Revision b4cd08aa1f53c831e67dc5c6bc9f9acff27abcba authored by Wolfram Sang on 16 December 2015, 19:05:18 UTC, committed by Wolfram Sang on 19 December 2015, 11:00:37 UTC
When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
1 parent e79e72c
rio-scan.c
/*
* RapidIO enumeration and discovery support
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
* Copyright 2009 Integrated Device Technology, Inc.
* Alex Bounine <alexandre.bounine@idt.com>
* - Added Port-Write/Error Management initialization and handling
*
* Copyright 2009 Sysgo AG
* Thomas Moll <thomas.moll@sysgo.com>
* - Added Input- Output- enable functionality, to allow full communication
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/rio_ids.h>
#include <linux/rio_regs.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/jiffies.h>
#include <linux/slab.h>
#include "rio.h"
static void rio_init_em(struct rio_dev *rdev);
static int next_destid = 0;
static int next_comptag = 1;
static int rio_mport_phys_table[] = {
RIO_EFB_PAR_EP_ID,
RIO_EFB_PAR_EP_REC_ID,
RIO_EFB_SER_EP_ID,
RIO_EFB_SER_EP_REC_ID,
-1,
};
/**
* rio_destid_alloc - Allocate next available destID for given network
* @net: RIO network
*
* Returns next available device destination ID for the specified RIO network.
* Marks allocated ID as one in use.
* Returns RIO_INVALID_DESTID if new destID is not available.
*/
static u16 rio_destid_alloc(struct rio_net *net)
{
int destid;
struct rio_id_table *idtab = &net->destid_table;
spin_lock(&idtab->lock);
destid = find_first_zero_bit(idtab->table, idtab->max);
if (destid < idtab->max) {
set_bit(destid, idtab->table);
destid += idtab->start;
} else
destid = RIO_INVALID_DESTID;
spin_unlock(&idtab->lock);
return (u16)destid;
}
/**
* rio_destid_reserve - Reserve the specivied destID
* @net: RIO network
* @destid: destID to reserve
*
* Tries to reserve the specified destID.
* Returns 0 if successful.
*/
static int rio_destid_reserve(struct rio_net *net, u16 destid)
{
int oldbit;
struct rio_id_table *idtab = &net->destid_table;
destid -= idtab->start;
spin_lock(&idtab->lock);
oldbit = test_and_set_bit(destid, idtab->table);
spin_unlock(&idtab->lock);
return oldbit;
}
/**
* rio_destid_free - free a previously allocated destID
* @net: RIO network
* @destid: destID to free
*
* Makes the specified destID available for use.
*/
static void rio_destid_free(struct rio_net *net, u16 destid)
{
struct rio_id_table *idtab = &net->destid_table;
destid -= idtab->start;
spin_lock(&idtab->lock);
clear_bit(destid, idtab->table);
spin_unlock(&idtab->lock);
}
/**
* rio_destid_first - return first destID in use
* @net: RIO network
*/
static u16 rio_destid_first(struct rio_net *net)
{
int destid;
struct rio_id_table *idtab = &net->destid_table;
spin_lock(&idtab->lock);
destid = find_first_bit(idtab->table, idtab->max);
if (destid >= idtab->max)
destid = RIO_INVALID_DESTID;
else
destid += idtab->start;
spin_unlock(&idtab->lock);
return (u16)destid;
}
/**
* rio_destid_next - return next destID in use
* @net: RIO network
* @from: destination ID from which search shall continue
*/
static u16 rio_destid_next(struct rio_net *net, u16 from)
{
int destid;
struct rio_id_table *idtab = &net->destid_table;
spin_lock(&idtab->lock);
destid = find_next_bit(idtab->table, idtab->max, from);
if (destid >= idtab->max)
destid = RIO_INVALID_DESTID;
else
destid += idtab->start;
spin_unlock(&idtab->lock);
return (u16)destid;
}
/**
* rio_get_device_id - Get the base/extended device id for a device
* @port: RIO master port
* @destid: Destination ID of device
* @hopcount: Hopcount to device
*
* Reads the base/extended device id from a device. Returns the
* 8/16-bit device ID.
