https://github.com/geodynamics/citcoms
Revision bcf06ab870d4cfd4a7c8594146ed51e41b23d5f9 authored by Eh Tan on 09 August 2007, 22:57:28 UTC, committed by Eh Tan on 09 August 2007, 22:57:28 UTC
Two non-dimensional parameters are added: "dissipation_number" and "gruneisen"
under the Solver component. One can use the original incompressible solver by
setting "gruneisen=0". The code will treat this as "gruneisen=infinity". 
Setting non-zero value to "gruneisen" will switch to compressible solver.

One can use the TALA solver for incompressible case by setting "gruneisen" to
a non-zero value while setting "dissipation_number=0". This is useful when
debugging the compressible solver.

Two implementations are available: one by Wei Leng (U. Colorado) and one by
Eh Tan (CIG). Leng's version uses the original conjugate gradient method for
the Uzawa iteration and moves the contribution of compressibility to the RHS,
similar to the method of Ita and King, JGR, 1994. Tan's version uses the
bi-conjugate gradient stablized method for the Uzawa iteration, similar to the
method of Tan and Gurnis, JGR, 2007. Both versions agree very well. In the
benchmark case, 33x33x33 nodes per cap, Di/gamma=1.0, Ra=1.0, delta function
of load at the mid mantle, the peak velocity differs by only 0.007%. Leng's
version is enabled by default. Edit function solve_Ahat_p_fhat() in
lib/Stokes_flow_Incomp.c to switch to Tan's version.

1 parent 91bcb85
Raw File
Tip revision: bcf06ab870d4cfd4a7c8594146ed51e41b23d5f9 authored by Eh Tan on 09 August 2007, 22:57:28 UTC
Finished the compressible Stokes solver for TALA.
Tip revision: bcf06ab
test5.sh
#!/bin/sh
#
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#
#<LicenseText>
#
# CitcomS.py by Eh Tan, Eun-seo Choi, and Pururav Thoutireddy.
# Copyright (C) 2002-2005, California Institute of Technology.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
#</LicenseText>
#
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#

# coupled citcoms test
# 2-proc coarse-grid solver, 2-proc fine-grid solver


FINE=fine
COARSE=coarse
OUTPUT=zzz

rm $FINE.* $COARSE.*


./coupledcitcoms.sh  \
--launcher.nodes=4 \
--launcher.nodegen="n%03d" \
--launcher.nodelist=[171-172,171-172] \
\
--layout.coarse=[0-1] \
--layout.fine=[2-3] \
\
--coarse=regional \
--coarse.mesher=regional-sphere \
--coarse.datafile=$COARSE \
--coarse.mesher.nprocx=1 \
--coarse.mesher.nprocy=1 \
--coarse.mesher.nprocz=2 \
--coarse.mesher.nodex=5 \
--coarse.mesher.nodey=5 \
--coarse.mesher.nodez=5 \
--coarse.mesher.theta_max=1.7 \
--coarse.mesher.theta_min=1.4 \
--coarse.mesher.fi_max=1.3 \
--coarse.mesher.fi_min=1.0 \
--coarse.mesher.radius_inner=0.5 \
--coarse.mesher.radius_outer=1.0 \
\
--fine.mesher.nprocz=2 \
--fine.datafile=$FINE \
--fine.mesher.nodex=5 \
--fine.mesher.nodey=5 \
--fine.mesher.nodez=7 \
--fine.mesher.theta_max=1.6 \
--fine.mesher.theta_min=1.5 \
--fine.mesher.fi_max=1.2 \
--fine.mesher.fi_min=1.1 \
--fine.mesher.radius_inner=0.7 \
--fine.mesher.radius_outer=0.9 \
\
--fine.bc.side_sbcs=on \
\
--coarse.vsolver.accuracy=1e-3 \
--coarse.vsolver.tole_compressibility=1e-3 \
--fine.vsolver.accuracy=1e-3 \
--fine.vsolver.tole_compressibility=1e-3 \
\
--fge.excludeTop=on \
--fge.excludeBottom=on \
\
--steps=1 \
--controller.monitoringFrequency=1 \
\
--journal.debug.Exchanger=on \
--journal.debug.CitcomS-Exchanger=on \
\
--journal.info.CitcomS-Interior-BBox=off \
--journal.info.CitcomS-Boundary-BBox=off \
--journal.info.CitcomS-Boundary-X=on \
--journal.info.CitcomS-Boundary-normal=on \
\
#| tee $OUTPUT

#> $OUTPUT



# version
# $Id$

# End of file
back to top