# Copyright:	Public domain.
# Filename:	SYSTEM_TEST_STANDARD_LEAD_INS.agc
# Purpose: 	Part of the source code for Luminary 1A build 099.
#		It is part of the source code for the Lunar Module's (LM)
#		Apollo Guidance Computer (AGC), for Apollo 11.
# Assembler:	yaYUL
# Contact:	Ron Burkey <info@sandroid.org>.
# Website:	www.ibiblio.org/apollo.
# Pages:	370-372
# Mod history:	2009-05-17 RSB	Adapted from the corresponding 
#				Luminary131 file, using page 
#				images from Luminary 1A.
#
# This source code has been transcribed or otherwise adapted from
# digitized images of a hardcopy from the MIT Museum.  The digitization
# was performed by Paul Fjeld, and arranged for by Deborah Douglas of
# the Museum.  Many thanks to both.  The images (with suitable reduction
# in storage size and consequent reduction in image quality as well) are
# available online at www.ibiblio.org/apollo.  If for some reason you
# find that the images are illegible, contact me at info@sandroid.org
# about getting access to the (much) higher-quality images which Paul
# actually created.
#
# Notations on the hardcopy document read, in part:
#
#	Assemble revision 001 of AGC program LMY99 by NASA 2021112-61
#	16:27 JULY 14, 1969 

# Page 370
		EBANK=	XSM
		
		BANK	33
		SETLOC	E/PROG
		BANK
		
		COUNT*	$$/P07
		
# SPECIAL PROGRAMS TO EASE THE PANGS OF ERASABLE MEMORY PROGRAMS.
#
# E/BKCALL	FOR DOING BANKCALLS FROM AND RETURNING TO ERASABLE.
#
# THIS ROUTINE IS CALLABLE FROM ERASABLE OR FIXED.  LIKE BANKCALL, HOWEVER, SWITCHING BETWEEN S3 AND S4
# IS NOT POSSIBLE.
#
# THE CALLING SEQUENCE IS
#
#	TC	BANKCALL
#	CADR	E/BKCALL
#	CADR	ROUTINE		# WHERE TO WANT TO GO IN FIXED.
#	RETURN HERE FROM DISPLAY TERMINATE, BAD STALL OR TC Q.
#	RETURN HERE FROM DISPLAY PROCEED OR GOOD RETURN FROM STALL.
#	RETURN HERE FROM DISPLAY ENTER OR RECYCLE.
#
# THIS ROUTINE REQUIRES TWO ERASABLES (EBUF2, +1) IN UNSWITCHED WHICH ARE UNSHARED BY INTERRUPTS AND
# OTHER EMEMORY PROGRAMS.
#
# A + L ARE PRESERVED THROUGH BANKCALL AND E/BKCALL.

E/BKCALL	DXCH	BUF2		# SAVE A,L AND GET DP RETURN
		DXCH	EBUF2		# SAVE DP RETURN.
		INCR	EBUF2		# RETURN +1 BECAUSE DOUBLE CADR.
		CA	BBANK
		MASK	LOW10		# GET CURRENT EBANK.  (SBANK SOMEDAY)
		ADS	EBUF2	+1	# FORM BBCON.  (WAS FBANK)
		NDX	EBUF2
		CA	0 	-1	# GET CADR OF ROUTINE.
		TC	SWCALL		# GO TO ROUTINE, SETTING Q TO SWRETURN
					# AND RESTORING A + L.
		TC	+4		# TX Q, V34, OR BAD STALL RETURN.
		TC	+2		# PROCEED OR GOOD STALL RETURN.
		INCR	EBUF2		# ENTER OR RECYCLE RETURN
		INCR	EBUF2
E/SWITCH	DXCH	EBUF2
		DTCB
		
# Page 371
# E/CALL	FOR CALLING A FIXED MEMORY INTERPRETIVE SUBROUTINE FROM ERASABLE AND RETURNING TO ERASABLE.
#
# THE CALLING SEQUENCE IS...
#
#	RTB
#		E/CALL
#	CADR	ROUTINE			# THE INTERPRETIVE SUBROUTINE YOU WANT
#					# RETURNS HERE IN INTERPRETIVE.
	
E/CALL		LXCH	LOC		# ADRES -1 OF CADR.
		INDEX	L
		CA	L		# CADR IN A.
		INCR	L
		INCR	L		# RETURN ADRES IN L.
		DXCH	EBUF2		# STORE CADR AND RETURN
		TC	INTPRET
		CALL
			EBUF2		# INDIRECTLY EXECUTE ROUTING.  IT MUST
		EXIT			# LEAVE VIA RVQ OR EQUIVALENT.
		LXCH	EBUF2 	+1	# PICK UP RETURN.
		TCF	INTPRET +2	# SET LOC AND RETURN TO CALLER.
		
# Page 372
# E/JOBWAK	FOR WAKING UP ERASABLE MEMORY JOBS.
#
# THIS ROUTINE MUST BE CALLED IN INTERRUPT OR WITH INTERRUPTS INHIBITED.
#
# THE CALLING SEQUENCE IS
#
#	INHINT
#	...
#	CA	WAKEADR		# ADDRESS OF SLEEPING JOB
#	TC	IBNKCALL
#	CADR	E/JOBWAK
#	...			# RETURNS HERE
#	RELINT			# IF YOU DID AND INHINT

		BANK	33
		SETLOC	E/PROG
		BANK
		
		COUNT*	 $$/P07
		
E/JOBWAK	TC	JOBWAKE		# ARRIVE WITH ADRES IN A.
		CS	BIT11
		NDX	LOCCTR
		ADS	LOC		# KNOCK FIXED MEMORY BIT OUT OF ADRES.
		TC	RUPTREG3	# RETURN