:28 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - __cpu_suspend mm switching fix after warm boot - arch_setup_dma_ops implementation - pgd_page compilation error fix - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Add pgd_page to support RCU fast_gup arm64: defconfig: defconfig update for 3.19 arm64: kernel: fix __cpu_suspend mm switch on warm-boot arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops | 23 December 2014, 19:03:28 UTC |
5d96e0c | Jungseok Lee | 20 December 2014, 00:49:40 UTC | arm64: mm: Add pgd_page to support RCU fast_gup This patch adds pgd_page definition in order to keep supporting HAVE_GENERIC_RCU_GUP configuration. In addition, it changes pud_page expression to align with pmd_page for readability. An introduction of pgd_page resolves the following build breakage under 4KB + 4Level memory management combo. mm/gup.c: In function 'gup_huge_pgd': mm/gup.c:889:2: error: implicit declaration of function 'pgd_page' [-Werror=implicit-function-declaration] head = pgd_page(orig); ^ mm/gup.c:889:7: warning: assignment makes pointer from integer without a cast head = pgd_page(orig); Cc: Will Deacon <will.deacon@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> [catalin.marinas@arm.com: remove duplicate pmd_page definition] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 23 December 2014, 16:39:17 UTC |
f7bf130 | Will Deacon | 21 December 2014, 11:13:12 UTC | arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 23 December 2014, 16:39:17 UTC |
f43c271 | Lorenzo Pieralisi | 19 December 2014, 17:03:47 UTC | arm64: kernel: fix __cpu_suspend mm switch on warm-boot On arm64 the TTBR0_EL1 register is set to either the reserved TTBR0 page tables on boot or to the active_mm mappings belonging to user space processes, it must never be set to swapper_pg_dir page tables mappings. When a CPU is booted its active_mm is set to init_mm even though its TTBR0_EL1 points at the reserved TTBR0 page mappings. This implies that when __cpu_suspend is triggered the active_mm can point at init_mm even if the current TTBR0_EL1 register contains the reserved TTBR0_EL1 mappings. Therefore, the mm save and restore executed in __cpu_suspend might turn out to be erroneous in that, if the current->active_mm corresponds to init_mm, on resume from low power it ends up restoring in the TTBR0_EL1 the init_mm mappings that are global and can cause speculation of TLB entries which end up being propagated to user space. This patch fixes the issue by checking the active_mm pointer before restoring the TTBR0 mappings. If the current active_mm == &init_mm, the code sets the TTBR0_EL1 to the reserved TTBR0 mapping instead of switching back to the active_mm, which is the expected behaviour corresponding to the TTBR0_EL1 settings when __cpu_suspend was entered. Fixes: 95322526ef62 ("arm64: kernel: cpu_{suspend/resume} implementation") Cc: <stable@vger.kernel.org> # 3.14+: 18ab7db Cc: <stable@vger.kernel.org> # 3.14+: 714f599 Cc: <stable@vger.kernel.org> # 3.14+: c3684fb Cc: <stable@vger.kernel.org> # 3.14+ Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 23 December 2014, 16:38:50 UTC |
bd8136d | Dave Jones | 19 December 2014, 16:23:50 UTC | agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags - Remove soon-to-be-dead @redhat address. - Jeff Hartmann wrote the bulk of the original backend code, and should at least get a mention in the MODULE_AUTHOR for backend.o - Various people at Intel have done a lot more work than myself on the intel-* drivers, so again, mention that. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 23 December 2014, 10:03:10 UTC |
aa39477 | Linus Torvalds | 22 December 2014, 22:47:17 UTC | Merge tag 'dm-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Thre stable fixes and one fix for a regression introduced during 3.19 merge: - Fix inability to discard used space when the thin-pool target is in out-of-data-space mode and also transition the thin-pool back to write mode once free space is made available. - Fix DM core bio-based end_io bug that prevented proper post-processing of the error code returned from the block layer. - Fix crash in DM thin-pool due to thin device being added to the pool's active_thins list before properly initializing the thin device's refcount" * tag 'dm-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix missed error code if .end_io isn't implemented by target_type dm thin: fix crash by initializing thin device's refcount and completion earlier dm thin: fix missing out-of-data-space to write mode transition if blocks are released dm thin: fix inability to discard blocks when in out-of-data-space mode | 22 December 2014, 22:47:17 UTC |
48ec833 | Kirill A. Shutemov | 22 December 2014, 19:01:54 UTC | Revert "mm/memory.c: share the i_mmap_rwsem" This reverts commit c8475d144abb1e62958cc5ec281d2a9e161c1946. There are several[1][2] of bug reports which points to this commit as potential cause[3]. Let's revert it until we figure out what's going on. [1] https://lkml.org/lkml/2014/11/14/342 [2] https://lkml.org/lkml/2014/12/22/213 [3] https://lkml.org/lkml/2014/12/9/741 Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 22 December 2014, 22:27:34 UTC |
fc556fb | Dave Airlie | 22 December 2014, 22:24:26 UTC | Merge tag 'drm/tegra/for-3.19-rc1-fixes' of git://people.freedesktop.org/~tagr/linux into drm-fixes drm/tegra: Fixes for v3.19-rc1 This is a set of fixes for two regressions and one bug in the IOMMU mapping code. It turns out that all of these issues turn up primarily on Tegra30 hardware. The IOMMU mapping bug only manifests on buffers that aren't multiples of the page size. I happened to be testing HDMI with 1080p while writing the code and framebuffers for that happen to fit exactly within 2025 pages of 4 KiB each. One of the regressions is caused by the IOMMU code allocating pages from shmem which can have associated cache lines. If the pages aren't flushed then these cache lines may be flushed later on and cause framebuffer corruption. I'm not sure why I didn't see this before. Perhaps the board that I was using had enough RAM so that the pages shmem would hand out had a better chance of being unused. Or maybe I didn't look too closely. The fix for this is to fake up an SG table so that it can be passed to the DMA API. Ideally this would use drm_clflush_*(), but implementing that for ARM causes DRM to fail to build as a module since some of the low-level cache maintenance functions aren't exported. Hopefully we can get a suitable API exported on ARM for the next release. The second regression is caused by a mismatch between the hardware pipe number and the CRTC's DRM index. These were used inconsistently, which could cause one code location to call drm_vblank_get() with a different pipe than the corresponding drm_vblank_put(), thereby causing the reference count to become unbalanced. Alexandre also reported a possible race condition related to this, which this series also fixes. * tag 'drm/tegra/for-3.19-rc1-fixes' of git://people.freedesktop.org/~tagr/linux: drm/tegra: dc: Select root window for event dispatch drm/tegra: gem: Use the proper size for GEM objects drm/tegra: gem: Flush buffer objects upon allocation drm/tegra: dc: Fix a potential race on page-flip completion drm/tegra: dc: Consistently use the same pipe drm/irq: Add drm_crtc_vblank_count() drm/irq: Add drm_crtc_handle_vblank() drm/irq: Add drm_crtc_send_vblank_event() | 22 December 2014, 22:24:26 UTC |
a548a83 | Dave Airlie | 22 December 2014, 22:23:08 UTC | Merge tag 'drm-intel-next-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes misc i915 fixes. * tag 'drm-intel-next-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel: drm/i915: Disable PSMI sleep messages on all rings around context switches drm/i915: Force the CS stall for invalidate flushes drm/i915: Invalidate media caches on gen7 drm/i915: sanitize RPS resetting during GPU reset drm/i915: move RPS PM_IER enabling to gen6_enable_rps_interrupts drm/i915: vlv: fix IRQ masking when uninstalling interrupts | 22 December 2014, 22:23:08 UTC |
