https://github.com/torvalds/linux
Revision b5b1404d0815894de0690de8a1ab58269e56eae6 authored by Linus Torvalds on 12 August 2018, 19:19:42 UTC, committed by Linus Torvalds on 12 August 2018, 19:19:42 UTC
This is purely a preparatory patch for upcoming changes during the 4.19
merge window.

We have a function called "boot_cpu_state_init()" that isn't really
about the bootup cpu state: that is done much earlier by the similarly
named "boot_cpu_init()" (note lack of "state" in name).

This function initializes some hotplug CPU state, and needs to run after
the percpu data has been properly initialized.  It even has a comment to
that effect.

Except it _doesn't_ actually run after the percpu data has been properly
initialized.  On x86 it happens to do that, but on at least arm and
arm64, the percpu base pointers are initialized by the arch-specific
'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init().

This had some unexpected results, and in particular we have a patch
pending for the merge window that did the obvious cleanup of using
'this_cpu_write()' in the cpu hotplug init code:

  -       per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;
  +       this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);

which is obviously the right thing to do.  Except because of the
ordering issue, it actually failed miserably and unexpectedly on arm64.

So this just fixes the ordering, and changes the name of the function to
be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu
hotplug state, because the core CPU state was supposed to have already
been done earlier.

Marked for stable, since the (not yet merged) patch that will show this
problem is marked for stable.

Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent d6dd643
Raw File
Tip revision: b5b1404d0815894de0690de8a1ab58269e56eae6 authored by Linus Torvalds on 12 August 2018, 19:19:42 UTC
init: rename and re-order boot_cpu_state_init()
Tip revision: b5b1404
get_dvb_firmware
#!/usr/bin/env perl
#     DVB firmware extractor
#
#     (c) 2004 Andrew de Quincey
#
#     This program is free software; you can redistribute it and/or modify
#       it under the terms of the GNU General Public License as published by
#       the Free Software Foundation; either version 2 of the License, or
#       (at your option) any later version.
#
#     This program is distributed in the hope that it will be useful,
#       but WITHOUT ANY WARRANTY; without even the implied warranty of
#       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#
#     GNU General Public License for more details.
#
#     You should have received a copy of the GNU General Public License
#       along with this program; if not, write to the Free Software
#       Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

use File::Temp qw/ tempdir /;
use IO::Handle;

@components = ( "sp8870", "sp887x", "tda10045", "tda10046",
		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
		"dec3000s", "vp7041", "vp7049", "dibusb", "nxt2002", "nxt2004",
		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
		"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
		"lme2510c_s7395_old", "drxk", "drxk_terratec_h5",
		"drxk_hauppauge_hvr930c", "tda10071", "it9135", "drxk_pctv",
		"drxk_terratec_htc_stick", "sms1xxx_hcw", "si2165");

# Check args
syntax() if (scalar(@ARGV) != 1);
$cid = $ARGV[0];

# Do it!
for ($i=0; $i < scalar(@components); $i++) {
    if ($cid eq $components[$i]) {
	$outfile = eval($cid);
	die $@ if $@;
	print STDERR <<EOF;
Firmware(s) $outfile extracted successfully.
Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
(depending on configuration of firmware hotplug).
EOF
	exit(0);
    }
}

# If we get here, it wasn't found
print STDERR "Unknown component \"$cid\"\n";
syntax();




# ---------------------------------------------------------------
# Firmware-specific extraction subroutines

sub sp8870 {
    my $sourcefile = "tt_Premium_217g.zip";
    my $url = "http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/$sourcefile";
    my $hash = "53970ec17a538945a6d8cb608a7b3899";
    my $outfile = "dvb-fe-sp8870.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    verify("$tmpdir/software/OEM/HE/App/boot/SC_MAIN.MC", $hash);
    copy("$tmpdir/software/OEM/HE/App/boot/SC_MAIN.MC", $outfile);

    $outfile;
}

sub sp887x {
    my $sourcefile = "Dvbt1.3.57.6.zip";
    my $url = "http://www.avermedia.com/software/$sourcefile";
    my $cabfile = "DVBT Net  Ver1.3.57.6/disk1/data1.cab";
    my $hash = "237938d53a7f834c05c42b894ca68ac3";
    my $outfile = "dvb-fe-sp887x.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();
    checkunshield();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    unshield("$tmpdir/$cabfile", $tmpdir);
    verify("$tmpdir/ZEnglish/sc_main.mc", $hash);
    copy("$tmpdir/ZEnglish/sc_main.mc", $outfile);

