b5ad2c2 | Markos Chandras | 15 January 2015, 10:28:29 UTC | MIPS: mm: scache: Add secondary cache support for MIPS R6 cores The secondary cache initialization and configuration code is processor specific so we need to handle MIPS R6 cores as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:31 UTC |
4ee4862 | Markos Chandras | 02 December 2014, 15:30:19 UTC | MIPS: mm: c-r4k: Set the correct ISA level The local_r4k_flush_cache_sigtramp function uses the 'cache' instruction inside an asm block. However, MIPS R6 changed the opcode for the cache instruction and as a result of which we need to set the correct ISA level. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:31 UTC |
77f3ee5 | Leonid Yegoshin | 24 November 2014, 15:42:46 UTC | MIPS: mm: tlbex: Use cpu_has_mips_r2_exec_hazard for the EHB instruction MIPS uses the cpu_has_mips_r2_exec_hazard macro to determine whether the EHB instruction is available or not. This is necessary for MIPS R6 which also supports the EHB instruction. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:30 UTC |
d2e6d30 | Markos Chandras | 19 November 2014, 09:39:56 UTC | MIPS: mm: page: Add MIPS R6 support The MIPS R6 pref instruction only has 9 bits for the immediate field so skip the micro-assembler PREF instruction if the offset does not fit in 9 bits. Moreover, bit 30 (Pref_PrepareForStore) is no longer valid in MIPS R6, so we change the default for all MIPS R6 processors to bit 5 (Pref_StoreStreamed). Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:30 UTC |
8c56208 | Leonid Yegoshin | 18 November 2014, 09:04:34 UTC | MIPS: lib: memset: Add MIPS R6 support MIPS R6 dropped the unaligned load and store instructions so we need to re-write this part of the code for R6 to store one byte at a time. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:30 UTC |
b0ce4bd | Leonid Yegoshin | 14 November 2014, 11:55:50 UTC | MIPS: lib: memcpy: Add MIPS R6 support MIPS R6 does not support the unaligned load and store instructions so we add a special MIPS R6 case to copy one byte at a time if we need to read/write to unaligned memory addresses. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:29 UTC |
fee313d | Markos Chandras | 15 January 2015, 10:34:00 UTC | MIPS: kernel: syscall: Set the appropriate ISA level for MIPS R6 MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:29 UTC |
0593a44 | Leonid Yegoshin | 28 October 2014, 10:42:23 UTC | MIPS: kernel: unaligned: Add support for the MIPS R6 The load/store unaligned instructions have been removed in MIPS R6 so we need to re-implement the related macros using the regular load/store instructions. Moreover, the load/store from coprocessor 2 instructions have been reallocated in Release 6 so we will handle them in the emulator instead. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:28 UTC |
acac410 | Markos Chandras | 24 November 2014, 14:40:11 UTC | MIPS: kernel: cps-vec: Replace "addi" with "addiu" The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:28 UTC |
938c128 | Markos Chandras | 24 November 2014, 13:17:27 UTC | MIPS: kernel: genex: Set correct ISA level The jr instruction opcode has changed in R6 so make sure the correct ISA level is set prior using that instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:28 UTC |
8d5b9b7 | Leonid Yegoshin | 25 November 2014, 10:08:45 UTC | MIPS: kernel: r4k_fpu: Add support for MIPS R6 Add the MIPS R6 related preprocessor definitions for FPU signal related functions. MIPS R6 only has FR=1 so avoid checking that bit on the C0/Status register. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:27 UTC |
207083b | Leonid Yegoshin | 24 November 2014, 11:54:19 UTC | MIPS: kernel: r4k_switch: Add support for MIPS R6 Add the MIPS R6 related preprocessor definitions for save/restore FPU related functions. We also set the appropriate ISA level so the final return instruction "jr ra" will produce the correct opcode on R6. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:27 UTC |
9c7d576 | Leonid Yegoshin | 14 November 2014, 11:25:30 UTC | MIPS: kernel: traps: Add MIPS R6 related definitions Add MIPS R6 support to cache and ftlb exceptions, as well as to the hwrena and ebase register configuration. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:27 UTC |
515a639 | Markos Chandras | 14 November 2014, 10:10:02 UTC | MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfo Print 'mips64r6' and/or 'mips32r6' if the kernel is running on a MIPS R6 core. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:26 UTC |
6ebb496 | Markos Chandras | 14 November 2014, 10:05:41 UTC | MIPS: kernel: entry.S: Add MIPS R6 related definitions The instruction hazard barrier in the form of: jr.hb ra nop is valid on MIPS R6 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:26 UTC |
8b8aa63 | Leonid Yegoshin | 13 November 2014, 13:51:51 UTC | MIPS: kernel: cpu-probe.c: Add support for MIPS R6 Add MIPS R6 support when decoding the config0 c0 register. Also add MIPS R6 support when examining the ebase c0 register to get the core number and when getting the shadow set number from the srsctl c0 register. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:25 UTC |
54dac95 | Leonid Yegoshin | 13 November 2014, 13:39:39 UTC | MIPS: kernel: cevt-r4k: Add MIPS R6 to the c0_compare_interrupt handler Just like MIPS R2, in MIPS R6 it is possible to determine if a timer interrupt has happened or not. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:25 UTC |
180b1e3 | Leonid Yegoshin | 24 November 2014, 09:59:02 UTC | MIPS: kernel: cpu-bugs64: Do not check R6 cores for existing 64-bit bugs The current HW bugs checked in cpu-bugs64, do not apply to R6 cores and they cause compilation problems due to removed <R6 instructions, so do not check for them for the time being. Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:24 UTC |
82e7ce8 | Markos Chandras | 15 January 2015, 10:31:36 UTC | MIPS: asm: local: Set the appropriate ISA level for MIPS R6 MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:24 UTC |
5753762 | Markos Chandras | 24 November 2014, 14:11:39 UTC | MIPS: asm: spinlock: Replace "sub" instruction with "addiu" "sub $reg, imm" is not a real MIPS instruction. The assembler can replace that with "addi $reg, -imm". However, addi has been removed from R6, so we replace the "sub" instruction with the "addiu" one. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:23 UTC |
1922c35 | Markos Chandras | 19 November 2014, 11:09:55 UTC | MIPS: asm: futex: Set the appropriate ISA level for MIPS R6 MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:23 UTC |
87a927e | Markos Chandras | 20 November 2014, 13:58:30 UTC | MIPS: asm: bitops: Update ISA constraints for MIPS R6 support MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:22 UTC |