2e33054 | Dave Airlie | 22 December 2014, 22:22:22 UTC | Merge tag 'topic/atomic-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes Yeah a pull for one patch is a bit overkill but I started to assemble the various patches for 3.20 in a branch for atomic props/ioctl and didn't realize that this bugfix here at the beginnning of the branch should be in 3.19 (because msm is using the helpers arleady). So if you'd merge we'd have it twice or or I need to shuffle branches again. Can do if you want. * tag 'topic/atomic-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel: drm/atomic: fix potential null ptr on plane enable | 22 December 2014, 22:22:22 UTC |
955f6be | Dave Airlie | 22 December 2014, 22:21:54 UTC | Merge branch 'msm-fixes-3.19' of git://people.freedesktop.org/~robclark/linux into drm-fixes A few msm fixes for 3.19: * hdmi regulators fix * hdmi fix for spurious HPD interrupts * fix for sync atomic update after async update (which could show up with a setcrtc following a pageflip) * couple little Coccinelle cleanups * 'msm-fixes-3.19' of git://people.freedesktop.org/~robclark/linux: drm/msm/hdmi: rework HDMI IRQ handler drm/msm/hdmi: enable regulators before clocks to avoid warnings drm/msm/mdp5: update irqs on crtc<->encoder link change drm/msm: block incoming update on pending updates drm/msm: Deletion of unnecessary checks before the function call "release_firmware" drm/msm: Deletion of unnecessary checks before two function calls | 22 December 2014, 22:21:54 UTC |
2036eaa | Dave Airlie | 16 December 2014, 06:33:09 UTC | nouveau: bring back legacy mmap handler nouveau userspace back at 1.0.1 used to call the X server DRIOpenDRMMaster interface even for DRI2 (doh!), this attempts to map the sarea and fails if it can't. Since 884c6dabb0eafe7227f099c9e78e514191efaf13 from Daniel, this fails, but only ancient drivers would see it. Revert the nouveau bits of that fix. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # 3.18 Signed-off-by: Dave Airlie <airlied@redhat.com> | 22 December 2014, 22:11:43 UTC |
4a92843 | Paul Moore | 22 December 2014, 17:27:39 UTC | audit: correctly record file names with different path name types There is a problem with the audit system when multiple audit records are created for the same path, each with a different path name type. The root cause of the problem is in __audit_inode() when an exact match (both the path name and path name type) is not found for a path name record; the existing code creates a new path name record, but it never sets the path name in this record, leaving it NULL. This patch corrects this problem by assigning the path name to these newly created records. There are many ways to reproduce this problem, but one of the easiest is the following (assuming auditd is running): # mkdir /root/tmp/test # touch /root/tmp/test/567 # auditctl -a always,exit -F dir=/root/tmp/test # touch /root/tmp/test/567 Afterwards, or while the commands above are running, check the audit log and pay special attention to the PATH records. A faulty kernel will display something like the following for the file creation: type=SYSCALL msg=audit(1416957442.025:93): arch=c000003e syscall=2 success=yes exit=3 ... comm="touch" exe="/usr/bin/touch" type=CWD msg=audit(1416957442.025:93): cwd="/root/tmp" type=PATH msg=audit(1416957442.025:93): item=0 name="test/" inode=401409 ... nametype=PARENT type=PATH msg=audit(1416957442.025:93): item=1 name=(null) inode=393804 ... nametype=NORMAL type=PATH msg=audit(1416957442.025:93): item=2 name=(null) inode=393804 ... nametype=NORMAL While a patched kernel will show the following: type=SYSCALL msg=audit(1416955786.566:89): arch=c000003e syscall=2 success=yes exit=3 ... comm="touch" exe="/usr/bin/touch" type=CWD msg=audit(1416955786.566:89): cwd="/root/tmp" type=PATH msg=audit(1416955786.566:89): item=0 name="test/" inode=401409 ... nametype=PARENT type=PATH msg=audit(1416955786.566:89): item=1 name="test/567" inode=393804 ... nametype=NORMAL This issue was brought up by a number of people, but special credit should go to hujianyang@huawei.com for reporting the problem along with an explanation of the problem and a patch. While the original patch did have some problems (see the archive link below), it did demonstrate the problem and helped kickstart the fix presented here. * https://lkml.org/lkml/2014/9/5/66 Reported-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Richard Guy Briggs <rgb@redhat.com> | 22 December 2014, 17:27:39 UTC |
31dde11 | Catalin Marinas | 18 December 2014, 17:13:49 UTC | arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops Commit a3a60f81ee6f (dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops) changes the of_dma_configure() arch dma_ops callback to arch_setup_dma_ops but only the arch/arm code is updated. Subsequent commit 97890ba9289c (dma-mapping: detect and configure IOMMU in of_dma_configure) changes the arch_setup_dma_ops() prototype further to handle iommu. The patch makes the corresponding arm64 changes. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com> | 22 December 2014, 09:26:32 UTC |
e3fe142 | Corey Minyard | 16 December 2014, 14:36:32 UTC | ipmi: Fix compile issue with isspace() Some arches don't get ctypes.h included from these includes, so add it explicitly. Signed-off-by: Corey Minyard <cminyard@mvista.com> | 21 December 2014, 23:03:19 UTC |
9c63331 | Corey Minyard | 13 December 2014, 01:06:07 UTC | ipmi: Finish cleanup of BMC attributes The previous cleanup of BMC attributes left a few holes, and if you run with lockdep debugging with a BMC with the proper attributes, you could get a warning. This patch removes all the unused attributes from the BMC structure, since they are all declared in the .data section now. It makes the attributes all static. It fixes the referencing of the attributes in a couple of cases that dynamically added the files depending on BMC information. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Huang Ying <ying.huang@intel.com> Tested-by: Alexei Starovoitov <ast@plumgrid.com> | 21 December 2014, 23:00:59 UTC |
97bf6af | Linus Torvalds | 21 December 2014, 01:08:50 UTC | Linux 3.19-rc1 | 21 December 2014, 01:08:50 UTC |
60815cf | Linus Torvalds | 21 December 2014, 00:48:59 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux Pull ACCESS_ONCE cleanup preparation from Christian Borntraeger: "kernel: Provide READ_ONCE and ASSIGN_ONCE As discussed on LKML http://marc.info/?i=54611D86.4040306%40de.ibm.com ACCESS_ONCE might fail with specific compilers for non-scalar accesses. Here is a set of patches to tackle that problem. The first patch introduce READ_ONCE and ASSIGN_ONCE. If the data structure is larger than the machine word size memcpy is used and a warning is emitted. The next patches fix up several in-tree users of ACCESS_ONCE on non-scalar types. This does not yet contain a patch that forces ACCESS_ONCE to work only on scalar types. This is targetted for the next merge window as Linux next already contains new offenders regarding ACCESS_ONCE vs. non-scalar types" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux: s390/kvm: REPLACE barrier fixup with READ_ONCE arm/spinlock: Replace ACCESS_ONCE with READ_ONCE arm64/spinlock: Replace ACCESS_ONCE READ_ONCE mips/gup: Replace ACCESS_ONCE with READ_ONCE x86/gup: Replace ACCESS_ONCE with READ_ONCE x86/spinlock: Replace ACCESS_ONCE with READ_ONCE mm: replace ACCESS_ONCE with READ_ONCE or barriers kernel: Provide READ_ONCE and ASSIGN_ONCE | 21 December 2014, 00:48:59 UTC |
