https://github.com/torvalds/linux
Revision b6f6881aaf2344bf35a4221810737abe5fd210af authored by Ido Schimmel on 28 January 2021, 14:48:20 UTC, committed by Jakub Kicinski on 28 January 2021, 21:09:01 UTC
The purpose of the delayed work in the SPAN module is to potentially
update the destination port and various encapsulation parameters of SPAN
agents that point to a VLAN device or a GRE tap. The destination port
can change following the insertion of a new route, for example.

SPAN agents that point to a physical port or the CPU port are static and
never change throughout the lifetime of the SPAN agent. Therefore, skip
over them in the delayed work.

This fixes an issue where the delayed work overwrites the policer
that was set on a SPAN agent pointing to the CPU. Modifying the delayed
work to inherit the original policer configuration is error-prone, as
the same will be needed for any new parameter.

Fixes: 4039504e6a0c ("mlxsw: spectrum_span: Allow setting policer on a SPAN agent")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent 11df27f
Raw File
Tip revision: b6f6881aaf2344bf35a4221810737abe5fd210af authored by Ido Schimmel on 28 January 2021, 14:48:20 UTC
mlxsw: spectrum_span: Do not overwrite policer configuration
Tip revision: b6f6881
file_table.c
// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/fs/file_table.c
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *  Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
 */

#include <linux/string.h>
#include <linux/slab.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/security.h>
#include <linux/cred.h>
#include <linux/eventpoll.h>
#include <linux/rcupdate.h>
#include <linux/mount.h>
#include <linux/capability.h>
#include <linux/cdev.h>
#include <linux/fsnotify.h>
#include <linux/sysctl.h>
#include <linux/percpu_counter.h>
#include <linux/percpu.h>
#include <linux/task_work.h>
#include <linux/ima.h>
#include <linux/swap.h>

#include <linux/atomic.h>

#include "internal.h"

/* sysctl tunables... */
struct files_stat_struct files_stat = {
	.max_files = NR_FILE
};

/* SLAB cache for file structures */
static struct kmem_cache *filp_cachep __read_mostly;

static struct percpu_counter nr_files __cacheline_aligned_in_smp;

static void file_free_rcu(struct rcu_head *head)
{
	struct file *f = container_of(head, struct file, f_u.fu_rcuhead);

	put_cred(f->f_cred);
	kmem_cache_free(filp_cachep, f);
}

static inline void file_free(struct file *f)
{
	security_file_free(f);
	if (!(f->f_mode & FMODE_NOACCOUNT))
		percpu_counter_dec(&nr_files);
	call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}

/*
 * Return the total number of open files in the system
 */
static long get_nr_files(void)
{
	return percpu_counter_read_positive(&nr_files);
}

/*
 * Return the maximum number of open files in the system
 */
unsigned long get_max_files(void)
{
	return files_stat.max_files;
}
EXPORT_SYMBOL_GPL(get_max_files);

/*
 * Handle nr_files sysctl
 */
#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
int proc_nr_files(struct ctl_table *table, int write,
                     void *buffer, size_t *lenp, loff_t *ppos)
{
	files_stat.nr_files = get_nr_files();
	return proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
}
#else
int proc_nr_files(struct ctl_table *table, int write,
                     void *buffer, size_t *lenp, loff_t *ppos)
{
	return -ENOSYS;
}
#endif

static struct file *__alloc_file(int flags, const struct cred *cred)
{
	struct file *f;
	int error;

	f = kmem_cache_zalloc(filp_cachep, GFP_KERNEL);
	if (unlikely(!f))
		return ERR_PTR(-ENOMEM);

	f->f_cred = get_cred(cred);
	error = security_file_alloc(f);
	if (unlikely(error)) {
		file_free_rcu(&f->f_u.fu_rcuhead);
		return ERR_PTR(error);
	}

	atomic_long_set(&f->f_count, 1);
	rwlock_init(&f->f_owner.lock);
	spin_lock_init(&f->f_lock);
	mutex_init(&f->f_pos_lock);
	f->f_flags = flags;
	f->f_mode = OPEN_FMODE(flags);
	/* f->f_version: 0 */

	return f;
}

/* Find an unused file structure and return a pointer to it.
 * Returns an error pointer if some error happend e.g. we over file
 * structures limit, run out of memory or operation is not permitted.
 *
 * Be very careful using this.  You are responsible for
 * getting write access to any mount that you might assign
 * to this filp, if it is opened for write.  If this is not
 * done, you will imbalance int the mount's writer count
 * and a warning at __fput() time.
 */
struct file *alloc_empty_file(int flags, const struct cred *cred)
{
	static long old_max;
	struct file *f;