*/
static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
{
u32 result;
rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
return RIO_GET_DID(port->sys_size, result);
}
/**
* rio_set_device_id - Set the base/extended device id for a device
* @port: RIO master port
* @destid: Destination ID of device
* @hopcount: Hopcount to device
* @did: Device ID value to be written
*
* Writes the base/extended device id from a device.
*/
static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
{
rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
RIO_SET_DID(port->sys_size, did));
}
/**
* rio_local_set_device_id - Set the base/extended device id for a port
* @port: RIO master port
* @did: Device ID value to be written
*
* Writes the base/extended device id from a device.
*/
static void rio_local_set_device_id(struct rio_mport *port, u16 did)
{
rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
did));
}
/**
* rio_clear_locks- Release all host locks and signal enumeration complete
* @net: RIO network to run on
*
* Marks the component tag CSR on each device with the enumeration
* complete flag. When complete, it then release the host locks on
* each device. Returns 0 on success or %-EINVAL on failure.
*/
static int rio_clear_locks(struct rio_net *net)
{
struct rio_mport *port = net->hport;
struct rio_dev *rdev;
u32 result;
int ret = 0;
/* Release host device id locks */
rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
if ((result & 0xffff) != 0xffff) {
printk(KERN_INFO
"RIO: badness when releasing host lock on master port, result %8.8x\n",
result);
ret = -EINVAL;
}
list_for_each_entry(rdev, &net->devices, net_list) {
rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);
if ((result & 0xffff) != 0xffff) {
printk(KERN_INFO
"RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",
rdev->vid, rdev->did);
ret = -EINVAL;
}
/* Mark device as discovered and enable master */
rio_read_config_32(rdev,
rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
&result);
result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER;
rio_write_config_32(rdev,
rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
result);
}
return ret;
}
/**
* rio_enum_host- Set host lock and initialize host destination ID
* @port: Master port to issue transaction
*
* Sets the local host master port lock and destination ID register
* with the host device ID value. The host device ID value is provided
* by the platform. Returns %0 on success or %-1 on failure.
*/
static int rio_enum_host(struct rio_mport *port)
{
u32 result;
/* Set master port host device id lock */
rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
if ((result & 0xffff) != port->host_deviceid)
return -1;
/* Set master port destid and init destid ctr */
rio_local_set_device_id(port, port->host_deviceid);
return 0;
}
/**
* rio_device_has_destid- Test if a device contains a destination ID register
* @port: Master port to issue transaction
* @src_ops: RIO device source operations
* @dst_ops: RIO device destination operations
*
* Checks the provided @src_ops and @dst_ops for the necessary transaction
* capabilities that indicate whether or not a device will implement a
* destination ID register. Returns 1 if true or 0 if false.
*/
static int rio_device_has_destid(struct rio_mport *port, int src_ops,
int dst_ops)
{
u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;
return !!((src_ops | dst_ops) & mask);
}
/**
* rio_release_dev- Frees a RIO device struct
* @dev: LDM device associated with a RIO device struct
*
* Gets the RIO device struct associated a RIO device struct.
* The RIO device struct is freed.
*/
static void rio_release_dev(struct device *dev)
{
struct rio_dev *rdev;
rdev = to_rio_dev(dev);
kfree(rdev);
}
/**
* rio_is_switch- Tests if a RIO device has switch capabilities
* @rdev: RIO device
*
* Gets the RIO device Processing Element Features register
* contents and tests for switch capabilities. Returns 1 if
* the device is a switch or 0 if it is not a switch.
* The RIO device struct is freed.
*/
static int rio_is_switch(struct rio_dev *rdev)
{
if (rdev->pef & RIO_PEF_SWITCH)
return 1;
return 0;
}
/**
* rio_setup_device- Allocates and sets up a RIO device
* @net: RIO network
* @port: Master port to send transactions
* @destid: Current destination ID
* @hopcount: Current hopcount
* @do_enum: Enumeration/Discovery mode flag
*
* Allocates a RIO device and configures fields based on configuration
* space contents. If device has a destination ID register, a destination
* ID is either assigned in enumeration mode or read from configuration
* space in discovery mode. If the device has switch capabilities, then
* a switch is allocated and configured appropriately. Returns a pointer
* to a RIO device on success or NULL on failure.