bfc7249 | Linus Torvalds | 21 December 2014, 00:42:36 UTC | Merge tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux Pull clk framework updates from Mike Turquette: "This is much later than usual due to several last minute bugs that had to be addressed. As usual the majority of changes are new drivers and modifications to existing drivers. The core recieved many fixes along with the groundwork for several large changes coming in the future which will better parition clock providers from clock consumers" * tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated ARM: OMAP3: clock: fix boot breakage in legacy mode ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs clk: Really fix deadlock with mmap_sem clk: mmp: fix sparse non static symbol warning clk: Change clk_ops->determine_rate to return a clk_hw as the best parent clk: change clk_debugfs_add_file to take a struct clk_hw clk: Don't expose __clk_get_accuracy clk: Don't try to use a struct clk* after it could have been freed clk: Remove unused function __clk_get_prepare_count clk: samsung: Fix double add of syscore ops after driver rebind clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi clk: samsung: exynos4415: Fix build with PM_SLEEP disabled clk: samsung: remove unnecessary inclusion of header files from clk.h clk: samsung: remove unnecessary CONFIG_OF from clk.c clk: samsung: Spelling s/bwtween/between/ clk: rockchip: Add support for the mmc clock phases using the framework clk: rockchip: add bindings for the mmc clocks clk: rockchip: rk3288 export i2s0_clkout for use in DT clk: rockchip: use clock ID for DMC (memory controller) on rk3288 ... | 21 December 2014, 00:42:36 UTC |
a4e1328 | Linus Torvalds | 20 December 2014, 21:52:52 UTC | Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "Included are two bugfixes needing some bigger refactoring (sh_mobile: deferred probe with DMA, mv64xxx: fix offload support) and one deprecated driver removal I thought would go in via ppc but I misunderstood. It has a proper ack from BenH" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sh_mobile: fix uninitialized var when debug is enabled macintosh: therm_pm72: delete deprecated driver i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA i2c: sh_mobile: rework deferred probing i2c: sh_mobile: refactor DMA setup i2c: mv64xxx: rework offload support to fix several problems i2c: mv64xxx: use BIT() macro for register value definitions | 20 December 2014, 21:52:52 UTC |
cdce6ac | Linus Torvalds | 20 December 2014, 21:42:57 UTC | Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI update from James Bottomley: "This is a much shorter set of patches that were on the go but didn't make it in to the early pull request for the merge window. It's really a set of bug fixes plus some final cleanup work on the new tag queue API" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: storvsc: ring buffer failures may result in I/O freeze ipr: set scsi_level correctly for disk arrays ipr: add support for async scanning to speed up boot scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case scsi_debug: take sdebug_host_list_lock when changing capacity scsi_debug: improve driver description in Kconfig scsi_debug: fix compare and write errors qla2xxx: fix race in handling rport deletion during recovery causes panic scsi: blacklist RSOC for Microsoft iSCSI target devices scsi: fix random memory corruption with scsi-mq + T10 PI Revert "[SCSI] mpt3sas: Remove phys on topology change" Revert "[SCSI] mpt2sas: Remove phys on topology change." esas2r: Correct typos of "validate" in a comment fc: FCP_PTA_SIMPLE is 0 ibmvfc: remove unused tag variable scsi: remove MSG_*_TAG defines scsi: remove scsi_set_tag_type scsi: remove scsi_get_tag_type scsi: never drop to untagged mode during queue ramp down scsi: remove ->change_queue_type method | 20 December 2014, 21:42:57 UTC |
5d6a546 | Linus Torvalds | 20 December 2014, 21:37:44 UTC | Merge tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull CONFIG_PM_RUNTIME elimination from Rafael Wysocki: "This removes the last few uses of CONFIG_PM_RUNTIME introduced recently and makes that config option finally go away. CONFIG_PM will be available directly from the menu now and also it will be selected automatically if CONFIG_SUSPEND or CONFIG_HIBERNATION is set" * tag 'pm-config-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Eliminate CONFIG_PM_RUNTIME tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM | 20 December 2014, 21:37:44 UTC |
787140a | Linus Torvalds | 20 December 2014, 21:33:03 UTC | Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild changes from Michal Marek: "There are only a few things in the misc branch: - Fix for bugon.cocci semantic patch - Kdevelop4 files are .gitignored - Put make binrpm-pkg on diet" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/package: binrpm-pkg do not create source and devel package .gitignore: Add Kdevelop4 project files bugon.cocci: fix Options at the macro | 20 December 2014, 21:33:03 UTC |
d08372c | Linus Torvalds | 20 December 2014, 21:31:14 UTC | Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: "Here are the kbuild changes for v3.19-rc1: - Cleanups and deduplication in the main Makefile and scripts/Makefile.* - Sort the output of *config targets in make help - Old <linux/version.h> is always removed to avoid a surprise during bisecting - Warning fix in kconfig" * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: remove redundant -rR flag of hdr-inst kbuild: Fix make help-<board series> on powerpc kbuild: Automatically remove stale <linux/version.h> file kconfig: Fix warning "‘jump’ may be used uninitialized" Makefile: sort list of defconfig targets in make help output kbuild: Remove duplicate $(cmd) definition in Makefile.clean kbuild: collect shorthands into scripts/Kbuild.include | 20 December 2014, 21:31:14 UTC |
fe07ade | Wolfram Sang | 16 December 2014, 12:31:26 UTC | i2c: sh_mobile: fix uninitialized var when debug is enabled Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> | 20 December 2014, 08:28:09 UTC |
ecb5ec0 | Linus Torvalds | 20 December 2014, 02:19:19 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile #3 from Al Viro: "Assorted fixes and patches from the last cycle" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] chunk lost from bd9b51 vfs: make mounts and mountstats honor root dir like mountinfo does vfs: cleanup show_mountinfo init: fix read-write root mount unfuck binfmt_misc.c (broken by commit e6084d4) vm_area_operations: kill ->migrate() new helper: iter_is_iovec() move_extent_per_page(): get rid of unused w_flags lustre: get rid of playing with ->fs btrfs: filp_open() returns ERR_PTR() on failure, not NULL... | 20 December 2014, 02:19:19 UTC |
298647e | Linus Torvalds | 20 December 2014, 02:15:12 UTC | Merge tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull eCryptfs fixes from Tyler Hicks: "Fixes for filename decryption and encrypted view plus a cleanup - The filename decryption routines were, at times, writing a zero byte one character past the end of the filename buffer - The encrypted view feature attempted, and failed, to roll its own form of enforcing a read-only mount instead of letting the VFS enforce it" * tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Remove buggy and unnecessary write in file name decode routine eCryptfs: Remove unnecessary casts when parsing packet lengths eCryptfs: Force RO mount when encrypted view is enabled | 20 December 2014, 02:15:12 UTC |
5c68eac | Linus Torvalds | 20 December 2014, 02:10:42 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull more btrfs updates from Chris Mason: "This is part two of our merge window patches. These are all from Filipe, and fix some really hard to find races that can cause corruptions. Most of them involved block group removal (balance) or discard" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: remove non-sense btrfs_error_discard_extent() function Btrfs: fix fs corruption on transaction abort if device supports discard Btrfs: always clear a block group node when removing it from the tree Btrfs: ensure deletion from pinned_chunks list is protected | 20 December 2014, 02:10:42 UTC |