0038df2 | Markos Chandras | 06 January 2015, 11:09:24 UTC | MIPS: asm: atomic: Update ISA constraints for MIPS R6 support MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:22 UTC |
fa998eb | Markos Chandras | 20 November 2014, 13:31:48 UTC | MIPS: asm: cmpxchg: Update ISA constraints for MIPS R6 support MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:22 UTC |
123e4b3 | Markos Chandras | 19 December 2014, 12:04:46 UTC | MIPS: Use the new "ZC" constraint for MIPS R6 GCC versions supporting MIPS R6 use the ZC constraint to enforce a 9-bit offset for MIPS R6. We will use that for all MIPS R6 LL/SC instructions. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:21 UTC |
94bfb75 | Markos Chandras | 26 January 2015, 12:44:11 UTC | MIPS: asm: Rename GCC_OFF12_ASM to GCC_OFF_SMALL_ASM The GCC_OFF12_ASM macro is used for 12-bit immediate constrains but we will also use it for 9-bit constrains on MIPS R6 so we rename it to something more appropriate. Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:21 UTC |
a7e07b1 | Markos Chandras | 13 November 2014, 13:32:03 UTC | MIPS: asm: spram: Add new symbol for MIPS scratch pad storage MIPS R6, just like MIPS R2, have scratch pad storage, so add a new symbol which is selected by MIPS R2 and R6. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00389.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:20 UTC |
934c792 | Markos Chandras | 13 November 2014, 13:25:51 UTC | MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions MIPS R6 changed the 'cache' instruction opcode and reduced the offset field to 8 bits. This means we now have to adjust the base register every 256 bytes and as a result of which we can no longer use the previous cache functions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:20 UTC |
8716a76 | Markos Chandras | 13 November 2014, 11:54:31 UTC | MIPS: asm: irqflags: Add MIPS R6 related definitions Add the MIPS R6 related definitions to the IRQ related macros Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:20 UTC |
f52fca9 | Markos Chandras | 13 November 2014, 11:52:22 UTC | MIPS: asm: hazards: Add MIPSR6 definitions Add the MIPSR6 related definitions to MIPS hazards Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:19 UTC |
34c56fc | Leonid Yegoshin | 13 November 2014, 11:49:21 UTC | MIPS: asm: cpu: Add MIPSR6 ISA definitions Add MIPS R6 to the ISA definitions Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:19 UTC |
4e0748f | Markos Chandras | 13 November 2014, 11:25:27 UTC | MIPS: Use generic checksum functions for MIPS R6 The following instructions have been removed from MIPS R6 ulw, ulh, swl, lwr, lwl, swr. However, all of them are used in the MIPS specific checksum implementation. As a result of which, we will use the generic checksum on MIPS R6 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:19 UTC |
98a833c | Markos Chandras | 05 November 2014, 14:17:52 UTC | MIPS: asm: asmmacro: Replace "add" instructions with "addu" The "add" instruction is actually a macro in binutils and depending on the size of the immediate it can expand to an "addi" instruction. However, the "addi" instruction traps on overflows which is not something we want on address calculation. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00121.html Cc: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:18 UTC |
226da55 | Leonid Yegoshin | 05 November 2014, 12:56:40 UTC | MIPS: asm: asmmacro: Add MIPS R6 support to the simple EI/DI variants EI/DI instructions are available in MIPS R6 so add the needed definitions. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:18 UTC |
6a0e986 | Leonid Yegoshin | 27 October 2014, 11:37:47 UTC | MIPS: asm: stackframe: Do not preserve the HI/LO registers on MIPS R6 The HI/LO registers have been removed from MIPS R6. Instructions such as MULT and DIV have been replaced with a new pair of instructions for the HI/LO operations for example: MULT -> MUL, MUH DIV -> DIV, MOD So we avoid preserving the pre-R6 HI/LO registers in MIPS R6 Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:17 UTC |
b840a82 | Leonid Yegoshin | 27 October 2014, 11:23:34 UTC | MIPS: asm: module: define MODULE_PROC_FAMILY for MIPS R6 Define the MODULE_PROC_FAMILY for the MIPS R6 ISA. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:17 UTC |
be51369 | Markos Chandras | 18 November 2014, 15:02:32 UTC | MIPS: asm: compiler: Add new macros to set ISA and arch asm annotations There are certain places where the code uses .set mips32 or .set mips64 or .set arch=r4000. In preparation of MIPS R6 support, and in order to use as less #ifdefs as possible, we define new macros to set similar annotations for MIPS R6. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 17 February 2015, 15:37:14 UTC |
a168b8f | Leonid Yegoshin | 19 November 2014, 09:29:42 UTC | MIPS: mm: Add MIPS R6 instruction encodings MIPS R6 defines new opcodes for ll, sc, cache and pref instructions so we need to take these into consideration in the micro-assembler. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 16 February 2015, 14:02:50 UTC |
51eec48 | Leonid Yegoshin | 18 November 2014, 16:24:15 UTC | MIPS: mm: uasm: Add signed 9-bit immediate related macros MIPS R6 redefines several instructions and reduces the immediate field to 9-bits so add related macros for the microassembler. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 16 February 2015, 10:01:25 UTC |
7fd08ca | Leonid Yegoshin | 27 October 2014, 10:34:11 UTC | MIPS: Add build support for the MIPS R6 ISA Add build support for the latest revision (R6) of the MIPS ISA. microMIPS is not yet supported. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00386.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 16 February 2015, 10:01:25 UTC |
b2498af | Leonid Yegoshin | 24 November 2014, 12:59:44 UTC | MIPS: Add MIPS generic QEMU probe support Add a case in cpu_probe_mips for the MIPS generic QEMU processor ID. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 16 February 2015, 10:01:24 UTC |
4695089 | Leonid Yegoshin | 24 November 2014, 12:59:01 UTC | MIPS: Add cases for CPU_QEMU_GENERIC Add a CPU_QEMU_GENERIC case to various switch statements. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 16 February 2015, 10:01:24 UTC |
aca5721 | Leonid Yegoshin | 27 October 2014, 10:12:23 UTC | MIPS: Add generic QEMU PRid and cpu type identifiers Latest versions of QEMU added support for mips32r6-generic and mips64r6-generic cpu types so add related definitions in preparation of MIPS R6 support. This is also used for QEMU R2 generic cpus. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> | 16 February 2015, 10:01:24 UTC |
