b46637d | Ryan Ding | 25 March 2016, 21:20:55 UTC | ocfs2: use c_new to indicate newly allocated extents To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. There is a problem in ocfs2's direct io implement: if system crashed after extents allocated, and before data return, we will get a extent with dirty data on disk. This problem violate the journal=order semantics, which means meta changes take effect after data written to disk. To resolve this issue, direct write can use the UNWRITTEN flag to describe a extent during direct data writeback. The direct write procedure should act in the following order: phase 1: alloc extent with UNWRITTEN flag phase 2: submit direct data to disk, add zero page to page cache phase 3: clear UNWRITTEN flag when data has been written to disk This patch is to change the 'c_unwritten' member of ocfs2_write_cluster_desc to 'c_clear_unwritten'. Means whether to clear the unwritten flag. It do not care if a extent is allocated or not. And use 'c_new' to specify a newly allocated extent. So the direct io procedure can use c_clear_unwritten to control the UNWRITTEN bit on extent. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
c1ad1e3 | Ryan Ding | 25 March 2016, 21:20:52 UTC | ocfs2: add ocfs2_write_type_t type to identify the caller of write Patchset: fix ocfs2 direct io code patch to support sparse file and data ordering semantics The idea is to use buffer io(more precisely use the interface ocfs2_write_begin_nolock & ocfs2_write_end_nolock) to do the zero work beyond block size. And clear UNWRITTEN flag until direct io data has been written to disk, which can prevent data corruption when system crashed during direct write. And we will also archive a better performance: eg. dd direct write new file with block size 4KB: before this patchset: 2.5 MB/s after this patchset: 66.4 MB/s This patch (of 8): To support direct io in ocfs2_write_begin_nolock & ocfs2_write_end_nolock. Remove unused args filp & flags. Add new arg type. The type is one of buffer/direct/mmap. Indicate 3 way to perform write. buffer/mmap type has implemented. direct type will be implemented later. Signed-off-by: Ryan Ding <ryan.ding@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
9e13f1f | Junxiao Bi | 25 March 2016, 21:20:50 UTC | ocfs2: o2hb: fix double free bug This is a regression issue and caused the following kernel panic when do ocfs2 multiple test. BUG: unable to handle kernel paging request at 00000002000800c0 IP: [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 PGD 7bbe5067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi xen_kbdfront xen_netfront xen_fbfront xen_blkfront CPU: 2 PID: 4044 Comm: mpirun Not tainted 4.5.0-rc5-next-20160225 #1 Hardware name: Xen HVM domU, BIOS 4.3.1OVM 05/14/2014 task: ffff88007a521a80 ti: ffff88007aed0000 task.ti: ffff88007aed0000 RIP: 0010:[<ffffffff81192978>] [<ffffffff81192978>] kmem_cache_alloc+0x78/0x160 RSP: 0018:ffff88007aed3a48 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000001991 RDX: 0000000000001990 RSI: 00000000024000c0 RDI: 000000000001b330 RBP: ffff88007aed3a98 R08: ffff88007d29b330 R09: 00000002000800c0 R10: 0000000c51376d87 R11: ffff8800792cac38 R12: ffff88007cc30f00 R13: 00000000024000c0 R14: ffffffff811b053f R15: ffff88007aed3ce7 FS: 0000000000000000(0000) GS:ffff88007d280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000002000800c0 CR3: 000000007aeb2000 CR4: 00000000000406e0 Call Trace: __d_alloc+0x2f/0x1a0 d_alloc+0x17/0x80 lookup_dcache+0x8a/0xc0 path_openat+0x3c3/0x1210 do_filp_open+0x80/0xe0 do_sys_open+0x110/0x200 SyS_open+0x19/0x20 do_syscall_64+0x72/0x230 entry_SYSCALL64_slow_path+0x25/0x25 Code: 05 e6 77 e7 7e 4d 8b 08 49 8b 40 10 4d 85 c9 0f 84 dd 00 00 00 48 85 c0 0f 84 d4 00 00 00 49 63 44 24 20 49 8b 3c 24 48 8d 4a 01 <49> 8b 1c 01 4c 89 c8 65 48 0f c7 0f 0f 94 c0 3c 01 75 b6 49 63 RIP kmem_cache_alloc+0x78/0x160 CR2: 00000002000800c0 ---[ end trace 823969e602e4aaac ]--- Fixes: a4a1dfa4bb8b("ocfs2/cluster: fix memory leak in o2hb_region_release") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
b8b4ead | Andrew Morton | 25 March 2016, 21:20:47 UTC | drivers/input: eliminate INPUT_COMPAT_TEST macro INPUT_COMPAT_TEST became much simpler after commit f4056b52845283 ("input: redefine INPUT_COMPAT_TEST as in_compat_syscall()") so we can cleanly eliminate it altogether. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
bb29902 | Tetsuo Handa | 25 March 2016, 21:20:44 UTC | oom, oom_reaper: protect oom_reaper_list using simpler way "oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task" tried to protect oom_reaper_list using MMF_OOM_KILLED flag. But we can do it by simply checking tsk->oom_reaper_list != NULL. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
e267960 | Michal Hocko | 25 March 2016, 21:20:41 UTC | oom: make oom_reaper freezable After "oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space" oom_reaper will call exit_oom_victim on the target task after it is done. This might however race with the PM freezer: CPU0 CPU1 CPU2 freeze_processes try_to_freeze_tasks # Allocation request out_of_memory oom_killer_disable wake_oom_reaper(P1) __oom_reap_task exit_oom_victim(P1) wait_event(oom_victims==0) [...] do_exit(P1) perform IO/interfere with the freezer which breaks the oom_killer_disable semantic. We no longer have a guarantee that the oom victim won't interfere with the freezer because it might be anywhere on the way to do_exit while the freezer thinks the task has already terminated. It might trigger IO or touch devices which are frozen already. In order to close this race, make the oom_reaper thread freezable. This will work because a) already running oom_reaper will block freezer to enter the quiescent state b) wake_oom_reaper will not wake up the reaper after it has been frozen c) the only way to call exit_oom_victim after try_to_freeze_tasks is from the oom victim's context when we know the further interference shouldn't be possible Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
29c696e | Vladimir Davydov | 25 March 2016, 21:20:39 UTC | oom: make oom_reaper_list single linked Entries are only added/removed from oom_reaper_list at head so we can use a single linked list and hence save a word in task_struct. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
855b018 | Michal Hocko | 25 March 2016, 21:20:36 UTC | oom, oom_reaper: disable oom_reaper for oom_kill_allocating_task Tetsuo has reported that oom_kill_allocating_task=1 will cause oom_reaper_list corruption because oom_kill_process doesn't follow standard OOM exclusion (aka ignores TIF_MEMDIE) and allows to enqueue the same task multiple times - e.g. by sacrificing the same child multiple times. This patch fixes the issue by introducing a new MMF_OOM_KILLED mm flag which is set in oom_kill_process atomically and oom reaper is disabled if the flag was already set. Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
0304926 | Michal Hocko | 25 March 2016, 21:20:33 UTC | mm, oom_reaper: implement OOM victims queuing wake_oom_reaper has allowed only 1 oom victim to be queued. The main reason for that was the simplicity as other solutions would require some way of queuing. The current approach is racy and that was deemed sufficient as the oom_reaper is considered a best effort approach to help with oom handling when the OOM victim cannot terminate in a reasonable time. The race could lead to missing an oom victim which can get stuck out_of_memory wake_oom_reaper cmpxchg // OK oom_reaper oom_reap_task __oom_reap_task oom_victim terminates atomic_inc_not_zero // fail out_of_memory wake_oom_reaper cmpxchg // fails task_to_reap = NULL This race requires 2 OOM invocations in a short time period which is not very likely but certainly not impossible. E.g. the original victim might have not released a lot of memory for some reason. The situation would improve considerably if wake_oom_reaper used a more robust queuing. This is what this patch implements. This means adding oom_reaper_list list_head into task_struct (eat a hole before embeded thread_struct for that purpose) and a oom_reaper_lock spinlock for queuing synchronization. wake_oom_reaper will then add the task on the queue and oom_reaper will dequeue it. Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
bc448e8 | Michal Hocko | 25 March 2016, 21:20:30 UTC | mm, oom_reaper: report success/failure Inform about the successful/failed oom_reaper attempts and dump all the held locks to tell us more who is blocking the progress. [akpm@linux-foundation.org: fix CONFIG_MMU=n build] Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
36324a9 | Michal Hocko | 25 March 2016, 21:20:27 UTC | oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space When oom_reaper manages to unmap all the eligible vmas there shouldn't be much of the freable memory held by the oom victim left anymore so it makes sense to clear the TIF_MEMDIE flag for the victim and allow the OOM killer to select another task. The lack of TIF_MEMDIE also means that the victim cannot access memory reserves anymore but that shouldn't be a problem because it would get the access again if it needs to allocate and hits the OOM killer again due to the fatal_signal_pending resp. PF_EXITING check. We can safely hide the task from the OOM killer because it is clearly not a good candidate anymore as everyhing reclaimable has been torn down already. This patch will allow to cap the time an OOM victim can keep TIF_MEMDIE and thus hold off further global OOM killer actions granted the oom reaper is able to take mmap_sem for the associated mm struct. This is not guaranteed now but further steps should make sure that mmap_sem for write should be blocked killable which will help to reduce such a lock contention. This is not done by this patch. Note that exit_oom_victim might be called on a remote task from __oom_reap_task now so we have to check and clear the flag atomically otherwise we might race and underflow oom_victims or wake up waiters too early. Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