    $outfile;
}

sub tda10045 {
    my $sourcefile = "tt_budget_217g.zip";
    my $url = "http://www.technotrend.de/new/217g/$sourcefile";
    my $hash = "2105fd5bf37842fbcdfa4bfd58f3594a";
    my $outfile = "dvb-fe-tda10045.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x37ef9, 30555, "$tmpdir/fwtmp");
    verify("$tmpdir/fwtmp", $hash);
    copy("$tmpdir/fwtmp", $outfile);

    $outfile;
}

sub tda10046 {
	my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
	my $url = "http://technotrend.com.ua/download/software/219/$sourcefile";
	my $hash = "6a7e1e2f2644b162ff0502367553c72d";
	my $outfile = "dvb-fe-tda10046.fw";
	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

	checkstandard();

	wgetfile($sourcefile, $url);
	unzip($sourcefile, $tmpdir);
	extract("$tmpdir/TT_PCI_2.19h_28_11_2006/software/OEM/PCI/App/ttlcdacc.dll", 0x65389, 24478, "$tmpdir/fwtmp");
	verify("$tmpdir/fwtmp", $hash);
	copy("$tmpdir/fwtmp", $outfile);

	$outfile;
}

sub tda10046lifeview {
    my $sourcefile = "7%5Cdrv_2.11.02.zip";
    my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
    my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
    my $outfile = "dvb-fe-tda10046.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp");
    verify("$tmpdir/fwtmp", $hash);
    copy("$tmpdir/fwtmp", $outfile);

    $outfile;
}

sub av7110 {
    my $sourcefile = "dvb-ttpci-01.fw-261d";
    my $url = "https://linuxtv.org/downloads/firmware/$sourcefile";
    my $hash = "603431b6259715a8e88f376a53b64e2f";
    my $outfile = "dvb-ttpci-01.fw";

    checkstandard();

    wgetfile($sourcefile, $url);
    verify($sourcefile, $hash);
    copy($sourcefile, $outfile);

    $outfile;
}

sub dec2000t {
    my $sourcefile = "dec217g.exe";
    my $url = "http://hauppauge.lightpath.net/de/$sourcefile";
    my $hash = "bd86f458cee4a8f0a8ce2d20c66215a9";
    my $outfile = "dvb-ttusb-dec-2000t.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_T.bin", $hash);
    copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_T.bin", $outfile);

    $outfile;
}

sub dec2540t {
    my $sourcefile = "dec217g.exe";
    my $url = "http://hauppauge.lightpath.net/de/$sourcefile";
    my $hash = "53e58f4f5b5c2930beee74a7681fed92";
    my $outfile = "dvb-ttusb-dec-2540t.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_X.bin", $hash);
    copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_X.bin", $outfile);

    $outfile;
}

sub dec3000s {
    my $sourcefile = "dec217g.exe";
    my $url = "http://hauppauge.lightpath.net/de/$sourcefile";
    my $hash = "b013ececea83f4d6d8d2a29ac7c1b448";
    my $outfile = "dvb-ttusb-dec-3000s.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    verify("$tmpdir/software/OEM/STB/App/Boot/STB_PC_S.bin", $hash);
    copy("$tmpdir/software/OEM/STB/App/Boot/STB_PC_S.bin", $outfile);

    $outfile;
}
sub opera1{
	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);

	checkstandard();
	my $fwfile1="dvb-usb-opera1-fpga-01.fw";
	my $fwfile2="dvb-usb-opera-01.fw";
	extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw");
	extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1");
	extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2");
	delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1");
	delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1");
	verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70");
	verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1");
	verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d");

	my $RES1="\x01\x92\x7f\x00\x01\x00";
	my $RES0="\x01\x92\x7f\x00\x00\x00";
	my $DAT1="\x01\x00\xe6\x00\x01\x00";
	my $DAT0="\x01\x00\xe6\x00\x00\x00";
	open FW,">$tmpdir/opera.fw";
	print FW "$RES1";
	print FW "$DAT1";
	print FW "$RES1";
	print FW "$DAT1";
	appendfile(FW,"$tmpdir/fw1part1-1");
	print FW "$RES0";
	print FW "$DAT0";
	print FW "$RES1";
	print FW "$DAT1";
	appendfile(FW,"$tmpdir/fw1part2-1");
	print FW "$RES1";
	print FW "$DAT1";
	print FW "$RES0";
	print FW "$DAT0";
	copy ("$tmpdir/opera1-fpga.fw",$fwfile1);
	copy ("$tmpdir/opera.fw",$fwfile2);

