| b544d1e | Takashi Iwai | 03 February 2012, 10:56:35 UTC | ALSA: hda/realtek - Add missing Bass and CLFE as vmaster slaves The recent changes in Realtek auto-parser added the new "Bass Speaker" and "CLFE" mixer elements which should be tracked as vmaster slaves, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720 Signed-off-by: Takashi Iwai <tiwai@suse.de> | 03 February 2012, 13:04:11 UTC |
| b5bcc18 | Takashi Iwai | 02 February 2012, 09:30:17 UTC | ALSA: hda - Disable dynamic-power control for VIA as default Since the dynamic pin power-control and the analog low-current mode may lead to pop-noise, it's safer to set it off as default. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 02 February 2012, 09:34:06 UTC |
| e9d010c | Takashi Iwai | 01 February 2012, 09:33:23 UTC | ALSA: hda - Allow analog low-current mode when dynamic power-control is on VIA codecs have several different power-saving features, and one of them is the analog low-current mode. But it turned out that the ALC mode causes pop-noises at each on/off time on some machines. As a quick workaround, disable the ALC when another power-saving feature, the dynamic pin power-control, is turned off, too, since the dynamic power-control is already exposed as a mixer enum element so that user can turn it on/off freely. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 02 February 2012, 09:18:09 UTC |
| 9243392 | Takashi Iwai | 24 January 2012, 12:58:36 UTC | ALSA: hda - Fix the logic to detect VIA analog low-current mode The analog low-current mode must be enabled when the no stream is running but the current detection checks it in a wrong way. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=741128 Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 02 February 2012, 09:16:32 UTC |
| 054d867 | Takashi Iwai | 24 January 2012, 11:25:50 UTC | ALSA: hda - Check power-state before changing in patch_via.c Instead of always writing AC_VERB_SET_POWER_STATE, check the current power-state and don't write again if the value is already set. This may reduce the click noise upon the dynamic power-state change (e.g. in analog-input mixer). Signed-off-by: Takashi Iwai <tiwai@suse.de> | 02 February 2012, 09:15:16 UTC |
| 54c2a89 | David Henningsson | 01 February 2012, 11:05:41 UTC | ALSA: HDA: Fix duplicated output to more than one codec This typo caused the wrong codec's nid to be checked for wcaps type. As a result, sometimes speakers would duplicate the output sent to HDMI output. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/924320 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 February 2012, 11:13:16 UTC |
| f70eecd | Dylan Reid | 31 January 2012, 21:04:41 UTC | ALSA: hda - Fix calling cs_automic twice for Cirrus codecs. If cs_automic is called twice (like it is during init) while the mic is present, it will over-write the last_input with the new one, causing it to switch back to the automic input when the mic is unplugged. This leaves the driver in a state (cur_input, last_input, and automix_idx the same) where the internal mic can not be selected until it is rebooted without the mic attached. Check that the mic hasn't already been switched to before setting last_input. Signed-off-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 01 February 2012, 08:43:46 UTC |
| ea51e50 | Takashi Iwai | 31 January 2012, 14:13:14 UTC | Merge branch 'fix/asoc' into for-linus | 31 January 2012, 14:13:14 UTC |
| 3422a47 | David Henningsson | 31 January 2012, 09:31:49 UTC | ALSA: HDA: Remove quirk for Toshiba Qosmio G50 The user reports that model=auto works better than current handling on a 3.2 based kernel (with jack detection patches backported). Since model=auto is what we prefer these days anyway, the quirk should be removed. Alsa-info for the relevant machine: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/923316/+attachment/2702812/+files/alsa-info.txt.Pbfno2x7bp BugLink: https://bugs.launchpad.net/bugs/923316 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 31 January 2012, 14:12:08 UTC |
| 05c3b36 | David Henningsson | 31 January 2012, 08:04:15 UTC | ALSA: HDA: Fix jack creation for codecs with front and rear Line In If a codec has both a front and a rear Line In, two controls both named "Line Jack" will be created, which causes parsing to fail. While a long term solution might be to name the jacks differently, this extra check is consistent with what is already being done in many auto-parsers, and will also protect against other cases when two inputs have the same label. BugLink: https://bugs.launchpad.net/bugs/923409 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 31 January 2012, 14:11:21 UTC |
| 31150f2 | Takashi Iwai | 30 January 2012, 09:54:08 UTC | ALSA: hda - Apply 0x0f-VREF fix to all ASUS laptops with ALC861/660 It turned out that other ASUS laptops require the similar fix to enable the VREF on the pin 0x0f for the secret output amp, not only ASUS A6Rp. Moreover, it's required even when the pin is being used as the output. Thus, writing a fixed value doesn't work always. This patch applies the VREF-fix for all ASUS laptops with ALC861/660 in a fixup function that checks the current value and turns on only the VREF value no matter whether input or output direction is set. The automute function is modified as well to keep the pin VREF upon muting/unmuting via pin-control; otherwise the pin VREF is reset at plugging/unplugging a jack. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 January 2012, 15:26:07 UTC |