b3e76c4 | Markos Chandras | 02 February 2015, 15:41:01 UTC | MIPS: Makefile: Move the ASEs checks after setting the core's CFLAGS We need to check the ASEs support against the core's CFLAGS instead of depending to the default -march option from the toolchain. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9180/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 February 2015, 09:55:26 UTC |
ed4cbc8 | Markos Chandras | 26 January 2015, 13:04:33 UTC | MIPS: HTW: Prevent accidental HTW start due to nested htw_{start, stop} activate_mm() and switch_mm() call get_new_mmu_context() which in turn can enable the HTW before the entryhi is changed with the new ASID. Since the latter will enable the HTW in local_flush_tlb_all(), then there is a small timing window where the HTW is running with the new ASID but with an old pgd since the TLBMISS_HANDLER_SETUP_PGD hasn't assigned a new one yet. In order to prevent that, we introduce a simple htw counter to avoid starting HTW accidentally due to nested htw_{start,stop}() sequences. Moreover, since various IPI calls can enforce TLB flushing operations on a different core, such an operation may interrupt another htw_{stop,start} in progress leading inconsistent updates of the htw_seq variable. In order to avoid that, we disable the interrupts whenever we update that variable. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9118/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 February 2015, 09:55:26 UTC |
fde3538 | Markos Chandras | 26 January 2015, 09:40:36 UTC | MIPS: asm: pgtable: Prevent HTW race when updating PTEs Whenever we modify a page table entry, we need to ensure that the HTW will not fetch a stable entry. And for that to happen we need to ensure that HTW is stopped before we modify the said entry otherwise the HTW may already be in the process of reading that entry and fetching the old information. As a result of which, we replace the htw_reset() calls with htw_{stop,start} in more appropriate places. This also removes the remaining users of htw_reset() and as a result we drop that macro Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9116/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 February 2015, 09:55:26 UTC |
461d159 | Markos Chandras | 26 January 2015, 09:40:34 UTC | MIPS: asm: pgtable: Add c0 hazards on HTW start/stop sequences When we use htw_{start,stop}() outside of htw_reset(), we need to ensure that c0 changes have been propagated properly before we attempt to continue with subsequence memory operations. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9114/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 February 2015, 09:55:26 UTC |
d79d853 | Markos Chandras | 21 January 2015, 10:54:46 UTC | MIPS: mm: Add debug information for userland SIGSEGV signals. Commit 41c594ab65fc ("[MIPS] MT: Improved multithreading support.") removed useful debug information for userland segmentation faults. This patch bring this back along with the ability to determine the name of the object file where the EPC and RA registers point at. Furthermore, we select the SYSCTL_EXCEPTION_TRACE symbol for MIPS which is the de facto solution to turn userland exception logging on and off via the /proc/sys/debug/exception-trace file. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9089/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 February 2015, 09:55:26 UTC |
9791554 | Paul Burton | 08 January 2015, 12:17:37 UTC | MIPS,prctl: add PR_[GS]ET_FP_MODE prctl options for MIPS Userland code may be built using an ABI which permits linking to objects that have more restrictive floating point requirements. For example, userland code may be built to target the O32 FPXX ABI. Such code may be linked with other FPXX code, or code built for either one of the more restrictive FP32 or FP64. When linking with more restrictive code, the overall requirement of the process becomes that of the more restrictive code. The kernel has no way to know in advance which mode the process will need to be executed in, and indeed it may need to change during execution. The dynamic loader is the only code which will know the overall required mode, and so it needs to have a means to instruct the kernel to switch the FP mode of the process. This patch introduces 2 new options to the prctl syscall which provide such a capability. The FP mode of the process is represented as a simple bitmask combining a number of mode bits mirroring those present in the hardware. Userland can either retrieve the current FP mode of the process: mode = prctl(PR_GET_FP_MODE); or modify the current FP mode of the process: err = prctl(PR_SET_FP_MODE, new_mode); Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8899/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 12 February 2015, 11:30:29 UTC |
ae58d88 | James Hogan | 19 January 2015, 12:00:55 UTC | MIPS: cevt-r4k: Drop GIC special case The cevt-r4k driver used to call into the GIC driver to find whether the timer was pending, but only with External Interrupt Controller (EIC) mode, where the Cause.IP bits can't be used as they encode the interrupt priority level (Cause.RIPL) instead. However commit e9de688dac65 ("irqchip: mips-gic: Support local interrupts") changed the condition from cpu_has_veic to gic_present. This fails on cores such as P5600 which have a GIC but the local interrupts aren't routable by the GIC, causing c0_compare_int_usable() to consider the interrupt unusable so r4k_clockevent_init() fails. The previous behaviour, added in commit 98b67c37db33 ("MIPS: Add EIC support for GIC."), wasn't really correct either as far as I can tell, since P5600 apparently supports EIC mode too, and in any case the use of Cause.TI with r2 should have been sufficient anyway since commit 010c108d7af7 ("MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQs"). Therefore drop the call into the gic driver altogether, and add a comment in c0_compare_int_pending() to clarify that Cause.TI does get checked since MIPS r2. Signed-off-by: James Hogan <james.hogan@imgtec.com> Fixes: e9de688dac65 ("irqchip: mips-gic: Support local interrupts") Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Steven J. Hill <steven.hill@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9077/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 05 February 2015, 13:56:53 UTC |
2d76e96 | Ralf Baechle | 04 February 2015, 12:04:03 UTC | MIPS: elf2ecoff: Fix warning due to dead code. HOSTCC arch/mips/boot/elf2ecoff arch/mips/boot/elf2ecoff.c: In function ‘main’: arch/mips/boot/elf2ecoff.c:271:8: warning: variable ‘shstrtab’ set but not used [-Wunused-but-set-variable] char *shstrtab; Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 04 February 2015, 13:42:27 UTC |
