Revision bc8fbc5f305aecf63423da91e5faf4c0ce40bf38 authored by Marco Elver on 26 February 2021, 01:19:31 UTC, committed by Linus Torvalds on 26 February 2021, 17:41:02 UTC
Add KFENCE test suite, testing various error detection scenarios. Makes use of KUnit for test organization. Since KFENCE's interface to obtain error reports is via the console, the test verifies that KFENCE outputs expected reports to the console. [elver@google.com: fix typo in test] Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com [elver@google.com: show access type in report] Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 10efe55
config
#!/usr/bin/env bash
# SPDX-License-Identifier: GPL-2.0
# Manipulate options in a .config file from the command line
myname=${0##*/}
# If no prefix forced, use the default CONFIG_
CONFIG_="${CONFIG_-CONFIG_}"
# We use an uncommon delimiter for sed substitutions
SED_DELIM=$(echo -en "\001")
usage() {
cat >&2 <<EOL
Manipulate options in a .config file from the command line.
Usage:
$myname options command ...
commands:
--enable|-e option Enable option
--disable|-d option Disable option
--module|-m option Turn option into a module
--set-str option string
Set option to "string"
--set-val option value
Set option to value
--undefine|-u option Undefine option
--state|-s option Print state of option (n,y,m,undef)
--enable-after|-E beforeopt option
Enable option directly after other option
--disable-after|-D beforeopt option
Disable option directly after other option
--module-after|-M beforeopt option
Turn option into module directly after other option
commands can be repeated multiple times
options:
--file config-file .config file to change (default .config)
--keep-case|-k Keep next symbols' case (dont' upper-case it)
$myname doesn't check the validity of the .config file. This is done at next
make time.
By default, $myname will upper-case the given symbol. Use --keep-case to keep
the case of all following symbols unchanged.
$myname uses 'CONFIG_' as the default symbol prefix. Set the environment
variable CONFIG_ to the prefix to use. Eg.: CONFIG_="FOO_" $myname ...
EOL
exit 1
}
checkarg() {
ARG="$1"
if [ "$ARG" = "" ] ; then
usage
fi
case "$ARG" in
${CONFIG_}*)
ARG="${ARG/${CONFIG_}/}"
;;
esac
if [ "$MUNGE_CASE" = "yes" ] ; then
ARG="`echo $ARG | tr a-z A-Z`"
fi
}
txt_append() {
local anchor="$1"
local insert="$2"
local infile="$3"
local tmpfile="$infile.swp"
# sed append cmd: 'a\' + newline + text + newline
cmd="$(printf "a\\%b$insert" "\n")"
sed -e "/$anchor/$cmd" "$infile" >"$tmpfile"
# replace original file with the edited one
mv "$tmpfile" "$infile"
}
txt_subst() {
local before="$1"
local after="$2"
local infile="$3"
local tmpfile="$infile.swp"
sed -e "s$SED_DELIM$before$SED_DELIM$after$SED_DELIM" "$infile" >"$tmpfile"
# replace original file with the edited one
mv "$tmpfile" "$infile"
}
txt_delete() {
local text="$1"
local infile="$2"
local tmpfile="$infile.swp"
sed -e "/$text/d" "$infile" >"$tmpfile"
# replace original file with the edited one
mv "$tmpfile" "$infile"
}
set_var() {
local name=$1 new=$2 before=$3
name_re="^($name=|# $name is not set)"
before_re="^($before=|# $before is not set)"
if test -n "$before" && grep -Eq "$before_re" "$FN"; then
txt_append "^$before=" "$new" "$FN"
txt_append "^# $before is not set" "$new" "$FN"
elif grep -Eq "$name_re" "$FN"; then
txt_subst "^$name=.*" "$new" "$FN"
txt_subst "^# $name is not set" "$new" "$FN"
else
echo "$new" >>"$FN"
fi
}
undef_var() {
local name=$1
txt_delete "^$name=" "$FN"
txt_delete "^# $name is not set" "$FN"
}
if [ "$1" = "--file" ]; then
FN="$2"
if [ "$FN" = "" ] ; then
usage
fi
shift 2
else
FN=.config
fi
if [ "$1" = "" ] ; then
usage
fi
MUNGE_CASE=yes
while [ "$1" != "" ] ; do
CMD="$1"
shift
case "$CMD" in
--keep-case|-k)
MUNGE_CASE=no
continue
;;
--refresh)
;;
--*-after|-E|-D|-M)
checkarg "$1"
A=$ARG
checkarg "$2"
B=$ARG
shift 2
;;
-*)
checkarg "$1"
shift
;;
esac
case "$CMD" in
--enable|-e)
set_var "${CONFIG_}$ARG" "${CONFIG_}$ARG=y"
;;
--disable|-d)
set_var "${CONFIG_}$ARG" "# ${CONFIG_}$ARG is not set"
;;
--module|-m)
set_var "${CONFIG_}$ARG" "${CONFIG_}$ARG=m"
;;
--set-str)
# sed swallows one level of escaping, so we need double-escaping
set_var "${CONFIG_}$ARG" "${CONFIG_}$ARG=\"${1//\"/\\\\\"}\""
shift
;;
--set-val)
set_var "${CONFIG_}$ARG" "${CONFIG_}$ARG=$1"
shift
;;
--undefine|-u)
undef_var "${CONFIG_}$ARG"
;;
--state|-s)
if grep -q "# ${CONFIG_}$ARG is not set" $FN ; then
echo n
else
V="$(grep "^${CONFIG_}$ARG=" $FN)"
if [ $? != 0 ] ; then
echo undef
else
V="${V/#${CONFIG_}$ARG=/}"
V="${V/#\"/}"
V="${V/%\"/}"
V="${V//\\\"/\"}"
echo "${V}"
fi
fi
;;
--enable-after|-E)
set_var "${CONFIG_}$B" "${CONFIG_}$B=y" "${CONFIG_}$A"
;;
--disable-after|-D)
set_var "${CONFIG_}$B" "# ${CONFIG_}$B is not set" "${CONFIG_}$A"
;;
--module-after|-M)
set_var "${CONFIG_}$B" "${CONFIG_}$B=m" "${CONFIG_}$A"
;;
# undocumented because it ignores --file (fixme)
--refresh)
yes "" | make oldconfig
;;
*)
echo "bad command: $CMD" >&2
usage
;;
esac
done
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...