| 8dbd52d | Takashi Iwai | 30 January 2012, 14:25:05 UTC | Merge tag 'asoc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into fix/asoc A bunch of small driver specific fixes - nothing terribly exciting here, all of this will only affect people using particular devices and then usually only in some use cases. | 30 January 2012, 14:25:05 UTC |
| 1ae5cbc | Denis 'GNUtoo' Carikli | 29 January 2012, 23:31:47 UTC | ASoC: neo1973_wm8753: remove references to the neo1973-gta01 machine The Openmoko GTA01 machine has been removed from the machine ID database, so we need to remove references to it as well. Without that fix we have: sound/soc/samsung/neo1973_wm8753.c: In function ‘neo1973_wm8753_init’: sound/soc/samsung/neo1973_wm8753.c:325:2: error: implicit declaration of function ‘machine_is_neo1973_gta01’ Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 30 January 2012, 13:22:13 UTC |
| 8422fa1 | Axel Lin | 30 January 2012, 09:10:58 UTC | ALSA: Add #ifdef CONFIG_PCI guard for snd_pci_quirk_* functions This fixes below build warning when CONFIG_PCI is not set. CC sound/sound_core.o In file included from sound/sound_core.c:15: include/sound/core.h:454: warning: 'struct pci_dev' declared inside parameter list include/sound/core.h:454: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 30 January 2012, 09:17:52 UTC |
| 114395c | UK KIM | 27 January 2012, 16:52:22 UTC | ASoC: wm_hubs: fix wrong bits for LINEOUT2 N/P mixer Signed-off-by: UK KIM <w0806.kim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 27 January 2012, 20:25:47 UTC |
| a389d67 | David Henningsson | 27 January 2012, 13:31:19 UTC | ALSA: HDA: Remove quirk for Asus N53Jq The user reports that he needs to add model=auto for audio to work properly. In fact, since node 0x15 is not even a pin node, the existing fixup is definitely wrong. Relevant information can be found in the buglink below. Cc: stable@kernel.org (3.2+) BugLink: https://bugs.launchpad.net/bugs/918254 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 27 January 2012, 14:06:46 UTC |
| 77231ab | Mark Brown | 20 January 2012, 12:19:43 UTC | ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 26 January 2012, 18:58:00 UTC |
| b3a8152 | Takashi Iwai | 26 January 2012, 14:56:16 UTC | ALSA: hda - Fix silent output on Haier W18 laptop The very same problem is seen on Haier W18 laptop with ALC861 as seen on ASUS A6Rp, which was fixed by the commit 3b25eb69. Now we just need to add a new SSID entry pointing to the same fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 26 January 2012, 14:59:25 UTC |
| 5c1b136 | Mark Brown | 25 January 2012, 21:10:33 UTC | ASoC: wm5100: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 25 January 2012, 21:18:05 UTC |
| 5539a10 | Mark Brown | 25 January 2012, 21:10:21 UTC | ASoC: wm8962: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 25 January 2012, 21:17:29 UTC |
| 1b76d2e | Mark Brown | 25 January 2012, 21:10:07 UTC | ASoC: wm8996: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 25 January 2012, 21:17:28 UTC |
| a188fcb | Mark Brown | 25 January 2012, 17:57:16 UTC | ASoC: wm5100: Fix microphone configuration We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org | 25 January 2012, 18:20:21 UTC |
| 9fb8352 | Mark Brown | 25 January 2012, 15:19:20 UTC | ASoC: wm5100: Make sure we switch to button reporting mode When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 25 January 2012, 15:35:40 UTC |
| a6a600d | Gustavo Maciel Dias Vieira | 24 January 2012, 15:27:56 UTC | ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID HP laptop models with buggy BIOS are apparently frequent, including machines with different codecs. Set the polarity of the mute led based on the SSID and include an entry for the HP Mini 110-3100. Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org> Tested-by: Predrag Ivanovic <predivan@open.telekom.rs> Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 25 January 2012, 09:00:12 UTC |
| 3b25eb6 | Takashi Iwai | 25 January 2012, 08:55:46 UTC | ALSA: hda - Fix silent output on ASUS A6Rp The refactoring of Realtek codec driver in 3.2 kernel caused a regression for ASUS A6Rp laptop; it doesn't give any output. The reason was that this machine has a secret master mute (or EAPD) control via NID 0x0f VREF. Setting VREF50 on this node makes the sound working again. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 25 January 2012, 08:59:57 UTC |
| 769fab2 | Jesper Juhl | 23 January 2012, 20:02:57 UTC | ALSA: Fix memory leak on error in snd_compr_set_params() If copy_from_user() does not return 0 we'll leak the memory we allocated for 'params' when that variable goes out of scope. Also a small CodingStyle cleanup: Use braces on both branches of if/else when one branch needs it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 24 January 2012, 14:29:32 UTC |
| 4d20bb1 | Raymond Yau | 17 January 2012, 03:41:47 UTC | ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support - check SDAC bit of AC97 primary codec when create "rear" device 3, "4ch" device 2 and "4ch Duplication" switch as the card need a four channels AC97 codec to support surround40. Signed-off-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 24 January 2012, 14:28:05 UTC |
| c83f1d7 | Jesper Juhl | 23 January 2012, 21:28:44 UTC | ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on error In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 24 January 2012, 11:34:19 UTC |