7b09777 | Rob Herring | 10 January 2015, 02:34:36 UTC | MIPS: Add struct pci_ops member names to initialization Some instances of pci_ops initialization rely on the read/write members' location in the struct. This is fragile and may break when adding new members to the beginning of the struct. [ralf@linux-mips.org: indent = with tabs for consistency.] Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Patchwork: https://patchwork.linux-mips.org/patch/8915/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 January 2015, 14:04:38 UTC |
250215c | Geert Uytterhoeven | 12 January 2015, 20:19:13 UTC | MIPS: Remove unused dt_setup_arch() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8928/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 16 January 2015, 12:10:42 UTC |
e950324 | Ralf Baechle | 02 January 2015, 15:00:58 UTC | MIPS: ARC: Add declarations for a few missing ARC firmware functions. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:28 UTC |
bb03006 | Ralf Baechle | 02 January 2015, 14:59:06 UTC | MIPS: ARC: Use __noreturn instead of open coded attributes in declarations. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:28 UTC |
dd6e2db | Ralf Baechle | 02 January 2015, 14:57:40 UTC | MIPS: IP27: Use __noreturn instead of open coded attributes in declarations. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:28 UTC |
efc46d1 | Ralf Baechle | 02 January 2015, 14:56:28 UTC | MIPS: IP32: Use __noreturn instead of open coded attributes in declarations. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:28 UTC |
7f84c0a | Ralf Baechle | 02 January 2015, 16:16:24 UTC | MIPS: ARC: Use __noreturn / unreachable in ARC termination functions. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
2f26c48 | Ralf Baechle | 17 December 2014, 22:05:10 UTC | MIPS: Use generic csum_tcpudp_magic for MIPS. Its implementation is identical to MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
b4b5015 | Ralf Baechle | 17 December 2014, 22:03:46 UTC | MIPS: Use <asm-generic/checksum.h> Right now the MIPS <asm/checksum.h> still overrides all functions. This will change in the future. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
d0f0f63 | Ralf Baechle | 17 December 2014, 13:06:00 UTC | MIPS: Rewrite csum_fold to plain C. This isn't only short and easier to read and fully portable but also shrinks a Malta kernel's by 160 bytes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> | 13 January 2015, 15:04:27 UTC |
eaa27f3 | Linus Torvalds | 11 January 2015, 20:44:53 UTC | linux 3.19-rc4 | 11 January 2015, 20:44:53 UTC |
0cbaed1 | Linus Torvalds | 11 January 2015, 20:44:10 UTC | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm Pull ARM fixes from Russell King: "Three small fixes from over the Christmas period, and wiring up the new execveat syscall for ARM" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region ARM: 8249/1: mm: dump: don't skip regions ARM: wire up execveat syscall | 11 January 2015, 20:44:10 UTC |
505569d | Linus Torvalds | 11 January 2015, 19:53:46 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix with certain odd memory mappings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Use asm volatile in __getcpu x86/build: Clean auto-generated processor feature files x86: Fix mkcapflags.sh bash-ism x86: Fix step size adjustment during initial memory mapping x86_64, vdso: Fix the vdso address randomization algorithm | 11 January 2015, 19:53:46 UTC |
5ab551d | Linus Torvalds | 11 January 2015, 19:51:49 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: group scheduling corner case fix, two deadline scheduler fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs system fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group() sched/deadline: Avoid double-accounting in case of missed deadlines sched/deadline: Fix migration of SCHED_DEADLINE tasks sched: Fix odd values in effective_load() calculations sched, fanotify: Deal with nested sleeps sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation | 11 January 2015, 19:51:49 UTC |
ddb321a | Linus Torvalds | 11 January 2015, 19:47:45 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also some kernel side fixes: uncore PMU driver fix, user regs sampling fix and an instruction decoder fix that unbreaks PEBS precise sampling" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes perf/x86_64: Improve user regs sampling perf: Move task_pt_regs sampling into arch code x86: Fix off-by-one in instruction decoder perf hists browser: Fix segfault when showing callchain perf callchain: Free callchains when hist entries are deleted perf hists: Fix children sort key behavior perf diff: Fix to sort by baseline field by default perf list: Fix --raw-dump option perf probe: Fix crash in dwarf_getcfi_elf perf probe: Fix to fall back to find probe point in symbols perf callchain: Append callchains only when requested perf ui/tui: Print backtrace symbols when segfault occurs perf report: Show progress bar for output resorting | 11 January 2015, 19:47:45 UTC |
1e6c3e8 | Linus Torvalds | 11 January 2015, 19:46:31 UTC | Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "A liblockdep fix and a mutex_unlock() mutex-debugging fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Always clear owner field upon mutex_unlock() tools/liblockdep: Fix debug_check thinko in mutex destroy | 11 January 2015, 19:46:31 UTC |
b800c91 | Konstantin Khlebnikov | 11 January 2015, 13:54:06 UTC | mm: fix corner case in anon_vma endless growing prevention Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel BUG at mm/rmap.c:399!") caused by commit 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Anon_vma_clone() is usually called for a copy of source vma in destination argument. If source vma has anon_vma it should be already in dst->anon_vma. NULL in dst->anon_vma is used as a sign that it's called from anon_vma_fork(). In this case anon_vma_clone() finds anon_vma for reusing. Vma_adjust() calls it differently and this breaks anon_vma reusing logic: anon_vma_clone() links vma to old anon_vma and updates degree counters but vma_adjust() overrides vma->anon_vma right after that. As a result final unlink_anon_vmas() decrements degree for wrong anon_vma. This patch assigns ->anon_vma before calling anon_vma_clone(). Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-and-tested-by: Chris Clayton <chris2553@googlemail.com> Reported-and-tested-by: Oded Gabbay <oded.gabbay@amd.com> Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # to match back-porting of 7a3ef208e662 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 January 2015, 19:45:10 UTC |