20e471f | Linus Torvalds | 20 December 2014, 02:07:17 UTC | Merge tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a few fixes that have landed after the previous pull request. All are driver specific fixes including: - error/int value fixes in OXFW, - Intel Skylake HD-audio HDMI codec support, - Additional HD-audio Realtek codecs and AD1986A codec fixes/quirks, - a few more DSD support and a quirk for Arcam rPAC in usb-audio, - a typo fix for Scarlett 6i6, - fixes for new ASIHPI firmware, - ASoC Exynos7 cleanups, - Intel ACPI support, and - a fix for PCM512 register cache sync" * tag 'sound-fix-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC ALSA: hda/realtek - New codec support for ALC298 ALSA: asihpi: update to HPI version 4.14 ALSA: asihpi: increase tuner pad cache size ALSA: asihpi: relax firmware version check ALSA: usb-audio: Fix Scarlett 6i6 initialization typo ALSA: hda - Add quirk for Packard Bell EasyNote MX65 ALSA: usb-audio: add native DSD support for Matrix Audio DACs ALSA: hda/realtek - New codec support for ALC256 ALSA: hda/realtek - Add new Dell desktop for ALC3234 headset mode ASoC: Intel: fix possible acpi enumeration panic ALSA: hda/hdmi - apply Haswell fix-ups to Skylake display codec ASoC: Intel: fix return value check in sst_acpi_probe() ALSA: hda - Make add_stereo_mix_input flag tristate ALSA: hda - Create capture source ctls when stereo mix input is added ALSA: hda - Fix typos in snd_hda_get_int_hint() kerneldoc comments ALSA: hda - add codec ID for Skylake display audio codec ALSA: oxfw: some signedness bugs ALSA: oxfw: fix detect_loud_models() return value ASoC: rt5677: add REGMAP_I2C and REGMAP_IRQ dependency ... | 20 December 2014, 02:07:17 UTC |
ed55635 | Linus Torvalds | 20 December 2014, 02:02:22 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "The highlights this merge window include: - Allow target fabric drivers to function as built-in. (Roland) - Fix tcm_loop multi-TPG endpoint nexus bug. (Hannes) - Move per device config_item_type into se_subsystem_api, allowing configfs attributes to be defined at module_init time. (Jerome + nab) - Convert existing IBLOCK/FILEIO/RAMDISK/PSCSI/TCMU drivers to use external configfs attributes. (nab) - A number of iser-target fixes related to active session + network portal shutdown stability during extended stress testing. (Sagi + Slava) - Dynamic allocation of T10-PI contexts for iser-target, fixing a potentially bogus iscsi_np->tpg_np pointer reference in >= v3.14 code. (Sagi) - iser-target performance + scalability improvements. (Sagi) - Fixes for SPC-4 Persistent Reservation AllRegistrants spec compliance. (Ilias + James + nab) - Avoid potential short kern_sendmsg() in iscsi-target for now until Al's conversion to use msghdr iteration is merged post -rc1. (Viro) Also, Sagi has requested a number of iser-target patches (9) that address stability issues he's encountered during extended stress testing be considered for v3.10.y + v3.14.y code. Given the amount of LOC involved, it will certainly require extra backporting effort. Apologies in advance to Greg-KH & Co on this. Sagi and I will be working post-merge to ensure they each get applied correctly" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (53 commits) target: Allow AllRegistrants to re-RESERVE existing reservation uapi/linux/target_core_user.h: fix headers_install.sh badness iscsi-target: Fail connection on short sendmsg writes iscsi-target: nullify session in failed login sequence target: Avoid dropping AllRegistrants reservation during unregister target: Fix R_HOLDER bit usage for AllRegistrants iscsi-target: Drop left-over bogus iscsi_np->tpg_np iser-target: Fix wc->wr_id cast warning iser-target: Remove code duplication iser-target: Adjust log levels and prettify some prints iser-target: Use debug_level parameter to control logging level iser-target: Fix logout sequence iser-target: Don't wait for session commands from completion context iser-target: Reduce CQ lock contention by batch polling iser-target: Introduce isert_poll_budget iser-target: Remove an atomic operation from the IO path iser-target: Remove redundant call to isert_conn_terminate iser-target: Use single CQ for TX and RX iser-target: Centralize completion elements to a context iser-target: Cast wr_id with uintptr_t instead of unsinged long ... | 20 December 2014, 02:02:22 UTC |
5be95b7 | Linus Torvalds | 20 December 2014, 01:57:51 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel Pull arch/hexagon updates from Richard Kuo: "Build cleanup and a few misc fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: Hexagon: fix signal delivery for debug traps Hexagon: set ARCH_DMA_MINALIGN Hexagon: fix alignment of init_task in RW_DATA_SECTION hexagon: Fix build failures in linux-next | 20 December 2014, 01:57:51 UTC |
971d9e0 | Linus Torvalds | 20 December 2014, 01:08:14 UTC | Merge tag 'cris-changes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull arch/chris updates from Jesper Nilsson: "Mostly cleanup and build fixes for CRISv32 allmodconfig God Jul och Gott Nytt år!" * tag 'cris-changes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: CRISv32: Remove last remnants of ETRAX_SPI_MMC_BOARD CRISv32: ETRAXFS: Fix recursive spinlock CRISv32: Select MTDRAM for axisflashmap CRISv32: Implement early console CRIS: Use KALLSYMs if available in call stack dump CRISv32: Fix declaration mismatch CRISv32: Rewrite of synchronous serial port driver CRIS: Update init memory handling CRISv32: Better handling of watchdog bite CRIS: Export missing function symbols CRIS: Export ioremap_nocache CRIS: Fix headers_install CRISv32: Add missing include for mm.h CRISv32: Drop obsolete file for SPI driver | 20 December 2014, 01:08:14 UTC |
acab1f8 | Linus Torvalds | 20 December 2014, 01:07:27 UTC | Merge tag 'please-pull-misc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull ia64 __get_cpu_var removal from Tony Luck: "__get_cpu_var removed from rest of tree, drop reference from comments in arch/ia64" * tag 'please-pull-misc-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Update comment that references __get_cpu_var | 20 December 2014, 01:07:27 UTC |
54dc77d | Richard Guy Briggs | 19 December 2014, 04:09:27 UTC | audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb Eric Paris explains: Since kauditd_send_multicast_skb() gets called in audit_log_end(), which can come from any context (aka even a sleeping context) GFP_KERNEL can't be used. Since the audit_buffer knows what context it should use, pass that down and use that. See: https://lkml.org/lkml/2014/12/16/542 BUG: sleeping function called from invalid context at mm/slab.c:2849 in_atomic(): 1, irqs_disabled(): 0, pid: 885, name: sulogin 2 locks held by sulogin/885: #0: (&sig->cred_guard_mutex){+.+.+.}, at: [<ffffffff91152e30>] prepare_bprm_creds+0x28/0x8b #1: (tty_files_lock){+.+.+.}, at: [<ffffffff9123e787>] selinux_bprm_committing_creds+0x55/0x22b CPU: 1 PID: 885 Comm: sulogin Not tainted 3.18.0-next-20141216 #30 Hardware name: Dell Inc. Latitude E6530/07Y85M, BIOS A15 06/20/2014 ffff880223744f10 ffff88022410f9b8 ffffffff916ba529 0000000000000375 ffff880223744f10 ffff88022410f9e8 ffffffff91063185 0000000000000006 0000000000000000 0000000000000000 0000000000000000 ffff88022410fa38 Call Trace: [<ffffffff916ba529>] dump_stack+0x50/0xa8 [<ffffffff91063185>] ___might_sleep+0x1b6/0x1be [<ffffffff910632a6>] __might_sleep+0x119/0x128 [<ffffffff91140720>] cache_alloc_debugcheck_before.isra.45+0x1d/0x1f [<ffffffff91141d81>] kmem_cache_alloc+0x43/0x1c9 [<ffffffff914e148d>] __alloc_skb+0x42/0x1a3 [<ffffffff914e2b62>] skb_copy+0x3e/0xa3 [<ffffffff910c263e>] audit_log_end+0x83/0x100 [<ffffffff9123b8d3>] ? avc_audit_pre_callback+0x103/0x103 [<ffffffff91252a73>] common_lsm_audit+0x441/0x450 [<ffffffff9123c163>] slow_avc_audit+0x63/0x67 [<ffffffff9123c42c>] avc_has_perm+0xca/0xe3 [<ffffffff9123dc2d>] inode_has_perm+0x5a/0x65 [<ffffffff9123e7ca>] selinux_bprm_committing_creds+0x98/0x22b [<ffffffff91239e64>] security_bprm_committing_creds+0xe/0x10 [<ffffffff911515e6>] install_exec_creds+0xe/0x79 [<ffffffff911974cf>] load_elf_binary+0xe36/0x10d7 [<ffffffff9115198e>] search_binary_handler+0x81/0x18c [<ffffffff91153376>] do_execveat_common.isra.31+0x4e3/0x7b7 [<ffffffff91153669>] do_execve+0x1f/0x21 [<ffffffff91153967>] SyS_execve+0x25/0x29 [<ffffffff916c61a9>] stub_execve+0x69/0xa0 Cc: stable@vger.kernel.org #v3.16-rc1 Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Paul Moore <pmoore@redhat.com> | 19 December 2014, 23:37:56 UTC |