aac4536 | Michal Hocko | 25 March 2016, 21:20:24 UTC | mm, oom: introduce oom reaper This patch (of 5): This is based on the idea from Mel Gorman discussed during LSFMM 2015 and independently brought up by Oleg Nesterov. The OOM killer currently allows to kill only a single task in a good hope that the task will terminate in a reasonable time and frees up its memory. Such a task (oom victim) will get an access to memory reserves via mark_oom_victim to allow a forward progress should there be a need for additional memory during exit path. It has been shown (e.g. by Tetsuo Handa) that it is not that hard to construct workloads which break the core assumption mentioned above and the OOM victim might take unbounded amount of time to exit because it might be blocked in the uninterruptible state waiting for an event (e.g. lock) which is blocked by another task looping in the page allocator. This patch reduces the probability of such a lockup by introducing a specialized kernel thread (oom_reaper) which tries to reclaim additional memory by preemptively reaping the anonymous or swapped out memory owned by the oom victim under an assumption that such a memory won't be needed when its owner is killed and kicked from the userspace anyway. There is one notable exception to this, though, if the OOM victim was in the process of coredumping the result would be incomplete. This is considered a reasonable constrain because the overall system health is more important than debugability of a particular application. A kernel thread has been chosen because we need a reliable way of invocation so workqueue context is not appropriate because all the workers might be busy (e.g. allocating memory). Kswapd which sounds like another good fit is not appropriate as well because it might get blocked on locks during reclaim as well. oom_reaper has to take mmap_sem on the target task for reading so the solution is not 100% because the semaphore might be held or blocked for write but the probability is reduced considerably wrt. basically any lock blocking forward progress as described above. In order to prevent from blocking on the lock without any forward progress we are using only a trylock and retry 10 times with a short sleep in between. Users of mmap_sem which need it for write should be carefully reviewed to use _killable waiting as much as possible and reduce allocations requests done with the lock held to absolute minimum to reduce the risk even further. The API between oom killer and oom reaper is quite trivial. wake_oom_reaper updates mm_to_reap with cmpxchg to guarantee only NULL->mm transition and oom_reaper clear this atomically once it is done with the work. This means that only a single mm_struct can be reaped at the time. As the operation is potentially disruptive we are trying to limit it to the ncessary minimum and the reaper blocks any updates while it operates on an mm. mm_struct is pinned by mm_count to allow parallel exit_mmap and a race is detected by atomic_inc_not_zero(mm_users). Signed-off-by: Michal Hocko <mhocko@suse.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
69b27ba | Andrew Morton | 25 March 2016, 21:20:21 UTC | sched: add schedule_timeout_idle() This will be needed in the patch "mm, oom: introduce oom reaper". Acked-by: Michal Hocko <mhocko@suse.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 23:37:42 UTC |
1701f68 | Linus Torvalds | 25 March 2016, 16:02:13 UTC | Revert "ppdev: use new parport device model" This reverts commit e7223f18603374d235d8bb0398532323e5f318b9. It causes problems when a ppdev tries to register before the parport driver has been registered with the device model. That will trigger the BUG_ON(!drv->bus->p); at drivers/base/driver.c:153. The call chain is kernel_init -> kernel_init_freeable -> do_one_initcall -> ppdev_init -> __parport_register_driver -> driver_register *BOOM* Reported-by: kernel test robot <fengguang.wu@intel.com> Reported-by: Ross Zwisler <zwisler@gmail.com> Reported-by: Petr Mladek <pmladek@suse.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 25 March 2016, 16:02:13 UTC |
3b3b3bd | Linus Torvalds | 25 March 2016, 15:52:25 UTC | Merge tag 'firewire-update2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire leftover from Stefan Richter: "Occurrences of timeval were supposed to be eliminated last round, now remove a last forgotten one" * tag 'firewire-update2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: Replace timeval with timespec64 | 25 March 2016, 15:52:25 UTC |
f98c213 | Linus Torvalds | 25 March 2016, 15:48:31 UTC | Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just a couple of dma-buf related fixes and some amdgpu fixes, along with a regression fix for radeon off but default feature, but makes my 30" monitor happy again" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm/radeon/mst: cleanup code indentation drm/radeon/mst: fix regression in lane/link handling. drm/amdgpu: add invalidate_page callback for userptrs drm/amdgpu: Revert "remove the userptr rmn->lock" drm/amdgpu: clean up path handling for powerplay drm/amd/powerplay: fix memory leak of tdp_table dma-buf/fence: fix fence_is_later v2 dma-buf: Update docs for SYNC ioctl drm: remove excess description dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access() drm/atmel-hlcdc: use helper to get crtc state drm/atomic: use helper to get crtc state | 25 March 2016, 15:48:31 UTC |
11caf57 | Linus Torvalds | 25 March 2016, 06:13:48 UTC | Merge tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "There are only three patches this time, most other changes to files in include/asm-generic tend to go through the tree of whoever depends on the change. Two patches are cleanups for stuff that is no longer needed, the main change is to adapt the generic version of BUG_ON() for CONFIG_BUG=n to make it behave consistently with BUG(). This avoids undefined behavior along with a number of warnings about that undefined behavior in randconfig builds when we keep going on after hitting a BUG_ON()" * tag 'asm-generic-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: remove old nonatomic-io wrapper files asm-generic: default BUG_ON(x) to if(x)BUG() asm-generic: page.h: Remove useless get_user_page and free_user_page | 25 March 2016, 06:13:48 UTC |
4604202 | Dave Airlie | 25 March 2016, 06:02:06 UTC | Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux into drm-next some amd fixes * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/mst: cleanup code indentation drm/radeon/mst: fix regression in lane/link handling. drm/amdgpu: add invalidate_page callback for userptrs drm/amdgpu: Revert "remove the userptr rmn->lock" drm/amdgpu: clean up path handling for powerplay drm/amd/powerplay: fix memory leak of tdp_table | 25 March 2016, 06:02:06 UTC |
3d66c6b | Linus Torvalds | 25 March 2016, 05:59:58 UTC | Merge tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The second batch of power management and ACPI updates for v4.6. Included are fixups on top of the previous PM/ACPI pull request and other material that didn't make into it but still should go into 4.6. Among other things, there's a fix for an intel_pstate driver issue uncovered by recent cpufreq changes, a workaround for a boot hang on Skylake-H related to the handling of deep C-states by the platform and a PCI/ACPI fix for the handling of IO port resources on non-x86 architectures plus some new device IDs and similar. Specifics: - Fix for an intel_pstate driver issue related to the handling of MSR updates uncovered by the recent cpufreq rework (Rafael Wysocki). - cpufreq core cleanups related to starting governors and frequency synchronization during resume from system suspend and a locking fix for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran). - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang, Michael Neuling, Richard Cochran, Shilpasri Bhat). - intel_idle driver update preventing some Skylake-H systems from hanging during initialization by disabling deep C-states mishandled by the platform in the problematic configurations (Len Brown). - Intel Xeon Phi Processor x200 support for intel_idle (Dasaratharaman Chandramouli). - cpuidle menu governor updates to make it always honor PM QoS latency constraints (and prevent C1 from being used as the fallback C-state on x86 when they are set below its exit latency) and to restore the previous behavior to fall back to C1 if the next timer event is set far enough in the future that was changed in 4.4 which led to an energy consumption regression (Rik van Riel, Rafael Wysocki). - New device ID for a future AMD UART controller in the ACPI driver for AMD SoCs (Wang Hongcheng). - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage scaling (AVS) driver (David Wu). - ACPI PCI resources management fix for the handling of IO space resources on architectures where the IO space is memory mapped (IA64 and ARM64) broken by the introduction of common ACPI resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi). - Fix for the ACPI backend of the generic device properties API to make it parse non-device (data node only) children of an ACPI device correctly (Irina Tirdea). - Fixes for the handling of global suspend flags (introduced in 4.4) during hibernation and resume from it (Lukas Wunner). - Support for obtaining configuration information from Device Trees in the PM clocks framework (Jon Hunter). - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian King, Geert Uytterhoeven)" * tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM / AVS: rockchip-io: add io selectors and supplies for rk3399 intel_idle: Support for Intel Xeon Phi Processor x200 Product Family intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled ACPI / PM: Runtime resume devices when waking from hibernate PM / sleep: Clear pm_suspend_global_flags upon hibernate cpufreq: governor: Always schedule work on the CPU running update cpufreq: Always update current frequency before startig governor cpufreq: Introduce cpufreq_update_current_freq() cpufreq: Introduce cpufreq_start_governor() cpufreq: powernv: Add sysfs attributes to show throttle stats cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static PCI: ACPI: IA64: fix IO port generic range check ACPI / util: cast data to u64 before shifting to fix sign extension cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path cpuidle: menu: Fall back to polling if next timer event is near cpufreq: acpi-cpufreq: Clean up hot plug notifier callback intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts cpufreq: Make cpufreq_quick_get() safe to call ACPI / property: fix data node parsing in acpi_get_next_subnode() ACPI / APD: Add device HID for future AMD UART controller ... | 25 March 2016, 05:59:58 UTC |