690eac5 | Linus Torvalds | 11 January 2015, 19:33:57 UTC | mm: Don't count the stack guard page towards RLIMIT_STACK Commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page") made sure that we return the error properly for stack growth conditions. It also theorized that counting the guard page towards the stack limit might break something, but also said "Let's see if anybody notices". Somebody did notice. Apparently android-x86 sets the stack limit very close to the limit indeed, and including the guard page in the rlimit check causes the android 'zygote' process problems. So this adds the (fairly trivial) code to make the stack rlimit check be against the actual real stack size, rather than the size of the vma that includes the guard page. Reported-and-tested-by: Chih-Wei Huang <cwhuang@android-x86.org> Cc: Jay Foad <jay.foad@gmail.com> Cc: stable@kernel.org # to match back-porting of fee7e49d4514 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 January 2015, 19:33:57 UTC |
8e654dd | Ingo Molnar | 11 January 2015, 08:18:05 UTC | Merge branch 'core/urgent' into locking/urgent, to collect all pending locking fixes Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 January 2015, 08:18:05 UTC |
4850d37 | Linus Torvalds | 10 January 2015, 20:23:03 UTC | Merge tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio Pull VFIO fix from Alex Williamson: "Fix PCI header check in vfio_pci_probe() (Wei Yang)" * tag 'vfio-v3.19-rc4' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix the check on pci device type in vfio_pci_probe() | 10 January 2015, 20:23:03 UTC |
aff8ad5 | Linus Torvalds | 10 January 2015, 19:59:25 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "Just one fix: a qlogic busy wait regression" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: qla2xxx: fix busy wait regression | 10 January 2015, 19:59:25 UTC |
eb74926 | Linus Torvalds | 10 January 2015, 05:23:27 UTC | Merge tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All a few small regression or stable fixes: a Nvidia HDMI ID addition, a regression fix for CAIAQ stream count, a typo fix for GPIO setup with STAC/IDT HD-audio codecs, and a Fireworks big-endian fix" * tag 'sound-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fireworks: fix an endianness bug for transaction length ALSA: hda - Add new GPU codec ID 0x10de0072 to snd-hda ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs ALSA: snd-usb-caiaq: fix stream count check | 10 January 2015, 05:23:27 UTC |
28023d2 | Linus Torvalds | 10 January 2015, 05:18:48 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - bounds checking fixes in logitech and roccat drivers, from Peter Wu and Dan Carpenter - double-kfree fix in i2c-hid driver on bus shutdown, from Mika Westerberg - a couple of various small driver fixes - a few device id additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: roccat: potential out of bounds in pyra_sysfs_write_settings() HID: Add a new id 0x501a for Genius MousePen i608X HID: logitech-hidpp: prefix the name with "Logitech" HID: logitech-hidpp: avoid unintended fall-through HID: Allow HID_BATTERY_STRENGTH to be enabled HID: i2c-hid: Do not free buffers in i2c_hid_stop() HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard HID: logitech-hidpp: check WTP report length HID: logitech-dj: check report length | 10 January 2015, 05:18:48 UTC |
1dd34da | Linus Torvalds | 10 January 2015, 05:13:34 UTC | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "I'm briefly working between holidays and LCA, so this is close to a couple of weeks of fixes, Two sets of amdkfd fixes, this is a new feature this kernel, and this pull fixes a few issues since it got merged, ordering when built-in to kernel and also the iommu vs gpu ordering patch, it also reworks the ioctl before the initial release. Otherwise: - radeon: some misc fixes all over, hdmi, 4k, dpm - nouveau: mcp77 init fixes, oops fix, bug on fix, msi fix - i915: power fixes, revert VGACNTR patch Probably be quiteer next week since I'll be at LCA anyways" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits) drm/amdkfd: rewrite kfd_ioctl() according to drm_ioctl() drm/amdkfd: reformat IOCTL definitions to drm-style drm/amdkfd: Do copy_to/from_user in general kfd_ioctl() drm/radeon: integer underflow in radeon_cp_dispatch_texture() drm/radeon: adjust default bapm settings for KV drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw drm/radeon: fix sad_count check for dce3 drm/radeon: KV has three PPLLs (v2) drm/amdkfd: unmap VMID<-->PASID when relesing VMID (non-HWS) drm/radeon: Init amdkfd only if it was compiled amdkfd: actually allocate longs for the pasid bitmask drm/nouveau/nouveau: Do not BUG_ON(!spin_is_locked()) on UP drm/nv4c/mc: disable msi drm/nouveau/fb/ram/mcp77: enable NISO poller drm/nouveau/fb/ram/mcp77: use carveout reg to determine size drm/nouveau/fb/ram/mcp77: subclass nouveau_ram drm/nouveau: wake up the card if necessary during gem callbacks drm/nouveau/device: Add support for GK208B, resolves bug 86935 drm/nouveau: fix missing return statement in nouveau_ttm_tt_unpopulate drm/nouveau/bios: fix oops on pre-nv50 chipsets ... | 10 January 2015, 05:13:34 UTC |
d80b34c | Linus Torvalds | 10 January 2015, 04:57:58 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Here is a handful of minor arm64 fixes discovered and fixed over the Christmas break. The main part is adding some missing #includes that we seem to be getting transitively but have started causing problems in -next. - Fix early mapping fixmap corruption by EFI runtime services - Fix __NR_compat_syscalls off-by-one - Add missing sanity checks for some 32-bit registers - Add some missing #includes which we get transitively - Remove unused prepare_to_copy() macro" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/efi: add missing call to early_ioremap_reset() arm64: fix missing asm/io.h include in kernel/smp_spin_table.c arm64: fix missing asm/alternative.h include in kernel/module.c arm64: fix missing linux/bug.h include in asm/arch_timer.h arm64: fix missing asm/pgtable-hwdef.h include in asm/processor.h arm64: sanity checks: add missing AArch32 registers arm64: Remove unused prepare_to_copy() arm64: Correct __NR_compat_syscalls for bpf | 10 January 2015, 04:57:58 UTC |
aa92913 | Linus Torvalds | 10 January 2015, 04:51:10 UTC | Merge tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kgdb/kdb fixes from Jason Wessel: "These have been around since 3.17 and in kgdb-next for the last 9 weeks and some will go back to -stable. Summary of changes: Cleanups - kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE Fixes - kgdb/kdb: Allow access on a single core, if a CPU round up is deemed impossible, which will allow inspection of the now "trashed" kernel - kdb: Add enable mask for the command groups - kdb: access controls to restrict sensitive commands" * tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kernel/debug/debug_core.c: Logging clean-up kgdb: timeout if secondary CPUs ignore the roundup kdb: Allow access to sensitive commands to be restricted by default kdb: Add enable mask for groups of commands kdb: Categorize kdb commands (similar to SysRq categorization) kdb: Remove KDB_REPEAT_NONE flag kdb: Use KDB_REPEAT_* values as flags kdb: Rename kdb_register_repeat() to kdb_register_flags() kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags kdb: Remove currently unused kdbtab_t->cmd_flags | 10 January 2015, 04:51:10 UTC |