	$fwfile1.",".$fwfile2;
}

sub vp7041 {
    my $sourcefile = "2.422.zip";
    my $url = "http://www.twinhan.com/files/driver/USB-Ter/$sourcefile";
    my $hash = "e88c9372d1f66609a3e7b072c53fbcfe";
    my $outfile = "dvb-vp7041-2.422.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    extract("$tmpdir/VisionDTV/Drivers/Win2K&XP/UDTTload.sys", 12503, 3036, "$tmpdir/fwtmp1");
    extract("$tmpdir/VisionDTV/Drivers/Win2K&XP/UDTTload.sys", 2207, 10274, "$tmpdir/fwtmp2");

    my $CMD = "\000\001\000\222\177\000";
    my $PAD = "\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000";
    my ($FW);
    open $FW, ">$tmpdir/fwtmp3";
    print $FW "$CMD\001$PAD";
    print $FW "$CMD\001$PAD";
    appendfile($FW, "$tmpdir/fwtmp1");
    print $FW "$CMD\000$PAD";
    print $FW "$CMD\001$PAD";
    appendfile($FW, "$tmpdir/fwtmp2");
    print $FW "$CMD\001$PAD";
    print $FW "$CMD\000$PAD";
    close($FW);

    verify("$tmpdir/fwtmp3", $hash);
    copy("$tmpdir/fwtmp3", $outfile);

    $outfile;
}

sub vp7049 {
    my $fwfile = "dvb-usb-vp7049-0.95.fw";
    my $url = "http://ao2.it/sites/default/files/blog/2012/11/06/linux-support-digicom-digitune-s-vp7049-udtt7049/$fwfile";
    my $hash = "5609fd295168aea88b25ff43a6f79c36";

    checkstandard();

    wgetfile($fwfile, $url);
    verify($fwfile, $hash);

    $fwfile;
}

sub dibusb {
	my $url = "https://linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
	my $outfile = "dvb-dibusb-5.0.0.11.fw";
	my $hash = "fa490295a527360ca16dcdf3224ca243";

	checkstandard();

	wgetfile($outfile, $url);
	verify($outfile,$hash);

	$outfile;
}

sub nxt2002 {
    my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
    my $url = "http://www.bbti.us/download/windows/$sourcefile";
    my $hash = "476befae8c7c1bb9648954060b1eec1f";
    my $outfile = "dvb-fe-nxt2002.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    verify("$tmpdir/SkyNET.sys", $hash);
    extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);

    $outfile;
}

sub nxt2004 {
    my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip";
    my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile";
    my $hash = "111cb885b1e009188346d72acfed024c";
    my $outfile = "dvb-fe-nxt2004.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url);
    unzip($sourcefile, $tmpdir);
    verify("$tmpdir/3xHybrid.sys", $hash);
    extract("$tmpdir/3xHybrid.sys", 465304, 9584, $outfile);

    $outfile;
}

sub or51211 {
    my $fwfile = "dvb-fe-or51211.fw";
    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
    my $hash = "d830949c771a289505bf9eafc225d491";

    checkstandard();

    wgetfile($fwfile, $url);
    verify($fwfile, $hash);

    $fwfile;
}

sub cx231xx {
    my $fwfile = "v4l-cx231xx-avcore-01.fw";
    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
    my $hash = "7d3bb956dc9df0eafded2b56ba57cc42";

    checkstandard();

    wgetfile($fwfile, $url);
    verify($fwfile, $hash);

