| b8108d6 | Roland Dreier | 04 November 2011, 16:36:04 UTC | Merge branches 'iser', 'mthca' and 'qib' into for-next | 04 November 2011, 16:36:04 UTC |
| 30ab7e2 | Mike Marciniszyn | 04 November 2011, 12:26:52 UTC | IB/qib: Fix panic in RC error flushing logic The following panic can occur when flushing a QP: RIP: 0010:[<ffffffffa0168e8b>] [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] RSP: 0018:ffff8803cdc6fc90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8803d84ba000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffffc90015a53430 RDI: ffff8803d84ba000 RBP: ffff8803cdc6fce0 R08: ffff8803cdc6fc90 R09: 0000000000000001 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8803d84ba0c0 R13: ffff8803d84ba5cc R14: 0000000000000800 R15: 0000000000000246 FS: 0000000000000000(0000) GS:ffff880036600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000034 CR3: 00000003e44f9000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qib/0 (pid: 1350, threadinfo ffff8803cdc6e000, task ffff88042728a100) Stack: 53544c5553455201 0000000100000005 0000000000000000 ffff8803d84ba000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000001 ffff8803cdc6fd30 ffffffffa0165d7a Call Trace: [<ffffffffa0165d7a>] qib_make_rc_req+0x36a/0xe80 [ib_qib] [<ffffffffa0165a10>] ? qib_make_rc_req+0x0/0xe80 [ib_qib] [<ffffffffa01698b3>] qib_do_send+0xf3/0xb60 [ib_qib] [<ffffffff814db757>] ? thread_return+0x4e/0x777 [<ffffffffa01697c0>] ? qib_do_send+0x0/0xb60 [ib_qib] [<ffffffff81088bf0>] worker_thread+0x170/0x2a0 [<ffffffff8108e530>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81088a80>] ? worker_thread+0x0/0x2a0 [<ffffffff8108e1c6>] kthread+0x96/0xa0 [<ffffffff8100c1ca>] child_rip+0xa/0x20 [<ffffffff8108e130>] ? kthread+0x0/0xa0 [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 RIP [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] The RC error state flush logic in qib_make_rc_req() could return all of the acked wqes and potentially have emptied the queue. It would then unconditionally try return a flush completion via qib_send_complete() for an invalid wqe, or worse a valid one that is not queued. The panic results when the completion code tries to maintain an MR reference count for a NULL MR. This fix modifies logic to only send one completion per qib_make_rc_req() call and changing the completion status from IB_WC_SUCCESS to IB_WC_WR_FLUSH_ERR as the completions progress. The outer loop will call as many times as necessary to flush the queue. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 04 November 2011, 16:35:44 UTC |
| 5243954 | Or Gerlitz | 03 November 2011, 22:21:27 UTC | IB/iser: DMA unmap TX bufs used for iSCSI/iSER headers The current driver never does DMA unmapping on these buffers. Fix that by adding DMA unmapping to the task cleanup callback, and DMA mapping to the task init function (drop the headers_initialized micro-optimization). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 04 November 2011, 16:32:44 UTC |
| 2c4ce60 | Or Gerlitz | 03 November 2011, 22:19:46 UTC | IB/iser: Use separate buffers for the login request/response The driver counted on the transactional nature of iSCSI login/text flows and used the same buffer for both the request and the response. We also went further and did DMA mapping only once, with DMA_FROM_DEVICE, which violates the DMA mapping API. Fix that by using different buffers, one for requests and one for responses, and use the correct DMA mapping direction for each. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com> | 04 November 2011, 16:30:52 UTC |
| e422131 | Roland Dreier | 04 November 2011, 00:48:25 UTC | IB/mthca: Fix buddy->num_free allocation size The num_free field of mthca_buddy has a type of array of unsigned int while it was allocated as an array of pointers. On 64-bit platforms this allocates twice more than required. Fix this by allocating the correct size for the type. This is the same bug just fixed in mlx4 by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Roland Dreier <roland@purestorage.com> | 04 November 2011, 00:48:25 UTC |
| f470f8d | Linus Torvalds | 01 November 2011, 17:51:38 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ... | 01 November 2011, 17:51:38 UTC |
| 504255f | Roland Dreier | 01 November 2011, 16:37:08 UTC | Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', 'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next | 01 November 2011, 16:37:08 UTC |