8407ef4 | Linus Torvalds | 25 March 2016, 05:49:08 UTC | Merge tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull more RTC updates from Alexandre Belloni: "A second pull request for v4.6 with a few fixesi before -rc1. The new features for abx80x actually make the RTC behave correctly. Drivers: - abx80x: handle both XT and RC oscillators, XT failure bit and autocalibration - m41t80: avoid out of range year values - rv8803: workaround an i2c HW issue" * tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: abx80x: handle the oscillator failure bit rtc: abx80x: handle autocalibration rtc: rv8803: workaround i2c HW issue rtc: mcp795: add devicetree support rtc: asm9260: remove incorrect __init/__exit annotations rtc: m41t80: avoid out of range year values rtc: s3c: Don't print an error on probe deferral rtc: rv3029: stop mentioning rv3029c2 | 25 March 2016, 05:49:08 UTC |
b4ae78e | Linus Torvalds | 25 March 2016, 05:45:32 UTC | Merge tag 'hwmon-for-linus-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull more hwmon updates from Guenter Roeck: "Update hwmon mailing list and web page" * tag 'hwmon-for-linus-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: MAINTAINERS: Update mailing list and web page for hwmon subsystem | 25 March 2016, 05:45:32 UTC |
1d02369 | Linus Torvalds | 25 March 2016, 03:00:44 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull block fixes from Jens Axboe: "Final round of fixes for this merge window - some of this has come up after the initial pull request, and some of it was put in a post-merge branch before the merge window. This contains: - Fix for a bad check for an error on dma mapping in the mtip32xx driver, from Alexey Khoroshilov. - A set of fixes for lightnvm, from Javier, Matias, and Wenwei. - An NVMe completion record corruption fix from Marta, ensuring that we read things in the right order. - Two writeback fixes from Tejun, marked for stable@ as well. - A blk-mq sw queue iterator fix from Thomas, fixing an oops for sparse CPU maps. They hit this in the hot plug/unplug rework" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: avoid cqe corruption when update at the same time as read writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list() blk-mq: Use proper cpumask iterator mtip32xx: fix checks for dma mapping errors lightnvm: do not load L2P table if not supported lightnvm: do not reserve lun on l2p loading nvme: lightnvm: return ppa completion status lightnvm: add a bitmap of luns lightnvm: specify target's logical address area null_blk: add lightnvm null_blk device to the nullb_list | 25 March 2016, 03:00:44 UTC |
8f40842 | Linus Torvalds | 25 March 2016, 02:57:15 UTC | Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ... | 25 March 2016, 02:57:15 UTC |
8887566 | Linus Torvalds | 25 March 2016, 02:55:41 UTC | Merge tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs Pull UBI/UBIFS updates from Richard Weinberger: "This contains cleanups and a maintainer update for UBI and UBIFS" * tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs: ubifs: Remove unused header MAINTAINERS: Update UBIFS entry mtd: ubi: Add logging functions ubi_msg, ubi_warn and ubi_err ubifs: Add logging functions for ubifs_msg, ubifs_err and ubifs_warn | 25 March 2016, 02:55:41 UTC |
8b306a2 | Linus Torvalds | 25 March 2016, 02:50:32 UTC | Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux Pull more nfsd updates from Bruce Fields: "Apologies for the previous request, which omitted the top 8 commits from my for-next branch (including the SCSI layout commits). Thanks to Trond for spotting my error!" This actually includes the new layout types, so here's that part of the pull message repeated: "Support for a new pnfs layout type from Christoph Hellwig. The new layout type is a variant of the block layout which uses SCSI features to offer improved fencing and device identification. Note this pull request also includes the client side of SCSI layout, with Trond's permission" * tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux: nfsd: use short read as well as i_size to set eof nfsd: better layoutupdate bounds-checking nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK nfsd: add SCSI layout support nfsd: move some blocklayout code nfsd: add a new config option for the block layout driver nfs/blocklayout: add SCSI layout support nfs4.h: add SCSI layout definitions | 25 March 2016, 02:50:32 UTC |
70c5eb8 | Linus Torvalds | 25 March 2016, 02:42:50 UTC | Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild misc updates from Michal Marek: "The non-critical part of kbuild for v4.6-rc1: - coccinelle cleanup and a new patch - make tags rule for kprobe helpers - make rpm fix to avoid spurious grub2 entries - make rpm support for %postun script (Fedora only at the moment)" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild/mkspec: clean boot loader configuration on rpm removal kbuild/mkspec: fix grub2 installkernel issue Coccinelle: Add api/setup_timer.cocci coccinelle: bugon: reduce rule applicability Coccinelle: pm_runtime: reduce rule applicability Coccinelle: array_size: reduce rule applicability Coccinelle: reduce rule applicability scripts/tags.sh: add regex to map kprobe helpers scripts/coccinelle: modernize & | 25 March 2016, 02:42:50 UTC |
3a1ef0e | Linus Torvalds | 25 March 2016, 02:39:28 UTC | Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Just two kconfig commits this time: - kconfig Makefile fix for make 3.80 - Fix calculating symbols so that KCONFIG_ALLCONFIG=... does not disable CONFIG_MODULES silently" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: unbreak allmodconfig KCONFIG_ALLCONFIG=... scripts/kconfig: allow building with make 3.80 again | 25 March 2016, 02:39:28 UTC |
2162b80 | Linus Torvalds | 25 March 2016, 02:26:47 UTC | Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - make dtbs_install fix - Error handling fix fixdep and link-vmlinux.sh - __UNIQUE_ID fix for clang - Fix for if_changed_* to suppress the "is up to date." message - The kernel is built with -Werror=incompatible-pointer-types * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Add option to turn incompatible pointer check into error kbuild: suppress annoying "... is up to date." message kbuild: fixdep: Check fstat(2) return value scripts/link-vmlinux.sh: force error on kallsyms failure Kbuild: provide a __UNIQUE_ID for clang dtbsinstall: don't move target directory out of the way | 25 March 2016, 02:26:47 UTC |
976fb3f | Linus Torvalds | 25 March 2016, 02:16:20 UTC | Merge branch 'parisc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "This patchset adds stack usage debug info for parisc and metag (on both the stack grows upwards), switches to the new generic realative extable search and sort routines, drops the long time ago removed syscalls alloc_hugepages and free_hugepages and wires up the new preadv2 and pwritev2 syscalls" * 'parisc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up preadv2 and pwritev2 syscalls parisc: Use generic extable search and sort routines parisc: Panic immediately when panic_on_oops parisc,metag: Implement CONFIG_DEBUG_STACK_USAGE option parisc: Drop alloc_hugepages and free_hugepages syscalls | 25 March 2016, 02:16:20 UTC |
9d85460 | Linus Torvalds | 25 March 2016, 02:13:59 UTC | Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull second set of arm64 updates from Catalin Marinas: - KASLR bug fixes: use callee-saved register, boot-time I-cache maintenance - inv_entry asm macro fix (EL0 check typo) - pr_notice("Virtual kernel memory layout...") splitting - Clean-ups: use p?d_set_huge consistently, allow preemption around copy_to_user_page, remove unused __local_flush_icache_all() * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: allow preemption in copy_to_user_page arm64: consistently use p?d_set_huge arm64: kaslr: use callee saved register to preserve SCTLR across C call arm64: Split pr_notice("Virtual kernel memory layout...") into multiple pr_cont() arm64: drop unused __local_flush_icache_all() arm64: fix KASLR boot-time I-cache maintenance arm64/kernel: fix incorrect EL0 check in inv_entry macro | 25 March 2016, 02:13:59 UTC |
8a20a04 | Linus Torvalds | 25 March 2016, 02:01:38 UTC | Merge tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull more ARM DT changes from Arnd Bergmann: "Here are some final updates for ARM SoC specific dts files: - The i.MX changes were sent relatively late, and had a dependency on the clk tree, so I delayed that a bit. Support for the new i.MX6qp SoC and a couple of new boards is added in this branch. - Uniphier renames a few files to match the final product names that were decided by the company, kudos to the kernel developer(s) for getting support upstream before the product release. Also two boards are added. The patches were posted early enough and nice overall, but we forgot to apply them and decided to give it some more time in linux-next - at91 has two small bug fixes" * tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator ARM: dts: uniphier: add pinmux node for I2C ch4 ARM: dts: uniphier: add @{address} to EEPROM node ARM: dts: uniphier: add PH1-Pro4 Sanji board support ARM: dts: uniphier: add PH1-Pro4 Ace board support ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board ARM: dts: uniphier: add reference clock nodes ARM: dts: uniphier: rework UniPhier System Bus nodes ARM: dts: uniphier: factor out ranges property of support card arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20 ARM: dts: imx53-qsb: Fix gpio button polarity ARM: dts: vfxxx: Add DAC node for Vybrid SoC ARM: dts: imx6q: add missing links between ipu2 and mipi dsi ARM: dts: imx: Add support for Advantech/GE B850v3 ARM: dts: imx: Add support for Advantech/GE B650v3 ARM: dts: imx: Add support for Advantech/GE B450v3 ARM: dts: imx: Add support for Advantech/GE Bx50v3 ARM: dts: imx: Add Advantech BA-16 Qseven module ... | 25 March 2016, 02:01:38 UTC |
732b84e | Linus Torvalds | 25 March 2016, 01:56:51 UTC | Merge tag 'for-4.6' of git://git.osdn.jp/gitroot/uclinux-h8/linux Pull h8300 updates from Yoshinori Sato: "Various h8300 fixes" * tag 'for-4.6' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: switch EARLYCON h8300: dts: Rename the serial port clock to fck | 25 March 2016, 01:56:51 UTC |
ee08774 | Mylène Josserand | 21 March 2016, 17:06:10 UTC | rtc: abx80x: handle the oscillator failure bit Handle the Oscillator Failure ('OF') bit from Oscillator Status register (0x1D). This bit is cleared on set_time function and is read each time the date/time is read, but only in case of XT Oscillator selection. In RC mode, this bit is always set. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 25 March 2016, 01:41:13 UTC |