    $fwfile;
}

sub cx18 {
    my $url = "https://linuxtv.org/downloads/firmware/";

    my %files = (
	'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a',
	'v4l-cx23418-cpu.fw' => 'b6c7ed64bc44b1a6e0840adaeac39d79',
	'v4l-cx23418-dig.fw' => '95bc688d3e7599fd5800161e9971cc55',
    );

    checkstandard();

    my $allfiles;
    foreach my $fwfile (keys %files) {
	wgetfile($fwfile, "$url/$fwfile");
	verify($fwfile, $files{$fwfile});
	$allfiles .= " $fwfile";
    }

    $allfiles =~ s/^\s//;

    $allfiles;
}

sub mpc718 {
    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();
    wgetfile($archive, $url);
    unzip($archive, $tmpdir);

    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
    my $found = 0;

    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
    binmode IN;
    open OUT, '>', $fwfile;
    binmode OUT;
    {
	# Block scope because we change the line terminator variable $/
	my $prevlen = 0;
	my $currlen;

	# Buried in the data segment are 3 runs of almost identical
	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
	# command for the MT352.
	# Pull out the middle run (because it's easy) of register-value
	# pairs to make the "firmware" file.

	local $/ = "\x5d\x01"; # MT352 "TUNER GO"

	while (<IN>) {
	    $currlen = length($_);
	    if ($prevlen == $currlen && $currlen <= 64) {
		chop; chop; # Get rid of "TUNER GO"
		s/^\0\0//;  # get rid of leading 00 00 if it's there
		printf OUT "$_";
		$found = 1;
		last;
	    }
	    $prevlen = $currlen;
	}
    }
    close OUT;
    close IN;
    if (!$found) {
	unlink $fwfile;
	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
    }
    $fwfile;
}

sub cx23885 {
    my $url = "https://linuxtv.org/downloads/firmware/";

    my %files = (
	'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
	'v4l-cx23885-enc.fw'       => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
    );

    checkstandard();

    my $allfiles;
    foreach my $fwfile (keys %files) {
	wgetfile($fwfile, "$url/$fwfile");
	verify($fwfile, $files{$fwfile});
	$allfiles .= " $fwfile";
    }

    $allfiles =~ s/^\s//;

    $allfiles;
}

sub pvrusb2 {
    my $url = "https://linuxtv.org/downloads/firmware/";

    my %files = (
	'v4l-cx25840.fw'           => 'dadb79e9904fc8af96e8111d9cb59320',
    );

    checkstandard();

    my $allfiles;
    foreach my $fwfile (keys %files) {
	wgetfile($fwfile, "$url/$fwfile");
	verify($fwfile, $files{$fwfile});
	$allfiles .= " $fwfile";
    }

    $allfiles =~ s/^\s//;

    $allfiles;
}

sub or51132_qam {
    my $fwfile = "dvb-fe-or51132-qam.fw";
    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
    my $hash = "7702e8938612de46ccadfe9b413cb3b5";

    checkstandard();

    wgetfile($fwfile, $url);
    verify($fwfile, $hash);

    $fwfile;
}

sub or51132_vsb {
    my $fwfile = "dvb-fe-or51132-vsb.fw";
    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
    my $hash = "c16208e02f36fc439a557ad4c613364a";

    checkstandard();

    wgetfile($fwfile, $url);
    verify($fwfile, $hash);

    $fwfile;
}

sub bluebird {
	my $url = "https://linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
	my $outfile = "dvb-usb-bluebird-01.fw";
	my $hash = "658397cb9eba9101af9031302671f49d";

	checkstandard();

	wgetfile($outfile, $url);
	verify($outfile,$hash);

	$outfile;
}

sub af9015 {
	my $sourcefile = "download.ashx?file=57";
	my $url = "http://www.ite.com.tw/EN/Services/$sourcefile";
	my $hash = "e3f08935158038d385ad382442f4bb2d";
	my $outfile = "dvb-usb-af9015.fw";
	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
	my $fwoffset = 0x25690;
	my $fwlength = 18725;
	my ($chunklength, $buf, $rcount);

	checkstandard();

	wgetfile($sourcefile, $url);
	unzip($sourcefile, $tmpdir);
	verify("$tmpdir/Driver/Files/AF15BDA.sys", $hash);

	open INFILE, '<', "$tmpdir/Driver/Files/AF15BDA.sys";
	open OUTFILE, '>', $outfile;