| 7edf1a4 | Jesper Juhl | 23 January 2012, 20:15:48 UTC | ASoC: wm8958: Use correct format string in dev_err() call To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 23 January 2012, 21:10:22 UTC |
| b4ead01 | Takashi Iwai | 23 January 2012, 17:23:36 UTC | ALSA: hda - Fix silent outputs from docking-station jacks of Dell laptops The recent change of the power-widget handling for IDT codecs caused the silent output from the docking-station line-out jack. This was partially fixed by the commit f2cbba7602383cd9cdd21f0a5d0b8bd1aad47b33 "ALSA: hda - Fix the lost power-setup of seconary pins after PM resume". But the line-out on the docking-station is still silent when booted with the jack plugged even by this fix. The remainig bug is that the power-widget is set off in stac92xx_init() because the pins in cfg->line_out_pins[] aren't checked there properly but only hp_pins[] are checked in is_nid_hp_pin(). This patch fixes the problem by checking both HP and line-out pins and leaving the power-map correctly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42637 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 January 2012, 17:23:36 UTC |
| 29c5fbb | David Henningsson | 23 January 2012, 15:39:55 UTC | ALSA: HDA: Use model=auto for Thinkpad T510 The user reports that model=auto works fine for him. Using model=auto bring in new features such as jack detection notification to userspace. Alsa info is available at http://paste.ubuntu.com/805351/ Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 January 2012, 16:20:58 UTC |
| 52409aa | Takashi Iwai | 23 January 2012, 16:10:24 UTC | ALSA: hda - Fix buffer-alignment regression with Nvidia HDMI The commit 2ae66c26550cd94b0e2606a9275eb0ab7070ad0e ALSA: hda: option to enable arbitrary buffer/period sizes introduced a regression on machines with Intel controller and Nvidia HDMI. The reason is that the driver modifies the global variable align_buffer_size when an Intel controller is found, and the Nvidia HDMI controller is probed after Intel although Nvidia chips require the aligned buffers. This patch fixes the problem by moving the flag into the local struct so that it's not affected by other controllers. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42567 Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 23 January 2012, 16:15:03 UTC |
| a14304e | Mark Brown | 21 January 2012, 21:48:53 UTC | ASoC: wm8996: Call _POST_PMU callback for CPVDD We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 22 January 2012, 16:14:06 UTC |
| 6b35f92 | Fabio Estevam | 19 January 2012, 12:23:22 UTC | ASoC: mxs: Fix mxs-saif timeout On a mx28evk board the following errors happens on mxs-sgtl5000 probe: [ 0.660000] saif0_clk_set_rate: divider writing timeout [ 0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110 [ 0.670000] ALSA device list: [ 0.680000] No soundcards found. This timeout happens because clk_set_rate will result in writing to the DIV bits of register HW_CLKCTRL_SAIF0 with the saif clock gated (CLKGATE bit set to one). MX28 Reference states the following about CLKGATE: "The DIV field can change ONLY when this clock gate bit field is low." So call clk_prepare_enable prior to clk_set_rate to fix this problem. After this change the mxs-saif driver can be correctly probed and audio is functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 20 January 2012, 18:38:44 UTC |
| fed2200 | Mark Brown | 18 January 2012, 19:17:06 UTC | ASoC: Disable register synchronisation for low frequency WM8996 SYSCLK With a low frequency SYSCLK and a fast I2C clock register synchronisation may occasionally take too long to take effect, causing I/O issues. Disable synchronisation in order to avoid any issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 20 January 2012, 13:54:34 UTC |
| 495174a | Mark Brown | 19 January 2012, 11:16:37 UTC | ASoC: Don't go through cache when applying WM5100 rev A updates These are all to either uncached registers or fixes to register defaults, in the former case the cache won't do anything and in the latter case we're fixing things so the cache sync will do the right thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 20 January 2012, 13:54:33 UTC |
| e53e417 | Mark Brown | 18 January 2012, 20:02:38 UTC | ASoC: Mark WM5100 register map cache only when going into BIAS_OFF Writing to the registers won't work if we do actually manage to hit a fully powered off state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org | 20 January 2012, 13:54:33 UTC |
| 0c93a16 | Wolfram Sang | 18 January 2012, 10:48:59 UTC | ASoC: tlv320aic32x4: always enable analouge block Register LDOCTLEN must always be initialized to clear the analog power control bit, otherwise the analog block will stay deactivated. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 20 January 2012, 13:54:33 UTC |
| 01b37e9 | Wolfram Sang | 18 January 2012, 10:48:58 UTC | ASoC: tlv320aic32x4: always enable dividers Dividers (such as MDAC) are always needed, independent of the codec being I2S master or slave. Needed on a custom board where the codec has to be slave. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 20 January 2012, 13:54:33 UTC |
| bb362e2 | Zeng Zhaoming | 18 January 2012, 05:58:07 UTC | ASoC: sgtl5000: Fix wrong register name in restore Correct SGTL5000_CHIP_CLK_CTRL to SGTL5000_CHIP_REF_CTRL in sgtl5000_restore_regs(), and add comment to explain the restore order. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> | 20 January 2012, 13:54:32 UTC |