59a8383 | Mylène Josserand | 21 March 2016, 17:06:09 UTC | rtc: abx80x: handle autocalibration The autocalibration is separated in two bits to set in Oscillator Control register (0x1c) : - OSEL bit to select the oscillator type (XT or RC). - ACAL bit to select the autocalibration type. These functionnalities are exported in sysfs entries : "oscillator" and "autocalibration". Respectively, the values are "xtal" for XT oscillator and "rc" for RC oscillator and 0 to disable the autocalibration cycle, 512 for a 512 seconds autocalibration cycle and 1024 for a cycle of 1024 seconds. Examples : Set to XT Oscillator echo xtal > /sys/class/rtc/rtc0/device/oscillator Activate an autocalibration every 512 seconds echo 512 > /sys/class/rtc/rtc0/device/autocalibration Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 25 March 2016, 01:41:13 UTC |
85062c9 | Alexandre Belloni | 21 March 2016, 14:58:38 UTC | rtc: rv8803: workaround i2c HW issue The rv8803 has a 60µs window where it will not answer on the i2c bus. It also means there will be no ack for the communication. Make sure communication is tried multiple times when this happens (the i2c subsystem mandates -ENXIO is that case but the number of retries is host specific). The critical parts are the probe function and the alarm callback so make sure we handle the failure there. Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 25 March 2016, 01:38:59 UTC |
ee0140d | Rafael J. Wysocki | 24 March 2016, 23:59:41 UTC | Merge branches 'acpi-soc', 'acpi-misc', 'acpi-pci' and 'device-properties' * acpi-soc: ACPI / APD: Add device HID for future AMD UART controller * acpi-misc: ACPI / util: cast data to u64 before shifting to fix sign extension * acpi-pci: PCI: ACPI: IA64: fix IO port generic range check * device-properties: ACPI / property: fix data node parsing in acpi_get_next_subnode() | 24 March 2016, 23:59:41 UTC |
3513ac7 | Rafael J. Wysocki | 24 March 2016, 23:58:18 UTC | Merge branches 'pm-avs', 'pm-clk', 'pm-devfreq' and 'pm-sleep' * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3399 * pm-clk: PM / clk: Add support for obtaining clocks from device-tree * pm-devfreq: PM / devfreq: Spelling s/frequnecy/frequency/ * pm-sleep: ACPI / PM: Runtime resume devices when waking from hibernate PM / sleep: Clear pm_suspend_global_flags upon hibernate | 24 March 2016, 23:58:18 UTC |
33068b6 | Rafael J. Wysocki | 24 March 2016, 23:57:22 UTC | Merge branches 'pm-cpufreq' and 'pm-cpuidle' * pm-cpufreq: cpufreq: governor: Always schedule work on the CPU running update cpufreq: Always update current frequency before startig governor cpufreq: Introduce cpufreq_update_current_freq() cpufreq: Introduce cpufreq_start_governor() cpufreq: powernv: Add sysfs attributes to show throttle stats cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path cpufreq: acpi-cpufreq: Clean up hot plug notifier callback intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts cpufreq: Make cpufreq_quick_get() safe to call * pm-cpuidle: intel_idle: Support for Intel Xeon Phi Processor x200 Product Family intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled cpuidle: menu: Fall back to polling if next timer event is near cpuidle: menu: use high confidence factors only when considering polling | 24 March 2016, 23:57:22 UTC |
968ce1b | Guenter Roeck | 22 March 2016, 22:11:03 UTC | MAINTAINERS: Update mailing list and web page for hwmon subsystem The old web page for the hwmon subsystem is no longer operational, and the mailing list has become unreliable. Move both to kernel.org. Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 24 March 2016, 22:22:52 UTC |
e46b4e2 | Linus Torvalds | 24 March 2016, 17:52:25 UTC | Merge tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Nothing major this round. Mostly small clean ups and fixes. Some visible changes: - A new flag was added to distinguish traces done in NMI context. - Preempt tracer now shows functions where preemption is disabled but interrupts are still enabled. Other notes: - Updates were done to function tracing to allow better performance with perf. - Infrastructure code has been added to allow for a new histogram feature for recording live trace event histograms that can be configured by simple user commands. The feature itself was just finished, but needs a round in linux-next before being pulled. This only includes some infrastructure changes that will be needed" * tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (22 commits) tracing: Record and show NMI state tracing: Fix trace_printk() to print when not using bprintk() tracing: Remove redundant reset per-CPU buff in irqsoff tracer x86: ftrace: Fix the misleading comment for arch/x86/kernel/ftrace.c tracing: Fix crash from reading trace_pipe with sendfile tracing: Have preempt(irqs)off trace preempt disabled functions tracing: Fix return while holding a lock in register_tracer() ftrace: Use kasprintf() in ftrace_profile_tracefs() ftrace: Update dynamic ftrace calls only if necessary ftrace: Make ftrace_hash_rec_enable return update bool tracing: Fix typoes in code comment and printk in trace_nop.c tracing, writeback: Replace cgroup path to cgroup ino tracing: Use flags instead of bool in trigger structure tracing: Add an unreg_all() callback to trigger commands tracing: Add needs_rec flag to event triggers tracing: Add a per-event-trigger 'paused' field tracing: Add get_syscall_name() tracing: Add event record param to trigger_ops.func() tracing: Make event trigger functions available tracing: Make ftrace_event_field checking functions available ... | 24 March 2016, 17:52:25 UTC |
faea72d | Linus Torvalds | 24 March 2016, 17:45:59 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Fix a regression where bogus trip points on some Lenovo laptops start to screw up thermal control after commit 81ad4276b505 ("Thermal: initialize thermal zone device correctly"). On these Lenovo laptops, a bogus passive trip point is reported, which is 0 degree Celsius. Without commit 81ad4276b505, thermal zone fails to set cooling devices to proper cooling state, which is a bug. But with commit 81ad4276b505 applied, the processors are always throttled on these Lenovo laptops because the current temperature is always higher than the passive trip point. Fix things to ignore such bogus trip points. (Zhang Rui) - Introduce Mediatek thermal driver. (Sascha Hauer) - Introduce devm_ versions of OF thermal sensor register API. (Laxman Dewangan) - Changes in Kconfigs to allow compile test on UM arch. (Krzysztof Kozlowski) - Introduce Skylake support in intel_pch_thermal driver. (Srinivas Pandruvada) - Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits) Thermal: Ignore invalid trip points thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros thermal: intel_pch_thermal: Enable Skylake PCH thermal thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister} thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister} thermal: exynos: Defer probe if vtmu is present but not registered thermal: exynos: Use devm_regulator_get_optional() for vtmu thermal: exynos: List vtmu-supply as optional property in DT binding thermal: exynos: Print a message about exceeded number of supported trip-points thermal: exynos: Document number of supported trip-points thermal: exynos: Document compatible for Exynos5433 TMU thermal: mtk: allow compile testing on UM thermal: tegra_soctherm: fix sign bit of temperature thermal: Fix build error of missing devm_ioremap_resource on UM thermal: ti-soc-thermal: clean up the error handling a bit thermal: rcar: Use ARCH_RENESAS thermal: rcar_thermal: don't open code of_device_get_match_data() thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399 ... | 24 March 2016, 17:45:59 UTC |
5b1e167 | Linus Torvalds | 24 March 2016, 17:41:00 UTC | Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux Pull nfsd updates from Bruce Fields: "Various bugfixes, a RDMA update from Chuck Lever, and support for a new pnfs layout type from Christoph Hellwig. The new layout type is a variant of the block layout which uses SCSI features to offer improved fencing and device identification. (Also: note this pull request also includes the client side of SCSI layout, with Trond's permission.)" * tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux: sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race nfsd: recover: fix memory leak nfsd: fix deadlock secinfo+readdir compound nfsd4: resfh unused in nfsd4_secinfo svcrdma: Use new CQ API for RPC-over-RDMA server send CQs svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs svcrdma: Remove close_out exit path svcrdma: Hook up the logic to return ERR_CHUNK svcrdma: Use correct XID in error replies svcrdma: Make RDMA_ERROR messages work rpcrdma: Add RPCRDMA_HDRLEN_ERR svcrdma: svc_rdma_post_recv() should close connection on error svcrdma: Close connection when a send error occurs nfsd: Lower NFSv4.1 callback message size limit svcrdma: Do not send Write chunk XDR pad with inline content svcrdma: Do not write xdr_buf::tail in a Write chunk svcrdma: Find client-provided write and reply chunks once per reply nfsd: Update NFS server comments related to RDMA support nfsd: Fix a memory leak when meeting unsupported state_protect_how4 nfsd4: fix bad bounds checking | 24 March 2016, 17:41:00 UTC |
8b97be0 | Linus Torvalds | 24 March 2016, 17:36:16 UTC | Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some fixes that poped up due to the big staging tree merge, as well as the removal of a staging driver that now is covered by a "real" driver. All of these have been in linux-next for a few days with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: delete STE RMI4 hackish driver staging: android: ion_test: fix check of platform_device_register_simple() error code staging: wilc1000: fix a couple of memory leaks staging: fsl-mc: fix incorrect type passed to dev_err macros staging: fsl-mc: fix incorrect type passed to dev_dbg macros staging: wilc1000: fixed kernel panic when firmware is not started staging: comedi: ni_mio_common: fix the ni_write[blw]() functions staging: most: hdm-dim2: Remove possible dereference error staging: lustre: checking for NULL instead of IS_ERR staging: lustre: really make lustre dependent on LNet staging: refresh TODO for rtl8712 staging: refresh TODO for rtl8723au | 24 March 2016, 17:36:16 UTC |