3640dcf | Paul Moore | 19 December 2014, 23:35:53 UTC | audit: don't attempt to lookup PIDs when changing PID filtering audit rules Commit f1dc4867 ("audit: anchor all pid references in the initial pid namespace") introduced a find_vpid() call when adding/removing audit rules with PID/PPID filters; unfortunately this is problematic as find_vpid() only works if there is a task with the associated PID alive on the system. The following commands demonstrate a simple reproducer. # auditctl -D # auditctl -l # autrace /bin/true # auditctl -l This patch resolves the problem by simply using the PID provided by the user without any additional validation, e.g. no calls to check to see if the task/PID exists. Cc: stable@vger.kernel.org # 3.15 Cc: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> | 19 December 2014, 23:35:53 UTC |
8bcabff | Jesper Nilsson | 29 October 2014, 09:15:35 UTC | CRISv32: Remove last remnants of ETRAX_SPI_MMC_BOARD There are no users of this symbol left. Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:06:13 UTC |
a3199ad | Jesper Nilsson | 27 October 2014, 08:11:31 UTC | CRISv32: ETRAXFS: Fix recursive spinlock Move pinmux alloc/dealloc code into functions that don't take the spinlock so we can use from code that has the spinlock already. CRISv32 has no working SMP, so spinlocks becomes a NOP, so deadlock was never seen. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:06:04 UTC |
9f1ad51 | Jesper Nilsson | 27 October 2014, 08:09:14 UTC | CRISv32: Select MTDRAM for axisflashmap Fixes compile error on allmodconfig. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:56 UTC |
4729d77 | Jesper Nilsson | 08 October 2014, 13:52:49 UTC | CRISv32: Implement early console Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:49 UTC |
421d085 | Jesper Nilsson | 08 October 2014, 12:57:35 UTC | CRIS: Use KALLSYMs if available in call stack dump Also, print kernel version on oops. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:36 UTC |
ca36c1f | Jesper Nilsson | 07 October 2014, 11:42:35 UTC | CRISv32: Fix declaration mismatch Drop i2c_init from this header, it was declared non-static here, but static in the C-file. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:21 UTC |
3f10462 | Jesper Nilsson | 07 October 2014, 11:40:08 UTC | CRISv32: Rewrite of synchronous serial port driver Make driver possible to load as a module and try to handle locking better. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:05:04 UTC |
80d6170 | Jesper Nilsson | 07 October 2014, 11:03:17 UTC | CRIS: Update init memory handling - Add free_initrd_mem as found by Guenter Roeck <linux@roeck-us.net> - Add free_init_pages - Export empty_zero_page symbol Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:04:52 UTC |
d6517c4 | Jesper Nilsson | 07 October 2014, 10:59:24 UTC | CRISv32: Better handling of watchdog bite Don't enter watchdog handling if we're already in watchdog handling. Also some minor formatting tweaks. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:04:39 UTC |
dbd3c7e | Jesper Nilsson | 07 October 2014, 10:20:47 UTC | CRIS: Export missing function symbols strcmp was lost when all other string functions were removed, but we still have an optimized version for this on CRISv32, so any driver built as a module would not have access to this symbol. In a similar manner, we had optimized versions of csum_partial_copy_from_user and __do_clear_user but no exported symbols for them, breaking bunch of other drivers when built as a module. At the same time, move EXPORT_SYMBOL(__copy_user) and EXPORT_SYMBOL(__copy_user_zeroing) C-files so it's located together with the function definition. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:03:22 UTC |
82e6df1 | Jesper Nilsson | 01 October 2014, 13:38:38 UTC | CRIS: Export ioremap_nocache Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:01:23 UTC |
6eb64b8 | Sam Ravnborg | 14 July 2014, 15:08:29 UTC | CRIS: Fix headers_install Fix headers_install by adjusting the path to arch files. And delete unused Kbuild file. Drop special handling of cris in the headers.sh script as a nice side-effect. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:01:12 UTC |
eeda008 | Jesper Nilsson | 30 September 2014, 13:34:10 UTC | CRISv32: Add missing include for mm.h Fixes the following compile error. arch/cris/arch-v32/kernel/time.c: In function 'reset_watchdog': arch/cris/arch-v32/kernel/time.c:121:2: error: implicit declaration of function 'global_page_state' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 23:00:57 UTC |
f89412a | Jesper Nilsson | 30 September 2014, 13:31:16 UTC | CRISv32: Drop obsolete file for SPI driver File was already deleted. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> | 19 December 2014, 22:59:37 UTC |
e589c9e | Linus Torvalds | 19 December 2014, 22:02:02 UTC | Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "After stopping the full x86/apic branch, I took some time to go through the first block of patches again, which are mostly cleanups and preparatory work for the irqdomain conversion and ioapic hotplug support. Unfortunaly one of the real problematic commits was right at the beginning, so I rebased this portion of the pending patches without the offenders. It would be great to get this into 3.19. That makes reworking the problematic parts simpler. The usual tip testing did not unearth any issues and it is fully bisectible now. I'm pretty confident that this wont affect the calmness of the xmas season. Changes: - Split the convoluted io_apic.c code into domain specific parts (vector, ioapic, msi, htirq) - Introduce proper helper functions to retrieve irq specific data instead of open coded dereferencing of pointers - Preparatory work for ioapic hotplug and irqdomain conversion - Removal of the non functional pci-ioapic driver - Removal of unused irq entry stubs - Make native_smp_prepare_cpus() preemtible to avoid GFP_ATOMIC allocations for everything which is called from there. - Small cleanups and fixes" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) iommu/amd: Use helpers to access irq_cfg data structure associated with IRQ iommu/vt-d: Use helpers to access irq_cfg data structure associated with IRQ x86: irq_remapping: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Use helpers to access irq_cfg data structure associated with IRQ x86, irq: Make MSI and HT_IRQ indepenent of X86_IO_APIC x86, irq: Move IRQ initialization routines from io_apic.c into vector.c x86, irq: Move IOAPIC related declarations from hw_irq.h into io_apic.h x86, irq: Move HT IRQ related code from io_apic.c into htirq.c x86, irq: Move PCI MSI related code from io_apic.c into msi.c x86, irq: Replace printk(KERN_LVL) with pr_lvl() utilities x86, irq: Make UP version of irq_complete_move() an inline stub x86, irq: Move local APIC related code from io_apic.c into vector.c x86, irq: Introduce helpers to access struct irq_cfg x86, irq: Protect __clear_irq_vector() with vector_lock x86, irq: Rename local APIC related functions in io_apic.c as apic_xxx() x86, irq: Refine hw_irq.h to prepare for irqdomain support x86, irq: Convert irq_2_pin list to generic list x86, irq: Kill useless parameter 'irq_attr' of IO_APIC_get_PCI_irq_vector() x86, irq, acpi: Get rid of special handling of GSI for ACPI SCI x86, irq: Introduce helper to check whether an IOAPIC has been registered ... | 19 December 2014, 22:02:02 UTC |