*
*/
static struct rio_dev *rio_setup_device(struct rio_net *net,
struct rio_mport *port, u16 destid,
u8 hopcount, int do_enum)
{
int ret = 0;
struct rio_dev *rdev;
struct rio_switch *rswitch = NULL;
int result, rdid;
size_t size;
u32 swpinfo = 0;
size = sizeof(struct rio_dev);
if (rio_mport_read_config_32(port, destid, hopcount,
RIO_PEF_CAR, &result))
return NULL;
if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
rio_mport_read_config_32(port, destid, hopcount,
RIO_SWP_INFO_CAR, &swpinfo);
if (result & RIO_PEF_SWITCH) {
size += (RIO_GET_TOTAL_PORTS(swpinfo) *
sizeof(rswitch->nextdev[0])) + sizeof(*rswitch);
}
}
rdev = kzalloc(size, GFP_KERNEL);
if (!rdev)
return NULL;
rdev->net = net;
rdev->pef = result;
rdev->swpinfo = swpinfo;
rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
&result);
rdev->did = result >> 16;
rdev->vid = result & 0xffff;
rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,
&rdev->device_rev);
rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,
&result);
rdev->asm_did = result >> 16;
rdev->asm_vid = result & 0xffff;
rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,
&result);
rdev->asm_rev = result >> 16;
if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = result & 0xffff;
rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
hopcount);
rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
hopcount, RIO_EFB_ERR_MGMNT);
}
rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
&rdev->src_ops);
rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
&rdev->dst_ops);
if (do_enum) {
/* Assign component tag to device */
if (next_comptag >= 0x10000) {
pr_err("RIO: Component Tag Counter Overflow\n");
goto cleanup;
}
rio_mport_write_config_32(port, destid, hopcount,
RIO_COMPONENT_TAG_CSR, next_comptag);
rdev->comp_tag = next_comptag++;
rdev->do_enum = true;
} else {
rio_mport_read_config_32(port, destid, hopcount,
RIO_COMPONENT_TAG_CSR,
&rdev->comp_tag);
}
if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {
if (do_enum) {
rio_set_device_id(port, destid, hopcount, next_destid);
rdev->destid = next_destid;
next_destid = rio_destid_alloc(net);
} else
rdev->destid = rio_get_device_id(port, destid, hopcount);
rdev->hopcount = 0xff;
} else {
/* Switch device has an associated destID which
* will be adjusted later
*/
rdev->destid = destid;
rdev->hopcount = hopcount;
}
/* If a PE has both switch and other functions, show it as a switch */
if (rio_is_switch(rdev)) {
rswitch = rdev->rswitch;
rswitch->port_ok = 0;
spin_lock_init(&rswitch->lock);
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
if (!rswitch->route_table)
goto cleanup;
/* Initialize switch route table */
for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
rdid++)
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
rdev->comp_tag & RIO_CTAG_UDEVID);
if (do_enum)
rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
list_add_tail(&rswitch->node, &net->switches);
} else {
if (do_enum)
/*Enable Input Output Port (transmitter reviever)*/
rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
rdev->comp_tag & RIO_CTAG_UDEVID);
}
rdev->dev.parent = &port->dev;
rio_attach_device(rdev);
device_initialize(&rdev->dev);
rdev->dev.release = rio_release_dev;
rio_dev_get(rdev);
rdev->dma_mask = DMA_BIT_MASK(32);
rdev->dev.dma_mask = &rdev->dma_mask;
rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
0, 0xffff);
ret = rio_add_device(rdev);
if (ret)
goto cleanup;
return rdev;
cleanup:
if (rswitch)
kfree(rswitch->route_table);
kfree(rdev);
return NULL;
}
/**
* rio_sport_is_active- Tests if a switch port has an active connection.
* @port: Master port to send transaction
* @destid: Associated destination ID for switch
* @hopcount: Hopcount to reach switch
* @sport: Switch port number
*
* Reads the port error status CSR for a particular switch port to
* determine if the port has an active link. Returns
* %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
* inactive.