| cb0cdeb | Takashi Iwai | 20 January 2012, 11:14:12 UTC | ALSA: hda - Fix a unused variable warning Just overlooked. sound/pci/hda/patch_realtek.c: In function ‘alc_sku_unsol_event’: sound/pci/hda/patch_realtek.c:643:19: warning: unused variable ‘spec’ [-Wunused-variable] Signed-off-by: Takashi Iwai <tiwai@suse.de> | 20 January 2012, 11:14:12 UTC |
| b9ecc4e | Albert Pool | 19 January 2012, 21:08:50 UTC | snd-hda-intel: better Alienware M17x R3 quirk I have been told that this way the rear headphone connector is working as well; with model=alienware only laptop speakers work. The subsystem of both controller and codec is 1028:0490. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 20 January 2012, 09:27:23 UTC |
| dcd6c92 | Linus Torvalds | 19 January 2012, 23:04:48 UTC | Linux 3.3-rc1 | 19 January 2012, 23:04:48 UTC |
| 567e479 | Linus Torvalds | 19 January 2012, 22:53:06 UTC | Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield | 19 January 2012, 22:53:06 UTC |
| 99d1edc | Linus Torvalds | 19 January 2012, 22:52:03 UTC | Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 gpio bug fixes for v3.3 * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: Use correct offset for gpio initialization gpio/it8761e: Restrict it8761e gpio driver to x86. gpio-ml-ioh: cleanup __iomem annotation usage gpio-ml-ioh: cleanup NULL pointer checking gpio-pch: cleanup __iomem annotation usage gpio-pch: cleanup NULL pointer checking | 19 January 2012, 22:52:03 UTC |
| e19c29e | Linus Torvalds | 19 January 2012, 22:49:16 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... vfs: remove printk from set_nlink() wake up s_wait_unfrozen when ->freeze_fs fails | 19 January 2012, 22:49:16 UTC |
| 4f2f81a | H. Peter Anvin | 19 January 2012, 20:41:25 UTC | x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits In checkin 303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com | 19 January 2012, 20:57:09 UTC |
| 282f445 | H. Peter Anvin | 19 January 2012, 20:56:50 UTC | Merge remote-tracking branch 'linus/master' into x86/urgent | 19 January 2012, 20:56:50 UTC |
| afd2909 | Linus Torvalds | 19 January 2012, 19:46:08 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning MPILIB: Add a missing ENOMEM check | 19 January 2012, 19:46:08 UTC |
| 8bc5191 | Al Viro | 19 January 2012, 18:54:36 UTC | qnx4: don't leak ->BitMap on late failure exits Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 19 January 2012, 18:54:36 UTC |
| 4134bf8 | Al Viro | 19 January 2012, 18:40:57 UTC | qnx4: reduce the insane nesting in qnx4_checkroot() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 19 January 2012, 18:40:57 UTC |
| 1aab323 | Al Viro | 19 January 2012, 18:19:42 UTC | qnx4: di_fname is an array, for crying out loud... (struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname is not going to be NULL, TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 19 January 2012, 18:19:42 UTC |
| a730979 | Takashi Iwai | 19 January 2012, 14:03:48 UTC | ALSA: hda/realtek - Remove use_jack_tbl field Now that all quirks have the own unsol handlers, we don't need to check use_jack_tbl flag any more. Let's kill it. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 January 2012, 14:03:48 UTC |
| f21d78e | Takashi Iwai | 19 January 2012, 11:10:29 UTC | ALSA: hda/realtek - Avoid conflict of unsol-events with static quirks The recently added jack-kctl support sets the unsol event tags dynamically, while static quirks usually set the fixed tags in the init_verbs array. Due to this conflict, the own unsol event handler can't retrieve the tag and handle it properly any more. For fixing this, avoid calling snd_hda_jack_add_kctls() for static quirks, and always let them use own handlers instead of the standard one for the auto-pareser. Reported-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 January 2012, 11:10:29 UTC |
| b90bf1d | Takashi Iwai | 19 January 2012, 10:42:55 UTC | ALSA: hda/realtek - Avoid multi-ios conflicting with multi-speakers When a machine has multiple speakers, we don't need to create the controls for multi-ios. Check the number of primary outputs beforehand. Note that this workaround might not work always with new codecs in future; this assumes that both speakers and multi-io jacks share the same mixers/DACs. If they are routed with different mixers, the individual mixer controls should be needed. But, so far, this doesn't happen with the existing ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> | 19 January 2012, 10:42:55 UTC |
| 456a816 | David Howells | 18 January 2012, 10:04:29 UTC | KEYS: Permit key_serial() to be called with a const key pointer Permit key_serial() to be called with a const key pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org> | 19 January 2012, 05:17:35 UTC |
| f6b2457 | Mimi Zohar | 18 January 2012, 10:03:14 UTC | keys: fix user_defined key sparse messages Replace the rcu_assign_pointer() calls with rcu_assign_keypointer(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org> | 19 January 2012, 05:16:29 UTC |
| 3db59dd | Mimi Zohar | 18 January 2012, 03:11:28 UTC | ima: fix cred sparse warning Fix ima_policy.c sparse "warning: dereference of noderef expression" message, by accessing cred->uid using current_cred(). Changelog v1: - Change __cred to just cred (based on David Howell's comment) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> | 19 January 2012, 04:59:11 UTC |