44d1b6d | Linus Torvalds | 24 March 2016, 17:32:42 UTC | Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix to the pistachio clocksource driver using the proper signedness in the error print format" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/pistachio: Correct output format of PTR_ERR() | 24 March 2016, 17:32:42 UTC |
0f0fbec | Linus Torvalds | 24 March 2016, 17:29:44 UTC | Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A small set of fixes for the usual ARM/SOC irqchip drivers - A set of fixes for mbigen to handle multiple devices in a hardware module proper - A cleanup for the mbigen config option which was pointlessly user configurable. - A cleanup for tegra replacing open coded functionality by the proper core function The config cleanup touches arch/arm64/Kconfig.platforms to select the irq chip for the related platform" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option ARM64: Kconfig: Select mbigen interrupt controller on Hisilicon platform irqchip/mbigen: Handle multiple device nodes in a mbigen module irqchip/mbigen: Adjust DT bindings to handle multiple devices in a module irqchip/tegra: Switch to use irq_domain_free_irqs_common | 24 March 2016, 17:29:44 UTC |
3fa2fe2 | Linus Torvalds | 24 March 2016, 17:02:14 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This tree contains various perf fixes on the kernel side, plus three hw/event-enablement late additions: - Intel Memory Bandwidth Monitoring events and handling - the AMD Accumulated Power Mechanism reporting facility - more IOMMU events ... and a final round of perf tooling updates/fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) perf llvm: Use strerror_r instead of the thread unsafe strerror one perf llvm: Use realpath to canonicalize paths perf tools: Unexport some methods unused outside strbuf.c perf probe: No need to use formatting strbuf method perf help: Use asprintf instead of adhoc equivalents perf tools: Remove unused perf_pathdup, xstrdup functions perf tools: Do not include stringify.h from the kernel sources tools include: Copy linux/stringify.h from the kernel tools lib traceevent: Remove redundant CPU output perf tools: Remove needless 'extern' from function prototypes perf tools: Simplify die() mechanism perf tools: Remove unused DIE_IF macro perf script: Remove lots of unused arguments perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve perf machine: Rename perf_event__preprocess_sample to machine__resolve perf tools: Add cpumode to struct perf_sample perf tests: Forward the perf_sample in the dwarf unwind test perf tools: Remove misplaced __maybe_unused perf list: Fix documentation of :ppp perf bench numa: Fix assertion for nodes bitfield ... | 24 March 2016, 17:02:14 UTC |
6fe35ab | Arnd Bergmann | 24 March 2016, 16:50:24 UTC | Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt2 Merge "First fixes batch for AT91 on 4.6 - DT only fixes" from Nicolas Ferre: - prevent the boards from having glitches when inserting/removing SD card on sama5d3/d4 Xplained. The regulators should be kept on. * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator ARM: dts: at91: sama5d2 Xplained: add leds node ARM: dts: at91: sama5d2 Xplained: add user push button ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes ARM: dts: at91: sama5d2: add dma properties to UART nodes ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node | 24 March 2016, 16:51:11 UTC |
d88f48e | Linus Torvalds | 24 March 2016, 16:47:32 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix hotplug bugs - fix irq live lock - fix various topology handling bugs - fix APIC ACK ordering - fix PV iopl handling - fix speling - fix/tweak memcpy_mcsafe() return value - fix fbcon bug - remove stray prototypes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Remove unused native_read_tscp() x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck x86/oprofile/nmi: Add missing hotplug FROZEN handling x86/hpet: Use proper mask to modify hotplug action x86/apic/uv: Fix the hotplug notifier x86/apb/timer: Use proper mask to modify hotplug action x86/topology: Use total_cpus not nr_cpu_ids for logical packages x86/topology: Fix Intel HT disable x86/topology: Fix logical package mapping x86/irq: Cure live lock in fixup_irqs() x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known() x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt() x86/iopl: Fix iopl capability check on Xen PV x86/iopl/64: Properly context-switch IOPL on Xen PV selftests/x86: Add an iopl test x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe() x86/video: Don't assume all FB devices are PCI devices arch/x86/irq: Purge useless handler declarations from hw_irq.h x86: Fix misspellings in comments | 24 March 2016, 16:47:32 UTC |
8cad489 | Yoshinori Sato | 21 November 2015, 12:42:58 UTC | h8300: switch EARLYCON earlyprintk is architecture specific option. earlycon is generic and small footprint. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> | 24 March 2016, 16:45:19 UTC |
d858161 | Geert Uytterhoeven | 29 January 2016, 09:36:25 UTC | h8300: dts: Rename the serial port clock to fck The clock is really the device functional clock, not the interface clock. Rename it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> | 24 March 2016, 16:45:19 UTC |
be53f58 | Linus Torvalds | 24 March 2016, 16:42:50 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: a cgroup fix, a fair-scheduler migration accounting fix, a cputime fix and two cpuacct cleanups" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpuacct: Simplify the cpuacct code sched/cpuacct: Rename parameter in cpuusage_write() for readability sched/fair: Add comments to explain select_idle_sibling() sched/fair: Fix fairness issue on migration sched/cgroup: Fix/cleanup cgroup teardown/init sched/cputime: Fix steal time accounting vs. CPU hotplug | 24 March 2016, 16:42:50 UTC |
19d6f04 | Linus Torvalds | 24 March 2016, 16:36:18 UTC | Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Documentation updates and a bitops ordering fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bitops: Do not default to __clear_bit() for __clear_bit_unlock() documentation: Clarify compiler store-fusion example documentation: Transitivity is not cumulativity documentation: Add alternative release-acquire outcome documentation: Distinguish between local and global transitivity documentation: Subsequent writes ordered by rcu_dereference() documentation: Remove obsolete reference to RCU-protected indexes documentation: Fix memory-barriers.txt section references documentation: Fix control dependency and identical stores | 24 March 2016, 16:36:18 UTC |
691b1e2 | Mark Rutland | 22 March 2016, 10:11:28 UTC | arm64: mm: allow preemption in copy_to_user_page Currently we disable preemption in copy_to_user_page; a behaviour that we inherited from the 32-bit arm code. This was necessary for older cores without broadcast data cache maintenance, and ensured that cache lines were dirtied and cleaned by the same CPU. On these systems dirty cache line migration was not possible, so this was sufficient to guarantee coherency. On contemporary systems, cache coherence protocols permit (dirty) cache lines to migrate between CPUs as a result of speculation, prefetching, and other behaviours. To account for this, in ARMv8 data cache maintenance operations are broadcast and affect all data caches in the domain associated with the VA (i.e. ISH for kernel and user mappings). In __switch_to we ensure that tasks can be safely migrated in the middle of a maintenance sequence, using a dsb(ish) to ensure prior explicit memory accesses are observed and cache maintenance operations are completed before a task can be run on another CPU. Given the above, it is not necessary to disable preemption in copy_to_user_page. This patch removes the preempt_{disable,enable} calls, permitting preemption. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 24 March 2016, 16:32:54 UTC |
c661cb1 | Mark Rutland | 22 March 2016, 10:11:45 UTC | arm64: consistently use p?d_set_huge Commit 324420bf91f60582 ("arm64: add support for ioremap() block mappings") added new p?d_set_huge functions which do the hard work to generate and set a correct block entry. These differ from open-coded huge page creation in the early page table code by explicitly setting the P?D_TYPE_SECT bits (which are implicitly retained by mk_sect_prot() for any valid prot), but are otherwise identical (and cannot fail on arm64). For simplicity and consistency, make use of these in the initial page table creation code. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 24 March 2016, 16:32:29 UTC |
d5e5743 | Ard Biesheuvel | 21 March 2016, 17:35:11 UTC | arm64: kaslr: use callee saved register to preserve SCTLR across C call The KASLR code incorrectly expects the contents of x18 to be preserved across a call into C code, and uses it to stash the contents of SCTLR_EL1 before enabling the MMU. If the MMU needs to be disabled again to create the randomized kernel mapping, x18 is written back to SCTLR_EL1, which is likely to crash the system if x18 has been clobbered by kasan_early_init() or kaslr_early_init(). So use x22 instead, which is not in use so far in head.S Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> | 24 March 2016, 16:19:24 UTC |
f70ce48 | Rafael J. Wysocki | 24 March 2016, 12:52:09 UTC | Merge branch 'cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux into pm-cpuidle Pull intel_idle patches for 4.6 from Len Brown. * 'cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: Support for Intel Xeon Phi Processor x200 Product Family intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled | 24 March 2016, 12:52:09 UTC |