	sysseek(INFILE, $fwoffset, SEEK_SET);
	while($fwlength > 0) {
		$chunklength = 55;
		$chunklength = $fwlength if ($chunklength > $fwlength);
		$rcount = sysread(INFILE, $buf, $chunklength);
		die "Ran out of data\n" if ($rcount != $chunklength);
		syswrite(OUTFILE, $buf);
		sysread(INFILE, $buf, 8);
		$fwlength -= $rcount + 8;
	}

	close OUTFILE;
	close INFILE;
}

sub ngene {
    my $url = "http://www.digitaldevices.de/download/";
    my $file1 = "ngene_15.fw";
    my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
    my $file2 = "ngene_17.fw";
    my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
    my $url2 = "http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/";
    my $file3 = "ngene_18.fw";
    my $hash3 = "ebce3ea769a53e3e0b0197c3b3f127e3";

    checkstandard();

    wgetfile($file1, $url . $file1);
    verify($file1, $hash1);

    wgetfile($file2, $url . $file2);
    verify($file2, $hash2);

    wgetfile($file3, $url2 . $file3);
    verify($file3, $hash3);

    "$file1, $file2, $file3";
}

sub az6027{
    my $firmware = "dvb-usb-az6027-03.fw";
    my $url = "http://linux.terratec.de/files/TERRATEC_S7/$firmware";

    wgetfile($firmware, $url);

    $firmware;
}

sub lme2510_lg {
    my $sourcefile = "LMEBDA_DVBS.sys";
    my $hash = "fc6017ad01e79890a97ec53bea157ed2";
    my $outfile = "dvb-usb-lme2510-lg.fw";
    my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad";

    checkstandard();

    verify($sourcefile, $hash);
    extract($sourcefile, 4168, 3841, $outfile);
    verify($outfile, $hasho);
    $outfile;
}

sub lme2510c_s7395 {
    my $sourcefile = "US2A0D.sys";
    my $hash = "b0155a8083fb822a3bd47bc360e74601";
    my $outfile = "dvb-usb-lme2510c-s7395.fw";
    my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf";

    checkstandard();

    verify($sourcefile, $hash);
    extract($sourcefile, 37248, 3720, $outfile);
    verify($outfile, $hasho);
    $outfile;
}

sub lme2510c_s7395_old {
    my $sourcefile = "LMEBDA_DVBS7395C.sys";
    my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31";
    my $outfile = "dvb-usb-lme2510c-s7395.fw";
    my $hasho = "90430c5b435eb5c6f88fd44a9d950674";

    checkstandard();

    verify($sourcefile, $hash);
    extract($sourcefile, 4208, 3881, $outfile);
    verify($outfile, $hasho);
    $outfile;
}

sub drxk {
    my $url = "http://l4m-daten.de/files/";
    my $zipfile = "DDTuner.zip";
    my $hash = "f5a37b9a20a3534997997c0b1382a3e5";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
    my $drvfile = "DDTuner.sys";
    my $fwfile = "drxk_a3.mc";

    checkstandard();

    wgetfile($zipfile, $url . $zipfile);
    verify($zipfile, $hash);
    unzip($zipfile, $tmpdir);
    extract("$tmpdir/$drvfile", 0x14dd8, 15634, "$fwfile");

    "$fwfile"
}

sub drxk_hauppauge_hvr930c {
    my $url = "http://www.wintvcd.co.uk/drivers/";
    my $zipfile = "HVR-9x0_5_10_325_28153_SIGNED.zip";
    my $hash = "83ab82e7e9480ec8bf1ae0155ca63c88";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
    my $drvfile = "HVR-900/emOEM.sys";
    my $fwfile = "dvb-usb-hauppauge-hvr930c-drxk.fw";

    checkstandard();

    wgetfile($zipfile, $url . $zipfile);
    verify($zipfile, $hash);
    unzip($zipfile, $tmpdir);
    extract("$tmpdir/$drvfile", 0x117b0, 42692, "$fwfile");

    "$fwfile"
}

sub drxk_terratec_h5 {
    my $url = "https://linuxtv.org/downloads/firmware/";
    my $hash = "19000dada8e2741162ccc50cc91fa7f1";
    my $fwfile = "dvb-usb-terratec-h5-drxk.fw";

    checkstandard();

    wgetfile($fwfile, $url . $fwfile);
    verify($fwfile, $hash);