| 90a4c0f | Linus Torvalds | 19 January 2012, 03:26:11 UTC | uml: fix compile for x86-64 Randy Dunlap reports that we get arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value' arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here when compiling UML for x86-64. Stephen Rothwell root-caused it and says: "Caused by commit d7e7528bcd45 ("Audit: push audit success and retcode into arch ptrace.h") (another patch that was never in linux-next :-(). This file now needs protection against double inclusion." so let's do as the man says. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 January 2012, 03:26:11 UTC |
| 4bf1924 | David Howells | 18 January 2012, 10:03:54 UTC | MPILIB: Add a missing ENOMEM check Add a missing ENOMEM check. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> | 19 January 2012, 02:45:51 UTC |
| f59e842 | Linus Torvalds | 19 January 2012, 00:29:42 UTC | Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: ib_srpt: Initial SRP Target merge for v3.3-rc1 | 19 January 2012, 00:29:42 UTC |
| 4ba3069 | Linus Torvalds | 18 January 2012, 23:59:18 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Set additional sense length field in sense data target: Remove legacy device status check from transport_execute_tasks target: Remove __transport_execute_tasks() for each processing context target: Remove extra se_device->execute_task_lock access in fast path target: Drop se_device TCQ queue_depth usage from I/O path target: Fix possible NULL pointer with __transport_execute_tasks target: Remove TFO->check_release_cmd() fabric API caller tcm_fc: Convert ft_send_work to use target_submit_cmd target: Add target_submit_cmd() for process context fabric submission target: Make target_put_sess_cmd use target_release_cmd_kref target: Set response format in INQUIRY response target: tcm_mod_builder: small fixups Documentation/target: Fix tcm_mod_builder.py build breakage target: remove overagressive ____cacheline_aligned annoations tcm_loop: bump max_sectors target/configs: remove trailing newline from udev_path and alias iscsi-target: fix chap identifier simple_strtoul usage target: remove useless casts target: simplify target_check_cdb_and_preempt target: Move core_scsi3_check_cdb_abort_and_preempt ... | 18 January 2012, 23:59:18 UTC |
| 507a03c | Linus Torvalds | 18 January 2012, 23:51:48 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux This includes initial support for the recently published ACPI 5.0 spec. In particular, support for the "hardware-reduced" bit that eliminates the dependency on legacy hardware. APEI has patches resulting from testing on real hardware. Plus other random fixes. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits) acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 ACPI processor: Remove unneeded cpuidle_unregister_driver call intel idle: Make idle driver more robust intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle ACPI: kernel-parameters.txt : Add intel_idle.max_cstate intel_idle: remove redundant local_irq_disable() call ACPI processor: Fix error path, also remove sysdev link ACPI: processor: fix acpi_get_cpuid for UP processor intel_idle: fix API misuse ACPI APEI: Convert atomicio routines ACPI: Export interfaces for ioremapping/iounmapping ACPI registers ACPI: Fix possible alignment issues with GAS 'address' references ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64) ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64) ACPI: Store SRAT table revision ACPI, APEI, Resolve false conflict between ACPI NVS and APEI ACPI, Record ACPI NVS regions ACPI, APEI, EINJ, Refine the fix of resource conflict ... | 18 January 2012, 23:51:48 UTC |
| be40541 | Stefan Berger | 18 January 2012, 03:07:30 UTC | tpm: fix (ACPI S3) suspend regression This patch fixes an (ACPI S3) suspend regression introduced in commit 68d6e6713fcb ("tpm: Introduce function to poll for result of self test") and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers active. The suspend problem occurred if the TPM was disabled and/or deactivated and therefore the TPM_PCRRead checking the result of the (asynchronous) self test returned an error code which then caused the tpm_tis driver to become inactive and this then seemed to have negatively influenced the suspend support by the tpm_infineon driver... Besides that the tpm_tis drive may stay active even if the TPM is disabled and/or deactivated. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 January 2012, 23:50:17 UTC |
| 93c3d65 | Linus Torvalds | 18 January 2012, 23:41:27 UTC | nvme: fix merge error due to change of 'make_request_fn' fn type The type of 'make_request_fn' changed in 5a7bbad27a4 ("block: remove support for bio remapping from ->make_request"), but the merge of the nvme driver didn't take that into account, and as a result the driver would compile with a warning: drivers/block/nvme.c: In function 'nvme_alloc_ns': drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default] include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)' It's benign, but the warning is annoying. Reported-by: Stephen Rothwell <sfr@canb.auug.org> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 January 2012, 23:41:27 UTC |
| 9ef9b20 | Stephen Rothwell | 18 January 2012, 23:24:31 UTC | xen: using EXPORT_SYMBOL requires including export.h Fix these warnings: drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default] drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default] And this build error: ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined! Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 January 2012, 23:37:49 UTC |