05f5ece | Ingo Molnar | 24 March 2016, 07:30:25 UTC | Merge tag 'perf-core-for-mingo-20160323' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes: User visible fixes: - Fix documentation of :ppp modifier in 'perf list' (Andi Kleen) - Fix silly nodes bitfield bits/bytes length assertion in 'perf bench numa' (Jakub Jelen) - Remove redundant CPU output in libtraceevent (Steven Rostedt) - Remove 'core_id' check in topology 'perf test' (Sukadev Bhattiprolu) Infrastructure changes/fixes: - Record text offset in dso to calculate objdump address, to use with modules in addition to vDSO symbol address calculations (Wang Nan) - Move utilities.mak from perf to tools/scripts/ (Arnaldo Carvalho de Melo) - Add cpumode to the perf_sample struct, this way we don't need to pass the union event to the machine and thread resolving routines, shortening function signatures and allowing the future introduction of a way to use tracepoint events instead of the unavailable HW cycles counter on powerpc guests in perf kvm by just hooking on perf_evsel__parse_sample, at the end (Arnaldo Carvalho de Melo) - Remove/unexport die() related infrastructure, that at some point will finally be removed (Arnaldo Carvalho de Melo) - Adopt linux/stringify.h from the kernel sources, not to touch this kernel header from tools/ (Arnaldo Carvalho de Melo) - Stop using strbuf for things we can instead trivially use libc's asprintf() (Arnaldo Carvalho de Melo) - Ditch tools/lib/util/abspath.c, its only exported function was used at just one place and can be replaced by libc's realpath() (Arnaldo Carvalho de Melo) - Use strerror_r() in the llvm infrastructure, tread safe, its what is used elsewhere in tools/perf/ (Arnaldo Carvalho de Melo) Cleanups: - Removed misplaced or needless __maybe_unused/export (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 24 March 2016, 07:30:25 UTC |
aca04ce | Linus Torvalds | 24 March 2016, 06:25:14 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking bugfixes from David Miller: "Several bug fixes rolling in, some for changes introduced in this merge window, and some for problems that have existed for some time: 1) Fix prepare_to_wait() handling in AF_VSOCK, from Claudio Imbrenda. 2) The new DST_CACHE should be a silent config option, from Dave Jones. 3) inet_current_timestamp() unintentionally truncates timestamps to 16-bit, from Deepa Dinamani. 4) Missing reference to netns in ppp, from Guillaume Nault. 5) Free memory reference in hv_netvsc driver, from Haiyang Zhang. 6) Missing kernel doc documentation for function arguments in various spots around the networking, from Luis de Bethencourt. 7) UDP stopped receiving broadcast packets properly, due to overzealous multicast checks, fix from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) net: ping: make ping_v6_sendmsg static hv_netvsc: Fix the order of num_sc_offered decrement net: Fix typos and whitespace. hv_netvsc: Fix the array sizes to be max supported channels hv_netvsc: Fix accessing freed memory in netvsc_change_mtu() ppp: take reference on channels netns net: Reset encap_level to avoid resetting features on inner IP headers net: mediatek: fix checking for NULL instead of IS_ERR() in .probe net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY at803x: fix reset handling AF_VSOCK: Shrink the area influenced by prepare_to_wait Revert "vsock: Fix blocking ops call in prepare_to_wait" macb: fix PHY reset ipv4: initialize flowi4_flags before calling fib_lookup() fsl/fman: Workaround for Errata A-007273 ipv4: fix broadcast packets reception net: hns: bug fix about the overflow of mss net: hns: adds limitation for debug port mtu net: hns: fix the bug about mtu setting net: hns: fixes a bug of RSS ... | 24 March 2016, 06:25:14 UTC |
6579a02 | Haishuang Yan | 23 March 2016, 09:59:51 UTC | net: ping: make ping_v6_sendmsg static As ping_v6_sendmsg is used only in this file, making it static The body of "pingv6_prot" and "pingv6_protosw" were moved at the middle of the file, to avoid having to declare some static prototypes. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 March 2016, 02:09:58 UTC |
3f73513 | Haiyang Zhang | 23 March 2016, 21:54:48 UTC | hv_netvsc: Fix the order of num_sc_offered decrement Reorder the code in netvsc_sc_open(), so num_sc_offered is only decremented after vmbus_open() is called. This avoid pontential race of removing device before all channels are setup. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 March 2016, 01:51:08 UTC |
5a010c7 | Linus Torvalds | 24 March 2016, 00:20:59 UTC | Merge tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Significant refactoring of Dell laptop drivers, modularizing the smbios code. Multiple new platforms added for ideapad, asus, dell, and alienware using existing quirks. A few fixes and cleanups. hp-wmi: - Remove GPS rfkill support via pre-2009 interface - fix unregister order in hp_wmi_rfkill_setup() once again ideapad-laptop: - Add ideapad Y700 (15) to the no_hw_rfkill DMI list fujitsu-laptop: - Support radio toggle button intel-hid: - allocate correct amount of memory for private struct platform/x86: - Make intel_scu_ipc explicitly non-modular intel_pmc_ipc: - Avoid pending IPC1 command during legacy suspend - Fix GCR register base address and length asus-nb-wmi: - add wapf=4 quirk for ASUS X75VD intel_telemetry_pltdrv: - Change verbosity control bits dell-rbtn: - Add a comment about the XPS 13 9350 dell-wmi, dell-laptop: - depends DMI dell-wmi: - support Dell Inspiron M5110 - properly process Dell Instant Launch hotkey - enable receiving WMI events on Dell Vostro V131 - Support new hotkeys on the XPS 13 9350 (Skylake) - Clean up hotkey table size check - Stop storing pointers to DMI tables dell-laptop: - move dell_smi_error() to dell-smbios - use dell_smbios_find_token() instead of find_token_location() - use dell_smbios_find_token() instead of find_token_id() - extract SMBIOS-related code to a separate module dell-smbios: - rename dell_smi_error() to dell_smbios_error() - make da_tokens static - remove find_token_{id,location}() - implement new function for finding DMI table 0xDA tokens - make the SMBIOS buffer static - return the SMBIOS buffer from dell_smbios_get_buffer() - don't return an SMBIOS buffer from dell_smbios_send_request() - don't pass an SMBIOS buffer to dell_smbios_send_request() - rename dell_send_request() to dell_smbios_send_request() - rename release_buffer() to dell_smbios_release_buffer() - rename clear_buffer() to dell_smbios_clear_buffer() - rename get_buffer() to dell_smbios_get_buffer() dell-led: - use dell_smbios_send_request() for performing SMBIOS calls - use dell_smbios_find_token() for finding mic DMI tokens toshiba_acpi: - Add a module parameter to disable hotkeys registration - Add sysfs entries for the Cooling Method feature - Add support for cooling method feature Documentation/ABI: - Update sysfs-driver-toshiba_acpi file thinkpad_acpi: - Remove ambiguous logging for "Unsupported brightness interface" alienware-wmi: - whitespace improvements - Add support for two new systems: ASM200 and ASM201. - Add support for deep sleep control. - Add initial support for alienware graphics amplifier. - Add support for new platform: X51-R3 - Clean up whitespace for ASM100 platform" * tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits) hp-wmi: Remove GPS rfkill support via pre-2009 interface hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again dell-wmi: support Dell Inspiron M5110 dell-wmi: properly process Dell Instant Launch hotkey dell-wmi: enable receiving WMI events on Dell Vostro V131 dell-smbios: rename dell_smi_error() to dell_smbios_error() dell-laptop: move dell_smi_error() to dell-smbios ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list fujitsu-laptop: Support radio toggle button intel-hid: allocate correct amount of memory for private struct platform/x86: Make intel_scu_ipc explicitly non-modular intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend intel_pmc_ipc: Fix GCR register base address and length asus-nb-wmi: add wapf=4 quirk for ASUS X75VD intel_telemetry_pltdrv: Change verbosity control bits dell-rbtn: Add a comment about the XPS 13 9350 dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake) dell-wmi: Clean up hotkey table size check dell-wmi, dell-laptop: depends DMI dell-wmi: Stop storing pointers to DMI tables ... | 24 March 2016, 00:20:59 UTC |
b615d3d | Linus Torvalds | 24 March 2016, 00:14:09 UTC | Merge tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "No new drivers this time around, but a handful of cleanups and fixes" * tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: omap-dmtimer: Add debug message for effective period and duty cycle pwm: omap-dmtimer: Round load and match values rather than truncate pwm: omap-dmtimer: Add sanity checking for load and match values pwm: omap-dmtimer: Fix inaccurate period and duty cycle calculations pwm: brcmstb: Fix check of devm_ioremap_resource() return code pwm: rcar: Depend on ARCH_RENESAS instead of ARCH_SHMOBILE pwm: lpc18xx-sct: Test clock rate to avoid division by 0 pwm: img: Test clock rate to avoid division by 0 | 24 March 2016, 00:14:09 UTC |
ed7d6bc | Linus Torvalds | 23 March 2016, 22:57:39 UTC | Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull more SCSI target updates from Nicholas Bellinger: "This series contains cxgb4 driver prerequisites for supporting iscsi segmentation offload (ISO), that will be utilized for a number of future v4.7 developments in iscsi-target for supporting generic hw offloads" * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: cxgb4: update Kconfig and Makefile cxgb4: add iSCSI DDP page pod manager cxgb4, iw_cxgb4: move delayed ack macro definitions cxgb4: move VLAN_NONE macro definition cxgb4: update struct cxgb4_lld_info definition cxgb4: add definitions for iSCSI target ULD cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions cxgb4, iw_cxgb4: move definitions to common header file cxgb4: large receive offload support cxgb4: allocate resources for CXGB4_ULD_ISCSIT cxgb4: add new ULD type CXGB4_ULD_ISCSIT | 23 March 2016, 22:57:39 UTC |
17efca9 | Dave Airlie | 23 March 2016, 22:41:59 UTC | Merge tag 'topic/drm-misc-2016-03-22' of git://anongit.freedesktop.org/drm-intel into drm-next Bunch of small fixupes all over. Plus a dma-buf patch that Sumit asked me to cherry-pick since that's the only one he had in his tree. There's a sparse issue outstanding in the color mgr stuff, but Lionel is still working on something that actually appeases sparse. * tag 'topic/drm-misc-2016-03-22' of git://anongit.freedesktop.org/drm-intel: dma-buf/fence: fix fence_is_later v2 dma-buf: Update docs for SYNC ioctl drm: remove excess description dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access() drm/atmel-hlcdc: use helper to get crtc state drm/atomic: use helper to get crtc state | 23 March 2016, 22:41:59 UTC |
