Revision bb4c7e9a9908548b458f34afb2fee74dc0d49f90 authored by Linus Torvalds on 23 February 2012, 23:38:57 UTC, committed by Linus Torvalds on 23 February 2012, 23:38:57 UTC
A fix from Jesper Juhl removes an assignment in an ASSERT when a compare is intended. Two fixes from Mitsuo Hayasaka address off-by-ones in XFS quota enforcement. * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: make inode quota check more general xfs: change available ranges of softlimit and hardlimit in quota check XFS: xfs_trans_add_item() - don't assign in ASSERT() when compare is intended
Makefile
# Unified Makefile for i386 and x86_64
# select defconfig based on actual architecture
ifeq ($(ARCH),x86)
KBUILD_DEFCONFIG := i386_defconfig
else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
export BITS
ifeq ($(CONFIG_X86_32),y)
BITS := 32
UTS_MACHINE := i386
CHECKFLAGS += -D__i386__
biarch := $(call cc-option,-m32)
KBUILD_AFLAGS += $(biarch)
KBUILD_CFLAGS += $(biarch)
ifdef CONFIG_RELOCATABLE
LDFLAGS_vmlinux := --emit-relocs
endif
KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
# prevent gcc from keeping the stack 16 byte aligned
KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
$(call cc-option,-fno-unit-at-a-time))
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/x86/Makefile_32.cpu
KBUILD_CFLAGS += $(cflags-y)
# temporary until string.h is fixed
KBUILD_CFLAGS += -ffreestanding
else
BITS := 64
UTS_MACHINE := x86_64
CHECKFLAGS += -D__x86_64__ -m64
KBUILD_AFLAGS += -m64
KBUILD_CFLAGS += -m64
# FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
cflags-$(CONFIG_MCORE2) += \
$(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mno-red-zone
KBUILD_CFLAGS += -mcmodel=kernel
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
KBUILD_CFLAGS += -maccumulate-outgoing-args
endif
ifdef CONFIG_CC_STACKPROTECTOR
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
stackp-y := -fstack-protector
KBUILD_CFLAGS += $(stackp-y)
else
$(warning stack protector enabled but no compiler support)
endif
endif
# Don't unroll struct assignments with kmemcheck enabled
ifeq ($(CONFIG_KMEMCHECK),y)
KBUILD_CFLAGS += $(call cc-option,-fno-builtin-memcpy)
endif
# Stackpointer is addressed different for 32 bit and 64 bit x86
sp-$(CONFIG_X86_32) := esp
sp-$(CONFIG_X86_64) := rsp
# do binutils support CFI?
cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
# is .cfi_signal_frame supported too?
cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)
# does binutils support specific instructions?
asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr)
KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr)
LDFLAGS := -m elf_$(UTS_MACHINE)
# Speed up the build
KBUILD_CFLAGS += -pipe
# Workaround for a gcc prelease that unfortunately was shipped in a suse release
KBUILD_CFLAGS += -Wno-sign-compare
#
KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
# prevent gcc from generating any FP code by mistake
KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
KBUILD_CFLAGS += $(mflags-y)
KBUILD_AFLAGS += $(mflags-y)
###
# Syscall table generation
archheaders:
$(Q)$(MAKE) $(build)=arch/x86/syscalls all
###
# Kernel objects
head-y := arch/x86/kernel/head_$(BITS).o
head-y += arch/x86/kernel/head$(BITS).o
head-y += arch/x86/kernel/head.o
head-y += arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
# See arch/x86/Kbuild for content of core part of the kernel
core-y += arch/x86/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
# must be linked after kernel/
drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/x86/power/
drivers-$(CONFIG_FB) += arch/x86/video/
####
# boot loader support. Several targets are kept for legacy purposes
boot := arch/x86/boot
BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
PHONY += bzImage $(BOOT_TARGETS)
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
KBUILD_IMAGE := $(boot)/bzImage
bzImage: vmlinux
ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
$(Q)$(MAKE) $(build)=arch/x86/tools posttest
endif
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += install
install:
$(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
archclean:
$(Q)rm -rf $(objtree)/arch/i386
$(Q)rm -rf $(objtree)/arch/x86_64
$(Q)$(MAKE) $(clean)=$(boot)
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
echo ' (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage288 - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)'
echo ' isoimage - Create a boot CD-ROM image (arch/x86/boot/image.iso)'
echo ' bzdisk/fdimage*/isoimage also accept:'
echo ' FDARGS="..." arguments for the booted kernel'
echo ' FDINITRD=file initrd for the booted kernel'
endef
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...