| aa303f2 | Linus Torvalds | 18 January 2012, 21:46:13 UTC | Merge branch 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux * 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux: i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH i2c-eg20t: modified the setting of transfer rate. i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number i2c: OMAP: Add DT support for i2c controller I2C: OMAP: NACK without STP I2C: OMAP: correct SYSC register offset for OMAP4 | 18 January 2012, 21:46:13 UTC |
| 4a7c1ff | Linus Torvalds | 18 January 2012, 20:53:54 UTC | Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits) [media] as3645a: Fix compilation by including slab.h [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c [media] ds3000: using logical && instead of bitwise & [media] v4l2-ctrls: make control names consistent [media] DVB: dib0700, add support for Nova-TD LEDs [media] DVB: dib0700, add corrected Nova-TD frontend_attach [media] DVB: dib0700, separate stk7070pd initialization [media] DVB: dib0700, move Nova-TD Stick to a separate set [media] : add MODULE_FIRMWARE to dib0700 [media] DVB-CORE: remove superfluous DTV_CMDs [media] s5p-jpeg: adapt to recent videobuf2 changes [media] s5p-g2d: fixed a bug in controls setting function [media] s5p-mfc: Fix volatile controls setup [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test [media] s5p-fimc: Fix incorrect control ID assignment [media] dvb_frontend: Don't call get_frontend() if idle [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters ... | 18 January 2012, 20:53:54 UTC |
| 9278e63 | Linus Torvalds | 18 January 2012, 20:53:36 UTC | Merge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Wait for WM8993 FLL to stabilise ASoC: core - Free platform DAPM context at platform removal. ASoC: dapm - Fix check for codec context in dapm_power_widgets(). ASoC: sgtl5000: update author email address ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver. | 18 January 2012, 20:53:36 UTC |
| 94bd244 | Laxman Dewangan | 18 January 2012, 14:37:35 UTC | gpio: tps65910: Use correct offset for gpio initialization Using the correct gpio offset for setting the initial value of gpio when setting output direction. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> | 18 January 2012, 20:48:43 UTC |
| d71f5be | Linus Torvalds | 18 January 2012, 20:35:17 UTC | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates on 20120118 * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits) [SCSI] libfc: remove redundant timer init for fcp [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c [SCSI] libfc: Declare local functions static [SCSI] fcoe: fix regression on offload em matching function for initiator/target [SCSI] qla4xxx: Update driver version to 5.02.00-k12 [SCSI] qla4xxx: Cleanup modinfo display [SCSI] qla4xxx: Update license [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init [SCSI] qla4xxx: Added error logging for firmware abort [SCSI] qla4xxx: Disable generating pause frames in case of FW hung [SCSI] qla4xxx: Temperature monitoring for ISP82XX core. [SCSI] megaraid: fix sparse warnings [SCSI] sg: convert to kstrtoul_from_user() [SCSI] don't change sdev starvation list order without request dispatched [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state [SCSI] isci: fix start OOB [SCSI] isci: fix io failures while wide port links are coming up [SCSI] isci: allow more time for wide port targets [SCSI] isci: enable wide port targets [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode. ... | 18 January 2012, 20:35:17 UTC |
| 92b5abb | Linus Torvalds | 18 January 2012, 20:34:09 UTC | Merge git://git.infradead.org/users/willy/linux-nvme * git://git.infradead.org/users/willy/linux-nvme: (105 commits) NVMe: Set number of queues correctly NVMe: Version 0.8 NVMe: Set queue flags correctly NVMe: Simplify nvme_unmap_user_pages NVMe: Mark the end of the sg list NVMe: Fix DMA mapping for admin commands NVMe: Rename IO_TIMEOUT to NVME_IO_TIMEOUT NVMe: Merge the nvme_bio and nvme_prp data structures NVMe: Change nvme_completion_fn to take a dev NVMe: Change get_nvmeq to take a dev instead of a namespace NVMe: Simplify completion handling NVMe: Update Identify Controller data structure NVMe: Implement doorbell stride capability NVMe: Version 0.7 NVMe: Don't probe namespace 0 Fix calculation of number of pages in a PRP List NVMe: Create nvme_identify and nvme_get_features functions NVMe: Fix memory leak in nvme_dev_add() NVMe: Fix calls to dma_unmap_sg NVMe: Correct sg list setup in nvme_map_user_pages ... | 18 January 2012, 20:34:09 UTC |
| ccb19d2 | Linus Torvalds | 18 January 2012, 06:26:41 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) tg3: Fix single-vector MSI-X code openvswitch: Fix multipart datapath dumps. ipv6: fix per device IP snmp counters inetpeer: initialize ->redirect_genid in inet_getpeer() net: fix NULL-deref in WARN() in skb_gso_segment() net: WARN if skb_checksum_help() is called on skb requiring segmentation caif: Remove bad WARN_ON in caif_dev caif: Fix typo in Vendor/Product-ID for CAIF modems bnx2x: Disable AN KR work-around for BCM57810 bnx2x: Remove AutoGrEEEn for BCM84833 bnx2x: Remove 100Mb force speed for BCM84833 bnx2x: Fix PFC setting on BCM57840 bnx2x: Fix Super-Isolate mode for BCM84833 net: fix some sparse errors net: kill duplicate included header net: sh-eth: Fix build error by the value which is not defined net: Use device model to get driver name in skb_gso_segment() bridge: BH already disabled in br_fdb_cleanup() net: move sock_update_memcg outside of CONFIG_INET mwl8k: Fixing Sparse ENDIAN CHECK warning ... | 18 January 2012, 06:26:41 UTC |