f447671 | David Wu | 15 March 2016, 18:45:26 UTC | PM / AVS: rockchip-io: add io selectors and supplies for rk3399 This adds the necessary data for handling io voltage domains on the rk3399. As interesting tidbit, the rk3399 contains two separate iodomain areas. One in the regular General Register Files (GRF) and one in PMUGRF in the pmu power domain. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 23 March 2016, 21:10:15 UTC |
7626714 | Arnaldo Carvalho de Melo | 23 March 2016, 20:42:21 UTC | perf llvm: Use strerror_r instead of the thread unsafe strerror one Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5njrq9dltckgm624omw9ljgu@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 20:42:21 UTC |
7847826 | Arnaldo Carvalho de Melo | 23 March 2016, 20:34:29 UTC | perf llvm: Use realpath to canonicalize paths To kill the last user of make_nonrelative_path(), that gets ditched, one more panicking function killed. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-3hu56rvyh4q5gxogovb6ko8a@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 20:39:19 UTC |
281baf7 | Dasaratharaman Chandramouli | 05 September 2014, 00:22:54 UTC | intel_idle: Support for Intel Xeon Phi Processor x200 Product Family Enables "Intel(R) Xeon Phi(TM) Processor x200 Product Family" support, formerly code-named KNL. It is based on modified Intel Atom Silvermont microarchitecture. Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> [micah.barany@intel.com: adjusted values of residency and latency] Signed-off-by: Micah Barany <micah.barany@intel.com> [hubert.chrzaniuk@intel.com: removed deprecated CPUIDLE_FLAG_TIME_VALID flag] Signed-off-by: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com> Signed-off-by: Pawel Karczewski <pawel.karczewski@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 23 March 2016, 20:19:38 UTC |
d70e28f | Len Brown | 13 March 2016, 05:33:48 UTC | intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled Some SKL-H configurations require "intel_idle.max_cstate=7" to boot. While that is an effective workaround, it disables C10. This patch detects the problematic configuration, and disables C8 and C9, keeping C10 enabled. Note that enabling SGX in BIOS SETUP can also prevent this issue, if the system BIOS provides that option. https://bugzilla.kernel.org/show_bug.cgi?id=109081 "Freezes with Intel i7 6700HQ (Skylake), unless intel_idle.max_cstate=7" Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org | 23 March 2016, 20:19:29 UTC |
0741208 | Arnaldo Carvalho de Melo | 23 March 2016, 19:56:56 UTC | perf tools: Unexport some methods unused outside strbuf.c Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-nq1wvtky4mpu0nupjyar7sbw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 20:09:53 UTC |
ac503e4 | Benjamin Coddington | 22 March 2016, 14:28:36 UTC | nfsd: use short read as well as i_size to set eof Use the result of a local read to determine when to set the eof flag. This allows us to return the location of the end of the file atomically at the time of the read. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> [bfields: add some documentation] Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 23 March 2016, 20:02:39 UTC |
88fd633 | Arnaldo Carvalho de Melo | 23 March 2016, 19:44:49 UTC | perf probe: No need to use formatting strbuf method We have addch() for chars, add() for fixed size data, and addstr() for variable length strings, use them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0ap02fn2xtvpduj2j6b2o1j4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 19:53:05 UTC |
a610f5c | Arnaldo Carvalho de Melo | 23 March 2016, 18:44:09 UTC | perf help: Use asprintf instead of adhoc equivalents That doesn't chekcs malloc return and that, when using strbuf, if it can't grow, just explodes away via die(). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-vr8qsjbwub7e892hpa9msz95@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 19:36:07 UTC |
5e82b4b | Bjorn Helgaas | 23 March 2016, 18:47:23 UTC | net: Fix typos and whitespace. Fix typos. Capitalize CPU, NAPI, RCU consistently. Align structure indentation. No functional change intended; only comment and whitespace changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 18:52:03 UTC |
9efc2f7 | Haiyang Zhang | 23 March 2016, 16:43:10 UTC | hv_netvsc: Fix the array sizes to be max supported channels The VRSS_CHANNEL_MAX is the max number of channels supported by Hyper-V hosts. We use it for the related array sizes instead of using NR_CPUS, which may be set to several thousands. This patch reduces possible memory allocation failures. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 18:38:55 UTC |
d212b46 | Haiyang Zhang | 23 March 2016, 16:43:09 UTC | hv_netvsc: Fix accessing freed memory in netvsc_change_mtu() struct netvsc_device is freed in rndis_filter_device_remove(). So we save the nvdev->num_chn into a temp variable for later usage. (Please also include this patch into stable branch.) Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 18:38:55 UTC |
1f461dc | Guillaume Nault | 23 March 2016, 15:38:55 UTC | ppp: take reference on channels netns Let channels hold a reference on their network namespace. Some channel types, like ppp_async and ppp_synctty, can have their userspace controller running in a different namespace. Therefore they can't rely on them to preclude their netns from being removed from under them. ================================================================== BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at addr ffff880064e217e0 Read of size 8 by task syz-executor/11581 ============================================================================= BUG net_namespace (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906 [< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440 [< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469 [< inline >] slab_alloc_node kernel/mm/slub.c:2532 [< inline >] slab_alloc kernel/mm/slub.c:2574 [< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579 [< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597 [< inline >] net_alloc kernel/net/core/net_namespace.c:325 [< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360 [< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95 [< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150 [< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451 [< inline >] copy_process kernel/kernel/fork.c:1274 [< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723 [< inline >] SYSC_clone kernel/kernel/fork.c:1832 [< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826 [< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185 INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631 [< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650 [< inline >] slab_free kernel/mm/slub.c:2805 [< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814 [< inline >] net_free kernel/net/core/net_namespace.c:341 [< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348 [< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448 [< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036 [< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170 [< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303 [< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468 INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000 flags=0x5fffc0000004080 INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200 CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000 Call Trace: [< inline >] __dump_stack kernel/lib/dump_stack.c:15 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661 [< inline >] print_address_description kernel/mm/kasan/report.c:138 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236 [< inline >] kasan_report kernel/mm/kasan/report.c:259 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280 [< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115 [< inline >] exit_task_work kernel/include/linux/task_work.h:21 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307 [< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692 [< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678 [< inline >] ? context_switch kernel/kernel/sched/core.c:2807 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247 [< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281 Memory state around the buggy address: ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 273ec51dd7ce ("net: ppp_generic - introduce net-namespace functionality v2") Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 18:35:31 UTC |
cf47a8a | Arnaldo Carvalho de Melo | 23 March 2016, 18:25:02 UTC | perf tools: Remove unused perf_pathdup, xstrdup functions Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-s87zi5d03m6rz622y1z6rlsa@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 18:27:33 UTC |
531d241 | Arnaldo Carvalho de Melo | 23 March 2016, 18:16:55 UTC | perf tools: Do not include stringify.h from the kernel sources Use instead the copy just made to tools/include/linux/. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-q736w12nwy98x5ox2hamp5ow@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 18:21:15 UTC |
5197f34 | Alexander Duyck | 22 March 2016, 23:18:07 UTC | net: Reset encap_level to avoid resetting features on inner IP headers This patch corrects an oversight in which we were allowing the encap_level value to pass from the outer headers to the inner headers. As a result we were incorrectly identifying UDP or GRE tunnels as also making use of ipip or sit when the second header actually represented a tunnel encapsulated in either a UDP or GRE tunnel which already had the features masked. Fixes: 76443456227097179c1482 ("net: Move GSO csum into SKB_GSO_CB") Reported-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 18:19:08 UTC |
737ef7d | Arnaldo Carvalho de Melo | 23 March 2016, 18:14:27 UTC | tools include: Copy linux/stringify.h from the kernel There is code in tools/ that is directly including this file from the kernel, and this is verboten for a while, copy it so that the next csets can fix this situation. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-e0r3nks2uai020ndghvxv5qw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 18:14:27 UTC |
4f3c887 | Steven Rostedt | 23 March 2016, 14:16:28 UTC | tools lib traceevent: Remove redundant CPU output Commit a6745330789f ("tools lib traceevent: Split pevent_print_event() into specific functionality functions") broke apart the function pevent_print_event() into three functions. The first function prints the comm, pid and CPU, the second prints the timestamp. But that commit added the printing of the CPU in the timestamp function, which now causes pevent_print_event() to duplicate the CPU output. Remove the redundant printing of the record's CPU from the timestamp function. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a6745330789f ("tools lib traceevent: Split pevent_print_event() into specific functionality functions") Link: http://lkml.kernel.org/r/20160323101628.459375d2@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 18:08:12 UTC |