dc9319f | Linus Torvalds | 10 January 2015, 02:10:48 UTC | Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linux Pull two nfsd bugfixes from Bruce Fields. * 'for-3.19' of git://linux-nfs.org/~bfields/linux: rpc: fix xdr_truncate_encode to handle buffer ending on page boundary nfsd: fix fi_delegees leak when fi_had_conflict returns true | 10 January 2015, 02:10:48 UTC |
20ebb34 | Linus Torvalds | 10 January 2015, 01:55:00 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two Ceph fixes from Sage Weil: "These are both pretty trivial: a sparse warning fix and size_t printk thing" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: fix sparse endianness warnings ceph: use %zu for len in ceph_fill_inline_data() | 10 January 2015, 01:55:00 UTC |
03c751a | Linus Torvalds | 10 January 2015, 01:46:07 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "None of these are huge, but my commit does fix a regression from 3.18 that could cause lost files during log replay. This also adds Dave Sterba to the list of Btrfs maintainers. It doesn't mean we're doing things differently, but Dave has really been helping with the maintainer workload for years" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: don't delay inode ref updates during log replay Btrfs: correctly get tree level in tree_backref_for_extent Btrfs: call inode_dec_link_count() on mkdir error path Btrfs: abort transaction if we don't find the block group Btrfs, scrub: uninitialized variable in scrub_extent_for_parity() Btrfs: add more maintainers | 10 January 2015, 01:46:07 UTC |
b3d574a | Linus Torvalds | 09 January 2015, 23:10:59 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc fixes from Andrew Morton: "12 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed memcg: fix destination cgroup leak on task charges migration mm: memcontrol: switch soft limit default back to infinity mm/debug_pagealloc: remove obsolete Kconfig options vfs: renumber FMODE_NONOTIFY and add to uniqueness check arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h ocfs2: fix the wrong directory passed to ocfs2_lookup_ino_from_name() when link file MAINTAINERS: update rydberg's addresses mm: protect set_page_dirty() from ongoing truncation mm: prevent endless growth of anon_vma hierarchy exit: fix race between wait_consider_task() and wait_task_zombie() ocfs2: remove bogus check in dlm_process_recovery_data | 09 January 2015, 23:10:59 UTC |
1e34792 | Victor Kamensky | 09 January 2015, 17:55:45 UTC | ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error In v3.19-rc3 tree when CONFIG_ARM_LPAE and CONFIG_DEBUG_RODATA are enabled image failed to compile with the following error: arch/arm/mm/init.c:661:14: error: ‘PMD_SECT_RDONLY’ undeclared here (not in a function) It seems that '80d6b0c ARM: mm: allow text and rodata sections to be read-only' and 'ded9477 ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE' commits crossed. 80d6b0c uses PMD_SECT_RDONLY macro but ded9477 renames it and uses software bits L_PMD_SECT_RDONLY instead. Fix is to use L_PMD_SECT_RDONLY instead PMD_SECT_RDONLY as ded9477 does in another places. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 09 January 2015, 20:44:12 UTC |
606185b | Dan Carpenter | 09 January 2015, 12:32:31 UTC | HID: roccat: potential out of bounds in pyra_sysfs_write_settings() This is a static checker fix. We write some binary settings to the sysfs file. One of the settings is the "->startup_profile". There isn't any checking to make sure it fits into the pyra->profile_settings[] array in the profile_activated() function. I added a check to pyra_sysfs_write_settings() in both places because I wasn't positive that the other callers were correct. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 09 January 2015, 13:41:01 UTC |
a63b03e | Chris Wilson | 06 January 2015, 10:29:35 UTC | mutex: Always clear owner field upon mutex_unlock() Currently if DEBUG_MUTEXES is enabled, the mutex->owner field is only cleared iff debug_locks is active. This exposes a race to other users of the field where the mutex->owner may be still set to a stale value, potentially upsetting mutex_spin_on_owner() among others. References: https://bugs.freedesktop.org/show_bug.cgi?id=87955 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1420540175-30204-1-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:20:39 UTC |
7f1a169 | Tetsuo Handa | 25 December 2014, 06:51:21 UTC | sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group() When alloc_fair_sched_group() in sched_create_group() fails, free_sched_group() is called, and free_fair_sched_group() is called by free_sched_group(). Since destroy_cfs_bandwidth() is called by free_fair_sched_group() without calling init_cfs_bandwidth(), RCU stall occurs at hrtimer_cancel(): INFO: rcu_sched self-detected stall on CPU { 1} (t=60000 jiffies g=13074 c=13073 q=0) Task dump for CPU 1: (fprintd) R running task 0 6249 1 0x00000088 ... Call Trace: <IRQ> [<ffffffff81094988>] sched_show_task+0xa8/0x110 [<ffffffff81097acd>] dump_cpu_task+0x3d/0x50 [<ffffffff810c3a80>] rcu_dump_cpu_stacks+0x90/0xd0 [<ffffffff810c7751>] rcu_check_callbacks+0x491/0x700 [<ffffffff810cbf2b>] update_process_times+0x4b/0x80 [<ffffffff810db046>] tick_sched_handle.isra.20+0x36/0x50 [<ffffffff810db0a2>] tick_sched_timer+0x42/0x70 [<ffffffff810ccb19>] __run_hrtimer+0x69/0x1a0 [<ffffffff810db060>] ? tick_sched_handle.isra.20+0x50/0x50 [<ffffffff810ccedf>] hrtimer_interrupt+0xef/0x230 [<ffffffff810452cb>] local_apic_timer_interrupt+0x3b/0x70 [<ffffffff8164a465>] smp_apic_timer_interrupt+0x45/0x60 [<ffffffff816485bd>] apic_timer_interrupt+0x6d/0x80 <EOI> [<ffffffff810cc588>] ? lock_hrtimer_base.isra.23+0x18/0x50 [<ffffffff81193cf1>] ? __kmalloc+0x211/0x230 [<ffffffff810cc9d2>] hrtimer_try_to_cancel+0x22/0xd0 [<ffffffff81193cf1>] ? __kmalloc+0x211/0x230 [<ffffffff810ccaa2>] hrtimer_cancel+0x22/0x30 [<ffffffff810a3cb5>] free_fair_sched_group+0x25/0xd0 [<ffffffff8108df46>] free_sched_group+0x16/0x40 [<ffffffff810971bb>] sched_create_group+0x4b/0x80 [<ffffffff810aa383>] sched_autogroup_create_attach+0x43/0x1c0 [<ffffffff8107dc9c>] sys_setsid+0x7c/0x110 [<ffffffff81647729>] system_call_fastpath+0x12/0x17 Check whether init_cfs_bandwidth() was called before calling destroy_cfs_bandwidth(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [ Move the check into destroy_cfs_bandwidth() to aid compilability. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/201412252210.GCC30204.SOMVFFOtQJFLOH@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:19:00 UTC |