| 79ba0db | Len Brown | 18 January 2012, 06:15:54 UTC | Merge branches 'einj', 'intel_idle', 'misc', 'srat' and 'turbostat-ivb' into release | 18 January 2012, 06:15:54 UTC |
| c130bd6 | Tony Luck | 17 January 2012, 20:10:16 UTC | acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec ACPI 5.0 provides extensions to the EINJ mechanism to specify the target for the error injection - by APICID for cpu related errors, by address for memory related errors, and by segment/bus/device/function for PCIe related errors. Also extensions for vendor specific error injections. Tested-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 18 January 2012, 06:14:17 UTC |
| cb79717 | Len Brown | 18 January 2012, 05:46:30 UTC | Merge branch 'atomicio-remove' into release | 18 January 2012, 05:46:30 UTC |
| 037d76f | Len Brown | 18 January 2012, 05:18:10 UTC | Merge branch 'apei' into release | 18 January 2012, 05:18:10 UTC |
| 65b7f83 | Thomas Renninger | 17 January 2012, 21:40:08 UTC | intel_idle: Split up and provide per CPU initialization func Function split up, should have no functional change. Provides entry point for physically hotplugged CPUs to initialize and activate cpuidle. Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> CC: Shaohua Li <shaohua.li@intel.com> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com> | 18 January 2012, 04:59:12 UTC |
| 3bd81a8 | Thomas Renninger | 17 January 2012, 21:40:07 UTC | ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 V2: Fix typo: pr->handle -> pr, here: acpi_processor_hotadd_init(pr) This is a very small part taken from patches which afaik are coming from Yunhong Jiang (for a Xen not a Linus repo?). Cleanup only: no functional change. Advantage (beside cleanup) is that other data of the pr (acpi_processor) struct in the acpi_processor_hotadd_init() is needed later, for example a newly introduced flag: pr->flags.need_hotplug_init Signed-off-by: Thomas Renninger <trenn@suse.de> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> | 18 January 2012, 04:58:07 UTC |
| c3b5003 | Matt Carlson | 17 January 2012, 15:27:23 UTC | tg3: Fix single-vector MSI-X code Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel) enabled. However, kdump only enables one CPU in the new environment, thus causing tg3 to abort MSI-X setup. When the driver attempts to enable INTA or MSI interrupt modes on a kdump kernel, interrupt delivery fails. This patch attempts to workaround the problem by forcing the driver to enable a single MSI-X interrupt. In such a configuration, the device's multivector interrupt mode must be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 January 2012, 04:56:19 UTC |
| 77676fd | Ben Pfaff | 17 January 2012, 13:33:39 UTC | openvswitch: Fix multipart datapath dumps. The logic to split up the list of datapaths into multiple Netlink messages was simply wrong, causing the list to be terminated after the first part. Only about the first 50 datapaths would be dumped. This fixes the problem. Reported-by: Paul Ingram <paul@nicira.com> Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 January 2012, 04:56:19 UTC |
| 766e9f1 | Eric Dumazet | 17 January 2012, 12:45:36 UTC | ipv6: fix per device IP snmp counters In commit 4ce3c183fca (snmp: 64bit ipstats_mib for all arches), I forgot to change the /proc/net/dev_snmp6/xxx output for IP counters. percpu array is 64bit per counter but the folding still used the 'long' variant, and output garbage on 32bit arches. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 January 2012, 04:56:18 UTC |
| 6a48897 | Linus Torvalds | 18 January 2012, 02:55:56 UTC | Merge tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc ARM: fixes for ARM platforms Some fallout from the 3.3. merge window as well as a couple bug fixes for older preexisting bugs that seem valid to include at this time: * sched_clock changes broke picoxcell, fix included * BSYM bugs causing issues with thumb2-built kernels on SMP * Missing module.h include on msm. * A collection of bugfixes for samsung platforms that didn't make it into the first pull requests. * tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: make BSYM macro assembly only ARM: highbank: remove incorrect BSYM usage ARM: imx: remove incorrect BSYM usage ARM: exynos: remove incorrect BSYM usage ARM: ux500: add missing ENDPROC to headsmp.S ARM: msm: Add missing ENDPROC to headsmp.S ARM: versatile: Add missing ENDPROC to headsmp.S ARM: EXYNOS: Invert VCLK polarity for framebuffer on ORIGEN ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore ARM: S3C64XX: Remove hsmmc1 from Cragganmore ARM: S3C64XX: Remove unconditional power domain disables ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h ARM: SAMSUNG: dma-ops.h needs mach/dma.h ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h ARM: picoxcell: fix sched_clock() cleanup fallout ARM: msm: vreg is a module and so needs module.h | 18 January 2012, 02:55:56 UTC |
| 57f2685 | Linus Torvalds | 18 January 2012, 02:40:24 UTC | Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them. | 18 January 2012, 02:40:24 UTC |
| 488a9d0 | Linus Torvalds | 18 January 2012, 02:11:38 UTC | Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev * 'upstream-linus' of git://github.com/jgarzik/libata-dev: [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken suspend functionality. [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list [libata] pata_bf54x: Support sg list in bmdma transfer. [libata] sata_fsl: fix the controller operating mode [libata] enable ata port async suspend | 18 January 2012, 02:11:38 UTC |