    "$fwfile"
}

sub drxk_terratec_htc_stick {
    my $url = "http://ftp.terratec.de/Receiver/Cinergy_HTC_Stick/Updates/History/";
    my $zipfile = "Cinergy_HTC_Stick_Drv_5.09.1202.00_XP_Vista_7.exe";
    my $hash = "6722a2442a05423b781721fbc069ed5e";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
    my $drvfile = "Cinergy HTC Stick/BDA Driver 5.09.1202.00/Windows 32 Bit/emOEM.sys";
    my $fwfile = "dvb-usb-terratec-htc-stick-drxk.fw";

    checkstandard();

    wgetfile($zipfile, $url . $zipfile);
    verify($zipfile, $hash);
    unzip($zipfile, $tmpdir);
    extract("$tmpdir/$drvfile", 0x4e5c0, 42692, "$fwfile");

    "$fwfile"
}

sub it9135 {
	my $url = "http://www.ite.com.tw/uploads/firmware/v3.25.0.0/";
	my $file1 = "dvb-usb-it9135-01.zip";
	my $fwfile1 = "dvb-usb-it9135-01.fw";
	my $hash1 = "02fcf11174eda84745dae7e61c5ff9ba";
	my $file2 = "dvb-usb-it9135-02.zip";
	my $fwfile2 = "dvb-usb-it9135-02.fw";
	my $hash2 = "d5e1437dc24358578e07999475d4cac9";

	checkstandard();

	wgetfile($file1, $url . $file1);
	unzip($file1, "");
	verify("$fwfile1", $hash1);

	wgetfile($file2, $url . $file2);
	unzip($file2, "");
	verify("$fwfile2", $hash2);

	"$file1 $file2"
}

sub tda10071 {
    my $sourcefile = "PCTV_460e_reference.zip";
    my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/";
    my $hash = "4403de903bf2593464c8d74bbc200a57";
    my $fwfile = "dvb-fe-tda10071.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url . $sourcefile);
    verify($sourcefile, $hash);
    unzip($sourcefile, $tmpdir);
    extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x67d38, 40504, $fwfile);

    "$fwfile";
}

sub drxk_pctv {
    my $sourcefile = "PCTV_460e_reference.zip";
    my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/";
    my $hash = "4403de903bf2593464c8d74bbc200a57";
    my $fwfile = "dvb-demod-drxk-pctv.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url . $sourcefile);
    verify($sourcefile, $hash);
    unzip($sourcefile, $tmpdir);
    extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x72b80, 42692, $fwfile);

    "$fwfile";
}

sub sms1xxx_hcw {
    my $url = "http://steventoth.net/linux/sms1xxx/";
    my %files = (
	'sms1xxx-hcw-55xxx-dvbt-01.fw'  => "afb6f9fb9a71d64392e8564ef9577e5a",
	'sms1xxx-hcw-55xxx-dvbt-02.fw'  => "b44807098ba26e52cbedeadc052ba58f",
	'sms1xxx-hcw-55xxx-isdbt-02.fw' => "dae934eeea85225acbd63ce6cfe1c9e4",
    );

    checkstandard();

    my $allfiles;
    foreach my $fwfile (keys %files) {
	wgetfile($fwfile, "$url/$fwfile");
	verify($fwfile, $files{$fwfile});
	$allfiles .= " $fwfile";
    }

    $allfiles =~ s/^\s//;

    $allfiles;
}

sub si2165 {
    my $sourcefile = "model_111xxx_122xxx_driver_6_0_119_31191_WHQL.zip";
    my $url = "http://www.hauppauge.de/files/drivers/";
    my $hash = "76633e7c76b0edee47c3ba18ded99336";
    my $fwfile = "dvb-demod-si2165.fw";
    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);

    checkstandard();

    wgetfile($sourcefile, $url . $sourcefile);
    verify($sourcefile, $hash);
    unzip($sourcefile, $tmpdir);
    extract("$tmpdir/Driver10/Hcw10bda.sys", 0x80788, 0x81E08-0x80788, "$tmpdir/fw1");

    delzero("$tmpdir/fw1","$tmpdir/fw1-1");
    #verify("$tmpdir/fw1","5e0909858fdf0b5b09ad48b9fe622e70");

    my $CRC="\x0A\xCC";
    my $BLOCKS_MAIN="\x27";
    open FW,">$fwfile";
    print FW "\x01\x00"; # just a version id for the driver itself
    print FW "\x9A"; # fw version
    print FW "\x00"; # padding
    print FW "$BLOCKS_MAIN"; # number of blocks of main part
    print FW "\x00"; # padding
    print FW "$CRC"; # 16bit crc value of main part
    appendfile(FW,"$tmpdir/fw1");