269ad80 | Luca Abeni | 17 December 2014, 10:50:32 UTC | sched/deadline: Avoid double-accounting in case of missed deadlines The dl_runtime_exceeded() function is supposed to ckeck if a SCHED_DEADLINE task must be throttled, by checking if its current runtime is <= 0. However, it also checks if the scheduling deadline has been missed (the current time is larger than the current scheduling deadline), further decreasing the runtime if this happens. This "double accounting" is wrong: - In case of partitioned scheduling (or single CPU), this happens if task_tick_dl() has been called later than expected (due to small HZ values). In this case, the current runtime is also negative, and replenish_dl_entity() can take care of the deadline miss by recharging the current runtime to a value smaller than dl_runtime - In case of global scheduling on multiple CPUs, scheduling deadlines can be missed even if the task did not consume more runtime than expected, hence penalizing the task is wrong This patch fix this problem by throttling a SCHED_DEADLINE task only when its runtime becomes negative, and not modifying the runtime Signed-off-by: Luca Abeni <luca.abeni@unitn.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@gmail.com> Cc: <stable@vger.kernel.org> Cc: Dario Faggioli <raistlin@linux.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1418813432-20797-3-git-send-email-luca.abeni@unitn.it Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:57 UTC |
6a503c3 | Luca Abeni | 17 December 2014, 10:50:31 UTC | sched/deadline: Fix migration of SCHED_DEADLINE tasks According to global EDF, tasks should be migrated between runqueues without checking if their scheduling deadlines and runtimes are valid. However, SCHED_DEADLINE currently performs such a check: a migration happens doing: deactivate_task(rq, next_task, 0); set_task_cpu(next_task, later_rq->cpu); activate_task(later_rq, next_task, 0); which ends up calling dequeue_task_dl(), setting the new CPU, and then calling enqueue_task_dl(). enqueue_task_dl() then calls enqueue_dl_entity(), which calls update_dl_entity(), which can modify scheduling deadline and runtime, breaking global EDF scheduling. As a result, some of the properties of global EDF are not respected: for example, a taskset {(30, 80), (40, 80), (120, 170)} scheduled on two cores can have unbounded response times for the third task even if 30/80+40/80+120/170 = 1.5809 < 2 This can be fixed by invoking update_dl_entity() only in case of wakeup, or if this is a new SCHED_DEADLINE task. Signed-off-by: Luca Abeni <luca.abeni@unitn.it> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Juri Lelli <juri.lelli@gmail.com> Cc: <stable@vger.kernel.org> Cc: Dario Faggioli <raistlin@linux.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1418813432-20797-2-git-send-email-luca.abeni@unitn.it Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:56 UTC |
32a8df4 | Yuyang Du | 19 December 2014, 00:29:56 UTC | sched: Fix odd values in effective_load() calculations In effective_load, we have (long w * unsigned long tg->shares) / long W, when w is negative, it is cast to unsigned long and hence the product is insanely large. Fix this by casting tg->shares to long. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dave Jones <davej@redhat.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141219002956.GA25405@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:54 UTC |
536ebe9 | Peter Zijlstra | 16 December 2014, 15:28:38 UTC | sched, fanotify: Deal with nested sleeps As per e23738a7300a ("sched, inotify: Deal with nested sleeps"). fanotify_read is a wait loop with sleeps in. Wait loops rely on task_struct::state and sleeps do too, since that's the only means of actually sleeping. Therefore the nested sleeps destroy the wait loop state and the wait loop breaks the sleep functions that assume TASK_RUNNING (mutex_lock). Fix this by using the new woken_wake_function and wait_woken() stuff, which registers wakeups in wait and thereby allows shrinking the task_state::state changes to the actual sleep part. Reported-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Eric Paris <eparis@redhat.com> Link: http://lkml.kernel.org/r/20141216152838.GZ3337@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:18:12 UTC |
5306c31 | Andi Kleen | 06 January 2015, 22:34:35 UTC | perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes There was another report of a boot failure with a #GP fault in the uncore SBOX initialization. The earlier work around was not enough for this system. The boot was failing while trying to initialize the third SBOX. This patch detects parts with only two SBOXes and limits the number of SBOX units to two there. Stable material, as it affects boot problems on 3.18. Tested-by: Andreas Oehler <andreas@oehler-net.de> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1420583675-9163-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:30 UTC |
86c269f | Andy Lutomirski | 04 January 2015, 18:36:20 UTC | perf/x86_64: Improve user regs sampling Perf reports user regs for kernel-mode samples so that samples can be backtraced through user code. The old code was very broken in syscall context, resulting in useless backtraces. The new code, in contrast, is still dangerously racy, but it should at least work most of the time. Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: chenggang.qcg@taobao.com Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/243560c26ff0f739978e2459e203f6515367634d.1420396372.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:29 UTC |
88a7c26 | Andy Lutomirski | 04 January 2015, 18:36:19 UTC | perf: Move task_pt_regs sampling into arch code On x86_64, at least, task_pt_regs may be only partially initialized in many contexts, so x86_64 should not use it without extra care from interrupt context, let alone NMI context. This will allow x86_64 to override the logic and will supply some scratch space to use to make a cleaner copy of user regs. Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: chenggang.qcg@taobao.com Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/e431cd4c18c2e1c44c774f10758527fb2d1025c4.1420396372.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:28 UTC |