| 6015ff1 | Al Viro | 18 January 2012, 01:51:22 UTC | x86-32: Fix build failure with AUDIT=y, AUDITSYSCALL=n JONGMAN HEO reports: With current linus git (commit a25a2b84), I got following build error, arch/x86/kernel/vm86_32.c: In function 'do_sys_vm86': arch/x86/kernel/vm86_32.c:340: error: implicit declaration of function '__audit_syscall_exit' make[3]: *** [arch/x86/kernel/vm86_32.o] Error 1 OK, I can reproduce it (32bit allmodconfig with AUDIT=y, AUDITSYSCALL=n) It's due to commit d7e7528bcd45: "Audit: push audit success and retcode into arch ptrace.h". Reported-by: JONGMAN HEO <jongman.heo@samsung.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 January 2012, 02:10:11 UTC |
| b73fa46 | Benjamin Larsson | 07 January 2012, 23:39:10 UTC | [libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken suspend functionality. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 18 January 2012, 01:50:53 UTC |
| 3a25179 | Vladimir LAVALLADE | 08 January 2012, 12:50:13 UTC | [libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk list Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 18 January 2012, 01:50:07 UTC |
| 81b0287 | Sonic Zhang | 04 January 2012, 06:06:51 UTC | [libata] pata_bf54x: Support sg list in bmdma transfer. BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered in one ATAPI transfer. So, set the max sg_tablesize to 4. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 18 January 2012, 01:49:28 UTC |
| 93272b1 | Jerry Huang | 20 December 2011, 06:50:27 UTC | [libata] sata_fsl: fix the controller operating mode Configure the FSL SATA controller to the preferred, enterprise mode. Signed-off-by: Yutaka Ando <r46913@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 18 January 2012, 01:49:07 UTC |
| 966f121 | Lin Ming | 16 January 2012, 05:23:23 UTC | [libata] enable ata port async suspend This saves devices suspend/resume time. Tested system suspend/resume with SATA IDE/AHCI mode 3 times. Below is the time took for devices suspend/resume. SATA mode vanilla-kernel patched-kernel --------- --------------------- --------------------- IDE suspend: 0.744 suspend: 0.432 (0.716, 0.768, 0.748) (0.440, 0.428, 0.428) resume: 5.084 resume: 2.209 (5.100, 5.064, 5.088) (2.168, 2.232, 2.228) AHCI: suspend: 0.725 suspend: 0.449 (0.740, 0.708, 0.728) (0.456, 0.448, 0.444) resume: 2.556 resume: 1.896 (2.604, 2.492, 2.572) (1.932, 1.872, 1.884) Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> | 18 January 2012, 01:48:06 UTC |
| 36be126 | Laurent Pinchart | 08 January 2012, 23:18:19 UTC | [media] as3645a: Fix compilation by including slab.h The as3645a driver calls kzalloc(). Include slab.h. Reported-by: Fredrik Lingvall <fredrik.lingvall@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:07:13 UTC |
| a2e2baa | Sachin Kamat | 17 January 2012, 07:55:25 UTC | [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:06:24 UTC |
| 2bd4334 | Sachin Kamat | 17 January 2012, 07:52:41 UTC | [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:06:13 UTC |
| 3a9888f | Dan Carpenter | 17 January 2012, 06:28:51 UTC | [media] ds3000: using logical && instead of bitwise & The intent here was to test if the FE_HAS_LOCK was set. The current test is equivalent to "if (status) { ..." Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:05:13 UTC |
| f08aacf | Hans Verkuil | 16 January 2012, 15:27:15 UTC | [media] v4l2-ctrls: make control names consistent Several control names used inconsistent capitalization or were inconsistent in other ways. I also corrected a spelling mistake and fixed four strings that were too long (>31 characters). Harmless, but the string is cut off when it is returned with QUERYCTRL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:04:05 UTC |
| d43272a | Jiri Slaby | 10 January 2012, 17:11:25 UTC | [media] DVB: dib0700, add support for Nova-TD LEDs Add an override of read_status to intercept lock status. This allows us to switch LEDs appropriately on and off with signal un/locked. The second phase is to override sleep to properly turn off both. This is a hackish way to achieve that. Thanks to Mike Krufky for his help. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:02:41 UTC |
| 2b05b88 | Jiri Slaby | 10 January 2012, 17:11:24 UTC | [media] DVB: dib0700, add corrected Nova-TD frontend_attach This means cut & paste from the former f. attach. But while at it write to the right GPIO to turn on the right LED. Also turn the other two off jsut for sure. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:02:15 UTC |
| 52fd5b2 | Jiri Slaby | 10 January 2012, 17:11:23 UTC | [media] DVB: dib0700, separate stk7070pd initialization The start is common for both stk7070pd and novatd specific routine. This is just a preparation for the next patch. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:01:55 UTC |
| 9b6ba57 | Jiri Slaby | 10 January 2012, 17:11:22 UTC | [media] DVB: dib0700, move Nova-TD Stick to a separate set To properly support the three LEDs which are on the stick, we need a special handling in the ->frontend_attach function. Thus let's have a separate ->frontend_attach instead of ifs in the common one. The hadnling itself will be added in further patches. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 18 January 2012, 01:01:23 UTC |