| dc47d38 | Linus Torvalds | 01 November 2011, 16:24:41 UTC | Merge git://github.com/herbertx/crypto * git://github.com/herbertx/crypto: (48 commits) crypto: user - Depend on NET instead of selecting it crypto: user - Add dependency on NET crypto: talitos - handle descriptor not found in error path crypto: user - Initialise match in crypto_alg_match crypto: testmgr - add twofish tests crypto: testmgr - add blowfish test-vectors crypto: Make hifn_795x build depend on !ARCH_DMA_ADDR_T_64BIT crypto: twofish-x86_64-3way - fix ctr blocksize to 1 crypto: blowfish-x86_64 - fix ctr blocksize to 1 crypto: whirlpool - count rounds from 0 crypto: Add userspace report for compress type algorithms crypto: Add userspace report for cipher type algorithms crypto: Add userspace report for rng type algorithms crypto: Add userspace report for pcompress type algorithms crypto: Add userspace report for nivaead type algorithms crypto: Add userspace report for aead type algorithms crypto: Add userspace report for givcipher type algorithms crypto: Add userspace report for ablkcipher type algorithms crypto: Add userspace report for blkcipher type algorithms crypto: Add userspace report for ahash type algorithms ... | 01 November 2011, 16:24:41 UTC |
| f6d90b4 | Eric W. Biederman | 01 November 2011, 14:06:17 UTC | sysfs: Make sysfs_rename safe with sysfs_dirents in rbtrees. In sysfs_rename we need to remove the optimization of not calling sysfs_unlink_sibling and sysfs_link_sibling if the renamed parent directory is not changing. This optimization is no longer valid now that sysfs dirents are stored in an rbtree sorted by name. Move the assignment of s_ns before the call of sysfs_link_sibling. With no sysfs_dirent fields changing after the call of sysfs_link_sibling this allows sysfs_link_sibling to take any of the directory entries into account when it builds the rbtrees, and s_ns looks like a prime canidate to be used in the rbtree in the future. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Greg KH <gregkh@suse.de> Cc: David Miller <davem@davemloft.net> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 16:16:14 UTC |
| c87d5d5 | Linus Torvalds | 01 November 2011, 14:48:13 UTC | Merge Qualcom Hexagon architecture This is the fifth version of the patchset (with one tiny whitespace fix) to the Linux kernel to support the Qualcomm Hexagon architecture. Between now and the next pull requests, Richard Kuo should have his key signed, etc., and should be back on kernel.org. In the meantime, this got merged as a emailed patch-series. * Hexagon: (36 commits) Add extra arch overrides to asm-generic/checksum.h Hexagon: Add self to MAINTAINERS Hexagon: Add basic stacktrace functionality for Hexagon architecture. Hexagon: Add configuration and makefiles for the Hexagon architecture. Hexagon: Comet platform support Hexagon: kgdb support files Hexagon: Add page-fault support. Hexagon: Add page table header files & etc. Hexagon: Add ioremap support Hexagon: Provide DMA implementation Hexagon: Implement basic TLB management routines for Hexagon. Hexagon: Implement basic cache-flush support Hexagon: Provide basic implementation and/or stubs for I/O routines. Hexagon: Add user access functions Hexagon: Add locking types and functions Hexagon: Add SMP support Hexagon: Provide basic debugging and system trap support. Hexagon: Add ptrace support Hexagon: Add time and timer functions Hexagon: Add interrupts ... | 01 November 2011, 14:48:13 UTC |
| 4e29198 | Linas Vepstas | 31 October 2011, 23:56:59 UTC | Add extra arch overrides to asm-generic/checksum.h There are plausible reasons for architectures to provide their own versions of csum_partial_copy_nocheck and csum_tcpudp_magic. By protecting these, the architecture can still re-use the asm-generic checksum.h, instead of copying it. Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:21 UTC |
| 4f4567c | Richard Kuo | 31 October 2011, 23:56:38 UTC | Hexagon: Add self to MAINTAINERS Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:21 UTC |
| 74d04d6 | Richard Kuo | 31 October 2011, 23:56:19 UTC | Hexagon: Add basic stacktrace functionality for Hexagon architecture. Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:21 UTC |
| e95bf45 | Richard Kuo | 31 October 2011, 23:55:58 UTC | Hexagon: Add configuration and makefiles for the Hexagon architecture. Signed-off-by: Linas Vepstas <linas@codeaurora.org> Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:21 UTC |
| 60e1323 | Richard Kuo | 31 October 2011, 23:55:25 UTC | Hexagon: Comet platform support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:21 UTC |
| 0d71e87 | Linas Vepstas | 31 October 2011, 23:54:43 UTC | Hexagon: kgdb support files Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:21 UTC |