0f363b2 | Peter Zijlstra | 16 December 2014, 10:46:14 UTC | x86: Fix off-by-one in instruction decoder Stephane reported that the PEBS fixup was broken by the recent commit to the instruction decoder. The thing had an off-by-one which resulted in not being able to decode the last instruction and always bail. Reported-by: Stephane Eranian <eranian@google.com> Fixes: 6ba48ff46f76 ("x86: Remove arbitrary instruction size limit in instruction decoder") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org # 3.18 Cc: <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Liang Kan <kan.liang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20141216104614.GV3337@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:12:26 UTC |
300176a | Ingo Molnar | 09 January 2015, 10:04:13 UTC | Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Free callchains when hist entries are deleted, plugging a massive leak in 'top -g', where hist_entries (and its callchains) are decayed over time. (Namhyung Kim) - Fix segfault when showing callchain in the hists browser (report & top) (Namhyung Kim) - Fix children sort key behavior, and also the 'perf test 32' test that was failing due to reliance on undefined behaviour (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 09 January 2015, 10:04:13 UTC |
9e5e366 | Vlastimil Babka | 08 January 2015, 22:32:40 UTC | mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed Charles Shirron and Paul Cassella from Cray Inc have reported kswapd stuck in a busy loop with nothing left to balance, but kswapd_try_to_sleep() failing to sleep. Their analysis found the cause to be a combination of several factors: 1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait 2. The process has been killed (by OOM in this case), but has not yet been scheduled to remove itself from the waitqueue and die. 3. kswapd checks for throttled processes in prepare_kswapd_sleep(): if (waitqueue_active(&pgdat->pfmemalloc_wait)) { wake_up(&pgdat->pfmemalloc_wait); return false; // kswapd will not go to sleep } However, for a process that was already killed, wake_up() does not remove the process from the waitqueue, since try_to_wake_up() checks its state first and returns false when the process is no longer waiting. 4. kswapd is running on the same CPU as the only CPU that the process is allowed to run on (through cpus_allowed, or possibly single-cpu system). 5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd encounters no voluntary preemption points and repeatedly fails prepare_kswapd_sleep(), blocking the process from running and removing itself from the waitqueue, which would let kswapd sleep. So, the source of the problem is that we prevent kswapd from going to sleep until there are processes waiting on the pfmemalloc_wait queue, and a process waiting on a queue is guaranteed to be removed from the queue only when it gets scheduled. This was done to make sure that no process is left sleeping on pfmemalloc_wait when kswapd itself goes to sleep. However, it isn't necessary to postpone kswapd sleep until the pfmemalloc_wait queue actually empties. To prevent processes from being left sleeping, it's actually enough to guarantee that all processes waiting on pfmemalloc_wait queue have been woken up by the time we put kswapd to sleep. This patch therefore fixes this issue by substituting 'wake_up' with 'wake_up_all' and removing 'return false' in the code snippet from prepare_kswapd_sleep() above. Note that if any process puts itself in the queue after this waitqueue_active() check, or after the wake up itself, it means that the process will also wake up kswapd - and since we are under prepare_to_wait(), the wake up won't be missed. Also we update the comment prepare_kswapd_sleep() to hopefully more clearly describe the races it is preventing. Fixes: 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
4bdfc1c | Vladimir Davydov | 08 January 2015, 22:32:37 UTC | memcg: fix destination cgroup leak on task charges migration We are supposed to take one css reference per each memory page and per each swap entry accounted to a memory cgroup. However, during task charges migration we take a reference to the destination cgroup twice per each swap entry: first in mem_cgroup_do_precharge()->try_charge() and then in mem_cgroup_move_swap_account(), permanently leaking the destination cgroup. The hunk taking the second reference seems to be a leftover from the pre-00501b531c472 ("mm: memcontrol: rewrite charge API") era. Remove it to fix the leak. Fixes: e8ea14cc6ead (mm: memcontrol: take a css reference for each charged page) Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
24d404d | Johannes Weiner | 08 January 2015, 22:32:35 UTC | mm: memcontrol: switch soft limit default back to infinity Commit 3e32cb2e0a12 ("mm: memcontrol: lockless page counters") accidentally switched the soft limit default from infinity to zero, which turns all memcgs with even a single page into soft limit excessors and engages soft limit reclaim on all of them during global memory pressure. This makes global reclaim generally more aggressive, but also inverts the meaning of existing soft limit configurations where unset soft limits are usually more generous than set ones. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
70ecb3c | Joonsoo Kim | 08 January 2015, 22:32:32 UTC | mm/debug_pagealloc: remove obsolete Kconfig options These are obsolete since commit e30825f1869a ("mm/debug-pagealloc: prepare boottime configurable") was merged. So remove them. [pebolle@tiscali.nl: find obsolete Kconfig options] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
75069f2 | David Drysdale | 08 January 2015, 22:32:29 UTC | vfs: renumber FMODE_NONOTIFY and add to uniqueness check Fix clashing values for O_PATH and FMODE_NONOTIFY on sparc. The clashing O_PATH value was added in commit 5229645bdc35 ("vfs: add nonconflicting values for O_PATH") but this can't be changed as it is user-visible. FMODE_NONOTIFY is only used internally in the kernel, but it is in the same numbering space as the other O_* flags, as indicated by the comment at the top of include/uapi/asm-generic/fcntl.h (and its use in fs/notify/fanotify/fanotify_user.c). So renumber it to avoid the clash. All of this has happened before (commit 12ed2e36c98a: "fanotify: FMODE_NONOTIFY and __O_SYNC in sparc conflict"), and all of this will happen again -- so update the uniqueness check in fcntl_init() to include __FMODE_NONOTIFY. Signed-off-by: David Drysdale <drysdale@google.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jan Kara <jack@suse.cz> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Eric Paris <eparis@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |
9de93e7 | Oleg Nesterov | 08 January 2015, 22:32:26 UTC | arch/blackfin/mach-bf533/boards/stamp.c: add linux/delay.h build error arch/blackfin/mach-bf533/boards/stamp.c:834:2: error: implicit declaration of function 'mdelay' Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 January 2015, 23:10:52 UTC |