*/
static int
rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
{
u32 result = 0;
u32 ext_ftr_ptr;
ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
while (ext_ftr_ptr) {
rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr, &result);
result = RIO_GET_BLOCK_ID(result);
if ((result == RIO_EFB_SER_EP_FREE_ID) ||
(result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
(result == RIO_EFB_SER_EP_FREC_ID))
break;
ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
ext_ftr_ptr);
}
if (ext_ftr_ptr)
rio_mport_read_config_32(port, destid, hopcount,
ext_ftr_ptr +
RIO_PORT_N_ERR_STS_CSR(sport),
&result);
return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
* rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
* @port: Master port to send transaction
* @hopcount: Number of hops to the device
*
* Used during enumeration to read the Host Device ID Lock CSR on a
* RIO device. Returns the value of the lock register.
*/
static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
{
u32 result;
rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
RIO_HOST_DID_LOCK_CSR, &result);
return (u16) (result & 0xffff);
}
/**
* rio_enum_peer- Recursively enumerate a RIO network through a master port
* @net: RIO network being enumerated
* @port: Master port to send transactions
* @hopcount: Number of hops into the network
* @prev: Previous RIO device connected to the enumerated one
* @prev_port: Port on previous RIO device
*
* Recursively enumerates a RIO network. Transactions are sent via the
* master port passed in @port.
*/
static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
u8 hopcount, struct rio_dev *prev, int prev_port)
{
struct rio_dev *rdev;
u32 regval;
int tmp;
if (rio_mport_chk_dev_access(port,
RIO_ANY_DESTID(port->sys_size), hopcount)) {
pr_debug("RIO: device access check failed\n");
return -1;
}
if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {
pr_debug("RIO: PE already discovered by this host\n");
/*
* Already discovered by this host. Add it as another
* link to the existing device.
*/
rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size),
hopcount, RIO_COMPONENT_TAG_CSR, ®val);
if (regval) {
rdev = rio_get_comptag((regval & 0xffff), NULL);
if (rdev && prev && rio_is_switch(prev)) {
pr_debug("RIO: redundant path to %s\n",
rio_name(rdev));
prev->rswitch->nextdev[prev_port] = rdev;
}
}
return 0;
}
/* Attempt to acquire device lock */
rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
hopcount,
RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
< port->host_deviceid) {
/* Delay a bit */
mdelay(1);
/* Attempt to acquire device lock again */
rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
hopcount,
RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
}
if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {
pr_debug(
"RIO: PE locked by a higher priority host...retreating\n");
return -1;
}
/* Setup new RIO device */
rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
hopcount, 1);
if (rdev) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
rdev->prev = prev;
if (prev && rio_is_switch(prev))
prev->rswitch->nextdev[prev_port] = rdev;
} else
return -1;
if (rio_is_switch(rdev)) {
int sw_destid;
int cur_destid;
int sw_inport;
u16 destid;
int port_num;
sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport, 0);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
destid = rio_destid_first(net);
while (destid != RIO_INVALID_DESTID && destid < next_destid) {
if (destid != port->host_deviceid) {
rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
destid, sw_inport, 0);
rdev->rswitch->route_table[destid] = sw_inport;
}
destid = rio_destid_next(net, destid + 1);
}
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did,
RIO_GET_TOTAL_PORTS(rdev->swpinfo));
sw_destid = next_destid;
for (port_num = 0;
port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
port_num++) {
if (sw_inport == port_num) {
rio_enable_rx_tx_port(port, 0,
RIO_ANY_DESTID(port->sys_size),
hopcount, port_num);
rdev->rswitch->port_ok |= (1 << port_num);
continue;
}
cur_destid = next_destid;
if (rio_sport_is_active
(port, RIO_ANY_DESTID(port->sys_size), hopcount,
port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
rio_enable_rx_tx_port(port, 0,
RIO_ANY_DESTID(port->sys_size),
hopcount, port_num);
rdev->rswitch->port_ok |= (1 << port_num);
rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
RIO_ANY_DESTID(port->sys_size),
port_num, 0);
if (rio_enum_peer(net, port, hopcount + 1,
rdev, port_num) < 0)
return -1;
/* Update routing tables */
destid = rio_destid_next(net, cur_destid + 1);
if (destid != RIO_INVALID_DESTID) {
for (destid = cur_destid;
destid < next_destid;) {
if (destid != port->host_deviceid) {
rio_route_add_entry(rdev,
RIO_GLOBAL_TABLE,
destid,
port_num,
0);
rdev->rswitch->
route_table[destid] =
port_num;
}
destid = rio_destid_next(net,
destid + 1);
}
}
} else {
/* If switch supports Error Management,
* set PORT_LOCKOUT bit for unused port
*/
if (rdev->em_efptr)
rio_set_port_lockout(rdev, port_num, 1);
rdev->rswitch->port_ok &= ~(1 << port_num);
}
}
/* Direct Port-write messages to the enumeratiing host */
if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
(rdev->em_efptr)) {
rio_write_config_32(rdev,
rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
(port->host_deviceid << 16) |
(port->sys_size << 15));
}
rio_init_em(rdev);
/* Check for empty switch */
if (next_destid == sw_destid)
next_destid = rio_destid_alloc(net);
rdev->destid = sw_destid;
} else
pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
rio_name(rdev), rdev->vid, rdev->did);
return 0;
}
/**
* rio_enum_complete- Tests if enumeration of a network is complete
* @port: Master port to send transaction
*
* Tests the PGCCSR discovered bit for non-zero value (enumeration
* complete flag). Return %1 if enumeration is complete or %0 if
* enumeration is incomplete.
*/
static int rio_enum_complete(struct rio_mport *port)
{
u32 regval;
rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
®val);
return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
}
/**
* rio_disc_peer- Recursively discovers a RIO network through a master port
* @net: RIO network being discovered
* @port: Master port to send transactions
* @destid: Current destination ID in network
* @hopcount: Number of hops into the network
* @prev: previous rio_dev
* @prev_port: previous port number
*
* Recursively discovers a RIO network. Transactions are sent via the
* master port passed in @port.
*/
static int
rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
u8 hopcount, struct rio_dev *prev, int prev_port)
{
u8 port_num, route_port;
struct rio_dev *rdev;
u16 ndestid;
/* Setup new RIO device */
if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
rdev->prev = prev;
if (prev && rio_is_switch(prev))
prev->rswitch->nextdev[prev_port] = rdev;
} else
return -1;
if (rio_is_switch(rdev)) {
/* Associated destid is how we accessed this switch */
rdev->destid = destid;
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did,
RIO_GET_TOTAL_PORTS(rdev->swpinfo));
for (port_num = 0;
port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
port_num++) {
if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
continue;
if (rio_sport_is_active
(port, destid, hopcount, port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
rio_lock_device(port, destid, hopcount, 1000);
for (ndestid = 0;
ndestid < RIO_ANY_DESTID(port->sys_size);
ndestid++) {
rio_route_get_entry(rdev,
RIO_GLOBAL_TABLE,
ndestid,
&route_port, 0);
if (route_port == port_num)
break;
}
if (ndestid == RIO_ANY_DESTID(port->sys_size))
continue;
rio_unlock_device(port, destid, hopcount);
if (rio_disc_peer(net, port, ndestid,
hopcount + 1, rdev, port_num) < 0)
return -1;
}
}
} else
pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
rio_name(rdev), rdev->vid, rdev->did);
return 0;
}
/**
* rio_mport_is_active- Tests if master port link is active
* @port: Master port to test
*
* Reads the port error status CSR for the master port to
* determine if the port has an active link. Returns
* %RIO_PORT_N_ERR_STS_PORT_OK if the master port is active
* or %0 if it is inactive.
*/
static int rio_mport_is_active(struct rio_mport *port)
{
u32 result = 0;
u32 ext_ftr_ptr;
int *entry = rio_mport_phys_table;
do {
if ((ext_ftr_ptr =
rio_mport_get_feature(port, 1, 0, 0, *entry)))
break;
} while (*++entry >= 0);
if (ext_ftr_ptr)
rio_local_read_config_32(port,
ext_ftr_ptr +
RIO_PORT_N_ERR_STS_CSR(port->index),
&result);
return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
* rio_alloc_net- Allocate and configure a new RIO network
* @port: Master port associated with the RIO network
* @do_enum: Enumeration/Discovery mode flag
* @start: logical minimal start id for new net
*
* Allocates a RIO network structure, initializes per-network
* list heads, and adds the associated master port to the
* network list of associated master ports. Returns a
* RIO network pointer on success or %NULL on failure.
*/
static struct rio_net *rio_alloc_net(struct rio_mport *port,
int do_enum, u16 start)
{
struct rio_net *net;
net = kzalloc(sizeof(struct rio_net), GFP_KERNEL);
if (net && do_enum) {
net->destid_table.table = kcalloc(
BITS_TO_LONGS(RIO_MAX_ROUTE_ENTRIES(port->sys_size)),
sizeof(long),
GFP_KERNEL);
if (net->destid_table.table == NULL) {
pr_err("RIO: failed to allocate destID table\n");
kfree(net);
net = NULL;
} else {
net->destid_table.start = start;
net->destid_table.max =
RIO_MAX_ROUTE_ENTRIES(port->sys_size);
spin_lock_init(&net->destid_table.lock);
}
}
if (net) {
INIT_LIST_HEAD(&net->node);
INIT_LIST_HEAD(&net->devices);
INIT_LIST_HEAD(&net->switches);
INIT_LIST_HEAD(&net->mports);
list_add_tail(&port->nnode, &net->mports);
net->hport = port;
net->id = port->id;
}
return net;
}
/**
* rio_update_route_tables- Updates route tables in switches
* @net: RIO network to run update on
*
* For each enumerated device, ensure that each switch in a system
* has correct routing entries. Add routes for devices that where
* unknown dirung the first enumeration pass through the switch.
*/
static void rio_update_route_tables(struct rio_net *net)
{
struct rio_dev *rdev, *swrdev;
struct rio_switch *rswitch;
u8 sport;
u16 destid;
list_for_each_entry(rdev, &net->devices, net_list) {
destid = rdev->destid;
list_for_each_entry(rswitch, &net->switches, node) {
if (rio_is_switch(rdev) && (rdev->rswitch == rswitch))
continue;
if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
swrdev = sw_to_rio_dev(rswitch);
/* Skip if destid ends in empty switch*/
if (swrdev->destid == destid)
continue;
sport = RIO_GET_PORT_NUM(swrdev->swpinfo);
rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,
destid, sport, 0);
rswitch->route_table[destid] = sport;
}
}
}
}
/**
* rio_init_em - Initializes RIO Error Management (for switches)
* @rdev: RIO device
*
* For each enumerated switch, call device-specific error management
* initialization routine (if supplied by the switch driver).
*/
static void rio_init_em(struct rio_dev *rdev)
{
if (rio_is_switch(rdev) && (rdev->em_efptr) &&
rdev->rswitch->ops && rdev->rswitch->ops->em_init) {
rdev->rswitch->ops->em_init(rdev);
}
}
/**
* rio_pw_enable - Enables/disables port-write handling by a master port
* @port: Master port associated with port-write handling
* @enable: 1=enable, 0=disable
*/
static void rio_pw_enable(struct rio_mport *port, int enable)
{
if (port->ops->pwenable)
port->ops->pwenable(port, enable);
}
/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
* @flags: Enumeration control flags
*
* Starts the enumeration process. If somebody has enumerated our
* master port device, then give up. If not and we have an active
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
static int rio_enum_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
int rc = 0;
printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
mport->name);
/*
* To avoid multiple start requests (repeat enumeration is not supported
* by this method) check if enumeration/discovery was performed for this
* mport: if mport was added into the list of mports for a net exit
* with error.