    "$fwfile";
}

# ---------------------------------------------------------------
# Utilities

sub checkstandard {
    if (system("which unzip > /dev/null 2>&1")) {
	die "This firmware requires the unzip command - see ftp://ftp.info-zip.org/pub/infozip/UnZip.html\n";
    }
    if (system("which md5sum > /dev/null 2>&1")) {
	die "This firmware requires the md5sum command - see http://www.gnu.org/software/coreutils/\n";
    }
    if (system("which wget > /dev/null 2>&1")) {
	die "This firmware requires the wget command - see http://wget.sunsite.dk/\n";
    }
}

sub checkunshield {
    if (system("which unshield > /dev/null 2>&1")) {
	die "This firmware requires the unshield command - see http://sourceforge.net/projects/synce/\n";
    }
}

sub wgetfile {
    my ($sourcefile, $url) = @_;

    if (! -f $sourcefile) {
	system("wget -O \"$sourcefile\" \"$url\"") and die "wget failed - unable to download firmware";
    }
}

sub unzip {
    my ($sourcefile, $todir) = @_;

    $status = system("unzip -q -o -d \"$todir\" \"$sourcefile\" 2>/dev/null" );
    if ((($status >> 8) > 2) || (($status & 0xff) != 0)) {
	die ("unzip failed - unable to extract firmware");
    }
}

sub unshield {
    my ($sourcefile, $todir) = @_;

    system("unshield x -d \"$todir\" \"$sourcefile\" > /dev/null" ) and die ("unshield failed - unable to extract firmware");
}

sub verify {
    my ($filename, $hash) = @_;
    my ($testhash);

    open(CMD, "md5sum \"$filename\"|");
    $testhash = <CMD>;
    $testhash =~ /([a-zA-Z0-9]*)/;
    $testhash = $1;
    close CMD;
    die "Hash of extracted file does not match!\n" if ($testhash ne $hash);
}

sub copy {
    my ($from, $to) = @_;

    system("cp -f \"$from\" \"$to\"") and die ("cp failed");
}

sub extract {
    my ($infile, $offset, $length, $outfile) = @_;
    my ($chunklength, $buf, $rcount);

    open INFILE, "<$infile";
    open OUTFILE, ">$outfile";
    sysseek(INFILE, $offset, SEEK_SET);
    while($length > 0) {
	# Calc chunk size
	$chunklength = 2048;
	$chunklength = $length if ($chunklength > $length);

	$rcount = sysread(INFILE, $buf, $chunklength);
	die "Ran out of data\n" if ($rcount != $chunklength);
	syswrite(OUTFILE, $buf);
	$length -= $rcount;
    }
    close INFILE;
    close OUTFILE;
}

sub appendfile {
    my ($FH, $infile) = @_;
    my ($buf);

    open INFILE, "<$infile";
    while(1) {
	$rcount = sysread(INFILE, $buf, 2048);
	last if ($rcount == 0);
	print $FH $buf;
    }
    close(INFILE);
}

sub delzero{
	my ($infile,$outfile) =@_;

	open INFILE,"<$infile";
	open OUTFILE,">$outfile";
	while (1){
		$rcount=sysread(INFILE,$buf,22);
		$len=ord(substr($buf,0,1));
		print OUTFILE substr($buf,0,1);
		print OUTFILE substr($buf,2,$len+3);
	last if ($rcount<1);
	printf OUTFILE "%c",0;
#print $len." ".length($buf)."\n";

	}
	close(INFILE);
	close(OUTFILE);
}

sub syntax() {
    print STDERR "syntax: get_dvb_firmware <component>\n";
    print STDERR "Supported components:\n";
    @components = sort @components;
    for($i=0; $i < scalar(@components); $i++) {
	print STDERR "\t" . $components[$i] . "\n";
    }
    exit(1);
}
back to top