464ed18 | Rafael J. Wysocki | 19 December 2014, 14:37:54 UTC | PM: Eliminate CONFIG_PM_RUNTIME Having switched over all of the users of CONFIG_PM_RUNTIME to use CONFIG_PM directly, turn the latter into a user-selectable option and drop the former entirely from the tree. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> | 19 December 2014, 21:55:06 UTC |
4bb9374 | Linus Torvalds | 19 December 2014, 21:29:20 UTC | Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull NOHZ update from Thomas Gleixner: "Remove the call into the nohz idle code from the fake 'idle' thread in the powerclamp driver along with the export of those functions which was smuggeled in via the thermal tree. People have tried to hack around it in the nohz core code, but it just violates all rightful assumptions of that code about the only valid calling context (i.e. the proper idle task). The powerclamp trainwreck will still work, it just wont get the benefit of long idle sleeps" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/powerclamp: Remove tick_nohz_idle abuse | 19 December 2014, 21:29:20 UTC |
ac88ee3 | Linus Torvalds | 19 December 2014, 21:26:08 UTC | Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core fix from Thomas Gleixner: "A single fix plugging a long standing race between proc/stat and proc/interrupts access and freeing of interrupt descriptors" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent proc race against freeing of irq descriptors | 19 December 2014, 21:26:08 UTC |
a544557 | Linus Torvalds | 19 December 2014, 21:22:42 UTC | Merge branch 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MPX fixes from Thomas Gleixner: "Three updates for the new MPX infrastructure: - Use the proper error check in the trap handler - Add a proper config option for it - Bring documentation up to date" * 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, mpx: Give MPX a real config option prompt x86, mpx: Update documentation x86_64/traps: Fix always true condition | 19 December 2014, 21:22:42 UTC |
1092b59 | Linus Torvalds | 19 December 2014, 21:18:31 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This contains a single TLS ABI validation fix from Andy Lutomirski" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tls: Don't validate lm in set_thread_area() after all | 19 December 2014, 21:18:31 UTC |
88a5766 | Linus Torvalds | 19 December 2014, 21:15:24 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes and cleanups from Ingo Molnar: "A kernel fix plus mostly tooling fixes, but also some tooling restructuring and cleanups" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) perf: Fix building warning on ARM 32 perf symbols: Fix use after free in filename__read_build_id perf evlist: Use roundup_pow_of_two tools: Adopt roundup_pow_of_two perf tools: Make the mmap length autotuning more robust tools: Adopt rounddown_pow_of_two and deps tools: Adopt fls_long and deps tools: Move bitops.h from tools/perf/util to tools/ tools: Introduce asm-generic/bitops.h tools lib: Move asm-generic/bitops/find.h code to tools/include and tools/lib tools: Whitespace prep patches for moving bitops.h tools: Move code originally from asm-generic/atomic.h into tools/include/asm-generic/ tools: Move code originally from linux/log2.h to tools/include/linux/ tools: Move __ffs implementation to tools/include/asm-generic/bitops/__ffs.h perf evlist: Do not use hard coded value for a mmap_pages default perf trace: Let the perf_evlist__mmap autosize the number of pages to use perf evlist: Improve the strerror_mmap method perf evlist: Clarify sterror_mmap variable names perf evlist: Fixup brown paper bag on "hint" for --mmap-pages cmdline arg perf trace: Provide a better explanation when mmap fails ... | 19 December 2014, 21:15:24 UTC |
34b85e3 | Linus Torvalds | 19 December 2014, 20:57:45 UTC | Merge tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull second batch of powerpc updates from Michael Ellerman: "The highlight is the series that reworks the idle management on powernv, which allows us to use deeper idle states on those machines. There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem. An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we take it through the powerpc tree. A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit maintainers. A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file, so that tools can use it. Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and the patch to add __force to get_user() so we can use bitwise types" * tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Ignore smt-enabled on Power8 and later powerpc/uaccess: Allow get_user() with bitwise types powerpc/powernv: Expose OPAL firmware symbol map powernv/powerpc: Add winkle support for offline cpus powernv/cpuidle: Redesign idle states management powerpc/powernv: Enable Offline CPUs to enter deep idle states powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode i2c: Driver to expose PowerNV platform i2c busses powerpc: add little endian flag to syscall_get_arch() power/perf/hv-24x7: Use kmem_cache_free() instead of kfree powerpc/perf/hv-24x7: Use per-cpu page buffer cxl: Unmap MMIO regions when detaching a context cxl: Add timeout to process element commands cxl: Change contexts_lock to a mutex to fix sleep while atomic bug powerpc: Secondary CPUs must set cpu_callin_map after setting active and online | 19 December 2014, 20:57:45 UTC |
d5e80b4 | Dave Jones | 19 December 2014, 16:20:43 UTC | Update/Remove soon-to-be-dead email address I'm leaving Red Hat at the end of December 2014, so remove all references to my soon-to-be-dead address. (There are some references left in the tree, that need additional changes, I'll send those through the AGP maintainers). Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 20:56:15 UTC |
b074cf8 | Wolfram Sang | 05 November 2014, 22:44:11 UTC | macintosh: therm_pm72: delete deprecated driver The new driver is around for more than 2 years now, so the old one can go. Getting rid of it helps the removal of the legacy .attach_adapter callback of the I2C subsystem. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 19 December 2014, 18:32:47 UTC |
71504e5 | Rafael J. Wysocki | 19 December 2014, 14:27:58 UTC | tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM The 8250_omap serial driver is a new user of CONFIG_PM_RUNTIME. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in 8250_omap.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 19 December 2014, 14:27:58 UTC |
45544c8 | Rafael J. Wysocki | 19 December 2014, 14:26:46 UTC | sound: sst-haswell-pcm: Replace CONFIG_PM_RUNTIME with CONFIG_PM The sst-haswell-pcm driver is a new user of CONFIG_PM_RUNTIME. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in sound/soc/intel/sst-haswell-pcm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org> | 19 December 2014, 14:26:46 UTC |
47164fd | Rafael J. Wysocki | 19 December 2014, 14:25:31 UTC | spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM A couple of new CONFIG_PM_RUNTIME users have been added recently in the SPI subsystem. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under drivers/spi/ (again). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mark Brown <broonie@kernel.org> | 19 December 2014, 14:25:31 UTC |