| 499236d | Richard Kuo | 31 October 2011, 23:54:08 UTC | Hexagon: Add page-fault support. Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| a7e7984 | Richard Kuo | 31 October 2011, 23:53:38 UTC | Hexagon: Add page table header files & etc. Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| b7f3785 | Richard Kuo | 31 October 2011, 23:52:53 UTC | Hexagon: Add ioremap support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| 65c3d7c | Richard Kuo | 31 October 2011, 23:52:22 UTC | Hexagon: Provide DMA implementation Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| 5df87c1 | Richard Kuo | 31 October 2011, 23:52:00 UTC | Hexagon: Implement basic TLB management routines for Hexagon. Mostly all stubs, as the TLB is managed by the hypervisor. Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| 2d3cbc7 | Richard Kuo | 31 October 2011, 23:50:51 UTC | Hexagon: Implement basic cache-flush support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| 013bf24 | Richard Kuo | 31 October 2011, 23:48:50 UTC | Hexagon: Provide basic implementation and/or stubs for I/O routines. Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| 7567746 | Richard Kuo | 31 October 2011, 23:48:07 UTC | Hexagon: Add user access functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| dd472da | Richard Kuo | 31 October 2011, 23:47:33 UTC | Hexagon: Add locking types and functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| 43afdf5 | Richard Kuo | 31 October 2011, 23:46:34 UTC | Hexagon: Add SMP support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:20 UTC |
| cf9750b | Richard Kuo | 31 October 2011, 23:44:34 UTC | Hexagon: Provide basic debugging and system trap support. Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| 39e89c9 | Richard Kuo | 31 October 2011, 23:43:44 UTC | Hexagon: Add ptrace support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| 71e4a47 | Richard Kuo | 31 October 2011, 23:43:24 UTC | Hexagon: Add time and timer functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| 2ac211b | Richard Kuo | 31 October 2011, 23:42:51 UTC | Hexagon: Add interrupts Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| e03167b | Richard Kuo | 31 October 2011, 23:42:28 UTC | Hexagon: Add startup code Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| 4b30f96 | Richard Kuo | 31 October 2011, 23:41:49 UTC | Hexagon: Add init_task and process functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| cd5b61d | Richard Kuo | 31 October 2011, 23:41:21 UTC | Hexagon: Add signal functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| 98fb103 | Linas Vepstas | 31 October 2011, 23:40:46 UTC | Hexagon: Support dynamic module loading. Modules should be compiled as ordinary .o's; shared objects are not supported. Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| b39e293 | Linas Vepstas | 31 October 2011, 23:40:19 UTC | Hexagon: Export ksyms defined in assembly files. Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| e49ee29 | Richard Kuo | 31 October 2011, 23:39:14 UTC | Hexagon: Add hypervisor interface Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:19 UTC |
| c150290 | Richard Kuo | 31 October 2011, 23:38:38 UTC | Hexagon: Add memcpy and memset accelerated functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| 075a46a | Richard Kuo | 31 October 2011, 23:38:04 UTC | Hexagon: Add checksum functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| b784098 | Richard Kuo | 31 October 2011, 23:37:20 UTC | Hexagon: Add delay functions Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| 52f7102 | Richard Kuo | 31 October 2011, 23:36:46 UTC | Hexagon: Add threadinfo Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| 99a70aa | Richard Kuo | 31 October 2011, 23:36:04 UTC | Hexagon: Add processor and system headers Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| b9398a8 | Richard Kuo | 31 October 2011, 23:35:16 UTC | Hexagon: Add syscalls Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| 7508501 | Richard Kuo | 31 October 2011, 23:28:13 UTC | Hexagon: Add atomic ops support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| a86a7ce | Richard Kuo | 31 October 2011, 23:27:45 UTC | Hexagon: Add bitops support Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| 8feca0e | Richard Kuo | 31 October 2011, 23:27:03 UTC | Hexagon: Core arch-specific header files Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| cd8e65f | Richard Kuo | 31 October 2011, 23:26:34 UTC | Hexagon: Add generic headers Signed-off-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Linas Vepstas <linas@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 14:34:18 UTC |
| 5db017a | Herbert Xu | 01 November 2011, 01:12:43 UTC | crypto: user - Depend on NET instead of selecting it Selecting NET causes all sorts of issues, including a dependency loop involving bluetooth. This patch makes it a dependency instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 01 November 2011, 01:12:43 UTC |