3938bad | Arnaldo Carvalho de Melo | 23 March 2016, 18:06:35 UTC | perf tools: Remove needless 'extern' from function prototypes Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-w246stf7ponfamclsai6b9zo@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 23 March 2016, 18:06:35 UTC |
621e49f | Vladimir Zapolskiy | 22 March 2016, 23:06:04 UTC | net: mediatek: fix checking for NULL instead of IS_ERR() in .probe devm_ioremap_resource() returns ERR_PTR() value on error, it never returns NULL, fix it and propagate the returned error upwards. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 17:49:13 UTC |
9eb13f6 | Sebastian Frias | 23 March 2016, 10:49:09 UTC | net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY This removes the dependency on GPIOLIB for non faulty PHYs. Indeed, without this patch, if GPIOLIB is not selected devm_gpiod_get_optional() will return -ENOSYS and the driver probe call will fail, regardless of the actual PHY hardware. Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035), only AT8030 presents the issues that commit 13a56b449325 ("net: phy: at803x: Add support for hardware reset") attempts to work-around by using a 'reset' GPIO line. Hence, only AT8030 should depend on GPIOLIB operating properly. Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset") Signed-off-by: Sebastian Frias <sf84@laposte.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 17:39:25 UTC |
d57019d | Sergei Shtylyov | 22 March 2016, 21:44:40 UTC | at803x: fix reset handling The driver of course "knows" that the chip's reset signal is active low, so it drives the GPIO to 0 to reset the PHY and to 1 otherwise; however all this will only work iff the GPIO is specified as active-high in the device tree! I think both the driver and the device trees (if there are any -- I was unable to find them) need to be fixed in this case... Fixes: 13a56b449325 ("net: phy: at803x: Add support for hardware reset") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 23 March 2016, 17:38:40 UTC |
fffcad8 | Maciej S. Szmigiero | 06 March 2016, 22:40:19 UTC | hp-wmi: Remove GPS rfkill support via pre-2009 interface GPS rfkill support via pre-2009 WMI interface uses hp_wmi_get_sw_state() and hp_wmi_get_hw_state() to query its current hard and soft block state, respectively. In hp_wmi_get_sw_state() a mask is calculated which bit should be checked in an int value returned by firmware to get current block state: 0x200 << (r * 8) which with r being 3 for GPS results in overflow and mask of zero. The same goes for hp_wmi_get_hw_state(). This effectively means that GPS rfkill on this WMI interface is considered always both hard and soft blocked. Unfortunately, later when rfkill subsystem calls hp_wmi_set_block() to sync this block to hardware firmware at least on my old nc6400 gets confused and sets both hard and soft blocks on WiFi and BT. This happens for example on hp-wmi module load. Since due to overflow described above it is dubious that this ever worked correctly and HP laptops with modems having GPS support seem to all have been released well past year 2009 let's just remove GPS rfkill support via pre-2009 WMI interface. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:51 UTC |
c7805e5 | Maciej S. Szmigiero | 06 March 2016, 22:38:36 UTC | hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again rfkill registration order in hp_wmi_rfkill_setup() is: 1) WiFi, 2) BT, 3) WWAN, 5) GPS. Unregistration when cleaning up on error return should happen in reverse order. This means that: If BT rfkill fails to be allocated we possibly need to first unregister WiFi rfkill before destroying it. The same goes with (WWAN, BT) and (GPS, WWAN) pairs. Also, if WWAN rfkill fails to register we need to (possibly) unregister BT not the GPS one. And if GPS rfkill fails to register we need to unregister WWAN not the BT one. We never need to unregister GPS rfkill here since if GPS rfkill registration succeeds this function returns without error so no cleanup is necessary. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:51 UTC |
aaf3a5e | Michał Kępień | 04 March 2016, 13:09:10 UTC | dell-wmi: support Dell Inspiron M5110 Similarly to Dell Vostro V131, Dell Inspiron M5110 also requires an SMBIOS request to be issued in order for WMI events to be generated and does not raise an i8042 interrupt when the Dell Instant Launch hotkey is pressed. However, the event code for that hotkey on this machine is 0xe029, so add it to the legacy keymap. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Tested-by: Darek Stojaczyk <darek.stojaczyk@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:51 UTC |
13f5059 | Michał Kępień | 04 March 2016, 13:09:09 UTC | dell-wmi: properly process Dell Instant Launch hotkey On models on which an SMBIOS request needs to be issued in order for WMI events to be generated, pressing the Dell Instant Launch hotkey does not raise an i8042 interrupt - only a WMI event is generated (0xe025 on Dell Vostro V131). As that WMI event is the only way the kernel will be notified about pressing the Dell Instant Launch hotkey on such machines, the relevant keymap entry has to be changed to a KE_KEY one. However, the same WMI event should still be ignored on machines which do not require an SMBIOS request for enabling WMI, so filter it conditionally in dell_wmi_process_key(). Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:50 UTC |
e09c4d5 | Michał Kępień | 04 March 2016, 13:09:08 UTC | dell-wmi: enable receiving WMI events on Dell Vostro V131 On some laptop models (e.g. Dell Vostro V131), WMI events are not generated until a specific SMBIOS request is issued to register an event listener [1]. As there seems to be no ACPI method or SMBIOS request to determine without possible side effects whether a given machine needs to issue this SMBIOS request in order to receive WMI events, DMI matching is used to whitelist the models which need it. [1] https://lists.us.dell.com/pipermail/libsmbios-devel/2015-July/000612.html Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:50 UTC |
0db2180 | Michał Kępień | 04 March 2016, 13:09:07 UTC | dell-smbios: rename dell_smi_error() to dell_smbios_error() As dell_smi_error() is exported by dell-smbios, its prefix should be consistent with other exported symbols, so change function name to dell_smbios_error(). Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:49 UTC |
e8edf53 | Michał Kępień | 04 March 2016, 13:09:06 UTC | dell-laptop: move dell_smi_error() to dell-smbios The dell_smi_error() method could be used by modules other than dell-laptop for convenient translation of SMBIOS request errors into errno values. Thus, move it to dell-smbios. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:49 UTC |
4db9675 | John Dahlstrom | 27 February 2016, 06:09:58 UTC | ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list Some Lenovo ideapad models lack a physical rfkill switch. On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK, ideapad-laptop would wrongly report all radios as blocked by hardware which caused wireless network connections to fail. Add these models without an rfkill switch to the no_hw_rfkill list. Signed-off-by: John Dahlstrom <jodarom@sdf.org> Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dab: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked Cc: <stable@vger.kernel.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:49 UTC |
b5df36c | Michał Kępień | 24 February 2016, 13:23:32 UTC | fujitsu-laptop: Support radio toggle button Lifebook E734/E744/E754 has a radio toggle button which uses code 0x420. Map it to KEY_RFKILL. Signed-off-by: Michał Kępień <kernel@kempniu.pl> Acked-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:48 UTC |
e8b69a5 | Wolfram Sang | 21 February 2016, 14:22:27 UTC | intel-hid: allocate correct amount of memory for private struct We want the size of the struct, not of a pointer to it. To be future proof, just dereference the pointer to get the desired type. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:48 UTC |
f52ab44 | Paul Gortmaker | 14 February 2016, 20:00:52 UTC | platform/x86: Make intel_scu_ipc explicitly non-modular The Kconfig currently controlling compilation of this code is: drivers/platform/x86/Kconfig:config INTEL_SCU_IPC drivers/platform/x86/Kconfig: bool "Intel SCU IPC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_pci_driver() uses the same init level priority as builtin_pci_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:47 UTC |
1f1ae99 | Qipeng Zha | 17 February 2016, 18:03:38 UTC | intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend During legacy suspend flow, IPC1 commands are being requested from opregion driver. But the PMC_IPC1 command will timeout as example: [ 281.444600] ipc_debug##: ipc_send_command: cmd=0x201ff, [ 281.444648] wbuf[0]=0x4ea6 [ 281.444668] wbuf[1]=0x0 [ 281.444674] wbuf[2]=0x0 [ 281.444676] wbuf[3]=0x0 [ 284.446467] pmc-ipc-plat INT34D2:00: IPC timed out, TS=0x4, CMD=0x200ff This is because before the opregion driver could send IPC1 commands, the PMC_IPC irq is already suspended. Which makes the IPC command to timeout. Solution: register pmc_ipc irq as IRQF_NO_SUSPEND Signed-off-by: Ananth Krishna R <ananth.krishna.r@intel.com> Signed-off-by: Bharath K Veera <bharath.k.veera@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:47 UTC |
1a2f25d | Qipeng Zha | 17 February 2016, 18:03:37 UTC | intel_pmc_ipc: Fix GCR register base address and length GCR register (pmc_cfg register) is at offset 0x1008, and remapping of 0x4 bytes is enough. Signed-off-by: Francois-Nicolas Muller <francois-nicolas.muller@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:47 UTC |
4670768 | Oleksandr Natalenko | 17 February 2016, 11:35:46 UTC | asus-nb-wmi: add wapf=4 quirk for ASUS X75VD Wi-Fi on ASUS X75VD laptop does not work unless asus_nb_wmi module is loaded with wapf=4 option. Add quirk for this. Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Darren Hart <dvhart@linux.intel.com> | 23 March 2016, 17:05:46 UTC |