a5fd973 | Thomas Gleixner | 18 December 2014, 10:51:01 UTC | tick/powerclamp: Remove tick_nohz_idle abuse commit 4dbd27711cd9 "tick: export nohz tick idle symbols for module use" was merged via the thermal tree without an explicit ack from the relevant maintainers. The exports are abused by the intel powerclamp driver which implements a fake idle state from a sched FIFO task. This causes all kinds of wreckage in the NOHZ core code which rightfully assumes that tick_nohz_idle_enter/exit() are only called from the idle task itself. Recent changes in the NOHZ core lead to a failure of the powerclamp driver and now people try to hack completely broken and backwards workarounds into the NOHZ core code. This is completely unacceptable and just papers over the real problem. There are way more subtle issues lurking around the corner. The real solution is to fix the powerclamp driver by rewriting it with a sane concept, but that's beyond the scope of this. So the only solution for now is to remove the calls into the core NOHZ code from the powerclamp trainwreck along with the exports. Fixes: d6d71ee4a14a "PM: Introduce Intel PowerClamp Driver" Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Pan Jacob jun <jacob.jun.pan@intel.com> Cc: LKP <lkp@01.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412181110110.17382@nanos Signed-off-by: Thomas Gleixner <tglx@linutronix.de> | 19 December 2014, 13:05:52 UTC |
e3bb504 | Al Viro | 19 December 2014, 12:11:56 UTC | [regression] chunk lost from bd9b51 Reported-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 19 December 2014, 12:13:21 UTC |
ac931f8 | Wang Nan | 16 December 2014, 06:19:06 UTC | perf: Fix building warning on ARM 32 Commit 85c116a6cb91 ("perf callchain: Make get_srcline fall back to sym+offset") introduces asprintf() call and matches '%ld' to a u64 argument, which is incorrect on ARM: CC /home/wn/util/srcline.o util/srcline.c: In function 'get_srcline': util/srcline.c:297:6: error: format '%ld' expects argument of type 'long int', but argument 4 has type 'u64' [-Werror=format] cc1: all warnings being treated as errors make[1]: *** [/home/wn/util/srcline.o] Error 1 In addition, all users of get_srcline() use u64 addr, and libbfd also use 64 bit bfd_vma as address. This patch also fix prototype of get_srcline() and addr2line() to use u64 addr instead of unsigned long. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: <lizefan@huawei.com> Cc: <a.p.zijlstra@chello.nl> Cc: <paulus@samba.org> Cc: <acme@kernel.org> Cc: <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1418710746-35943-1-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 19 December 2014, 12:09:43 UTC |
d790be3 | Linus Torvalds | 19 December 2014, 04:55:41 UTC | Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The exciting thing here is the getting rid of stop_machine on module removal. This is possible by using a simple atomic_t for the counter, rather than our fancy per-cpu counter: it turns out that no one is doing a module increment per net packet, so the slowdown should be in the noise" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: param: do not set store func without write perm params: cleanup sysfs allocation kernel:module Fix coding style errors and warnings. module: Remove stop_machine from module unloading module: Replace module_ref with atomic_t refcnt lib/bug: Use RCU list ops for module_bug_list module: Unlink module with RCU synchronizing instead of stop_machine module: Wait for RCU synchronizing before releasing a module | 19 December 2014, 04:55:41 UTC |
64ec45b | Linus Torvalds | 19 December 2014, 04:50:30 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael S Tsirkin: "virtio 1.0 related fixes Most importantly, this fixes using virtio_pci as a module. Further, the big virtio 1.0 conversion missed a couple of places. This fixes them up. This isn't 100% sparse-clean yet because on many architectures get_user triggers sparse warnings when used with __bitwise tag (when same tag is on both pointer and value read). I posted a patchset to fix it up by adding __force on all arches that don't already have it (many do), when that's merged these warnings will go away" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: restore module attributes mic/host: fix up virtio 1.0 APIs vringh: update for virtio 1.0 APIs vringh: 64 bit features tools/virtio: add virtio 1.0 in vringh_test tools/virtio: add virtio 1.0 in virtio_test tools/virtio: enable -Werror tools/virtio: 64 bit features tools/virtio: fix vringh test tools/virtio: more stubs virtio: core support for config generation virtio_pci: add VIRTIO_PCI_NO_LEGACY virtio_pci: move probe to common file virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY virtio_config: fix virtio_cread_bytes virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore | 19 December 2014, 04:50:30 UTC |
c0f486f | Linus Torvalds | 19 December 2014, 04:28:33 UTC | Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ... | 19 December 2014, 04:28:33 UTC |
385336e | Linus Torvalds | 19 December 2014, 04:24:55 UTC | Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: - thinkpad-acpi: Switch to software mute, cleanups - acerhdf: Bang-bang thermal governor, new models, cleanups - dell-laptop: New keyboard backlight support and documentation - toshiba_acpi: Keyboard backlight updates, hotkey handling - dell-wmi: Keypress filtering, WMI event processing - eeepc-laptop: Multiple cleanups, improved error handling, documentation - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails - misc: Code cleanups, quirks, various new IDs * tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits) platform/x86/acerhdf: Still depends on THERMAL Documentation: Add entry for dell-laptop sysfs interface acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control acerhdf: minor clean up acerhdf: added critical trip point acerhdf: Use bang-bang thermal governor acerhdf: Adding support for new models acerhdf: Adding support for "manual mode" dell-smo8800: Add more ACPI ids and change description of driver platform: x86: dell-laptop: Add support for keyboard backlight toshiba_acpi: Add keyboard backlight mode change event toshiba_acpi: Change notify funtion to handle more events toshiba_acpi: Move hotkey enabling code to its own function dell-wmi: Don't report keypresses on keybord illumination change dell-wmi: Don't report keypresses for radio state changes hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails toshiba-acpi: Add missing ID (TOS6207) Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put" platform: x86: Deletion of checks before backlight_device_unregister() ... | 19 December 2014, 04:24:55 UTC |
ebcffcd | Linus Torvalds | 19 December 2014, 04:21:32 UTC | Merge git://www.linux-watchdog.org/linux-watchdog Pull small watchdog update from Wim Van Sebroeck: - fix the argument of watchdog_active() in imx2_wdt - Add power management support to the imx2_wdt watchdog. * git://www.linux-watchdog.org/linux-watchdog: watchdog: imx2_wdt: Fix the argument of watchdog_active() watchdog: imx2_wdt: Add power management support. | 19 December 2014, 04:21:32 UTC |
0ec28c3 | Linus Torvalds | 19 December 2014, 04:14:49 UTC | Merge tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: - Move drivers for really old legacy hardware to staging. Those are using obsolete media kAPIs and are for hardware that nobody uses for years. Simply not worth porting them to the new kAPIs. Of course, if anyone pops up to fix, we can move them back from there - While not too late, do some API fixups at the new colorspace API, added for v3.19 - Some improvements for rcar_vin driver - Some fixups at cx88 and vivid drivers - Some Documentation fixups * tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] bq/c-qcam, w9966, pms: move to staging in preparation for removal [media] tlg2300: move to staging in preparation for removal [media] vino/saa7191: move to staging in preparation for removal [media] MAINTAINERS: vivi -> vivid [media] cx88: remove leftover start_video_dma() call [media] cx88: add missing alloc_ctx support [media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps [media] vivid: fix CROP_BOUNDS typo for video output [media] DocBook media: update version number and document changes [media] vivid.txt: document new controls [media] DocBook media: add missing ycbcr_enc and quantization fields [media] v4l2-mediabus.h: use two __u16 instead of two __u32 [media] rcar_vin: Fix interrupt enable in progressive [media] rcar_vin: Enable VSYNC field toggle mode [media] rcar_vin: Add scaling support [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs [media] rcar_vin: Add YUYV capture format support | 19 December 2014, 04:14:49 UTC |