| 094803e | Linus Torvalds | 01 November 2011, 00:46:07 UTC | Merge branch 'akpm' (Andrew's incoming) Quoth Andrew: - Most of MM. Still waiting for the poweroc guys to get off their butts and review some threaded hugepages patches. - alpha - vfs bits - drivers/misc - a few core kerenl tweaks - printk() features - MAINTAINERS updates - backlight merge - leds merge - various lib/ updates - checkpatch updates * akpm: (127 commits) epoll: fix spurious lockdep warnings checkpatch: add a --strict check for utf-8 in commit logs kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete llist-return-whether-list-is-empty-before-adding-in-llist_add-fix wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack fat: follow rename pack_hex_byte() to hex_byte_pack() security: follow rename pack_hex_byte() to hex_byte_pack() kgdb: follow rename pack_hex_byte() to hex_byte_pack() lib: rename pack_hex_byte() to hex_byte_pack() lib/string.c: fix strim() semantics for strings that have only blanks lib/idr.c: fix comment for ida_get_new_above() lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef lib/bitmap.c: quiet sparse noise about address space lib/spinlock_debug.c: print owner on spinlock lockup lib/kstrtox: common code between kstrto*() and simple_strto*() functions drivers/leds/leds-lp5521.c: check if reset is successful leds: turn the blink_timer off before starting to blink leds: save the delay values after a successful call to blink_set() drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing drivers/leds/leds-lm3530.c: add __devexit_p where needed ... | 01 November 2011, 00:46:07 UTC |
| d8805e6 | Nelson Elhage | 01 November 2011, 00:13:14 UTC | epoll: fix spurious lockdep warnings epoll can acquire recursively acquire ep->mtx on multiple "struct eventpoll"s at once in the case where one epoll fd is monitoring another epoll fd. This is perfectly OK, since we're careful about the lock ordering, but it causes spurious lockdep warnings. Annotate the recursion using mutex_lock_nested, and add a comment explaining the nesting rules for good measure. Recent versions of systemd are triggering this, and it can also be demonstrated with the following trivial test program: --------------------8<-------------------- int main(void) { int e1, e2; struct epoll_event evt = { .events = EPOLLIN }; e1 = epoll_create1(0); e2 = epoll_create1(0); epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt); return 0; } --------------------8<-------------------- Reported-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nelson Elhage <nelhage@nelhage.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 15662b3 | Joe Perches | 01 November 2011, 00:13:12 UTC | checkpatch: add a --strict check for utf-8 in commit logs Some find using utf-8 in commit logs inappropriate. Some patch commit logs contain unintended utf-8 characters when doing things like copy/pasting compilation output. Look for the start of any commit log by skipping initial lines that look like email headers and "From: " lines. Stop looking for utf-8 at the first signature line. Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 67d0a07 | Joe Perches | 01 November 2011, 00:13:10 UTC | kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions and macros as obsolete. Update checkpatch to warn about their use. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| fc23af3 | Andrew Morton | 01 November 2011, 00:13:08 UTC | llist-return-whether-list-is-empty-before-adding-in-llist_add-fix clarify comment Cc: Huang Ying <ying.huang@intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 67220a9 | Andy Shevchenko | 01 November 2011, 00:13:00 UTC | wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 0a90e0f | Andy Shevchenko | 01 November 2011, 00:12:57 UTC | fat: follow rename pack_hex_byte() to hex_byte_pack() There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 0247311 | Andy Shevchenko | 01 November 2011, 00:12:55 UTC | security: follow rename pack_hex_byte() to hex_byte_pack() There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 50e1499 | Andy Shevchenko | 01 November 2011, 00:12:51 UTC | kgdb: follow rename pack_hex_byte() to hex_byte_pack() There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 55036ba | Andy Shevchenko | 01 November 2011, 00:12:41 UTC | lib: rename pack_hex_byte() to hex_byte_pack() As suggested by Andrew Morton in [1] there is better to have most significant part first in the function name. [1] https://lkml.org/lkml/2011/9/20/22 There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 66f6958 | Michael Holzheu | 01 November 2011, 00:12:37 UTC | lib/string.c: fix strim() semantics for strings that have only blanks Commit 84c95c9acf0 ("string: on strstrip(), first remove leading spaces before running over str") improved the performance of the strim() function. Unfortunately this changed the semantics of strim() and broke my code. Before the patch it was possible to use strim() without using the return value for removing trailing spaces from strings that had either only blanks or only trailing blanks. Now this does not work any longer for strings that *only* have blanks. Before patch: " " -> "" (empty string) After patch: " " -> " " (no change) I think we should remove your patch to restore the old behavior. The description (lib/string.c): * Note that the first trailing whitespace is replaced with a %NUL-terminator => The first trailing whitespace of a string that only has whitespace characters is the first whitespace The patch restores the old strim() semantics. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Andre Goddard Rosa <andre.goddard@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| e3816c5 | Wang Sheng-Hui | 01 November 2011, 00:12:36 UTC | lib/idr.c: fix comment for ida_get_new_above() Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 3a8495c | Glauber Costa | 01 November 2011, 00:12:34 UTC | lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef These variables are only used when CONFIG_HOTPLUG_CPU is enabled, they are ifdef'ed everywhere else. So don't define them when CONFIG_HOTPLUG_CPU is not enabled. Signed-off-by: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| b9c321f | H Hartley Sweeten | 01 November 2011, 00:12:32 UTC | lib/bitmap.c: quiet sparse noise about address space __bitmap_parse() and __bitmap_parselist() both take a pointer to a kernel buffer as a parameter and then cast it to a pointer to user buffer for use in cases when the parameter is_user indicates that the buffer is actually located in user space. This casting, and the casts in the callers, results in sparse noise like the following: warning: incorrect type in initializer (different address spaces) expected char const [noderef] <asn:1>*ubuf got char const *buf warning: cast removes address space of expression Since these casts are intentional, use __force to quiet the noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Len Brown <len.brown@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 4e101b0 | Akinobu Mita | 01 November 2011, 00:12:29 UTC | lib/spinlock_debug.c: print owner on spinlock lockup When SPIN_BUG_ON is triggered, the lock owner information is reported. But it is omitted when spinlock lockup is detected. This information is useful especially on the architectures which don't implement trigger_all_cpu_backtrace() that is called just after detecting lockup. So report it and also avoid message format duplication. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 1dff46d | Alexey Dobriyan | 01 November 2011, 00:12:28 UTC | lib/kstrtox: common code between kstrto*() and simple_strto*() functions Currently termination logic (\0 or \n\0) is hardcoded in _kstrtoull(), avoid that for code reuse between kstrto*() and simple_strtoull(). Essentially, make them different only in termination logic. simple_strtoull() (and scanf(), BTW) ignores integer overflow, that's a bug we currently don't have guts to fix, making KSTRTOX_OVERFLOW hack necessary. Almost forgot: patch shrinks code size by about ~80 bytes on x86_64. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| b3c49c0 | Srinidhi KASAGAR | 01 November 2011, 00:12:24 UTC | drivers/leds/leds-lp5521.c: check if reset is successful Make sure that the reset is successful by issuing a dummy read to R channel current register and check its default value. On some platforms, without this dummy read, any further access to {R/G/B}_EXEC will not have any impact. [akpm@linux-foundation.org: fix up code comment] Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Naga Radhesh <naga.radheshy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 488bc35 | Antonio Ospite | 01 November 2011, 00:12:22 UTC | leds: turn the blink_timer off before starting to blink Depending on the implementation of the hardware blinking function in blink_set(), the led can support hardware blinking for some values of delay_on and delay_off and fall-back to software blinking for some other values. Turning off the blink_timer unconditionally before starting to blink make sure that a sequence like: OFF hardware blinking software blinking hardware blinking does not leave the software blinking timer active. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 6123b0e | Antonio Ospite | 01 November 2011, 00:12:19 UTC | leds: save the delay values after a successful call to blink_set() When calling the hardware blinking function implemented by blink_set(), the delay_on and delay_off values are not preserved across calls. Fix that and make the "timer" trigger work as expected when hardware blinking is available. BEFORE the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 0 0 $ echo 100 > delay_off $ cat delay_on delay_off 0 0 AFTER the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 100 0 $ echo 100 > delay_off $ cat delay_on delay_off 100 100 Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| dabc69c | David Daney | 01 November 2011, 00:12:17 UTC | drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing I get the following warning: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98() Modules linked in: Call Trace: [<ffffffff81440950>] dump_stack+0x8/0x34 [<ffffffff81141478>] warn_slowpath_common+0x78/0xa0 [<ffffffff812f0958>] __gpio_get_value+0x90/0x98 [<ffffffff81434f04>] create_gpio_led+0xdc/0x194 [<ffffffff8143524c>] gpio_led_probe+0x290/0x36c [<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0 [<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8 [<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0 [<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8 [<ffffffff8130f100>] driver_register+0x90/0x180 [<ffffffff81100438>] do_one_initcall+0x38/0x160 ---[ end trace ee38723fbefcd65c ]--- My GPIOs are on an I2C port expander, so we must use the *_cansleep() variant of the GPIO functions. This is was not being done in create_gpio_led(). We can change gpio_get_value() to gpio_get_value_cansleep() because it is only called from the platform_driver probe function, which is a context where we can sleep. Only tested on my gpio_cansleep() system, but it seems safe for all systems. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Trent Piepho <tpiepho@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 93f5398 | Axel Lin | 01 November 2011, 00:12:15 UTC | drivers/leds/leds-lm3530.c: add __devexit_p where needed According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for lm3530_remove(), so add __devexit_p to the `struct i2c_driver'. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| fa0ea0e | Axel Lin | 01 November 2011, 00:12:12 UTC | drivers/leds/leds-lp5521.c: avoid writing uninitialized value to LP5521_REG_OP_MODE register If lp5521_read fails, engine_state variable is not initialized. If lp5521_read fails, we should return error. This patch fixes below warning. CC drivers/leds/leds-lp5521.o drivers/leds/leds-lp5521.c: In function 'lp5521_set_engine_mode': drivers/leds/leds-lp5521.c:168: warning: 'engine_state' may be used uninitialized in this function [akpm@linux-foundation.org: remove unneeded "ret |="] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 2b67c95 | Magnus Damm | 01 November 2011, 00:12:09 UTC | drivers/leds/leds-renesas-tpu.c: move Renesas TPU LED driver platform data Use the platform_data include directory for the TPU LED driver, as suggested by Paul Mundt. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 02c3294 | Magnus Damm | 01 November 2011, 00:12:06 UTC | drivers/leds/leds-renesas-tpu.c: update driver to use workqueue Use a workqueue in the Renesas TPU LED driver to allow the Runtime PM code to sleep. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 3edc580 | Wolfram Sang | 01 November 2011, 00:12:03 UTC | drivers/leds/leds-lm3530.c: remove obsolete cleanup for clientdata A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| cba4c2a | Masakazu Mokuno | 01 November 2011, 00:11:59 UTC | drivers/leds/led-triggers.c: fix memory leak The memory for struct led_trigger should be kfreed in the led_trigger_register() error path. Also this function should return NULL on error. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| f59b6f9 | Magnus Damm | 01 November 2011, 00:11:55 UTC | leds: Renesas TPU LED driver Add V2 of the LED driver for a single timer channel for the TPU hardware block commonly found in Renesas SoCs. The driver has been written with optimal Power Management in mind, so to save power the LED is driven as a regular GPIO pin in case of maximum brightness and power off which allows the TPU hardware to be idle and which in turn allows the clocks to be stopped and the power domain to be turned off transparently. Any other brightness level requires use of the TPU hardware in PWM mode. TPU hardware device clocks and power are managed through Runtime PM. System suspend and resume is known to be working - during suspend the LED is set to off by the generic LED code. The TPU hardware timer is equipeed with a 16-bit counter together with an up-to-divide-by-64 prescaler which makes the hardware suitable for brightness control. Hardware blink is unsupported. The LED PWM waveform has been verified with a Fluke 123 Scope meter on a sh7372 Mackerel board. Tested with experimental sh7372 A3SP power domain patches. Platform device bind/unbind tested ok. V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM. [axel.lin@gmail.com: include linux/module.h] Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 1bff3a2 | Axel Lin | 01 November 2011, 00:11:52 UTC | backlight: rename corgibl_limit_intensity() to genericbl_limit_intensity() The rename of corgibl_limit_intensity is missed in commit d00ba726 ("backlight: Rename the corgi backlight driver to generic"). Let's fix it now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 4f5a66b | Fabio Estevam | 01 November 2011, 00:11:50 UTC | drivers/video/backlight/l4f00242t03.c: use gpio_request_one() to simplify error handling Using gpio_request_one can make the error handling simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 0556dc3 | Mark Brown | 01 November 2011, 00:11:48 UTC | backlight: fix broken regulator API usage in l4f00242t03 The regulator support in the l4f00242t03 is very non-idiomatic. Rather than requesting the regulators based on the device name and the supply names used by the device the driver requires boards to pass system specific supply names around through platform data. The driver also conditionally requests the regulators based on this platform data, adding unneeded conditional code to the driver. Fix this by removing the platform data and converting to the standard idiom, also updating all in tree users of the driver. As no datasheet appears to be available for the LCD I'm guessing the names for the supplies based on the existing users and I've no ability to do anything more than compile test. The use of regulator_set_voltage() in the driver is also problematic, since fixed voltages are required the expectation would be that the voltages would be fixed in the constraints set by the machines rather than manually configured by the driver, but is less problematic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 2967b0a | Wolfram Sang | 01 November 2011, 00:11:44 UTC | video/backlight: remove obsolete cleanup for clientdata A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 1330b0d | Jiri Kosina | 01 November 2011, 00:11:41 UTC | MAINTAINERS: add ASLR maintainer Since achieving the full ASLR by merging the PIE randomization in commit cc503c1b43 ("x86: PIE executable randomization"), I have been dealing with most (if not all) of the bugreports reported against userspace address space randomization, so it might be a good idea to provide a decent contact point in MAINTAINERS. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 03535ab | Linas Vepstas | 01 November 2011, 00:11:38 UTC | MAINTAINERS: Linas has moved While ego surfing, I noticed an email address problem. Signed-off-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| c41d5a1 | Ike Panhc | 01 November 2011, 00:11:37 UTC | MAINTAINERS: add new entry for ideapad-laptop Signed-off-by: Ike Panhc <ike.pan@canonical.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| b9075fa | Joe Perches | 01 November 2011, 00:11:33 UTC | treewide: use __printf not __attribute__((format(printf,...))) Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| ae29bc9 | William Douglas | 01 November 2011, 00:11:31 UTC | printk: remove bounds checking for log_prefix Currently log_prefix is testing that the first character of the log level and facility is less than '0' and greater than '9' (which is always false). Since the code being updated works because strtoul bombs out (endp isn't updated) and 0 is returned anyway just remove the check and don't change the behavior of the function. Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 48e4189 | William Douglas | 01 November 2011, 00:11:29 UTC | printk: fix bounds checking for log_prefix Currently log_prefix is testing that the first character of the log level and facility is less than '0' and greater than '9' (which is always false). It should be testing to see if the character less than '0' or greater than '9' instead. This patch makes that change. The code being changed worked because strtoul bombs out (endp isn't updated) and 0 is returned anyway. Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 134620f | Yanmin Zhang | 01 November 2011, 00:11:27 UTC | printk: add console_suspend module parameter We are enabling some power features on medfield. To test suspend-2-RAM conveniently, we need turn on/off console_suspend_enabled frequently. Add a module parameter, so users could change it by: /sys/module/printk/parameters/console_suspend Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 0eca6b7 | Yanmin Zhang | 01 November 2011, 00:11:25 UTC | printk: add module parameter ignore_loglevel to control ignore_loglevel We are enabling some power features on medfield. To test suspend-2-RAM conveniently, we need turn on/off ignore_loglevel frequently without rebooting. Add a module parameter, so users can change it by: /sys/module/printk/parameters/ignore_loglevel Signed-off-by: Yanmin Zhang <yanmin.