	/*
	 * Privileged users can go above max_files
	 */
	if (get_nr_files() >= files_stat.max_files && !capable(CAP_SYS_ADMIN)) {
		/*
		 * percpu_counters are inaccurate.  Do an expensive check before
		 * we go and fail.
		 */
		if (percpu_counter_sum_positive(&nr_files) >= files_stat.max_files)
			goto over;
	}

	f = __alloc_file(flags, cred);
	if (!IS_ERR(f))
		percpu_counter_inc(&nr_files);

	return f;

over:
	/* Ran out of filps - report that */
	if (get_nr_files() > old_max) {
		pr_info("VFS: file-max limit %lu reached\n", get_max_files());
		old_max = get_nr_files();
	}
	return ERR_PTR(-ENFILE);
}

/*
 * Variant of alloc_empty_file() that doesn't check and modify nr_files.
 *
 * Should not be used unless there's a very good reason to do so.
 */
struct file *alloc_empty_file_noaccount(int flags, const struct cred *cred)
{
	struct file *f = __alloc_file(flags, cred);

	if (!IS_ERR(f))
		f->f_mode |= FMODE_NOACCOUNT;

	return f;
}

/**
 * alloc_file - allocate and initialize a 'struct file'
 *
 * @path: the (dentry, vfsmount) pair for the new file
 * @flags: O_... flags with which the new file will be opened
 * @fop: the 'struct file_operations' for the new file
 */
static struct file *alloc_file(const struct path *path, int flags,
		const struct file_operations *fop)
{
	struct file *file;

	file = alloc_empty_file(flags, current_cred());
	if (IS_ERR(file))
		return file;

	file->f_path = *path;
	file->f_inode = path->dentry->d_inode;
	file->f_mapping = path->dentry->d_inode->i_mapping;
	file->f_wb_err = filemap_sample_wb_err(file->f_mapping);
	file->f_sb_err = file_sample_sb_err(file);
	if ((file->f_mode & FMODE_READ) &&
	     likely(fop->read || fop->read_iter))
		file->f_mode |= FMODE_CAN_READ;
	if ((file->f_mode & FMODE_WRITE) &&
	     likely(fop->write || fop->write_iter))
		file->f_mode |= FMODE_CAN_WRITE;
	file->f_mode |= FMODE_OPENED;
	file->f_op = fop;
	if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
		i_readcount_inc(path->dentry->d_inode);
	return file;
}

struct file *alloc_file_pseudo(struct inode *inode, struct vfsmount *mnt,
				const char *name, int flags,
				const struct file_operations *fops)
{
	static const struct dentry_operations anon_ops = {
		.d_dname = simple_dname
	};
	struct qstr this = QSTR_INIT(name, strlen(name));
	struct path path;
	struct file *file;

	path.dentry = d_alloc_pseudo(mnt->mnt_sb, &this);
	if (!path.dentry)
		return ERR_PTR(-ENOMEM);
	if (!mnt->mnt_sb->s_d_op)
		d_set_d_op(path.dentry, &anon_ops);
	path.mnt = mntget(mnt);
	d_instantiate(path.dentry, inode);
	file = alloc_file(&path, flags, fops);
	if (IS_ERR(file)) {
		ihold(inode);
		path_put(&path);
	}
	return file;
}
EXPORT_SYMBOL(alloc_file_pseudo);

struct file *alloc_file_clone(struct file *base, int flags,
				const struct file_operations *fops)
{
	struct file *f = alloc_file(&base->f_path, flags, fops);
	if (!IS_ERR(f)) {
		path_get(&f->f_path);
		f->f_mapping = base->f_mapping;
	}
	return f;
}

