Revision bba0bdd7ad4713d82338bcd9b72d57e9335a664b authored by Bart Van Assche on 04 March 2015, 09:31:47 UTC, committed by James Bottomley on 08 April 2015, 16:41:41 UTC
SCSI transport drivers and SCSI LLDs block a SCSI device if the transport layer is not operational. This means that in this state no requests should be processed, even if the REQ_PREEMPT flag has been set. This patch avoids that a rescan shortly after a cable pull sporadically triggers the following kernel oops: BUG: unable to handle kernel paging request at ffffc9001a6bc084 IP: [<ffffffffa04e08f2>] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib] Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100) Call Trace: [<ffffffffa0718135>] srp_post_send+0x65/0x70 [ib_srp] [<ffffffffa071b9df>] srp_queuecommand+0x1cf/0x3e0 [ib_srp] [<ffffffffa0001ff1>] scsi_dispatch_cmd+0x101/0x280 [scsi_mod] [<ffffffffa0009ad1>] scsi_request_fn+0x411/0x4d0 [scsi_mod] [<ffffffff81223b37>] __blk_run_queue+0x27/0x30 [<ffffffff8122a8d2>] blk_execute_rq_nowait+0x82/0x110 [<ffffffff8122a9c2>] blk_execute_rq+0x62/0xf0 [<ffffffffa000b0e8>] scsi_execute+0xe8/0x190 [scsi_mod] [<ffffffffa000b2f3>] scsi_execute_req+0xa3/0x130 [scsi_mod] [<ffffffffa000c1aa>] scsi_probe_lun+0x17a/0x450 [scsi_mod] [<ffffffffa000ce86>] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod] [<ffffffffa000dc2f>] __scsi_scan_target+0xdf/0x1f0 [scsi_mod] [<ffffffffa000dfa3>] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod] [<ffffffffa000edfb>] scsi_scan+0xdb/0xe0 [scsi_mod] [<ffffffffa000ee13>] store_scan+0x13/0x20 [scsi_mod] [<ffffffff811c8d9b>] sysfs_write_file+0xcb/0x160 [<ffffffff811589de>] vfs_write+0xce/0x140 [<ffffffff81158b53>] sys_write+0x53/0xa0 [<ffffffff81464592>] system_call_fastpath+0x16/0x1b [<00007f611c9d9300>] 0x7f611c9d92ff Reported-by: Max Gurtuvoy <maxg@mellanox.com> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
1 parent 2e7cee0
oid_registry.c
/* ASN.1 Object identifier (OID) registry
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/export.h>
#include <linux/oid_registry.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/bug.h>
#include "oid_registry_data.c"
MODULE_DESCRIPTION("OID Registry");
MODULE_AUTHOR("Red Hat, Inc.");
MODULE_LICENSE("GPL");
/**
* look_up_OID - Find an OID registration for the specified data
* @data: Binary representation of the OID
* @datasize: Size of the binary representation
*/
enum OID look_up_OID(const void *data, size_t datasize)
{
const unsigned char *octets = data;
enum OID oid;
unsigned char xhash;
unsigned i, j, k, hash;
size_t len;
/* Hash the OID data */
hash = datasize - 1;
for (i = 0; i < datasize; i++)
hash += octets[i] * 33;
hash = (hash >> 24) ^ (hash >> 16) ^ (hash >> 8) ^ hash;
hash &= 0xff;
/* Binary search the OID registry. OIDs are stored in ascending order
* of hash value then ascending order of size and then in ascending
* order of reverse value.
*/
i = 0;
k = OID__NR;
while (i < k) {
j = (i + k) / 2;
xhash = oid_search_table[j].hash;
if (xhash > hash) {
k = j;
continue;
}
if (xhash < hash) {
i = j + 1;
continue;
}
oid = oid_search_table[j].oid;
len = oid_index[oid + 1] - oid_index[oid];
if (len > datasize) {
k = j;
continue;
}
if (len < datasize) {
i = j + 1;
continue;
}
/* Variation is most likely to be at the tail end of the
* OID, so do the comparison in reverse.
*/
while (len > 0) {
unsigned char a = oid_data[oid_index[oid] + --len];
unsigned char b = octets[len];
if (a > b) {
k = j;
goto next;
}
if (a < b) {
i = j + 1;
goto next;
}
}
return oid;
next:
;
}
return OID__NR;
}
EXPORT_SYMBOL_GPL(look_up_OID);
/*
* sprint_OID - Print an Object Identifier into a buffer
* @data: The encoded OID to print
* @datasize: The size of the encoded OID
* @buffer: The buffer to render into
* @bufsize: The size of the buffer
*
* The OID is rendered into the buffer in "a.b.c.d" format and the number of
* bytes is returned. -EBADMSG is returned if the data could not be intepreted
* and -ENOBUFS if the buffer was too small.
*/
int sprint_oid(const void *data, size_t datasize, char *buffer, size_t bufsize)
{
const unsigned char *v = data, *end = v + datasize;
unsigned long num;
unsigned char n;
size_t ret;
int count;
if (v >= end)
return -EBADMSG;
n = *v++;
ret = count = snprintf(buffer, bufsize, "%u.%u", n / 40, n % 40);
buffer += count;
bufsize -= count;
if (bufsize == 0)
return -ENOBUFS;
while (v < end) {
num = 0;
n = *v++;
if (!(n & 0x80)) {
num = n;
} else {
num = n & 0x7f;
do {
if (v >= end)
return -EBADMSG;
n = *v++;
num <<= 7;
num |= n & 0x7f;
} while (n & 0x80);
}
ret += count = snprintf(buffer, bufsize, ".%lu", num);
buffer += count;
bufsize -= count;
if (bufsize == 0)
return -ENOBUFS;
}
return ret;
}
EXPORT_SYMBOL_GPL(sprint_oid);
/**
* sprint_OID - Print an Object Identifier into a buffer
* @oid: The OID to print
* @buffer: The buffer to render into
* @bufsize: The size of the buffer
*
* The OID is rendered into the buffer in "a.b.c.d" format and the number of
* bytes is returned.
*/
int sprint_OID(enum OID oid, char *buffer, size_t bufsize)
{
int ret;
BUG_ON(oid >= OID__NR);
ret = sprint_oid(oid_data + oid_index[oid],
oid_index[oid + 1] - oid_index[oid],
buffer, bufsize);
BUG_ON(ret == -EBADMSG);
return ret;
}
EXPORT_SYMBOL_GPL(sprint_OID);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...