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 73efc03 | Dan Ballard | 01 November 2011, 00:11:20 UTC | kernel/sysctl.c: add cap_last_cap to /proc/sys/kernel Userspace needs to know the highest valid capability of the running kernel, which right now cannot reliably be retrieved from the header files only. The fact that this value cannot be determined properly right now creates various problems for libraries compiled on newer header files which are run on older kernels. They assume capabilities are available which actually aren't. libcap-ng is one example. And we ran into the same problem with systemd too. Now the capability is exported in /proc/sys/kernel/cap_last_cap. [akpm@linux-foundation.org: make cap_last_cap const, per Ulrich] Signed-off-by: Dan Ballard <dan@mindstab.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Ulrich Drepper <drepper@akkadia.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 4ff8195 | Vasily Averin | 01 November 2011, 00:11:18 UTC | watchdog: move watchdog_*_all_cpus under CONFIG_SYSCTL Fix compilation warnings for CONFIG_SYSCTL=n: fixed compilation warnings in case of disabled CONFIG_SYSCTL kernel/watchdog.c:483:13: warning: `watchdog_enable_all_cpus' defined but not used kernel/watchdog.c:500:13: warning: `watchdog_disable_all_cpus' defined but not used these functions are static and are used only in sysctl handler, so move them inside #ifdef CONFIG_SYSCTL too Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| f445027 | Jeremy Fitzhardinge | 01 November 2011, 00:11:15 UTC | stop_machine: make stop_machine safe and efficient to call early Make stop_machine() safe to call early in boot, before SMP has been set up, by simply calling the callback function directly if there's only one CPU online. [ Fixes from AKPM: - add comment - local_irq_flags, not save_flags - also call hard_irq_disable() for systems which need it Tejun suggested using an explicit flag rather than just looking at the online cpu count. ] Cc: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| aaaa287 | Peter Korsgaard | 01 November 2011, 00:11:12 UTC | drivers/misc/ad525x_dpot-i2c.c: add i2c support for AD5161 Commit 6c536e4ce8e ("ad525x_dpot: add support for SPI parts") added support for the AD5161 through SPI, but the device supports both I2C and SPI (depending on the DIS pin), so add it to -i2c as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| e58a0f8 | Jonghwan Choi | 01 November 2011, 00:11:09 UTC | driver/misc/fsa9480.c fix potential null-pointer dereference Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| ec400c9 | Mark Brown | 01 November 2011, 00:11:07 UTC | lis3lv02d: make regulator API usage unconditional The regulator API contains a range of features for stubbing itself out when not in use and for transparently restricting the actual effect of regulator API calls where they can't be supported on a particular system so that drivers don't need to individually implement this. Simplify the driver slightly by making use of this idiom. The only in tree user is ecovec24 which does not use the regulator API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| 895c156 | Éric Piel | 01 November 2011, 00:11:05 UTC | lis3: remove the references to the global variable in core driver [ilkka.koskinen@nokia.com: fix arg to lis3->read()] Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Subject: lis3-remove-the-references-to-the-global-variable-in-core-driver-fix Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| e1e5687 | Éric Piel | 01 November 2011, 00:11:02 UTC | lis3: change exported function to use passed parameter Change exported functions to use the device given as parameter instead of the global one. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| d7f81d4 | Éric Piel | 01 November 2011, 00:10:58 UTC | lis3: use consistent naming of variables Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| 0021586 | Éric Piel | 01 November 2011, 00:10:54 UTC | lis3: free regulators if probe() fails Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| d0b6a97 | Éric Piel | 01 November 2011, 00:10:50 UTC | hp_accel: add HP ProBook 655x Add axis correction for HP ProBook 6555b. Signed-off-by: Malte Starostik <m-starostik@versanet.de> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| cdeaf62 | Éric Piel | 01 November 2011, 00:10:46 UTC | lis3: add support for HP EliteBook 8540w Add axis correction for HP EliteBook 8540w. Reported-by: Lyall Pearce <lyall.pearce@hp.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| a17b81b | Éric Piel | 01 November 2011, 00:10:43 UTC | lis3: add support for HP EliteBook 2730p Add axis correction for HP EliteBook 2730p. Tested-by: Witold Pilat <witold.pilat@gmail.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| bd35665 | Éric Piel | 01 November 2011, 00:10:41 UTC | lis3: update maintainer information In the move of the lis3 driver, the hp_accel.c file got dropped from the MAINTAINER file. Make it explicit again that this file is tied to lis3 again. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