/* the real guts of fput() - releasing the last reference to file
 */
static void __fput(struct file *file)
{
	struct dentry *dentry = file->f_path.dentry;
	struct vfsmount *mnt = file->f_path.mnt;
	struct inode *inode = file->f_inode;
	fmode_t mode = file->f_mode;

	if (unlikely(!(file->f_mode & FMODE_OPENED)))
		goto out;

	might_sleep();

	fsnotify_close(file);
	/*
	 * The function eventpoll_release() should be the first called
	 * in the file cleanup chain.
	 */
	eventpoll_release(file);
	locks_remove_file(file);

	ima_file_free(file);
	if (unlikely(file->f_flags & FASYNC)) {
		if (file->f_op->fasync)
			file->f_op->fasync(-1, file, 0);
	}
	if (file->f_op->release)
		file->f_op->release(inode, file);
	if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL &&
		     !(mode & FMODE_PATH))) {
		cdev_put(inode->i_cdev);
	}
	fops_put(file->f_op);
	put_pid(file->f_owner.pid);
	if ((mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
		i_readcount_dec(inode);
	if (mode & FMODE_WRITER) {
		put_write_access(inode);
		__mnt_drop_write(mnt);
	}
	dput(dentry);
	if (unlikely(mode & FMODE_NEED_UNMOUNT))
		dissolve_on_fput(mnt);
	mntput(mnt);
out:
	file_free(file);
}

static LLIST_HEAD(delayed_fput_list);
static void delayed_fput(struct work_struct *unused)
{
	struct llist_node *node = llist_del_all(&delayed_fput_list);
	struct file *f, *t;

	llist_for_each_entry_safe(f, t, node, f_u.fu_llist)
		__fput(f);
}

static void ____fput(struct callback_head *work)
{
	__fput(container_of(work, struct file, f_u.fu_rcuhead));
}

/*
 * If kernel thread really needs to have the final fput() it has done
 * to complete, call this.  The only user right now is the boot - we
 * *do* need to make sure our writes to binaries on initramfs has
 * not left us with opened struct file waiting for __fput() - execve()
 * won't work without that.  Please, don't add more callers without
 * very good reasons; in particular, never call that with locks
 * held and never call that from a thread that might need to do
 * some work on any kind of umount.
 */
void flush_delayed_fput(void)
{
	delayed_fput(NULL);
}
EXPORT_SYMBOL_GPL(flush_delayed_fput);

static DECLARE_DELAYED_WORK(delayed_fput_work, delayed_fput);

void fput_many(struct file *file, unsigned int refs)
{
	if (atomic_long_sub_and_test(refs, &file->f_count)) {
		struct task_struct *task = current;

		if (likely(!in_interrupt() && !(task->flags & PF_KTHREAD))) {
			init_task_work(&file->f_u.fu_rcuhead, ____fput);
			if (!task_work_add(task, &file->f_u.fu_rcuhead, TWA_RESUME))
				return;
			/*
			 * After this task has run exit_task_work(),
			 * task_work_add() will fail.  Fall through to delayed
			 * fput to avoid leaking *file.
			 */
		}

		if (llist_add(&file->f_u.fu_llist, &delayed_fput_list))
			schedule_delayed_work(&delayed_fput_work, 1);
	}
}

void fput(struct file *file)
{
	fput_many(file, 1);
}

/*
 * synchronous analog of fput(); for kernel threads that might be needed
 * in some umount() (and thus can't use flush_delayed_fput() without
 * risking deadlocks), need to wait for completion of __fput() and know
 * for this specific struct file it won't involve anything that would
 * need them.  Use only if you really need it - at the very least,
 * don't blindly convert fput() by kernel thread to that.
 */
void __fput_sync(struct file *file)
{
	if (atomic_long_dec_and_test(&file->f_count)) {
		struct task_struct *task = current;
		BUG_ON(!(task->flags & PF_KTHREAD));
		__fput(file);
	}
}

EXPORT_SYMBOL(fput);

void __init files_init(void)
{
	filp_cachep = kmem_cache_create("filp", sizeof(struct file), 0,
			SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL);
	percpu_counter_init(&nr_files, 0, GFP_KERNEL);
}

/*
 * One file with associated inode and dcache is very roughly 1K. Per default
 * do not use more than 10% of our memory for files.
 */
void __init files_maxfiles_init(void)
{
	unsigned long n;
	unsigned long nr_pages = totalram_pages();
	unsigned long memreserve = (nr_pages - nr_free_pages()) * 3/2;

	memreserve = min(memreserve, nr_pages - 1);
	n = ((nr_pages - memreserve) * (PAGE_SIZE / 1024)) / 10;

	files_stat.max_files = max_t(unsigned long, n, NR_FILE);
}
back to top