4c929fe | Linus Torvalds | 19 December 2014, 04:10:44 UTC | Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.19: - On-demand paging support in core midlayer and mlx5 driver. This lets userspace create non-pinned memory regions and have the adapter HW trigger page faults. - iSER and IPoIB updates and fixes. - Low-level HW driver updates for cxgb4, mlx4 and ocrdma. - Other miscellaneous fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits) IB/mlx5: Implement on demand paging by adding support for MMU notifiers IB/mlx5: Add support for RDMA read/write responder page faults IB/mlx5: Handle page faults IB/mlx5: Page faults handling infrastructure IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation IB/mlx5: Changes in memory region creation to support on-demand paging IB/mlx5: Implement the ODP capability query verb mlx5_core: Add support for page faults events and low level handling mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag IB/srp: Allow newline separator for connection string IB/core: Implement support for MMU notifiers regarding on demand paging regions IB/core: Add support for on demand paging regions IB/core: Add flags for on demand paging support IB/core: Add support for extended query device caps IB/mlx5: Add function to read WQE from user-space IB/core: Add umem function to read data from user-space IB/core: Replace ib_umem's offset field with a full address IB/mlx5: Enhance UMR support to allow partial page table update IB/mlx5: Remove per-MR pas and dma pointers RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs ... | 19 December 2014, 04:10:44 UTC |
018cb13 | Linus Torvalds | 19 December 2014, 03:08:25 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc patches from Andrew Morton: "A few stragglers" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: tools/testing/selftests/Makefile: alphasort the TARGETS list mm/zsmalloc: adjust order of functions ocfs2: fix journal commit deadlock ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker ocfs2: reflink: fix slow unlink for refcounted file mm/memory.c:do_shared_fault(): add comment .mailmap: Santosh Shilimkar has moved .mailmap: update akpm@osdl.org lib/show_mem.c: add cma reserved information fs/proc/meminfo.c: include cma info in proc/meminfo mm: cma: split cma-reserved in dmesg log hfsplus: fix longname handling mm/mempolicy.c: remove unnecessary is_valid_nodemask() | 19 December 2014, 03:08:25 UTC |
96e869d | Andrew Morton | 19 December 2014, 00:17:43 UTC | tools/testing/selftests/Makefile: alphasort the TARGETS list This list is supposed to be sorted, to reduce patch collisions. Cc: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
66cdef6 | Ganesh Mahendran | 19 December 2014, 00:17:40 UTC | mm/zsmalloc: adjust order of functions Currently functions in zsmalloc.c does not arranged in a readable and reasonable sequence. With the more and more functions added, we may meet below inconvenience. For example: Current functions: void zs_init() { } static void get_maxobj_per_zspage() { } Then I want to add a func_1() which is called from zs_init(), and this new added function func_1() will used get_maxobj_per_zspage() which is defined below zs_init(). void func_1() { get_maxobj_per_zspage() } void zs_init() { func_1() } static void get_maxobj_per_zspage() { } This will cause compiling issue. So we must add a declaration: static void get_maxobj_per_zspage(); before func_1() if we do not put get_maxobj_per_zspage() before func_1(). In addition, puting module_[init|exit] functions at the bottom of the file conforms to our habit. So, this patch ajusts function sequence as: /* helper functions */ ... obj_location_to_handle() ... /* Some exported functions */ ... zs_map_object() zs_unmap_object() zs_malloc() zs_free() zs_init() zs_exit() Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
136f49b | Junxiao Bi | 19 December 2014, 00:17:37 UTC | ocfs2: fix journal commit deadlock For buffer write, page lock will be got in write_begin and released in write_end, in ocfs2_write_end_nolock(), before it unlock the page in ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask for the read lock of journal->j_trans_barrier. Holding page lock and ask for journal->j_trans_barrier breaks the locking order. This will cause a deadlock with journal commit threads, ocfs2cmt will get write lock of journal->j_trans_barrier first, then it wakes up kjournald2 to do the commit work, at last it waits until done. To commit journal, kjournald2 needs flushing data first, it needs get the cache page lock. Since some ocfs2 cluster locks are holding by write process, this deadlock may hung the whole cluster. unlock pages before ocfs2_run_deallocs() can fix the locking order, also put unlock before ocfs2_commit_trans() to make page lock is unlocked before j_trans_barrier to preserve unlocking order. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
1e58958 | Joseph Qi | 19 December 2014, 00:17:34 UTC | ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker Commit ac4fef4d23ed ("ocfs2/dlm: do not purge lockres that is queued for assert master") may have the following possible race case: dlm_dispatch_assert_master dlm_wq ======================================================================== queue_work(dlm->quedlm_worker, &dlm->dispatched_work); dispatch work, dlm_lockres_drop_inflight_worker *BUG_ON(res->inflight_assert_workers == 0)* dlm_lockres_grab_inflight_worker inflight_assert_workers++ So ensure inflight_assert_workers to be increased first. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Xue jiufei <xuejiufei@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
f62f12b | Junxiao Bi | 19 December 2014, 00:17:32 UTC | ocfs2: reflink: fix slow unlink for refcounted file When running ocfs2 test suite multiple nodes reflink stress test, for a 4 nodes cluster, every unlink() for refcounted file needs about 700s. The slow unlink is caused by the contention of refcount tree lock since all nodes are unlink files using the same refcount tree. When the unlinking file have many extents(over 1600 in our test), most of the extents has refcounted flag set. In ocfs2_commit_truncate(), it will execute the following call trace for every extents. This means it needs get and released refcount tree lock about 1600 times. And when several nodes are do this at the same time, the performance will be very low. ocfs2_remove_btree_range() -- ocfs2_lock_refcount_tree() ---- ocfs2_refcount_lock() ------ __ocfs2_cluster_lock() ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to do lock/unlock once can improve a lot performance. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Wengang <wen.gang.wang@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
d82fa87 | Andrew Morton | 19 December 2014, 00:17:29 UTC | mm/memory.c:do_shared_fault(): add comment Belatedly document the changes in commit f0c6d4d295e4 ("mm: introduce do_shared_fault() and drop do_fault()"). Cc: Andi Kleen <ak@linux.intel.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
48332f2 | Santosh Shilimkar | 19 December 2014, 00:17:26 UTC | .mailmap: Santosh Shilimkar has moved Add my new email address along with kernel.org email id Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |