Revision b508eba08cabca570b58330e6ec8085b5ded1025 authored by Jim Lawton on 19 August 2016, 17:44:51 UTC, committed by Jim Lawton on 19 August 2016, 17:44:51 UTC
1 parent bf4037d
DAP_INTERFACE_SUBROUTINES.agc
# Copyright: Public domain.
# Filename: DAP_INTERFACE_SUBROUTINES.agc
# Purpose: Part of the source code for Luminary 1A build 099.
# It is part of the source code for the Lunar Module's (LM)
# Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler: yaYUL
# Contact: Ron Burkey <info@sandroid.org>.
# Website: www.ibiblio.org/apollo.
# Pages: 1406-1409
# Mod history: 2009-05-10 SN (Sergio Navarro). Started adapting
# from the Luminary131/ file of the same
# name, using Luminary099 page images.
# 2011-01-06 JL Fixed pseudo-label indentation.
#
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum. The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum. Many thanks to both. The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo. If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
# Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
# 16:27 JULY 14, 1969
# Page 1406
BANK 20
SETLOC DAPS3
BANK
EBANK= CDUXD
COUNT* $$/DAPIF
# MOD 0 DATE 11/15/66 BY GEORGE W. CHERRY
# MOD 1 1/23/67 MODIFICATION BY PETER ADLER
#
# FUNCTIONAL DESCRIPTION
# HEREIN IS A COLLECTION OF SUBROUTINES WHICH ALLOW MISSION CONTROL PROGRAMS TO CONTROL THE MODE
# AND INTERFACE WITH THE DAP.
#
# CALLING SEQUENCES
# IN INTERRUPT OR WITH INTERRUPT INHIBITED
# TC IBNKCALL
# FCADR ROUTINE
# IN A JOB WITHOUT INTERRUPT INHIBITED
# INHINT
# TC IBNKCALL
# FCADR ROUTINE
# RELINT
#
# OUTPUT
# SEE INDIVIDUAL ROUTINES BELOW
#
# DEBRIS
# A, L, AND SOMETIMES MDUETEMP ODE NOT IN PULSES MODE
# Page 1407
# SUBROUTINE NAMES:
# SETMAXDB, SETMINDB, RESTORDB, PFLITEDB
# MODIFIED: 30 JANUARY 1968 BY P. S. WEISSMAN TO CREATE RESTORDB.
# MODIFIED: 1 MARCH 1968 BY P. S. WEISSMAN TO SAVE EBANK AND CREATE PFLITEDB
#
# FUNCTIONAL DESCRIPTION:
# SETMAXDB -- SET DEADBAND TO 5.0 DEGREES
# SETMINDB -- SET DEADBAND TO 0.3 DEGREE
# RESTORDB -- SET DEADBAND TO MAX OR MIN ACCORDING TO SETTINGS OF DBSELECT BIT OF DAPBOOLS
# PFLITEDB -- SET DEADBAND TO 1.0 DEGREE AND ZERO THE COMMANDED ATTITUDE CHANGE AND COMMANDED RATE
#
# ALL ENTRIES SET UP A NOVAC JOB TO DO 1/ACCS SO THAT THE TJETLAW SWITCH CURVES ARE POSITIONED TO
# REFLECT TEH NEW DEADBAND. IT SHOULD BE NOTED THAT THE DEADBAND REFERS TO THE ATTITUDE IN THE P-, U-, AND V-AXES.
#
# SUBROUTINE CALLED: NOVAC
#
# CALLING SEQUENCE: SAME AS ABOVE
# OR TC RESTORDB +1 FROM ALLCOAST
#
# DEBRIS: A, L, Q, RUPTREG1, (ITEMPS IN NOVAC)
RESTORDB CAE DAPBOOLS # DETERMINE CREW-SELECTED DEADBAND.
MASK DBSELECT
EXTEND
BZF SETMINDB
SETMAXDB CAF WIDEDB # SET 5 DEGREE DEADBAND.
+1 TS DB
EXTEND # SET UP JOB TO RE-POSITION SWITCH CURVES.
QXCH RUPTREG1
CALLACCS CAF PRIO27
TC NOVAC
EBANK= AOSQ
2CADR 1/ACCJOB
TC RUPTREG1 # RETURN TO CALLER.
SETMINDB CAF NARROWDB # SET 0.3 DEGREE DEADBAND.
TCF SETMAXDB +1
PFLITEDB EXTEND # THE RETURN FROM CALLACCS IS TO RUPTREG1.
QXCH RUPTREG1
TC ZATTEROR # ZERO THE ERRORS AND COMMANDED RATES.
CAF POWERDB # SET DB TO 1.0 DEG.
TS DB
TCF CALLACCS # SET UP 1/ACCS AND RETURN TO CALLER.
NARROWDB OCTAL 00155 # 0.3 DEGREE SCALED AT 45.
# Page 1408
WIDEDB OCTAL 03434 # 5.0 DEGREES SCALED AT 45.
POWERDB DEC .02222 # 1.0 DEGREE SCALED AT 45.
ZATTEROR CAF EBANK6
XCH EBANK
TS L # SAVE CALLERS EBANK IN L.
CAE CDUX
TS CDUXD
CAE CDUY
TS CDUYD
CAE CDUZ
TS CDUZD
TCF STOPRATE +3
STOPRATE CAF EBANK6
XCH EBANK
TS L # SAVE CALLERS EBANK IN L.
+3 CAF ZERO
TS OMEGAPD
TS OMEGAQD
TS OMEGARD
TS DELCDUX
TS DELCDUY
TS DELCDUZ
TS DELPEROR
TS DELQEROR
TS DELREROR
LXCH EBANK # RESTORE CALLERS EBANK.
TC Q
# SUBROUTINE NAME: ALLCOAST
# WILL BE CALLED BY FRESH STARTS AND ENGINE OFF ROUTINES.
#
# CALLING SEQUENCE: (SAME AS ABOVE)
#
# EXIT: RETURN TO Q.
#
# SUBROUTINES CALLED: STOPRATE, RESTORDB, NOVAC
#
# ZERO: (FOR ALL AXES) AOS, ALPHA, AOSTERM, OMEGAD, DELCDU, DELEROR
#
# OUTPUT: DRIFTBIT/DAPBOOLS, OE, JOB TO DO 1/ACCS
#
# DEBRIS: A, L, Q, RUPTREG1, RUPTREG2, (ITEMPS IN NOVAC)
ALLCOAST EXTEND # SAVE Q FOR RETURN
QXCH RUPTREG2
# Page 1409
TC STOPRATE # CLEAR RATE INTERFACE. RETURN WITH A=0
LXCH EBANK # AND L=EBANK6. SAVE CALLER'S EBANK.
TS AOSQ
TS AOSQ +1
TS AOSR
TS AOSR +1
TS ALPHAQ # FOR DOWNLIST.
TS ALPHAR
TS AOSQTERM
TS AOSRTERM
LXCH EBANK # RESTORE EBANK (EBANK6 NO LONGER NEEDED)
CS DAPBOOLS # SET UP DRIFTBIT
MASK DRIFTBIT
ADS DAPBOOLS
TC RESTORDB +1 # RESTORE DEADBANK TO CREW-SELECTED VALUE.
TC RUPTREG2 # RETURN.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...