*/
if (mport->nnode.next || mport->nnode.prev)
return -EBUSY;
/* If somebody else enumerated our master port device, bail. */
if (rio_enum_host(mport) < 0) {
printk(KERN_INFO
"RIO: master port %d device has been enumerated by a remote host\n",
mport->id);
rc = -EBUSY;
goto out;
}
/* If master port has an active link, allocate net and enum peers */
if (rio_mport_is_active(mport)) {
net = rio_alloc_net(mport, 1, 0);
if (!net) {
printk(KERN_ERR "RIO: failed to allocate new net\n");
rc = -ENOMEM;
goto out;
}
/* reserve mport destID in new net */
rio_destid_reserve(net, mport->host_deviceid);
/* Enable Input Output Port (transmitter reviever) */
rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
/* Set component tag for host */
rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR,
next_comptag++);
next_destid = rio_destid_alloc(net);
if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {
/* A higher priority host won enumeration, bail. */
printk(KERN_INFO
"RIO: master port %d device has lost enumeration to a remote host\n",
mport->id);
rio_clear_locks(net);
rc = -EBUSY;
goto out;
}
/* free the last allocated destID (unused) */
rio_destid_free(net, next_destid);
rio_update_route_tables(net);
rio_clear_locks(net);
rio_pw_enable(mport, 1);
} else {
printk(KERN_INFO "RIO: master port %d link inactive\n",
mport->id);
rc = -EINVAL;
}
out:
return rc;
}
/**
* rio_build_route_tables- Generate route tables from switch route entries
* @net: RIO network to run route tables scan on
*
* For each switch device, generate a route table by copying existing
* route entries from the switch.
*/
static void rio_build_route_tables(struct rio_net *net)
{
struct rio_switch *rswitch;
struct rio_dev *rdev;
int i;
u8 sport;
list_for_each_entry(rswitch, &net->switches, node) {
rdev = sw_to_rio_dev(rswitch);
rio_lock_device(net->hport, rdev->destid,
rdev->hopcount, 1000);
for (i = 0;
i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size);
i++) {
if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE,
i, &sport, 0) < 0)
continue;
rswitch->route_table[i] = sport;
}
rio_unlock_device(net->hport, rdev->destid, rdev->hopcount);
}
}
/**
* rio_disc_mport- Start discovery through a master port
* @mport: Master port to send transactions
* @flags: discovery control flags
*
* Starts the discovery process. If we have an active link,
* then wait for the signal that enumeration is complete (if wait
* is allowed).
* When enumeration completion is signaled, start recursive
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
static int rio_disc_mport(struct rio_mport *mport, u32 flags)
{
struct rio_net *net = NULL;
unsigned long to_end;
printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
mport->name);
/* If master port has an active link, allocate net and discover peers */
if (rio_mport_is_active(mport)) {
if (rio_enum_complete(mport))
goto enum_done;
else if (flags & RIO_SCAN_ENUM_NO_WAIT)
return -EAGAIN;
pr_debug("RIO: wait for enumeration to complete...\n");
to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
while (time_before(jiffies, to_end)) {
if (rio_enum_complete(mport))
goto enum_done;
msleep(10);
}
pr_debug("RIO: discovery timeout on mport %d %s\n",
mport->id, mport->name);
goto bail;
enum_done:
pr_debug("RIO: ... enumeration done\n");
net = rio_alloc_net(mport, 0, 0);
if (!net) {
printk(KERN_ERR "RIO: Failed to allocate new net\n");
goto bail;
}
/* Read DestID assigned by enumerator */
rio_local_read_config_32(mport, RIO_DID_CSR,
&mport->host_deviceid);
mport->host_deviceid = RIO_GET_DID(mport->sys_size,
mport->host_deviceid);
if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
0, NULL, 0) < 0) {
printk(KERN_INFO
"RIO: master port %d device has failed discovery\n",
mport->id);
goto bail;
}
rio_build_route_tables(net);
}
return 0;
bail:
return -EBUSY;
}
static struct rio_scan rio_scan_ops = {
.owner = THIS_MODULE,
.enumerate = rio_enum_mport,
.discover = rio_disc_mport,
};
static bool scan;
module_param(scan, bool, 0);
MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
"(default = 0)");
/**
* rio_basic_attach:
*
* When this enumeration/discovery method is loaded as a module this function
* registers its specific enumeration and discover routines for all available
* RapidIO mport devices. The "scan" command line parameter controls ability of
* the module to start RapidIO enumeration/discovery automatically.
*
* Returns 0 for success or -EIO if unable to register itself.
*
* This enumeration/discovery method cannot be unloaded and therefore does not
* provide a matching cleanup_module routine.
*/
static int __init rio_basic_attach(void)
{
if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
return -EIO;
if (scan)
rio_init_mports();
return 0;
}
late_initcall(rio_basic_attach);
MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
MODULE_LICENSE("GPL");
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...